From: Dinh Nguyen <[email protected]>
Add iomux, clocks, and memory map for Freescale's MX53 SoC.
Add cpu_is_mx53 function to common.h.
Add 3 more banks of gpio's to mxc_gpio_ports.
Signed-off-by: Dinh Nguyen <[email protected]>
---
arch/arm/mach-mx5/clock-mx53.c | 843 +++++++++++++++++++++++++++
arch/arm/mach-mx5/devices.c | 27 +
arch/arm/plat-mxc/include/mach/common.h | 4 +
arch/arm/plat-mxc/include/mach/iomux-mx53.h | 303 ++++++++++
arch/arm/plat-mxc/include/mach/mx53.h | 406 +++++++++++++
5 files changed, 1583 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-mx5/clock-mx53.c
create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx53.h
create mode 100644 arch/arm/plat-mxc/include/mach/mx53.h
diff --git a/arch/arm/mach-mx5/clock-mx53.c b/arch/arm/mach-mx5/clock-mx53.c
new file mode 100644
index 0000000..88b0390
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx53.c
@@ -0,0 +1,843 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk pll4_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+
+#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+ u32 reg;
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+ reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+ struct clk *m1, struct clk *m2, struct clk *m3)
+{
+ if (parent == m0)
+ return 0;
+ else if (parent == m1)
+ return 1;
+ else if (parent == m2)
+ return 2;
+ else if (parent == m3)
+ return 3;
+ else
+ BUG();
+
+ return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+ if (pll == &pll1_main_clk)
+ return MX51_DPLL1_BASE;
+ else if (pll == &pll2_sw_clk)
+ return MX51_DPLL2_BASE;
+ else if (pll == &pll3_sw_clk)
+ return MX51_DPLL3_BASE;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+ void __iomem *pllbase;
+ s64 temp;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pllbase = _get_pll_base(clk);
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ /* Sign extend to 32-bits */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xFC000000;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk = 2 * parent_rate;
+ if (dbl != 0)
+ ref_clk *= 2;
+
+ ref_clk /= (pdf + 1);
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ void __iomem *pllbase;
+
+ long mfi, pdf, mfn, mfd = 999999;
+ s64 temp64;
+ unsigned long quad_parent_rate;
+ unsigned long pll_hfsm, dp_ctl;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ pllbase = _get_pll_base(clk);
+
+ quad_parent_rate = 4 * parent_rate;
+ pdf = mfi = -1;
+ while (++pdf < 16 && mfi < 5)
+ mfi = rate * (pdf+1) / quad_parent_rate;
+ if (mfi > 15)
+ return -EINVAL;
+ pdf--;
+
+ temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate/1000000);
+ mfn = (long)temp64;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ /* use dpdck0_2 */
+ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+ } else {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+ u32 reg;
+ void __iomem *pllbase;
+ int i = 0;
+
+ pllbase = _get_pll_base(clk);
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_LRF)
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: pll locking failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+ u32 reg;
+ void __iomem *pllbase;
+
+ pllbase = _get_pll_base(clk);
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, step;
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ /* When switching from pll_main_clk to a bypass clock, first select a
+ * multiplexed clock in 'step_sel', then shift the glitchless mux
+ * 'pll1_sw_clk_sel'.
+ *
+ * When switching back, do it in reverse order
+ */
+ if (parent == &pll1_main_clk) {
+ /* Switch to pll1_main_clk */
+ reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+ __raw_writel(reg, MXC_CCM_CCSR);
+ /* step_clk mux switched to lp_apm, to save power. */
+ reg = __raw_readl(MXC_CCM_CCSR);
+ reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+ reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+ MXC_CCM_CCSR_STEP_SEL_OFFSET);
+ } else {
+ if (parent == &lp_apm_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+ } else if (parent == &pll2_sw_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+ } else if (parent == &pll3_sw_clk) {
+ step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+ } else
+ return -EINVAL;
+
+ reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+ reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+ /* Switch to step_clk */
+ reg = __raw_readl(MXC_CCM_CCSR);
+ reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+ }
+ __raw_writel(reg, MXC_CCM_CCSR);
+ return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ if (clk->parent == &pll2_sw_clk) {
+ div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+ MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+ } else if (clk->parent == &pll3_sw_clk) {
+ div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+ MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+ } else
+ div = 1;
+ return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CCSR);
+
+ if (parent == &pll2_sw_clk)
+ reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+ else
+ reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+ return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ if (parent == &osc_clk)
+ reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CCSR);
+
+ return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+ u32 cacrr, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+ cacrr = __raw_readl(MXC_CCM_CACRR);
+ div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+ return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+ int i = 0;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+ reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCMR);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(MXC_CCM_CDHIPR);
+ if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: Set parent for periph_apm clock failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+
+ if (parent == &pll2_sw_clk)
+ reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+ else if (parent == &periph_apm_clk)
+ reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+ else
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ return 0;
+}
+
+static struct clk main_bus_clk = {
+ .parent = &pll2_sw_clk,
+ .set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+ MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+ return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+ int i = 0;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+ reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+ __raw_writel(reg, MXC_CCM_CBCDR);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(MXC_CCM_CDHIPR);
+ if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: clk_ahb_set_rate failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8)
+ div = 8;
+ else if (div == 0)
+ div++;
+ return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_enable(clk);
+
+ /* Handshake with MAX when LPM is entered. */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+
+ return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+ u32 reg;
+
+ _clk_ccgr_disable_inwait(clk);
+
+ /* No Handshake with MAX when LPM is entered as its disabled. */
+ reg = __raw_readl(MXC_CCM_CLPCR);
+ reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+ __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+ u32 reg, div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+ MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+ return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+ u32 reg, prediv1, prediv2, podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+ /* the main_bus_clk is the one before the DVFS engine */
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+ prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+ podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+ MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+ return parent_rate / (prediv1 * prediv2 * podf);
+ } else if (clk->parent == &ipg_clk)
+ return parent_rate;
+ else
+ BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg;
+
+ reg = __raw_readl(MXC_CCM_CBCMR);
+
+ reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+ reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+ if (parent == &ipg_clk)
+ reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+ else if (parent == &lp_apm_clk)
+ reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+ else if (parent != &main_bus_clk)
+ return -EINVAL;
+
+ __raw_writel(reg, MXC_CCM_CBCMR);
+
+ return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+ u32 reg, prediv, podf;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ reg = __raw_readl(MXC_CCM_CSCDR1);
+ prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+ MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+ podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+ MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+ return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 reg, mux;
+
+ mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+ &lp_apm_clk);
+ reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+ reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+ __raw_writel(reg, MXC_CCM_CSCMR1);
+
+ return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+ return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+ return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+ .get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+ .get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+ .parent = &osc_clk,
+ .get_rate = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ * CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ * | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+ .parent = &pll1_main_clk,
+ .set_parent = _clk_pll1_sw_set_parent,
+ .get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+ .parent = &osc_clk,
+ .get_rate = clk_pll_get_rate,
+ .set_rate = _clk_pll_set_rate,
+ .set_parent = _clk_pll2_sw_set_parent,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+ .parent = &osc_clk,
+ .set_rate = _clk_pll_set_rate,
+ .get_rate = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
+static struct clk pll4_sw_clk = {
+ .parent = &osc_clk,
+ .set_rate = _clk_pll_set_rate,
+ .recalc = clk_pll_get_rate,
+ .enable = _clk_pll_enable,
+ .disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+ .parent = &osc_clk,
+ .set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+ .parent = &pll1_sw_clk,
+ .set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+ .parent = &pll1_sw_clk,
+ .get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+ .parent = &main_bus_clk,
+ .get_rate = clk_ahb_get_rate,
+ .set_rate = _clk_ahb_set_rate,
+ .round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+ .parent = &ahb_clk,
+ .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+ .parent = &lp_apm_clk,
+ .get_rate = clk_ipg_per_get_rate,
+ .set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+ .parent = &pll2_sw_clk,
+ .get_rate = clk_uart_get_rate,
+ .set_parent = _clk_uart_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+ .parent = &ahb_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+ .enable = _clk_max_enable,
+ .disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+ .parent = &ahb_clk,
+ .secondary = &ahb_max_clk,
+ .enable_reg = MXC_CCM_CCGR0,
+ .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+ .enable = _clk_ccgr_enable,
+ .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+ .id = 0,
+ .parent = &ckil_clk,
+};
+
+static struct clk kpp_clk = {
+ .id = 0,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = _clk_ccgr_enable, \
+ .disable = _clk_ccgr_disable, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+ get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+ NULL, NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+ NULL, NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+ NULL, NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+};
+
+static void clk_tree_init(void)
+{
+ u32 reg;
+
+ ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+ /*
+ * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+ * 8MHz, its derived from lp_apm.
+ *
+ * FIXME: Verify if true for all boards
+ */
+ reg = __raw_readl(MXC_CCM_CBCDR);
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+ reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+ reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+ __raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2)
+{
+ int i;
+
+ external_low_reference = ckil;
+ external_high_reference = ckih1;
+ ckih2_reference = ckih2;
+ oscillator_reference = osc;
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ clk_tree_init();
+
+ clk_enable(&cpu_clk);
+ clk_enable(&main_bus_clk);
+
+ /* set the usboh3_clk parent to pll2_sw_clk */
+ clk_set_parent(&usboh3_clk, &pll2_sw_clk);
+
+ /* System timer */
+ mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
+ MX53_MXC_INT_GPT);
+ return 0;
+}
+
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 4c7be87..99aa13d 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -160,9 +160,36 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
.irq_high = MX51_MXC_INT_GPIO4_HIGH,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
},
+ {
+ .chip.label = "gpio-4",
+ .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
+ .irq = MX53_MXC_INT_GPIO5_LOW,
+ .irq_high = MX53_MXC_INT_GPIO5_HIGH,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
+ },
+ {
+ .chip.label = "gpio-5",
+ .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
+ .irq = MX53_MXC_INT_GPIO6_LOW,
+ .irq_high = MX53_MXC_INT_GPIO6_HIGH,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
+ },
+ {
+ .chip.label = "gpio-6",
+ .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
+ .irq = MX53_MXC_INT_GPIO7_LOW,
+ .irq_high = MX53_MXC_INT_GPIO7_HIGH,
+ .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
+ },
};
int __init imx51_register_gpios(void)
{
+ return mxc_gpio_init(mxc_gpio_ports, 4);
+}
+
+int __init imx53_register_gpios(void)
+{
return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
}
+
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7a1e1f8..2919052 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -21,6 +21,7 @@ extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
extern void mx51_map_io(void);
+extern void mx53_map_io(void);
extern void mxc91231_map_io(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
@@ -31,6 +32,7 @@ extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
extern void mx51_init_irq(void);
+extern void mx53_init_irq(void);
extern void mxc91231_init_irq(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
@@ -42,6 +44,8 @@ extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
+ unsigned long ckih1, unsigned long ckih2);
extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
new file mode 100644
index 0000000..9446f41
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_IOMUX_MX53_H__
+#define __MACH_IOMUX_MX53_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+ IOMUX_CONFIG_ALT0,
+ IOMUX_CONFIG_ALT1,
+ IOMUX_CONFIG_ALT2,
+ IOMUX_CONFIG_ALT3,
+ IOMUX_CONFIG_ALT4,
+ IOMUX_CONFIG_ALT5,
+ IOMUX_CONFIG_ALT6,
+ IOMUX_CONFIG_ALT7,
+ IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
+ IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* These 2 defines are for pins that may not have a mux register, but could
+ * have a pad setting register, and vice-versa. */
+#define NON_MUX_I 0x00
+#define NON_PAD_I 0x00
+
+#define MX53_PAD_GPIO_19__GPIO_4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__GPIO_4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__GPIO_4_7 IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__GPIO_4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__GPIO_4_9 IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__GPIO_4_10 IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__GPIO_4_11 IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__GPIO_4_12 IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__GPIO_4_13 IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__GPIO_4_14 IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__GPIO_4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD IOMUX_PAD(0x374, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16 IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__GPIO_4_17 IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__GPIO_4_18 IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__GPIO_4_19 IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__GPIO_4_20 IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__GPIO_4_21 IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__GPIO_4_22 IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__GPIO_4_23 IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__GPIO_4_24 IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__GPIO_4_25 IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__GPIO_4_26 IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__GPIO_4_27 IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__GPIO_4_28 IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__GPIO_4_29 IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__GPIO_4_30 IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__GPIO_4_31 IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__GPIO_5_5 IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__GPIO_5_6 IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__GPIO_5_7 IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__GPIO_5_8 IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__GPIO_5_9 IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__GPIO_5_10 IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__GPIO_5_11 IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__GPIO_5_12 IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__GPIO_5_13 IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__GPIO_5_14 IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__GPIO_5_15 IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__GPIO_5_16 IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__GPIO_5_17 IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18 IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__GPIO_5_19 IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20 IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__GPIO_5_21 IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D4__GPIO_5_22 IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D5__GPIO_5_23 IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D6__GPIO_5_24 IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D7__GPIO_5_25 IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D8__GPIO_5_26 IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D9__GPIO_5_27 IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D10__GPIO_5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D11__GPIO_5_29 IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D12__GPIO_5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D13__GPIO_5_31 IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D14__GPIO_6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D15__GPIO_6_1 IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D16__GPIO_6_2 IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D17__GPIO_6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D18__GPIO_6_4 IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D19__GPIO_6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_CSI0__NVCC_CSI0 IOMUX_PAD(0x43C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TMS__JTAG_TMS IOMUX_PAD(0x440, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_MOD__JTAG_MOD IOMUX_PAD(0x444, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB IOMUX_PAD(0x448, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TDI__JTAG_TDI IOMUX_PAD(0x44C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TCK__JTAG_TCK IOMUX_PAD(0x450, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TDO__JTAG_TDO IOMUX_PAD(0x454, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__GPIO_5_2 IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__GPIO_2_30 IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO_3_16 IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO_3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO_3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__GPIO_3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__GPIO_3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__GPIO_3_21 IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__GPIO_3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__GPIO_3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__GPIO_2_31 IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__GPIO_3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__GPIO_3_25 IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__GPIO_3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__GPIO_3_27 IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__GPIO_3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__GPIO_3_29 IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__GPIO_3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__GPIO_3_31 IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM1__NVCC_EIM1 IOMUX_PAD(0x4A4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__GPIO_5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__GPIO_6_6 IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__GPIO_2_16 IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__GPIO_2_17 IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__GPIO_2_18 IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__GPIO_2_19 IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__GPIO_2_20 IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__GPIO_2_21 IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__GPIO_2_22 IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__GPIO_2_23 IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__GPIO_2_24 IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__GPIO_2_25 IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__GPIO_2_26 IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__GPIO_2_27 IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM4__NVCC_EIM4 IOMUX_PAD(0x4E0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPIO_2_28 IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__GPIO_2_29 IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__GPIO_3_0 IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__GPIO_3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__GPIO_3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__GPIO_3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__GPIO_3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__GPIO_3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__GPIO_3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__GPIO_3_7 IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__GPIO_3_8 IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__GPIO_3_9 IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__GPIO_3_10 IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__GPIO_3_11 IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__GPIO_3_12 IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__GPIO_3_13 IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__GPIO_3_14 IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__GPIO_3_15 IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__GPIO_6_12 IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__GPIO_6_13 IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__GPIO_5_0 IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_BCLK__EIM_BCLK IOMUX_PAD(0x538, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM7__NVCC_EIM7 IOMUX_PAD(0x53C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22 IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24 IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26 IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28 IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30 IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__GPIO_4_0 IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_11__GPIO_4_1 IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_12__GPIO_4_2 IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_13__GPIO_4_3 IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_14__GPIO_4_4 IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM3__DRAM_DQM3 IOMUX_PAD(0x554, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3 IOMUX_PAD(0x558, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1 IOMUX_PAD(0x55C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM2__DRAM_DQM2 IOMUX_PAD(0x560, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1 IOMUX_PAD(0x564, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2 IOMUX_PAD(0x568, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_RESET__DRAM_RESET IOMUX_PAD(0x56C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1 IOMUX_PAD(0x570, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_CAS__DRAM_CAS IOMUX_PAD(0x574, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0 IOMUX_PAD(0x578, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0 IOMUX_PAD(0x57C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0 IOMUX_PAD(0x580, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM0__DRAM_DQM0 IOMUX_PAD(0x584, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_RAS__DRAM_RAS IOMUX_PAD(0x588, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0 IOMUX_PAD(0x58C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1 IOMUX_PAD(0x590, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM1__DRAM_DQM1 IOMUX_PAD(0x594, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ IOMUX_PAD(0x598, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ IOMUX_PAD(0x59C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__GPIO_6_7 IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__GPIO_6_8 IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__GPIO_6_9 IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__GPIO_6_10 IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__GPIO_6_11 IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__GPIO_6_14 IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__GPIO_6_15 IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__GPIO_6_16 IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_NANDF__NVCC_NANDF IOMUX_PAD(0x5C0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__GPIO_1_22 IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__GPIO_1_23 IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__GPIO_1_24 IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__GPIO_1_25 IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__GPIO_1_26 IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__GPIO_1_27 IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__GPIO_1_28 IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__GPIO_1_29 IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__GPIO_1_30 IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__GPIO_1_31 IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_FEC__NVCC_FEC IOMUX_PAD(0x5EC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DIOW__GPIO_6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DMACK__GPIO_6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DMARQ__GPIO_7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1 IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_INTRQ__GPIO_7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DIOR__GPIO_7_3 IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_RESET_B__GPIO_7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_IORDY__GPIO_7_5 IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_0__GPIO_7_6 IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_1__GPIO_7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_2__GPIO_7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_CS_0__GPIO_7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_CS_1__GPIO_7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_ATA2__NVCC_ATA2 IOMUX_PAD(0x624, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA0__GPIO_2_0 IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA1__GPIO_2_1 IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA2__GPIO_2_2 IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA3__GPIO_2_3 IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA4__GPIO_2_4 IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA5__GPIO_2_5 IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA6__GPIO_2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA7__GPIO_2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA8__GPIO_2_8 IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA9__GPIO_2_9 IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA10__GPIO_2_10 IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA11__GPIO_2_11 IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA12__GPIO_2_12 IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA13__GPIO_2_13 IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA14__GPIO_2_14 IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA15__GPIO_2_15 IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_ATA0__NVCC_ATA0 IOMUX_PAD(0x668, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPIO_1_16 IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPIO_1_17 IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPIO_1_18 IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPIO_1_19 IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPIO_1_20 IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPIO_1_21 IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_SD1__NVCC_SD1 IOMUX_PAD(0x684, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__GPIO_1_10 IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__GPIO_1_11 IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__GPIO_1_12 IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__GPIO_1_13 IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__GPIO_1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__GPIO_1_15 IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_SD2__NVCC_SD2 IOMUX_PAD(0x6A0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__GPIO_1_0 IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__GPIO_1_1 IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__GPIO_1_9 IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__GPIO_1_3 IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__GPIO_1_6 IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__GPIO_1_2 IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__GPIO_1_4 IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__GPIO_1_5 IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__GPIO_1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__GPIO_1_8 IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__GPIO_7_11 IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPIO_7_12 IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__GPIO_7_13 IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_GPIO__NVCC_GPIO IOMUX_PAD(0x6D8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_POR_B__POR_B IOMUX_PAD(0x6DC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x6E0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_RESET_IN_B__RESET_IN_B IOMUX_PAD(0x6E4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x6E8, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_TEST_MODE__TEST_MODE IOMUX_PAD(0x6EC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_ADDDS__GRP_ADDDS IOMUX_PAD(0x6F0, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL IOMUX_PAD(0x6F4, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE IOMUX_PAD(0x6FC, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRPK__GRP_DDRPK IOMUX_PAD(0x708, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3 IOMUX_PAD(0x70C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS IOMUX_PAD(0x710, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE IOMUX_PAD(0x714, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B0DS__GRP_B0DS IOMUX_PAD(0x718, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B1DS__GRP_B1DS IOMUX_PAD(0x71C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_CTLDS__GRP_CTLDS IOMUX_PAD(0x720, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE IOMUX_PAD(0x724, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B2DS__GRP_B2DS IOMUX_PAD(0x728, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B3DS__GRP_B3DS IOMUX_PAD(0x72C, NON_MUX_I, 0, 0x0, 0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
new file mode 100644
index 0000000..51714fa
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -0,0 +1,406 @@
+#ifndef __MACH_MX53_H__
+#define __MACH_MX53_H__
+
+/*
+ * IROM
+ */
+#define MX53_IROM_BASE_ADDR 0x0
+#define MX53_IROM_SIZE SZ_64K
+
+/* TZIC */
+#define MX53_TZIC_BASE_ADDR 0x0FFFC000
+
+/*
+ * AHCI SATA
+ */
+#define MX53_SATA_BASE_ADDR 0x10000000
+
+/*
+ * NFC
+ */
+#define MX53_NFC_BASE_ADDR_AXI 0xF7FF0000 /* NAND flash AXI */
+#define MX53_NFC_AXI_SIZE SZ_64K
+
+/*
+ * IRAM
+ */
+#define MX53_IRAM_BASE_ADDR 0xF8000000 /* internal ram */
+#define MX53_IRAM_PARTITIONS 16
+#define MX53_IRAM_SIZE (IRAM_PARTITIONS * SZ_8K) /* 128KB */
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX53_IPU_CTRL_BASE_ADDR 0x18000000
+#define MX53_GPU2D_BASE_ADDR 0x20000000
+#define MX53_GPU_BASE_ADDR 0x30000000
+#define MX53_GPU_GMEM_BASE_ADDR 0xF8020000
+
+#define MX53_DEBUG_BASE_ADDR 0x40000000
+#define MX53_DEBUG_BASE_ADDR_VIRT 0xFA200000
+#define MX53_DEBUG_SIZE SZ_1M
+#define MX53_ETB_BASE_ADDR (DEBUG_BASE_ADDR + 0x00001000)
+#define MX53_ETM_BASE_ADDR (DEBUG_BASE_ADDR + 0x00002000)
+#define MX53_TPIU_BASE_ADDR (DEBUG_BASE_ADDR + 0x00003000)
+#define MX53_CTI0_BASE_ADDR (DEBUG_BASE_ADDR + 0x00004000)
+#define MX53_CTI1_BASE_ADDR (DEBUG_BASE_ADDR + 0x00005000)
+#define MX53_CTI2_BASE_ADDR (DEBUG_BASE_ADDR + 0x00006000)
+#define MX53_CTI3_BASE_ADDR (DEBUG_BASE_ADDR + 0x00007000)
+#define MX53_CORTEX_DBG_BASE_ADDR (DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX53_SPBA0_BASE_ADDR 0x50000000
+#define MX53_SPBA0_BASE_ADDR_VIRT 0xFB100000
+#define MX53_SPBA0_SIZE SZ_1M
+
+#define MX53_MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
+#define MX53_MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
+#define MX53_UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
+#define MX53_CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
+#define MX53_SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
+#define MX53_MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
+#define MX53_MMC_SDHC4_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
+#define MX53_SPDIF_BASE_ADDR (SPBA0_BASE_ADDR + 0x00028000)
+#define MX53_ASRC_BASE_ADDR (SPBA0_BASE_ADDR + 0x0002C000)
+#define MX53_ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00030000)
+#define MX53_SLIM_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00034000)
+#define MX53_HSI2C_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00038000)
+#define MX53_SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 1
+ */
+#define MX53_AIPS1_BASE_ADDR 0x53F00000
+#define MX53_AIPS1_BASE_ADDR_VIRT 0xFB000000
+#define MX53_AIPS1_SIZE SZ_1M
+
+#define MX53_OTG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00080000)
+#define MX53_GPIO1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00084000)
+#define MX53_GPIO2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00088000)
+#define MX53_GPIO3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX53_GPIO4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00090000)
+#define MX53_KPP_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00094000)
+#define MX53_WDOG_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x00098000)
+#define MX53_WDOG2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX53_GPT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX53_SRTC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX53_IOMUXC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX53_EPIT1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX53_EPIT2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX53_PWM1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX53_PWM2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX53_UART1_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX53_UART2_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX53_SRC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX53_CCM_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX53_GPC_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX53_GPIO5_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000DC000)
+#define MX53_GPIO6_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E0000)
+#define MX53_GPIO7_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E4000)
+#define MX53_ATA_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000E8000)
+#define MX53_I2C3_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000EC000)
+#define MX53_UART4_BASE_ADDR (MX53_AIPS1_BASE_ADDR + 0x000F0000)
+
+/*
+ * AIPS 2
+ */
+#define MX53_AIPS2_BASE_ADDR 0x63F00000
+#define MX53_AIPS2_BASE_ADDR_VIRT 0xFB200000
+#define MX53_AIPS2_SIZE SZ_1M
+
+#define MX53_PLL1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00080000)
+#define MX53_PLL2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00084000)
+#define MX53_PLL3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00088000)
+#define MX53_PLL4_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0008C000)
+#define MX53_UART5_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00090000)
+#define MX53_AHBMAX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00094000)
+#define MX53_IIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x00098000)
+#define MX53_CSU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX53_ARM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX53_OWIRE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX53_FIRI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX53_CSPI2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX53_SDMA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX53_SCC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX53_ROMCP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX53_RTIC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX53_CSPI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX53_I2C2_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX53_I2C1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX53_SSI1_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX53_AUDMUX_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX53_RTC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D4000)
+#define MX53_M4IF_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX53_ESDCTL_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX53_WEIM_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX53_NFC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX53_EMI_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX53_MIPI_HSC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX53_MLB_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX53_SSI3_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX53_MXC_FEC_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX53_TVE_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX53_VPU_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX53_SAHARA_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000F8000)
+#define MX53_PTP_BASE_ADDR (MX53_AIPS2_BASE_ADDR + 0x000FC000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX53_CSD0_BASE_ADDR 0x90000000
+#define MX53_CSD1_BASE_ADDR 0xA0000000
+#define MX53_CS0_BASE_ADDR 0xB0000000
+#define MX53_CS1_BASE_ADDR 0xB8000000
+#define MX53_CS2_BASE_ADDR 0xC0000000
+#define MX53_CS3_BASE_ADDR 0xC8000000
+#define MX53_CS4_BASE_ADDR 0xCC000000
+#define MX53_CS5_BASE_ADDR 0xCE000000
+
+#define MX53_IO_ADDRESS(x) ( \
+ IMX_IO_ADDRESS(x, MX53_SPBA0) ?: \
+ IMX_IO_ADDRESS(x, MX53_AIPS1) ?: \
+ IMX_IO_ADDRESS(x, MX53_AIPS2))
+
+/* This is currently used in <mach/debug-macro.S>, but should go away */
+#define MX53_AIPS1_IO_ADDRESS(x) \
+ (((x) - MX53_AIPS1_BASE_ADDR) + MX53_AIPS1_BASE_ADDR_VIRT)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX53_SPBA_SDHC1 0x04
+#define MX53_SPBA_SDHC2 0x08
+#define MX53_SPBA_UART3 0x0C
+#define MX53_SPBA_CSPI1 0x10
+#define MX53_SPBA_SSI2 0x14
+#define MX53_SPBA_SDHC3 0x20
+#define MX53_SPBA_SDHC4 0x24
+#define MX53_SPBA_SPDIF 0x28
+#define MX53_SPBA_ATA 0x30
+#define MX53_SPBA_SLIM 0x34
+#define MX53_SPBA_HSI2C 0x38
+#define MX53_SPBA_CTRL 0x3C
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX53_MXC_DMA_CHANNEL_IRAM 30
+#define MX53_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX53_MXC_DMA_CHANNEL_SSI2_TX (MXC_DMA_CHANNEL_IRAM + 1)
+#else /*CONFIG_SDMA_IRAM */
+#define MX53_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#endif /*CONFIG_SDMA_IRAM */
+#define MX53_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
+#define MX53_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
+
+#define MX53_IS_MEM_DEVICE_NONSHARED(x) 0
+
+/*
+ * DMA request assignments
+ */
+#define MX53_DMA_REQ_SSI3_TX1 47
+#define MX53_DMA_REQ_SSI3_RX1 46
+#define MX53_DMA_REQ_SSI3_TX2 45
+#define MX53_DMA_REQ_SSI3_RX2 44
+#define MX53_DMA_REQ_UART3_TX 43
+#define MX53_DMA_REQ_UART3_RX 42
+#define MX53_DMA_REQ_ESAI_TX 41
+#define MX53_DMA_REQ_ESAI_RX 40
+#define MX53_DMA_REQ_CSPI_TX 39
+#define MX53_DMA_REQ_CSPI_RX 38
+#define MX53_DMA_REQ_ASRC_DMA6 37
+#define MX53_DMA_REQ_ASRC_DMA5 36
+#define MX53_DMA_REQ_ASRC_DMA4 35
+#define MX53_DMA_REQ_ASRC_DMA3 34
+#define MX53_DMA_REQ_ASRC_DMA2 33
+#define MX53_DMA_REQ_ASRC_DMA1 32
+#define MX53_DMA_REQ_EMI_WR 31
+#define MX53_DMA_REQ_EMI_RD 30
+#define MX53_DMA_REQ_SSI1_TX1 29
+#define MX53_DMA_REQ_SSI1_RX1 28
+#define MX53_DMA_REQ_SSI1_TX2 27
+#define MX53_DMA_REQ_SSI1_RX2 26
+#define MX53_DMA_REQ_SSI2_TX1 25
+#define MX53_DMA_REQ_SSI2_RX1 24
+#define MX53_DMA_REQ_SSI2_TX2 23
+#define MX53_DMA_REQ_SSI2_RX2 22
+/* I2C2 is shared w/SDHC2 on MX53 */
+#define MX53_DMA_REQ_SDHC2 21
+/* I2C1 is shared w/SDHC1 on MX53 */
+#define MX53_DMA_REQ_SDHC1 20
+#define MX53_DMA_REQ_UART1_TX 19
+#define MX53_DMA_REQ_UART1_RX 18
+#define MX53_DMA_REQ_UART5_TX 17
+#define MX53_DMA_REQ_UART5_RX 16
+#define MX53_DMA_REQ_SPDIF_TX 15
+#define MX53_DMA_REQ_SPDIF_RX 14
+/* UART2 is shared w/FIRI on MX53 */
+#define MX53_DMA_REQ_FIRI_TX 13
+#define MX53_DMA_REQ_FIRI_RX 12
+#define MX53_DMA_REQ_SDHC4 11
+/* SDHC3 is shared w/I2C3 on MX53 */
+#define MX53_DMA_REQ_I2C3 10
+#define MX53_DMA_REQ_CSPI2_TX 9
+#define MX53_DMA_REQ_CSPI2_RX 8
+#define MX53_DMA_REQ_CSPI1_TX 7
+#define MX53_DMA_REQ_CSPI1_RX 6
+#define MX53_DMA_REQ_IPU 5
+#define MX53_DMA_REQ_ATA_TX_END 4
+/* UART4 is shared w/PATA on MX53 */
+#define MX53_DMA_REQ_ATA_TX 3
+/* UART4 is shared w/PATA on MX53 */
+#define MX53_DMA_REQ_ATA_RX 2
+#define MX53_DMA_REQ_GPC 1
+#define MX53_DMA_REQ_VPU 0
+
+/*
+ * Interrupt numbers
+ */
+#define MX53_MXC_INT_RESV0 0
+#define MX53_MXC_INT_MMC_SDHC1 1
+#define MX53_MXC_INT_MMC_SDHC2 2
+#define MX53_MXC_INT_MMC_SDHC3 3
+#define MX53_MXC_INT_MMC_SDHC4 4
+#define MX53_MXC_INT_RESV5 5
+#define MX53_MXC_INT_SDMA 6
+#define MX53_MXC_INT_IOMUX 7
+#define MX53_MXC_INT_NFC 8
+#define MX53_MXC_INT_VPU 9
+#define MX53_MXC_INT_IPU_ERR 10
+#define MX53_MXC_INT_IPU_SYN 11
+#define MX53_MXC_INT_GPU 12
+#define MX53_MXC_INT_RESV13 13
+#define MX53_MXC_INT_USB_H1 14
+#define MX53_MXC_INT_EMI 15
+#define MX53_MXC_INT_USB_H2 16
+#define MX53_MXC_INT_USB_H3 17
+#define MX53_MXC_INT_USB_OTG 18
+#define MX53_MXC_INT_SAHARA_H0 19
+#define MX53_MXC_INT_SAHARA_H1 20
+#define MX53_MXC_INT_SCC_SMN 21
+#define MX53_MXC_INT_SCC_STZ 22
+#define MX53_MXC_INT_SCC_SCM 23
+#define MX53_MXC_INT_SRTC_NTZ 24
+#define MX53_MXC_INT_SRTC_TZ 25
+#define MX53_MXC_INT_RTIC 26
+#define MX53_MXC_INT_CSU 27
+#define MX53_MXC_INT_SATA 28
+#define MX53_MXC_INT_SSI1 29
+#define MX53_MXC_INT_SSI2 30
+#define MX53_MXC_INT_UART1 31
+#define MX53_MXC_INT_UART2 32
+#define MX53_MXC_INT_UART3 33
+#define MX53_MXC_INT_RESV34 34
+#define MX53_MXC_INT_RESV35 35
+#define MX53_MXC_INT_CSPI1 36
+#define MX53_MXC_INT_CSPI2 37
+#define MX53_MXC_INT_CSPI 38
+#define MX53_MXC_INT_GPT 39
+#define MX53_MXC_INT_EPIT1 40
+#define MX53_MXC_INT_EPIT2 41
+#define MX53_MXC_INT_GPIO1_INT7 42
+#define MX53_MXC_INT_GPIO1_INT6 43
+#define MX53_MXC_INT_GPIO1_INT5 44
+#define MX53_MXC_INT_GPIO1_INT4 45
+#define MX53_MXC_INT_GPIO1_INT3 46
+#define MX53_MXC_INT_GPIO1_INT2 47
+#define MX53_MXC_INT_GPIO1_INT1 48
+#define MX53_MXC_INT_GPIO1_INT0 49
+#define MX53_MXC_INT_GPIO1_LOW 50
+#define MX53_MXC_INT_GPIO1_HIGH 51
+#define MX53_MXC_INT_GPIO2_LOW 52
+#define MX53_MXC_INT_GPIO2_HIGH 53
+#define MX53_MXC_INT_GPIO3_LOW 54
+#define MX53_MXC_INT_GPIO3_HIGH 55
+#define MX53_MXC_INT_GPIO4_LOW 56
+#define MX53_MXC_INT_GPIO4_HIGH 57
+#define MX53_MXC_INT_WDOG1 58
+#define MX53_MXC_INT_WDOG2 59
+#define MX53_MXC_INT_KPP 60
+#define MX53_MXC_INT_PWM1 61
+#define MX53_MXC_INT_I2C1 62
+#define MX53_MXC_INT_I2C2 63
+#define MX53_MXC_INT_I2C3 64
+#define MX53_MXC_INT_RESV65 65
+#define MX53_MXC_INT_RESV66 66
+#define MX53_MXC_INT_SPDIF 67
+#define MX53_MXC_INT_SIM_DAT 68
+#define MX53_MXC_INT_IIM 69
+#define MX53_MXC_INT_ATA 70
+#define MX53_MXC_INT_CCM1 71
+#define MX53_MXC_INT_CCM2 72
+#define MX53_MXC_INT_GPC1 73
+#define MX53_MXC_INT_GPC2 74
+#define MX53_MXC_INT_SRC 75
+#define MX53_MXC_INT_NM 76
+#define MX53_MXC_INT_PMU 77
+#define MX53_MXC_INT_CTI_IRQ 78
+#define MX53_MXC_INT_CTI1_TG0 79
+#define MX53_MXC_INT_CTI1_TG1 80
+#define MX53_MXC_INT_ESAI 81
+#define MX53_MXC_INT_CAN1 82
+#define MX53_MXC_INT_CAN2 83
+#define MX53_MXC_INT_GPU2_IRQ 84
+#define MX53_MXC_INT_GPU2_BUSY 85
+#define MX53_MXC_INT_RESV86 86
+#define MX53_MXC_INT_FEC 87
+#define MX53_MXC_INT_OWIRE 88
+#define MX53_MXC_INT_CTI1_TG2 89
+#define MX53_MXC_INT_SJC 90
+#define MX53_MXC_INT_TVE 92
+#define MX53_MXC_INT_FIRI 93
+#define MX53_MXC_INT_PWM2 94
+#define MX53_MXC_INT_SLIM_EXP 95
+#define MX53_MXC_INT_SSI3 96
+#define MX53_MXC_INT_EMI_BOOT 97
+#define MX53_MXC_INT_CTI1_TG3 98
+#define MX53_MXC_INT_SMC_RX 99
+#define MX53_MXC_INT_VPU_IDLE 100
+#define MX53_MXC_INT_EMI_NFC 101
+#define MX53_MXC_INT_GPU_IDLE 102
+#define MX53_MXC_INT_GPIO5_LOW 103
+#define MX53_MXC_INT_GPIO5_HIGH 104
+#define MX53_MXC_INT_GPIO6_LOW 105
+#define MX53_MXC_INT_GPIO6_HIGH 106
+#define MX53_MXC_INT_GPIO7_LOW 107
+#define MX53_MXC_INT_GPIO7_HIGH 108
+
+/* silicon revisions specific to i.MX53 */
+#define MX53_CHIP_REV_1_0 0x10
+#define MX53_CHIP_REV_1_1 0x11
+#define MX53_CHIP_REV_1_2 0x12
+#define MX53_CHIP_REV_1_3 0x13
+#define MX53_CHIP_REV_2_0 0x20
+#define MX53_CHIP_REV_2_1 0x21
+#define MX53_CHIP_REV_2_2 0x22
+#define MX53_CHIP_REV_2_3 0x23
+#define MX53_CHIP_REV_3_0 0x30
+#define MX53_CHIP_REV_3_1 0x31
+#define MX53_CHIP_REV_3_2 0x32
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+extern int mx53_revision(void);
+#endif
+
+#endif /* ifndef __MACH_H__ */
--
1.6.0.4
From: Dinh Nguyen <[email protected]>
Add mx53 support to cpu.c and mm.c.
Also change the method to get the silicon version from the
documented IIM SREV register instead of reading the ROM code.
Signed-off-by: Dinh Nguyen <[email protected]>
---
arch/arm/mach-mx5/cpu.c | 72 ++++++++++++++++++++++++++++++++--------------
arch/arm/mach-mx5/mm.c | 52 ++++++++++++++++++++++++++++++++--
2 files changed, 99 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index eaacb6e..a13d18b 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -20,37 +20,35 @@
static int cpu_silicon_rev = -1;
-#define SI_REV 0x48
+#define SI_REV 0x24
static void query_silicon_parameter(void)
{
- void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
+ void __iomem *iim_base;
u32 rev;
- if (!rom) {
- cpu_silicon_rev = -EINVAL;
- return;
- }
+ if (cpu_is_mx51())
+ iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
+ else if (cpu_is_mx53())
+ iim_base = MX53_IO_ADDRESS(MX53_IIM_BASE_ADDR);
- rev = readl(rom + SI_REV);
+ rev = readl(iim_base + SI_REV) & 0xff;
switch (rev) {
- case 0x1:
- cpu_silicon_rev = MX51_CHIP_REV_1_0;
- break;
- case 0x2:
- cpu_silicon_rev = MX51_CHIP_REV_1_1;
+ case 0x0:
+ if (cpu_is_mx51())
+ cpu_silicon_rev = MX51_CHIP_REV_2_0;
+ else if (cpu_is_mx53())
+ cpu_silicon_rev = MX53_CHIP_REV_1_0;
break;
case 0x10:
- cpu_silicon_rev = MX51_CHIP_REV_2_0;
- break;
- case 0x20:
- cpu_silicon_rev = MX51_CHIP_REV_3_0;
+ if (cpu_is_mx51())
+ cpu_silicon_rev = MX51_CHIP_REV_3_0;
+ else if (cpu_is_mx53())
+ cpu_silicon_rev = MX53_CHIP_REV_2_0;
break;
default:
cpu_silicon_rev = 0;
}
-
- iounmap(rom);
}
/*
@@ -89,15 +87,39 @@ static int __init mx51_neon_fixup(void)
late_initcall(mx51_neon_fixup);
#endif
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx53
+ */
+int mx53_revision(void)
+{
+ if (!cpu_is_mx53())
+ return -EINVAL;
+
+ if (cpu_silicon_rev == -1)
+ query_silicon_parameter();
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx53_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
void __iomem *base;
+ void __iomem *aips_addr;
- if (!cpu_is_mx51())
+ if (!cpu_is_mx51() || !cpu_is_mx53())
return 0;
- base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+ if (cpu_is_mx51())
+ aips_addr = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+ else if (cpu_is_mx53())
+ aips_addr = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR);
+
+ base = ioremap((unsigned long)aips_addr, SZ_4K);
+
__raw_writel(0x0, base + 0x40);
__raw_writel(0x0, base + 0x44);
__raw_writel(0x0, base + 0x48);
@@ -105,7 +127,13 @@ static int __init post_cpu_init(void)
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
- base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+ if (cpu_is_mx51())
+ aips_addr = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+ else if (cpu_is_mx53())
+ aips_addr = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR);
+
+ base = ioremap((unsigned long)aips_addr, SZ_4K);
+
__raw_writel(0x0, base + 0x40);
__raw_writel(0x0, base + 0x44);
__raw_writel(0x0, base + 0x48);
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index bc3f30d..d2b9f2c 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
@@ -23,7 +23,7 @@
/*
* Define the MX51 memory map.
*/
-static struct map_desc mxc_io_desc[] __initdata = {
+static struct map_desc mx51_mxc_io_desc[] __initdata = {
{
.virtual = MX51_IRAM_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
@@ -53,6 +53,28 @@ static struct map_desc mxc_io_desc[] __initdata = {
};
/*
+ * Define the MX53 memory map.
+ */
+static struct map_desc mx53_mxc_io_desc[] __initdata = {
+ {
+ .virtual = MX53_AIPS1_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX53_AIPS1_BASE_ADDR),
+ .length = MX53_AIPS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX53_SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX53_SPBA0_BASE_ADDR),
+ .length = MX53_SPBA0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = MX53_AIPS2_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(MX53_AIPS2_BASE_ADDR),
+ .length = MX53_AIPS2_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
@@ -62,10 +84,19 @@ void __init mx51_map_io(void)
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
- iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ iotable_init(mx51_mxc_io_desc, ARRAY_SIZE(mx51_mxc_io_desc));
+}
+
+void __init mx53_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX53);
+ mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR));
+ iotable_init(mx53_mxc_io_desc, ARRAY_SIZE(mx53_mxc_io_desc));
}
int imx51_register_gpios(void);
+int imx53_register_gpios(void);
void __init mx51_init_irq(void)
{
@@ -84,3 +115,18 @@ void __init mx51_init_irq(void)
tzic_init_irq(tzic_virt);
imx51_register_gpios();
}
+
+void __init mx53_init_irq(void)
+{
+ unsigned long tzic_addr;
+ void __iomem *tzic_virt;
+
+ tzic_addr = MX53_TZIC_BASE_ADDR;
+
+ tzic_virt = ioremap(tzic_addr, SZ_16K);
+ if (!tzic_virt)
+ panic("unable to map TZIC interrupt controller\n");
+
+ tzic_init_irq(tzic_virt);
+ imx53_register_gpios();
+}
--
1.6.0.4
Hi Dinh,
Le 04/11/2010 23:46, [email protected] a ?crit :
> From: Dinh Nguyen<[email protected]>
>
> Add mx53 support to cpu.c and mm.c.
>
> Also change the method to get the silicon version from the
> documented IIM SREV register instead of reading the ROM code.
>
if iMX5x IIM is like iMX27/31/35, you may need to enable the iim clock before
accessing the registers.
Eric