In certain machines, camera devices are supplied directly
by a number of regulators. This patch add the ability to drive
these regulators directly by the soc_camera driver.
Signed-off-by: Alberto Panizzo <[email protected]>
---
v2 changes:
It is used the more standard regulator_bulk API, thanks to
Mark Brown for pointing this.
v3 changes:
- Fixed errors addressed.
- Changed the behaviour of soc_camera_power_set: when powering
off, the platform .power function have the priority because
the manipulation of the camera status through gpios, make sense
only if the camera is powered.
drivers/media/video/soc_camera.c | 86 ++++++++++++++++++++++++++++---------
include/media/soc_camera.h | 5 ++
2 files changed, 70 insertions(+), 21 deletions(-)
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 43848a7..136e54f 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -24,6 +24,7 @@
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/vmalloc.h>
@@ -43,6 +44,51 @@ static LIST_HEAD(hosts);
static LIST_HEAD(devices);
static DEFINE_MUTEX(list_lock); /* Protects the list of hosts */
+static int soc_camera_power_set(struct soc_camera_device *icd,
+ struct soc_camera_link *icl,
+ int power_on)
+{
+ int ret;
+
+ if (power_on) {
+ ret = regulator_bulk_enable(icl->num_regulators,
+ icl->regulators);
+ if (ret < 0) {
+ dev_err(icd->pdev, "Cannot enable regulators\n");
+ return ret;
+ }
+
+ if (icl->power)
+ ret = icl->power(icd->pdev, power_on);
+ if (ret < 0) {
+ dev_err(icd->pdev,
+ "Platform failed to power-on the camera.\n");
+
+ regulator_bulk_disable(icl->num_regulators,
+ icl->regulators);
+ return ret;
+ }
+ } else {
+ ret = 0;
+ if (icl->power)
+ ret = icl->power(icd->pdev, 0);
+ if (ret < 0) {
+ dev_err(icd->pdev,
+ "Platform failed to power-off the camera.\n");
+ return ret;
+ }
+
+ ret = regulator_bulk_disable(icl->num_regulators,
+ icl->regulators);
+ if (ret < 0) {
+ dev_err(icd->pdev, "Cannot disable regulators\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
struct soc_camera_device *icd, unsigned int fourcc)
{
@@ -375,11 +421,9 @@ static int soc_camera_open(struct file *file)
},
};
- if (icl->power) {
- ret = icl->power(icd->pdev, 1);
- if (ret < 0)
- goto epower;
- }
+ ret = soc_camera_power_set(icd, icl, 1);
+ if (ret < 0)
+ goto epower;
/* The camera could have been already on, try to reset */
if (icl->reset)
@@ -425,8 +469,7 @@ esfmt:
eresume:
ici->ops->remove(icd);
eiciadd:
- if (icl->power)
- icl->power(icd->pdev, 0);
+ soc_camera_power_set(icd, icl, 0);
epower:
icd->use_count--;
mutex_unlock(&icd->video_lock);
@@ -450,8 +493,7 @@ static int soc_camera_close(struct file *file)
ici->ops->remove(icd);
- if (icl->power)
- icl->power(icd->pdev, 0);
+ soc_camera_power_set(icd, icl, 0);
}
if (icd->streamer == file)
@@ -941,14 +983,14 @@ static int soc_camera_probe(struct device *dev)
dev_info(dev, "Probing %s\n", dev_name(dev));
- if (icl->power) {
- ret = icl->power(icd->pdev, 1);
- if (ret < 0) {
- dev_err(dev,
- "Platform failed to power-on the camera.\n");
- goto epower;
- }
- }
+ ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
+ icl->regulators);
+ if (ret < 0)
+ goto ereg;
+
+ ret = soc_camera_power_set(icd, icl, 1);
+ if (ret < 0)
+ goto epower;
/* The camera could have been already on, try to reset */
if (icl->reset)
@@ -1021,8 +1063,7 @@ static int soc_camera_probe(struct device *dev)
ici->ops->remove(icd);
- if (icl->power)
- icl->power(icd->pdev, 0);
+ soc_camera_power_set(icd, icl, 0);
mutex_unlock(&icd->video_lock);
@@ -1044,9 +1085,10 @@ eadddev:
evdc:
ici->ops->remove(icd);
eadd:
- if (icl->power)
- icl->power(icd->pdev, 0);
+ soc_camera_power_set(icd, icl, 0);
epower:
+ regulator_bulk_free(icl->num_regulators, icl->regulators);
+ereg:
return ret;
}
@@ -1081,6 +1123,8 @@ static int soc_camera_remove(struct device *dev)
}
soc_camera_free_user_formats(icd);
+ regulator_bulk_free(icl->num_regulators, icl->regulators);
+
return 0;
}
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 86e3631..9386db8 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -97,6 +97,7 @@ struct soc_camera_host_ops {
#define SOCAM_SENSOR_INVERT_DATA (1 << 4)
struct i2c_board_info;
+struct regulator_bulk_data;
struct soc_camera_link {
/* Camera bus id, used to match a camera and a bus */
@@ -108,6 +109,10 @@ struct soc_camera_link {
const char *module_name;
void *priv;
+ /* Optional regulators that have to be managed on power on/off events */
+ struct regulator_bulk_data *regulators;
+ int num_regulators;
+
/*
* For non-I2C devices platform platform has to provide methods to
* add a device to the system and to remove
--
1.6.3.3