This patch add support for new mini2440 board LCD's:
3.5" TFT + TS (TD035STED4)
5.6" TFT (Innolux AT056TN52).
Code overtaken from mini2440 kernel:
git://repo.or.cz/linux-2.6/mini2440.git
Signed-off-by: Marek Belisko <[email protected]>
---
arch/arm/mach-s3c2440/mach-mini2440.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index f62bb4c..4c11699 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -185,6 +185,30 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
+ [3] = { /* mini2440 + 3.5" TFT + TS -- New model as Nov 2009 "T35" */
+ _LCD_DECLARE(
+ 7, /* The 3.5 is quite fast */
+ 240, 21, 25, 6, /* x timing */
+ 320, 2, 4, 2, /* y timing */
+ 40), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_INVVDEN |
+ S3C2410_LCDCON5_PWREN),
+ },
+ [4] = { /* mini2440 + 5.6" TFT + touchscreen -- Innolux AT056TN52 */
+ /* be sure the "power" jumper is set accordingly ! */
+ _LCD_DECLARE(
+ 10, /* the 5.3" runs slower */
+ 640, 41, 68, 22, /* x timing */
+ 480, 26, 6, 2, /* y timing */
+ 40), /* refresh rate */
+ .lcdcon5 = (S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN),
+ },
};
/* todo - put into gpio header */
--
1.7.1