From: Michael Hennerich <[email protected]>
Now that all Blackfin boards are using the board resources, we don't need
to keep the arch/board specific crap in the driver header.
Signed-off-by: Michael Hennerich <[email protected]>
Signed-off-by: Mike Frysinger <[email protected]>
---
drivers/net/smc91x.h | 28 ----------------------------
1 files changed, 0 insertions(+), 28 deletions(-)
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 57a159f..9c8c6ed 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -83,34 +83,6 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
}
}
-#elif defined(CONFIG_BLACKFIN)
-
-#define SMC_IRQ_FLAGS IRQF_TRIGGER_HIGH
-#define RPC_LSA_DEFAULT RPC_LED_100_10
-#define RPC_LSB_DEFAULT RPC_LED_TX_RX
-
-#define SMC_CAN_USE_8BIT 0
-#define SMC_CAN_USE_16BIT 1
-# if defined(CONFIG_BF561)
-#define SMC_CAN_USE_32BIT 1
-# else
-#define SMC_CAN_USE_32BIT 0
-# endif
-#define SMC_IO_SHIFT 0
-#define SMC_NOWAIT 1
-#define SMC_USE_BFIN_DMA 0
-
-#define SMC_inw(a, r) readw((a) + (r))
-#define SMC_outw(v, a, r) writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-# if SMC_CAN_USE_32BIT
-#define SMC_inl(a, r) readl((a) + (r))
-#define SMC_outl(v, a, r) writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
-# endif
-
#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
/* We can only do 16-bit reads and writes in the static memory space. */
--
1.6.4.2
From: Mike Frysinger <[email protected]>
Date: Mon, 14 Sep 2009 14:03:42 -0400
> From: Michael Hennerich <[email protected]>
>
> Now that all Blackfin boards are using the board resources, we don't need
> to keep the arch/board specific crap in the driver header.
>
> Signed-off-by: Michael Hennerich <[email protected]>
> Signed-off-by: Mike Frysinger <[email protected]>
Applied.