This is a patch to the pcl816.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 2
WARNING: line over 80 characters x 34
WARNING: please, no space before tabs x 1
WARNING: braces {} are not necessary for single statement blocks x 6
WARNING: printk() should include KERN_ facility level x 15
WARNING: braces {} are not necessary for any arm of this statement x 1
Signed-off-by: Gustavo Silva <[email protected]>
---
drivers/staging/comedi/drivers/pcl816.c | 223 +++++++++++++++++++------------
1 files changed, 140 insertions(+), 83 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 71c2a3a..4bfdda7 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -2,7 +2,7 @@
comedi/drivers/pcl816.c
Author: Juan Grigera <[email protected]>
- based on pcl818 by Michal Dobes <[email protected]> and bits of pcl812
+ based on pcl818 by Michal Dobes <[email protected]> and bits of pcl812
hardware driver for Advantech cards:
card: PCL-816, PCL814B
@@ -28,7 +28,7 @@ Configuration Options:
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
[2] - DMA (0=disable, 1, 3)
[3] - 0, 10=10MHz clock for 8254
- 1= 1MHz clock for 8254
+ 1= 1MHz clock for 8254
*/
@@ -85,7 +85,7 @@ Configuration Options:
#define INT_TYPE_AI3_DMA_RTC 10
/* RTC stuff... */
-#define RTC_IRQ 8
+#define RTC_IRQ 8
#define RTC_IO_EXTENT 0x10
#endif
@@ -253,7 +253,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
/* Set the input channel */
outb(CR_CHAN(insn->chanspec) & 0xf, dev->iobase + PCL816_MUX);
- outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE); /* select gain */
+ /* select gain */
+ outb(CR_RANGE(insn->chanspec), dev->iobase + PCL816_RANGE);
for (n = 0; n < insn->n; n++) {
@@ -268,8 +269,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
((inb(dev->iobase +
PCL816_AD_HI) << 8) |
(inb(dev->iobase + PCL816_AD_LO)));
-
- outb(0, dev->iobase + PCL816_CLRINT); /* clear INT (conversion end) flag */
+ /* clear INT (conversion end) flag */
+ outb(0, dev->iobase + PCL816_CLRINT);
break;
}
udelay(1);
@@ -278,7 +279,8 @@ static int pcl816_ai_insn_read(struct comedi_device *dev,
if (!timeout) {
comedi_error(dev, "A/D insn timeout\n");
data[0] = 0;
- outb(0, dev->iobase + PCL816_CLRINT); /* clear INT (conversion end) flag */
+ /* clear INT (conversion end) flag */
+ outb(0, dev->iobase + PCL816_CLRINT);
return -EIO;
}
@@ -332,7 +334,8 @@ static irqreturn_t interrupt_pcl816_ai_mode13_int(int irq, void *d)
}
if (!devpriv->ai_neverending)
- if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
+ /* all data sampled */
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) {
/* all data sampled */
pcl816_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
@@ -369,7 +372,8 @@ static void transfer_from_dma_buf(struct comedi_device *dev,
}
if (!devpriv->ai_neverending)
- if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
+ /* all data sampled */
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) {
pcl816_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
s->async->events |= COMEDI_CB_BLOCK;
@@ -391,7 +395,8 @@ static irqreturn_t interrupt_pcl816_ai_mode13_dma(int irq, void *d)
disable_dma(devpriv->dma);
this_dma_buf = devpriv->next_dma_buf;
- if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) { /* switch dma bufs */
+ /* switch dma bufs */
+ if ((devpriv->dma_runs_to_end > -1) || devpriv->ai_neverending) {
devpriv->next_dma_buf = 1 - devpriv->next_dma_buf;
set_dma_mode(devpriv->dma, DMA_MODE_READ);
@@ -467,14 +472,14 @@ static irqreturn_t interrupt_pcl816(int irq, void *d)
*/
static void pcl816_cmdtest_out(int e, struct comedi_cmd *cmd)
{
- printk("pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+ printk(KERN_INFO "pcl816 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
- printk("pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+ printk(KERN_INFO "pcl816 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
- printk("pcl816 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
- cmd->scan_end_src);
- printk("pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
- cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
+ printk(KERN_INFO "pcl816 e=%d stopsrc=%x scanend=%x\n", e,
+ cmd->stop_src, cmd->scan_end_src);
+ printk(KERN_INFO "pcl816 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n",
+ e, cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
}
/*
@@ -486,8 +491,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
int err = 0;
int tmp, divisor1 = 0, divisor2 = 0;
- DEBUG(printk("pcl816 pcl812_ai_cmdtest\n"); pcl816_cmdtest_out(-1, cmd);
- );
+ DEBUG(printk(KERN_INFO "pcl816 pcl812_ai_cmdtest\n");
+ pcl816_cmdtest_out(-1, cmd);
+ );
/* step 1: make sure trigger sources are trivially valid */
tmp = cmd->start_src;
@@ -515,11 +521,14 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
if (!cmd->stop_src || tmp != cmd->stop_src)
err++;
- if (err) {
+ if (err)
return 1;
- }
- /* step 2: make sure trigger sources are unique and mutually compatible */
+
+ /*
+ * step 2: make sure trigger sources
+ * are unique and mutually compatible
+ */
if (cmd->start_src != TRIG_NOW) {
cmd->start_src = TRIG_NOW;
@@ -544,9 +553,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
if (cmd->stop_src != TRIG_NONE && cmd->stop_src != TRIG_COUNT)
err++;
- if (err) {
+ if (err)
return 2;
- }
+
/* step 3: make sure arguments are trivially compatible */
if (cmd->start_arg != 0) {
@@ -586,9 +595,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
}
}
- if (err) {
+ if (err)
return 3;
- }
+
/* step 4: fix up any arguments */
if (cmd->convert_src == TRIG_TIMER) {
@@ -603,9 +612,9 @@ static int pcl816_ai_cmdtest(struct comedi_device *dev,
err++;
}
- if (err) {
+ if (err)
return 4;
- }
+
/* step 5: complain about special chanlist considerations */
@@ -643,7 +652,9 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
i8253_cascade_ns_to_timer(this_board->i8254_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
- if (divisor1 == 1) { /* PCL816 crash if any divisor is set to 1 */
+
+ /* PCL816 crash if any divisor is set to 1 */
+ if (divisor1 == 1) {
divisor1 = 2;
divisor2 /= 2;
}
@@ -676,8 +687,10 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->ai_neverending = 1;
}
- if ((cmd->flags & TRIG_WAKE_EOS)) { /* don't we want wake up every scan? */
- printk("pl816: You wankt WAKE_EOS but I dont want handle it");
+ /* don't we want wake up every scan? */
+ if ((cmd->flags & TRIG_WAKE_EOS)) {
+ printk(KERN_INFO
+ "pl816: You wankt WAKE_EOS but I dont want handle it");
/* devpriv->ai_eos=1; */
/* if (devpriv->ai_n_chan==1) */
/* devpriv->dma=0; // DMA is useless for this situation */
@@ -686,9 +699,17 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
if (devpriv->dma) {
bytes = devpriv->hwdmasize[0];
if (!devpriv->ai_neverending) {
- bytes = s->async->cmd.chanlist_len * s->async->cmd.chanlist_len * sizeof(short); /* how many */
- devpriv->dma_runs_to_end = bytes / devpriv->hwdmasize[0]; /* how many DMA pages we must fill */
- devpriv->last_dma_run = bytes % devpriv->hwdmasize[0]; /* on last dma transfer must be moved */
+ /* how many */
+ bytes = s->async->cmd.chanlist_len *
+ s->async->cmd.chanlist_len *
+ sizeof(short);
+
+ /* how many DMA pages we must fill */
+ devpriv->dma_runs_to_end = bytes /
+ devpriv->hwdmasize[0];
+
+ /* on last dma transfer must be moved */
+ devpriv->last_dma_run = bytes % devpriv->hwdmasize[0];
devpriv->dma_runs_to_end--;
if (devpriv->dma_runs_to_end >= 0)
bytes = devpriv->hwdmasize[0];
@@ -711,14 +732,22 @@ static int pcl816_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
switch (cmd->convert_src) {
case TRIG_TIMER:
devpriv->int816_mode = INT_TYPE_AI1_DMA;
- outb(0x32, dev->iobase + PCL816_CONTROL); /* Pacer+IRQ+DMA */
- outb(dmairq, dev->iobase + PCL816_STATUS); /* write irq and DMA to card */
+
+ /* Pacer+IRQ+DMA */
+ outb(0x32, dev->iobase + PCL816_CONTROL);
+
+ /* write irq and DMA to card */
+ outb(dmairq, dev->iobase + PCL816_STATUS);
break;
default:
devpriv->int816_mode = INT_TYPE_AI3_DMA;
- outb(0x34, dev->iobase + PCL816_CONTROL); /* Ext trig+IRQ+DMA */
- outb(dmairq, dev->iobase + PCL816_STATUS); /* write irq to card */
+
+ /* Ext trig+IRQ+DMA */
+ outb(0x34, dev->iobase + PCL816_CONTROL);
+
+ /* write irq to card */
+ outb(dmairq, dev->iobase + PCL816_STATUS);
break;
}
@@ -747,7 +776,8 @@ static int pcl816_ai_poll(struct comedi_device *dev, struct comedi_subdevice *s)
return 0;
}
- top1 = devpriv->hwdmasize[0] - top1; /* where is now DMA in buffer */
+ /* where is now DMA in buffer */
+ top1 = devpriv->hwdmasize[0] - top1;
top1 >>= 1; /* sample position */
top2 = top1 - devpriv->ai_poll_ptr;
if (top2 < 1) { /* no new samples */
@@ -787,16 +817,23 @@ static int pcl816_ai_cancel(struct comedi_device *dev,
disable_dma(devpriv->dma);
case INT_TYPE_AI1_INT:
case INT_TYPE_AI3_INT:
- outb(inb(dev->iobase + PCL816_CONTROL) & 0x73, dev->iobase + PCL816_CONTROL); /* Stop A/D */
+ outb(inb(dev->iobase + PCL816_CONTROL) & 0x73,
+ dev->iobase + PCL816_CONTROL); /* Stop A/D */
udelay(1);
outb(0, dev->iobase + PCL816_CONTROL); /* Stop A/D */
- outb(0xb0, dev->iobase + PCL816_CTRCTL); /* Stop pacer */
+
+ /* Stop pacer */
+ outb(0xb0, dev->iobase + PCL816_CTRCTL);
outb(0x70, dev->iobase + PCL816_CTRCTL);
outb(0, dev->iobase + PCL816_AD_LO);
inb(dev->iobase + PCL816_AD_LO);
inb(dev->iobase + PCL816_AD_HI);
- outb(0, dev->iobase + PCL816_CLRINT); /* clear INT request */
- outb(0, dev->iobase + PCL816_CONTROL); /* Stop A/D */
+
+ /* clear INT request */
+ outb(0, dev->iobase + PCL816_CLRINT);
+
+ /* Stop A/D */
+ outb(0, dev->iobase + PCL816_CONTROL);
devpriv->irq_blocked = 0;
devpriv->irq_was_now_closed = devpriv->int816_mode;
devpriv->int816_mode = 0;
@@ -866,8 +903,11 @@ start_pacer(struct comedi_device *dev, int mode, unsigned int divisor1,
outb(0xff, dev->iobase + PCL816_CTR0);
outb(0x00, dev->iobase + PCL816_CTR0);
udelay(1);
- outb(0xb4, dev->iobase + PCL816_CTRCTL); /* set counter 2 as mode 3 */
- outb(0x74, dev->iobase + PCL816_CTRCTL); /* set counter 1 as mode 3 */
+
+ /* set counter 2 as mode 3 */
+ outb(0xb4, dev->iobase + PCL816_CTRCTL);
+ /* set counter 1 as mode 3 */
+ outb(0x74, dev->iobase + PCL816_CTRCTL);
udelay(1);
if (mode == 1) {
@@ -903,41 +943,51 @@ check_channel_list(struct comedi_device *dev,
}
if (chanlen > 1) {
- chansegment[0] = chanlist[0]; /* first channel is everytime ok */
+ /* first channel is everytime ok */
+ chansegment[0] = chanlist[0];
for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
/* build part of chanlist */
- DEBUG(printk("%d. %d %d\n", i, CR_CHAN(chanlist[i]),
+ DEBUG(printk(KERN_INFO "%d. %d %d\n", i,
+ CR_CHAN(chanlist[i]),
CR_RANGE(chanlist[i]));)
+
+ /* we detect loop, this must by finish */
if (chanlist[0] == chanlist[i])
- break; /* we detect loop, this must by finish */
+ break;
nowmustbechan =
(CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
if (nowmustbechan != CR_CHAN(chanlist[i])) {
/* channel list isn't continous :-( */
- printk
- ("comedi%d: pcl816: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
- dev->minor, i, CR_CHAN(chanlist[i]),
- nowmustbechan, CR_CHAN(chanlist[0]));
+ printk(KERN_WARNING
+ "comedi%d: pcl816: channel list must "
+ "be continous! chanlist[%i]=%d but "
+ "must be %d or %d!\n", dev->minor,
+ i, CR_CHAN(chanlist[i]), nowmustbechan,
+ CR_CHAN(chanlist[0]));
return 0;
}
- chansegment[i] = chanlist[i]; /* well, this is next correct channel in list */
+ /* well, this is next correct channel in list */
+ chansegment[i] = chanlist[i];
}
- for (i = 0, segpos = 0; i < chanlen; i++) { /* check whole chanlist */
+ /* check whole chanlist */
+ for (i = 0, segpos = 0; i < chanlen; i++) {
DEBUG(printk("%d %d=%d %d\n",
CR_CHAN(chansegment[i % seglen]),
CR_RANGE(chansegment[i % seglen]),
CR_CHAN(chanlist[i]),
CR_RANGE(chanlist[i]));)
if (chanlist[i] != chansegment[i % seglen]) {
- printk
- ("comedi%d: pcl816: bad channel or range number! chanlist[%i]=%d,%d,%d and not %d,%d,%d!\n",
- dev->minor, i, CR_CHAN(chansegment[i]),
- CR_RANGE(chansegment[i]),
- CR_AREF(chansegment[i]),
- CR_CHAN(chanlist[i % seglen]),
- CR_RANGE(chanlist[i % seglen]),
- CR_AREF(chansegment[i % seglen]));
+ printk(KERN_WARNING
+ "comedi%d: pcl816: bad channel or range"
+ " number! chanlist[%i]=%d,%d,%d and not"
+ " %d,%d,%d!\n", dev->minor, i,
+ CR_CHAN(chansegment[i]),
+ CR_RANGE(chansegment[i]),
+ CR_AREF(chansegment[i]),
+ CR_CHAN(chanlist[i % seglen]),
+ CR_RANGE(chanlist[i % seglen]),
+ CR_AREF(chansegment[i % seglen]));
return 0; /* chan/gain list is strange */
}
}
@@ -965,12 +1015,15 @@ setup_channel_list(struct comedi_device *dev,
for (i = 0; i < seglen; i++) { /* store range list to card */
devpriv->ai_act_chanlist[i] = CR_CHAN(chanlist[i]);
outb(CR_CHAN(chanlist[0]) & 0xf, dev->iobase + PCL816_MUX);
- outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE); /* select gain */
+ /* select gain */
+ outb(CR_RANGE(chanlist[0]), dev->iobase + PCL816_RANGE);
}
udelay(1);
-
- outb(devpriv->ai_act_chanlist[0] | (devpriv->ai_act_chanlist[seglen - 1] << 4), dev->iobase + PCL816_MUX); /* select channel interval to scan */
+ /* select channel interval to scan */
+ outb(devpriv->ai_act_chanlist[0] |
+ (devpriv->ai_act_chanlist[seglen - 1] << 4),
+ dev->iobase + PCL816_MUX);
}
#ifdef unused
@@ -998,11 +1051,11 @@ static int set_rtc_irq_bit(unsigned char bit)
save_flags(flags);
cli();
val = CMOS_READ(RTC_CONTROL);
- if (bit) {
+ if (bit)
val |= RTC_PIE;
- } else {
+ else
val &= ~RTC_PIE;
- }
+
CMOS_WRITE(val, RTC_CONTROL);
CMOS_READ(RTC_INTR_FLAGS);
restore_flags(flags);
@@ -1072,7 +1125,7 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
dev->iobase = iobase;
if (pcl816_check(iobase)) {
- printk(", I cann't detect board. FAIL!\n");
+ printk(KERN_ERR ", I cann't detect board. FAIL!\n");
return -EIO;
}
@@ -1090,30 +1143,29 @@ static int pcl816_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
printk
- (", IRQ %u is out of allowed range, DISABLING IT",
- irq);
+ (", IRQ %u is out of allowed range, "
+ "DISABLING IT", irq);
irq = 0; /* Bad IRQ */
} else {
if (request_irq
(irq, interrupt_pcl816, 0, "pcl816", dev)) {
printk
- (", unable to allocate IRQ %u, DISABLING IT",
- irq);
+ (", unable to allocate IRQ %u, "
+ "DISABLING IT", irq);
irq = 0; /* Can't use IRQ */
} else {
- printk(", irq=%u", irq);
+ printk(KERN_INFO ", irq=%u", irq);
}
}
}
}
dev->irq = irq;
- if (irq) {
+ if (irq) /* 1=we have allocated irq */
devpriv->irq_free = 1;
- } /* 1=we have allocated irq */
- else {
+ else
devpriv->irq_free = 0;
- }
+
devpriv->irq_blocked = 0; /* number of subdevice which use IRQ */
devpriv->int816_mode = 0; /* mode of irq */
@@ -1170,18 +1222,22 @@ no_rtc:
}
ret = request_dma(dma, "pcl816");
if (ret) {
- printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ printk(KERN_ERR
+ ", unable to allocate DMA %u, FAIL!\n", dma);
return -EBUSY; /* DMA isn't free */
}
devpriv->dma = dma;
- printk(", dma=%u", dma);
+ printk(KERN_INFO ", dma=%u", dma);
pages = 2; /* we need 16KB */
devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[0]) {
printk(", unable to allocate DMA buffer, FAIL!\n");
- /* maybe experiment with try_to_free_pages() will help .... */
+ /*
+ * maybe experiment with try_to_free_pages()
+ * will help ....
+ */
return -EBUSY; /* no buffer :-( */
}
devpriv->dmapages[0] = pages;
@@ -1192,8 +1248,9 @@ no_rtc:
if (devpriv->dma_rtc == 0) { /* we must do duble buff :-( */
devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[1]) {
- printk
- (", unable to allocate DMA buffer, FAIL!\n");
+ printk(KERN_ERR
+ ", unable to allocate DMA buffer, "
+ "FAIL!\n");
return -EBUSY;
}
devpriv->dmapages[1] = pages;
@@ -1277,7 +1334,7 @@ case COMEDI_SUBD_DO:
*/
static int pcl816_detach(struct comedi_device *dev)
{
- DEBUG(printk("comedi%d: pcl816: remove\n", dev->minor);)
+ DEBUG(printk(KERN_INFO "comedi%d: pcl816: remove\n", dev->minor);)
free_resources(dev);
#ifdef unused
if (devpriv->dma_rtc)
--
1.5.4.3