Enable BIG bit in the network configuration register, so the MAC doesn't
reject big frames (E.G. when vlans are used).
Signed-off-by: Peter Korsgaard <[email protected]>
---
drivers/net/macb.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index c8a18a6..4dde9db 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -793,6 +793,7 @@ static void macb_init_hw(struct macb *bp)
config = macb_readl(bp, NCFGR) & MACB_BF(CLK, -1L);
config |= MACB_BIT(PAE); /* PAuse Enable */
config |= MACB_BIT(DRFCS); /* Discard Rx FCS */
+ config |= MACB_BIT(BIG); /* Receive oversized frames */
if (bp->dev->flags & IFF_PROMISC)
config |= MACB_BIT(CAF); /* Copy All Frames */
if (!(bp->dev->flags & IFF_BROADCAST))
--
1.7.0
From: Peter Korsgaard <[email protected]>
Date: Wed, 7 Apr 2010 16:59:49 +0200
> Enable BIG bit in the network configuration register, so the MAC doesn't
> reject big frames (E.G. when vlans are used).
>
> Signed-off-by: Peter Korsgaard <[email protected]>
Applied to net-next-2.6, thanks.