Driver should call disable_pci_device() if it returns from pci_probe()
with error.
Signed-off-by: Kulikov Vasiliy <[email protected]>
---
drivers/char/mxser.c | 16 +++++++++++-----
1 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3fc89da..79009e2 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -2555,7 +2555,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 2);
retval = pci_request_region(pdev, 2, "mxser(IO)");
if (retval)
- goto err;
+ goto err_disable;
brd->info = &mxser_cards[ent->driver_data];
for (i = 0; i < brd->info->nports; i++)
@@ -2564,8 +2564,11 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
/* vector */
ioaddress = pci_resource_start(pdev, 3);
retval = pci_request_region(pdev, 3, "mxser(vector)");
- if (retval)
- goto err_relio;
+ if (retval) {
+ pci_release_region(pdev, 2);
+ brd->info = NULL;
+ goto err_release;
+ }
brd->vector = ioaddress;
/* irq */
@@ -2616,10 +2619,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, brd);
return 0;
-err_relio:
- pci_release_region(pdev, 2);
err_null:
brd->info = NULL;
+ pci_release_region(pdev, 2);
+err_release:
+ pci_release_region(pdev, 3);
+err_disable:
+ pci_disable_device(pdev);
err:
return retval;
#else
--
1.7.0.4
On 08/09/2010 09:49 PM, Kulikov Vasiliy wrote:
> --- a/drivers/char/mxser.c
> +++ b/drivers/char/mxser.c
> @@ -2564,8 +2564,11 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
> /* vector */
> ioaddress = pci_resource_start(pdev, 3);
> retval = pci_request_region(pdev, 3, "mxser(vector)");
> - if (retval)
> - goto err_relio;
> + if (retval) {
> + pci_release_region(pdev, 2);
> + brd->info = NULL;
> + goto err_release;
> + }
Hi, I'm still not happy with this patch. First, it omits mxser_remove,
where pci_disable_device is not called too. Second, the fail-paths tail
should be reorganized so that we can jump there appropriately. I'll
reply with my version of the patch, if you don't mind.
thanks,
--
js
Vasiliy found that pci_disable_device is not called on fail paths in
mxser_probe. Actually, it is called from nowhere in the driver.
There are three changes needed:
1) don't use pseudo-generic mxser_release_res. Let's use it only from
ISA paths from now on. All the pci stuff is moved to probe and
remove PCI-related functions.
2) reorder fail-paths in the probe function so that it makes sense and
we can call them from the sequential code naturally (the further we
are the earlier label we go to).
3) add pci_disable_device both to mxser_probe and mxser_remove.
There is a nit of adding CONFIG_PCI ifdef to mxser_remove. it is
because this driver supports ISA-only compilations and it would choke
up on the newly added calls now.
Signed-off-by: Jiri Slaby <[email protected]>
Cc: Kulikov Vasiliy <[email protected]>
---
drivers/char/mxser.c | 47 ++++++++++++++++++++++-------------------------
1 files changed, 22 insertions(+), 25 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3fc89da..8723f72 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -2339,20 +2339,11 @@ struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
-static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
- unsigned int irq)
+static void mxser_release_ISA_res(struct mxser_board *brd);
{
- if (irq)
- free_irq(brd->irq, brd);
- if (pdev != NULL) { /* PCI */
-#ifdef CONFIG_PCI
- pci_release_region(pdev, 2);
- pci_release_region(pdev, 3);
-#endif
- } else {
- release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- release_region(brd->vector, 1);
- }
+ free_irq(brd->irq, brd);
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ release_region(brd->vector, 1);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2397,13 +2388,11 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
brd);
- if (retval) {
+ if (retval)
printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
"conflict with another device.\n",
brd->info->name, brd->irq);
- /* We hold resources, we need to release them. */
- mxser_release_res(brd, pdev, 0);
- }
+
return retval;
}
@@ -2555,7 +2544,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 2);
retval = pci_request_region(pdev, 2, "mxser(IO)");
if (retval)
- goto err;
+ goto err_dis;
brd->info = &mxser_cards[ent->driver_data];
for (i = 0; i < brd->info->nports; i++)
@@ -2565,7 +2554,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 3);
retval = pci_request_region(pdev, 3, "mxser(vector)");
if (retval)
- goto err_relio;
+ goto err_zero;
brd->vector = ioaddress;
/* irq */
@@ -2608,7 +2597,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
/* mxser_initbrd will hook ISR. */
retval = mxser_initbrd(brd, pdev);
if (retval)
- goto err_null;
+ goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
@@ -2616,10 +2605,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, brd);
return 0;
-err_relio:
- pci_release_region(pdev, 2);
-err_null:
+err_rel3:
+ pci_release_region(pdev, 3);
+err_zero:
brd->info = NULL;
+ pci_release_region(pdev, 2);
+err_dis:
+ pci_disable_device(pdev);
err:
return retval;
#else
@@ -2629,14 +2621,19 @@ err:
static void __devexit mxser_remove(struct pci_dev *pdev)
{
+#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < brd->info->nports; i++)
tty_unregister_device(mxvar_sdriver, brd->idx + i);
- mxser_release_res(brd, pdev, 1);
+ free_irq(pdev->irq);
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 3);
+ pci_disable_device(pdev);
brd->info = NULL;
+#endif
}
static struct pci_driver mxser_driver = {
@@ -2741,7 +2738,7 @@ static void __exit mxser_module_exit(void)
for (i = 0; i < MXSER_BOARDS; i++)
if (mxser_boards[i].info != NULL)
- mxser_release_res(&mxser_boards[i], NULL, 1);
+ mxser_release_ISA_res(&mxser_boards[i]);
}
module_init(mxser_module_init);
--
1.7.2.1
Sorry, I forgot to commit --amend.
--
Vasiliy found that pci_disable_device is not called on fail paths in
mxser_probe. Actually, it is called from nowhere in the driver.
There are three changes needed:
1) don't use pseudo-generic mxser_release_res. Let's use it only from
ISA paths from now on. All the pci stuff is moved to probe and
remove PCI-related functions.
2) reorder fail-paths in the probe function so that it makes sense and
we can call them from the sequential code naturally (the further we
are the earlier label we go to).
3) add pci_disable_device both to mxser_probe and mxser_remove.
There is a nit of adding CONFIG_PCI ifdef to mxser_remove. it is
because this driver supports ISA-only compilations and it would choke
up on the newly added calls now.
Signed-off-by: Jiri Slaby <[email protected]>
Cc: Kulikov Vasiliy <[email protected]>
---
drivers/char/mxser.c | 47 ++++++++++++++++++++++-------------------------
1 files changed, 22 insertions(+), 25 deletions(-)
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 3fc89da..9d243de 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -2339,20 +2339,11 @@ struct tty_port_operations mxser_port_ops = {
* The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
-static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
- unsigned int irq)
+static void mxser_release_ISA_res(struct mxser_board *brd)
{
- if (irq)
- free_irq(brd->irq, brd);
- if (pdev != NULL) { /* PCI */
-#ifdef CONFIG_PCI
- pci_release_region(pdev, 2);
- pci_release_region(pdev, 3);
-#endif
- } else {
- release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
- release_region(brd->vector, 1);
- }
+ free_irq(brd->irq, brd);
+ release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
+ release_region(brd->vector, 1);
}
static int __devinit mxser_initbrd(struct mxser_board *brd,
@@ -2397,13 +2388,11 @@ static int __devinit mxser_initbrd(struct mxser_board *brd,
retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
brd);
- if (retval) {
+ if (retval)
printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
"conflict with another device.\n",
brd->info->name, brd->irq);
- /* We hold resources, we need to release them. */
- mxser_release_res(brd, pdev, 0);
- }
+
return retval;
}
@@ -2555,7 +2544,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 2);
retval = pci_request_region(pdev, 2, "mxser(IO)");
if (retval)
- goto err;
+ goto err_dis;
brd->info = &mxser_cards[ent->driver_data];
for (i = 0; i < brd->info->nports; i++)
@@ -2565,7 +2554,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
ioaddress = pci_resource_start(pdev, 3);
retval = pci_request_region(pdev, 3, "mxser(vector)");
if (retval)
- goto err_relio;
+ goto err_zero;
brd->vector = ioaddress;
/* irq */
@@ -2608,7 +2597,7 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
/* mxser_initbrd will hook ISR. */
retval = mxser_initbrd(brd, pdev);
if (retval)
- goto err_null;
+ goto err_rel3;
for (i = 0; i < brd->info->nports; i++)
tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
@@ -2616,10 +2605,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, brd);
return 0;
-err_relio:
- pci_release_region(pdev, 2);
-err_null:
+err_rel3:
+ pci_release_region(pdev, 3);
+err_zero:
brd->info = NULL;
+ pci_release_region(pdev, 2);
+err_dis:
+ pci_disable_device(pdev);
err:
return retval;
#else
@@ -2629,14 +2621,19 @@ err:
static void __devexit mxser_remove(struct pci_dev *pdev)
{
+#ifdef CONFIG_PCI
struct mxser_board *brd = pci_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < brd->info->nports; i++)
tty_unregister_device(mxvar_sdriver, brd->idx + i);
- mxser_release_res(brd, pdev, 1);
+ free_irq(pdev->irq, brd);
+ pci_release_region(pdev, 2);
+ pci_release_region(pdev, 3);
+ pci_disable_device(pdev);
brd->info = NULL;
+#endif
}
static struct pci_driver mxser_driver = {
@@ -2741,7 +2738,7 @@ static void __exit mxser_module_exit(void)
for (i = 0; i < MXSER_BOARDS; i++)
if (mxser_boards[i].info != NULL)
- mxser_release_res(&mxser_boards[i], NULL, 1);
+ mxser_release_ISA_res(&mxser_boards[i]);
}
module_init(mxser_module_init);
--
1.7.2.1
On Mon, Aug 09, 2010 at 11:49:27PM +0400, Kulikov Vasiliy wrote:
> @@ -2564,8 +2564,11 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
> /* vector */
> ioaddress = pci_resource_start(pdev, 3);
> retval = pci_request_region(pdev, 3, "mxser(vector)");
> - if (retval)
> - goto err_relio;
> + if (retval) {
> + pci_release_region(pdev, 2);
> + brd->info = NULL;
> + goto err_release;
This should just be goto err_null. The original err_null had a bug that
it didn't call pci_release_region(pdev, 2); but you already fixed that.
regards,
dan carpenter
> + }
> brd->vector = ioaddress;
>
> /* irq */
> @@ -2616,10 +2619,13 @@ static int __devinit mxser_probe(struct pci_dev *pdev,
> pci_set_drvdata(pdev, brd);
>
> return 0;
> -err_relio:
> - pci_release_region(pdev, 2);
> err_null:
> brd->info = NULL;
> + pci_release_region(pdev, 2);
> +err_release:
> + pci_release_region(pdev, 3);
> +err_disable:
> + pci_disable_device(pdev);
> err:
> return retval;
> #else