Use the newly added netdev_<level> and netif_<level> logging macros
in some of the drivers.
Adds some message logging consistency.
pci-skeleton had a checkpatch style cleaning as well.
Joe Perches (15):
drivers/net/8139cp.c: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/8139too.c: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/bnx2.c: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/cassini.c: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/cnic.c: Use (pr|netdev)_<level> macro helpers
drivers/net/pci-skeleton.c: Use (pr|netdev|netif)_<level> macro
helpers
drivers/net/sis190.c: Use (pr|netdev|netif)_<level> macro helpers
drivers/net/skge.c: Use (pr|netdev)_<level> macro helpers
drivers/net/skge.c: Use (pr|netdev)_<level> macro helpers
drivers/net/sky2.c: Use (pr|netdev)_<level> macro helpers
drivers/net/tg3.c: Use (pr|netdev)_<level> macro helpers
drivers/net/typhoon.c: Use (pr|netdev)_<level> macro helpers
drivers/net/yellowfin.c: Use (pr|netdev)_<level> macro helpers
drivers/net/8139cp.c | 72 ++--
drivers/net/8139too.c | 187 ++++-----
drivers/net/b44.c | 72 ++--
drivers/net/bnx2.c | 145 +++----
drivers/net/bnx2x.h | 49 ++-
drivers/net/bnx2x_link.c | 21 +-
drivers/net/bnx2x_main.c | 185 ++++-----
drivers/net/cassini.c | 361 +++++++---------
drivers/net/cnic.c | 87 ++---
drivers/net/pci-skeleton.c | 1019 ++++++++++++++++++++++----------------------
drivers/net/sis190.c | 152 ++++----
drivers/net/skge.c | 131 +++---
drivers/net/sky2.c | 63 ++--
drivers/net/tg3.c | 261 +++++-------
drivers/net/typhoon.c | 162 ++++----
drivers/net/yellowfin.c | 162 ++++----
16 files changed, 1431 insertions(+), 1698 deletions(-)
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/b44.c | 72 ++++++++++++++++++++++------------------------------
1 files changed, 31 insertions(+), 41 deletions(-)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index f21cbe6..180510e 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -10,6 +10,8 @@
* Distribute under GPL.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -34,7 +36,6 @@
#include "b44.h"
#define DRV_MODULE_NAME "b44"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "2.0"
#define B44_DEF_MSG_ENABLE \
@@ -190,12 +191,9 @@ static int b44_wait_bit(struct b44 *bp, unsigned long reg,
}
if (i == timeout) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: BUG! Timeout waiting for bit "
- "%08x of register "
- "%lx to %s.\n",
- bp->dev->name,
- bit, reg,
- (clear ? "clear" : "set"));
+ netdev_err(bp->dev, "BUG! Timeout waiting for bit %08x of register %lx to %s\n",
+ bit, reg, clear ? "clear" : "set");
+
return -ENODEV;
}
return 0;
@@ -335,8 +333,7 @@ static int b44_phy_reset(struct b44 *bp)
err = b44_readphy(bp, MII_BMCR, &val);
if (!err) {
if (val & BMCR_RESET) {
- printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
- bp->dev->name);
+ netdev_err(bp->dev, "PHY Reset would not complete\n");
err = -ENODEV;
}
}
@@ -415,7 +412,7 @@ static void b44_wap54g10_workaround(struct b44 *bp)
}
return;
error:
- printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n");
+ pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
}
#else
static inline void b44_wap54g10_workaround(struct b44 *bp)
@@ -508,18 +505,15 @@ static void b44_stats_update(struct b44 *bp)
static void b44_link_report(struct b44 *bp)
{
if (!netif_carrier_ok(bp->dev)) {
- printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
+ netdev_info(bp->dev, "Link is down\n");
} else {
- printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
- bp->dev->name,
- (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
- (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
-
- printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
- "%s for RX.\n",
- bp->dev->name,
- (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
- (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
+ netdev_info(bp->dev, "Link is up at %d Mbps, %s duplex\n",
+ (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
+ (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
+
+ netdev_info(bp->dev, "Flow control is %s for TX and %s for RX\n",
+ (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
+ (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
}
}
@@ -578,11 +572,9 @@ static void b44_check_phy(struct b44 *bp)
}
if (bmsr & BMSR_RFAULT)
- printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
- bp->dev->name);
+ netdev_warn(bp->dev, "Remote fault detected in PHY\n");
if (bmsr & BMSR_JCD)
- printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
- bp->dev->name);
+ netdev_warn(bp->dev, "Jabber detected in PHY\n");
}
}
@@ -903,7 +895,7 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id)
handled = 1;
if (unlikely(!netif_running(dev))) {
- printk(KERN_INFO "%s: late interrupt.\n", dev->name);
+ netdev_info(dev, "late interrupt\n");
goto irq_ack;
}
@@ -928,8 +920,7 @@ static void b44_tx_timeout(struct net_device *dev)
{
struct b44 *bp = netdev_priv(dev);
- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
+ netdev_err(dev, "transmit timed out, resetting\n");
spin_lock_irq(&bp->lock);
@@ -958,8 +949,7 @@ static netdev_tx_t b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* This is a hard error, log it. */
if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
netif_stop_queue(dev);
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
goto err_out;
}
@@ -1335,7 +1325,7 @@ static void b44_halt(struct b44 *bp)
/* reset PHY */
b44_phy_reset(bp);
/* power down PHY */
- printk(KERN_INFO PFX "%s: powering down PHY\n", bp->dev->name);
+ netdev_info(bp->dev, "powering down PHY\n");
bw32(bp, B44_MAC_CTRL, MAC_CTRL_PHY_PDOWN);
/* now reset the chip, but without enabling the MAC&PHY
* part of it. This has to be done _after_ we shut down the PHY */
@@ -1526,7 +1516,7 @@ static void b44_setup_pseudo_magicp(struct b44 *bp)
pwol_pattern = kzalloc(B44_PATTERN_SIZE, GFP_KERNEL);
if (!pwol_pattern) {
- printk(KERN_ERR PFX "Memory not available for WOL\n");
+ pr_err("Memory not available for WOL\n");
return;
}
@@ -2099,7 +2089,7 @@ static int __devinit b44_get_invariants(struct b44 *bp)
memcpy(bp->dev->dev_addr, addr, 6);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
- printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n");
+ pr_err("Invalid MAC address found in EEPROM\n");
return -EINVAL;
}
@@ -2144,12 +2134,12 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
instance++;
if (b44_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
dev = alloc_etherdev(sizeof(*bp));
if (!dev) {
- dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n");
+ dev_err(sdev->dev, "Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto out;
}
@@ -2188,13 +2178,13 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
if (err) {
dev_err(sdev->dev,
- "Required 30BIT DMA mask unsupported by the system.\n");
+ "Required 30BIT DMA mask unsupported by the system\n");
goto err_out_powerdown;
}
err = b44_get_invariants(bp);
if (err) {
dev_err(sdev->dev,
- "Problem fetching invariants of chip, aborting.\n");
+ "Problem fetching invariants of chip, aborting\n");
goto err_out_powerdown;
}
@@ -2214,7 +2204,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
err = register_netdev(dev);
if (err) {
- dev_err(sdev->dev, "Cannot register net device, aborting.\n");
+ dev_err(sdev->dev, "Cannot register net device, aborting\n");
goto err_out_powerdown;
}
@@ -2225,8 +2215,8 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
*/
b44_chip_reset(bp, B44_CHIP_RESET_FULL);
- printk(KERN_INFO "%s: Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
- dev->name, dev->dev_addr);
+ netdev_info(dev, "Broadcom 44xx/47xx 10/100BaseT Ethernet %pM\n",
+ dev->dev_addr);
return 0;
@@ -2299,7 +2289,7 @@ static int b44_resume(struct ssb_device *sdev)
rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev);
if (rc) {
- printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name);
+ netdev_err(dev, "request_irq failed\n");
return rc;
}
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Convert formats like %8.8 to %08
Remove periods from formats
Coalesce long formats
Use print_hex_dump
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/8139too.c | 187 +++++++++++++++++++++----------------------------
1 files changed, 81 insertions(+), 106 deletions(-)
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index c7d6f09..b4efc91 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -89,6 +89,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "8139too"
#define DRV_VERSION "0.9.28"
@@ -111,7 +113,6 @@
#include <asm/irq.h>
#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
-#define PFX DRV_NAME ": "
/* Default Message level */
#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
@@ -130,9 +131,9 @@
# define assert(expr) do {} while (0)
#else
# define assert(expr) \
- if(unlikely(!(expr))) { \
- pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
- #expr, __FILE__, __func__, __LINE__); \
+ if (unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
}
#endif
@@ -957,7 +958,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
- pr_info("8139too: OQO Model 2 detected. Forcing PIO\n");
+ pr_info("OQO Model 2 detected. Forcing PIO\n");
use_io = 1;
}
@@ -1010,21 +1011,19 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
tp->mii.reg_num_mask = 0x1f;
/* dev is fully set up and ready to use now */
- pr_debug("about to register device named %s (%p)...\n", dev->name, dev);
+ pr_debug("about to register device named %s (%p)...\n",
+ dev->name, dev);
i = register_netdev (dev);
if (i) goto err_out;
pci_set_drvdata (pdev, dev);
- pr_info("%s: %s at 0x%lx, %pM, IRQ %d\n",
- dev->name,
- board_info[ent->driver_data].name,
- dev->base_addr,
- dev->dev_addr,
- dev->irq);
+ netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+ board_info[ent->driver_data].name,
+ dev->base_addr, dev->dev_addr, dev->irq);
- pr_debug("%s: Identified 8139 chip type '%s'\n",
- dev->name, rtl_chip_info[tp->chipset].name);
+ netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
+ rtl_chip_info[tp->chipset].name);
/* Find the connected MII xcvrs.
Doing this in open() would allow detecting external xcvrs later, but
@@ -1037,13 +1036,12 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
if (mii_status != 0xffff && mii_status != 0x0000) {
u16 advertising = mdio_read(dev, phy, 4);
tp->phys[phy_idx++] = phy;
- pr_info("%s: MII transceiver %d status 0x%4.4x advertising %4.4x.\n",
- dev->name, phy, mii_status, advertising);
+ netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
+ phy, mii_status, advertising);
}
}
if (phy_idx == 0) {
- pr_info("%s: No MII transceivers found! Assuming SYM transceiver.\n",
- dev->name);
+ netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
tp->phys[0] = 32;
}
} else
@@ -1062,15 +1060,15 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
tp->mii.full_duplex = full_duplex[board_idx];
if (tp->mii.full_duplex) {
- pr_info("%s: Media type forced to Full Duplex.\n", dev->name);
+ netdev_info(dev, "Media type forced to Full Duplex\n");
/* Changing the MII-advertised media because might prevent
re-connection. */
tp->mii.force_media = 1;
}
if (tp->default_port) {
- pr_info(" Forcing %dMbps %s-duplex operation.\n",
- (option & 0x20 ? 100 : 10),
- (option & 0x10 ? "full" : "half"));
+ netdev_info(dev, " Forcing %dMbps %s-duplex operation\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
mdio_write(dev, tp->phys[0], 0,
((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
@@ -1330,12 +1328,12 @@ static int rtl8139_open (struct net_device *dev)
rtl8139_hw_start (dev);
netif_start_queue (dev);
- if (netif_msg_ifup(tp))
- pr_debug("%s: rtl8139_open() ioaddr %#llx IRQ %d"
- " GP Pins %2.2x %s-duplex.\n", dev->name,
- (unsigned long long)pci_resource_start (tp->pci_dev, 1),
- dev->irq, RTL_R8 (MediaStatus),
- tp->mii.full_duplex ? "full" : "half");
+ netif_dbg(tp, ifup, dev,
+ "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
+ __func__,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
rtl8139_start_thread(tp);
@@ -1393,7 +1391,7 @@ static void rtl8139_hw_start (struct net_device *dev)
RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
}
- pr_debug("init buffer addresses\n");
+ netdev_dbg(dev, "init buffer addresses\n");
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1555,14 +1553,11 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
tp->mii.full_duplex = duplex;
if (mii_lpa) {
- pr_info("%s: Setting %s-duplex based on MII #%d link"
- " partner ability of %4.4x.\n",
- dev->name,
- tp->mii.full_duplex ? "full" : "half",
- tp->phys[0], mii_lpa);
+ netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
} else {
- pr_info("%s: media is unconnected, link down, or incompatible connection\n",
- dev->name);
+ netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
}
#if 0
RTL_W8 (Cfg9346, Cfg9346_Unlock);
@@ -1576,13 +1571,12 @@ static inline void rtl8139_thread_iter (struct net_device *dev,
rtl8139_tune_twister (dev, tp);
- pr_debug("%s: Media selection tick, Link partner %4.4x.\n",
- dev->name, RTL_R16 (NWayLPAR));
- pr_debug("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
- dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
- pr_debug("%s: Chip config %2.2x %2.2x.\n",
- dev->name, RTL_R8 (Config0),
- RTL_R8 (Config1));
+ netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
+ RTL_R16(NWayLPAR));
+ netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
+ RTL_R16(IntrMask), RTL_R16(IntrStatus));
+ netdev_dbg(dev, "Chip config %02x %02x\n",
+ RTL_R8(Config0), RTL_R8(Config1));
}
static void rtl8139_thread (struct work_struct *work)
@@ -1640,17 +1634,17 @@ static void rtl8139_tx_timeout_task (struct work_struct *work)
int i;
u8 tmp8;
- pr_debug("%s: Transmit timeout, status %2.2x %4.4x %4.4x media %2.2x.\n",
- dev->name, RTL_R8 (ChipCmd),
- RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
+ RTL_R8(ChipCmd), RTL_R16(IntrStatus),
+ RTL_R16(IntrMask), RTL_R8(MediaStatus));
/* Emit info to figure out what went wrong. */
- pr_debug("%s: Tx queue start entry %ld dirty entry %ld.\n",
- dev->name, tp->cur_tx, tp->dirty_tx);
+ netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n",
+ tp->cur_tx, tp->dirty_tx);
for (i = 0; i < NUM_TX_DESC; i++)
- pr_debug("%s: Tx descriptor %d is %8.8lx.%s\n",
- dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
- i == tp->dirty_tx % NUM_TX_DESC ?
- " (queue head)" : "");
+ netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
+ i, RTL_R32(TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
tp->xstats.tx_timeouts++;
@@ -1729,9 +1723,8 @@ static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
netif_stop_queue (dev);
spin_unlock_irqrestore(&tp->lock, flags);
- if (netif_msg_tx_queued(tp))
- pr_debug("%s: Queued Tx packet size %u to slot %d.\n",
- dev->name, len, entry);
+ netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
+ len, entry);
return NETDEV_TX_OK;
}
@@ -1760,9 +1753,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
/* Note: TxCarrierLost is always asserted at 100mbps. */
if (txstatus & (TxOutOfWindow | TxAborted)) {
/* There was an major error, log it. */
- if (netif_msg_tx_err(tp))
- pr_debug("%s: Transmit error, Tx status %8.8x.\n",
- dev->name, txstatus);
+ netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
+ txstatus);
dev->stats.tx_errors++;
if (txstatus & TxAborted) {
dev->stats.tx_aborted_errors++;
@@ -1792,8 +1784,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
#ifndef RTL8139_NDEBUG
if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
- pr_err("%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
- dev->name, dirty_tx, tp->cur_tx);
+ netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
+ dirty_tx, tp->cur_tx);
dirty_tx += NUM_TX_DESC;
}
#endif /* RTL8139_NDEBUG */
@@ -1816,14 +1808,13 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
int tmp_work;
#endif
- if (netif_msg_rx_err (tp))
- pr_debug("%s: Ethernet frame had errors, status %8.8x.\n",
- dev->name, rx_status);
+ netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
+ rx_status);
dev->stats.rx_errors++;
if (!(rx_status & RxStatusOK)) {
if (rx_status & RxTooLong) {
- pr_debug("%s: Oversized Ethernet frame, status %4.4x!\n",
- dev->name, rx_status);
+ netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
+ rx_status);
/* A.C.: The chip hangs here. */
}
if (rx_status & (RxBadSymbol | RxBadAlign))
@@ -1855,7 +1846,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
break;
}
if (tmp_work <= 0)
- pr_warning(PFX "rx stop wait too long\n");
+ netdev_warn(dev, "rx stop wait too long\n");
/* restart receive */
tmp_work = 200;
while (--tmp_work > 0) {
@@ -1866,7 +1857,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
break;
}
if (tmp_work <= 0)
- pr_warning(PFX "tx/rx enable wait too long\n");
+ netdev_warn(dev, "tx/rx enable wait too long\n");
/* and reinitialize all rx related registers */
RTL_W8_F (Cfg9346, Cfg9346_Unlock);
@@ -1877,7 +1868,7 @@ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
RTL_W32 (RxConfig, tp->rx_config);
tp->cur_rx = 0;
- pr_debug("init buffer addresses\n");
+ netdev_dbg(dev, "init buffer addresses\n");
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1931,10 +1922,9 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
unsigned int cur_rx = tp->cur_rx;
unsigned int rx_size = 0;
- pr_debug("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
- " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
- RTL_R16 (RxBufAddr),
- RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+ netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ __func__, (u16)cur_rx,
+ RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
while (netif_running(dev) && received < budget &&
(RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
@@ -1950,19 +1940,12 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
rx_size = rx_status >> 16;
pkt_size = rx_size - 4;
- if (netif_msg_rx_status(tp))
- pr_debug("%s: rtl8139_rx() status %4.4x, size %4.4x,"
- " cur %4.4x.\n", dev->name, rx_status,
- rx_size, cur_rx);
+ netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
+ __func__, rx_status, rx_size, cur_rx);
#if RTL8139_DEBUG > 2
- {
- int i;
- pr_debug("%s: Frame contents ", dev->name);
- for (i = 0; i < 70; i++)
- pr_cont(" %2.2x",
- rx_ring[ring_offset + i]);
- pr_cont(".\n");
- }
+ print_dump_hex(KERN_DEBUG, "Frame contents: ",
+ DUMP_PREFIX_OFFSET, 16, 1,
+ &rx_ring[ring_offset], 70, true);
#endif
/* Packet copy from FIFO still in progress.
@@ -1973,14 +1956,11 @@ static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
if (!tp->fifo_copy_timeout)
tp->fifo_copy_timeout = jiffies + 2;
else if (time_after(jiffies, tp->fifo_copy_timeout)) {
- pr_debug("%s: hung FIFO. Reset.", dev->name);
+ netdev_dbg(dev, "hung FIFO. Reset\n");
rx_size = 0;
goto no_early_rx;
}
- if (netif_msg_intr(tp)) {
- pr_debug("%s: fifo copy in progress.",
- dev->name);
- }
+ netif_dbg(tp, intr, dev, "fifo copy in progress\n");
tp->xstats.early_rx++;
break;
}
@@ -2021,8 +2001,7 @@ no_early_rx:
netif_receive_skb (skb);
} else {
if (net_ratelimit())
- pr_warning("%s: Memory squeeze, dropping packet.\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
}
received++;
@@ -2036,10 +2015,9 @@ no_early_rx:
if (unlikely(!received || rx_size == 0xfff0))
rtl8139_isr_ack(tp);
- pr_debug("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
- " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
- RTL_R16 (RxBufAddr),
- RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+ netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ __func__, cur_rx,
+ RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
tp->cur_rx = cur_rx;
@@ -2060,8 +2038,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
void __iomem *ioaddr,
int status, int link_changed)
{
- pr_debug("%s: Abnormal interrupt, status %8.8x.\n",
- dev->name, status);
+ netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
assert (dev != NULL);
assert (tp != NULL);
@@ -2089,8 +2066,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev,
pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
- pr_err("%s: PCI Bus error %4.4x.\n",
- dev->name, pci_cmd_status);
+ netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
}
}
@@ -2183,8 +2159,8 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
out:
spin_unlock (&tp->lock);
- pr_debug("%s: exiting interrupt, intr_status=%#4.4x.\n",
- dev->name, RTL_R16 (IntrStatus));
+ netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
+ RTL_R16(IntrStatus));
return IRQ_RETVAL(handled);
}
@@ -2233,9 +2209,8 @@ static int rtl8139_close (struct net_device *dev)
netif_stop_queue(dev);
napi_disable(&tp->napi);
- if (netif_msg_ifdown(tp))
- pr_debug("%s: Shutting down ethercard, status was 0x%4.4x.\n",
- dev->name, RTL_R16 (IntrStatus));
+ netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
+ RTL_R16(IntrStatus));
spin_lock_irqsave (&tp->lock, flags);
@@ -2512,8 +2487,8 @@ static void __set_rx_mode (struct net_device *dev)
int rx_mode;
u32 tmp;
- pr_debug("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
- dev->name, dev->flags, RTL_R32 (RxConfig));
+ netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08lx\n",
+ dev->flags, RTL_R32(RxConfig));
/* Note: do not reorder, GCC is clever about common statements. */
if (dev->flags & IFF_PROMISC) {
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Remove #define ERR_PFX
Use pr_<level>
Use netdev_<level>
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/typhoon.c | 162 ++++++++++++++++++++++---------------------------
1 files changed, 73 insertions(+), 89 deletions(-)
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index edabc49..843f986 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -45,6 +45,8 @@
http://oss.sgi.com/cgi-bin/mesg.cgi?a=netdev&i=20031215152211.7003fe8e.rddunlap%40osdl.org
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
* Setting to > 1518 effectively disables this feature.
*/
@@ -102,8 +104,6 @@ static const int multicast_filter_limit = 32;
#define DRV_MODULE_NAME "typhoon"
#define DRV_MODULE_VERSION "1.5.9"
#define DRV_MODULE_RELDATE "Mar 2, 2009"
-#define PFX DRV_MODULE_NAME ": "
-#define ERR_PFX KERN_ERR PFX
#define FIRMWARE_NAME "3com/typhoon.bin"
#include <linux/module.h>
@@ -534,8 +534,7 @@ typhoon_process_response(struct typhoon *tp, int resp_size,
} else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
typhoon_hello(tp);
} else {
- printk(KERN_ERR "%s: dumping unexpected response "
- "0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+ pr_err("%s: dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
tp->name, le16_to_cpu(resp->cmd),
resp->numDesc, resp->flags,
le16_to_cpu(resp->parm1),
@@ -606,9 +605,8 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
freeResp = typhoon_num_free_resp(tp);
if(freeCmd < num_cmd || freeResp < num_resp) {
- printk("%s: no descs for cmd, had (needed) %d (%d) cmd, "
- "%d (%d) resp\n", tp->name, freeCmd, num_cmd,
- freeResp, num_resp);
+ pr_err("%s: no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+ tp->name, freeCmd, num_cmd, freeResp, num_resp);
err = -ENOMEM;
goto out;
}
@@ -1021,7 +1019,7 @@ typhoon_get_stats(struct net_device *dev)
return saved;
if(typhoon_do_get_stats(tp) < 0) {
- printk(KERN_ERR "%s: error getting stats\n", dev->name);
+ netdev_err(dev, "error getting stats\n");
return saved;
}
@@ -1366,8 +1364,8 @@ typhoon_request_firmware(struct typhoon *tp)
err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev);
if (err) {
- printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
- tp->name, FIRMWARE_NAME);
+ pr_err("%s: Failed to load firmware \"%s\"\n",
+ tp->name, FIRMWARE_NAME);
return err;
}
@@ -1402,7 +1400,7 @@ typhoon_request_firmware(struct typhoon *tp)
return 0;
invalid_fw:
- printk(KERN_ERR "%s: Invalid firmware image\n", tp->name);
+ pr_err("%s: Invalid firmware image\n", tp->name);
release_firmware(typhoon_fw);
typhoon_fw = NULL;
return -EINVAL;
@@ -1439,7 +1437,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ENOMEM;
dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma);
if(!dpage) {
- printk(KERN_ERR "%s: no DMA mem for firmware\n", tp->name);
+ pr_err("%s: no DMA mem for firmware\n", tp->name);
goto err_out;
}
@@ -1452,7 +1450,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ETIMEDOUT;
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- printk(KERN_ERR "%s: card ready timeout\n", tp->name);
+ pr_err("%s: card ready timeout\n", tp->name);
goto err_out_irq;
}
@@ -1492,7 +1490,7 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- printk(KERN_ERR "%s: segment ready timeout\n",
+ pr_err("%s: segment ready timeout\n",
tp->name);
goto err_out_irq;
}
@@ -1526,14 +1524,14 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- printk(KERN_ERR "%s: final segment ready timeout\n", tp->name);
+ pr_err("%s: final segment ready timeout\n", tp->name);
goto err_out_irq;
}
iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- printk(KERN_ERR "%s: boot ready timeout, status 0x%0x\n",
+ pr_err("%s: boot ready timeout, status 0x%0x\n",
tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
goto err_out_irq;
}
@@ -1556,7 +1554,7 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
void __iomem *ioaddr = tp->ioaddr;
if(typhoon_wait_status(ioaddr, initial_status) < 0) {
- printk(KERN_ERR "%s: boot ready timeout\n", tp->name);
+ pr_err("%s: boot ready timeout\n", tp->name);
goto out_timeout;
}
@@ -1567,7 +1565,7 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
- printk(KERN_ERR "%s: boot finish timeout (status 0x%x)\n",
+ pr_err("%s: boot finish timeout (status 0x%x)\n",
tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
goto out_timeout;
}
@@ -1867,8 +1865,7 @@ typhoon_interrupt(int irq, void *dev_instance)
typhoon_post_pci_writes(ioaddr);
__napi_schedule(&tp->napi);
} else {
- printk(KERN_ERR "%s: Error, poll already scheduled\n",
- dev->name);
+ netdev_err(dev, "Error, poll already scheduled\n");
}
return IRQ_HANDLED;
}
@@ -1901,16 +1898,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
xp_cmd.parm1 = events;
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
- tp->name, err);
+ pr_err("%s: %s(): wake events cmd err %d\n",
+ tp->name, __func__, err);
return err;
}
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- printk(KERN_ERR "%s: typhoon_sleep(): sleep cmd err %d\n",
- tp->name, err);
+ pr_err("%s: %s(): sleep cmd err %d\n",
+ tp->name, __func__, err);
return err;
}
@@ -2070,8 +2067,7 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
}
if(i == TYPHOON_WAIT_TIMEOUT)
- printk(KERN_ERR
- "%s: halt timed out waiting for Tx to complete\n",
+ pr_err("%s: halt timed out waiting for Tx to complete\n",
tp->name);
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
@@ -2089,11 +2085,11 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
- printk(KERN_ERR "%s: timed out waiting for 3XP to halt\n",
+ pr_err("%s: timed out waiting for 3XP to halt\n",
tp->name);
if(typhoon_reset(ioaddr, wait_type) < 0) {
- printk(KERN_ERR "%s: unable to reset 3XP\n", tp->name);
+ pr_err("%s: unable to reset 3XP\n", tp->name);
return -ETIMEDOUT;
}
@@ -2112,8 +2108,7 @@ typhoon_tx_timeout(struct net_device *dev)
struct typhoon *tp = netdev_priv(dev);
if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
- printk(KERN_WARNING "%s: could not reset in tx timeout\n",
- dev->name);
+ netdev_warn(dev, "could not reset in tx timeout\n");
goto truely_dead;
}
@@ -2122,8 +2117,7 @@ typhoon_tx_timeout(struct net_device *dev)
typhoon_free_rx_rings(tp);
if(typhoon_start_runtime(tp) < 0) {
- printk(KERN_ERR "%s: could not start runtime in tx timeout\n",
- dev->name);
+ netdev_err(dev, "could not start runtime in tx timeout\n");
goto truely_dead;
}
@@ -2148,7 +2142,7 @@ typhoon_open(struct net_device *dev)
err = typhoon_wakeup(tp, WaitSleep);
if(err < 0) {
- printk(KERN_ERR "%s: unable to wakeup device\n", dev->name);
+ netdev_err(dev, "unable to wakeup device\n");
goto out_sleep;
}
@@ -2173,14 +2167,13 @@ out_irq:
out_sleep:
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- printk(KERN_ERR "%s: unable to reboot into sleep img\n",
- dev->name);
+ netdev_err(dev, "unable to reboot into sleep img\n");
typhoon_reset(tp->ioaddr, NoWait);
goto out;
}
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0)
- printk(KERN_ERR "%s: unable to go back to sleep\n", dev->name);
+ netdev_err(dev, "unable to go back to sleep\n");
out:
return err;
@@ -2195,7 +2188,7 @@ typhoon_close(struct net_device *dev)
napi_disable(&tp->napi);
if(typhoon_stop_runtime(tp, WaitSleep) < 0)
- printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
+ netdev_err(dev, "unable to stop runtime\n");
/* Make sure there is no irq handler running on a different CPU. */
free_irq(dev->irq, dev);
@@ -2204,10 +2197,10 @@ typhoon_close(struct net_device *dev)
typhoon_init_rings(tp);
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0)
- printk(KERN_ERR "%s: unable to boot sleep image\n", dev->name);
+ netdev_err(dev, "unable to boot sleep image\n");
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0)
- printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
+ netdev_err(dev, "unable to put card to sleep\n");
return 0;
}
@@ -2225,14 +2218,12 @@ typhoon_resume(struct pci_dev *pdev)
return 0;
if(typhoon_wakeup(tp, WaitNoSleep) < 0) {
- printk(KERN_ERR "%s: critical: could not wake up in resume\n",
- dev->name);
+ netdev_err(dev, "critical: could not wake up in resume\n");
goto reset;
}
if(typhoon_start_runtime(tp) < 0) {
- printk(KERN_ERR "%s: critical: could not start runtime in "
- "resume\n", dev->name);
+ netdev_err(dev, "critical: could not start runtime in resume\n");
goto reset;
}
@@ -2259,8 +2250,7 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
spin_lock_bh(&tp->state_lock);
if(tp->vlgrp && tp->wol_events & TYPHOON_WAKE_MAGIC_PKT) {
spin_unlock_bh(&tp->state_lock);
- printk(KERN_ERR "%s: cannot do WAKE_MAGIC with VLANS\n",
- dev->name);
+ netdev_err(dev, "cannot do WAKE_MAGIC with VLANS\n");
return -EBUSY;
}
spin_unlock_bh(&tp->state_lock);
@@ -2268,7 +2258,7 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
netif_device_detach(dev);
if(typhoon_stop_runtime(tp, WaitNoSleep) < 0) {
- printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
+ netdev_err(dev, "unable to stop runtime\n");
goto need_resume;
}
@@ -2276,7 +2266,7 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
typhoon_init_rings(tp);
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- printk(KERN_ERR "%s: unable to boot sleep image\n", dev->name);
+ netdev_err(dev, "unable to boot sleep image\n");
goto need_resume;
}
@@ -2284,21 +2274,19 @@ typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
xp_cmd.parm1 = cpu_to_le16(ntohs(*(__be16 *)&dev->dev_addr[0]));
xp_cmd.parm2 = cpu_to_le32(ntohl(*(__be32 *)&dev->dev_addr[2]));
if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
- printk(KERN_ERR "%s: unable to set mac address in suspend\n",
- dev->name);
+ netdev_err(dev, "unable to set mac address in suspend\n");
goto need_resume;
}
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
xp_cmd.parm1 = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
- printk(KERN_ERR "%s: unable to set rx filter in suspend\n",
- dev->name);
+ netdev_err(dev, "unable to set rx filter in suspend\n");
goto need_resume;
}
if(typhoon_sleep(tp, pci_choose_state(pdev, state), tp->wol_events) < 0) {
- printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
+ netdev_err(dev, "unable to put card to sleep\n");
goto need_resume;
}
@@ -2352,7 +2340,7 @@ out_unmap:
out:
if(!mode)
- printk(KERN_INFO PFX "falling back to port IO\n");
+ pr_info("falling back to port IO\n");
return mode;
}
@@ -2384,11 +2372,11 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
int err = 0;
if(!did_version++)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
dev = alloc_etherdev(sizeof(*tp));
if(dev == NULL) {
- printk(ERR_PFX "%s: unable to alloc new net device\n",
+ pr_err("%s: unable to alloc new net device\n",
pci_name(pdev));
err = -ENOMEM;
goto error_out;
@@ -2397,20 +2385,20 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_enable_device(pdev);
if(err < 0) {
- printk(ERR_PFX "%s: unable to enable device\n",
+ pr_err("%s: unable to enable device\n",
pci_name(pdev));
goto error_out_dev;
}
err = pci_set_mwi(pdev);
if(err < 0) {
- printk(ERR_PFX "%s: unable to set MWI\n", pci_name(pdev));
+ pr_err("%s: unable to set MWI\n", pci_name(pdev));
goto error_out_disable;
}
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if(err < 0) {
- printk(ERR_PFX "%s: No usable DMA configuration\n",
+ pr_err("%s: No usable DMA configuration\n",
pci_name(pdev));
goto error_out_mwi;
}
@@ -2418,27 +2406,25 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* sanity checks on IO and MMIO BARs
*/
if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
- printk(ERR_PFX
- "%s: region #1 not a PCI IO resource, aborting\n",
+ pr_err("%s: region #1 not a PCI IO resource, aborting\n",
pci_name(pdev));
err = -ENODEV;
goto error_out_mwi;
}
if(pci_resource_len(pdev, 0) < 128) {
- printk(ERR_PFX "%s: Invalid PCI IO region size, aborting\n",
+ pr_err("%s: Invalid PCI IO region size, aborting\n",
pci_name(pdev));
err = -ENODEV;
goto error_out_mwi;
}
if(!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
- printk(ERR_PFX
- "%s: region #1 not a PCI MMIO resource, aborting\n",
+ pr_err("%s: region #1 not a PCI MMIO resource, aborting\n",
pci_name(pdev));
err = -ENODEV;
goto error_out_mwi;
}
if(pci_resource_len(pdev, 1) < 128) {
- printk(ERR_PFX "%s: Invalid PCI MMIO region size, aborting\n",
+ pr_err("%s: Invalid PCI MMIO region size, aborting\n",
pci_name(pdev));
err = -ENODEV;
goto error_out_mwi;
@@ -2446,7 +2432,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_request_regions(pdev, "typhoon");
if(err < 0) {
- printk(ERR_PFX "%s: could not request regions\n",
+ pr_err("%s: could not request regions\n",
pci_name(pdev));
goto error_out_mwi;
}
@@ -2458,7 +2444,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ioaddr = pci_iomap(pdev, use_mmio, 128);
if (!ioaddr) {
- printk(ERR_PFX "%s: cannot remap registers, aborting\n",
+ pr_err("%s: cannot remap registers, aborting\n",
pci_name(pdev));
err = -EIO;
goto error_out_regions;
@@ -2469,7 +2455,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared),
&shared_dma);
if(!shared) {
- printk(ERR_PFX "%s: could not allocate DMA memory\n",
+ pr_err("%s: could not allocate DMA memory\n",
pci_name(pdev));
err = -ENOMEM;
goto error_out_remap;
@@ -2493,7 +2479,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
* 5) Put the card to sleep.
*/
if (typhoon_reset(ioaddr, WaitSleep) < 0) {
- printk(ERR_PFX "%s: could not reset 3XP\n", pci_name(pdev));
+ pr_err("%s: could not reset 3XP\n", pci_name(pdev));
err = -EIO;
goto error_out_dma;
}
@@ -2515,7 +2501,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
typhoon_init_rings(tp);
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- printk(ERR_PFX "%s: cannot boot 3XP sleep image\n",
+ pr_err("%s: cannot boot 3XP sleep image\n",
pci_name(pdev));
err = -EIO;
goto error_out_reset;
@@ -2523,7 +2509,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
- printk(ERR_PFX "%s: cannot read MAC address\n",
+ pr_err("%s: cannot read MAC address\n",
pci_name(pdev));
err = -EIO;
goto error_out_reset;
@@ -2533,8 +2519,8 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*(__be32 *)&dev->dev_addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2));
if(!is_valid_ether_addr(dev->dev_addr)) {
- printk(ERR_PFX "%s: Could not obtain valid ethernet address, "
- "aborting\n", pci_name(pdev));
+ pr_err("%s: Could not obtain valid ethernet address, aborting\n",
+ pci_name(pdev));
goto error_out_reset;
}
@@ -2543,7 +2529,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
- printk(ERR_PFX "%s: Could not get Sleep Image version\n",
+ pr_err("%s: Could not get Sleep Image version\n",
pci_name(pdev));
goto error_out_reset;
}
@@ -2561,7 +2547,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
- printk(ERR_PFX "%s: cannot put adapter to sleep\n",
+ pr_err("%s: cannot put adapter to sleep\n",
pci_name(pdev));
err = -EIO;
goto error_out_reset;
@@ -2589,11 +2575,11 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_drvdata(pdev, dev);
- printk(KERN_INFO "%s: %s at %s 0x%llx, %pM\n",
- dev->name, typhoon_card_info[card_id].name,
- use_mmio ? "MMIO" : "IO",
- (unsigned long long)pci_resource_start(pdev, use_mmio),
- dev->dev_addr);
+ netdev_info(dev, "%s at %s 0x%llx, %pM\n",
+ typhoon_card_info[card_id].name,
+ use_mmio ? "MMIO" : "IO",
+ (unsigned long long)pci_resource_start(pdev, use_mmio),
+ dev->dev_addr);
/* xp_resp still contains the response to the READ_VERSIONS command.
* For debugging, let the user know what version he has.
@@ -2603,23 +2589,21 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
* of version is Month/Day of build.
*/
u16 monthday = le32_to_cpu(xp_resp[0].parm2) & 0xffff;
- printk(KERN_INFO "%s: Typhoon 1.0 Sleep Image built "
- "%02u/%02u/2000\n", dev->name, monthday >> 8,
- monthday & 0xff);
+ netdev_info(dev, "Typhoon 1.0 Sleep Image built %02u/%02u/2000\n",
+ monthday >> 8, monthday & 0xff);
} else if(xp_resp[0].numDesc == 2) {
/* This is the Typhoon 1.1+ type Sleep Image
*/
u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
u8 *ver_string = (u8 *) &xp_resp[1];
ver_string[25] = 0;
- printk(KERN_INFO "%s: Typhoon 1.1+ Sleep Image version "
- "%02x.%03x.%03x %s\n", dev->name, sleep_ver >> 24,
- (sleep_ver >> 12) & 0xfff, sleep_ver & 0xfff,
- ver_string);
+ netdev_info(dev, "Typhoon 1.1+ Sleep Image version %02x.%03x.%03x %s\n",
+ sleep_ver >> 24,
+ (sleep_ver >> 12) & 0xfff, sleep_ver & 0xfff,
+ ver_string);
} else {
- printk(KERN_WARNING "%s: Unknown Sleep Image version "
- "(%u:%04x)\n", dev->name, xp_resp[0].numDesc,
- le32_to_cpu(xp_resp[0].parm2));
+ netdev_warn(dev, "Unknown Sleep Image version (%u:%04x)\n",
+ xp_resp[0].numDesc, le32_to_cpu(xp_resp[0].parm2));
}
return 0;
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/8139cp.c | 72 +++++++++++++++++++++-----------------------------
1 files changed, 30 insertions(+), 42 deletions(-)
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 60bc0b0..3d4406b 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -46,6 +46,8 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "8139cp"
#define DRV_VERSION "1.3"
#define DRV_RELDATE "Mar 22, 2004"
@@ -104,8 +106,6 @@ static int multicast_filter_limit = 32;
module_param(multicast_filter_limit, int, 0);
MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
-#define PFX DRV_NAME ": "
-
#define CP_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK)
@@ -470,9 +470,8 @@ static inline void cp_rx_skb (struct cp_private *cp, struct sk_buff *skb,
static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
u32 status, u32 len)
{
- if (netif_msg_rx_err (cp))
- pr_debug("%s: rx err, slot %d status 0x%x len %d\n",
- cp->dev->name, rx_tail, status, len);
+ netif_dbg(cp, rx_err, cp->dev, "rx err, slot %d status 0x%x len %d\n",
+ rx_tail, status, len);
cp->dev->stats.rx_errors++;
if (status & RxErrFrame)
cp->dev->stats.rx_frame_errors++;
@@ -545,9 +544,8 @@ rx_status_loop:
goto rx_next;
}
- if (netif_msg_rx_status(cp))
- pr_debug("%s: rx slot %d status 0x%x len %d\n",
- dev->name, rx_tail, status, len);
+ netif_dbg(cp, rx_status, dev, "rx slot %d status 0x%x len %d\n",
+ rx_tail, status, len);
new_skb = netdev_alloc_skb_ip_align(dev, buflen);
if (!new_skb) {
@@ -621,9 +619,8 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
if (!status || (status == 0xFFFF))
return IRQ_NONE;
- if (netif_msg_intr(cp))
- pr_debug("%s: intr, status %04x cmd %02x cpcmd %04x\n",
- dev->name, status, cpr8(Cmd), cpr16(CpCmd));
+ netif_dbg(cp, intr, dev, "intr, status %04x cmd %02x cpcmd %04x\n",
+ status, cpr8(Cmd), cpr16(CpCmd));
cpw16(IntrStatus, status & ~cp_rx_intr_mask);
@@ -654,8 +651,8 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
pci_read_config_word(cp->pdev, PCI_STATUS, &pci_status);
pci_write_config_word(cp->pdev, PCI_STATUS, pci_status);
- pr_err("%s: PCI bus error, status=%04x, PCI status=%04x\n",
- dev->name, status, pci_status);
+ netdev_err(dev, "PCI bus error, status=%04x, PCI status=%04x\n",
+ status, pci_status);
/* TODO: reset hardware */
}
@@ -700,9 +697,8 @@ static void cp_tx (struct cp_private *cp)
if (status & LastFrag) {
if (status & (TxError | TxFIFOUnder)) {
- if (netif_msg_tx_err(cp))
- pr_debug("%s: tx err, status 0x%x\n",
- cp->dev->name, status);
+ netif_dbg(cp, tx_err, cp->dev,
+ "tx err, status 0x%x\n", status);
cp->dev->stats.tx_errors++;
if (status & TxOWC)
cp->dev->stats.tx_window_errors++;
@@ -717,8 +713,8 @@ static void cp_tx (struct cp_private *cp)
((status >> TxColCntShift) & TxColCntMask);
cp->dev->stats.tx_packets++;
cp->dev->stats.tx_bytes += skb->len;
- if (netif_msg_tx_done(cp))
- pr_debug("%s: tx done, slot %d\n", cp->dev->name, tx_tail);
+ netif_dbg(cp, tx_done, cp->dev,
+ "tx done, slot %d\n", tx_tail);
}
dev_kfree_skb_irq(skb);
}
@@ -752,8 +748,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&cp->lock, intr_flags);
- pr_err(PFX "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
@@ -878,9 +873,8 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
wmb();
}
cp->tx_head = entry;
- if (netif_msg_tx_queued(cp))
- pr_debug("%s: tx queued, slot %d, skblen %d\n",
- dev->name, entry, skb->len);
+ netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n",
+ entry, skb->len);
if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
@@ -992,7 +986,7 @@ static void cp_reset_hw (struct cp_private *cp)
schedule_timeout_uninterruptible(10);
}
- pr_err("%s: hardware reset timeout\n", cp->dev->name);
+ netdev_err(cp->dev, "hardware reset timeout\n");
}
static inline void cp_start_hw (struct cp_private *cp)
@@ -1159,8 +1153,7 @@ static int cp_open (struct net_device *dev)
struct cp_private *cp = netdev_priv(dev);
int rc;
- if (netif_msg_ifup(cp))
- pr_debug("%s: enabling interface\n", dev->name);
+ netif_dbg(cp, ifup, dev, "enabling interface\n");
rc = cp_alloc_rings(cp);
if (rc)
@@ -1194,8 +1187,7 @@ static int cp_close (struct net_device *dev)
napi_disable(&cp->napi);
- if (netif_msg_ifdown(cp))
- pr_debug("%s: disabling interface\n", dev->name);
+ netif_dbg(cp, ifdown, dev, "disabling interface\n");
spin_lock_irqsave(&cp->lock, flags);
@@ -1218,9 +1210,9 @@ static void cp_tx_timeout(struct net_device *dev)
unsigned long flags;
int rc;
- pr_warning("%s: Transmit timeout, status %2x %4x %4x %4x\n",
- dev->name, cpr8(Cmd), cpr16(CpCmd),
- cpr16(IntrStatus), cpr16(IntrMask));
+ netdev_warn(dev, "Transmit timeout, status %2x %4x %4x %4x\n",
+ cpr8(Cmd), cpr16(CpCmd),
+ cpr16(IntrStatus), cpr16(IntrMask));
spin_lock_irqsave(&cp->lock, flags);
@@ -1873,8 +1865,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
dev_info(&pdev->dev,
- "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip, use 8139too\n",
- pdev->vendor, pdev->device, pdev->revision);
+ "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip, use 8139too\n",
+ pdev->vendor, pdev->device, pdev->revision);
return -ENODEV;
}
@@ -1932,14 +1924,13 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
- "No usable DMA configuration, aborting.\n");
+ "No usable DMA configuration, aborting\n");
goto err_out_res;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
- "No usable consistent DMA configuration, "
- "aborting.\n");
+ "No usable consistent DMA configuration, aborting\n");
goto err_out_res;
}
}
@@ -1951,7 +1942,7 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (!regs) {
rc = -EIO;
dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
- (unsigned long long)pci_resource_len(pdev, 1),
+ (unsigned long long)pci_resource_len(pdev, 1),
(unsigned long long)pciaddr);
goto err_out_res;
}
@@ -1989,11 +1980,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
goto err_out_iomap;
- pr_info("%s: RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
- dev->name,
- dev->base_addr,
- dev->dev_addr,
- dev->irq);
+ netdev_info(dev, "RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
+ dev->base_addr, dev->dev_addr, dev->irq);
pci_set_drvdata(pdev, dev);
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/sky2.c | 63 ++++++++++++++++++++++-----------------------------
1 files changed, 27 insertions(+), 36 deletions(-)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a1198f1..d1e98e2 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -22,6 +22,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/crc32.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -51,7 +53,6 @@
#define DRV_NAME "sky2"
#define DRV_VERSION "1.27"
-#define PFX DRV_NAME " "
/*
* The Yukon II chipset takes 64 bit command blocks (called list elements)
@@ -1212,8 +1213,7 @@ static void sky2_rx_stop(struct sky2_port *sky2)
== sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
goto stopped;
- printk(KERN_WARNING PFX "%s: receiver stop failed\n",
- sky2->netdev->name);
+ netdev_warn(sky2->netdev, "receiver stop failed\n");
stopped:
sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
@@ -1555,7 +1555,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
if (ramsize > 0) {
u32 rxspace;
- pr_debug(PFX "%s: ram buffer %dK\n", sky2->netdev->name, ramsize);
+ netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
else
@@ -2070,13 +2070,12 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
if (lpa & PHY_M_AN_RF) {
- printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
+ netdev_err(sky2->netdev, "remote fault\n");
return -1;
}
if (!(aux & PHY_M_PS_SPDUP_RES)) {
- printk(KERN_ERR PFX "%s: speed/duplex mismatch",
- sky2->netdev->name);
+ netdev_err(sky2->netdev, "speed/duplex mismatch\n");
return -1;
}
@@ -2195,10 +2194,10 @@ static void sky2_tx_timeout(struct net_device *dev)
netif_err(sky2, timer, dev, "tx timeout\n");
- printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
- dev->name, sky2->tx_cons, sky2->tx_prod,
- sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
- sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
+ netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
+ sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
/* can't restart safely under softirq */
schedule_work(&hw->restart_work);
@@ -2614,8 +2613,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
default:
if (net_ratelimit())
- printk(KERN_WARNING PFX
- "unknown status opcode 0x%x\n", opcode);
+ pr_warning("unknown status opcode 0x%x\n", opcode);
}
} while (hw->st_idx != idx);
@@ -2634,41 +2632,37 @@ static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
struct net_device *dev = hw->dev[port];
if (net_ratelimit())
- printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
- dev->name, status);
+ netdev_info(dev, "hw error interrupt status 0x%x\n", status);
if (status & Y2_IS_PAR_RD1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: ram data read parity error\n",
- dev->name);
+ netdev_err(dev, "ram data read parity error\n");
/* Clear IRQ */
sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
}
if (status & Y2_IS_PAR_WR1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: ram data write parity error\n",
- dev->name);
+ netdev_err(dev, "ram data write parity error\n");
sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
}
if (status & Y2_IS_PAR_MAC1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
+ netdev_err(dev, "MAC parity error\n");
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
}
if (status & Y2_IS_PAR_RX1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
+ netdev_err(dev, "RX parity error\n");
sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
}
if (status & Y2_IS_TCP_TXA1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: TCP segmentation error\n",
- dev->name);
+ netdev_err(dev, "TCP segmentation error\n");
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
}
}
@@ -2751,8 +2745,7 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
struct net_device *dev = hw->dev[port];
u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));
- dev_err(&hw->pdev->dev, PFX
- "%s: descriptor error q=%#x get=%u put=%u\n",
+ dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
dev->name, (unsigned) q, (unsigned) idx,
(unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));
@@ -2777,9 +2770,10 @@ static int sky2_rx_hung(struct net_device *dev)
/* Check if the PCI RX hang */
(fifo_rp == sky2->check.fifo_rp &&
fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
- printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
- dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
- sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
+ netdev_printk(KERN_DEBUG, dev,
+ "hung mac %d:%d fifo %d (%d:%d)\n",
+ mac_lev, mac_rp, fifo_lev,
+ fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
return 1;
} else {
sky2->check.last = dev->last_rx;
@@ -2810,8 +2804,7 @@ static void sky2_watchdog(unsigned long arg)
/* For chips with Rx FIFO, check if stuck */
if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
sky2_rx_hung(dev)) {
- pr_info(PFX "%s: receiver hang detected\n",
- dev->name);
+ netdev_info(dev, "receiver hang detected\n");
schedule_work(&hw->restart_work);
return;
}
@@ -3253,8 +3246,7 @@ static int sky2_reattach(struct net_device *dev)
if (netif_running(dev)) {
err = sky2_up(dev);
if (err) {
- printk(KERN_INFO PFX "%s: could not restart %d\n",
- dev->name, err);
+ netdev_info(dev, "could not restart %d\n", err);
dev_close(dev);
} else {
netif_device_attach(dev);
@@ -4032,7 +4024,7 @@ static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
/* Can take up to 10.6 ms for write */
if (time_after(jiffies, start + HZ/4)) {
- dev_err(&hw->pdev->dev, PFX "VPD cycle timed out");
+ dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
return -ETIMEDOUT;
}
mdelay(1);
@@ -4366,8 +4358,7 @@ static int sky2_device_event(struct notifier_block *unused,
case NETDEV_GOING_DOWN:
if (sky2->debugfs) {
- printk(KERN_DEBUG PFX "%s: remove debugfs\n",
- dev->name);
+ netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
debugfs_remove(sky2->debugfs);
sky2->debugfs = NULL;
}
@@ -4931,7 +4922,7 @@ static struct pci_driver sky2_driver = {
static int __init sky2_init_module(void)
{
- pr_info(PFX "driver version " DRV_VERSION "\n");
+ pr_info("driver version " DRV_VERSION "\n");
sky2_debug_init();
return pci_register_driver(&sky2_driver);
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Remove periods from most formats
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/tg3.c | 261 +++++++++++++++++++++--------------------------------
1 files changed, 104 insertions(+), 157 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 385434f..1bb764c 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1099,8 +1099,7 @@ static int tg3_mdio_init(struct tg3 *tp)
i = mdiobus_register(tp->mdio_bus);
if (i) {
- printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
- tp->dev->name, i);
+ netdev_warn(tp->dev, "mdiobus_reg failed (0x%x)\n", i);
mdiobus_free(tp->mdio_bus);
return i;
}
@@ -1108,7 +1107,7 @@ static int tg3_mdio_init(struct tg3 *tp)
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
if (!phydev || !phydev->drv) {
- printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
+ netdev_warn(tp->dev, "No PHY devices\n");
mdiobus_unregister(tp->mdio_bus);
mdiobus_free(tp->mdio_bus);
return -ENODEV;
@@ -1252,27 +1251,22 @@ static void tg3_ump_link_report(struct tg3 *tp)
static void tg3_link_report(struct tg3 *tp)
{
if (!netif_carrier_ok(tp->dev)) {
- if (netif_msg_link(tp))
- printk(KERN_INFO PFX "%s: Link is down.\n",
- tp->dev->name);
+ netif_info(tp, link, tp->dev, "Link is down\n");
tg3_ump_link_report(tp);
} else if (netif_msg_link(tp)) {
- printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
- tp->dev->name,
- (tp->link_config.active_speed == SPEED_1000 ?
- 1000 :
- (tp->link_config.active_speed == SPEED_100 ?
- 100 : 10)),
- (tp->link_config.active_duplex == DUPLEX_FULL ?
- "full" : "half"));
-
- printk(KERN_INFO PFX
- "%s: Flow control is %s for TX and %s for RX.\n",
- tp->dev->name,
- (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
- "on" : "off",
- (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
- "on" : "off");
+ netdev_info(tp->dev, "Link is up at %d Mbps, %s duplex\n",
+ (tp->link_config.active_speed == SPEED_1000 ?
+ 1000 :
+ (tp->link_config.active_speed == SPEED_100 ?
+ 100 : 10)),
+ (tp->link_config.active_duplex == DUPLEX_FULL ?
+ "full" : "half"));
+
+ netdev_info(tp->dev, "Flow control is %s for TX and %s for RX\n",
+ (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
+ "on" : "off",
+ (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
+ "on" : "off");
tg3_ump_link_report(tp);
}
}
@@ -1471,7 +1465,7 @@ static int tg3_phy_init(struct tg3 *tp)
phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
phydev->dev_flags, phydev->interface);
if (IS_ERR(phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
+ netdev_err(tp->dev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
}
@@ -2500,8 +2494,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
break;
default:
- printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
- tp->dev->name, state);
+ netdev_err(tp->dev, "Invalid power state (D%d) requested\n",
+ state);
return -EINVAL;
}
@@ -4341,10 +4335,8 @@ static void tg3_tx_recover(struct tg3 *tp)
BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
tp->write32_tx_mbox == tg3_write_indirect_mbox);
- printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
- "mapped I/O cycles to the network device, attempting to "
- "recover. Please report the problem to the driver maintainer "
- "and include system chipset information.\n", tp->dev->name);
+ netdev_warn(tp->dev, "The system may be re-ordering memory-mapped I/O cycles to the network device, attempting to recover\n"
+ "Please report the problem to the driver maintainer and include system chipset information.\n");
spin_lock(&tp->lock);
tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
@@ -5263,8 +5255,7 @@ static int tg3_restart_hw(struct tg3 *tp, int reset_phy)
err = tg3_init_hw(tp, reset_phy);
if (err) {
- printk(KERN_ERR PFX "%s: Failed to re-initialize device, "
- "aborting.\n", tp->dev->name);
+ netdev_err(tp->dev, "Failed to re-initialize device, aborting\n");
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_full_unlock(tp);
del_timer_sync(&tp->timer);
@@ -5337,10 +5328,10 @@ out:
static void tg3_dump_short_state(struct tg3 *tp)
{
- printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
- tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
- printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
- tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
+ netdev_err(tp->dev, "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
+ tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
+ netdev_err(tp->dev, "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
+ tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
}
static void tg3_tx_timeout(struct net_device *dev)
@@ -5348,8 +5339,7 @@ static void tg3_tx_timeout(struct net_device *dev)
struct tg3 *tp = netdev_priv(dev);
if (netif_msg_tx_err(tp)) {
- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
+ netdev_err(dev, "transmit timed out, resetting\n");
tg3_dump_short_state(tp);
}
@@ -5513,8 +5503,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
}
return NETDEV_TX_BUSY;
}
@@ -5717,8 +5706,7 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
}
return NETDEV_TX_BUSY;
}
@@ -6065,11 +6053,8 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
/* Now allocate fresh SKBs for each rx ring. */
for (i = 0; i < tp->rx_pending; i++) {
if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_STD, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX standard ring, "
- "only %d out of %d buffers were allocated "
- "successfully.\n",
- tp->dev->name, i, tp->rx_pending);
+ netdev_warn(tp->dev, "Using a smaller RX standard ring, only %d out of %d buffers were allocated successfully\n",
+ i, tp->rx_pending);
if (i == 0)
goto initfail;
tp->rx_pending = i;
@@ -6097,11 +6082,8 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
for (i = 0; i < tp->rx_jumbo_pending; i++) {
if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO,
i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX jumbo ring, "
- "only %d out of %d buffers were "
- "allocated successfully.\n",
- tp->dev->name, i, tp->rx_jumbo_pending);
+ netdev_warn(tp->dev, "Using a smaller RX jumbo ring, only %d out of %d buffers were allocated successfully\n",
+ i, tp->rx_jumbo_pending);
if (i == 0)
goto initfail;
tp->rx_jumbo_pending = i;
@@ -6446,8 +6428,7 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
}
if (i == MAX_WAIT_CNT && !silent) {
- printk(KERN_ERR PFX "tg3_stop_block timed out, "
- "ofs=%lx enable_bit=%x\n",
+ pr_err("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
}
@@ -6494,9 +6475,8 @@ static int tg3_abort_hw(struct tg3 *tp, int silent)
break;
}
if (i >= MAX_WAIT_CNT) {
- printk(KERN_ERR PFX "tg3_abort_hw timed out for %s, "
- "TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
- tp->dev->name, tr32(MAC_TX_MODE));
+ netdev_err(tp->dev, "%s timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
+ __func__, tr32(MAC_TX_MODE));
err |= -ENODEV;
}
@@ -6717,8 +6697,7 @@ static int tg3_poll_fw(struct tg3 *tp)
!(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
- printk(KERN_INFO PFX "%s: No firmware running.\n",
- tp->dev->name);
+ netdev_info(tp->dev, "No firmware running\n");
}
if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
@@ -7146,10 +7125,8 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
}
if (i >= 10000) {
- printk(KERN_ERR PFX "tg3_reset_cpu timed out for %s, "
- "and %s CPU\n",
- tp->dev->name,
- (offset == RX_CPU_BASE ? "RX" : "TX"));
+ netdev_err(tp->dev, "%s timed out, %s CPU\n",
+ __func__, offset == RX_CPU_BASE ? "RX" : "TX");
return -ENODEV;
}
@@ -7174,9 +7151,8 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
if (cpu_base == TX_CPU_BASE &&
(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- printk(KERN_ERR PFX "tg3_load_firmware_cpu: Trying to load "
- "TX cpu firmware on %s which is 5705.\n",
- tp->dev->name);
+ netdev_err(tp->dev, "%s: Trying to load TX cpu firmware which is 5705\n",
+ __func__);
return -EINVAL;
}
@@ -7255,10 +7231,8 @@ static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
- "to set RX CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
- info.fw_base);
+ netdev_err(tp->dev, "tg3_load_firmware fails to set RX CPU PC, is %08x should be %08x\n",
+ tr32(RX_CPU_BASE + CPU_PC), info.fw_base);
return -ENODEV;
}
tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
@@ -7321,10 +7295,8 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
- "to set CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(cpu_base + CPU_PC),
- info.fw_base);
+ netdev_err(tp->dev, "%s fails to set CPU PC, is %08x should be %08x\n",
+ __func__, tr32(cpu_base + CPU_PC), info.fw_base);
return -ENODEV;
}
tw32(cpu_base + CPU_STATE, 0xffffffff);
@@ -7785,8 +7757,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
udelay(10);
}
if (i >= 2000) {
- printk(KERN_ERR PFX "tg3_reset_hw cannot enable BUFMGR for %s.\n",
- tp->dev->name);
+ netdev_err(tp->dev, "%s cannot enable BUFMGR\n", __func__);
return -ENODEV;
}
@@ -8649,10 +8620,8 @@ static int tg3_test_msi(struct tg3 *tp)
return err;
/* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- tp->dev->name);
+ netdev_warn(tp->dev, "No interrupt was generated using MSI, switching to INTx mode\n"
+ "Please report this failure to the PCI maintainer and include system chipset information\n");
free_irq(tp->napi[0].irq_vec, &tp->napi[0]);
@@ -8685,8 +8654,8 @@ static int tg3_request_firmware(struct tg3 *tp)
const __be32 *fw_data;
if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
- printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
- tp->dev->name, tp->fw_needed);
+ netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+ tp->fw_needed);
return -ENOENT;
}
@@ -8699,8 +8668,8 @@ static int tg3_request_firmware(struct tg3 *tp)
tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
if (tp->fw_len < (tp->fw->size - 12)) {
- printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
- tp->dev->name, tp->fw_len, tp->fw_needed);
+ netdev_err(tp->dev, "bogus length %d in \"%s\"\n",
+ tp->fw_len, tp->fw_needed);
release_firmware(tp->fw);
tp->fw = NULL;
return -EINVAL;
@@ -8738,9 +8707,8 @@ static bool tg3_enable_msix(struct tg3 *tp)
return false;
if (pci_enable_msix(tp->pdev, msix_ent, rc))
return false;
- printk(KERN_NOTICE
- "%s: Requested %d MSI-X vectors, received %d\n",
- tp->dev->name, tp->irq_cnt, rc);
+ netdev_notice(tp->dev, "Requested %d MSI-X vectors, received %d\n",
+ tp->irq_cnt, rc);
tp->irq_cnt = rc;
}
@@ -8765,8 +8733,7 @@ static void tg3_ints_init(struct tg3 *tp)
/* All MSI supporting chips should support tagged
* status. Assert that this is the case.
*/
- printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
- "Not using MSI.\n", tp->dev->name);
+ netdev_warn(tp->dev, "MSI without TAGGED? Not using MSI\n");
goto defcfg;
}
@@ -8811,12 +8778,10 @@ static int tg3_open(struct net_device *dev)
if (err)
return err;
} else if (err) {
- printk(KERN_WARNING "%s: TSO capability disabled.\n",
- tp->dev->name);
+ netdev_warn(tp->dev, "TSO capability disabled\n");
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
- printk(KERN_NOTICE "%s: TSO capability restored.\n",
- tp->dev->name);
+ netdev_notice(tp->dev, "TSO capability restored\n");
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
}
}
@@ -10671,8 +10636,7 @@ static int tg3_test_registers(struct tg3 *tp)
out:
if (netif_msg_hw(tp))
- printk(KERN_ERR PFX "Register test failed at offset %x\n",
- offset);
+ pr_err("Register test failed at offset %x\n", offset);
tw32(offset, save_val);
return -EIO;
}
@@ -11798,8 +11762,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
tp->tg3_flags |= TG3_FLAG_NVRAM;
if (tg3_nvram_lock(tp)) {
- printk(KERN_WARNING PFX "%s: Cannot get nvarm lock, "
- "tg3_nvram_init failed.\n", tp->dev->name);
+ netdev_warn(tp->dev, "Cannot get nvram lock, %s failed\n",
+ __func__);
return;
}
tg3_enable_nvram_access(tp);
@@ -13217,8 +13181,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
if (!tp->pcix_cap) {
- printk(KERN_ERR PFX "Cannot find PCI-X "
- "capability, aborting.\n");
+ pr_err("Cannot find PCI-X capability, aborting\n");
return -EIO;
}
@@ -13415,8 +13378,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
- printk(KERN_ERR PFX "(%s) transition to D0 failed\n",
- pci_name(tp->pdev));
+ pr_err("(%s) transition to D0 failed\n", pci_name(tp->pdev));
return err;
}
@@ -13588,7 +13550,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
err = tg3_phy_probe(tp);
if (err) {
- printk(KERN_ERR PFX "(%s) phy probe failed, err %d\n",
+ pr_err("(%s) phy probe failed, err %d\n",
pci_name(tp->pdev), err);
/* ... but do not return immediately ... */
tg3_mdio_fini(tp);
@@ -14098,7 +14060,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Send the buffer to the chip. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 1);
if (ret) {
- printk(KERN_ERR "tg3_test_dma() Write the buffer failed %d\n", ret);
+ pr_err("tg3_test_dma() Write the buffer failed %d\n", ret);
break;
}
@@ -14108,7 +14070,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
u32 val;
tg3_read_mem(tp, 0x2100 + (i*4), &val);
if (le32_to_cpu(val) != p[i]) {
- printk(KERN_ERR " tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n", val, i);
+ pr_err(" tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n", val, i);
/* ret = -ENODEV here? */
}
p[i] = 0;
@@ -14117,7 +14079,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Now read it back. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0);
if (ret) {
- printk(KERN_ERR "tg3_test_dma() Read the buffer failed %d\n", ret);
+ pr_err("tg3_test_dma() Read the buffer failed %d\n", ret);
break;
}
@@ -14134,7 +14096,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
break;
} else {
- printk(KERN_ERR "tg3_test_dma() buffer corrupted on read back! (%d != %d)\n", p[i], i);
+ pr_err("tg3_test_dma() buffer corrupted on read back! (%d != %d)\n", p[i], i);
ret = -ENODEV;
goto out;
}
@@ -14424,19 +14386,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
u64 dma_mask, persist_dma_mask;
if (tg3_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device, "
- "aborting.\n");
+ pr_err("Cannot enable PCI device, aborting\n");
return err;
}
err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources, "
- "aborting.\n");
+ pr_err("Cannot obtain PCI resources, aborting\n");
goto err_out_disable_pdev;
}
@@ -14445,15 +14405,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
- "aborting.\n");
+ pr_err("Cannot find PowerManagement capability, aborting\n");
err = -EIO;
goto err_out_free_res;
}
dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS);
if (!dev) {
- printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
+ pr_err("Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto err_out_free_res;
}
@@ -14503,8 +14462,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tp->regs = pci_ioremap_bar(pdev, BAR_0);
if (!tp->regs) {
- printk(KERN_ERR PFX "Cannot map device registers, "
- "aborting.\n");
+ netdev_err(dev, "Cannot map device registers, aborting\n");
err = -ENOMEM;
goto err_out_free_dev;
}
@@ -14520,8 +14478,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_get_invariants(tp);
if (err) {
- printk(KERN_ERR PFX "Problem fetching invariants of chip, "
- "aborting.\n");
+ netdev_err(dev, "Problem fetching invariants of chip, aborting\n");
goto err_out_iounmap;
}
@@ -14556,8 +14513,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = pci_set_consistent_dma_mask(pdev,
persist_dma_mask);
if (err < 0) {
- printk(KERN_ERR PFX "Unable to obtain 64 bit "
- "DMA for consistent allocations\n");
+ netdev_err(dev, "Unable to obtain 64 bit DMA for consistent allocations\n");
goto err_out_iounmap;
}
}
@@ -14565,8 +14521,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
if (err || dma_mask == DMA_BIT_MASK(32)) {
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
- "aborting.\n");
+ netdev_err(dev, "No usable DMA configuration, aborting\n");
goto err_out_iounmap;
}
}
@@ -14615,16 +14570,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_get_device_address(tp);
if (err) {
- printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
- "aborting.\n");
+ netdev_err(dev, "Could not obtain valid ethernet address, aborting\n");
goto err_out_iounmap;
}
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
if (!tp->aperegs) {
- printk(KERN_ERR PFX "Cannot map APE registers, "
- "aborting.\n");
+ netdev_err(dev, "Cannot map APE registers, aborting\n");
err = -ENOMEM;
goto err_out_iounmap;
}
@@ -14648,7 +14601,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_test_dma(tp);
if (err) {
- printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
+ netdev_err(dev, "DMA engine test failed, aborting\n");
goto err_out_apeunmap;
}
@@ -14709,45 +14662,39 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "Cannot register net device, "
- "aborting.\n");
+ netdev_err(dev, "Cannot register net device, aborting\n");
goto err_out_apeunmap;
}
- printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
- dev->name,
- tp->board_part_number,
- tp->pci_chip_rev_id,
- tg3_bus_string(tp, str),
- dev->dev_addr);
+ netdev_info(dev, "Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
+ tp->board_part_number,
+ tp->pci_chip_rev_id,
+ tg3_bus_string(tp, str),
+ dev->dev_addr);
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
struct phy_device *phydev;
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
- printk(KERN_INFO
- "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
- tp->dev->name, phydev->drv->name,
- dev_name(&phydev->dev));
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
} else
- printk(KERN_INFO
- "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
- tp->dev->name, tg3_phy_string(tp),
- ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
- ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
- "10/100/1000Base-T")),
- (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
-
- printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
- dev->name,
- (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
- (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
- (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
- dev->name, tp->dma_rwctrl,
- (pdev->dma_mask == DMA_BIT_MASK(32)) ? 32 :
- (((u64) pdev->dma_mask == DMA_BIT_MASK(40)) ? 40 : 64));
+ netdev_info(dev, "attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
+ tg3_phy_string(tp),
+ ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
+ ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
+ "10/100/1000Base-T")),
+ (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
+
+ netdev_info(dev, "RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
+ (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
+ (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
+ (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
+ (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
+ (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+ netdev_info(dev, "dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ tp->dma_rwctrl,
+ pdev->dma_mask == DMA_BIT_MASK(32) ? 32 :
+ ((u64)pdev->dma_mask) == DMA_BIT_MASK(40) ? 40 : 64);
return 0;
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Convert formats like %8.8 to %08
Remove periods from formats
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/yellowfin.c | 162 +++++++++++++++++++++++------------------------
1 files changed, 78 insertions(+), 84 deletions(-)
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 5c88024..e4aab4d 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -23,12 +23,12 @@
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "yellowfin"
#define DRV_VERSION "2.1"
#define DRV_RELDATE "Sep 11, 2006"
-#define PFX DRV_NAME ": "
-
/* The user-configurable values.
These may be modified when a driver module is loaded.*/
@@ -399,7 +399,7 @@ static int __devinit yellowfin_init_one(struct pci_dev *pdev,
dev = alloc_etherdev(sizeof(*np));
if (!dev) {
- printk (KERN_ERR PFX "cannot allocate ethernet device\n");
+ pr_err("cannot allocate ethernet device\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
@@ -487,10 +487,10 @@ static int __devinit yellowfin_init_one(struct pci_dev *pdev,
if (i)
goto err_out_unmap_status;
- printk(KERN_INFO "%s: %s type %8x at %p, %pM, IRQ %d.\n",
- dev->name, pci_id_tbl[chip_idx].name,
- ioread32(ioaddr + ChipRev), ioaddr,
- dev->dev_addr, irq);
+ netdev_info(dev, "%s type %8x at %p, %pM, IRQ %d\n",
+ pci_id_tbl[chip_idx].name,
+ ioread32(ioaddr + ChipRev), ioaddr,
+ dev->dev_addr, irq);
if (np->drv_flags & HasMII) {
int phy, phy_idx = 0;
@@ -499,9 +499,8 @@ static int __devinit yellowfin_init_one(struct pci_dev *pdev,
if (mii_status != 0xffff && mii_status != 0x0000) {
np->phys[phy_idx++] = phy;
np->advertising = mdio_read(ioaddr, phy, 4);
- printk(KERN_INFO "%s: MII PHY found at address %d, status "
- "0x%4.4x advertising %4.4x.\n",
- dev->name, phy, mii_status, np->advertising);
+ netdev_info(dev, "MII PHY found at address %d, status 0x%04x advertising %04x\n",
+ phy, mii_status, np->advertising);
}
}
np->mii_cnt = phy_idx;
@@ -584,8 +583,8 @@ static int yellowfin_open(struct net_device *dev)
return ret;
if (yellowfin_debug > 1)
- printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
- dev->name, dev->irq);
+ netdev_printk(KERN_DEBUG, dev, "%s() irq %d\n",
+ __func__, dev->irq);
ret = yellowfin_init_ring(dev);
if (ret) {
@@ -642,8 +641,7 @@ static int yellowfin_open(struct net_device *dev)
iowrite32(0x80008000, ioaddr + TxCtrl);
if (yellowfin_debug > 2) {
- printk(KERN_DEBUG "%s: Done yellowfin_open().\n",
- dev->name);
+ netdev_printk(KERN_DEBUG, dev, "Done %s()\n", __func__);
}
/* Set the timer to check for link beat. */
@@ -664,8 +662,8 @@ static void yellowfin_timer(unsigned long data)
int next_tick = 60*HZ;
if (yellowfin_debug > 3) {
- printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n",
- dev->name, ioread16(ioaddr + IntrStatus));
+ netdev_printk(KERN_DEBUG, dev, "Yellowfin timer tick, status %08x\n",
+ ioread16(ioaddr + IntrStatus));
}
if (yp->mii_cnt) {
@@ -673,9 +671,8 @@ static void yellowfin_timer(unsigned long data)
int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
int negotiated = lpa & yp->advertising;
if (yellowfin_debug > 1)
- printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
- "link partner capability %4.4x.\n",
- dev->name, yp->phys[0], bmsr, lpa);
+ netdev_printk(KERN_DEBUG, dev, "MII #%d status register is %04x, link partner capability %04x\n",
+ yp->phys[0], bmsr, lpa);
yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
@@ -696,25 +693,24 @@ static void yellowfin_tx_timeout(struct net_device *dev)
struct yellowfin_private *yp = netdev_priv(dev);
void __iomem *ioaddr = yp->base;
- printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx "
- "status %4.4x, Rx status %4.4x, resetting...\n",
- dev->name, yp->cur_tx, yp->dirty_tx,
- ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
+ netdev_warn(dev, "Yellowfin transmit timed out at %d/%d Tx status %04x, Rx status %04x, resetting...\n",
+ yp->cur_tx, yp->dirty_tx,
+ ioread32(ioaddr + TxStatus),
+ ioread32(ioaddr + RxStatus));
/* Note: these should be KERN_DEBUG. */
if (yellowfin_debug) {
int i;
- printk(KERN_WARNING " Rx ring %p: ", yp->rx_ring);
+ pr_warning(" Rx ring %p: ", yp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
- printk(KERN_CONT " %8.8x",
- yp->rx_ring[i].result_status);
- printk(KERN_CONT "\n");
- printk(KERN_WARNING" Tx ring %p: ", yp->tx_ring);
+ pr_cont(" %08x", yp->rx_ring[i].result_status);
+ pr_cont("\n");
+ pr_warning(" Tx ring %p: ", yp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(KERN_CONT " %4.4x /%8.8x",
+ pr_cont(" %04x /%08x",
yp->tx_status[i].tx_errs,
yp->tx_ring[i].result_status);
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
/* If the hardware is found to hang regularly, we will update the code
@@ -891,8 +887,8 @@ static netdev_tx_t yellowfin_start_xmit(struct sk_buff *skb,
yp->tx_full = 1;
if (yellowfin_debug > 4) {
- printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
- dev->name, yp->cur_tx, entry);
+ netdev_printk(KERN_DEBUG, dev, "Yellowfin transmit frame #%d queued in slot %d\n",
+ yp->cur_tx, entry);
}
return NETDEV_TX_OK;
}
@@ -916,8 +912,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
u16 intr_status = ioread16(ioaddr + IntrClear);
if (yellowfin_debug > 4)
- printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n",
- dev->name, intr_status);
+ netdev_printk(KERN_DEBUG, dev, "Yellowfin interrupt, status %04x\n",
+ intr_status);
if (intr_status == 0)
break;
@@ -963,13 +959,12 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
#ifndef final_version
if (yellowfin_debug > 5)
- printk(KERN_DEBUG "%s: Tx queue %d check, Tx status "
- "%4.4x %4.4x %4.4x %4.4x.\n",
- dev->name, entry,
- yp->tx_status[entry].tx_cnt,
- yp->tx_status[entry].tx_errs,
- yp->tx_status[entry].total_tx_cnt,
- yp->tx_status[entry].paused);
+ netdev_printk(KERN_DEBUG, dev, "Tx queue %d check, Tx status %04x %04x %04x %04x\n",
+ entry,
+ yp->tx_status[entry].tx_cnt,
+ yp->tx_status[entry].tx_errs,
+ yp->tx_status[entry].total_tx_cnt,
+ yp->tx_status[entry].paused);
#endif
if (tx_errs == 0)
break; /* It still hasn't been Txed */
@@ -978,8 +973,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
/* There was an major error, log it. */
#ifndef final_version
if (yellowfin_debug > 1)
- printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n",
- dev->name, tx_errs);
+ netdev_printk(KERN_DEBUG, dev, "Transmit error, Tx status %04x\n",
+ tx_errs);
#endif
dev->stats.tx_errors++;
if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
@@ -989,8 +984,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
} else {
#ifndef final_version
if (yellowfin_debug > 4)
- printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n",
- dev->name, tx_errs);
+ netdev_printk(KERN_DEBUG, dev, "Normal transmit, Tx status %04x\n",
+ tx_errs);
#endif
dev->stats.tx_bytes += skb->len;
dev->stats.collisions += tx_errs & 15;
@@ -1008,8 +1003,8 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
#ifndef final_version
if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
- printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
- dev->name, dirty_tx, yp->cur_tx, yp->tx_full);
+ netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d, full=%d\n",
+ dirty_tx, yp->cur_tx, yp->tx_full);
dirty_tx += TX_RING_SIZE;
}
#endif
@@ -1031,16 +1026,15 @@ static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
yellowfin_error(dev, intr_status);
if (--boguscnt < 0) {
- printk(KERN_WARNING "%s: Too much work at interrupt, "
- "status=0x%4.4x.\n",
- dev->name, intr_status);
+ netdev_warn(dev, "Too much work at interrupt, status=%#04x\n",
+ intr_status);
break;
}
} while (1);
if (yellowfin_debug > 3)
- printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
- dev->name, ioread16(ioaddr + IntrStatus));
+ netdev_printk(KERN_DEBUG, dev, "exiting interrupt, status=%#04x\n",
+ ioread16(ioaddr + IntrStatus));
spin_unlock (&yp->lock);
return IRQ_RETVAL(handled);
@@ -1055,9 +1049,9 @@ static int yellowfin_rx(struct net_device *dev)
int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
if (yellowfin_debug > 4) {
- printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n",
+ printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %08x\n",
entry, yp->rx_ring[entry].result_status);
- printk(KERN_DEBUG " #%d desc. %8.8x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " #%d desc. %08x %08x %08x\n",
entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
yp->rx_ring[entry].result_status);
}
@@ -1081,20 +1075,20 @@ static int yellowfin_rx(struct net_device *dev)
le32_to_cpu(desc->result_status)) & 0xffff;
frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
if (yellowfin_debug > 4)
- printk(KERN_DEBUG " yellowfin_rx() status was %4.4x.\n",
- frame_status);
+ printk(KERN_DEBUG " %s() status was %04x\n",
+ __func__, frame_status);
if (--boguscnt < 0)
break;
if ( ! (desc_status & RX_EOP)) {
if (data_size != 0)
- printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers,"
- " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size);
+ netdev_warn(dev, "Oversized Ethernet frame spanned multiple buffers, status %04x, data_size %d!\n",
+ desc_status, data_size);
dev->stats.rx_length_errors++;
} else if ((yp->drv_flags & IsGigabit) && (frame_status & 0x0038)) {
/* There was a error. */
if (yellowfin_debug > 3)
- printk(KERN_DEBUG " yellowfin_rx() Rx error was %4.4x.\n",
- frame_status);
+ printk(KERN_DEBUG " %s() Rx error was %04x\n",
+ __func__, frame_status);
dev->stats.rx_errors++;
if (frame_status & 0x0060) dev->stats.rx_length_errors++;
if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
@@ -1118,8 +1112,8 @@ static int yellowfin_rx(struct net_device *dev)
entry*sizeof(struct yellowfin_desc)),
"\377\377\377\377\377\377", 6) != 0) {
if (bogus_rx++ == 0)
- printk(KERN_WARNING "%s: Bad frame to %pM\n",
- dev->name, buf_addr);
+ netdev_warn(dev, "Bad frame to %pM\n",
+ buf_addr);
#endif
} else {
struct sk_buff *skb;
@@ -1129,9 +1123,8 @@ static int yellowfin_rx(struct net_device *dev)
#ifndef final_version
if (yellowfin_debug > 4)
- printk(KERN_DEBUG " yellowfin_rx() normal Rx pkt length %d"
- " of %d, bogus_cnt %d.\n",
- pkt_len, data_size, boguscnt);
+ printk(KERN_DEBUG " %s() normal Rx pkt length %d of %d, bogus_cnt %d\n",
+ __func__, pkt_len, data_size, boguscnt);
#endif
/* Check if the packet is long enough to just pass up the skbuff
without copying to a properly sized skbuff. */
@@ -1191,8 +1184,7 @@ static int yellowfin_rx(struct net_device *dev)
static void yellowfin_error(struct net_device *dev, int intr_status)
{
- printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
- dev->name, intr_status);
+ netdev_err(dev, "Something Wicked happened! %04x\n", intr_status);
/* Hmmmmm, it's not clear what to do here. */
if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
dev->stats.tx_errors++;
@@ -1209,13 +1201,13 @@ static int yellowfin_close(struct net_device *dev)
netif_stop_queue (dev);
if (yellowfin_debug > 1) {
- printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x "
- "Rx %4.4x Int %2.2x.\n",
- dev->name, ioread16(ioaddr + TxStatus),
- ioread16(ioaddr + RxStatus),
- ioread16(ioaddr + IntrStatus));
- printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
- dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx);
+ netdev_printk(KERN_DEBUG, dev, "Shutting down ethercard, status was Tx %04x Rx %04x Int %02x\n",
+ ioread16(ioaddr + TxStatus),
+ ioread16(ioaddr + RxStatus),
+ ioread16(ioaddr + IntrStatus));
+ netdev_printk(KERN_DEBUG, dev, "Queue pointers were Tx %d / %d, Rx %d / %d\n",
+ yp->cur_tx, yp->dirty_tx,
+ yp->cur_rx, yp->dirty_rx);
}
/* Disable interrupts by clearing the interrupt mask. */
@@ -1229,33 +1221,35 @@ static int yellowfin_close(struct net_device *dev)
#if defined(__i386__)
if (yellowfin_debug > 2) {
- printk(KERN_DEBUG" Tx ring at %8.8llx:\n",
+ printk(KERN_DEBUG " Tx ring at %08llx:\n",
(unsigned long long)yp->tx_ring_dma);
for (i = 0; i < TX_RING_SIZE*2; i++)
- printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
+ printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x %08x\n",
ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
printk(KERN_DEBUG " Tx status %p:\n", yp->tx_status);
for (i = 0; i < TX_RING_SIZE; i++)
- printk(KERN_DEBUG " #%d status %4.4x %4.4x %4.4x %4.4x.\n",
+ printk(KERN_DEBUG " #%d status %04x %04x %04x %04x\n",
i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
- printk(KERN_DEBUG " Rx ring %8.8llx:\n",
+ printk(KERN_DEBUG " Rx ring %08llx:\n",
(unsigned long long)yp->rx_ring_dma);
for (i = 0; i < RX_RING_SIZE; i++) {
- printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
+ printk(KERN_DEBUG " %c #%d desc. %08x %08x %08x\n",
ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
yp->rx_ring[i].result_status);
if (yellowfin_debug > 6) {
if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
int j;
+
+ printk(KERN_DEBUG);
for (j = 0; j < 0x50; j++)
- printk(" %4.4x",
- get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
- printk("\n");
+ pr_cont(" %04x",
+ get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
+ pr_cont("\n");
}
}
}
@@ -1281,8 +1275,8 @@ static int yellowfin_close(struct net_device *dev)
#ifdef YF_PROTOTYPE /* Support for prototype hardware errata. */
if (yellowfin_debug > 0) {
- printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n",
- dev->name, bogus_rx);
+ netdev_printk(KERN_DEBUG, dev, "Received %d frames that we should not have\n",
+ bogus_rx);
}
#endif
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Checkpatch cleaning
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/skge.c | 81 +++++++++++++++++++++++++++-------------------------
1 files changed, 42 insertions(+), 39 deletions(-)
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 8aa24c5..720af1c 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -71,9 +71,9 @@ MODULE_AUTHOR("Stephen Hemminger <[email protected]>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-static const u32 default_msg
- = NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK
- | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN;
+static const u32 default_msg = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_IFUP |
+ NETIF_MSG_IFDOWN);
static int debug = -1; /* defaults above */
module_param(debug, int, 0);
@@ -188,8 +188,8 @@ static void skge_wol_init(struct skge_port *skge)
/* Force to 10/100 skge_reset will re-enable on resume */
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
- PHY_AN_100FULL | PHY_AN_100HALF |
- PHY_AN_10FULL | PHY_AN_10HALF| PHY_AN_CSMA);
+ (PHY_AN_100FULL | PHY_AN_100HALF |
+ PHY_AN_10FULL | PHY_AN_10HALF | PHY_AN_CSMA));
/* no 1000 HD/FD */
gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, 0);
gm_phy_write(hw, port, PHY_MARV_CTRL,
@@ -258,25 +258,28 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
u32 supported;
if (hw->copper) {
- supported = SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full
- | SUPPORTED_Autoneg| SUPPORTED_TP;
+ supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
if (hw->chip_id == CHIP_ID_GENESIS)
- supported &= ~(SUPPORTED_10baseT_Half
- | SUPPORTED_10baseT_Full
- | SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full);
+ supported &= ~(SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full);
else if (hw->chip_id == CHIP_ID_YUKON)
supported &= ~SUPPORTED_1000baseT_Half;
} else
- supported = SUPPORTED_1000baseT_Full | SUPPORTED_1000baseT_Half
- | SUPPORTED_FIBRE | SUPPORTED_Autoneg;
+ supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
return supported;
}
@@ -366,7 +369,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
}
}
- return (0);
+ return 0;
}
static void skge_get_drvinfo(struct net_device *dev,
@@ -813,7 +816,7 @@ static int skge_get_eeprom_len(struct net_device *dev)
u32 reg2;
pci_read_config_dword(skge->hw->pdev, PCI_DEV_REG2, ®2);
- return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+ return 1 << (((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
}
static u32 skge_vpd_read(struct pci_dev *pdev, int cap, u16 offset)
@@ -1044,7 +1047,7 @@ static int skge_rx_fill(struct net_device *dev)
skb_reserve(skb, NET_IP_ALIGN);
skge_rx_setup(skge, e, skb, skge->rx_buf_size);
- } while ( (e = e->next) != ring->start);
+ } while ((e = e->next) != ring->start);
ring->to_clean = ring->start;
return 0;
@@ -1052,7 +1055,7 @@ static int skge_rx_fill(struct net_device *dev)
static const char *skge_pause(enum pause_status status)
{
- switch(status) {
+ switch (status) {
case FLOW_STAT_NONE:
return "none";
case FLOW_STAT_REM_SEND:
@@ -1322,7 +1325,7 @@ static void bcom_phy_init(struct skge_port *skge)
/* Optimize MDIO transfer by suppressing preamble. */
r = xm_read16(hw, port, XM_MMU_CMD);
r |= XM_MMU_NO_PRE;
- xm_write16(hw, port, XM_MMU_CMD,r);
+ xm_write16(hw, port, XM_MMU_CMD, r);
switch (id1) {
case PHY_BCOM_ID1_C0:
@@ -1512,7 +1515,7 @@ static void xm_link_timer(unsigned long arg)
{
struct skge_port *skge = (struct skge_port *) arg;
struct net_device *dev = skge->netdev;
- struct skge_hw *hw = skge->hw;
+ struct skge_hw *hw = skge->hw;
int port = skge->port;
int i;
unsigned long flags;
@@ -1531,7 +1534,7 @@ static void xm_link_timer(unsigned long arg)
goto link_down;
}
- /* Re-enable interrupt to detect link down */
+ /* Re-enable interrupt to detect link down */
if (xm_check_link(dev)) {
u16 msk = xm_read16(hw, port, XM_IMSK);
msk &= ~XM_IS_INP_ASS;
@@ -1588,7 +1591,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
}
- switch(hw->phy_type) {
+ switch (hw->phy_type) {
case SK_PHY_XMAC:
xm_phy_init(skge);
break;
@@ -1695,7 +1698,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
if (jumbo) {
/* Enable frame flushing if jumbo frames used */
- skge_write16(hw, SK_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH);
+ skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
} else {
/* enable timeout timers if normal frames */
skge_write16(hw, B3_PA_CTRL,
@@ -1710,7 +1713,7 @@ static void genesis_stop(struct skge_port *skge)
unsigned retries = 1000;
u16 cmd;
- /* Disable Tx and Rx */
+ /* Disable Tx and Rx */
cmd = xm_read16(hw, port, XM_MMU_CMD);
cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
xm_write16(hw, port, XM_MMU_CMD, cmd);
@@ -1789,7 +1792,7 @@ static void genesis_mac_intr(struct skge_hw *hw, int port)
"mac interrupt status 0x%x\n", status);
if (hw->phy_type == SK_PHY_XMAC && (status & XM_IS_INP_ASS)) {
- xm_link_down(hw, port);
+ xm_link_down(hw, port);
mod_timer(&skge->link_timer, jiffies + 1);
}
@@ -1823,7 +1826,7 @@ static void genesis_link_up(struct skge_port *skge)
xm_write16(hw, port, XM_MMU_CMD, cmd);
mode = xm_read32(hw, port, XM_MODE);
- if (skge->flow_status== FLOW_STAT_SYMMETRIC ||
+ if (skge->flow_status == FLOW_STAT_SYMMETRIC ||
skge->flow_status == FLOW_STAT_LOC_SEND) {
/*
* Configure Pause Frame Generation
@@ -2466,7 +2469,7 @@ static int skge_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
if (!netif_running(dev))
return -ENODEV; /* Phy still in reset */
- switch(cmd) {
+ switch (cmd) {
case SIOCGMIIPHY:
data->phy_id = hw->phy_addr;
@@ -2765,7 +2768,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
* does. Looks like hardware is wrong?
*/
if (ipip_hdr(skb)->protocol == IPPROTO_UDP &&
- hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
+ hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
control = BMU_TCP_CHECK;
else
control = BMU_UDP_CHECK;
@@ -2777,7 +2780,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
control = BMU_CHECK;
if (!skb_shinfo(skb)->nr_frags) /* single buffer i.e. no fragments */
- control |= BMU_EOF| BMU_IRQ_EOF;
+ control |= BMU_EOF | BMU_IRQ_EOF;
else {
struct skge_tx_desc *tf = td;
@@ -3077,7 +3080,7 @@ static struct sk_buff *skge_rx_get(struct net_device *dev,
pci_unmap_len(e, maplen),
PCI_DMA_FROMDEVICE);
skb = e->skb;
- prefetch(skb->data);
+ prefetch(skb->data);
skge_rx_setup(skge, e, nskb, skge->rx_buf_size);
}
@@ -3554,8 +3557,7 @@ static int skge_reset(struct skge_hw *hw)
hw->ram_offset = 0x80000;
} else
hw->ram_size = t8 * 512;
- }
- else if (t8 == 0)
+ } else if (t8 == 0)
hw->ram_size = 0x20000;
else
hw->ram_size = t8 * 4096;
@@ -3709,7 +3711,7 @@ static int skge_device_event(struct notifier_block *unused,
goto done;
skge = netdev_priv(dev);
- switch(event) {
+ switch (event) {
case NETDEV_CHANGENAME:
if (skge->debugfs) {
d = debugfs_rename(skge_debug, skge->debugfs,
@@ -3914,7 +3916,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
err = -ENOMEM;
/* space for skge@pci:0000:04:00.0 */
- hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:" )
+ hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
+ strlen(pci_name(pdev)) + 1, GFP_KERNEL);
if (!hw) {
dev_err(&pdev->dev, "cannot allocate hardware struct\n");
@@ -4010,7 +4012,8 @@ static void __devexit skge_remove(struct pci_dev *pdev)
flush_scheduled_work();
- if ((dev1 = hw->dev[1]))
+ dev1 = hw->dev[1];
+ if (dev1)
unregister_netdev(dev1);
dev0 = hw->dev[0];
unregister_netdev(dev0);
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level> and netif_msg_<test>
Remove local #define net_<test> macros
Remove periods from formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/sis190.c | 152 +++++++++++++++++++++++++-------------------------
1 files changed, 75 insertions(+), 77 deletions(-)
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 8c4e38f..b1a4b75 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -17,7 +17,9 @@
See the file COPYING in this distribution for more information.
- */
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -32,17 +34,6 @@
#include <linux/dma-mapping.h>
#include <asm/irq.h>
-#define net_drv(p, arg...) if (netif_msg_drv(p)) \
- printk(arg)
-#define net_probe(p, arg...) if (netif_msg_probe(p)) \
- printk(arg)
-#define net_link(p, arg...) if (netif_msg_link(p)) \
- printk(arg)
-#define net_intr(p, arg...) if (netif_msg_intr(p)) \
- printk(arg)
-#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \
- printk(arg)
-
#define PHY_MAX_ADDR 32
#define PHY_ID_ANY 0x1f
#define MII_REG_ANY 0x1f
@@ -50,7 +41,6 @@
#define DRV_VERSION "1.3"
#define DRV_NAME "sis190"
#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
-#define PFX DRV_NAME ": "
#define sis190_rx_skb netif_rx
#define sis190_rx_quota(count, quota) count
@@ -381,7 +371,7 @@ static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
}
if (i > 99)
- printk(KERN_ERR PFX "PHY command failed !\n");
+ pr_err("PHY command failed !\n");
}
static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
@@ -589,8 +579,7 @@ static int sis190_rx_interrupt(struct net_device *dev,
status = le32_to_cpu(desc->PSize);
- // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name,
- // status);
+ //netif_info(tp, intr, dev, "Rx PSize = %08x\n", status);
if (sis190_rx_pkt_err(status, stats) < 0)
sis190_give_to_asic(desc, tp->rx_buf_sz);
@@ -601,9 +590,8 @@ static int sis190_rx_interrupt(struct net_device *dev,
struct pci_dev *pdev = tp->pci_dev;
if (unlikely(pkt_size > tp->rx_buf_sz)) {
- net_intr(tp, KERN_INFO
- "%s: (frag) status = %08x.\n",
- dev->name, status);
+ netif_info(tp, intr, dev,
+ "(frag) status = %08x\n", status);
stats->rx_dropped++;
stats->rx_length_errors++;
sis190_give_to_asic(desc, tp->rx_buf_sz);
@@ -637,12 +625,12 @@ static int sis190_rx_interrupt(struct net_device *dev,
tp->cur_rx = cur_rx;
delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
- if (!delta && count && netif_msg_intr(tp))
- printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name);
+ if (!delta && count)
+ netif_info(tp, intr, dev, "no Rx buffer allocated\n");
tp->dirty_rx += delta;
- if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp))
- printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name);
+ if ((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx)
+ netif_emerg(tp, intr, dev, "Rx buffers exhausted\n");
return count;
}
@@ -751,10 +739,10 @@ static irqreturn_t sis190_interrupt(int irq, void *__dev)
SIS_W32(IntrStatus, status);
- // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status);
+// netif_info(tp, intr, dev, "status = %08x\n", status);
if (status & LinkChange) {
- net_intr(tp, KERN_INFO "%s: link change.\n", dev->name);
+ netif_info(tp, intr, dev, "link change\n");
schedule_work(&tp->phy_task);
}
@@ -932,8 +920,7 @@ static void sis190_phy_task(struct work_struct *work)
} else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
BMSR_ANEGCOMPLETE)) {
netif_carrier_off(dev);
- net_link(tp, KERN_WARNING "%s: auto-negotiating...\n",
- dev->name);
+ netif_warn(tp, link, dev, "auto-negotiating...\n");
mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
} else {
/* Rejoice ! */
@@ -959,13 +946,13 @@ static void sis190_phy_task(struct work_struct *work)
u16 adv, autoexp, gigadv, gigrec;
val = mdio_read(ioaddr, phy_id, 0x1f);
- net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
+ netif_info(tp, link, dev, "mii ext = %04x\n", val);
val = mdio_read(ioaddr, phy_id, MII_LPA);
adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION);
- net_link(tp, KERN_INFO "%s: mii lpa=%04x adv=%04x exp=%04x.\n",
- dev->name, val, adv, autoexp);
+ netif_info(tp, link, dev, "mii lpa=%04x adv=%04x exp=%04x\n",
+ val, adv, autoexp);
if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) {
/* check for gigabit speed */
@@ -1004,8 +991,7 @@ static void sis190_phy_task(struct work_struct *work)
SIS_W32(RGDelay, 0x0440);
}
- net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
- p->msg);
+ netif_info(tp, link, dev, "link on %s mode\n", p->msg);
netif_carrier_on(dev);
}
@@ -1191,9 +1177,8 @@ static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
netif_stop_queue(dev);
- net_tx_err(tp, KERN_ERR PFX
- "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netif_err(tp, tx_err, dev,
+ "BUG! Tx Ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
@@ -1287,9 +1272,9 @@ static u16 sis190_default_phy(struct net_device *dev)
if (mii_if->phy_id != phy_default->phy_id) {
mii_if->phy_id = phy_default->phy_id;
- net_probe(tp, KERN_INFO
- "%s: Using transceiver at address %d as default.\n",
- pci_name(tp->pci_dev), mii_if->phy_id);
+ if (netif_msg_probe(tp))
+ pr_info("%s: Using transceiver at address %d as default\n",
+ pci_name(tp->pci_dev), mii_if->phy_id);
}
status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
@@ -1327,14 +1312,15 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
LAN : HOME) : p->type;
tp->features |= p->feature;
- net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
- pci_name(tp->pci_dev), p->name, phy_id);
+ if (netif_msg_probe(tp))
+ pr_info("%s: %s transceiver at address %d\n",
+ pci_name(tp->pci_dev), p->name, phy_id);
} else {
phy->type = UNKNOWN;
- net_probe(tp, KERN_INFO
- "%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
- pci_name(tp->pci_dev),
- phy->id[0], (phy->id[1] & 0xfff0), phy_id);
+ if (netif_msg_probe(tp))
+ pr_info("%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
+ pci_name(tp->pci_dev),
+ phy->id[0], (phy->id[1] & 0xfff0), phy_id);
}
}
@@ -1398,8 +1384,9 @@ static int __devinit sis190_mii_probe(struct net_device *dev)
}
if (list_empty(&tp->first_phy)) {
- net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
- pci_name(tp->pci_dev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: No MII transceivers found!\n",
+ pci_name(tp->pci_dev));
rc = -EIO;
goto out;
}
@@ -1445,7 +1432,8 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
dev = alloc_etherdev(sizeof(*tp));
if (!dev) {
- net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n");
+ if (netif_msg_drv(&debug))
+ pr_err("unable to alloc new ethernet\n");
rc = -ENOMEM;
goto err_out_0;
}
@@ -1458,34 +1446,39 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
rc = pci_enable_device(pdev);
if (rc < 0) {
- net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: enable failure\n", pci_name(pdev));
goto err_free_dev_1;
}
rc = -ENODEV;
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: region #0 is no MMIO resource\n",
+ pci_name(pdev));
goto err_pci_disable_2;
}
if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
- net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: invalid PCI region size(s)\n",
+ pci_name(pdev));
goto err_pci_disable_2;
}
rc = pci_request_regions(pdev, DRV_NAME);
if (rc < 0) {
- net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: could not request regions\n",
+ pci_name(pdev));
goto err_pci_disable_2;
}
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
- net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: DMA configuration failed\n",
+ pci_name(pdev));
goto err_free_res_3;
}
@@ -1493,8 +1486,9 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
if (!ioaddr) {
- net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: cannot remap MMIO, aborting\n",
+ pci_name(pdev));
rc = -EIO;
goto err_free_res_3;
}
@@ -1530,9 +1524,8 @@ static void sis190_tx_timeout(struct net_device *dev)
if (tmp8 & CmdTxEnb)
SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
-
- net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n",
- dev->name, SIS_R32(TxControl), SIS_R32(TxSts));
+ netif_info(tp, tx_err, dev, "Transmit timeout, status %08x %08x\n",
+ SIS_R32(TxControl), SIS_R32(TxSts));
/* Disable interrupts by clearing the interrupt mask. */
SIS_W32(IntrMask, 0x0000);
@@ -1561,15 +1554,16 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
u16 sig;
int i;
- net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: Read MAC address from EEPROM\n", pci_name(pdev));
/* Check to see if there is a sane EEPROM */
sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
if ((sig == 0xffff) || (sig == 0x0000)) {
- net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
- pci_name(pdev), sig);
+ if (netif_msg_probe(tp))
+ pr_info("%s: Error EEPROM read %x\n",
+ pci_name(pdev), sig);
return -EIO;
}
@@ -1603,8 +1597,8 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
u8 reg, tmp8;
unsigned int i;
- net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: Read MAC address from APC\n", pci_name(pdev));
for (i = 0; i < ARRAY_SIZE(ids); i++) {
isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL);
@@ -1613,8 +1607,9 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
}
if (!isa_bridge) {
- net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: Can not find ISA bridge\n",
+ pci_name(pdev));
return -EIO;
}
@@ -1695,7 +1690,7 @@ static void sis190_set_speed_auto(struct net_device *dev)
int phy_id = tp->mii_if.phy_id;
int val;
- net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name);
+ netif_info(tp, link, dev, "Enabling Auto-negotiation\n");
val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
@@ -1822,7 +1817,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
int rc;
if (!printed_version) {
- net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
+ if (netif_msg_drv(&debug))
+ pr_info(SIS190_DRIVER_NAME " loaded\n");
printed_version = 1;
}
@@ -1862,12 +1858,14 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
if (rc < 0)
goto err_remove_mii;
- net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), %pM\n",
- pci_name(pdev), sis_chip_info[ent->driver_data].name,
- ioaddr, dev->irq, dev->dev_addr);
-
- net_probe(tp, KERN_INFO "%s: %s mode.\n", dev->name,
- (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+ if (netif_msg_probe(tp)) {
+ netdev_info(dev, "%s: %s at %p (IRQ: %d), %pM\n",
+ pci_name(pdev),
+ sis_chip_info[ent->driver_data].name,
+ ioaddr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "%s mode.\n",
+ (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+ }
netif_carrier_off(dev);
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Checkpatch cleaning
Convert formats like 0x%08x to %#08x
Remove periods from formats
Coalesce long formats
Use print_hex_dump
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/pci-skeleton.c | 1019 ++++++++++++++++++++++----------------------
1 files changed, 503 insertions(+), 516 deletions(-)
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index bbdf039..11d4398 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -11,7 +11,7 @@
-----<snip>-----
- Written 1997-2000 by Donald Becker.
+ Written 1997-2000 by Donald Becker.
This software may be used and distributed according to the
terms of the GNU General Public License (GPL), incorporated
herein by reference. Drivers based on or derived from this
@@ -85,6 +85,8 @@ IVc. Errata
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -96,16 +98,15 @@ IVc. Errata
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/crc32.h>
-#include <asm/io.h>
+#include <linux/io.h>
#define NETDRV_VERSION "1.0.1"
#define MODNAME "netdrv"
#define NETDRV_DRIVER_LOAD_MSG "MyVendor Fast Ethernet driver " NETDRV_VERSION " loaded"
-#define PFX MODNAME ": "
static char version[] __devinitdata =
-KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
-" Support available from http://foo.com/bar/baz.html\n";
+ KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
+ " Support available from http://foo.com/bar/baz.html\n";
/* define to 1 to enable PIO instead of MMIO */
#undef USE_IO_OPS
@@ -119,19 +120,24 @@ KERN_INFO NETDRV_DRIVER_LOAD_MSG "\n"
#ifdef NETDRV_DEBUG
/* note: prints function name for you */
-# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#define DPRINTK(fmt, args...) \
+ printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
#else
-# define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG fmt, ##args); \
+} while (0)
#endif
#ifdef NETDRV_NDEBUG
-# define assert(expr) do {} while (0)
+#define assert(expr) do {} while (0)
#else
-# define assert(expr) \
- if(!(expr)) { \
- printk( "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__func__,__LINE__); \
- }
+#define assert(expr) \
+ if (!(expr)) { \
+ printk("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
+ }
#endif
@@ -148,10 +154,10 @@ static int multicast_filter_limit = 32;
/* Size of the in-memory receive ring. */
#define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */
-#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
-#define RX_BUF_PAD 16
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+#define RX_BUF_PAD 16
#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
-#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
+#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
/* Number of Tx descriptor registers. */
#define NUM_TX_DESC 4
@@ -165,9 +171,11 @@ static int multicast_filter_limit = 32;
/* PCI Tuning Parameters
Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
+#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
-/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+/* The following settings are log_2(bytes)-4:
+ 0==16 bytes 1==32 2==64 3==128 4==256 5==512 6==1024 7==end of packet.
+*/
#define RX_FIFO_THRESH 6 /* Rx buffer level before first PCI xfer. */
#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
@@ -175,8 +183,7 @@ static int multicast_filter_limit = 32;
/* Operational parameters that usually are not changed. */
/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT (6*HZ)
-
+#define TX_TIMEOUT (6 * HZ)
enum {
HAS_CHIP_XCVR = 0x020000,
@@ -186,7 +193,7 @@ enum {
#define NETDRV_MIN_IO_SIZE 0x80
#define RTL8139B_IO_SIZE 256
-#define NETDRV_CAPS HAS_CHIP_XCVR|HAS_LNK_CHNG
+#define NETDRV_CAPS (HAS_CHIP_XCVR | HAS_LNK_CHNG)
typedef enum {
RTL8139 = 0,
@@ -220,7 +227,7 @@ static DEFINE_PCI_DEVICE_TABLE(netdrv_pci_tbl) = {
{0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ADDTRON8139 },
{0,}
};
-MODULE_DEVICE_TABLE (pci, netdrv_pci_tbl);
+MODULE_DEVICE_TABLE(pci, netdrv_pci_tbl);
/* The rest of these values should never change. */
@@ -270,7 +277,7 @@ enum NETDRV_registers {
enum ClearBitMasks {
MultiIntrClear = 0xF000,
ChipCmdClear = 0xE2,
- Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
+ Config1Clear = (1 << 7) | (1 << 6) | (1 << 3) | (1 << 2) | (1 << 1),
};
enum ChipCmdBits {
@@ -329,7 +336,7 @@ enum tx_config_bits {
TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
TxCRC = (1 << 16), /* DISABLE appending CRC to end of Tx packets */
TxClearAbt = (1 << 0), /* Clear abort (WO) */
- TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
+ TxDMAShift = 8, /* DMA burst value(0-7) is shift this many bits */
TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
};
@@ -481,41 +488,44 @@ struct netdrv_private {
chip_t chipset;
};
-MODULE_AUTHOR ("Jeff Garzik <[email protected]>");
-MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
+MODULE_AUTHOR("Jeff Garzik <[email protected]>");
+MODULE_DESCRIPTION("Skeleton for a PCI Fast Ethernet driver");
MODULE_LICENSE("GPL");
module_param(multicast_filter_limit, int, 0);
module_param(max_interrupt_work, int, 0);
module_param_array(media, int, NULL, 0);
-MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
-MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
-
-static int read_eeprom (void *ioaddr, int location, int addr_len);
-static int netdrv_open (struct net_device *dev);
-static int mdio_read (struct net_device *dev, int phy_id, int location);
-static void mdio_write (struct net_device *dev, int phy_id, int location,
- int val);
-static void netdrv_timer (unsigned long data);
-static void netdrv_tx_timeout (struct net_device *dev);
-static void netdrv_init_ring (struct net_device *dev);
-static int netdrv_start_xmit (struct sk_buff *skb,
- struct net_device *dev);
-static irqreturn_t netdrv_interrupt (int irq, void *dev_instance);
-static int netdrv_close (struct net_device *dev);
-static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
-static void netdrv_set_rx_mode (struct net_device *dev);
-static void netdrv_hw_start (struct net_device *dev);
+MODULE_PARM_DESC(multicast_filter_limit,
+ MODNAME " maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(max_interrupt_work,
+ MODNAME " maximum events handled per interrupt");
+MODULE_PARM_DESC(media,
+ MODNAME " Bits 0-3: media type, bit 17: full duplex");
+
+static int read_eeprom(void *ioaddr, int location, int addr_len);
+static int netdrv_open(struct net_device *dev);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *dev, int phy_id, int location,
+ int val);
+static void netdrv_timer(unsigned long data);
+static void netdrv_tx_timeout(struct net_device *dev);
+static void netdrv_init_ring(struct net_device *dev);
+static int netdrv_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t netdrv_interrupt(int irq, void *dev_instance);
+static int netdrv_close(struct net_device *dev);
+static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void netdrv_set_rx_mode(struct net_device *dev);
+static void netdrv_hw_start(struct net_device *dev);
#ifdef USE_IO_OPS
-#define NETDRV_R8(reg) inb (((unsigned long)ioaddr) + (reg))
-#define NETDRV_R16(reg) inw (((unsigned long)ioaddr) + (reg))
-#define NETDRV_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg)))
-#define NETDRV_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg))
-#define NETDRV_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_R8(reg) inb(((unsigned long)ioaddr) + (reg))
+#define NETDRV_R16(reg) inw(((unsigned long)ioaddr) + (reg))
+#define NETDRV_R32(reg) ((unsigned long)inl(((unsigned long)ioaddr) + (reg)))
+#define NETDRV_W8(reg, val8) outb((val8), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W16(reg, val16) outw((val16), ((unsigned long)ioaddr) + (reg))
+#define NETDRV_W32(reg, val32) outl((val32), ((unsigned long)ioaddr) + (reg))
#define NETDRV_W8_F NETDRV_W8
#define NETDRV_W16_F NETDRV_W16
#define NETDRV_W32_F NETDRV_W32
@@ -528,25 +538,37 @@ static void netdrv_hw_start (struct net_device *dev);
#define readb(addr) inb((unsigned long)(addr))
#define readw(addr) inw((unsigned long)(addr))
#define readl(addr) inl((unsigned long)(addr))
-#define writeb(val,addr) outb((val),(unsigned long)(addr))
-#define writew(val,addr) outw((val),(unsigned long)(addr))
-#define writel(val,addr) outl((val),(unsigned long)(addr))
+#define writeb(val, addr) outb((val), (unsigned long)(addr))
+#define writew(val, addr) outw((val), (unsigned long)(addr))
+#define writel(val, addr) outl((val), (unsigned long)(addr))
#else
/* write MMIO register, with flush */
/* Flush avoids rtl8139 bug w/ posted MMIO writes */
-#define NETDRV_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0)
-#define NETDRV_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0)
-#define NETDRV_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0)
+#define NETDRV_W8_F(reg, val8) \
+do { \
+ writeb((val8), ioaddr + (reg)); \
+ readb(ioaddr + (reg)); \
+} while (0)
+#define NETDRV_W16_F(reg, val16) \
+do { \
+ writew((val16), ioaddr + (reg)); \
+ readw(ioaddr + (reg)); \
+} while (0)
+#define NETDRV_W32_F(reg, val32) \
+do { \
+ writel((val32), ioaddr + (reg)); \
+ readl(ioaddr + (reg)); \
+} while (0)
#ifdef MMIO_FLUSH_AUDIT_COMPLETE
/* write MMIO register */
-#define NETDRV_W8(reg, val8) writeb ((val8), ioaddr + (reg))
-#define NETDRV_W16(reg, val16) writew ((val16), ioaddr + (reg))
-#define NETDRV_W32(reg, val32) writel ((val32), ioaddr + (reg))
+#define NETDRV_W8(reg, val8) writeb((val8), ioaddr + (reg))
+#define NETDRV_W16(reg, val16) writew((val16), ioaddr + (reg))
+#define NETDRV_W32(reg, val32) writel((val32), ioaddr + (reg))
#else
@@ -558,9 +580,9 @@ static void netdrv_hw_start (struct net_device *dev);
#endif /* MMIO_FLUSH_AUDIT_COMPLETE */
/* read MMIO register */
-#define NETDRV_R8(reg) readb (ioaddr + (reg))
-#define NETDRV_R16(reg) readw (ioaddr + (reg))
-#define NETDRV_R32(reg) ((unsigned long) readl (ioaddr + (reg)))
+#define NETDRV_R8(reg) readb(ioaddr + (reg))
+#define NETDRV_R16(reg) readw(ioaddr + (reg))
+#define NETDRV_R32(reg) ((unsigned long) readl(ioaddr + (reg)))
#endif /* USE_IO_OPS */
@@ -570,14 +592,14 @@ static const u16 netdrv_intr_mask =
TxErr | TxOK | RxErr | RxOK;
static const unsigned int netdrv_rx_config =
- RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
- (RX_FIFO_THRESH << RxCfgFIFOShift) |
- (RX_DMA_BURST << RxCfgDMAShift);
+ RxCfgEarlyRxNone | RxCfgRcv32K | RxNoWrap |
+ (RX_FIFO_THRESH << RxCfgFIFOShift) |
+ (RX_DMA_BURST << RxCfgDMAShift);
-static int __devinit netdrv_init_board (struct pci_dev *pdev,
- struct net_device **dev_out,
- void **ioaddr_out)
+static int __devinit netdrv_init_board(struct pci_dev *pdev,
+ struct net_device **dev_out,
+ void **ioaddr_out)
{
void *ioaddr = NULL;
struct net_device *dev;
@@ -587,43 +609,43 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
u32 tmp;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- assert (pdev != NULL);
- assert (ioaddr_out != NULL);
+ assert(pdev != NULL);
+ assert(ioaddr_out != NULL);
*ioaddr_out = NULL;
*dev_out = NULL;
/* dev zeroed in alloc_etherdev */
- dev = alloc_etherdev (sizeof (*tp));
+ dev = alloc_etherdev(sizeof(*tp));
if (dev == NULL) {
dev_err(&pdev->dev, "unable to alloc new ethernet\n");
- DPRINTK ("EXIT, returning -ENOMEM\n");
+ DPRINTK("EXIT, returning -ENOMEM\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
tp = netdev_priv(dev);
- /* enable device (incl. PCI PM wakeup), and bus-mastering */
- rc = pci_enable_device (pdev);
+ /* enable device(incl. PCI PM wakeup), and bus-mastering */
+ rc = pci_enable_device(pdev);
if (rc)
goto err_out;
- pio_start = pci_resource_start (pdev, 0);
- pio_end = pci_resource_end (pdev, 0);
- pio_flags = pci_resource_flags (pdev, 0);
- pio_len = pci_resource_len (pdev, 0);
+ pio_start = pci_resource_start(pdev, 0);
+ pio_end = pci_resource_end(pdev, 0);
+ pio_flags = pci_resource_flags(pdev, 0);
+ pio_len = pci_resource_len(pdev, 0);
- mmio_start = pci_resource_start (pdev, 1);
- mmio_end = pci_resource_end (pdev, 1);
- mmio_flags = pci_resource_flags (pdev, 1);
- mmio_len = pci_resource_len (pdev, 1);
+ mmio_start = pci_resource_start(pdev, 1);
+ mmio_end = pci_resource_end(pdev, 1);
+ mmio_flags = pci_resource_flags(pdev, 1);
+ mmio_len = pci_resource_len(pdev, 1);
/* set this immediately, we need to know before
* we talk to the chip directly */
- DPRINTK("PIO region size == 0x%02X\n", pio_len);
- DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+ DPRINTK("PIO region size == %#02X\n", pio_len);
+ DPRINTK("MMIO region size == %#02lX\n", mmio_len);
/* make sure PCI base addr 0 is PIO */
if (!(pio_flags & IORESOURCE_IO)) {
@@ -647,17 +669,17 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
goto err_out;
}
- rc = pci_request_regions (pdev, MODNAME);
+ rc = pci_request_regions(pdev, MODNAME);
if (rc)
goto err_out;
- pci_set_master (pdev);
+ pci_set_master(pdev);
#ifdef USE_IO_OPS
- ioaddr = (void *) pio_start;
+ ioaddr = (void *)pio_start;
#else
/* ioremap MMIO region */
- ioaddr = ioremap (mmio_start, mmio_len);
+ ioaddr = ioremap(mmio_start, mmio_len);
if (ioaddr == NULL) {
dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
rc = -EIO;
@@ -666,52 +688,50 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev,
#endif /* USE_IO_OPS */
/* Soft reset the chip. */
- NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset);
+ NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
/* Check that the chip has finished the reset. */
for (i = 1000; i > 0; i--)
- if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0)
+ if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
break;
else
- udelay (10);
+ udelay(10);
/* Bring the chip out of low-power mode. */
/* <insert device-specific code here> */
#ifndef USE_IO_OPS
/* sanity checks -- ensure PIO and MMIO registers agree */
- assert (inb (pio_start+Config0) == readb (ioaddr+Config0));
- assert (inb (pio_start+Config1) == readb (ioaddr+Config1));
- assert (inb (pio_start+TxConfig) == readb (ioaddr+TxConfig));
- assert (inb (pio_start+RxConfig) == readb (ioaddr+RxConfig));
+ assert(inb(pio_start+Config0) == readb(ioaddr+Config0));
+ assert(inb(pio_start+Config1) == readb(ioaddr+Config1));
+ assert(inb(pio_start+TxConfig) == readb(ioaddr+TxConfig));
+ assert(inb(pio_start+RxConfig) == readb(ioaddr+RxConfig));
#endif /* !USE_IO_OPS */
/* identify chip attached to board */
- tmp = NETDRV_R8 (ChipVersion);
- for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--)
+ tmp = NETDRV_R8(ChipVersion);
+ for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--)
if (tmp == rtl_chip_info[i].version) {
tp->chipset = i;
goto match;
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
- dev_printk (KERN_DEBUG, &pdev->dev,
- "unknown chip version, assuming RTL-8139\n");
- dev_printk (KERN_DEBUG, &pdev->dev, "TxConfig = 0x%lx\n",
- NETDRV_R32 (TxConfig));
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "unknown chip version, assuming RTL-8139\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "TxConfig = %#lx\n",
+ NETDRV_R32(TxConfig));
tp->chipset = 0;
match:
- DPRINTK ("chipset id (%d) == index %d, '%s'\n",
- tmp,
- tp->chipset,
- rtl_chip_info[tp->chipset].name);
+ DPRINTK("chipset id(%d) == index %d, '%s'\n",
+ tmp, tp->chipset, rtl_chip_info[tp->chipset].name);
- rc = register_netdev (dev);
+ rc = register_netdev(dev);
if (rc)
goto err_out_unmap;
- DPRINTK ("EXIT, returning 0\n");
+ DPRINTK("EXIT, returning 0\n");
*ioaddr_out = ioaddr;
*dev_out = dev;
return 0;
@@ -721,10 +741,10 @@ err_out_unmap:
iounmap(ioaddr);
err_out_free_res:
#endif
- pci_release_regions (pdev);
+ pci_release_regions(pdev);
err_out:
- free_netdev (dev);
- DPRINTK ("EXIT, returning %d\n", rc);
+ free_netdev(dev);
+ DPRINTK("EXIT, returning %d\n", rc);
return rc;
}
@@ -740,8 +760,8 @@ static const struct net_device_ops netdrv_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
};
-static int __devinit netdrv_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __devinit netdrv_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
struct net_device *dev = NULL;
struct netdrv_private *tp;
@@ -756,29 +776,29 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
printk(version);
#endif
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- assert (pdev != NULL);
- assert (ent != NULL);
+ assert(pdev != NULL);
+ assert(ent != NULL);
board_idx++;
- i = netdrv_init_board (pdev, &dev, &ioaddr);
+ i = netdrv_init_board(pdev, &dev, &ioaddr);
if (i < 0) {
- DPRINTK ("EXIT, returning %d\n", i);
+ DPRINTK("EXIT, returning %d\n", i);
return i;
}
tp = netdev_priv(dev);
- assert (ioaddr != NULL);
- assert (dev != NULL);
- assert (tp != NULL);
+ assert(ioaddr != NULL);
+ assert(dev != NULL);
+ assert(tp != NULL);
- addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
+ addr_len = read_eeprom(ioaddr, 0, 8) == 0x8129 ? 8 : 6;
for (i = 0; i < 3; i++)
- ((u16 *) (dev->dev_addr))[i] =
- le16_to_cpu (read_eeprom (ioaddr, i + 7, addr_len));
+ ((u16 *)(dev->dev_addr))[i] =
+ le16_to_cpu(read_eeprom(ioaddr, i + 7, addr_len));
dev->netdev_ops = &netdrv_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
@@ -791,7 +811,7 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
/* note: tp->chipset set in netdrv_init_board */
tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER | NETDRV_CAPS;
+ PCI_COMMAND_MASTER | NETDRV_CAPS;
tp->pci_dev = pdev;
tp->board = ent->driver_data;
tp->mmio_addr = ioaddr;
@@ -801,18 +821,15 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
tp->phys[0] = 32;
- printk (KERN_INFO "%s: %s at 0x%lx, %pM IRQ %d\n",
- dev->name,
- board_info[ent->driver_data].name,
- dev->base_addr,
- dev->dev_addr,
- dev->irq);
+ netdev_info(dev, "%s at %#lx, %pM IRQ %d\n",
+ board_info[ent->driver_data].name,
+ dev->base_addr, dev->dev_addr, dev->irq);
- printk (KERN_DEBUG "%s: Identified 8139 chip type '%s'\n",
- dev->name, rtl_chip_info[tp->chipset].name);
+ netdev_printk(KERN_DEBUG, dev, "Identified 8139 chip type '%s'\n",
+ rtl_chip_info[tp->chipset].name);
/* Put the chip into low-power mode. */
- NETDRV_W8_F (Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
/* The lower four bits are the media type. */
option = (board_idx > 7) ? 0 : media[board_idx];
@@ -824,45 +841,43 @@ static int __devinit netdrv_init_one (struct pci_dev *pdev,
}
if (tp->full_duplex) {
- printk (KERN_INFO
- "%s: Media type forced to Full Duplex.\n",
- dev->name);
- mdio_write (dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
+ netdev_info(dev, "Media type forced to Full Duplex\n");
+ mdio_write(dev, tp->phys[0], MII_ADVERTISE, ADVERTISE_FULL);
tp->duplex_lock = 1;
}
- DPRINTK ("EXIT - returning 0\n");
+ DPRINTK("EXIT - returning 0\n");
return 0;
}
-static void __devexit netdrv_remove_one (struct pci_dev *pdev)
+static void __devexit netdrv_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata (pdev);
+ struct net_device *dev = pci_get_drvdata(pdev);
struct netdrv_private *np;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- assert (dev != NULL);
+ assert(dev != NULL);
np = netdev_priv(dev);
- assert (np != NULL);
+ assert(np != NULL);
- unregister_netdev (dev);
+ unregister_netdev(dev);
#ifndef USE_IO_OPS
- iounmap (np->mmio_addr);
+ iounmap(np->mmio_addr);
#endif /* !USE_IO_OPS */
- pci_release_regions (pdev);
+ pci_release_regions(pdev);
- free_netdev (dev);
+ free_netdev(dev);
- pci_set_drvdata (pdev, NULL);
+ pci_set_drvdata(pdev, NULL);
- pci_disable_device (pdev);
+ pci_disable_device(pdev);
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
}
@@ -870,63 +885,63 @@ static void __devexit netdrv_remove_one (struct pci_dev *pdev)
/* EEPROM_Ctrl bits. */
#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
-#define EE_CS 0x08 /* EEPROM chip select. */
+#define EE_CS 0x08 /* EEPROM chip select. */
#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
-#define EE_WRITE_0 0x00
-#define EE_WRITE_1 0x02
+#define EE_WRITE_0 0x00
+#define EE_WRITE_1 0x02
#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
-#define EE_ENB (0x80 | EE_CS)
+#define EE_ENB (0x80 | EE_CS)
/* Delay between EEPROM clock transitions.
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
- */
+*/
#define eeprom_delay() readl(ee_addr)
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD (5)
-#define EE_READ_CMD (6)
+#define EE_READ_CMD (6)
#define EE_ERASE_CMD (7)
-static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
+static int __devinit read_eeprom(void *ioaddr, int location, int addr_len)
{
int i;
unsigned retval = 0;
void *ee_addr = ioaddr + Cfg9346;
int read_cmd = location | (EE_READ_CMD << addr_len);
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- writeb (EE_ENB & ~EE_CS, ee_addr);
- writeb (EE_ENB, ee_addr);
- eeprom_delay ();
+ writeb(EE_ENB & ~EE_CS, ee_addr);
+ writeb(EE_ENB, ee_addr);
+ eeprom_delay();
/* Shift the read command bits out. */
for (i = 4 + addr_len; i >= 0; i--) {
int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
- writeb (EE_ENB | dataval, ee_addr);
- eeprom_delay ();
- writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
- eeprom_delay ();
+ writeb(EE_ENB | dataval, ee_addr);
+ eeprom_delay();
+ writeb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
}
- writeb (EE_ENB, ee_addr);
- eeprom_delay ();
+ writeb(EE_ENB, ee_addr);
+ eeprom_delay();
for (i = 16; i > 0; i--) {
- writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
- eeprom_delay ();
+ writeb(EE_ENB | EE_SHIFT_CLK, ee_addr);
+ eeprom_delay();
retval =
- (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 :
- 0);
- writeb (EE_ENB, ee_addr);
- eeprom_delay ();
+ (retval << 1) | ((readb(ee_addr) & EE_DATA_READ) ? 1 :
+ 0);
+ writeb(EE_ENB, ee_addr);
+ eeprom_delay();
}
/* Terminate the EEPROM access. */
- writeb (~EE_CS, ee_addr);
- eeprom_delay ();
+ writeb(~EE_CS, ee_addr);
+ eeprom_delay();
- DPRINTK ("EXIT - returning %d\n", retval);
+ DPRINTK("EXIT - returning %d\n", retval);
return retval;
}
@@ -936,12 +951,12 @@ static int __devinit read_eeprom (void *ioaddr, int location, int addr_len)
The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
met by back-to-back PCI I/O cycles, but we insert a delay to avoid
"overclocking" issues. */
-#define MDIO_DIR 0x80
+#define MDIO_DIR 0x80
#define MDIO_DATA_OUT 0x04
#define MDIO_DATA_IN 0x02
-#define MDIO_CLK 0x01
-#define MDIO_WRITE0 (MDIO_DIR)
-#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
+#define MDIO_CLK 0x01
+#define MDIO_WRITE0 (MDIO_DIR)
+#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
#define mdio_delay() readb(mdio_addr)
@@ -959,24 +974,24 @@ static char mii_2_8139_map[8] = {
/* Syncronize the MII management interface by shifting 32 one bits out. */
-static void mdio_sync (void *mdio_addr)
+static void mdio_sync(void *mdio_addr)
{
int i;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
for (i = 32; i >= 0; i--) {
- writeb (MDIO_WRITE1, mdio_addr);
- mdio_delay ();
- writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr);
- mdio_delay ();
+ writeb(MDIO_WRITE1, mdio_addr);
+ mdio_delay();
+ writeb(MDIO_WRITE1 | MDIO_CLK, mdio_addr);
+ mdio_delay();
}
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
}
-static int mdio_read (struct net_device *dev, int phy_id, int location)
+static int mdio_read(struct net_device *dev, int phy_id, int location)
{
struct netdrv_private *tp = netdev_priv(dev);
void *mdio_addr = tp->mmio_addr + Config4;
@@ -984,97 +999,94 @@ static int mdio_read (struct net_device *dev, int phy_id, int location)
int retval = 0;
int i;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
- DPRINTK ("EXIT after directly using 8139 internal regs\n");
+ DPRINTK("EXIT after directly using 8139 internal regs\n");
return location < 8 && mii_2_8139_map[location] ?
- readw (tp->mmio_addr + mii_2_8139_map[location]) : 0;
+ readw(tp->mmio_addr + mii_2_8139_map[location]) : 0;
}
- mdio_sync (mdio_addr);
+ mdio_sync(mdio_addr);
/* Shift the read command bits out. */
for (i = 15; i >= 0; i--) {
int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
- writeb (MDIO_DIR | dataval, mdio_addr);
- mdio_delay ();
- writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
- mdio_delay ();
+ writeb(MDIO_DIR | dataval, mdio_addr);
+ mdio_delay();
+ writeb(MDIO_DIR | dataval | MDIO_CLK, mdio_addr);
+ mdio_delay();
}
/* Read the two transition, 16 data, and wire-idle bits. */
for (i = 19; i > 0; i--) {
- writeb (0, mdio_addr);
- mdio_delay ();
- retval =
- (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1
- : 0);
- writeb (MDIO_CLK, mdio_addr);
- mdio_delay ();
+ writeb(0, mdio_addr);
+ mdio_delay();
+ retval = ((retval << 1) | ((readb(mdio_addr) & MDIO_DATA_IN))
+ ? 1 : 0);
+ writeb(MDIO_CLK, mdio_addr);
+ mdio_delay();
}
- DPRINTK ("EXIT, returning %d\n", (retval >> 1) & 0xffff);
+ DPRINTK("EXIT, returning %d\n", (retval >> 1) & 0xffff);
return (retval >> 1) & 0xffff;
}
-static void mdio_write (struct net_device *dev, int phy_id, int location,
- int value)
+static void mdio_write(struct net_device *dev, int phy_id, int location,
+ int value)
{
struct netdrv_private *tp = netdev_priv(dev);
void *mdio_addr = tp->mmio_addr + Config4;
int mii_cmd =
- (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
+ (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
int i;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
if (phy_id > 31) { /* Really a 8139. Use internal registers. */
if (location < 8 && mii_2_8139_map[location]) {
- writew (value,
- tp->mmio_addr + mii_2_8139_map[location]);
- readw (tp->mmio_addr + mii_2_8139_map[location]);
+ writew(value,
+ tp->mmio_addr + mii_2_8139_map[location]);
+ readw(tp->mmio_addr + mii_2_8139_map[location]);
}
- DPRINTK ("EXIT after directly using 8139 internal regs\n");
+ DPRINTK("EXIT after directly using 8139 internal regs\n");
return;
}
- mdio_sync (mdio_addr);
+ mdio_sync(mdio_addr);
/* Shift the command bits out. */
for (i = 31; i >= 0; i--) {
int dataval =
- (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
- writeb (dataval, mdio_addr);
- mdio_delay ();
- writeb (dataval | MDIO_CLK, mdio_addr);
- mdio_delay ();
+ (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
+ writeb(dataval, mdio_addr);
+ mdio_delay();
+ writeb(dataval | MDIO_CLK, mdio_addr);
+ mdio_delay();
}
/* Clear out extra bits. */
for (i = 2; i > 0; i--) {
- writeb (0, mdio_addr);
- mdio_delay ();
- writeb (MDIO_CLK, mdio_addr);
- mdio_delay ();
+ writeb(0, mdio_addr);
+ mdio_delay();
+ writeb(MDIO_CLK, mdio_addr);
+ mdio_delay();
}
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
}
-static int netdrv_open (struct net_device *dev)
+static int netdrv_open(struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
int retval;
-#ifdef NETDRV_DEBUG
void *ioaddr = tp->mmio_addr;
-#endif
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- retval = request_irq (dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
+ retval = request_irq(dev->irq, netdrv_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
- DPRINTK ("EXIT, returning %d\n", retval);
+ DPRINTK("EXIT, returning %d\n", retval);
return retval;
}
@@ -1092,7 +1104,7 @@ static int netdrv_open (struct net_device *dev)
pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
tp->rx_ring, tp->rx_ring_dma);
- DPRINTK ("EXIT, returning -ENOMEM\n");
+ DPRINTK("EXIT, returning -ENOMEM\n");
return -ENOMEM;
}
@@ -1100,109 +1112,108 @@ static int netdrv_open (struct net_device *dev)
tp->full_duplex = tp->duplex_lock;
tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
- netdrv_init_ring (dev);
- netdrv_hw_start (dev);
+ netdrv_init_ring(dev);
+ netdrv_hw_start(dev);
- DPRINTK ("%s: netdrv_open() ioaddr %#lx IRQ %d"
- " GP Pins %2.2x %s-duplex.\n",
- dev->name, pci_resource_start (tp->pci_dev, 1),
- dev->irq, NETDRV_R8 (MediaStatus),
- tp->full_duplex ? "full" : "half");
+ netdev_dbg(dev, "ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
+ (unsigned long long)pci_resource_start(tp->pci_dev, 1),
+ dev->irq, NETDRV_R8(MediaStatus),
+ tp->full_duplex ? "full" : "half");
/* Set the timer to switch to check for link beat and perhaps switch
to an alternate media type. */
- init_timer (&tp->timer);
+ init_timer(&tp->timer);
tp->timer.expires = jiffies + 3 * HZ;
tp->timer.data = (unsigned long) dev;
tp->timer.function = &netdrv_timer;
- add_timer (&tp->timer);
+ add_timer(&tp->timer);
- DPRINTK ("EXIT, returning 0\n");
+ DPRINTK("EXIT, returning 0\n");
return 0;
}
/* Start the hardware at open or resume. */
-static void netdrv_hw_start (struct net_device *dev)
+static void netdrv_hw_start(struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
u32 i;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
/* Soft reset the chip. */
- NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) | CmdReset);
- udelay (100);
+ NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) | CmdReset);
+ udelay(100);
/* Check that the chip has finished the reset. */
for (i = 1000; i > 0; i--)
- if ((NETDRV_R8 (ChipCmd) & CmdReset) == 0)
+ if ((NETDRV_R8(ChipCmd) & CmdReset) == 0)
break;
/* Restore our idea of the MAC address. */
- NETDRV_W32_F (MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
- NETDRV_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ NETDRV_W32_F(MAC0 + 0, cpu_to_le32(*(u32 *)(dev->dev_addr + 0)));
+ NETDRV_W32_F(MAC0 + 4, cpu_to_le32(*(u32 *)(dev->dev_addr + 4)));
/* Must enable Tx/Rx before setting transfer thresholds! */
- NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) |
- CmdRxEnb | CmdTxEnb);
+ NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
+ CmdRxEnb | CmdTxEnb);
i = netdrv_rx_config |
- (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
- NETDRV_W32_F (RxConfig, i);
+ (NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ NETDRV_W32_F(RxConfig, i);
/* Check this value: the documentation for IFG contradicts ifself. */
- NETDRV_W32 (TxConfig, (TX_DMA_BURST << TxDMAShift));
+ NETDRV_W32(TxConfig, (TX_DMA_BURST << TxDMAShift));
/* unlock Config[01234] and BMCR register writes */
- NETDRV_W8_F (Cfg9346, Cfg9346_Unlock);
- udelay (10);
+ NETDRV_W8_F(Cfg9346, Cfg9346_Unlock);
+ udelay(10);
tp->cur_rx = 0;
/* Lock Config[01234] and BMCR register writes */
- NETDRV_W8_F (Cfg9346, Cfg9346_Lock);
- udelay (10);
+ NETDRV_W8_F(Cfg9346, Cfg9346_Lock);
+ udelay(10);
/* init Rx ring buffer DMA address */
- NETDRV_W32_F (RxBuf, tp->rx_ring_dma);
+ NETDRV_W32_F(RxBuf, tp->rx_ring_dma);
/* init Tx buffer DMA addresses */
for (i = 0; i < NUM_TX_DESC; i++)
- NETDRV_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
+ NETDRV_W32_F(TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
- NETDRV_W32_F (RxMissed, 0);
+ NETDRV_W32_F(RxMissed, 0);
- netdrv_set_rx_mode (dev);
+ netdrv_set_rx_mode(dev);
/* no early-rx interrupts */
- NETDRV_W16 (MultiIntr, NETDRV_R16 (MultiIntr) & MultiIntrClear);
+ NETDRV_W16(MultiIntr, NETDRV_R16(MultiIntr) & MultiIntrClear);
/* make sure RxTx has started */
- NETDRV_W8_F (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear) |
- CmdRxEnb | CmdTxEnb);
+ NETDRV_W8_F(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear) |
+ CmdRxEnb | CmdTxEnb);
/* Enable all known interrupts by setting the interrupt mask. */
- NETDRV_W16_F (IntrMask, netdrv_intr_mask);
+ NETDRV_W16_F(IntrMask, netdrv_intr_mask);
- netif_start_queue (dev);
+ netif_start_queue(dev);
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
}
/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
-static void netdrv_init_ring (struct net_device *dev)
+static void netdrv_init_ring(struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
int i;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
tp->cur_rx = 0;
- atomic_set (&tp->cur_tx, 0);
- atomic_set (&tp->dirty_tx, 0);
+ atomic_set(&tp->cur_tx, 0);
+ atomic_set(&tp->dirty_tx, 0);
for (i = 0; i < NUM_TX_DESC; i++) {
tp->tx_info[i].skb = NULL;
@@ -1210,11 +1221,11 @@ static void netdrv_init_ring (struct net_device *dev)
tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
}
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
}
-static void netdrv_timer (unsigned long data)
+static void netdrv_timer(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
struct netdrv_private *tp = netdev_priv(dev);
@@ -1222,58 +1233,54 @@ static void netdrv_timer (unsigned long data)
int next_tick = 60 * HZ;
int mii_lpa;
- mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
+ mii_lpa = mdio_read(dev, tp->phys[0], MII_LPA);
if (!tp->duplex_lock && mii_lpa != 0xffff) {
int duplex = ((mii_lpa & LPA_100FULL) ||
- (mii_lpa & 0x01C0) == 0x0040);
+ (mii_lpa & 0x01C0) == 0x0040);
if (tp->full_duplex != duplex) {
tp->full_duplex = duplex;
- printk (KERN_INFO
- "%s: Setting %s-duplex based on MII #%d link"
- " partner ability of %4.4x.\n", dev->name,
- tp->full_duplex ? "full" : "half",
- tp->phys[0], mii_lpa);
- NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
- NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20);
- NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+ netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
+ tp->full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
+ NETDRV_W8(Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
+ NETDRV_W8(Cfg9346, Cfg9346_Lock);
}
}
- DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
- dev->name, NETDRV_R16 (NWayLPAR));
- DPRINTK ("%s: Other registers are IntMask %4.4x IntStatus %4.4x"
- " RxStatus %4.4x.\n", dev->name,
- NETDRV_R16 (IntrMask),
- NETDRV_R16 (IntrStatus),
- NETDRV_R32 (RxEarlyStatus));
- DPRINTK ("%s: Chip config %2.2x %2.2x.\n",
- dev->name, NETDRV_R8 (Config0),
- NETDRV_R8 (Config1));
+ netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
+ NETDRV_R16(NWayLPAR));
+ netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x RxStatus %04lx\n",
+ NETDRV_R16(IntrMask),
+ NETDRV_R16(IntrStatus),
+ NETDRV_R32(RxEarlyStatus));
+ netdev_dbg(dev, "Chip config %02x %02x\n",
+ NETDRV_R8(Config0), NETDRV_R8(Config1));
tp->timer.expires = jiffies + next_tick;
- add_timer (&tp->timer);
+ add_timer(&tp->timer);
}
-static void netdrv_tx_clear (struct net_device *dev)
+static void netdrv_tx_clear(struct net_device *dev)
{
int i;
struct netdrv_private *tp = netdev_priv(dev);
- atomic_set (&tp->cur_tx, 0);
- atomic_set (&tp->dirty_tx, 0);
+ atomic_set(&tp->cur_tx, 0);
+ atomic_set(&tp->dirty_tx, 0);
/* Dump the unsent Tx packets. */
for (i = 0; i < NUM_TX_DESC; i++) {
struct ring_info *rp = &tp->tx_info[i];
if (rp->mapping != 0) {
- pci_unmap_single (tp->pci_dev, rp->mapping,
- rp->skb->len, PCI_DMA_TODEVICE);
+ pci_unmap_single(tp->pci_dev, rp->mapping,
+ rp->skb->len, PCI_DMA_TODEVICE);
rp->mapping = 0;
}
if (rp->skb) {
- dev_kfree_skb (rp->skb);
+ dev_kfree_skb(rp->skb);
rp->skb = NULL;
dev->stats.tx_dropped++;
}
@@ -1281,7 +1288,7 @@ static void netdrv_tx_clear (struct net_device *dev)
}
-static void netdrv_tx_timeout (struct net_device *dev)
+static void netdrv_tx_timeout(struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
@@ -1289,96 +1296,95 @@ static void netdrv_tx_timeout (struct net_device *dev)
u8 tmp8;
unsigned long flags;
- DPRINTK ("%s: Transmit timeout, status %2.2x %4.4x "
- "media %2.2x.\n", dev->name,
- NETDRV_R8 (ChipCmd),
- NETDRV_R16 (IntrStatus),
- NETDRV_R8 (MediaStatus));
+ netdev_dbg(dev, "Transmit timeout, status %02x %04x media %02x\n",
+ NETDRV_R8(ChipCmd),
+ NETDRV_R16(IntrStatus),
+ NETDRV_R8(MediaStatus));
/* disable Tx ASAP, if not already */
- tmp8 = NETDRV_R8 (ChipCmd);
+ tmp8 = NETDRV_R8(ChipCmd);
if (tmp8 & CmdTxEnb)
- NETDRV_W8 (ChipCmd, tmp8 & ~CmdTxEnb);
+ NETDRV_W8(ChipCmd, tmp8 & ~CmdTxEnb);
/* Disable interrupts by clearing the interrupt mask. */
- NETDRV_W16 (IntrMask, 0x0000);
+ NETDRV_W16(IntrMask, 0x0000);
/* Emit info to figure out what went wrong. */
- printk (KERN_DEBUG "%s: Tx queue start entry %d dirty entry %d.\n",
- dev->name, atomic_read (&tp->cur_tx),
- atomic_read (&tp->dirty_tx));
+ netdev_dbg(dev, "Tx queue start entry %d dirty entry %d\n",
+ atomic_read(&tp->cur_tx),
+ atomic_read(&tp->dirty_tx));
for (i = 0; i < NUM_TX_DESC; i++)
- printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8lx.%s\n",
- dev->name, i, NETDRV_R32 (TxStatus0 + (i * 4)),
- i == atomic_read (&tp->dirty_tx) % NUM_TX_DESC ?
- " (queue head)" : "");
+ netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
+ i, NETDRV_R32(TxStatus0 + (i * 4)),
+ i == atomic_read(&tp->dirty_tx) % NUM_TX_DESC ?
+ "(queue head)" : "");
/* Stop a shared interrupt from scavenging while we are. */
- spin_lock_irqsave (&tp->lock, flags);
+ spin_lock_irqsave(&tp->lock, flags);
- netdrv_tx_clear (dev);
+ netdrv_tx_clear(dev);
- spin_unlock_irqrestore (&tp->lock, flags);
+ spin_unlock_irqrestore(&tp->lock, flags);
/* ...and finally, reset everything */
- netdrv_hw_start (dev);
+ netdrv_hw_start(dev);
- netif_wake_queue (dev);
+ netif_wake_queue(dev);
}
-static int netdrv_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static int netdrv_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
int entry;
/* Calculate the next Tx descriptor entry. */
- entry = atomic_read (&tp->cur_tx) % NUM_TX_DESC;
+ entry = atomic_read(&tp->cur_tx) % NUM_TX_DESC;
- assert (tp->tx_info[entry].skb == NULL);
- assert (tp->tx_info[entry].mapping == 0);
+ assert(tp->tx_info[entry].skb == NULL);
+ assert(tp->tx_info[entry].mapping == 0);
tp->tx_info[entry].skb = skb;
/* tp->tx_info[entry].mapping = 0; */
skb_copy_from_linear_data(skb, tp->tx_buf[entry], skb->len);
/* Note: the chip doesn't have auto-pad! */
- NETDRV_W32 (TxStatus0 + (entry * sizeof(u32)),
- tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
+ NETDRV_W32(TxStatus0 + (entry * sizeof(u32)),
+ tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
dev->trans_start = jiffies;
- atomic_inc (&tp->cur_tx);
- if ((atomic_read (&tp->cur_tx) - atomic_read (&tp->dirty_tx)) >= NUM_TX_DESC)
- netif_stop_queue (dev);
+ atomic_inc(&tp->cur_tx);
+ if ((atomic_read(&tp->cur_tx) - atomic_read(&tp->dirty_tx)) >= NUM_TX_DESC)
+ netif_stop_queue(dev);
- DPRINTK ("%s: Queued Tx packet at %p size %u to slot %d.\n",
- dev->name, skb->data, skb->len, entry);
+ netdev_dbg(dev, "Queued Tx packet at %p size %u to slot %d\n",
+ skb->data, skb->len, entry);
return NETDEV_TX_OK;
}
-static void netdrv_tx_interrupt (struct net_device *dev,
- struct netdrv_private *tp,
- void *ioaddr)
+static void netdrv_tx_interrupt(struct net_device *dev,
+ struct netdrv_private *tp,
+ void *ioaddr)
{
int cur_tx, dirty_tx, tx_left;
- assert (dev != NULL);
- assert (tp != NULL);
- assert (ioaddr != NULL);
+ assert(dev != NULL);
+ assert(tp != NULL);
+ assert(ioaddr != NULL);
- dirty_tx = atomic_read (&tp->dirty_tx);
+ dirty_tx = atomic_read(&tp->dirty_tx);
- cur_tx = atomic_read (&tp->cur_tx);
+ cur_tx = atomic_read(&tp->cur_tx);
tx_left = cur_tx - dirty_tx;
while (tx_left > 0) {
int entry = dirty_tx % NUM_TX_DESC;
int txstatus;
- txstatus = NETDRV_R32 (TxStatus0 + (entry * sizeof (u32)));
+ txstatus = NETDRV_R32(TxStatus0 + (entry * sizeof(u32)));
if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
break; /* It still hasn't been Txed */
@@ -1386,12 +1392,12 @@ static void netdrv_tx_interrupt (struct net_device *dev,
/* Note: TxCarrierLost is always asserted at 100mbps. */
if (txstatus & (TxOutOfWindow | TxAborted)) {
/* There was an major error, log it. */
- DPRINTK ("%s: Transmit error, Tx status %8.8x.\n",
- dev->name, txstatus);
+ netdev_dbg(dev, "Transmit error, Tx status %#08x\n",
+ txstatus);
dev->stats.tx_errors++;
if (txstatus & TxAborted) {
dev->stats.tx_aborted_errors++;
- NETDRV_W32 (TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
+ NETDRV_W32(TxConfig, TxClearAbt | (TX_DMA_BURST << TxDMAShift));
}
if (txstatus & TxCarrierLost)
dev->stats.tx_carrier_errors++;
@@ -1417,48 +1423,45 @@ static void netdrv_tx_interrupt (struct net_device *dev,
PCI_DMA_TODEVICE);
tp->tx_info[entry].mapping = 0;
}
- dev_kfree_skb_irq (tp->tx_info[entry].skb);
+ dev_kfree_skb_irq(tp->tx_info[entry].skb);
tp->tx_info[entry].skb = NULL;
dirty_tx++;
if (dirty_tx < 0) { /* handle signed int overflow */
- atomic_sub (cur_tx, &tp->cur_tx); /* XXX racy? */
+ atomic_sub(cur_tx, &tp->cur_tx); /* XXX racy? */
dirty_tx = cur_tx - tx_left + 1;
}
- if (netif_queue_stopped (dev))
- netif_wake_queue (dev);
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
- cur_tx = atomic_read (&tp->cur_tx);
+ cur_tx = atomic_read(&tp->cur_tx);
tx_left = cur_tx - dirty_tx;
}
#ifndef NETDRV_NDEBUG
- if (atomic_read (&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
- printk (KERN_ERR
- "%s: Out-of-sync dirty pointer, %d vs. %d.\n",
- dev->name, dirty_tx, atomic_read (&tp->cur_tx));
+ if (atomic_read(&tp->cur_tx) - dirty_tx > NUM_TX_DESC) {
+ netdev_err(dev, "Out-of-sync dirty pointer, %d vs. %d\n",
+ dirty_tx, atomic_read(&tp->cur_tx));
dirty_tx += NUM_TX_DESC;
}
#endif /* NETDRV_NDEBUG */
- atomic_set (&tp->dirty_tx, dirty_tx);
+ atomic_set(&tp->dirty_tx, dirty_tx);
}
/* TODO: clean this up! Rx reset need not be this intensive */
-static void netdrv_rx_err (u32 rx_status, struct net_device *dev,
- struct netdrv_private *tp, void *ioaddr)
+static void netdrv_rx_err(u32 rx_status, struct net_device *dev,
+ struct netdrv_private *tp, void *ioaddr)
{
u8 tmp8;
int tmp_work = 1000;
- DPRINTK ("%s: Ethernet frame had errors, status %8.8x.\n",
- dev->name, rx_status);
- if (rx_status & RxTooLong) {
- DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
- dev->name, rx_status);
+ netdev_dbg(dev, "Ethernet frame had errors, status %08x\n", rx_status);
+ if (rx_status & RxTooLong)
+ netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
+ rx_status);
/* A.C.: The chip hangs here. */
- }
dev->stats.rx_errors++;
if (rx_status & (RxBadSymbol | RxBadAlign))
dev->stats.rx_frame_errors++;
@@ -1466,56 +1469,55 @@ static void netdrv_rx_err (u32 rx_status, struct net_device *dev,
dev->stats.rx_length_errors++;
if (rx_status & RxCRCErr)
dev->stats.rx_crc_errors++;
- /* Reset the receiver, based on RealTek recommendation. (Bug?) */
+ /* Reset the receiver, based on RealTek recommendation.(Bug?) */
tp->cur_rx = 0;
/* disable receive */
- tmp8 = NETDRV_R8 (ChipCmd) & ChipCmdClear;
- NETDRV_W8_F (ChipCmd, tmp8 | CmdTxEnb);
+ tmp8 = NETDRV_R8(ChipCmd) & ChipCmdClear;
+ NETDRV_W8_F(ChipCmd, tmp8 | CmdTxEnb);
/* A.C.: Reset the multicast list. */
- netdrv_set_rx_mode (dev);
+ netdrv_set_rx_mode(dev);
/* XXX potentially temporary hack to
* restart hung receiver */
while (--tmp_work > 0) {
- tmp8 = NETDRV_R8 (ChipCmd);
+ tmp8 = NETDRV_R8(ChipCmd);
if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
break;
- NETDRV_W8_F (ChipCmd,
- (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
+ NETDRV_W8_F(ChipCmd,
+ (tmp8 & ChipCmdClear) | CmdRxEnb | CmdTxEnb);
}
/* G.S.: Re-enable receiver */
/* XXX temporary hack to work around receiver hang */
- netdrv_set_rx_mode (dev);
+ netdrv_set_rx_mode(dev);
if (tmp_work <= 0)
- printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+ netdev_warn(dev, "tx/rx enable wait too long\n");
}
/* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the
field alignments and semantics. */
-static void netdrv_rx_interrupt (struct net_device *dev,
- struct netdrv_private *tp, void *ioaddr)
+static void netdrv_rx_interrupt(struct net_device *dev,
+ struct netdrv_private *tp, void *ioaddr)
{
unsigned char *rx_ring;
u16 cur_rx;
- assert (dev != NULL);
- assert (tp != NULL);
- assert (ioaddr != NULL);
+ assert(dev != NULL);
+ assert(tp != NULL);
+ assert(ioaddr != NULL);
rx_ring = tp->rx_ring;
cur_rx = tp->cur_rx;
- DPRINTK ("%s: In netdrv_rx(), current %4.4x BufAddr %4.4x,"
- " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
- NETDRV_R16 (RxBufAddr),
- NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd));
+ netdev_dbg(dev, "In netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ cur_rx, NETDRV_R16(RxBufAddr),
+ NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
- while ((NETDRV_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ while ((NETDRV_R8(ChipCmd) & RxBufEmpty) == 0) {
int ring_offset = cur_rx % RX_BUF_LEN;
u32 rx_status;
unsigned int rx_size;
@@ -1523,32 +1525,25 @@ static void netdrv_rx_interrupt (struct net_device *dev,
struct sk_buff *skb;
/* read size+status of next frame from DMA ring buffer */
- rx_status = le32_to_cpu (*(u32 *) (rx_ring + ring_offset));
+ rx_status = le32_to_cpu(*(u32 *)(rx_ring + ring_offset));
rx_size = rx_status >> 16;
pkt_size = rx_size - 4;
- DPRINTK ("%s: netdrv_rx() status %4.4x, size %4.4x,"
- " cur %4.4x.\n", dev->name, rx_status,
- rx_size, cur_rx);
+ netdev_dbg(dev, "netdrv_rx() status %04x, size %04x, cur %04x\n",
+ rx_status, rx_size, cur_rx);
#if defined(NETDRV_DEBUG) && (NETDRV_DEBUG > 2)
- {
- int i;
- DPRINTK ("%s: Frame contents ", dev->name);
- for (i = 0; i < 70; i++)
- printk (" %2.2x",
- rx_ring[ring_offset + i]);
- printk (".\n");
- }
+ print_hex_dump_bytes("Frame contents: ", HEX_DUMP_OFFSET,
+ &rx_ring[ring_offset], 70);
#endif
/* If Rx err or invalid rx_size/rx_status received
- * (which happens if we get lost in the ring),
+ *(which happens if we get lost in the ring),
* Rx process gets reset, so we abort any further
* Rx processing.
*/
if ((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
(!(rx_status & RxStatusOK))) {
- netdrv_rx_err (rx_status, dev, tp, ioaddr);
+ netdrv_rx_err(rx_status, dev, tp, ioaddr);
return;
}
@@ -1561,71 +1556,67 @@ static void netdrv_rx_interrupt (struct net_device *dev,
* drop packets here under memory pressure.
*/
- skb = dev_alloc_skb (pkt_size + 2);
+ skb = dev_alloc_skb(pkt_size + 2);
if (skb) {
- skb_reserve (skb, 2); /* 16 byte align the IP fields. */
+ skb_reserve(skb, 2); /* 16 byte align the IP fields. */
- skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
- skb_put (skb, pkt_size);
+ skb_copy_to_linear_data(skb, &rx_ring[ring_offset + 4], pkt_size);
+ skb_put(skb, pkt_size);
- skb->protocol = eth_type_trans (skb, dev);
- netif_rx (skb);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
} else {
- printk (KERN_WARNING
- "%s: Memory squeeze, dropping packet.\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
}
cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
- NETDRV_W16_F (RxBufPtr, cur_rx - 16);
+ NETDRV_W16_F(RxBufPtr, cur_rx - 16);
}
- DPRINTK ("%s: Done netdrv_rx(), current %4.4x BufAddr %4.4x,"
- " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
- NETDRV_R16 (RxBufAddr),
- NETDRV_R16 (RxBufPtr), NETDRV_R8 (ChipCmd));
+ netdev_dbg(dev, "Done netdrv_rx(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ cur_rx, NETDRV_R16(RxBufAddr),
+ NETDRV_R16(RxBufPtr), NETDRV_R8(ChipCmd));
tp->cur_rx = cur_rx;
}
-static void netdrv_weird_interrupt (struct net_device *dev,
- struct netdrv_private *tp,
- void *ioaddr,
- int status, int link_changed)
+static void netdrv_weird_interrupt(struct net_device *dev,
+ struct netdrv_private *tp,
+ void *ioaddr,
+ int status, int link_changed)
{
- printk (KERN_DEBUG "%s: Abnormal interrupt, status %8.8x.\n",
- dev->name, status);
+ netdev_printk(KERN_DEBUG, dev, "Abnormal interrupt, status %08x\n",
+ status);
- assert (dev != NULL);
- assert (tp != NULL);
- assert (ioaddr != NULL);
+ assert(dev != NULL);
+ assert(tp != NULL);
+ assert(ioaddr != NULL);
/* Update the error count. */
- dev->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
- NETDRV_W32 (RxMissed, 0);
+ dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
+ NETDRV_W32(RxMissed, 0);
if ((status & RxUnderrun) && link_changed &&
(tp->drv_flags & HAS_LNK_CHNG)) {
/* Really link-change on new chips. */
- int lpar = NETDRV_R16 (NWayLPAR);
+ int lpar = NETDRV_R16(NWayLPAR);
int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
- tp->duplex_lock);
+ tp->duplex_lock);
if (tp->full_duplex != duplex) {
tp->full_duplex = duplex;
- NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
- NETDRV_W8 (Config1, tp->full_duplex ? 0x60 : 0x20);
- NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+ NETDRV_W8(Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8(Config1, tp->full_duplex ? 0x60 : 0x20);
+ NETDRV_W8(Cfg9346, Cfg9346_Lock);
}
status &= ~RxUnderrun;
}
/* XXX along with netdrv_rx_err, are we double-counting errors? */
- if (status &
- (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
+ if (status & (RxUnderrun | RxOverflow | RxErr | RxFIFOOver))
dev->stats.rx_errors++;
if (status & (PCSTimeout))
@@ -1634,22 +1625,21 @@ static void netdrv_weird_interrupt (struct net_device *dev,
dev->stats.rx_fifo_errors++;
if (status & RxOverflow) {
dev->stats.rx_over_errors++;
- tp->cur_rx = NETDRV_R16 (RxBufAddr) % RX_BUF_LEN;
- NETDRV_W16_F (RxBufPtr, tp->cur_rx - 16);
+ tp->cur_rx = NETDRV_R16(RxBufAddr) % RX_BUF_LEN;
+ NETDRV_W16_F(RxBufPtr, tp->cur_rx - 16);
}
if (status & PCIErr) {
u16 pci_cmd_status;
- pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
+ pci_read_config_word(tp->pci_dev, PCI_STATUS, &pci_cmd_status);
- printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
- dev->name, pci_cmd_status);
+ netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
}
}
/* The interrupt handler does all of the Rx thread work and cleans up
after the Tx thread. */
-static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
+static irqreturn_t netdrv_interrupt(int irq, void *dev_instance)
{
struct net_device *dev = (struct net_device *) dev_instance;
struct netdrv_private *tp = netdev_priv(dev);
@@ -1658,22 +1648,21 @@ static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
int status = 0, link_changed = 0; /* avoid bogus "uninit" warning */
int handled = 0;
- spin_lock (&tp->lock);
+ spin_lock(&tp->lock);
do {
- status = NETDRV_R16 (IntrStatus);
+ status = NETDRV_R16(IntrStatus);
- /* h/w no longer present (hotplug?) or major error, bail */
+ /* h/w no longer present(hotplug?) or major error, bail */
if (status == 0xFFFF)
break;
handled = 1;
/* Acknowledge all of the current interrupt sources ASAP */
- NETDRV_W16_F (IntrStatus, status);
+ NETDRV_W16_F(IntrStatus, status);
- DPRINTK ("%s: interrupt status=%#4.4x new intstat=%#4.4x.\n",
- dev->name, status,
- NETDRV_R16 (IntrStatus));
+ netdev_dbg(dev, "interrupt status=%#04x new intstat=%#04x\n",
+ status, NETDRV_R16(IntrStatus));
if ((status &
(PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
@@ -1682,69 +1671,67 @@ static irqreturn_t netdrv_interrupt (int irq, void *dev_instance)
/* Check uncommon events with one test. */
if (status & (PCIErr | PCSTimeout | RxUnderrun | RxOverflow |
- RxFIFOOver | TxErr | RxErr))
- netdrv_weird_interrupt (dev, tp, ioaddr,
- status, link_changed);
+ RxFIFOOver | TxErr | RxErr))
+ netdrv_weird_interrupt(dev, tp, ioaddr,
+ status, link_changed);
if (status & (RxOK | RxUnderrun | RxOverflow | RxFIFOOver)) /* Rx interrupt */
- netdrv_rx_interrupt (dev, tp, ioaddr);
+ netdrv_rx_interrupt(dev, tp, ioaddr);
if (status & (TxOK | TxErr))
- netdrv_tx_interrupt (dev, tp, ioaddr);
+ netdrv_tx_interrupt(dev, tp, ioaddr);
boguscnt--;
} while (boguscnt > 0);
if (boguscnt <= 0) {
- printk (KERN_WARNING
- "%s: Too much work at interrupt, "
- "IntrStatus=0x%4.4x.\n", dev->name,
- status);
+ netdev_warn(dev, "Too much work at interrupt, IntrStatus=%#04x\n",
+ status);
/* Clear all interrupt sources. */
- NETDRV_W16 (IntrStatus, 0xffff);
+ NETDRV_W16(IntrStatus, 0xffff);
}
- spin_unlock (&tp->lock);
+ spin_unlock(&tp->lock);
- DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
- dev->name, NETDRV_R16 (IntrStatus));
+ netdev_dbg(dev, "exiting interrupt, intr_status=%#04x\n",
+ NETDRV_R16(IntrStatus));
return IRQ_RETVAL(handled);
}
-static int netdrv_close (struct net_device *dev)
+static int netdrv_close(struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
unsigned long flags;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- netif_stop_queue (dev);
+ netif_stop_queue(dev);
- DPRINTK ("%s: Shutting down ethercard, status was 0x%4.4x.\n",
- dev->name, NETDRV_R16 (IntrStatus));
+ netdev_dbg(dev, "Shutting down ethercard, status was %#04x\n",
+ NETDRV_R16(IntrStatus));
- del_timer_sync (&tp->timer);
+ del_timer_sync(&tp->timer);
- spin_lock_irqsave (&tp->lock, flags);
+ spin_lock_irqsave(&tp->lock, flags);
/* Stop the chip's Tx and Rx DMA processes. */
- NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear));
+ NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
/* Disable interrupts by clearing the interrupt mask. */
- NETDRV_W16 (IntrMask, 0x0000);
+ NETDRV_W16(IntrMask, 0x0000);
/* Update the error counts. */
- dev->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
- NETDRV_W32 (RxMissed, 0);
+ dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
+ NETDRV_W32(RxMissed, 0);
- spin_unlock_irqrestore (&tp->lock, flags);
+ spin_unlock_irqrestore(&tp->lock, flags);
- free_irq (dev->irq, dev);
+ free_irq(dev->irq, dev);
- netdrv_tx_clear (dev);
+ netdrv_tx_clear(dev);
pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN,
tp->rx_ring, tp->rx_ring_dma);
@@ -1754,23 +1741,23 @@ static int netdrv_close (struct net_device *dev)
tp->tx_bufs = NULL;
/* Green! Put the chip in low-power mode. */
- NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
- NETDRV_W8 (Config1, 0x03);
- NETDRV_W8 (Cfg9346, Cfg9346_Lock);
+ NETDRV_W8(Cfg9346, Cfg9346_Unlock);
+ NETDRV_W8(Config1, 0x03);
+ NETDRV_W8(Cfg9346, Cfg9346_Lock);
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
return 0;
}
-static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+static int netdrv_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct netdrv_private *tp = netdev_priv(dev);
struct mii_ioctl_data *data = if_mii(rq);
unsigned long flags;
int rc = 0;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
switch (cmd) {
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
@@ -1778,15 +1765,15 @@ static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
/* Fall Through */
case SIOCGMIIREG: /* Read MII PHY register. */
- spin_lock_irqsave (&tp->lock, flags);
- data->val_out = mdio_read (dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
- spin_unlock_irqrestore (&tp->lock, flags);
+ spin_lock_irqsave(&tp->lock, flags);
+ data->val_out = mdio_read(dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+ spin_unlock_irqrestore(&tp->lock, flags);
break;
case SIOCSMIIREG: /* Write MII PHY register. */
- spin_lock_irqsave (&tp->lock, flags);
- mdio_write (dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- spin_unlock_irqrestore (&tp->lock, flags);
+ spin_lock_irqsave(&tp->lock, flags);
+ mdio_write(dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_irqrestore(&tp->lock, flags);
break;
default:
@@ -1794,14 +1781,14 @@ static int netdrv_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
break;
}
- DPRINTK ("EXIT, returning %d\n", rc);
+ DPRINTK("EXIT, returning %d\n", rc);
return rc;
}
/* Set or clear the multicast filter for this adaptor.
This routine is not state sensitive and need not be SMP locked. */
-static void netdrv_set_rx_mode (struct net_device *dev)
+static void netdrv_set_rx_mode(struct net_device *dev)
{
struct netdrv_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
@@ -1809,16 +1796,16 @@ static void netdrv_set_rx_mode (struct net_device *dev)
int i, rx_mode;
u32 tmp;
- DPRINTK ("ENTER\n");
+ DPRINTK("ENTER\n");
- DPRINTK ("%s: netdrv_set_rx_mode(%4.4x) done -- Rx config %8.8x.\n",
- dev->name, dev->flags, NETDRV_R32 (RxConfig));
+ netdev_dbg(dev, "%s(%04x) done -- Rx config %08lx\n",
+ __func__, dev->flags, NETDRV_R32(RxConfig));
/* Note: do not reorder, GCC is clever about common statements. */
if (dev->flags & IFF_PROMISC) {
rx_mode =
- AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
- AcceptAllPhys;
+ AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+ AcceptAllPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
(dev->flags & IFF_ALLMULTI)) {
@@ -1838,66 +1825,66 @@ static void netdrv_set_rx_mode (struct net_device *dev)
}
/* if called from irq handler, lock already acquired */
- if (!in_irq ())
- spin_lock_irq (&tp->lock);
+ if (!in_irq())
+ spin_lock_irq(&tp->lock);
/* We can safely update without stopping the chip. */
tmp = netdrv_rx_config | rx_mode |
- (NETDRV_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
- NETDRV_W32_F (RxConfig, tmp);
- NETDRV_W32_F (MAR0 + 0, mc_filter[0]);
- NETDRV_W32_F (MAR0 + 4, mc_filter[1]);
+ (NETDRV_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask);
+ NETDRV_W32_F(RxConfig, tmp);
+ NETDRV_W32_F(MAR0 + 0, mc_filter[0]);
+ NETDRV_W32_F(MAR0 + 4, mc_filter[1]);
- if (!in_irq ())
- spin_unlock_irq (&tp->lock);
+ if (!in_irq())
+ spin_unlock_irq(&tp->lock);
- DPRINTK ("EXIT\n");
+ DPRINTK("EXIT\n");
}
#ifdef CONFIG_PM
-static int netdrv_suspend (struct pci_dev *pdev, pm_message_t state)
+static int netdrv_suspend(struct pci_dev *pdev, pm_message_t state)
{
- struct net_device *dev = pci_get_drvdata (pdev);
+ struct net_device *dev = pci_get_drvdata(pdev);
struct netdrv_private *tp = netdev_priv(dev);
void *ioaddr = tp->mmio_addr;
unsigned long flags;
if (!netif_running(dev))
return 0;
- netif_device_detach (dev);
+ netif_device_detach(dev);
- spin_lock_irqsave (&tp->lock, flags);
+ spin_lock_irqsave(&tp->lock, flags);
/* Disable interrupts, stop Tx and Rx. */
- NETDRV_W16 (IntrMask, 0x0000);
- NETDRV_W8 (ChipCmd, (NETDRV_R8 (ChipCmd) & ChipCmdClear));
+ NETDRV_W16(IntrMask, 0x0000);
+ NETDRV_W8(ChipCmd, (NETDRV_R8(ChipCmd) & ChipCmdClear));
/* Update the error counts. */
- dev->stats.rx_missed_errors += NETDRV_R32 (RxMissed);
- NETDRV_W32 (RxMissed, 0);
+ dev->stats.rx_missed_errors += NETDRV_R32(RxMissed);
+ NETDRV_W32(RxMissed, 0);
- spin_unlock_irqrestore (&tp->lock, flags);
+ spin_unlock_irqrestore(&tp->lock, flags);
- pci_save_state (pdev);
- pci_set_power_state (pdev, PCI_D3hot);
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
-static int netdrv_resume (struct pci_dev *pdev)
+static int netdrv_resume(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata (pdev);
+ struct net_device *dev = pci_get_drvdata(pdev);
/*struct netdrv_private *tp = netdev_priv(dev);*/
if (!netif_running(dev))
return 0;
- pci_set_power_state (pdev, PCI_D0);
- pci_restore_state (pdev);
- netif_device_attach (dev);
- netdrv_hw_start (dev);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ netif_device_attach(dev);
+ netdrv_hw_start(dev);
return 0;
}
@@ -1917,7 +1904,7 @@ static struct pci_driver netdrv_pci_driver = {
};
-static int __init netdrv_init_module (void)
+static int __init netdrv_init_module(void)
{
/* when a module, this is printed whether or not devices are found in probe */
#ifdef MODULE
@@ -1927,9 +1914,9 @@ static int __init netdrv_init_module (void)
}
-static void __exit netdrv_cleanup_module (void)
+static void __exit netdrv_cleanup_module(void)
{
- pci_unregister_driver (&netdrv_pci_driver);
+ pci_unregister_driver(&netdrv_pci_driver);
}
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Remove periods from formats
Coalesce long formats
Use __func__
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/cnic.c | 87 ++++++++++++++++++++++------------------------------
1 files changed, 37 insertions(+), 50 deletions(-)
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 4332b3a..6aecef9 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -10,6 +10,8 @@
* Modified and maintained by: Michael Chan <[email protected]>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
@@ -47,7 +49,6 @@
#include "cnic_defs.h"
#define DRV_MODULE_NAME "cnic"
-#define PFX DRV_MODULE_NAME ": "
static char version[] __devinitdata =
"Broadcom NetXtreme II CNIC Driver " DRV_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
@@ -409,14 +410,13 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
struct cnic_dev *dev;
if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
- printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
- ulp_type);
+ pr_err("%s: Bad type %d\n", __func__, ulp_type);
return -EINVAL;
}
mutex_lock(&cnic_lock);
if (cnic_ulp_tbl[ulp_type]) {
- printk(KERN_ERR PFX "cnic_register_driver: Type %d has already "
- "been registered\n", ulp_type);
+ pr_err("%s: Type %d has already been registered\n",
+ __func__, ulp_type);
mutex_unlock(&cnic_lock);
return -EBUSY;
}
@@ -455,15 +455,14 @@ int cnic_unregister_driver(int ulp_type)
int i = 0;
if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
- printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
- ulp_type);
+ pr_err("%s: Bad type %d\n", __func__, ulp_type);
return -EINVAL;
}
mutex_lock(&cnic_lock);
ulp_ops = cnic_ulp_tbl[ulp_type];
if (!ulp_ops) {
- printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
- "been registered\n", ulp_type);
+ pr_err("%s: Type %d has not been registered\n",
+ __func__, ulp_type);
goto out_unlock;
}
read_lock(&cnic_dev_lock);
@@ -471,8 +470,8 @@ int cnic_unregister_driver(int ulp_type)
struct cnic_local *cp = dev->cnic_priv;
if (rcu_dereference(cp->ulp_ops[ulp_type])) {
- printk(KERN_ERR PFX "cnic_unregister_driver: Type %d "
- "still has devices registered\n", ulp_type);
+ pr_err("%s: Type %d still has devices registered\n",
+ __func__, ulp_type);
read_unlock(&cnic_dev_lock);
goto out_unlock;
}
@@ -492,8 +491,7 @@ int cnic_unregister_driver(int ulp_type)
}
if (atomic_read(&ulp_ops->ref_count) != 0)
- printk(KERN_WARNING PFX "%s: Failed waiting for ref count to go"
- " to zero.\n", dev->netdev->name);
+ netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n");
return 0;
out_unlock:
@@ -511,20 +509,19 @@ static int cnic_register_device(struct cnic_dev *dev, int ulp_type,
struct cnic_ulp_ops *ulp_ops;
if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
- printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
- ulp_type);
+ pr_err("%s: Bad type %d\n", __func__, ulp_type);
return -EINVAL;
}
mutex_lock(&cnic_lock);
if (cnic_ulp_tbl[ulp_type] == NULL) {
- printk(KERN_ERR PFX "cnic_register_device: Driver with type %d "
- "has not been registered\n", ulp_type);
+ pr_err("%s: Driver with type %d has not been registered\n",
+ __func__, ulp_type);
mutex_unlock(&cnic_lock);
return -EAGAIN;
}
if (rcu_dereference(cp->ulp_ops[ulp_type])) {
- printk(KERN_ERR PFX "cnic_register_device: Type %d has already "
- "been registered to this device\n", ulp_type);
+ pr_err("%s: Type %d has already been registered to this device\n",
+ __func__, ulp_type);
mutex_unlock(&cnic_lock);
return -EBUSY;
}
@@ -552,8 +549,7 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
int i = 0;
if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
- printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
- ulp_type);
+ pr_err("%s: Bad type %d\n", __func__, ulp_type);
return -EINVAL;
}
mutex_lock(&cnic_lock);
@@ -561,8 +557,8 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
rcu_assign_pointer(cp->ulp_ops[ulp_type], NULL);
cnic_put(dev);
} else {
- printk(KERN_ERR PFX "cnic_unregister_device: device not "
- "registered to this ulp type %d\n", ulp_type);
+ pr_err("%s: device not registered to this ulp type %d\n",
+ __func__, ulp_type);
mutex_unlock(&cnic_lock);
return -EINVAL;
}
@@ -576,8 +572,7 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
i++;
}
if (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]))
- printk(KERN_WARNING PFX "%s: Failed waiting for ULP up call"
- " to complete.\n", dev->netdev->name);
+ netdev_warn(dev->netdev, "Failed waiting for ULP up call to complete\n");
return 0;
}
@@ -1865,8 +1860,7 @@ static int cnic_bnx2x_connect(struct cnic_dev *dev, struct kwqe *wqes[],
}
if (sizeof(*conn_buf) > CNIC_KWQ16_DATA_SIZE) {
- printk(KERN_ERR PFX "%s: conn_buf size too big\n",
- dev->netdev->name);
+ netdev_err(dev->netdev, "conn_buf size too big\n");
return -ENOMEM;
}
conn_buf = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
@@ -2026,13 +2020,13 @@ static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
break;
default:
ret = 0;
- printk(KERN_ERR PFX "%s: Unknown type of KWQE(0x%x)\n",
- dev->netdev->name, opcode);
+ netdev_err(dev->netdev, "Unknown type of KWQE(0x%x)\n",
+ opcode);
break;
}
if (ret < 0)
- printk(KERN_ERR PFX "%s: KWQE(0x%x) failed\n",
- dev->netdev->name, opcode);
+ netdev_err(dev->netdev, "KWQE(0x%x) failed\n",
+ opcode);
i += work;
}
return 0;
@@ -2074,8 +2068,8 @@ static void service_kcqes(struct cnic_dev *dev, int num_cqes)
else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
goto end;
else {
- printk(KERN_ERR PFX "%s: Unknown type of KCQE(0x%x)\n",
- dev->netdev->name, kcqe_op_flag);
+ netdev_err(dev->netdev, "Unknown type of KCQE(0x%x)\n",
+ kcqe_op_flag);
goto end;
}
@@ -3435,8 +3429,7 @@ static int cnic_init_bnx2_irq(struct cnic_dev *dev)
return 0;
failed:
- printk(KERN_ERR PFX "%s: " "KCQ index not resetting to 0.\n",
- dev->netdev->name);
+ netdev_err(dev->netdev, "KCQ index not resetting to 0\n");
return -EBUSY;
}
@@ -3758,8 +3751,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev)
err = cnic_init_bnx2_irq(dev);
if (err) {
- printk(KERN_ERR PFX "%s: cnic_init_irq failed\n",
- dev->netdev->name);
+ netdev_err(dev->netdev, "cnic_init_irq failed\n");
cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
return err;
@@ -4122,8 +4114,7 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
offsetof(struct cstorm_status_block_c,
index_values[HC_INDEX_C_ISCSI_EQ_CONS]));
if (eq_idx != 0) {
- printk(KERN_ERR PFX "%s: EQ cons index %x != 0\n",
- dev->netdev->name, eq_idx);
+ netdev_err(dev->netdev, "EQ cons index %x != 0\n", eq_idx);
return -EBUSY;
}
ret = cnic_init_bnx2x_irq(dev);
@@ -4208,8 +4199,7 @@ static int cnic_register_netdev(struct cnic_dev *dev)
err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
if (err)
- printk(KERN_ERR PFX "%s: register_cnic failed\n",
- dev->netdev->name);
+ netdev_err(dev->netdev, "register_cnic failed\n");
return err;
}
@@ -4243,8 +4233,7 @@ static int cnic_start_hw(struct cnic_dev *dev)
err = cp->alloc_resc(dev);
if (err) {
- printk(KERN_ERR PFX "%s: allocate resource failure\n",
- dev->netdev->name);
+ netdev_err(dev->netdev, "allocate resource failure\n");
goto err1;
}
@@ -4326,10 +4315,9 @@ static void cnic_free_dev(struct cnic_dev *dev)
i++;
}
if (atomic_read(&dev->ref_count) != 0)
- printk(KERN_ERR PFX "%s: Failed waiting for ref count to go"
- " to zero.\n", dev->netdev->name);
+ netdev_err(dev->netdev, "Failed waiting for ref count to go to zero\n");
- printk(KERN_INFO PFX "Removed CNIC device: %s\n", dev->netdev->name);
+ netdev_info(dev->netdev, "Removed CNIC device\n");
dev_put(dev->netdev);
kfree(dev);
}
@@ -4345,8 +4333,7 @@ static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
cdev = kzalloc(alloc_size , GFP_KERNEL);
if (cdev == NULL) {
- printk(KERN_ERR PFX "%s: allocate dev struct failure\n",
- dev->name);
+ netdev_err(dev, "allocate dev struct failure\n");
return NULL;
}
@@ -4364,7 +4351,7 @@ static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
spin_lock_init(&cp->cnic_ulp_lock);
- printk(KERN_INFO PFX "Added CNIC device: %s\n", dev->name);
+ netdev_info(dev, "Added CNIC device\n");
return cdev;
}
@@ -4605,7 +4592,7 @@ static int __init cnic_init(void)
{
int rc = 0;
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
rc = register_netdevice_notifier(&cnic_netdev_notifier);
if (rc) {
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Coalesce some printks
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/bnx2.c | 145 ++++++++++++++++++++++------------------------------
1 files changed, 61 insertions(+), 84 deletions(-)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5f0dda1..a6cc9d0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -9,6 +9,7 @@
* Written by: Michael Chan ([email protected])
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -57,7 +58,6 @@
#include "bnx2_fw.h"
#define DRV_MODULE_NAME "bnx2"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "2.0.8"
#define DRV_MODULE_RELDATE "Feb 15, 2010"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-5.0.0.j6.fw"
@@ -979,33 +979,27 @@ bnx2_report_link(struct bnx2 *bp)
{
if (bp->link_up) {
netif_carrier_on(bp->dev);
- printk(KERN_INFO PFX "%s NIC %s Link is Up, ", bp->dev->name,
- bnx2_xceiver_str(bp));
-
- printk("%d Mbps ", bp->line_speed);
-
- if (bp->duplex == DUPLEX_FULL)
- printk("full duplex");
- else
- printk("half duplex");
+ netdev_info(bp->dev, "NIC %s Link is Up, %d Mbps %s duplex",
+ bnx2_xceiver_str(bp),
+ bp->line_speed,
+ bp->duplex == DUPLEX_FULL ? "full" : "half");
if (bp->flow_ctrl) {
if (bp->flow_ctrl & FLOW_CTRL_RX) {
- printk(", receive ");
+ pr_cont(", receive ");
if (bp->flow_ctrl & FLOW_CTRL_TX)
- printk("& transmit ");
+ pr_cont("& transmit ");
}
else {
- printk(", transmit ");
+ pr_cont(", transmit ");
}
- printk("flow control ON");
+ pr_cont("flow control ON");
}
- printk("\n");
- }
- else {
+ pr_cont("\n");
+ } else {
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC %s Link is Down\n", bp->dev->name,
- bnx2_xceiver_str(bp));
+ netdev_err(bp->dev, "NIC %s Link is Down\n",
+ bnx2_xceiver_str(bp));
}
bnx2_report_fw_link(bp);
@@ -2482,8 +2476,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent)
/* If we timed out, inform the firmware that this is the case. */
if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) {
if (!silent)
- printk(KERN_ERR PFX "fw sync timeout, reset code = "
- "%x\n", msg_data);
+ pr_err("fw sync timeout, reset code = %x\n", msg_data);
msg_data &= ~BNX2_DRV_MSG_CODE;
msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT;
@@ -2599,8 +2592,7 @@ bnx2_alloc_bad_rbuf(struct bnx2 *bp)
good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL);
if (good_mbuf == NULL) {
- printk(KERN_ERR PFX "Failed to allocate memory in "
- "bnx2_alloc_bad_rbuf\n");
+ pr_err("Failed to allocate memory in %s\n", __func__);
return -ENOMEM;
}
@@ -3656,15 +3648,13 @@ bnx2_request_firmware(struct bnx2 *bp)
rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
- mips_fw_file);
+ pr_err("Can't load firmware file \"%s\"\n", mips_fw_file);
return rc;
}
rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n",
- rv2p_fw_file);
+ pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file);
return rc;
}
mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
@@ -3675,15 +3665,13 @@ bnx2_request_firmware(struct bnx2 *bp)
check_mips_fw_entry(bp->mips_firmware, &mips_fw->rxp) ||
check_mips_fw_entry(bp->mips_firmware, &mips_fw->tpat) ||
check_mips_fw_entry(bp->mips_firmware, &mips_fw->txp)) {
- printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
- mips_fw_file);
+ pr_err("Firmware file \"%s\" is invalid\n", mips_fw_file);
return -EINVAL;
}
if (bp->rv2p_firmware->size < sizeof(*rv2p_fw) ||
check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc1.rv2p, 8, true) ||
check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc2.rv2p, 8, true)) {
- printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
- rv2p_fw_file);
+ pr_err("Firmware file \"%s\" is invalid\n", rv2p_fw_file);
return -EINVAL;
}
@@ -4317,7 +4305,7 @@ bnx2_init_nvram(struct bnx2 *bp)
if (j == entry_count) {
bp->flash_info = NULL;
- printk(KERN_ALERT PFX "Unknown flash/EEPROM type.\n");
+ pr_alert("Unknown flash/EEPROM type\n");
return -ENODEV;
}
@@ -4737,7 +4725,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
- printk(KERN_ERR PFX "Chip reset did not complete\n");
+ pr_err("Chip reset did not complete\n");
return -EBUSY;
}
}
@@ -4745,7 +4733,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
/* Make sure byte swapping is properly configured. */
val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0);
if (val != 0x01020304) {
- printk(KERN_ERR PFX "Chip not in correct endian mode\n");
+ pr_err("Chip not in correct endian mode\n");
return -ENODEV;
}
@@ -5166,9 +5154,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num)
ring_prod = prod = rxr->rx_pg_prod;
for (i = 0; i < bp->rx_pg_ring_size; i++) {
if (bnx2_alloc_rx_page(bp, rxr, ring_prod) < 0) {
- printk(KERN_WARNING PFX "%s: init'ed rx page ring %d "
- "with %d/%d pages only\n",
- bp->dev->name, ring_num, i, bp->rx_pg_ring_size);
+ netdev_warn(bp->dev, "init'ed rx page ring %d with %d/%d pages only\n",
+ ring_num, i, bp->rx_pg_ring_size);
break;
}
prod = NEXT_RX_BD(prod);
@@ -5179,9 +5166,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num)
ring_prod = prod = rxr->rx_prod;
for (i = 0; i < bp->rx_ring_size; i++) {
if (bnx2_alloc_rx_skb(bp, rxr, ring_prod) < 0) {
- printk(KERN_WARNING PFX "%s: init'ed rx ring %d with "
- "%d/%d skbs only\n",
- bp->dev->name, ring_num, i, bp->rx_ring_size);
+ netdev_warn(bp->dev, "init'ed rx ring %d with %d/%d skbs only\n",
+ ring_num, i, bp->rx_ring_size);
break;
}
prod = NEXT_RX_BD(prod);
@@ -6239,11 +6225,7 @@ bnx2_open(struct net_device *dev)
* If MSI test fails, go back to INTx mode
*/
if (bnx2_test_intr(bp) != 0) {
- printk(KERN_WARNING PFX "%s: No interrupt was generated"
- " using MSI, switching to INTx mode. Please"
- " report this failure to the PCI maintainer"
- " and include system chipset information.\n",
- bp->dev->name);
+ netdev_warn(bp->dev, "No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.\n");
bnx2_disable_int(bp);
bnx2_free_irq(bp);
@@ -6263,9 +6245,9 @@ bnx2_open(struct net_device *dev)
}
}
if (bp->flags & BNX2_FLAG_USING_MSI)
- printk(KERN_INFO PFX "%s: using MSI\n", dev->name);
+ netdev_info(dev, "using MSI\n");
else if (bp->flags & BNX2_FLAG_USING_MSIX)
- printk(KERN_INFO PFX "%s: using MSIX\n", dev->name);
+ netdev_info(dev, "using MSIX\n");
netif_tx_start_all_queues(dev);
@@ -6304,20 +6286,18 @@ bnx2_dump_state(struct bnx2 *bp)
{
struct net_device *dev = bp->dev;
- printk(KERN_ERR PFX "%s DEBUG: intr_sem[%x]\n", dev->name,
- atomic_read(&bp->intr_sem));
- printk(KERN_ERR PFX "%s DEBUG: EMAC_TX_STATUS[%08x] "
- "RPM_MGMT_PKT_CTRL[%08x]\n", dev->name,
- REG_RD(bp, BNX2_EMAC_TX_STATUS),
- REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
- printk(KERN_ERR PFX "%s DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
- dev->name, bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
- bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
- printk(KERN_ERR PFX "%s DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
- dev->name, REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
+ netdev_err(dev, "DEBUG: intr_sem[%x]\n", atomic_read(&bp->intr_sem));
+ netdev_err(dev, "DEBUG: EMAC_TX_STATUS[%08x] RPM_MGMT_PKT_CTRL[%08x]\n",
+ REG_RD(bp, BNX2_EMAC_TX_STATUS),
+ REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
+ netdev_err(dev, "DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
+ bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
+ bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
+ netdev_err(dev, "DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
+ REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
if (bp->flags & BNX2_FLAG_USING_MSIX)
- printk(KERN_ERR PFX "%s DEBUG: PBA[%08x]\n", dev->name,
- REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
+ netdev_err(dev, "DEBUG: PBA[%08x]\n",
+ REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
}
static void
@@ -6381,8 +6361,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (unlikely(bnx2_tx_avail(bp, txr) <
(skb_shinfo(skb)->nr_frags + 1))) {
netif_tx_stop_queue(txq);
- printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n",
- dev->name);
+ netdev_err(dev, "BUG! Tx ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
@@ -7869,20 +7848,20 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
/* enable device (incl. PCI PM wakeup), and bus-mastering */
rc = pci_enable_device(pdev);
if (rc) {
- dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
+ dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
goto err_out;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
dev_err(&pdev->dev,
- "Cannot find PCI device base address, aborting.\n");
+ "Cannot find PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}
rc = pci_request_regions(pdev, DRV_MODULE_NAME);
if (rc) {
- dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
goto err_out_disable;
}
@@ -7892,7 +7871,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
dev_err(&pdev->dev,
- "Cannot find power management capability, aborting.\n");
+ "Cannot find power management capability, aborting\n");
rc = -EIO;
goto err_out_release;
}
@@ -7915,7 +7894,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->regview = ioremap_nocache(dev->base_addr, mem_len);
if (!bp->regview) {
- dev_err(&pdev->dev, "Cannot map register space, aborting.\n");
+ dev_err(&pdev->dev, "Cannot map register space, aborting\n");
rc = -ENOMEM;
goto err_out_release;
}
@@ -7935,7 +7914,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
if (pci_find_capability(pdev, PCI_CAP_ID_EXP) == 0) {
dev_err(&pdev->dev,
- "Cannot find PCIE capability, aborting.\n");
+ "Cannot find PCIE capability, aborting\n");
rc = -EIO;
goto err_out_unmap;
}
@@ -7946,7 +7925,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX);
if (bp->pcix_cap == 0) {
dev_err(&pdev->dev,
- "Cannot find PCIX capability, aborting.\n");
+ "Cannot find PCIX capability, aborting\n");
rc = -EIO;
goto err_out_unmap;
}
@@ -7975,11 +7954,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
rc = pci_set_consistent_dma_mask(pdev, persist_dma_mask);
if (rc) {
dev_err(&pdev->dev,
- "pci_set_consistent_dma_mask failed, aborting.\n");
+ "pci_set_consistent_dma_mask failed, aborting\n");
goto err_out_unmap;
}
} else if ((rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) {
- dev_err(&pdev->dev, "System does not support DMA, aborting.\n");
+ dev_err(&pdev->dev, "System does not support DMA, aborting\n");
goto err_out_unmap;
}
@@ -7996,7 +7975,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
!(bp->flags & BNX2_FLAG_PCIX)) {
dev_err(&pdev->dev,
- "5706 A1 can only be used in a PCIX bus, aborting.\n");
+ "5706 A1 can only be used in a PCIX bus, aborting\n");
goto err_out_unmap;
}
@@ -8019,7 +7998,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
BNX2_DEV_INFO_SIGNATURE_MAGIC) {
- dev_err(&pdev->dev, "Firmware not running, aborting.\n");
+ dev_err(&pdev->dev, "Firmware not running, aborting\n");
rc = -ENODEV;
goto err_out_unmap;
}
@@ -8292,7 +8271,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
char str[40];
if (version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
/* dev zeroed in init_etherdev */
dev = alloc_etherdev_mq(sizeof(*bp), TX_MAX_RINGS);
@@ -8342,15 +8321,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
goto error;
}
- printk(KERN_INFO "%s: %s (%c%d) %s found at mem %lx, "
- "IRQ %d, node addr %pM\n",
- dev->name,
- board_info[ent->driver_data].name,
- ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
- ((CHIP_ID(bp) & 0x0ff0) >> 4),
- bnx2_bus_string(bp, str),
- dev->base_addr,
- bp->pdev->irq, dev->dev_addr);
+ netdev_info(dev, "%s (%c%d) %s found at mem %lx, IRQ %d, node addr %pM\n",
+ board_info[ent->driver_data].name,
+ ((CHIP_ID(bp) & 0xf000) >> 12) + 'A',
+ ((CHIP_ID(bp) & 0x0ff0) >> 4),
+ bnx2_bus_string(bp, str),
+ dev->base_addr,
+ bp->pdev->irq, dev->dev_addr);
return 0;
@@ -8485,7 +8462,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
rtnl_lock();
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev,
- "Cannot re-enable PCI device after reset.\n");
+ "Cannot re-enable PCI device after reset\n");
rtnl_unlock();
return PCI_ERS_RESULT_DISCONNECT;
}
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/cassini.c | 361 +++++++++++++++++++++----------------------------
1 files changed, 151 insertions(+), 210 deletions(-)
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index ad47e51..adecd88 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -66,6 +66,7 @@
* by default, the selective clear mask is set up to process rx packets.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
@@ -143,7 +144,6 @@
#undef RX_COUNT_BUFFERS /* define to calculate RX buffer stats */
#define DRV_MODULE_NAME "cassini"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "1.6"
#define DRV_MODULE_RELDATE "21 May 2008"
@@ -649,9 +649,8 @@ static cas_page_t *cas_page_dequeue(struct cas *cp)
cas_spare_recover(cp, GFP_ATOMIC);
spin_lock(&cp->rx_spare_lock);
if (list_empty(&cp->rx_spare_list)) {
- if (netif_msg_rx_err(cp))
- printk(KERN_ERR "%s: no spare buffers "
- "available.\n", cp->dev->name);
+ netif_err(cp, rx_err, cp->dev,
+ "no spare buffers available\n");
spin_unlock(&cp->rx_spare_lock);
return NULL;
}
@@ -728,12 +727,10 @@ static void cas_begin_auto_negotiation(struct cas *cp, struct ethtool_cmd *ep)
#endif
start_aneg:
if (cp->lstate == link_up) {
- printk(KERN_INFO "%s: PCS link down.\n",
- cp->dev->name);
+ netdev_info(cp->dev, "PCS link down\n");
} else {
if (changed) {
- printk(KERN_INFO "%s: link configuration changed\n",
- cp->dev->name);
+ netdev_info(cp->dev, "link configuration changed\n");
}
}
cp->lstate = link_down;
@@ -826,12 +823,12 @@ static int cas_saturn_firmware_init(struct cas *cp)
err = request_firmware(&fw, fw_name, &cp->pdev->dev);
if (err) {
- printk(KERN_ERR "cassini: Failed to load firmware \"%s\"\n",
+ pr_err("Failed to load firmware \"%s\"\n",
fw_name);
return err;
}
if (fw->size < 2) {
- printk(KERN_ERR "cassini: bogus length %zu in \"%s\"\n",
+ pr_err("bogus length %zu in \"%s\"\n",
fw->size, fw_name);
err = -EINVAL;
goto out;
@@ -841,7 +838,7 @@ static int cas_saturn_firmware_init(struct cas *cp)
cp->fw_data = vmalloc(cp->fw_size);
if (!cp->fw_data) {
err = -ENOMEM;
- printk(KERN_ERR "cassini: \"%s\" Failed %d\n", fw_name, err);
+ pr_err("\"%s\" Failed %d\n", fw_name, err);
goto out;
}
memcpy(cp->fw_data, &fw->data[2], cp->fw_size);
@@ -986,9 +983,8 @@ static void cas_phy_init(struct cas *cp)
break;
}
if (limit <= 0)
- printk(KERN_WARNING "%s: PCS reset bit would not "
- "clear [%08x].\n", cp->dev->name,
- readl(cp->regs + REG_PCS_STATE_MACHINE));
+ netdev_warn(cp->dev, "PCS reset bit would not clear [%08x]\n",
+ readl(cp->regs + REG_PCS_STATE_MACHINE));
/* Make sure PCS is disabled while changing advertisement
* configuration.
@@ -1030,11 +1026,8 @@ static int cas_pcs_link_check(struct cas *cp)
*/
if ((stat & (PCS_MII_STATUS_AUTONEG_COMP |
PCS_MII_STATUS_REMOTE_FAULT)) ==
- (PCS_MII_STATUS_AUTONEG_COMP | PCS_MII_STATUS_REMOTE_FAULT)) {
- if (netif_msg_link(cp))
- printk(KERN_INFO "%s: PCS RemoteFault\n",
- cp->dev->name);
- }
+ (PCS_MII_STATUS_AUTONEG_COMP | PCS_MII_STATUS_REMOTE_FAULT))
+ netif_info(cp, link, cp->dev, "PCS RemoteFault\n");
/* work around link detection issue by querying the PCS state
* machine directly.
@@ -1081,10 +1074,8 @@ static int cas_pcs_link_check(struct cas *cp)
cp->link_transition = LINK_TRANSITION_ON_FAILURE;
}
netif_carrier_off(cp->dev);
- if (cp->opened && netif_msg_link(cp)) {
- printk(KERN_INFO "%s: PCS link down.\n",
- cp->dev->name);
- }
+ if (cp->opened)
+ netif_info(cp, link, cp->dev, "PCS link down\n");
/* Cassini only: if you force a mode, there can be
* sync problems on link down. to fix that, the following
@@ -1139,9 +1130,8 @@ static int cas_txmac_interrupt(struct net_device *dev,
if (!txmac_stat)
return 0;
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: txmac interrupt, txmac_stat: 0x%x\n",
- cp->dev->name, txmac_stat);
+ netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+ "txmac interrupt, txmac_stat: 0x%x\n", txmac_stat);
/* Defer timer expiration is quite normal,
* don't even log the event.
@@ -1152,14 +1142,12 @@ static int cas_txmac_interrupt(struct net_device *dev,
spin_lock(&cp->stat_lock[0]);
if (txmac_stat & MAC_TX_UNDERRUN) {
- printk(KERN_ERR "%s: TX MAC xmit underrun.\n",
- dev->name);
+ netdev_err(dev, "TX MAC xmit underrun\n");
cp->net_stats[0].tx_fifo_errors++;
}
if (txmac_stat & MAC_TX_MAX_PACKET_ERR) {
- printk(KERN_ERR "%s: TX MAC max packet size error.\n",
- dev->name);
+ netdev_err(dev, "TX MAC max packet size error\n");
cp->net_stats[0].tx_errors++;
}
@@ -1487,8 +1475,7 @@ static int cas_rxmac_reset(struct cas *cp)
udelay(10);
}
if (limit == STOP_TRIES) {
- printk(KERN_ERR "%s: RX MAC will not disable, resetting whole "
- "chip.\n", dev->name);
+ netdev_err(dev, "RX MAC will not disable, resetting whole chip\n");
return 1;
}
@@ -1500,8 +1487,7 @@ static int cas_rxmac_reset(struct cas *cp)
udelay(10);
}
if (limit == STOP_TRIES) {
- printk(KERN_ERR "%s: RX DMA will not disable, resetting whole "
- "chip.\n", dev->name);
+ netdev_err(dev, "RX DMA will not disable, resetting whole chip\n");
return 1;
}
@@ -1515,8 +1501,7 @@ static int cas_rxmac_reset(struct cas *cp)
udelay(10);
}
if (limit == STOP_TRIES) {
- printk(KERN_ERR "%s: RX reset command will not execute, "
- "resetting whole chip.\n", dev->name);
+ netdev_err(dev, "RX reset command will not execute, resetting whole chip\n");
return 1;
}
@@ -1545,9 +1530,7 @@ static int cas_rxmac_interrupt(struct net_device *dev, struct cas *cp,
if (!stat)
return 0;
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: rxmac interrupt, stat: 0x%x\n",
- cp->dev->name, stat);
+ netif_dbg(cp, intr, cp->dev, "rxmac interrupt, stat: 0x%x\n", stat);
/* these are all rollovers */
spin_lock(&cp->stat_lock[0]);
@@ -1580,9 +1563,8 @@ static int cas_mac_interrupt(struct net_device *dev, struct cas *cp,
if (!stat)
return 0;
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: mac interrupt, stat: 0x%x\n",
- cp->dev->name, stat);
+ netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+ "mac interrupt, stat: 0x%x\n", stat);
/* This interrupt is just for pause frame and pause
* tracking. It is useful for diagnostics and debug
@@ -1605,9 +1587,7 @@ static inline int cas_mdio_link_not_up(struct cas *cp)
switch (cp->lstate) {
case link_force_ret:
- if (netif_msg_link(cp))
- printk(KERN_INFO "%s: Autoneg failed again, keeping"
- " forced mode\n", cp->dev->name);
+ netif_info(cp, link, cp->dev, "Autoneg failed again, keeping forced mode\n");
cas_phy_write(cp, MII_BMCR, cp->link_fcntl);
cp->timer_ticks = 5;
cp->lstate = link_force_ok;
@@ -1675,9 +1655,9 @@ static int cas_mii_link_check(struct cas *cp, const u16 bmsr)
cas_mif_poll(cp, 0);
cp->link_fcntl = cas_phy_read(cp, MII_BMCR);
cp->timer_ticks = 5;
- if (cp->opened && netif_msg_link(cp))
- printk(KERN_INFO "%s: Got link after fallback, retrying"
- " autoneg once...\n", cp->dev->name);
+ if (cp->opened)
+ netif_info(cp, link, cp->dev,
+ "Got link after fallback, retrying autoneg once...\n");
cas_phy_write(cp, MII_BMCR,
cp->link_fcntl | BMCR_ANENABLE |
BMCR_ANRESTART);
@@ -1704,9 +1684,8 @@ static int cas_mii_link_check(struct cas *cp, const u16 bmsr)
cp->link_transition = LINK_TRANSITION_LINK_DOWN;
netif_carrier_off(cp->dev);
- if (cp->opened && netif_msg_link(cp))
- printk(KERN_INFO "%s: Link down\n",
- cp->dev->name);
+ if (cp->opened)
+ netif_info(cp, link, cp->dev, "Link down\n");
restart = 1;
} else if (++cp->timer_ticks > 10)
@@ -1737,23 +1716,23 @@ static int cas_pci_interrupt(struct net_device *dev, struct cas *cp,
if (!stat)
return 0;
- printk(KERN_ERR "%s: PCI error [%04x:%04x] ", dev->name, stat,
- readl(cp->regs + REG_BIM_DIAG));
+ netdev_err(dev, "PCI error [%04x:%04x]",
+ stat, readl(cp->regs + REG_BIM_DIAG));
/* cassini+ has this reserved */
if ((stat & PCI_ERR_BADACK) &&
((cp->cas_flags & CAS_FLAG_REG_PLUS) == 0))
- printk("<No ACK64# during ABS64 cycle> ");
+ pr_cont(" <No ACK64# during ABS64 cycle>");
if (stat & PCI_ERR_DTRTO)
- printk("<Delayed transaction timeout> ");
+ pr_cont(" <Delayed transaction timeout>");
if (stat & PCI_ERR_OTHER)
- printk("<other> ");
+ pr_cont(" <other>");
if (stat & PCI_ERR_BIM_DMA_WRITE)
- printk("<BIM DMA 0 write req> ");
+ pr_cont(" <BIM DMA 0 write req>");
if (stat & PCI_ERR_BIM_DMA_READ)
- printk("<BIM DMA 0 read req> ");
- printk("\n");
+ pr_cont(" <BIM DMA 0 read req>");
+ pr_cont("\n");
if (stat & PCI_ERR_OTHER) {
u16 cfg;
@@ -1762,25 +1741,19 @@ static int cas_pci_interrupt(struct net_device *dev, struct cas *cp,
* true cause.
*/
pci_read_config_word(cp->pdev, PCI_STATUS, &cfg);
- printk(KERN_ERR "%s: Read PCI cfg space status [%04x]\n",
- dev->name, cfg);
+ netdev_err(dev, "Read PCI cfg space status [%04x]\n", cfg);
if (cfg & PCI_STATUS_PARITY)
- printk(KERN_ERR "%s: PCI parity error detected.\n",
- dev->name);
+ netdev_err(dev, "PCI parity error detected\n");
if (cfg & PCI_STATUS_SIG_TARGET_ABORT)
- printk(KERN_ERR "%s: PCI target abort.\n",
- dev->name);
+ netdev_err(dev, "PCI target abort\n");
if (cfg & PCI_STATUS_REC_TARGET_ABORT)
- printk(KERN_ERR "%s: PCI master acks target abort.\n",
- dev->name);
+ netdev_err(dev, "PCI master acks target abort\n");
if (cfg & PCI_STATUS_REC_MASTER_ABORT)
- printk(KERN_ERR "%s: PCI master abort.\n", dev->name);
+ netdev_err(dev, "PCI master abort\n");
if (cfg & PCI_STATUS_SIG_SYSTEM_ERROR)
- printk(KERN_ERR "%s: PCI system error SERR#.\n",
- dev->name);
+ netdev_err(dev, "PCI system error SERR#\n");
if (cfg & PCI_STATUS_DETECTED_PARITY)
- printk(KERN_ERR "%s: PCI parity error.\n",
- dev->name);
+ netdev_err(dev, "PCI parity error\n");
/* Write the error bits back to clear them. */
cfg &= (PCI_STATUS_PARITY |
@@ -1806,9 +1779,8 @@ static int cas_abnormal_irq(struct net_device *dev, struct cas *cp,
{
if (status & INTR_RX_TAG_ERROR) {
/* corrupt RX tag framing */
- if (netif_msg_rx_err(cp))
- printk(KERN_DEBUG "%s: corrupt rx tag framing\n",
- cp->dev->name);
+ netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+ "corrupt rx tag framing\n");
spin_lock(&cp->stat_lock[0]);
cp->net_stats[0].rx_errors++;
spin_unlock(&cp->stat_lock[0]);
@@ -1817,9 +1789,8 @@ static int cas_abnormal_irq(struct net_device *dev, struct cas *cp,
if (status & INTR_RX_LEN_MISMATCH) {
/* length mismatch. */
- if (netif_msg_rx_err(cp))
- printk(KERN_DEBUG "%s: length mismatch for rx frame\n",
- cp->dev->name);
+ netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+ "length mismatch for rx frame\n");
spin_lock(&cp->stat_lock[0]);
cp->net_stats[0].rx_errors++;
spin_unlock(&cp->stat_lock[0]);
@@ -1861,12 +1832,11 @@ do_reset:
#if 1
atomic_inc(&cp->reset_task_pending);
atomic_inc(&cp->reset_task_pending_all);
- printk(KERN_ERR "%s:reset called in cas_abnormal_irq [0x%x]\n",
- dev->name, status);
+ netdev_err(dev, "reset called in cas_abnormal_irq [0x%x]\n", status);
schedule_work(&cp->reset_task);
#else
atomic_set(&cp->reset_task_pending, CAS_RESET_ALL);
- printk(KERN_ERR "reset called in cas_abnormal_irq\n");
+ netdev_err(dev, "reset called in cas_abnormal_irq\n");
schedule_work(&cp->reset_task);
#endif
return 1;
@@ -1920,9 +1890,8 @@ static inline void cas_tx_ringN(struct cas *cp, int ring, int limit)
if (count < 0)
break;
- if (netif_msg_tx_done(cp))
- printk(KERN_DEBUG "%s: tx[%d] done, slot %d\n",
- cp->dev->name, ring, entry);
+ netif_printk(cp, tx_done, KERN_DEBUG, cp->dev,
+ "tx[%d] done, slot %d\n", ring, entry);
skbs[entry] = NULL;
cp->tx_tiny_use[ring][entry].nbufs = 0;
@@ -1969,9 +1938,9 @@ static void cas_tx(struct net_device *dev, struct cas *cp,
#ifdef USE_TX_COMPWB
u64 compwb = le64_to_cpu(cp->init_block->tx_compwb);
#endif
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: tx interrupt, status: 0x%x, %llx\n",
- cp->dev->name, status, (unsigned long long)compwb);
+ netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+ "tx interrupt, status: 0x%x, %llx\n",
+ status, (unsigned long long)compwb);
/* process all the rings */
for (ring = 0; ring < N_TX_RINGS; ring++) {
#ifdef USE_TX_COMPWB
@@ -2050,10 +2019,8 @@ static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc,
hlen = min(cp->page_size - off, dlen);
if (hlen < 0) {
- if (netif_msg_rx_err(cp)) {
- printk(KERN_DEBUG "%s: rx page overflow: "
- "%d\n", cp->dev->name, hlen);
- }
+ netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+ "rx page overflow: %d\n", hlen);
dev_kfree_skb_irq(skb);
return -1;
}
@@ -2130,10 +2097,8 @@ static int cas_rx_process_pkt(struct cas *cp, struct cas_rx_comp *rxc,
off = CAS_VAL(RX_COMP1_DATA_OFF, words[0]) + swivel;
hlen = min(cp->page_size - off, dlen);
if (hlen < 0) {
- if (netif_msg_rx_err(cp)) {
- printk(KERN_DEBUG "%s: rx page overflow: "
- "%d\n", cp->dev->name, hlen);
- }
+ netif_printk(cp, rx_err, KERN_DEBUG, cp->dev,
+ "rx page overflow: %d\n", hlen);
dev_kfree_skb_irq(skb);
return -1;
}
@@ -2265,9 +2230,8 @@ static int cas_post_rxds_ringN(struct cas *cp, int ring, int num)
entry = cp->rx_old[ring];
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: rxd[%d] interrupt, done: %d\n",
- cp->dev->name, ring, entry);
+ netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+ "rxd[%d] interrupt, done: %d\n", ring, entry);
cluster = -1;
count = entry & 0x3;
@@ -2337,11 +2301,10 @@ static int cas_rx_ringN(struct cas *cp, int ring, int budget)
int entry, drops;
int npackets = 0;
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: rx[%d] interrupt, done: %d/%d\n",
- cp->dev->name, ring,
- readl(cp->regs + REG_RX_COMP_HEAD),
- cp->rx_new[ring]);
+ netif_printk(cp, intr, KERN_DEBUG, cp->dev,
+ "rx[%d] interrupt, done: %d/%d\n",
+ ring,
+ readl(cp->regs + REG_RX_COMP_HEAD), cp->rx_new[ring]);
entry = cp->rx_new[ring];
drops = 0;
@@ -2442,8 +2405,7 @@ static int cas_rx_ringN(struct cas *cp, int ring, int budget)
cp->rx_new[ring] = entry;
if (drops)
- printk(KERN_INFO "%s: Memory squeeze, deferring packet.\n",
- cp->dev->name);
+ netdev_info(cp->dev, "Memory squeeze, deferring packet\n");
return npackets;
}
@@ -2457,10 +2419,9 @@ static void cas_post_rxcs_ringN(struct net_device *dev,
last = cp->rx_cur[ring];
entry = cp->rx_new[ring];
- if (netif_msg_intr(cp))
- printk(KERN_DEBUG "%s: rxc[%d] interrupt, done: %d/%d\n",
- dev->name, ring, readl(cp->regs + REG_RX_COMP_HEAD),
- entry);
+ netif_printk(cp, intr, KERN_DEBUG, dev,
+ "rxc[%d] interrupt, done: %d/%d\n",
+ ring, readl(cp->regs + REG_RX_COMP_HEAD), entry);
/* zero and re-mark descriptors */
while (last != entry) {
@@ -2729,42 +2690,38 @@ static void cas_tx_timeout(struct net_device *dev)
{
struct cas *cp = netdev_priv(dev);
- printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
+ netdev_err(dev, "transmit timed out, resetting\n");
if (!cp->hw_running) {
- printk("%s: hrm.. hw not running!\n", dev->name);
+ netdev_err(dev, "hrm.. hw not running!\n");
return;
}
- printk(KERN_ERR "%s: MIF_STATE[%08x]\n",
- dev->name, readl(cp->regs + REG_MIF_STATE_MACHINE));
-
- printk(KERN_ERR "%s: MAC_STATE[%08x]\n",
- dev->name, readl(cp->regs + REG_MAC_STATE_MACHINE));
-
- printk(KERN_ERR "%s: TX_STATE[%08x:%08x:%08x] "
- "FIFO[%08x:%08x:%08x] SM1[%08x] SM2[%08x]\n",
- dev->name,
- readl(cp->regs + REG_TX_CFG),
- readl(cp->regs + REG_MAC_TX_STATUS),
- readl(cp->regs + REG_MAC_TX_CFG),
- readl(cp->regs + REG_TX_FIFO_PKT_CNT),
- readl(cp->regs + REG_TX_FIFO_WRITE_PTR),
- readl(cp->regs + REG_TX_FIFO_READ_PTR),
- readl(cp->regs + REG_TX_SM_1),
- readl(cp->regs + REG_TX_SM_2));
-
- printk(KERN_ERR "%s: RX_STATE[%08x:%08x:%08x]\n",
- dev->name,
- readl(cp->regs + REG_RX_CFG),
- readl(cp->regs + REG_MAC_RX_STATUS),
- readl(cp->regs + REG_MAC_RX_CFG));
-
- printk(KERN_ERR "%s: HP_STATE[%08x:%08x:%08x:%08x]\n",
- dev->name,
- readl(cp->regs + REG_HP_STATE_MACHINE),
- readl(cp->regs + REG_HP_STATUS0),
- readl(cp->regs + REG_HP_STATUS1),
- readl(cp->regs + REG_HP_STATUS2));
+ netdev_err(dev, "MIF_STATE[%08x]\n",
+ readl(cp->regs + REG_MIF_STATE_MACHINE));
+
+ netdev_err(dev, "MAC_STATE[%08x]\n",
+ readl(cp->regs + REG_MAC_STATE_MACHINE));
+
+ netdev_err(dev, "TX_STATE[%08x:%08x:%08x] FIFO[%08x:%08x:%08x] SM1[%08x] SM2[%08x]\n",
+ readl(cp->regs + REG_TX_CFG),
+ readl(cp->regs + REG_MAC_TX_STATUS),
+ readl(cp->regs + REG_MAC_TX_CFG),
+ readl(cp->regs + REG_TX_FIFO_PKT_CNT),
+ readl(cp->regs + REG_TX_FIFO_WRITE_PTR),
+ readl(cp->regs + REG_TX_FIFO_READ_PTR),
+ readl(cp->regs + REG_TX_SM_1),
+ readl(cp->regs + REG_TX_SM_2));
+
+ netdev_err(dev, "RX_STATE[%08x:%08x:%08x]\n",
+ readl(cp->regs + REG_RX_CFG),
+ readl(cp->regs + REG_MAC_RX_STATUS),
+ readl(cp->regs + REG_MAC_RX_CFG));
+
+ netdev_err(dev, "HP_STATE[%08x:%08x:%08x:%08x]\n",
+ readl(cp->regs + REG_HP_STATE_MACHINE),
+ readl(cp->regs + REG_HP_STATUS0),
+ readl(cp->regs + REG_HP_STATUS1),
+ readl(cp->regs + REG_HP_STATUS2));
#if 1
atomic_inc(&cp->reset_task_pending);
@@ -2830,8 +2787,7 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
CAS_TABORT(cp)*(skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&cp->tx_lock[ring], flags);
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
return 1;
}
@@ -2908,11 +2864,9 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
if (TX_BUFFS_AVAIL(cp, ring) <= CAS_TABORT(cp)*(MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
- if (netif_msg_tx_queued(cp))
- printk(KERN_DEBUG "%s: tx[%d] queued, slot %d, skblen %d, "
- "avail %d\n",
- dev->name, ring, entry, skb->len,
- TX_BUFFS_AVAIL(cp, ring));
+ netif_printk(cp, tx_queued, KERN_DEBUG, dev,
+ "tx[%d] queued, slot %d, skblen %d, avail %d\n",
+ ring, entry, skb->len, TX_BUFFS_AVAIL(cp, ring));
writel(entry, cp->regs + REG_TX_KICKN(ring));
spin_unlock_irqrestore(&cp->tx_lock[ring], flags);
return 0;
@@ -3100,10 +3054,10 @@ static void cas_mac_reset(struct cas *cp)
if (readl(cp->regs + REG_MAC_TX_RESET) |
readl(cp->regs + REG_MAC_RX_RESET))
- printk(KERN_ERR "%s: mac tx[%d]/rx[%d] reset failed [%08x]\n",
- cp->dev->name, readl(cp->regs + REG_MAC_TX_RESET),
- readl(cp->regs + REG_MAC_RX_RESET),
- readl(cp->regs + REG_MAC_STATE_MACHINE));
+ netdev_err(cp->dev, "mac tx[%d]/rx[%d] reset failed [%08x]\n",
+ readl(cp->regs + REG_MAC_TX_RESET),
+ readl(cp->regs + REG_MAC_RX_RESET),
+ readl(cp->regs + REG_MAC_STATE_MACHINE));
}
@@ -3423,7 +3377,7 @@ use_random_mac_addr:
goto done;
/* Sun MAC prefix then 3 random bytes. */
- printk(PFX "MAC address not found in ROM VPD\n");
+ pr_info("MAC address not found in ROM VPD\n");
dev_addr[0] = 0x08;
dev_addr[1] = 0x00;
dev_addr[2] = 0x20;
@@ -3484,7 +3438,7 @@ static int cas_check_invariants(struct cas *cp)
__free_pages(page, CAS_JUMBO_PAGE_SHIFT - PAGE_SHIFT);
cp->page_order = CAS_JUMBO_PAGE_SHIFT - PAGE_SHIFT;
} else {
- printk(PFX "MTU limited to %d bytes\n", CAS_MAX_MTU);
+ printk("MTU limited to %d bytes\n", CAS_MAX_MTU);
}
}
#endif
@@ -3529,7 +3483,7 @@ static int cas_check_invariants(struct cas *cp)
}
}
}
- printk(KERN_ERR PFX "MII phy did not respond [%08x]\n",
+ pr_err("MII phy did not respond [%08x]\n",
readl(cp->regs + REG_MIF_STATE_MACHINE));
return -1;
@@ -3574,21 +3528,19 @@ static inline void cas_start_dma(struct cas *cp)
val = readl(cp->regs + REG_MAC_RX_CFG);
if ((val & MAC_RX_CFG_EN)) {
if (txfailed) {
- printk(KERN_ERR
- "%s: enabling mac failed [tx:%08x:%08x].\n",
- cp->dev->name,
- readl(cp->regs + REG_MIF_STATE_MACHINE),
- readl(cp->regs + REG_MAC_STATE_MACHINE));
+ netdev_err(cp->dev,
+ "enabling mac failed [tx:%08x:%08x]\n",
+ readl(cp->regs + REG_MIF_STATE_MACHINE),
+ readl(cp->regs + REG_MAC_STATE_MACHINE));
}
goto enable_rx_done;
}
udelay(10);
}
- printk(KERN_ERR "%s: enabling mac failed [%s:%08x:%08x].\n",
- cp->dev->name,
- (txfailed? "tx,rx":"rx"),
- readl(cp->regs + REG_MIF_STATE_MACHINE),
- readl(cp->regs + REG_MAC_STATE_MACHINE));
+ netdev_err(cp->dev, "enabling mac failed [%s:%08x:%08x]\n",
+ (txfailed ? "tx,rx" : "rx"),
+ readl(cp->regs + REG_MIF_STATE_MACHINE),
+ readl(cp->regs + REG_MAC_STATE_MACHINE));
enable_rx_done:
cas_unmask_intr(cp); /* enable interrupts */
@@ -3690,9 +3642,8 @@ static void cas_set_link_modes(struct cas *cp)
}
}
- if (netif_msg_link(cp))
- printk(KERN_INFO "%s: Link up at %d Mbps, %s-duplex.\n",
- cp->dev->name, speed, (full_duplex ? "full" : "half"));
+ netif_info(cp, link, cp->dev, "Link up at %d Mbps, %s-duplex\n",
+ speed, full_duplex ? "full" : "half");
val = MAC_XIF_TX_MII_OUTPUT_EN | MAC_XIF_LINK_LED;
if (CAS_PHY_MII(cp->phy_type)) {
@@ -3762,18 +3713,14 @@ static void cas_set_link_modes(struct cas *cp)
if (netif_msg_link(cp)) {
if (pause & 0x01) {
- printk(KERN_INFO "%s: Pause is enabled "
- "(rxfifo: %d off: %d on: %d)\n",
- cp->dev->name,
- cp->rx_fifo_size,
- cp->rx_pause_off,
- cp->rx_pause_on);
+ netdev_info(cp->dev, "Pause is enabled (rxfifo: %d off: %d on: %d)\n",
+ cp->rx_fifo_size,
+ cp->rx_pause_off,
+ cp->rx_pause_on);
} else if (pause & 0x10) {
- printk(KERN_INFO "%s: TX pause enabled\n",
- cp->dev->name);
+ netdev_info(cp->dev, "TX pause enabled\n");
} else {
- printk(KERN_INFO "%s: Pause is disabled\n",
- cp->dev->name);
+ netdev_info(cp->dev, "Pause is disabled\n");
}
}
@@ -3849,7 +3796,7 @@ static void cas_global_reset(struct cas *cp, int blkflag)
goto done;
udelay(10);
}
- printk(KERN_ERR "%s: sw reset failed.\n", cp->dev->name);
+ netdev_err(cp->dev, "sw reset failed\n");
done:
/* enable various BIM interrupts */
@@ -3955,7 +3902,7 @@ static int cas_change_mtu(struct net_device *dev, int new_mtu)
#else
atomic_set(&cp->reset_task_pending, (cp->phy_type & CAS_PHY_SERDES) ?
CAS_RESET_ALL : CAS_RESET_MTU);
- printk(KERN_ERR "reset called in cas_change_mtu\n");
+ pr_err("reset called in cas_change_mtu\n");
schedule_work(&cp->reset_task);
#endif
@@ -4237,10 +4184,8 @@ static void cas_link_timer(unsigned long data)
if (((tlm == 0x5) || (tlm == 0x3)) &&
(CAS_VAL(MAC_SM_ENCAP_SM, val) == 0)) {
- if (netif_msg_tx_err(cp))
- printk(KERN_DEBUG "%s: tx err: "
- "MAC_STATE[%08x]\n",
- cp->dev->name, val);
+ netif_printk(cp, tx_err, KERN_DEBUG, cp->dev,
+ "tx err: MAC_STATE[%08x]\n", val);
reset = 1;
goto done;
}
@@ -4249,10 +4194,9 @@ static void cas_link_timer(unsigned long data)
wptr = readl(cp->regs + REG_TX_FIFO_WRITE_PTR);
rptr = readl(cp->regs + REG_TX_FIFO_READ_PTR);
if ((val == 0) && (wptr != rptr)) {
- if (netif_msg_tx_err(cp))
- printk(KERN_DEBUG "%s: tx err: "
- "TX_FIFO[%08x:%08x:%08x]\n",
- cp->dev->name, val, wptr, rptr);
+ netif_printk(cp, tx_err, KERN_DEBUG, cp->dev,
+ "tx err: TX_FIFO[%08x:%08x:%08x]\n",
+ val, wptr, rptr);
reset = 1;
}
@@ -4268,7 +4212,7 @@ done:
schedule_work(&cp->reset_task);
#else
atomic_set(&cp->reset_task_pending, CAS_RESET_ALL);
- printk(KERN_ERR "reset called in cas_link_timer\n");
+ pr_err("reset called in cas_link_timer\n");
schedule_work(&cp->reset_task);
#endif
}
@@ -4361,8 +4305,7 @@ static int cas_open(struct net_device *dev)
*/
if (request_irq(cp->pdev->irq, cas_interrupt,
IRQF_SHARED, dev->name, (void *) dev)) {
- printk(KERN_ERR "%s: failed to request irq !\n",
- cp->dev->name);
+ netdev_err(cp->dev, "failed to request irq !\n");
err = -EAGAIN;
goto err_spare;
}
@@ -5002,24 +4945,24 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
u8 orig_cacheline_size = 0, cas_cacheline_size = 0;
if (cas_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
err = pci_enable_device(pdev);
if (err) {
- dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n");
+ dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n");
return err;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "Cannot find proper PCI device "
- "base address, aborting.\n");
+ "base address, aborting\n");
err = -ENODEV;
goto err_out_disable_pdev;
}
dev = alloc_etherdev(sizeof(*cp));
if (!dev) {
- dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n");
+ dev_err(&pdev->dev, "Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto err_out_disable_pdev;
}
@@ -5027,7 +4970,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
err = pci_request_regions(pdev, dev->name);
if (err) {
- dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n");
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
goto err_out_free_netdev;
}
pci_set_master(pdev);
@@ -5041,8 +4984,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
pci_cmd |= PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
if (pci_try_set_mwi(pdev))
- printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
- pci_name(pdev));
+ pr_warning("Could not enable MWI for %s\n", pci_name(pdev));
cas_program_bridge(pdev);
@@ -5085,7 +5027,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "No usable DMA configuration, "
- "aborting.\n");
+ "aborting\n");
goto err_out_free_res;
}
pci_using_dac = 0;
@@ -5144,7 +5086,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
/* give us access to cassini registers */
cp->regs = pci_iomap(pdev, 0, casreg_len);
if (!cp->regs) {
- dev_err(&pdev->dev, "Cannot map device registers, aborting.\n");
+ dev_err(&pdev->dev, "Cannot map device registers, aborting\n");
goto err_out_free_res;
}
cp->casreg_len = casreg_len;
@@ -5163,7 +5105,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
pci_alloc_consistent(pdev, sizeof(struct cas_init_block),
&cp->block_dvma);
if (!cp->init_block) {
- dev_err(&pdev->dev, "Cannot allocate init block, aborting.\n");
+ dev_err(&pdev->dev, "Cannot allocate init block, aborting\n");
goto err_out_iounmap;
}
@@ -5197,18 +5139,17 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
dev->features |= NETIF_F_HIGHDMA;
if (register_netdev(dev)) {
- dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
+ dev_err(&pdev->dev, "Cannot register net device, aborting\n");
goto err_out_free_consistent;
}
i = readl(cp->regs + REG_BIM_CFG);
- printk(KERN_INFO "%s: Sun Cassini%s (%sbit/%sMHz PCI/%s) "
- "Ethernet[%d] %pM\n", dev->name,
- (cp->cas_flags & CAS_FLAG_REG_PLUS) ? "+" : "",
- (i & BIM_CFG_32BIT) ? "32" : "64",
- (i & BIM_CFG_66MHZ) ? "66" : "33",
- (cp->phy_type == CAS_PHY_SERDES) ? "Fi" : "Cu", pdev->irq,
- dev->dev_addr);
+ netdev_info(dev, "Sun Cassini%s (%sbit/%sMHz PCI/%s) Ethernet[%d] %pM\n",
+ (cp->cas_flags & CAS_FLAG_REG_PLUS) ? "+" : "",
+ (i & BIM_CFG_32BIT) ? "32" : "64",
+ (i & BIM_CFG_66MHZ) ? "66" : "33",
+ (cp->phy_type == CAS_PHY_SERDES) ? "Fi" : "Cu", pdev->irq,
+ dev->dev_addr);
pci_set_drvdata(pdev, dev);
cp->hw_running = 1;
@@ -5322,7 +5263,7 @@ static int cas_resume(struct pci_dev *pdev)
struct net_device *dev = pci_get_drvdata(pdev);
struct cas *cp = netdev_priv(dev);
- printk(KERN_INFO "%s: resuming\n", dev->name);
+ netdev_info(dev, "resuming\n");
mutex_lock(&cp->pm_mutex);
cas_hard_reset(cp);
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/skge.c | 50 +++++++++++++++++++++-----------------------------
1 files changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index ffa55df..8aa24c5 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -23,6 +23,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -46,7 +48,6 @@
#define DRV_NAME "skge"
#define DRV_VERSION "1.13"
-#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
#define DEFAULT_RX_RING_SIZE 512
@@ -1129,8 +1130,7 @@ static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg)
{
u16 v = 0;
if (__xm_phy_read(hw, port, reg, &v))
- printk(KERN_WARNING PFX "%s: phy read timed out\n",
- hw->dev[port]->name);
+ pr_warning("%s: phy read timed out\n", hw->dev[port]->name);
return v;
}
@@ -1252,8 +1252,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
lpa = xm_phy_read(hw, port, PHY_XMAC_AUNE_LP);
if (lpa & PHY_B_AN_RF) {
- printk(KERN_NOTICE PFX "%s: remote fault\n",
- dev->name);
+ netdev_notice(dev, "remote fault\n");
return;
}
@@ -1268,8 +1267,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
skge->duplex = DUPLEX_HALF;
break;
default:
- printk(KERN_NOTICE PFX "%s: duplex mismatch\n",
- dev->name);
+ netdev_notice(dev, "duplex mismatch\n");
return;
}
@@ -1461,8 +1459,7 @@ static int xm_check_link(struct net_device *dev)
lpa = xm_phy_read(hw, port, PHY_XMAC_AUNE_LP);
if (lpa & PHY_B_AN_RF) {
- printk(KERN_NOTICE PFX "%s: remote fault\n",
- dev->name);
+ netdev_notice(dev, "remote fault\n");
return 0;
}
@@ -1477,8 +1474,7 @@ static int xm_check_link(struct net_device *dev)
skge->duplex = DUPLEX_HALF;
break;
default:
- printk(KERN_NOTICE PFX "%s: duplex mismatch\n",
- dev->name);
+ netdev_notice(dev, "duplex mismatch\n");
return 0;
}
@@ -1566,7 +1562,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
udelay(1);
}
- printk(KERN_WARNING PFX "%s: genesis reset failed\n", dev->name);
+ netdev_warn(dev, "genesis reset failed\n");
reset_ok:
/* Unreset the XMAC. */
@@ -1898,7 +1894,7 @@ static inline void bcom_phy_intr(struct skge_port *skge)
"phy interrupt status 0x%x\n", isrc);
if (isrc & PHY_B_IS_PSE)
- printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n",
+ pr_err("%s: uncorrectable pair swap error\n",
hw->dev[port]->name);
/* Workaround BCom Errata:
@@ -1931,8 +1927,7 @@ static int gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val)
return 0;
}
- printk(KERN_WARNING PFX "%s: phy write timeout\n",
- hw->dev[port]->name);
+ pr_warning("%s: phy write timeout\n", hw->dev[port]->name);
return -EIO;
}
@@ -1960,8 +1955,7 @@ static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg)
{
u16 v = 0;
if (__gm_phy_read(hw, port, reg, &v))
- printk(KERN_WARNING PFX "%s: phy read timeout\n",
- hw->dev[port]->name);
+ pr_warning("%s: phy read timeout\n", hw->dev[port]->name);
return v;
}
@@ -2434,8 +2428,7 @@ static void yukon_phy_intr(struct skge_port *skge)
}
return;
failed:
- printk(KERN_ERR PFX "%s: autonegotiation failed (%s)\n",
- skge->netdev->name, reason);
+ pr_err("%s: autonegotiation failed (%s)\n", skge->netdev->name, reason);
/* XXX restart autonegotiation? */
}
@@ -2824,7 +2817,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
smp_wmb();
if (skge_avail(&skge->tx_ring) <= TX_LOW_WATER) {
- pr_debug("%s: transmit queue full\n", dev->name);
+ netdev_dbg(dev, "transmit queue full\n");
netif_stop_queue(dev);
}
@@ -3724,7 +3717,7 @@ static int skge_device_event(struct notifier_block *unused,
if (d)
skge->debugfs = d;
else {
- pr_info(PFX "%s: rename failed\n", dev->name);
+ netdev_info(dev, "rename failed\n");
debugfs_remove(skge->debugfs);
}
}
@@ -3742,8 +3735,7 @@ static int skge_device_event(struct notifier_block *unused,
skge_debug, dev,
&skge_debug_fops);
if (!d || IS_ERR(d))
- pr_info(PFX "%s: debugfs create failed\n",
- dev->name);
+ netdev_info(dev, "debugfs create failed\n");
else
skge->debugfs = d;
break;
@@ -3764,7 +3756,7 @@ static __init void skge_debug_init(void)
ent = debugfs_create_dir("skge", NULL);
if (!ent || IS_ERR(ent)) {
- pr_info(PFX "debugfs create directory failed\n");
+ pr_info("debugfs create directory failed\n");
return;
}
@@ -3945,9 +3937,10 @@ static int __devinit skge_probe(struct pci_dev *pdev,
if (err)
goto err_out_iounmap;
- printk(KERN_INFO PFX DRV_VERSION " addr 0x%llx irq %d chip %s rev %d\n",
- (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
- skge_board_name(hw), hw->chip_rev);
+ pr_info("%s addr 0x%llx irq %d chip %s rev %d\n",
+ DRV_VERSION,
+ (unsigned long long)pci_resource_start(pdev, 0), pdev->irq,
+ skge_board_name(hw), hw->chip_rev);
dev = skge_devinit(hw, 0, using_dac);
if (!dev)
@@ -4104,8 +4097,7 @@ static int skge_resume(struct pci_dev *pdev)
err = skge_up(dev);
if (err) {
- printk(KERN_ERR PFX "%s: could not up: %d\n",
- dev->name, err);
+ netdev_err(dev, "could not up: %d\n", err);
dev_close(dev);
goto out;
}
--
1.7.0.14.g7e948
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Coalesce long formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/bnx2x.h | 49 +++++++-----
drivers/net/bnx2x_link.c | 21 ++----
drivers/net/bnx2x_main.c | 185 ++++++++++++++++++++-------------------------
3 files changed, 117 insertions(+), 138 deletions(-)
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 602ab86..9f64f79 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -44,7 +44,6 @@
/* error/debug prints */
#define DRV_MODULE_NAME "bnx2x"
-#define PFX DRV_MODULE_NAME ": "
/* for messages that are currently off */
#define BNX2X_MSG_OFF 0
@@ -58,30 +57,40 @@
#define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */
/* regular debug print */
-#define DP(__mask, __fmt, __args...) do { \
- if (bp->msglevel & (__mask)) \
- printk(DP_LEVEL "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", ##__args); \
- } while (0)
+#define DP(__mask, __fmt, __args...) \
+do { \
+ if (bp->msg_enable & (__mask)) \
+ printk(DP_LEVEL "[%s:%d(%s)]" __fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__args); \
+} while (0)
/* errors debug print */
-#define BNX2X_DBG_ERR(__fmt, __args...) do { \
- if (bp->msglevel & NETIF_MSG_PROBE) \
- printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", ##__args); \
- } while (0)
+#define BNX2X_DBG_ERR(__fmt, __args...) \
+do { \
+ if (netif_msg_probe(bp)) \
+ pr_err("[%s:%d(%s)]" __fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__args); \
+} while (0)
/* for errors (never masked) */
-#define BNX2X_ERR(__fmt, __args...) do { \
- printk(KERN_ERR "[%s:%d(%s)]" __fmt, __func__, __LINE__, \
- bp->dev ? (bp->dev->name) : "?", ##__args); \
- } while (0)
+#define BNX2X_ERR(__fmt, __args...) \
+do { \
+ pr_err("[%s:%d(%s)]" __fmt, \
+ __func__, __LINE__, \
+ bp->dev ? (bp->dev->name) : "?", \
+ ##__args); \
+} while (0)
/* before we have a dev->name use dev_info() */
-#define BNX2X_DEV_INFO(__fmt, __args...) do { \
- if (bp->msglevel & NETIF_MSG_PROBE) \
- dev_info(&bp->pdev->dev, __fmt, ##__args); \
- } while (0)
+#define BNX2X_DEV_INFO(__fmt, __args...) \
+do { \
+ if (netif_msg_probe(bp)) \
+ dev_info(&bp->pdev->dev, __fmt, ##__args); \
+} while (0)
#ifdef BNX2X_STOP_ON_ERROR
@@ -882,7 +891,7 @@ struct bnx2x {
/* End of fields used in the performance code paths */
int panic;
- int msglevel;
+ int msg_enable;
u32 flags;
#define PCIX_FLAG 1
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index cf57789..32e79c3 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -14,6 +14,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pci.h>
@@ -2987,11 +2989,8 @@ static u8 bnx2x_verify_sfp_module(struct link_params *params)
else
vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0';
- printk(KERN_INFO PFX "Warning: "
- "Unqualified SFP+ module "
- "detected on %s, Port %d from %s part number %s\n"
- , bp->dev->name, params->port,
- vendor_name, vendor_pn);
+ netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected, Port %d from %s part number %s\n",
+ params->port, vendor_name, vendor_pn);
return -EINVAL;
}
@@ -4846,16 +4845,8 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
" has been detected on "
"port %d\n",
params->port);
- printk(KERN_ERR PFX "Error: Power"
- " fault on %s Port %d has"
- " been detected and the"
- " power to that SFP+ module"
- " has been removed to prevent"
- " failure of the card. Please"
- " remove the SFP+ module and"
- " restart the system to clear"
- " this error.\n"
- , bp->dev->name, params->port);
+ netdev_err(bp->dev, "Error: Power fault on Port %d has been detected and the power to that SFP+ module has been removed to prevent failure of the card. Please remove the SFP+ module and restart the system to clear this error.\n",
+ params->port);
/*
* Disable all RX_ALARMs except for
* mod_abs
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 6d85590..e01675c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -514,24 +514,24 @@ static void bnx2x_fw_dump(struct bnx2x *bp)
mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104);
mark = ((mark + 0x3) & ~0x3);
- printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark);
+ pr_err("begin fw dump (mark 0x%x)\n", mark);
- printk(KERN_ERR PFX);
+ pr_err("");
for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
offset + 4*word));
data[8] = 0x0;
- printk(KERN_CONT "%s", (char *)data);
+ pr_cont("%s", (char *)data);
}
for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH +
offset + 4*word));
data[8] = 0x0;
- printk(KERN_CONT "%s", (char *)data);
+ pr_cont("%s", (char *)data);
}
- printk(KERN_ERR PFX "end of fw dump\n");
+ pr_err("end of fw dump\n");
}
static void bnx2x_panic_dump(struct bnx2x *bp)
@@ -2136,7 +2136,7 @@ static void bnx2x_link_report(struct bnx2x *bp)
{
if (bp->flags & MF_FUNC_DIS) {
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ netdev_err(bp->dev, "NIC Link is Down\n");
return;
}
@@ -2145,7 +2145,7 @@ static void bnx2x_link_report(struct bnx2x *bp)
if (bp->state == BNX2X_STATE_OPEN)
netif_carrier_on(bp->dev);
- printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
+ netdev_info(bp->dev, "NIC Link is Up, ");
line_speed = bp->link_vars.line_speed;
if (IS_E1HMF(bp)) {
@@ -2157,29 +2157,29 @@ static void bnx2x_link_report(struct bnx2x *bp)
if (vn_max_rate < line_speed)
line_speed = vn_max_rate;
}
- printk("%d Mbps ", line_speed);
+ pr_cont("%d Mbps ", line_speed);
if (bp->link_vars.duplex == DUPLEX_FULL)
- printk("full duplex");
+ pr_cont("full duplex");
else
- printk("half duplex");
+ pr_cont("half duplex");
if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
- printk(", receive ");
+ pr_cont(", receive ");
if (bp->link_vars.flow_ctrl &
BNX2X_FLOW_CTRL_TX)
- printk("& transmit ");
+ pr_cont("& transmit ");
} else {
- printk(", transmit ");
+ pr_cont(", transmit ");
}
- printk("flow control ON");
+ pr_cont("flow control ON");
}
- printk("\n");
+ pr_cont("\n");
} else { /* link_down */
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ netdev_err(bp->dev, "NIC Link is Down\n");
}
}
@@ -2898,10 +2898,8 @@ static inline void bnx2x_fan_failure(struct bnx2x *bp)
bp->link_params.ext_phy_config);
/* log the failure */
- printk(KERN_ERR PFX "Fan Failure on Network Controller %s has caused"
- " the driver to shutdown the card to prevent permanent"
- " damage. Please contact Dell Support for assistance\n",
- bp->dev->name);
+ netdev_err(bp->dev, "Fan Failure on Network Controller has caused the driver to shutdown the card to prevent permanent damage.\n"
+ "Please contact Dell Support for assistance.\n");
}
static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
@@ -4296,7 +4294,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
bnx2x_net_stats_update(bp);
bnx2x_drv_stats_update(bp);
- if (bp->msglevel & NETIF_MSG_TIMER) {
+ if (netif_msg_timer(bp)) {
struct bnx2x_fastpath *fp0_rx = bp->fp;
struct bnx2x_fastpath *fp0_tx = bp->fp;
struct tstorm_per_client_stats *old_tclient =
@@ -4306,7 +4304,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
struct net_device_stats *nstats = &bp->dev->stats;
int i;
- printk(KERN_DEBUG "%s:\n", bp->dev->name);
+ netdev_printk(KERN_DEBUG, bp->dev, "\n");
printk(KERN_DEBUG " tx avail (%4x) tx hc idx (%x)"
" tx pkt (%lx)\n",
bnx2x_tx_avail(fp0_tx),
@@ -4464,7 +4462,7 @@ static void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event)
/* Make sure the state has been "changed" */
smp_wmb();
- if ((event != STATS_EVENT_UPDATE) || (bp->msglevel & NETIF_MSG_TIMER))
+ if ((event != STATS_EVENT_UPDATE) || netif_msg_timer(bp))
DP(BNX2X_MSG_STATS, "state %d -> event %d -> state %d\n",
state, event, bp->stats_state);
}
@@ -5674,8 +5672,7 @@ gunzip_nomem2:
bp->gunzip_buf = NULL;
gunzip_nomem1:
- printk(KERN_ERR PFX "%s: Cannot allocate firmware buffer for"
- " un-compression\n", bp->dev->name);
+ netdev_err(bp->dev, "Cannot allocate firmware buffer for un-compression\n");
return -ENOMEM;
}
@@ -5721,14 +5718,13 @@ static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len)
rc = zlib_inflate(bp->strm, Z_FINISH);
if ((rc != Z_OK) && (rc != Z_STREAM_END))
- printk(KERN_ERR PFX "%s: Firmware decompression error: %s\n",
- bp->dev->name, bp->strm->msg);
+ netdev_err(bp->dev, "Firmware decompression error: %s\n",
+ bp->strm->msg);
bp->gunzip_outlen = (FW_BUF_SIZE - bp->strm->avail_out);
if (bp->gunzip_outlen & 0x3)
- printk(KERN_ERR PFX "%s: Firmware decompression error:"
- " gunzip_outlen (%d) not aligned\n",
- bp->dev->name, bp->gunzip_outlen);
+ netdev_err(bp->dev, "Firmware decompression error: gunzip_outlen (%d) not aligned\n",
+ bp->gunzip_outlen);
bp->gunzip_outlen >>= 2;
zlib_inflateEnd(bp->strm);
@@ -6213,8 +6209,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
if (sizeof(union cdu_context) != 1024)
/* we currently assume that a context is 1024 bytes */
- printk(KERN_ALERT PFX "please adjust the size of"
- " cdu_context(%ld)\n", (long)sizeof(union cdu_context));
+ pr_alert("please adjust the size of cdu_context(%ld)\n",
+ (long)sizeof(union cdu_context));
bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE);
val = (4 << 24) + (0 << 12) + 1024;
@@ -7018,11 +7014,10 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
}
i = BNX2X_NUM_QUEUES(bp);
- printk(KERN_INFO PFX "%s: using MSI-X IRQs: sp %d fp[%d] %d"
- " ... fp[%d] %d\n",
- bp->dev->name, bp->msix_table[0].vector,
- 0, bp->msix_table[offset].vector,
- i - 1, bp->msix_table[offset + i - 1].vector);
+ netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d ... fp[%d] %d\n",
+ bp->msix_table[0].vector,
+ 0, bp->msix_table[offset].vector,
+ i - 1, bp->msix_table[offset + i - 1].vector);
return 0;
}
@@ -7477,8 +7472,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
}
if (bp->flags & USING_MSI_FLAG) {
bp->dev->irq = bp->pdev->irq;
- printk(KERN_INFO PFX "%s: using MSI IRQ %d\n",
- bp->dev->name, bp->pdev->irq);
+ netdev_info(bp->dev, "using MSI IRQ %d\n",
+ bp->pdev->irq);
}
}
@@ -8297,8 +8292,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
val3 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[8]);
val4 = SHMEM_RD(bp, dev_info.shared_hw_config.part_num[12]);
- printk(KERN_INFO PFX "part number %X-%X-%X-%X\n",
- val, val2, val3, val4);
+ pr_info("part number %X-%X-%X-%X\n", val, val2, val3, val4);
}
static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
@@ -8909,17 +8903,15 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
bnx2x_undi_unload(bp);
if (CHIP_REV_IS_FPGA(bp))
- printk(KERN_ERR PFX "FPGA detected\n");
+ pr_err("FPGA detected\n");
if (BP_NOMCP(bp) && (func == 0))
- printk(KERN_ERR PFX
- "MCP disabled, must load devices in order!\n");
+ pr_err("MCP disabled, must load devices in order!\n");
/* Set multi queue mode */
if ((multi_mode != ETH_RSS_MODE_DISABLED) &&
((int_mode == INT_MODE_INTx) || (int_mode == INT_MODE_MSI))) {
- printk(KERN_ERR PFX
- "Multi disabled since int_mode requested is not MSI-X\n");
+ pr_err("Multi disabled since int_mode requested is not MSI-X\n");
multi_mode = ETH_RSS_MODE_DISABLED;
}
bp->multi_mode = multi_mode;
@@ -9345,7 +9337,7 @@ static u32 bnx2x_get_msglevel(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
- return bp->msglevel;
+ return bp->msg_enable;
}
static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
@@ -9353,7 +9345,7 @@ static void bnx2x_set_msglevel(struct net_device *dev, u32 level)
struct bnx2x *bp = netdev_priv(dev);
if (capable(CAP_NET_ADMIN))
- bp->msglevel = level;
+ bp->msg_enable = level;
}
static int bnx2x_nway_reset(struct net_device *dev)
@@ -10644,7 +10636,7 @@ static const struct {
((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
#define IS_FUNC_STAT(i) (bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
#define IS_E1HMF_MODE_STAT(bp) \
- (IS_E1HMF(bp) && !(bp->msglevel & BNX2X_MSG_STATS))
+ (IS_E1HMF(bp) && !(bp->msg_enable & BNX2X_MSG_STATS))
static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
{
@@ -11777,20 +11769,18 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
rc = pci_enable_device(pdev);
if (rc) {
- printk(KERN_ERR PFX "Cannot enable PCI device, aborting\n");
+ pr_err("Cannot enable PCI device, aborting\n");
goto err_out;
}
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "Cannot find PCI device base address,"
- " aborting\n");
+ pr_err("Cannot find PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}
if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "Cannot find second PCI device"
- " base address, aborting\n");
+ pr_err("Cannot find second PCI device base address, aborting\n");
rc = -ENODEV;
goto err_out_disable;
}
@@ -11798,8 +11788,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
if (atomic_read(&pdev->enable_cnt) == 1) {
rc = pci_request_regions(pdev, DRV_MODULE_NAME);
if (rc) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources,"
- " aborting\n");
+ pr_err("Cannot obtain PCI resources, aborting\n");
goto err_out_disable;
}
@@ -11809,16 +11798,14 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find power management"
- " capability, aborting\n");
+ pr_err("Cannot find power management capability, aborting\n");
rc = -EIO;
goto err_out_release;
}
bp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (bp->pcie_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PCI Express capability,"
- " aborting\n");
+ pr_err("Cannot find PCI Express capability, aborting\n");
rc = -EIO;
goto err_out_release;
}
@@ -11826,15 +11813,13 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
bp->flags |= USING_DAC_FLAG;
if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
- printk(KERN_ERR PFX "pci_set_consistent_dma_mask"
- " failed, aborting\n");
+ pr_err("pci_set_consistent_dma_mask failed, aborting\n");
rc = -EIO;
goto err_out_release;
}
} else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
- printk(KERN_ERR PFX "System does not support DMA,"
- " aborting\n");
+ pr_err("System does not support DMA, aborting\n");
rc = -EIO;
goto err_out_release;
}
@@ -11847,7 +11832,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
bp->regview = pci_ioremap_bar(pdev, 0);
if (!bp->regview) {
- printk(KERN_ERR PFX "Cannot map register space, aborting\n");
+ pr_err("Cannot map register space, aborting\n");
rc = -ENOMEM;
goto err_out_release;
}
@@ -11856,7 +11841,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
min_t(u64, BNX2X_DB_SIZE,
pci_resource_len(pdev, 2)));
if (!bp->doorbells) {
- printk(KERN_ERR PFX "Cannot map doorbell space, aborting\n");
+ pr_err("Cannot map doorbell space, aborting\n");
rc = -ENOMEM;
goto err_out_unmap;
}
@@ -11958,8 +11943,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
offset = be32_to_cpu(sections[i].offset);
len = be32_to_cpu(sections[i].len);
if (offset + len > firmware->size) {
- printk(KERN_ERR PFX "Section %d length is out of "
- "bounds\n", i);
+ pr_err("Section %d length is out of bounds\n", i);
return -EINVAL;
}
}
@@ -11971,8 +11955,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) {
if (be16_to_cpu(ops_offsets[i]) > num_ops) {
- printk(KERN_ERR PFX "Section offset %d is out of "
- "bounds\n", i);
+ pr_err("Section offset %d is out of bounds\n", i);
return -EINVAL;
}
}
@@ -11984,8 +11967,7 @@ static int __devinit bnx2x_check_firmware(struct bnx2x *bp)
(fw_ver[1] != BCM_5710_FW_MINOR_VERSION) ||
(fw_ver[2] != BCM_5710_FW_REVISION_VERSION) ||
(fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) {
- printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d."
- " Should be %d.%d.%d.%d\n",
+ pr_err("Bad FW version:%d.%d.%d.%d. Should be %d.%d.%d.%d\n",
fw_ver[0], fw_ver[1], fw_ver[2],
fw_ver[3], BCM_5710_FW_MAJOR_VERSION,
BCM_5710_FW_MINOR_VERSION,
@@ -12035,18 +12017,17 @@ static inline void be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n)
target[i] = be16_to_cpu(source[i]);
}
-#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
- do { \
- u32 len = be32_to_cpu(fw_hdr->arr.len); \
- bp->arr = kmalloc(len, GFP_KERNEL); \
- if (!bp->arr) { \
- printk(KERN_ERR PFX "Failed to allocate %d bytes " \
- "for "#arr"\n", len); \
- goto lbl; \
- } \
- func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
- (u8 *)bp->arr, len); \
- } while (0)
+#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \
+do { \
+ u32 len = be32_to_cpu(fw_hdr->arr.len); \
+ bp->arr = kmalloc(len, GFP_KERNEL); \
+ if (!bp->arr) { \
+ pr_err("Failed to allocate %d bytes for "#arr"\n", len); \
+ goto lbl; \
+ } \
+ func(bp->firmware->data + be32_to_cpu(fw_hdr->arr.offset), \
+ (u8 *)bp->arr, len); \
+} while (0)
static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
{
@@ -12059,18 +12040,17 @@ static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
else
fw_file_name = FW_FILE_NAME_E1H;
- printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
+ pr_info("Loading %s\n", fw_file_name);
rc = request_firmware(&bp->firmware, fw_file_name, dev);
if (rc) {
- printk(KERN_ERR PFX "Can't load firmware file %s\n",
- fw_file_name);
+ pr_err("Can't load firmware file %s\n", fw_file_name);
goto request_firmware_exit;
}
rc = bnx2x_check_firmware(bp);
if (rc) {
- printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name);
+ pr_err("Corrupt firmware file %s\n", fw_file_name);
goto request_firmware_exit;
}
@@ -12129,12 +12109,12 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
/* dev zeroed in init_etherdev */
dev = alloc_etherdev_mq(sizeof(*bp), MAX_CONTEXT);
if (!dev) {
- printk(KERN_ERR PFX "Cannot allocate net device\n");
+ pr_err("Cannot allocate net device\n");
return -ENOMEM;
}
bp = netdev_priv(dev);
- bp->msglevel = debug;
+ bp->msg_enable = debug;
pci_set_drvdata(pdev, dev);
@@ -12151,7 +12131,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
/* Set init arrays */
rc = bnx2x_init_firmware(bp, &pdev->dev);
if (rc) {
- printk(KERN_ERR PFX "Error loading firmware\n");
+ pr_err("Error loading firmware\n");
goto init_one_exit;
}
@@ -12162,12 +12142,11 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
}
bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
- printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
- " IRQ %d, ", dev->name, board_info[ent->driver_data].name,
- (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
- pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
- dev->base_addr, bp->pdev->irq);
- printk(KERN_CONT "node addr %pM\n", dev->dev_addr);
+ netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+ board_info[ent->driver_data].name,
+ (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
+ pcie_width, (pcie_speed == 2) ? "5GHz (Gen2)" : "2.5GHz",
+ dev->base_addr, bp->pdev->irq, dev->dev_addr);
return 0;
@@ -12195,7 +12174,7 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
struct bnx2x *bp;
if (!dev) {
- printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ pr_err("BAD net device from bnx2x_init_one\n");
return;
}
bp = netdev_priv(dev);
@@ -12228,7 +12207,7 @@ static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state)
struct bnx2x *bp;
if (!dev) {
- printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ pr_err("BAD net device from bnx2x_init_one\n");
return -ENODEV;
}
bp = netdev_priv(dev);
@@ -12260,7 +12239,7 @@ static int bnx2x_resume(struct pci_dev *pdev)
int rc;
if (!dev) {
- printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n");
+ pr_err("BAD net device from bnx2x_init_one\n");
return -ENODEV;
}
bp = netdev_priv(dev);
@@ -12463,17 +12442,17 @@ static int __init bnx2x_init(void)
{
int ret;
- printk(KERN_INFO "%s", version);
+ pr_info("%s", version);
bnx2x_wq = create_singlethread_workqueue("bnx2x");
if (bnx2x_wq == NULL) {
- printk(KERN_ERR PFX "Cannot create workqueue\n");
+ pr_err("Cannot create workqueue\n");
return -ENOMEM;
}
ret = pci_register_driver(&bnx2x_pci_driver);
if (ret) {
- printk(KERN_ERR PFX "Cannot register driver\n");
+ pr_err("Cannot register driver\n");
destroy_workqueue(bnx2x_wq);
}
return ret;
--
1.7.0.14.g7e948
From: Joe Perches <[email protected]>
Date: Wed, 17 Feb 2010 17:01:47 -0800
> Use the newly added netdev_<level> and netif_<level> logging macros
> in some of the drivers.
>
> Adds some message logging consistency.
>
> pci-skeleton had a checkpatch style cleaning as well.
The sis190.c and tg3.c changes didn't apply due to other
recent commits into the net-next-2.6 tree
I applied all of the others.
Thanks.
From: David Dillow <[email protected]>
Date: Wed, 17 Feb 2010 21:00:47 -0500
> On Wed, 2010-02-17 at 17:46 -0800, David Miller wrote:
>> From: Joe Perches <[email protected]>
>> Date: Wed, 17 Feb 2010 17:01:47 -0800
>>
>> > Use the newly added netdev_<level> and netif_<level> logging macros
>> > in some of the drivers.
>> >
>> > Adds some message logging consistency.
>> >
>> > pci-skeleton had a checkpatch style cleaning as well.
>>
>> The sis190.c and tg3.c changes didn't apply due to other
>> recent commits into the net-next-2.6 tree
>>
>> I applied all of the others.
>
> Have you pushed? I'd rather some of the typhoon ones not go in.
Why not?
From: David Miller <[email protected]>
Date: Wed, 17 Feb 2010 18:01:22 -0800 (PST)
> From: David Dillow <[email protected]>
> Date: Wed, 17 Feb 2010 21:00:47 -0500
>
>> Have you pushed? I'd rather some of the typhoon ones not go in.
>
> Why not?
Please answer soon, I'm not going to wait around for you to "get
around" to providing a reason for the typhoon changes to not go in.
I want to push this our so Joe can continue his work.
And if the reason is "this makes some pending patches I have not apply
any more", that's not a valid reason.
On Wed, 2010-02-17 at 17:02 -0800, Joe Perches wrote:
> Use pr_<level>
> Use netdev_<level>
The way the driver uses tp->name, most of the pr_<level> changes add an
extraneous "typhoon:" to the front of the messages, which is not
desirable. Your absolute change-over from PFX/ERR_PFX to pr_fmt()
KBUILD_MODNAME misses the distinction between the message where the
prefix is needed, and where it isn't.
The netdev_<level> changes are much more palatable to me than the
pr_<level> ones. I have no problem getting behind those.
> Coalesce long formats
I don't like these changes very much, either. I tend to work in 80 char
terminals, and the wrap of a few characters is usually annoying. I can
use a wider term, sure, but then you obscure the hint about too-deep
nesting that the more narrow terminal gives you. Also, it leaves
droppings about on those rare occasions when the code is printed 2-up.
I don't have very much to do on this driver these days, so I'll defer to
others on this issue. However, if you're going to be reformatting
things, please pull things up a line when you shorten things enough to
fit. You did it here:
> @@ -606,9 +605,8 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
> freeResp = typhoon_num_free_resp(tp);
>
> if(freeCmd < num_cmd || freeResp < num_resp) {
> - printk("%s: no descs for cmd, had (needed) %d (%d) cmd, "
> - "%d (%d) resp\n", tp->name, freeCmd, num_cmd,
> - freeResp, num_resp);
> + pr_err("%s: no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
> + tp->name, freeCmd, num_cmd, freeResp, num_resp);
> err = -ENOMEM;
> goto out;
> }
But not here -- perhaps an 80 char limit, I've not looked at the patched
file:
> @@ -1492,7 +1490,7 @@ typhoon_download_firmware(struct typhoon *tp)
> if(typhoon_wait_interrupt(ioaddr) < 0 ||
> ioread32(ioaddr + TYPHOON_REG_STATUS) !=
> TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
> - printk(KERN_ERR "%s: segment ready timeout\n",
> + pr_err("%s: segment ready timeout\n",
> tp->name);
> goto err_out_irq;
> }
These __func__ conversions need to go.
> @@ -1901,16 +1898,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
> xp_cmd.parm1 = events;
> err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> if(err < 0) {
> - printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
> - tp->name, err);
> + pr_err("%s: %s(): wake events cmd err %d\n",
> + tp->name, __func__, err);
> return err;
> }
Pull up tp->name?
> @@ -2089,11 +2085,11 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
> typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
>
> if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
> - printk(KERN_ERR "%s: timed out waiting for 3XP to halt\n",
> + pr_err("%s: timed out waiting for 3XP to halt\n",
> tp->name);
Please don't change this printk(), or change the version string, as
you'll have a redundant "typhoon:" in there now.
> @@ -2384,11 +2372,11 @@ typhoon_init_one(struct pci_dev *pdev, const > struct pci_device_id *ent
> int err = 0;
>
> if(!did_version++)
>- printk(KERN_INFO "%s", version);
>+ pr_info("%s", version);
Pull up pci_name()? Or does that overflow 80 chars?
> @@ -2384,11 +2372,11 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> dev = alloc_etherdev(sizeof(*tp));
> if(dev == NULL) {
> - printk(ERR_PFX "%s: unable to alloc new net device\n",
> + pr_err("%s: unable to alloc new net device\n",
> pci_name(pdev));
> err = -ENOMEM;
> goto error_out;
> @@ -2397,20 +2385,20 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> err = pci_enable_device(pdev);
> if(err < 0) {
> - printk(ERR_PFX "%s: unable to enable device\n",
> + pr_err("%s: unable to enable device\n",
> pci_name(pdev));
> goto error_out_dev;
> }
>
> err = pci_set_mwi(pdev);
> if(err < 0) {
> - printk(ERR_PFX "%s: unable to set MWI\n", pci_name(pdev));
> + pr_err("%s: unable to set MWI\n", pci_name(pdev));
> goto error_out_disable;
> }
>
> err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
> if(err < 0) {
> - printk(ERR_PFX "%s: No usable DMA configuration\n",
> + pr_err("%s: No usable DMA configuration\n",
> pci_name(pdev));
> goto error_out_mwi;
> }
> @@ -2523,7 +2509,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
> if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
> - printk(ERR_PFX "%s: cannot read MAC address\n",
> + pr_err("%s: cannot read MAC address\n",
> pci_name(pdev));
> err = -EIO;
> goto error_out_reset;
> @@ -2561,7 +2547,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
>
> if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
> - printk(ERR_PFX "%s: cannot put adapter to sleep\n",
> + pr_err("%s: cannot put adapter to sleep\n",
> pci_name(pdev));
> err = -EIO;
> goto error_out_reset;
On Wed, 2010-02-17 at 17:46 -0800, David Miller wrote:
> From: Joe Perches <[email protected]>
> Date: Wed, 17 Feb 2010 17:01:47 -0800
>
> > Use the newly added netdev_<level> and netif_<level> logging macros
> > in some of the drivers.
> >
> > Adds some message logging consistency.
> >
> > pci-skeleton had a checkpatch style cleaning as well.
>
> The sis190.c and tg3.c changes didn't apply due to other
> recent commits into the net-next-2.6 tree
>
> I applied all of the others.
Have you pushed? I'd rather some of the typhoon ones not go in.
On Wed, 2010-02-17 at 20:59 -0500, David Dillow wrote:
> On Wed, 2010-02-17 at 17:02 -0800, Joe Perches wrote:
> > Use pr_<level>
> > Use netdev_<level>
>
> The way the driver uses tp->name, most of the pr_<level> changes add an
> extraneous "typhoon:" to the front of the messages, which is not
> desirable. Your absolute change-over from PFX/ERR_PFX to pr_fmt()
> KBUILD_MODNAME misses the distinction between the message where the
> prefix is needed, and where it isn't.
Doesn't that mean that "%s: ...", tp->name should be removed?
> The netdev_<level> changes are much more palatable to me than the
> pr_<level> ones. I have no problem getting behind those.
>
> > Coalesce long formats
>
> I don't like these changes very much, either. I tend to work in 80 char
> terminals, and the wrap of a few characters is usually annoying.
Linus prefers formats not be split across multiple lines.
http://lkml.org/lkml/2008/2/23/251
I can change it back if you want, no matter to me.
> I don't have very much to do on this driver these days, so I'll defer to
> others on this issue. However, if you're going to be reformatting
> things, please pull things up a line when you shorten things enough to
> fit.
I try do that when I see it.
I prefer to use arguments on a separate line when all arguments
don't fit on a single one.
> But not here -- perhaps an 80 char limit, I've not looked at the patched
> file:
>
> > @@ -1492,7 +1490,7 @@ typhoon_download_firmware(struct typhoon *tp)
> > if(typhoon_wait_interrupt(ioaddr) < 0 ||
> > ioread32(ioaddr + TYPHOON_REG_STATUS) !=
> > TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
> > - printk(KERN_ERR "%s: segment ready timeout\n",
> > + pr_err("%s: segment ready timeout\n",
> > tp->name);
Doesn't fit tp->name on 80 cols
> These __func__ conversions need to go.
>
> > @@ -1901,16 +1898,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
> > xp_cmd.parm1 = events;
> > err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> > if(err < 0) {
> > - printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
> > - tp->name, err);
> > + pr_err("%s: %s(): wake events cmd err %d\n",
> > + tp->name, __func__, err);
> > return err;
> > }
why? It makes it harder to get the function name wrong if
it's rewritten.
> Pull up tp->name?
> > @@ -2089,11 +2085,11 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
> > typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> >
> > if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
> > - printk(KERN_ERR "%s: timed out waiting for 3XP to halt\n",
> > + pr_err("%s: timed out waiting for 3XP to halt\n",
> > tp->name);
>
> Please don't change this printk(), or change the version string, as
> you'll have a redundant "typhoon:" in there now.
How about something like this (on top of previous)?
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 843f986..6fa887a 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -136,7 +136,7 @@ static const int multicast_filter_limit = 32;
#include "typhoon.h"
static char version[] __devinitdata =
- "typhoon.c: version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+ "version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
MODULE_AUTHOR("David Dillow <[email protected]>");
MODULE_VERSION(DRV_MODULE_VERSION);
@@ -534,8 +534,8 @@ typhoon_process_response(struct typhoon *tp, int resp_size,
} else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
typhoon_hello(tp);
} else {
- pr_err("%s: dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
- tp->name, le16_to_cpu(resp->cmd),
+ pr_err("dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+ le16_to_cpu(resp->cmd),
resp->numDesc, resp->flags,
le16_to_cpu(resp->parm1),
le32_to_cpu(resp->parm2),
@@ -605,8 +605,8 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
freeResp = typhoon_num_free_resp(tp);
if(freeCmd < num_cmd || freeResp < num_resp) {
- pr_err("%s: no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
- tp->name, freeCmd, num_cmd, freeResp, num_resp);
+ pr_err("no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+ freeCmd, num_cmd, freeResp, num_resp);
err = -ENOMEM;
goto out;
}
@@ -731,7 +731,7 @@ typhoon_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
spin_unlock_bh(&tp->state_lock);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0)
- printk("%s: vlan offload error %d\n", tp->name, -err);
+ pr_err("vlan offload error %d\n", -err);
spin_lock_bh(&tp->state_lock);
}
@@ -1364,8 +1364,7 @@ typhoon_request_firmware(struct typhoon *tp)
err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev);
if (err) {
- pr_err("%s: Failed to load firmware \"%s\"\n",
- tp->name, FIRMWARE_NAME);
+ pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME);
return err;
}
@@ -1400,7 +1399,7 @@ typhoon_request_firmware(struct typhoon *tp)
return 0;
invalid_fw:
- pr_err("%s: Invalid firmware image\n", tp->name);
+ pr_err("Invalid firmware image\n");
release_firmware(typhoon_fw);
typhoon_fw = NULL;
return -EINVAL;
@@ -1437,7 +1436,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ENOMEM;
dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma);
if(!dpage) {
- pr_err("%s: no DMA mem for firmware\n", tp->name);
+ pr_err("no DMA mem for firmware\n");
goto err_out;
}
@@ -1450,7 +1449,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ETIMEDOUT;
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- pr_err("%s: card ready timeout\n", tp->name);
+ pr_err("card ready timeout\n");
goto err_out_irq;
}
@@ -1490,8 +1489,7 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- pr_err("%s: segment ready timeout\n",
- tp->name);
+ pr_err("segment ready timeout\n");
goto err_out_irq;
}
@@ -1524,15 +1522,15 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- pr_err("%s: final segment ready timeout\n", tp->name);
+ pr_err("final segment ready timeout\n");
goto err_out_irq;
}
iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- pr_err("%s: boot ready timeout, status 0x%0x\n",
- tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+ pr_err("boot ready timeout, status 0x%0x\n",
+ ioread32(ioaddr + TYPHOON_REG_STATUS));
goto err_out_irq;
}
@@ -1554,7 +1552,7 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
void __iomem *ioaddr = tp->ioaddr;
if(typhoon_wait_status(ioaddr, initial_status) < 0) {
- pr_err("%s: boot ready timeout\n", tp->name);
+ pr_err("boot ready timeout\n");
goto out_timeout;
}
@@ -1565,8 +1563,8 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
- pr_err("%s: boot finish timeout (status 0x%x)\n",
- tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+ pr_err("boot finish timeout (status 0x%x)\n",
+ ioread32(ioaddr + TYPHOON_REG_STATUS));
goto out_timeout;
}
@@ -1898,16 +1896,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
xp_cmd.parm1 = events;
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- pr_err("%s: %s(): wake events cmd err %d\n",
- tp->name, __func__, err);
+ pr_err("%s(): wake events cmd err %d\n",
+ __func__, err);
return err;
}
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- pr_err("%s: %s(): sleep cmd err %d\n",
- tp->name, __func__, err);
+ pr_err("%s(): sleep cmd err %d\n",
+ __func__, err);
return err;
}
@@ -1958,12 +1956,12 @@ typhoon_start_runtime(struct typhoon *tp)
err = typhoon_download_firmware(tp);
if(err < 0) {
- printk("%s: cannot load runtime on 3XP\n", tp->name);
+ pr_err("cannot load runtime on 3XP\n");
goto error_out;
}
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- printk("%s: cannot boot 3XP\n", tp->name);
+ pr_err("cannot boot 3XP\n");
err = -EIO;
goto error_out;
}
@@ -2067,8 +2065,7 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
}
if(i == TYPHOON_WAIT_TIMEOUT)
- pr_err("%s: halt timed out waiting for Tx to complete\n",
- tp->name);
+ pr_err("halt timed out waiting for Tx to complete\n");
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
@@ -2085,11 +2082,10 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
- pr_err("%s: timed out waiting for 3XP to halt\n",
- tp->name);
+ pr_err("timed out waiting for 3XP to halt\n");
if(typhoon_reset(ioaddr, wait_type) < 0) {
- pr_err("%s: unable to reset 3XP\n", tp->name);
+ pr_err("unable to reset 3XP\n");
return -ETIMEDOUT;
}
@@ -2376,8 +2372,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev = alloc_etherdev(sizeof(*tp));
if(dev == NULL) {
- pr_err("%s: unable to alloc new net device\n",
- pci_name(pdev));
+ pr_err("%s: unable to alloc new net device\n", pci_name(pdev));
err = -ENOMEM;
goto error_out;
}
@@ -2385,8 +2380,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_enable_device(pdev);
if(err < 0) {
- pr_err("%s: unable to enable device\n",
- pci_name(pdev));
+ pr_err("%s: unable to enable device\n", pci_name(pdev));
goto error_out_dev;
}
@@ -2398,8 +2392,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if(err < 0) {
- pr_err("%s: No usable DMA configuration\n",
- pci_name(pdev));
+ pr_err("%s: No usable DMA configuration\n", pci_name(pdev));
goto error_out_mwi;
}
@@ -2432,8 +2425,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_request_regions(pdev, "typhoon");
if(err < 0) {
- pr_err("%s: could not request regions\n",
- pci_name(pdev));
+ pr_err("%s: could not request regions\n", pci_name(pdev));
goto error_out_mwi;
}
@@ -2455,8 +2447,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared),
&shared_dma);
if(!shared) {
- pr_err("%s: could not allocate DMA memory\n",
- pci_name(pdev));
+ pr_err("%s: could not allocate DMA memory\n", pci_name(pdev));
err = -ENOMEM;
goto error_out_remap;
}
@@ -2493,7 +2484,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* dev->name is not valid until we register, but we need to
* use some common routines to initialize the card. So that those
- * routines print the right name, we keep our oun pointer to the name
+ * routines print the right name, we keep our own pointer to the name
*/
tp->name = pci_name(pdev);
@@ -2501,16 +2492,14 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
typhoon_init_rings(tp);
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- pr_err("%s: cannot boot 3XP sleep image\n",
- pci_name(pdev));
+ pr_err("%s: cannot boot 3XP sleep image\n", pci_name(pdev));
err = -EIO;
goto error_out_reset;
}
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
- pr_err("%s: cannot read MAC address\n",
- pci_name(pdev));
+ pr_err("%s: cannot read MAC address\n", pci_name(pdev));
err = -EIO;
goto error_out_reset;
}
@@ -2530,7 +2519,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
pr_err("%s: Could not get Sleep Image version\n",
- pci_name(pdev));
+ pci_name(pdev));
goto error_out_reset;
}
@@ -2547,8 +2536,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
- pr_err("%s: cannot put adapter to sleep\n",
- pci_name(pdev));
+ pr_err("%s: cannot put adapter to sleep\n", pci_name(pdev));
err = -EIO;
goto error_out_reset;
}
On Wed, 2010-02-17 at 18:06 -0800, David Miller wrote:
> From: David Miller <[email protected]>
> > From: David Dillow <[email protected]>
> >> Have you pushed? I'd rather some of the typhoon ones not go in.
> >
> > Why not?
>
> Please answer soon, I'm not going to wait around for you to "get
> around" to providing a reason for the typhoon changes to not go in.
I answered before I asked the question about your push, but it didn't go
to you, only Joe, netdev, and LKML. I mentioned this privately, but
perhaps our messages crossed in flight?
I understand your need to get this settled quickly, and I'll respond as
fast as I can, but someone has to put the kids to bed here on the east
coast. ;)
On Wed, 2010-02-17 at 18:06 -0800, David Miller wrote:
> From: David Miller <[email protected]>
> Date: Wed, 17 Feb 2010 18:01:22 -0800 (PST)
> > From: David Dillow <[email protected]>
> > Date: Wed, 17 Feb 2010 21:00:47 -0500
> >> Have you pushed? I'd rather some of the typhoon ones not go in.
> > Why not?
> Please answer soon, I'm not going to wait around for you to "get
> around" to providing a reason for the typhoon changes to not go in.
Dave Dillow did give reasons for his dislike.
Perhaps passing in transit?
http://lkml.org/lkml/2010/2/17/458
On Wed, 2010-02-17 at 18:18 -0800, Joe Perches wrote:
> On Wed, 2010-02-17 at 20:59 -0500, David Dillow wrote:
> > On Wed, 2010-02-17 at 17:02 -0800, Joe Perches wrote:
> > > Use pr_<level>
> > > Use netdev_<level>
> >
> > The way the driver uses tp->name, most of the pr_<level> changes add an
> > extraneous "typhoon:" to the front of the messages, which is not
> > desirable. Your absolute change-over from PFX/ERR_PFX to pr_fmt()
> > KBUILD_MODNAME misses the distinction between the message where the
> > prefix is needed, and where it isn't.
>
> Doesn't that mean that "%s: ...", tp->name should be removed?
No, because the routines that use tp->name are called both before and
after the netdev is registered. Prior to that time, it contains the PCI
slot name -- "00:01.0" etc -- so that the user can determine which card
is acting up. Once the card is registered, it has "ethX" to use a
commonly expected name for the card.
> > The netdev_<level> changes are much more palatable to me than the
> > pr_<level> ones. I have no problem getting behind those.
> >
> > > Coalesce long formats
> >
> > I don't like these changes very much, either. I tend to work in 80 char
> > terminals, and the wrap of a few characters is usually annoying.
>
> Linus prefers formats not be split across multiple lines.
> http://lkml.org/lkml/2008/2/23/251
> I can change it back if you want, no matter to me.
I'd prefer it, but I don't think it is really worth the effort now.
> > These __func__ conversions need to go.
> >
> > > @@ -1901,16 +1898,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
> > > xp_cmd.parm1 = events;
> > > err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> > > if(err < 0) {
> > > - printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
> > > - tp->name, err);
> > > + pr_err("%s: %s(): wake events cmd err %d\n",
> > > + tp->name, __func__, err);
> > > return err;
> > > }
>
> why? It makes it harder to get the function name wrong if
> it's rewritten.
This driver is rarely touched, except for API changes and such cleanups
people like to make from time to time. It is unlikely to be renamed,
adds code, and looks ugly. It may make sense for other printks in
functions that are in flux, but not here.
> How about something like this (on top of previous)?
The version change is fine, but you shouldn't get rid of tp->name.
From: David Dillow <[email protected]>
Date: Wed, 17 Feb 2010 21:30:21 -0500
> No, because the routines that use tp->name are called both before and
> after the netdev is registered. Prior to that time, it contains the PCI
> slot name -- "00:01.0" etc -- so that the user can determine which card
> is acting up. Once the card is registered, it has "ethX" to use a
> commonly expected name for the card.
In my opinion that's awful.
Pick one or the other format. For things that happen both
before and after netdev registry we really should provide
one style of device identification and those provided
by dev_*() are probably the best in these situations.
On Wed, 2010-02-17 at 21:30 -0500, David Dillow wrote:
> > Doesn't that mean that "%s: ...", tp->name should be removed?
> No, because the routines that use tp->name are called both before and
> after the netdev is registered. Prior to that time, it contains the PCI
> slot name -- "00:01.0" etc -- so that the user can determine which card
> is acting up. Once the card is registered, it has "ethX" to use a
> commonly expected name for the card.
I think those messages should just use netdev_<level> then.
If not registered, "(unregistered net_device)" and
the PCI slot are emitted.
>From include/linux/netdevice.h:
static inline const char *netdev_name(const struct net_device *dev)
{
if (dev->reg_state != NETREG_REGISTERED)
return "(unregistered net_device)";
return dev->name;
}
#define netdev_printk(level, netdev, format, args...) \
dev_printk(level, (netdev)->dev.parent, \
"%s: " format, \
netdev_name(netdev), ##args)
> > > These __func__ conversions need to go.
> > >
> > > > @@ -1901,16 +1898,16 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
> > > > xp_cmd.parm1 = events;
> > > > err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
> > > > if(err < 0) {
> > > > - printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
> > > > - tp->name, err);
> > > > + pr_err("%s: %s(): wake events cmd err %d\n",
> > > > + tp->name, __func__, err);
> > > > return err;
> > > > }
> >
> > why? It makes it harder to get the function name wrong if
> > it's rewritten.
>
> This driver is rarely touched, except for API changes and such cleanups
> people like to make from time to time. It is unlikely to be renamed,
> adds code, and looks ugly. It may make sense for other printks in
> functions that are in flux, but not here.
> > How about something like this (on top of previous)?
> The version change is fine, but you shouldn't get rid of tp->name.
How about this?
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 843f986..e41fb9e 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -161,7 +161,7 @@ module_param(use_mmio, int, 0);
#endif
struct typhoon_card_info {
- char *name;
+ const char *name;
int capabilities;
};
@@ -534,12 +534,13 @@ typhoon_process_response(struct typhoon *tp, int resp_size,
} else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
typhoon_hello(tp);
} else {
- pr_err("%s: dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
- tp->name, le16_to_cpu(resp->cmd),
- resp->numDesc, resp->flags,
- le16_to_cpu(resp->parm1),
- le32_to_cpu(resp->parm2),
- le32_to_cpu(resp->parm3));
+ netdev_err(tp->dev,
+ "dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+ le16_to_cpu(resp->cmd),
+ resp->numDesc, resp->flags,
+ le16_to_cpu(resp->parm1),
+ le32_to_cpu(resp->parm2),
+ le32_to_cpu(resp->parm3));
}
cleanup:
@@ -605,8 +606,8 @@ typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
freeResp = typhoon_num_free_resp(tp);
if(freeCmd < num_cmd || freeResp < num_resp) {
- pr_err("%s: no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
- tp->name, freeCmd, num_cmd, freeResp, num_resp);
+ netdev_err(tp->dev, "no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+ freeCmd, num_cmd, freeResp, num_resp);
err = -ENOMEM;
goto out;
}
@@ -731,7 +732,7 @@ typhoon_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
spin_unlock_bh(&tp->state_lock);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0)
- printk("%s: vlan offload error %d\n", tp->name, -err);
+ netdev_err(tp->dev, "vlan offload error %d\n", -err);
spin_lock_bh(&tp->state_lock);
}
@@ -1364,8 +1365,8 @@ typhoon_request_firmware(struct typhoon *tp)
err = request_firmware(&typhoon_fw, FIRMWARE_NAME, &tp->pdev->dev);
if (err) {
- pr_err("%s: Failed to load firmware \"%s\"\n",
- tp->name, FIRMWARE_NAME);
+ netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+ FIRMWARE_NAME);
return err;
}
@@ -1400,7 +1401,7 @@ typhoon_request_firmware(struct typhoon *tp)
return 0;
invalid_fw:
- pr_err("%s: Invalid firmware image\n", tp->name);
+ netdev_err(tp->dev, "Invalid firmware image\n");
release_firmware(typhoon_fw);
typhoon_fw = NULL;
return -EINVAL;
@@ -1437,7 +1438,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ENOMEM;
dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma);
if(!dpage) {
- pr_err("%s: no DMA mem for firmware\n", tp->name);
+ netdev_err(tp->dev, "no DMA mem for firmware\n");
goto err_out;
}
@@ -1450,7 +1451,7 @@ typhoon_download_firmware(struct typhoon *tp)
err = -ETIMEDOUT;
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
- pr_err("%s: card ready timeout\n", tp->name);
+ netdev_err(tp->dev, "card ready timeout\n");
goto err_out_irq;
}
@@ -1490,8 +1491,7 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- pr_err("%s: segment ready timeout\n",
- tp->name);
+ netdev_err(tp->dev, "segment ready timeout\n");
goto err_out_irq;
}
@@ -1524,15 +1524,15 @@ typhoon_download_firmware(struct typhoon *tp)
if(typhoon_wait_interrupt(ioaddr) < 0 ||
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
- pr_err("%s: final segment ready timeout\n", tp->name);
+ netdev_err(tp->dev, "final segment ready timeout\n");
goto err_out_irq;
}
iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- pr_err("%s: boot ready timeout, status 0x%0x\n",
- tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+ netdev_err(tp->dev, "boot ready timeout, status 0x%0x\n",
+ ioread32(ioaddr + TYPHOON_REG_STATUS));
goto err_out_irq;
}
@@ -1554,7 +1554,7 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
void __iomem *ioaddr = tp->ioaddr;
if(typhoon_wait_status(ioaddr, initial_status) < 0) {
- pr_err("%s: boot ready timeout\n", tp->name);
+ netdev_err(tp->dev, "boot ready timeout\n");
goto out_timeout;
}
@@ -1565,8 +1565,8 @@ typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
ioaddr + TYPHOON_REG_COMMAND);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
- pr_err("%s: boot finish timeout (status 0x%x)\n",
- tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
+ netdev_err(tp->dev, "boot finish timeout (status 0x%x)\n",
+ ioread32(ioaddr + TYPHOON_REG_STATUS));
goto out_timeout;
}
@@ -1898,16 +1898,15 @@ typhoon_sleep(struct typhoon *tp, pci_power_t state, __le16 events)
xp_cmd.parm1 = events;
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- pr_err("%s: %s(): wake events cmd err %d\n",
- tp->name, __func__, err);
+ netdev_err(tp->dev, "typhoon_sleep(): wake events cmd err %d\n",
+ err);
return err;
}
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(err < 0) {
- pr_err("%s: %s(): sleep cmd err %d\n",
- tp->name, __func__, err);
+ netdev_err(tp->dev, "typhoon_sleep(): sleep cmd err %d\n", err);
return err;
}
@@ -1958,12 +1957,12 @@ typhoon_start_runtime(struct typhoon *tp)
err = typhoon_download_firmware(tp);
if(err < 0) {
- printk("%s: cannot load runtime on 3XP\n", tp->name);
+ netdev_err(tp->dev, "cannot load runtime on 3XP\n");
goto error_out;
}
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
- printk("%s: cannot boot 3XP\n", tp->name);
+ netdev_err(tp->dev, "cannot boot 3XP\n");
err = -EIO;
goto error_out;
}
@@ -2067,8 +2066,7 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
}
if(i == TYPHOON_WAIT_TIMEOUT)
- pr_err("%s: halt timed out waiting for Tx to complete\n",
- tp->name);
+ netdev_err(tp->dev, "halt timed out waiting for Tx to complete\n");
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
@@ -2085,11 +2083,10 @@ typhoon_stop_runtime(struct typhoon *tp, int wait_type)
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
- pr_err("%s: timed out waiting for 3XP to halt\n",
- tp->name);
+ netdev_err(tp->dev, "timed out waiting for 3XP to halt\n");
if(typhoon_reset(ioaddr, wait_type) < 0) {
- pr_err("%s: unable to reset 3XP\n", tp->name);
+ netdev_err(tp->dev, "unable to reset 3XP\n");
return -ETIMEDOUT;
}
@@ -2385,55 +2382,48 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
err = pci_enable_device(pdev);
if(err < 0) {
- pr_err("%s: unable to enable device\n",
- pci_name(pdev));
+ netdev_err(dev, "unable to enable device\n");
goto error_out_dev;
}
err = pci_set_mwi(pdev);
if(err < 0) {
- pr_err("%s: unable to set MWI\n", pci_name(pdev));
+ netdev_err(dev, "unable to set MWI\n");
goto error_out_disable;
}
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if(err < 0) {
- pr_err("%s: No usable DMA configuration\n",
- pci_name(pdev));
+ netdev_err(dev, "No usable DMA configuration\n");
goto error_out_mwi;
}
/* sanity checks on IO and MMIO BARs
*/
if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
- pr_err("%s: region #1 not a PCI IO resource, aborting\n",
- pci_name(pdev));
+ netdev_err(dev, "region #1 not a PCI IO resource, aborting\n");
err = -ENODEV;
goto error_out_mwi;
}
if(pci_resource_len(pdev, 0) < 128) {
- pr_err("%s: Invalid PCI IO region size, aborting\n",
- pci_name(pdev));
+ netdev_err(dev, "Invalid PCI IO region size, aborting\n");
err = -ENODEV;
goto error_out_mwi;
}
if(!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
- pr_err("%s: region #1 not a PCI MMIO resource, aborting\n",
- pci_name(pdev));
+ netdev_err(dev, "region #1 not a PCI MMIO resource, aborting\n");
err = -ENODEV;
goto error_out_mwi;
}
if(pci_resource_len(pdev, 1) < 128) {
- pr_err("%s: Invalid PCI MMIO region size, aborting\n",
- pci_name(pdev));
+ netdev_err(dev, "Invalid PCI MMIO region size, aborting\n");
err = -ENODEV;
goto error_out_mwi;
}
err = pci_request_regions(pdev, "typhoon");
if(err < 0) {
- pr_err("%s: could not request regions\n",
- pci_name(pdev));
+ netdev_err(dev, "could not request regions\n");
goto error_out_mwi;
}
@@ -2444,8 +2434,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ioaddr = pci_iomap(pdev, use_mmio, 128);
if (!ioaddr) {
- pr_err("%s: cannot remap registers, aborting\n",
- pci_name(pdev));
+ netdev_err(dev, "cannot remap registers, aborting\n");
err = -EIO;
goto error_out_regions;
}
@@ -2455,8 +2444,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared),
&shared_dma);
if(!shared) {
- pr_err("%s: could not allocate DMA memory\n",
- pci_name(pdev));
+ netdev_err(dev, "could not allocate DMA memory\n");
err = -ENOMEM;
goto error_out_remap;
}
@@ -2479,7 +2467,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
* 5) Put the card to sleep.
*/
if (typhoon_reset(ioaddr, WaitSleep) < 0) {
- pr_err("%s: could not reset 3XP\n", pci_name(pdev));
+ netdev_err(dev, "could not reset 3XP\n");
err = -EIO;
goto error_out_dma;
}
@@ -2491,12 +2479,6 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
pci_save_state(pdev);
- /* dev->name is not valid until we register, but we need to
- * use some common routines to initialize the card. So that those
- * routines print the right name, we keep our oun pointer to the name
- */
- tp->name = pci_name(pdev);
-
typhoon_init_interface(tp);
typhoon_init_rings(tp);
@@ -2570,9 +2552,6 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if(register_netdev(dev) < 0)
goto error_out_reset;
- /* fixup our local name */
- tp->name = dev->name;
-
pci_set_drvdata(pdev, dev);
netdev_info(dev, "%s at %s 0x%llx, %pM\n",
On Wed, 2010-02-17 at 18:41 -0800, David Miller wrote:
> From: David Dillow <[email protected]>
> Date: Wed, 17 Feb 2010 21:30:21 -0500
>
> > No, because the routines that use tp->name are called both before and
> > after the netdev is registered. Prior to that time, it contains the PCI
> > slot name -- "00:01.0" etc -- so that the user can determine which card
> > is acting up. Once the card is registered, it has "ethX" to use a
> > commonly expected name for the card.
>
> In my opinion that's awful.
Neither you nor Jeff seemed to think it was an issue 7+ years ago, and
Jeff liked it when it was suggested as a solution to another driver's
problems. But times change, sure. And people learn from experience.
I liked it because it consistent with eth device naming when it could
be, and gave them useful info to go on when it failed during
initialization. This well before dev_*(). I don't think it is
particularly broken today -- even if we added the PCI info, I'd still
want to know if it was eth0 or eth8 that died on me without having to go
track down which one belonged to the slot.
In any event, that's not going to be cleaned up tonight.
I'm perfectly fine with the netdev_<level> changes, and can grudgingly
live with the overlong format strings, but the pr_<level> changes make
the output worse, and don't help readability or maintainability in my
opinion. I'm don't see how dropping the typhoon patch slows Joe down, so
I'd like to avoid having to fix things up after the fact.
From: David Dillow <[email protected]>
Date: Wed, 17 Feb 2010 22:01:04 -0500
> On Wed, 2010-02-17 at 18:41 -0800, David Miller wrote:
>> From: David Dillow <[email protected]>
>> Date: Wed, 17 Feb 2010 21:30:21 -0500
>>
>> > No, because the routines that use tp->name are called both before and
>> > after the netdev is registered. Prior to that time, it contains the PCI
>> > slot name -- "00:01.0" etc -- so that the user can determine which card
>> > is acting up. Once the card is registered, it has "ethX" to use a
>> > commonly expected name for the card.
>>
>> In my opinion that's awful.
>
> Neither you nor Jeff seemed to think it was an issue 7+ years ago, and
> Jeff liked it when it was suggested as a solution to another driver's
> problems.
I didn't even realize it was an issue and we also didn't have the nice
dev_*() macros back there.
> But times change, sure. And people learn from experience.
Right.
> I liked it because it consistent with eth device naming when it could
> be, and gave them useful info to go on when it failed during
> initialization.
How can printing a PCI device name string be consistent with eth
device naming?
> I'm perfectly fine with the netdev_<level> changes, and can grudgingly
> live with the overlong format strings, but the pr_<level> changes make
> the output worse, and don't help readability or maintainability in my
> opinion. I'm don't see how dropping the typhoon patch slows Joe down, so
> I'd like to avoid having to fix things up after the fact.
I already tossed his patch from my tree.
On Wed, 2010-02-17 at 22:01 -0500, David Dillow wrote:
> I'm don't see how dropping the typhoon patch slows Joe down, so
> I'd like to avoid having to fix things up after the fact.
I think that all of these can use netdev_<level>.
Also, these patches are trivial and can be
applied at leisure.
I do them with the long-term goal of creating
consistent kernel logging mechanisms.
Might take decades.
Anyway, if it's applied now, it can be cleaned
up as you like eventually. Certainly it'd be
done before 2.6.34 is released in a few months.
cheers, Joe
On Wed, 2010-02-17 at 18:53 -0800, Joe Perches wrote:
> On Wed, 2010-02-17 at 21:30 -0500, David Dillow wrote:
> > > Doesn't that mean that "%s: ...", tp->name should be removed?
> > No, because the routines that use tp->name are called both before and
> > after the netdev is registered. Prior to that time, it contains the PCI
> > slot name -- "00:01.0" etc -- so that the user can determine which card
> > is acting up. Once the card is registered, it has "ethX" to use a
> > commonly expected name for the card.
>
> I think those messages should just use netdev_<level> then.
>
> If not registered, "(unregistered net_device)" and
> the PCI slot are emitted.
Ugh on the length of the message now, but I'm certainly warming up to
the direction you're going.
I still don't see much harm in dropping the patches to typhoon for now
while I mull this over, and I don't like the loss of the driver prefix
during the initialization failures, but if David is hell-bent on doing
this tonight, then this version (plus the version string change) is an
improvement on the original patch.
You may also be able to get rid of the name field in struct typhoon
since it should now be unused.
Thank you for your willingness to address my concerns, Joe.
On Wed, 2010-02-17 at 19:10 -0800, David Miller wrote:
> > From: David Dillow <[email protected]>
> > Date: Wed, 17 Feb 2010 21:30:21 -0500
> > I liked it because it consistent with eth device naming when it could
> > be, and gave them useful info to go on when it failed during
> > initialization.
>
> How can printing a PCI device name string be consistent with eth
> device naming?
I meant that once it had been probed and initialized, it used the eth
name, consistent with other network drivers. Prior to that, it gave as
much info as it could to identify the failing device.
> I already tossed his patch from my tree.
Ok, I'll continue to work with Joe to get this acceptable to all of us.
I really need to focus on paying work tonight, so this will have to wait
until the weekend, but we'll have a replacement to you by Monday.
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Remove periods from most formats
Coalesce long formats
Use printk_once
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/tg3.c | 270 +++++++++++++++++++++-------------------------------
1 files changed, 109 insertions(+), 161 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ddf6615..f204f73 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -67,7 +67,6 @@
#include "tg3.h"
#define DRV_MODULE_NAME "tg3"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "3.108"
#define DRV_MODULE_RELDATE "February 17, 2010"
@@ -158,7 +157,7 @@
#define FIRMWARE_TG3TSO5 "tigon/tg3_tso5.bin"
static char version[] __devinitdata =
- DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")";
MODULE_AUTHOR("David S. Miller ([email protected]) and Jeff Garzik ([email protected])");
MODULE_DESCRIPTION("Broadcom Tigon3 ethernet driver");
@@ -1099,8 +1098,7 @@ static int tg3_mdio_init(struct tg3 *tp)
i = mdiobus_register(tp->mdio_bus);
if (i) {
- printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
- tp->dev->name, i);
+ netdev_warn(tp->dev, "mdiobus_reg failed (0x%x)\n", i);
mdiobus_free(tp->mdio_bus);
return i;
}
@@ -1108,7 +1106,7 @@ static int tg3_mdio_init(struct tg3 *tp)
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
if (!phydev || !phydev->drv) {
- printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
+ netdev_warn(tp->dev, "No PHY devices\n");
mdiobus_unregister(tp->mdio_bus);
mdiobus_free(tp->mdio_bus);
return -ENODEV;
@@ -1252,27 +1250,22 @@ static void tg3_ump_link_report(struct tg3 *tp)
static void tg3_link_report(struct tg3 *tp)
{
if (!netif_carrier_ok(tp->dev)) {
- if (netif_msg_link(tp))
- printk(KERN_INFO PFX "%s: Link is down.\n",
- tp->dev->name);
+ netif_info(tp, link, tp->dev, "Link is down\n");
tg3_ump_link_report(tp);
} else if (netif_msg_link(tp)) {
- printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
- tp->dev->name,
- (tp->link_config.active_speed == SPEED_1000 ?
- 1000 :
- (tp->link_config.active_speed == SPEED_100 ?
- 100 : 10)),
- (tp->link_config.active_duplex == DUPLEX_FULL ?
- "full" : "half"));
-
- printk(KERN_INFO PFX
- "%s: Flow control is %s for TX and %s for RX.\n",
- tp->dev->name,
- (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
- "on" : "off",
- (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
- "on" : "off");
+ netdev_info(tp->dev, "Link is up at %d Mbps, %s duplex\n",
+ (tp->link_config.active_speed == SPEED_1000 ?
+ 1000 :
+ (tp->link_config.active_speed == SPEED_100 ?
+ 100 : 10)),
+ (tp->link_config.active_duplex == DUPLEX_FULL ?
+ "full" : "half"));
+
+ netdev_info(tp->dev, "Flow control is %s for TX and %s for RX\n",
+ (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
+ "on" : "off",
+ (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
+ "on" : "off");
tg3_ump_link_report(tp);
}
}
@@ -1471,7 +1464,7 @@ static int tg3_phy_init(struct tg3 *tp)
phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
phydev->dev_flags, phydev->interface);
if (IS_ERR(phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
+ netdev_err(tp->dev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
}
@@ -2500,8 +2493,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
break;
default:
- printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
- tp->dev->name, state);
+ netdev_err(tp->dev, "Invalid power state (D%d) requested\n",
+ state);
return -EINVAL;
}
@@ -4342,10 +4335,8 @@ static void tg3_tx_recover(struct tg3 *tp)
BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
tp->write32_tx_mbox == tg3_write_indirect_mbox);
- printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
- "mapped I/O cycles to the network device, attempting to "
- "recover. Please report the problem to the driver maintainer "
- "and include system chipset information.\n", tp->dev->name);
+ netdev_warn(tp->dev, "The system may be re-ordering memory-mapped I/O cycles to the network device, attempting to recover\n"
+ "Please report the problem to the driver maintainer and include system chipset information.\n");
spin_lock(&tp->lock);
tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
@@ -5269,8 +5260,7 @@ static int tg3_restart_hw(struct tg3 *tp, int reset_phy)
err = tg3_init_hw(tp, reset_phy);
if (err) {
- printk(KERN_ERR PFX "%s: Failed to re-initialize device, "
- "aborting.\n", tp->dev->name);
+ netdev_err(tp->dev, "Failed to re-initialize device, aborting\n");
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_full_unlock(tp);
del_timer_sync(&tp->timer);
@@ -5343,10 +5333,10 @@ out:
static void tg3_dump_short_state(struct tg3 *tp)
{
- printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
- tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
- printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
- tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
+ netdev_err(tp->dev, "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
+ tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
+ netdev_err(tp->dev, "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
+ tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
}
static void tg3_tx_timeout(struct net_device *dev)
@@ -5354,8 +5344,7 @@ static void tg3_tx_timeout(struct net_device *dev)
struct tg3 *tp = netdev_priv(dev);
if (netif_msg_tx_err(tp)) {
- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
+ netdev_err(dev, "transmit timed out, resetting\n");
tg3_dump_short_state(tp);
}
@@ -5519,8 +5508,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
}
return NETDEV_TX_BUSY;
}
@@ -5723,8 +5711,7 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
}
return NETDEV_TX_BUSY;
}
@@ -6071,11 +6058,8 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
/* Now allocate fresh SKBs for each rx ring. */
for (i = 0; i < tp->rx_pending; i++) {
if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_STD, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX standard ring, "
- "only %d out of %d buffers were allocated "
- "successfully.\n",
- tp->dev->name, i, tp->rx_pending);
+ netdev_warn(tp->dev, "Using a smaller RX standard ring, only %d out of %d buffers were allocated successfully\n",
+ i, tp->rx_pending);
if (i == 0)
goto initfail;
tp->rx_pending = i;
@@ -6104,11 +6088,8 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp,
for (i = 0; i < tp->rx_jumbo_pending; i++) {
if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX jumbo ring, "
- "only %d out of %d buffers were "
- "allocated successfully.\n",
- tp->dev->name, i, tp->rx_jumbo_pending);
+ netdev_warn(tp->dev, "Using a smaller RX jumbo ring, only %d out of %d buffers were allocated successfully\n",
+ i, tp->rx_jumbo_pending);
if (i == 0)
goto initfail;
tp->rx_jumbo_pending = i;
@@ -6452,8 +6433,7 @@ static int tg3_stop_block(struct tg3 *tp, unsigned long ofs, u32 enable_bit, int
}
if (i == MAX_WAIT_CNT && !silent) {
- printk(KERN_ERR PFX "tg3_stop_block timed out, "
- "ofs=%lx enable_bit=%x\n",
+ pr_err("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
}
@@ -6500,9 +6480,8 @@ static int tg3_abort_hw(struct tg3 *tp, int silent)
break;
}
if (i >= MAX_WAIT_CNT) {
- printk(KERN_ERR PFX "tg3_abort_hw timed out for %s, "
- "TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
- tp->dev->name, tr32(MAC_TX_MODE));
+ netdev_err(tp->dev, "%s timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
+ __func__, tr32(MAC_TX_MODE));
err |= -ENODEV;
}
@@ -6723,8 +6702,7 @@ static int tg3_poll_fw(struct tg3 *tp)
!(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
- printk(KERN_INFO PFX "%s: No firmware running.\n",
- tp->dev->name);
+ netdev_info(tp->dev, "No firmware running\n");
}
if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
@@ -7152,10 +7130,8 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset)
}
if (i >= 10000) {
- printk(KERN_ERR PFX "tg3_reset_cpu timed out for %s, "
- "and %s CPU\n",
- tp->dev->name,
- (offset == RX_CPU_BASE ? "RX" : "TX"));
+ netdev_err(tp->dev, "%s timed out, %s CPU\n",
+ __func__, offset == RX_CPU_BASE ? "RX" : "TX");
return -ENODEV;
}
@@ -7180,9 +7156,8 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
if (cpu_base == TX_CPU_BASE &&
(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- printk(KERN_ERR PFX "tg3_load_firmware_cpu: Trying to load "
- "TX cpu firmware on %s which is 5705.\n",
- tp->dev->name);
+ netdev_err(tp->dev, "%s: Trying to load TX cpu firmware which is 5705\n",
+ __func__);
return -EINVAL;
}
@@ -7261,10 +7236,8 @@ static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp)
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
- "to set RX CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
- info.fw_base);
+ netdev_err(tp->dev, "tg3_load_firmware fails to set RX CPU PC, is %08x should be %08x\n",
+ tr32(RX_CPU_BASE + CPU_PC), info.fw_base);
return -ENODEV;
}
tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
@@ -7327,10 +7300,8 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
- "to set CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(cpu_base + CPU_PC),
- info.fw_base);
+ netdev_err(tp->dev, "%s fails to set CPU PC, is %08x should be %08x\n",
+ __func__, tr32(cpu_base + CPU_PC), info.fw_base);
return -ENODEV;
}
tw32(cpu_base + CPU_STATE, 0xffffffff);
@@ -7791,8 +7762,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
udelay(10);
}
if (i >= 2000) {
- printk(KERN_ERR PFX "tg3_reset_hw cannot enable BUFMGR for %s.\n",
- tp->dev->name);
+ netdev_err(tp->dev, "%s cannot enable BUFMGR\n", __func__);
return -ENODEV;
}
@@ -8655,10 +8625,8 @@ static int tg3_test_msi(struct tg3 *tp)
return err;
/* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- tp->dev->name);
+ netdev_warn(tp->dev, "No interrupt was generated using MSI, switching to INTx mode\n"
+ "Please report this failure to the PCI maintainer and include system chipset information\n");
free_irq(tp->napi[0].irq_vec, &tp->napi[0]);
@@ -8691,8 +8659,8 @@ static int tg3_request_firmware(struct tg3 *tp)
const __be32 *fw_data;
if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
- printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
- tp->dev->name, tp->fw_needed);
+ netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+ tp->fw_needed);
return -ENOENT;
}
@@ -8705,8 +8673,8 @@ static int tg3_request_firmware(struct tg3 *tp)
tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
if (tp->fw_len < (tp->fw->size - 12)) {
- printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
- tp->dev->name, tp->fw_len, tp->fw_needed);
+ netdev_err(tp->dev, "bogus length %d in \"%s\"\n",
+ tp->fw_len, tp->fw_needed);
release_firmware(tp->fw);
tp->fw = NULL;
return -EINVAL;
@@ -8744,9 +8712,8 @@ static bool tg3_enable_msix(struct tg3 *tp)
return false;
if (pci_enable_msix(tp->pdev, msix_ent, rc))
return false;
- printk(KERN_NOTICE
- "%s: Requested %d MSI-X vectors, received %d\n",
- tp->dev->name, tp->irq_cnt, rc);
+ netdev_notice(tp->dev, "Requested %d MSI-X vectors, received %d\n",
+ tp->irq_cnt, rc);
tp->irq_cnt = rc;
}
@@ -8771,8 +8738,7 @@ static void tg3_ints_init(struct tg3 *tp)
/* All MSI supporting chips should support tagged
* status. Assert that this is the case.
*/
- printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
- "Not using MSI.\n", tp->dev->name);
+ netdev_warn(tp->dev, "MSI without TAGGED? Not using MSI\n");
goto defcfg;
}
@@ -8817,12 +8783,10 @@ static int tg3_open(struct net_device *dev)
if (err)
return err;
} else if (err) {
- printk(KERN_WARNING "%s: TSO capability disabled.\n",
- tp->dev->name);
+ netdev_warn(tp->dev, "TSO capability disabled\n");
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
- printk(KERN_NOTICE "%s: TSO capability restored.\n",
- tp->dev->name);
+ netdev_notice(tp->dev, "TSO capability restored\n");
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
}
}
@@ -10687,8 +10651,7 @@ static int tg3_test_registers(struct tg3 *tp)
out:
if (netif_msg_hw(tp))
- printk(KERN_ERR PFX "Register test failed at offset %x\n",
- offset);
+ pr_err("Register test failed at offset %x\n", offset);
tw32(offset, save_val);
return -EIO;
}
@@ -11815,8 +11778,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
tp->tg3_flags |= TG3_FLAG_NVRAM;
if (tg3_nvram_lock(tp)) {
- printk(KERN_WARNING PFX "%s: Cannot get nvarm lock, "
- "tg3_nvram_init failed.\n", tp->dev->name);
+ netdev_warn(tp->dev, "Cannot get nvram lock, %s failed\n",
+ __func__);
return;
}
tg3_enable_nvram_access(tp);
@@ -13280,8 +13243,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
if (!tp->pcix_cap) {
- printk(KERN_ERR PFX "Cannot find PCI-X "
- "capability, aborting.\n");
+ pr_err("Cannot find PCI-X capability, aborting\n");
return -EIO;
}
@@ -13478,8 +13440,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
- printk(KERN_ERR PFX "(%s) transition to D0 failed\n",
- pci_name(tp->pdev));
+ pr_err("(%s) transition to D0 failed\n", pci_name(tp->pdev));
return err;
}
@@ -13653,7 +13614,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
err = tg3_phy_probe(tp);
if (err) {
- printk(KERN_ERR PFX "(%s) phy probe failed, err %d\n",
+ pr_err("(%s) phy probe failed, err %d\n",
pci_name(tp->pdev), err);
/* ... but do not return immediately ... */
tg3_mdio_fini(tp);
@@ -14163,7 +14124,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Send the buffer to the chip. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 1);
if (ret) {
- printk(KERN_ERR "tg3_test_dma() Write the buffer failed %d\n", ret);
+ pr_err("tg3_test_dma() Write the buffer failed %d\n",
+ ret);
break;
}
@@ -14173,7 +14135,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
u32 val;
tg3_read_mem(tp, 0x2100 + (i*4), &val);
if (le32_to_cpu(val) != p[i]) {
- printk(KERN_ERR " tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n", val, i);
+ pr_err(" tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n",
+ val, i);
/* ret = -ENODEV here? */
}
p[i] = 0;
@@ -14182,7 +14145,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Now read it back. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0);
if (ret) {
- printk(KERN_ERR "tg3_test_dma() Read the buffer failed %d\n", ret);
+ pr_err("tg3_test_dma() Read the buffer failed %d\n",
+ ret);
break;
}
@@ -14199,7 +14163,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
break;
} else {
- printk(KERN_ERR "tg3_test_dma() buffer corrupted on read back! (%d != %d)\n", p[i], i);
+ pr_err("tg3_test_dma() buffer corrupted on read back! (%d != %d)\n",
+ p[i], i);
ret = -ENODEV;
goto out;
}
@@ -14480,7 +14445,6 @@ static const struct net_device_ops tg3_netdev_ops_dma_bug = {
static int __devinit tg3_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- static int tg3_version_printed = 0;
struct net_device *dev;
struct tg3 *tp;
int i, err, pm_cap;
@@ -14488,20 +14452,17 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
char str[40];
u64 dma_mask, persist_dma_mask;
- if (tg3_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ printk_once(KERN_INFO "%s\n", version);
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device, "
- "aborting.\n");
+ pr_err("Cannot enable PCI device, aborting\n");
return err;
}
err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources, "
- "aborting.\n");
+ pr_err("Cannot obtain PCI resources, aborting\n");
goto err_out_disable_pdev;
}
@@ -14510,15 +14471,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
- "aborting.\n");
+ pr_err("Cannot find PowerManagement capability, aborting\n");
err = -EIO;
goto err_out_free_res;
}
dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS);
if (!dev) {
- printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
+ pr_err("Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto err_out_free_res;
}
@@ -14568,8 +14528,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tp->regs = pci_ioremap_bar(pdev, BAR_0);
if (!tp->regs) {
- printk(KERN_ERR PFX "Cannot map device registers, "
- "aborting.\n");
+ netdev_err(dev, "Cannot map device registers, aborting\n");
err = -ENOMEM;
goto err_out_free_dev;
}
@@ -14585,8 +14544,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_get_invariants(tp);
if (err) {
- printk(KERN_ERR PFX "Problem fetching invariants of chip, "
- "aborting.\n");
+ netdev_err(dev, "Problem fetching invariants of chip, aborting\n");
goto err_out_iounmap;
}
@@ -14621,8 +14579,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = pci_set_consistent_dma_mask(pdev,
persist_dma_mask);
if (err < 0) {
- printk(KERN_ERR PFX "Unable to obtain 64 bit "
- "DMA for consistent allocations\n");
+ netdev_err(dev, "Unable to obtain 64 bit DMA for consistent allocations\n");
goto err_out_iounmap;
}
}
@@ -14630,8 +14587,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
if (err || dma_mask == DMA_BIT_MASK(32)) {
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
- "aborting.\n");
+ netdev_err(dev, "No usable DMA configuration, aborting\n");
goto err_out_iounmap;
}
}
@@ -14680,16 +14636,14 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_get_device_address(tp);
if (err) {
- printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
- "aborting.\n");
+ netdev_err(dev, "Could not obtain valid ethernet address, aborting\n");
goto err_out_iounmap;
}
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
if (!tp->aperegs) {
- printk(KERN_ERR PFX "Cannot map APE registers, "
- "aborting.\n");
+ netdev_err(dev, "Cannot map APE registers, aborting\n");
err = -ENOMEM;
goto err_out_iounmap;
}
@@ -14713,7 +14667,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_test_dma(tp);
if (err) {
- printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
+ netdev_err(dev, "DMA engine test failed, aborting\n");
goto err_out_apeunmap;
}
@@ -14774,45 +14728,39 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "Cannot register net device, "
- "aborting.\n");
+ netdev_err(dev, "Cannot register net device, aborting\n");
goto err_out_apeunmap;
}
- printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
- dev->name,
- tp->board_part_number,
- tp->pci_chip_rev_id,
- tg3_bus_string(tp, str),
- dev->dev_addr);
+ netdev_info(dev, "Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
+ tp->board_part_number,
+ tp->pci_chip_rev_id,
+ tg3_bus_string(tp, str),
+ dev->dev_addr);
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
struct phy_device *phydev;
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
- printk(KERN_INFO
- "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
- tp->dev->name, phydev->drv->name,
- dev_name(&phydev->dev));
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
} else
- printk(KERN_INFO
- "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
- tp->dev->name, tg3_phy_string(tp),
- ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
- ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
- "10/100/1000Base-T")),
- (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
-
- printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
- dev->name,
- (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
- (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
- (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
- dev->name, tp->dma_rwctrl,
- (pdev->dma_mask == DMA_BIT_MASK(32)) ? 32 :
- (((u64) pdev->dma_mask == DMA_BIT_MASK(40)) ? 40 : 64));
+ netdev_info(dev, "attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
+ tg3_phy_string(tp),
+ ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
+ ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
+ "10/100/1000Base-T")),
+ (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
+
+ netdev_info(dev, "RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
+ (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
+ (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
+ (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
+ (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
+ (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+ netdev_info(dev, "dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ tp->dma_rwctrl,
+ pdev->dma_mask == DMA_BIT_MASK(32) ? 32 :
+ ((u64)pdev->dma_mask) == DMA_BIT_MASK(40) ? 40 : 64);
return 0;
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level> and netif_msg_<test>
Remove local #define net_<test> macros
Remove periods from formats
Signed-off-by: Joe Perches <[email protected]>
---
drivers/net/sis190.c | 152 +++++++++++++++++++++++++-------------------------
1 files changed, 75 insertions(+), 77 deletions(-)
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index bf2ffbb..267409b 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -17,7 +17,9 @@
See the file COPYING in this distribution for more information.
- */
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -32,17 +34,6 @@
#include <linux/dma-mapping.h>
#include <asm/irq.h>
-#define net_drv(p, arg...) if (netif_msg_drv(p)) \
- printk(arg)
-#define net_probe(p, arg...) if (netif_msg_probe(p)) \
- printk(arg)
-#define net_link(p, arg...) if (netif_msg_link(p)) \
- printk(arg)
-#define net_intr(p, arg...) if (netif_msg_intr(p)) \
- printk(arg)
-#define net_tx_err(p, arg...) if (netif_msg_tx_err(p)) \
- printk(arg)
-
#define PHY_MAX_ADDR 32
#define PHY_ID_ANY 0x1f
#define MII_REG_ANY 0x1f
@@ -50,7 +41,6 @@
#define DRV_VERSION "1.4"
#define DRV_NAME "sis190"
#define SIS190_DRIVER_NAME DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
-#define PFX DRV_NAME ": "
#define sis190_rx_skb netif_rx
#define sis190_rx_quota(count, quota) count
@@ -382,7 +372,7 @@ static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
}
if (i > 99)
- printk(KERN_ERR PFX "PHY command failed !\n");
+ pr_err("PHY command failed !\n");
}
static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
@@ -590,8 +580,7 @@ static int sis190_rx_interrupt(struct net_device *dev,
status = le32_to_cpu(desc->PSize);
- // net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name,
- // status);
+ //netif_info(tp, intr, dev, "Rx PSize = %08x\n", status);
if (sis190_rx_pkt_err(status, stats) < 0)
sis190_give_to_asic(desc, tp->rx_buf_sz);
@@ -602,9 +591,8 @@ static int sis190_rx_interrupt(struct net_device *dev,
struct pci_dev *pdev = tp->pci_dev;
if (unlikely(pkt_size > tp->rx_buf_sz)) {
- net_intr(tp, KERN_INFO
- "%s: (frag) status = %08x.\n",
- dev->name, status);
+ netif_info(tp, intr, dev,
+ "(frag) status = %08x\n", status);
stats->rx_dropped++;
stats->rx_length_errors++;
sis190_give_to_asic(desc, tp->rx_buf_sz);
@@ -638,12 +626,12 @@ static int sis190_rx_interrupt(struct net_device *dev,
tp->cur_rx = cur_rx;
delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
- if (!delta && count && netif_msg_intr(tp))
- printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name);
+ if (!delta && count)
+ netif_info(tp, intr, dev, "no Rx buffer allocated\n");
tp->dirty_rx += delta;
- if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp))
- printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name);
+ if ((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx)
+ netif_emerg(tp, intr, dev, "Rx buffers exhausted\n");
return count;
}
@@ -752,10 +740,10 @@ static irqreturn_t sis190_interrupt(int irq, void *__dev)
SIS_W32(IntrStatus, status);
- // net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status);
+// netif_info(tp, intr, dev, "status = %08x\n", status);
if (status & LinkChange) {
- net_intr(tp, KERN_INFO "%s: link change.\n", dev->name);
+ netif_info(tp, intr, dev, "link change\n");
schedule_work(&tp->phy_task);
}
@@ -933,8 +921,7 @@ static void sis190_phy_task(struct work_struct *work)
} else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
BMSR_ANEGCOMPLETE)) {
netif_carrier_off(dev);
- net_link(tp, KERN_WARNING "%s: auto-negotiating...\n",
- dev->name);
+ netif_warn(tp, link, dev, "auto-negotiating...\n");
mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
} else {
/* Rejoice ! */
@@ -960,13 +947,13 @@ static void sis190_phy_task(struct work_struct *work)
u16 adv, autoexp, gigadv, gigrec;
val = mdio_read(ioaddr, phy_id, 0x1f);
- net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
+ netif_info(tp, link, dev, "mii ext = %04x\n", val);
val = mdio_read(ioaddr, phy_id, MII_LPA);
adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION);
- net_link(tp, KERN_INFO "%s: mii lpa=%04x adv=%04x exp=%04x.\n",
- dev->name, val, adv, autoexp);
+ netif_info(tp, link, dev, "mii lpa=%04x adv=%04x exp=%04x\n",
+ val, adv, autoexp);
if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) {
/* check for gigabit speed */
@@ -1007,8 +994,7 @@ static void sis190_phy_task(struct work_struct *work)
tp->negotiated_lpa = p->val;
- net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
- p->msg);
+ netif_info(tp, link, dev, "link on %s mode\n", p->msg);
netif_carrier_on(dev);
}
@@ -1194,9 +1180,8 @@ static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
netif_stop_queue(dev);
- net_tx_err(tp, KERN_ERR PFX
- "%s: BUG! Tx Ring full when queue awake!\n",
- dev->name);
+ netif_err(tp, tx_err, dev,
+ "BUG! Tx Ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
@@ -1296,9 +1281,9 @@ static u16 sis190_default_phy(struct net_device *dev)
if (mii_if->phy_id != phy_default->phy_id) {
mii_if->phy_id = phy_default->phy_id;
- net_probe(tp, KERN_INFO
- "%s: Using transceiver at address %d as default.\n",
- pci_name(tp->pci_dev), mii_if->phy_id);
+ if (netif_msg_probe(tp))
+ pr_info("%s: Using transceiver at address %d as default\n",
+ pci_name(tp->pci_dev), mii_if->phy_id);
}
status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
@@ -1336,14 +1321,15 @@ static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
LAN : HOME) : p->type;
tp->features |= p->feature;
- net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
- pci_name(tp->pci_dev), p->name, phy_id);
+ if (netif_msg_probe(tp))
+ pr_info("%s: %s transceiver at address %d\n",
+ pci_name(tp->pci_dev), p->name, phy_id);
} else {
phy->type = UNKNOWN;
- net_probe(tp, KERN_INFO
- "%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
- pci_name(tp->pci_dev),
- phy->id[0], (phy->id[1] & 0xfff0), phy_id);
+ if (netif_msg_probe(tp))
+ pr_info("%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
+ pci_name(tp->pci_dev),
+ phy->id[0], (phy->id[1] & 0xfff0), phy_id);
}
}
@@ -1407,8 +1393,9 @@ static int __devinit sis190_mii_probe(struct net_device *dev)
}
if (list_empty(&tp->first_phy)) {
- net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
- pci_name(tp->pci_dev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: No MII transceivers found!\n",
+ pci_name(tp->pci_dev));
rc = -EIO;
goto out;
}
@@ -1454,7 +1441,8 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
dev = alloc_etherdev(sizeof(*tp));
if (!dev) {
- net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n");
+ if (netif_msg_drv(&debug))
+ pr_err("unable to alloc new ethernet\n");
rc = -ENOMEM;
goto err_out_0;
}
@@ -1467,34 +1455,39 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
rc = pci_enable_device(pdev);
if (rc < 0) {
- net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: enable failure\n", pci_name(pdev));
goto err_free_dev_1;
}
rc = -ENODEV;
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: region #0 is no MMIO resource\n",
+ pci_name(pdev));
goto err_pci_disable_2;
}
if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
- net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: invalid PCI region size(s)\n",
+ pci_name(pdev));
goto err_pci_disable_2;
}
rc = pci_request_regions(pdev, DRV_NAME);
if (rc < 0) {
- net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: could not request regions\n",
+ pci_name(pdev));
goto err_pci_disable_2;
}
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
- net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: DMA configuration failed\n",
+ pci_name(pdev));
goto err_free_res_3;
}
@@ -1502,8 +1495,9 @@ static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
if (!ioaddr) {
- net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_err("%s: cannot remap MMIO, aborting\n",
+ pci_name(pdev));
rc = -EIO;
goto err_free_res_3;
}
@@ -1539,9 +1533,8 @@ static void sis190_tx_timeout(struct net_device *dev)
if (tmp8 & CmdTxEnb)
SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
-
- net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n",
- dev->name, SIS_R32(TxControl), SIS_R32(TxSts));
+ netif_info(tp, tx_err, dev, "Transmit timeout, status %08x %08x\n",
+ SIS_R32(TxControl), SIS_R32(TxSts));
/* Disable interrupts by clearing the interrupt mask. */
SIS_W32(IntrMask, 0x0000);
@@ -1570,15 +1563,16 @@ static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
u16 sig;
int i;
- net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: Read MAC address from EEPROM\n", pci_name(pdev));
/* Check to see if there is a sane EEPROM */
sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
if ((sig == 0xffff) || (sig == 0x0000)) {
- net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
- pci_name(pdev), sig);
+ if (netif_msg_probe(tp))
+ pr_info("%s: Error EEPROM read %x\n",
+ pci_name(pdev), sig);
return -EIO;
}
@@ -1612,8 +1606,8 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
u8 reg, tmp8;
unsigned int i;
- net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: Read MAC address from APC\n", pci_name(pdev));
for (i = 0; i < ARRAY_SIZE(ids); i++) {
isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL);
@@ -1622,8 +1616,9 @@ static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
}
if (!isa_bridge) {
- net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
- pci_name(pdev));
+ if (netif_msg_probe(tp))
+ pr_info("%s: Can not find ISA bridge\n",
+ pci_name(pdev));
return -EIO;
}
@@ -1704,7 +1699,7 @@ static void sis190_set_speed_auto(struct net_device *dev)
int phy_id = tp->mii_if.phy_id;
int val;
- net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name);
+ netif_info(tp, link, dev, "Enabling Auto-negotiation\n");
val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
@@ -1831,7 +1826,8 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
int rc;
if (!printed_version) {
- net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
+ if (netif_msg_drv(&debug))
+ pr_info(SIS190_DRIVER_NAME " loaded\n");
printed_version = 1;
}
@@ -1871,12 +1867,14 @@ static int __devinit sis190_init_one(struct pci_dev *pdev,
if (rc < 0)
goto err_remove_mii;
- net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), %pM\n",
- pci_name(pdev), sis_chip_info[ent->driver_data].name,
- ioaddr, dev->irq, dev->dev_addr);
-
- net_probe(tp, KERN_INFO "%s: %s mode.\n", dev->name,
- (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+ if (netif_msg_probe(tp)) {
+ netdev_info(dev, "%s: %s at %p (IRQ: %d), %pM\n",
+ pci_name(pdev),
+ sis_chip_info[ent->driver_data].name,
+ ioaddr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "%s mode.\n",
+ (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+ }
netif_carrier_off(dev);
From: Joe Perches <[email protected]>
Date: Wed, 17 Feb 2010 21:44:19 -0800
> Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> Remove #define PFX
> Use pr_<level>
> Use netdev_<level>
> Remove periods from most formats
> Coalesce long formats
> Use printk_once
>
> Signed-off-by: Joe Perches <[email protected]>
Applied.
From: Joe Perches <[email protected]>
Date: Wed, 17 Feb 2010 22:00:17 -0800
> Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> Remove #define PFX
> Use pr_<level>
> Use netdev_<level>
> Use netif_<level> and netif_msg_<test>
> Remove local #define net_<test> macros
> Remove periods from formats
>
> Signed-off-by: Joe Perches <[email protected]>
Applied.