Signed-off-by: Thomas Renninger <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
---
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 4591680..c6de3a9 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -391,7 +391,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
freqs.old = perf->states[perf->state].core_frequency * 1000;
freqs.new = data->freq_table[next_state].frequency;
- for_each_cpu(i, cmd.mask) {
+ for_each_cpu(i, policy->cpus) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
@@ -407,7 +407,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
}
}
- for_each_cpu(i, cmd.mask) {
+ for_each_cpu(i, policy->cpus) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
--
1.6.3
and fix the broken case if a core's frequency depends on others.
trace_power_frequency was only implemented in a rather ungeneric way
in acpi-cpufreq driver's target() function only.
-> Move the call to trace_power_frequency to
cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
notifier is triggered.
This will support power frequency tracing by all cpufreq drivers
trace_power_frequency did not trace frequency changes correctly when
the userspace governor was used or when CPU cores' frequency depend
on each other.
-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
which gets switched automatically fixes this.
Robert Schoene provided some important fixes on top of my initial
quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id
Signed-off-by: Thomas Renninger <[email protected]>
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
Tested-by: [email protected]
---
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 3 ---
arch/x86/kernel/process.c | 8 ++++----
drivers/cpufreq/cpufreq.c | 5 +++++
drivers/cpuidle/cpuidle.c | 2 +-
include/trace/events/power.h | 27 +++++++++++++++------------
tools/perf/builtin-timechart.c | 11 ++++++-----
6 files changed, 31 insertions(+), 25 deletions(-)
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index c6de3a9..9241402 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -34,7 +34,6 @@
#include <linux/compiler.h>
#include <linux/dmi.h>
#include <linux/slab.h>
-#include <trace/events/power.h>
#include <linux/acpi.h>
#include <linux/io.h>
@@ -364,8 +363,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
}
}
- trace_power_frequency(POWER_PSTATE, data->freq_table[next_state].frequency);
-
switch (data->cpu_feature) {
case SYSTEM_INTEL_MSR_CAPABLE:
cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 28ad9f4..bc3bbf6 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -371,7 +371,7 @@ static inline int hlt_use_halt(void)
void default_idle(void)
{
if (hlt_use_halt()) {
- trace_power_start(POWER_CSTATE, 1);
+ trace_power_start(POWER_CSTATE, 1, smp_processor_id());
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we
@@ -441,7 +441,7 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
*/
void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
{
- trace_power_start(POWER_CSTATE, (ax>>4)+1);
+ trace_power_start(POWER_CSTATE, (ax>>4)+1, smp_processor_id());
if (!need_resched()) {
if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)¤t_thread_info()->flags);
@@ -457,7 +457,7 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
static void mwait_idle(void)
{
if (!need_resched()) {
- trace_power_start(POWER_CSTATE, 1);
+ trace_power_start(POWER_CSTATE, 1, smp_processor_id());
if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)¤t_thread_info()->flags);
@@ -478,7 +478,7 @@ static void mwait_idle(void)
*/
static void poll_idle(void)
{
- trace_power_start(POWER_CSTATE, 0);
+ trace_power_start(POWER_CSTATE, 0, smp_processor_id());
local_irq_enable();
while (!need_resched())
cpu_relax();
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 2d5d575..8ec1539 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -29,6 +29,8 @@
#include <linux/completion.h>
#include <linux/mutex.h>
+#include <trace/events/power.h>
+
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_CORE, \
"cpufreq-core", msg)
@@ -354,6 +356,9 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
case CPUFREQ_POSTCHANGE:
adjust_jiffies(CPUFREQ_POSTCHANGE, freqs);
+ dprintk("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
+ (unsigned long)freqs->cpu);
+ trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
CPUFREQ_POSTCHANGE, freqs);
if (likely(policy) && likely(policy->cpu == freqs->cpu))
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 12fdd39..c672f4a 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -95,7 +95,7 @@ static void cpuidle_idle_call(void)
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev);
- trace_power_end(0);
+ trace_power_end(smp_processor_id());
}
/**
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index c4efe9b..35a2a6e 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -18,52 +18,55 @@ enum {
DECLARE_EVENT_CLASS(power,
- TP_PROTO(unsigned int type, unsigned int state),
+ TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
- TP_ARGS(type, state),
+ TP_ARGS(type, state, cpu_id),
TP_STRUCT__entry(
__field( u64, type )
__field( u64, state )
+ __field( u64, cpu_id )
),
TP_fast_assign(
__entry->type = type;
__entry->state = state;
+ __entry->cpu_id = cpu_id;
),
- TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long)__entry->state)
+ TP_printk("type=%lu state=%lu cpu_id=%lu", (unsigned long)__entry->type,
+ (unsigned long)__entry->state, (unsigned long)__entry->cpu_id)
);
DEFINE_EVENT(power, power_start,
- TP_PROTO(unsigned int type, unsigned int state),
+ TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
- TP_ARGS(type, state)
+ TP_ARGS(type, state, cpu_id)
);
DEFINE_EVENT(power, power_frequency,
- TP_PROTO(unsigned int type, unsigned int state),
+ TP_PROTO(unsigned int type, unsigned int state, unsigned int cpu_id),
- TP_ARGS(type, state)
+ TP_ARGS(type, state, cpu_id)
);
TRACE_EVENT(power_end,
- TP_PROTO(int dummy),
+ TP_PROTO(unsigned int cpu_id),
- TP_ARGS(dummy),
+ TP_ARGS(cpu_id),
TP_STRUCT__entry(
- __field( u64, dummy )
+ __field( u64, cpu_id )
),
TP_fast_assign(
- __entry->dummy = 0xffff;
+ __entry->cpu_id = cpu_id;
),
- TP_printk("dummy=%lu", (unsigned long)__entry->dummy)
+ TP_printk("cpu_id=%lu", (unsigned long)__entry->cpu_id)
);
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 0d4d8ff..7809bef 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -306,8 +306,9 @@ struct trace_entry {
struct power_entry {
struct trace_entry te;
- s64 type;
- s64 value;
+ u64 type;
+ u64 value;
+ u64 cpu_id;
};
#define TASK_COMM_LEN 16
@@ -504,13 +505,13 @@ static int process_sample_event(event_t *event, struct perf_session *session)
return 0;
if (strcmp(event_str, "power:power_start") == 0)
- c_state_start(data.cpu, data.time, pe->value);
+ c_state_start(pe->cpu_id, data.time, pe->value);
if (strcmp(event_str, "power:power_end") == 0)
- c_state_end(data.cpu, data.time);
+ c_state_end(pe->cpu_id, data.time);
if (strcmp(event_str, "power:power_frequency") == 0)
- p_state_change(data.cpu, data.time, pe->value);
+ p_state_change(pe->cpu_id, data.time, pe->value);
if (strcmp(event_str, "sched:sched_wakeup") == 0)
sched_wakeup(data.cpu, data.time, data.pid, te);
--
1.6.3