Hi,
I have a problem with random oopses on boot,
every 1 out of 5 times I boot linux freezes.
I was not able to obtain a call trace, however it happens around 10-15
seconds after boot. I can hear that the tg3 driver is initialised.
In this thread, they have the same problem:
https://bugzilla.novell.com/show_bug.cgi?id=647029
Applying the patch from the thread, makes the problem occurring less
often and dmesg shows acpi-button loads for me on hid PNP0C0C and
LNXPWRBN.
Maybe commit e2fb9754d27513918a4936e8cbaad50ff56cfd3d
ACPI: button: remove unnecessary null pointer checks
has unmasked an underlying problem?
-Tobias
--- a/drivers/acpi/button.c 2010-11-22 20:03:49.000000000 +0100
+++ b/drivers/acpi/button.c 2010-12-04 14:11:51.000000000 +0100
@@ -353,9 +353,13 @@
goto err_free_button;
}
+ printk(KERN_INFO PREFIX "button loading\n");
hid = acpi_device_hid(device);
+ printk(KERN_INFO PREFIX "hid: <%s>\n", hid);
name = acpi_device_name(device);
+ printk(KERN_INFO PREFIX "name: <%s>\n", name);
class = acpi_device_class(device);
+ printk(KERN_INFO PREFIX "class: <%s>\n", class);
if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
!strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
On Saturday, December 04, 2010 08:49:12 am Tobias Karnat wrote:
> I have a problem with random oopses on boot,
> every 1 out of 5 times I boot linux freezes.
>
> I was not able to obtain a call trace, however it happens around 10-15
> seconds after boot. I can hear that the tg3 driver is initialised.
>
> In this thread, they have the same problem:
> https://bugzilla.novell.com/show_bug.cgi?id=647029
Wow, that's a nasty problem.
> Applying the patch from the thread, makes the problem occurring less
> often and dmesg shows acpi-button loads for me on hid PNP0C0C and
> LNXPWRBN.
>
> Maybe commit e2fb9754d27513918a4936e8cbaad50ff56cfd3d
> ACPI: button: remove unnecessary null pointer checks
> has unmasked an underlying problem?
The oopses from the bugzilla are not the sort I would expect from
a null pointer dereference, but since it's fairly reproducible for
you, it might be worth reverting e2fb9754d27 to see whether it makes
any difference.
Does Rich's script from https://bugzilla.novell.com/show_bug.cgi?id=647029#c30
help you reproduce the problem?
Bjorn
Am Montag, den 06.12.2010, 09:28 -0700 schrieb Bjorn Helgaas:
> On Saturday, December 04, 2010 08:49:12 am Tobias Karnat wrote:
> > Applying the patch from the thread, makes the problem occurring less
> > often and dmesg shows acpi-button loads for me on hid PNP0C0C and
> > LNXPWRBN.
> >
> > Maybe commit e2fb9754d27513918a4936e8cbaad50ff56cfd3d
> > ACPI: button: remove unnecessary null pointer checks
> > has unmasked an underlying problem?
>
> The oopses from the bugzilla are not the sort I would expect from
> a null pointer dereference, but since it's fairly reproducible for
> you, it might be worth reverting e2fb9754d27 to see whether it makes
> any difference.
I was not able to revert it.
But it would only mask the problem anyway...
I have now reverted bf04a77227db76f163bc2355ef4e176794987be2
ACPI: button: cache hid/name/class pointers and build acpi_button
as a module but this makes no difference.
> Does Rich's script from https://bugzilla.novell.com/show_bug.cgi?id=647029#c30
> help you reproduce the problem?
No, it only crashes on boot (without the printk patch).
If it happens the machine is completely dead, SysRq does not work.
However it is definitely the acpi_button module, because removing it
also fixes this.
-Tobias
On Monday, December 06, 2010 04:01:43 pm Tobias Karnat wrote:
> Am Montag, den 06.12.2010, 09:28 -0700 schrieb Bjorn Helgaas:
> > On Saturday, December 04, 2010 08:49:12 am Tobias Karnat wrote:
> > > Applying the patch from the thread, makes the problem occurring less
> > > often and dmesg shows acpi-button loads for me on hid PNP0C0C and
> > > LNXPWRBN.
> > >
> > > Maybe commit e2fb9754d27513918a4936e8cbaad50ff56cfd3d
> > > ACPI: button: remove unnecessary null pointer checks
> > > has unmasked an underlying problem?
> >
> > The oopses from the bugzilla are not the sort I would expect from
> > a null pointer dereference, but since it's fairly reproducible for
> > you, it might be worth reverting e2fb9754d27 to see whether it makes
> > any difference.
>
> I was not able to revert it.
> But it would only mask the problem anyway...
Right, but now the granularity is "remove the acpi_button driver
completely." If we can identify a specific statement inside
acpi_button that makes a difference, that might help.
> I have now reverted bf04a77227db76f163bc2355ef4e176794987be2
> ACPI: button: cache hid/name/class pointers and build acpi_button
> as a module but this makes no difference.
>
> > Does Rich's script from https://bugzilla.novell.com/show_bug.cgi?id=647029#c30
> > help you reproduce the problem?
>
> No, it only crashes on boot (without the printk patch).
> If it happens the machine is completely dead, SysRq does not work.
>
> However it is definitely the acpi_button module, because removing it
> also fixes this.
If it crashes on boot (not when loading an acpi_button module),
you must be building acpi_button into the static kernel.
The acpi_button driver has a fairly complicated add() method.
In the absence of a better idea, I might just comment out blocks
of it and try to isolate the problem. For example, take out
all the input stuff, take out the wakeup GPE stuff, take out
the type/name setup, etc.
Bjorn
Am Montag, den 06.12.2010, 16:26 -0700 schrieb Bjorn Helgaas:
> On Monday, December 06, 2010 04:01:43 pm Tobias Karnat wrote:
> > No, it only crashes on boot (without the printk patch).
> > If it happens the machine is completely dead, SysRq does not work.
> >
> > However it is definitely the acpi_button module, because removing it
> > also fixes this.
>
> If it crashes on boot (not when loading an acpi_button module),
> you must be building acpi_button into the static kernel.
It does crash on boot either if built-in to the kernel or as a module,
However it does not crash if the module is loaded/unloaded after the
machine has booted.
> The acpi_button driver has a fairly complicated add() method.
> In the absence of a better idea, I might just comment out blocks
> of it and try to isolate the problem. For example, take out
> all the input stuff, take out the wakeup GPE stuff, take out
> the type/name setup, etc.
Couldn't this be a compiler issue?
Adding some printk's to fix it seems to be insane.
-Tobias
Am Dienstag, den 07.12.2010, 00:54 +0100 schrieb Tobias Karnat:
> > The acpi_button driver has a fairly complicated add() method.
> > In the absence of a better idea, I might just comment out blocks
> > of it and try to isolate the problem. For example, take out
> > all the input stuff, take out the wakeup GPE stuff, take out
> > the type/name setup, etc.
>
> Couldn't this be a compiler issue?
> Adding some printk's to fix it seems to be insane.
Just in case, here is some more info;
-Tobias
description: Tower Computer
product: Precision WorkStation 390
vendor: Dell Inc.
serial: 6WTSG3J
width: 64 bits
capabilities: smbios-2.3 dmi-2.3 vsyscall64 vsyscall32
configuration: administrator_password=enabled boot=normal chassis=tower power-on_password=enabled uuid=44454C4C-5700-1054-8053-B6C04F47334A
*-core
description: Motherboard
product: 0DN075
vendor: Dell Inc.
physical id: 0
serial: ..CN708217BE90AO.
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: 2.6.0 (05/19/2008)
size: 64KiB
capacity: 960KiB
capabilities: pci pnp apm upgrade shadowing cdboot bootselect edd int13floppytoshiba int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot biosbootspecification netboot
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36.1 (root@Tobias-Karnat) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP PREEMPT Sat Dec 4 15:09:10 CET 2010
[ 0.000000] Command line: root=/dev/md1 ro splash vga=795
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe0ac00 (usable)
[ 0.000000] BIOS-e820: 00000000bfe0ac00 - 00000000bfe0cc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe0ec00 - 00000000bfe5cc00 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe5cc00 - 00000000bfe5ec00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe5ec00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bc000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 000000000 write-back
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfe0a max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfe0ac00 (usable)
[ 0.000000] modified: 00000000bfe0ac00 - 00000000bfe0cc00 (ACPI NVS)
[ 0.000000] modified: 00000000bfe0ec00 - 00000000bfe5cc00 (reserved)
[ 0.000000] modified: 00000000bfe5cc00 - 00000000bfe5ec00 (ACPI data)
[ 0.000000] modified: 00000000bfe5ec00 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001bc000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe0a000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfe0a000 page 4k
[ 0.000000] kernel direct mapping tables up to bfe0a000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001bc000000
[ 0.000000] 0100000000 - 01bc000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1bc000000 @ 19000-21000
[ 0.000000] RAMDISK: 36fff000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fcedc 00094 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000000fd004 000F4 (v03 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000fff53074 036E3 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bfe0ac00 00040
[ 0.000000] ACPI: SSDT 00000000fff56878 000AC (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 00000000000fd0f8 00092 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000000fd18a 00028 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 00000000000fd1b2 00092 (v32 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000000fd244 0003E (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 00000000000fd282 00038 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000000fd4de 00032 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 00000000000fd2ba 00176 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000bfe0ac40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0b049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0b452 001F9 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0b85b 001F9 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0bc64 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001bc000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001bc000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880100200000-ffff8801055fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001bc000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfe0a
[ 0.000000] 0: 0x00100000 -> 0x001bc000
[ 0.000000] On node 0 totalpages: 1555865
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767554 pages, LIFO batch:31
[ 0.000000] Normal zone: 10528 pages used for memmap
[ 0.000000] Normal zone: 759520 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0a000 - 00000000bfe0b000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0b000 - 00000000bfe0c000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0c000 - 00000000bfe0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0f000 - 00000000bfe5c000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5c000 - 00000000bfe5d000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5d000 - 00000000bfe5e000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5e000 - 00000000bfe5f000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5f000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s81280 r8192 d21120 u262144
[ 0.000000] early_res array is doubled to 128 at [1c800 - 1d7ff]
[ 0.000000] pcpu-alloc: s81280 r8192 d21120 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1531001
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md1 ro splash vga=795
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (63 early reservations)
[ 0.000000] #1 [0001000000 - 000197fcc0] TEXT DATA BSS
[ 0.000000] #2 [0036fff000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001980000 - 0001980190] BRK
[ 0.000000] #4 [00000fe720 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000fe710 - 00000fe720] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f0000] BIOS reserved
[ 0.000000] #7 [00000f02e4 - 00000fe710] BIOS reserved
[ 0.000000] #8 [00000f0000 - 00000f02e4] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #12 [0000019000 - 000001c000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [00019801c0 - 00019811c0] BOOTMEM
[ 0.000000] #15 [0001d811c0 - 0001d81640] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0105600000] MEMMAP 0
[ 0.000000] #19 [000197fcc0 - 000197fe40] BOOTMEM
[ 0.000000] #20 [00019811c0 - 00019991c0] BOOTMEM
[ 0.000000] #21 [00019991c0 - 00019b11c0] BOOTMEM
[ 0.000000] #22 [00019b2000 - 00019b3000] BOOTMEM
[ 0.000000] #23 [000197fe40 - 000197fe81] BOOTMEM
[ 0.000000] #24 [000197fec0 - 000197ff03] BOOTMEM
[ 0.000000] #25 [00019b11c0 - 00019b14d0] BOOTMEM
[ 0.000000] #26 [000197ff40 - 000197ffa8] BOOTMEM
[ 0.000000] #27 [00019b1500 - 00019b1568] BOOTMEM
[ 0.000000] #28 [00019b1580 - 00019b15e8] BOOTMEM
[ 0.000000] #29 [00019b1600 - 00019b1668] BOOTMEM
[ 0.000000] #30 [00019b1680 - 00019b16e8] BOOTMEM
[ 0.000000] #31 [00019b1700 - 00019b1768] BOOTMEM
[ 0.000000] #32 [00019b1780 - 00019b17e8] BOOTMEM
[ 0.000000] #33 [00019b1800 - 00019b1868] BOOTMEM
[ 0.000000] #34 [00019b1880 - 00019b18e8] BOOTMEM
[ 0.000000] #35 [00019b1900 - 00019b1968] BOOTMEM
[ 0.000000] #36 [00019b1980 - 00019b19e8] BOOTMEM
[ 0.000000] #37 [00019b1a00 - 00019b1a68] BOOTMEM
[ 0.000000] #38 [00019b1a80 - 00019b1ae8] BOOTMEM
[ 0.000000] #39 [000197ffc0 - 000197ffe0] BOOTMEM
[ 0.000000] #40 [00019b1b00 - 00019b1b20] BOOTMEM
[ 0.000000] #41 [00019b1b40 - 00019b1b60] BOOTMEM
[ 0.000000] #42 [00019b1b80 - 00019b1ba0] BOOTMEM
[ 0.000000] #43 [0001a00000 - 0001a1b000] BOOTMEM
[ 0.000000] #44 [0001a40000 - 0001a5b000] BOOTMEM
[ 0.000000] #45 [0001a80000 - 0001a9b000] BOOTMEM
[ 0.000000] #46 [0001ac0000 - 0001adb000] BOOTMEM
[ 0.000000] #47 [0001b00000 - 0001b1b000] BOOTMEM
[ 0.000000] #48 [0001b40000 - 0001b5b000] BOOTMEM
[ 0.000000] #49 [0001b80000 - 0001b9b000] BOOTMEM
[ 0.000000] #50 [0001bc0000 - 0001bdb000] BOOTMEM
[ 0.000000] #51 [00019b1bc0 - 00019b1bc8] BOOTMEM
[ 0.000000] #52 [00019b1c00 - 00019b1c08] BOOTMEM
[ 0.000000] #53 [00019b1c40 - 00019b1c60] BOOTMEM
[ 0.000000] #54 [00019b1c80 - 00019b1cc0] BOOTMEM
[ 0.000000] #55 [00019b1cc0 - 00019b1de0] BOOTMEM
[ 0.000000] #56 [00019b1e00 - 00019b1e48] BOOTMEM
[ 0.000000] #57 [00019b1e80 - 00019b1ec8] BOOTMEM
[ 0.000000] #58 [00019b3000 - 00019bb000] BOOTMEM
[ 0.000000] #59 [0001d82000 - 0005d82000] BOOTMEM
[ 0.000000] #60 [00019bb000 - 00019db000] BOOTMEM
[ 0.000000] #61 [0001bdb000 - 0001c1b000] BOOTMEM
[ 0.000000] #62 [000001d800 - 0000025800] BOOTMEM
[ 0.000000] Memory: 6044256k/7274496k available (5673k kernel code, 1051036k absent, 179204k reserved, 2458k data, 844k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.242 MHz processor.
[ 0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.48 BogoMIPS (lpj=2394242)
[ 0.001016] pid_max: default: 32768 minimum: 301
[ 0.001043] Security Framework initialized
[ 0.001064] AppArmor: AppArmor initialized
[ 0.001805] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007706] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010515] Mount-cache hash table entries: 256
[ 0.010689] Initializing cgroup subsys ns
[ 0.010697] Initializing cgroup subsys cpuacct
[ 0.010703] Initializing cgroup subsys memory
[ 0.010715] Initializing cgroup subsys devices
[ 0.010719] Initializing cgroup subsys freezer
[ 0.010723] Initializing cgroup subsys net_cls
[ 0.010760] CPU: Physical Processor ID: 0
[ 0.010764] CPU: Processor Core ID: 0
[ 0.010768] mce: CPU supports 6 MCE banks
[ 0.010777] CPU0: Thermal monitoring enabled (TM2)
[ 0.010784] using mwait in idle threads.
[ 0.010787] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.010796] PEBS disabled due to CPU errata.
[ 0.010802] ... version: 2
[ 0.010805] ... bit width: 40
[ 0.010808] ... generic registers: 2
[ 0.010812] ... value mask: 000000ffffffffff
[ 0.010815] ... max period: 000000007fffffff
[ 0.010819] ... fixed-purpose events: 3
[ 0.010822] ... event mask: 0000000700000003
[ 0.011747] ACPI: Core revision 20100702
[ 0.089008] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.089016] ftrace: allocating 21373 entries in 84 pages
[ 0.090050] Setting APIC routing to flat
[ 0.090360] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.101053] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.105019] Booting Node 0, Processors #1 #2 #3
[ 0.323008] Brought up 4 CPUs
[ 0.323014] Total of 4 processors activated (19152.69 BogoMIPS).
[ 0.324055] devtmpfs: initialized
[ 0.325643] regulator: core version 0.5
[ 0.325667] Time: 21:26:37 Date: 12/06/10
[ 0.325700] NET: Registered protocol family 16
[ 0.325798] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.325805] ACPI: bus type pci registered
[ 0.325853] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.325860] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.335731] PCI: Using configuration type 1 for base access
[ 0.336355] bio: create slab <bio-0> at 0
[ 0.337178] ACPI: EC: Look up EC in DSDT
[ 0.354269] ACPI: BIOS _OSI(Linux) query ignored
[ 0.365798] ACPI: Interpreter enabled
[ 0.365807] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.366019] ACPI: Using IOAPIC for interrupt routing
[ 0.436126] ACPI: No dock devices found.
[ 0.436131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.441022] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.450587] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.450594] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.450599] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.450605] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
[ 0.450610] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.450616] pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xfec00000]
[ 0.450621] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xefffffff]
[ 0.450627] pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff]
[ 0.450632] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
[ 0.450637] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
[ 0.450710] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.450713] pci 0000:00:01.0: PME# disabled
[ 0.450799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.450803] pci 0000:00:1c.0: PME# disabled
[ 0.451004] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.451008] pci 0000:00:1c.4: PME# disabled
[ 0.451096] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.451099] pci 0000:00:1c.5: PME# disabled
[ 0.451153] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
[ 0.451214] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
[ 0.451276] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
[ 0.451337] pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f]
[ 0.451387] pci 0000:00:1d.7: reg 10: [mem 0xff980800-0xff980bff]
[ 0.451451] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.451455] pci 0000:00:1d.7: PME# disabled
[ 0.451593] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.451601] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.451607] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.451614] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[ 0.451657] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.451666] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.451674] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.451683] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.451691] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.451735] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
[ 0.451742] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
[ 0.451750] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
[ 0.451757] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
[ 0.451765] pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfecf]
[ 0.451772] pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9703ff]
[ 0.451796] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.451799] pci 0000:00:1f.2: PME# disabled
[ 0.451859] pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
[ 0.451929] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.451939] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.451950] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfdffffff 64bit]
[ 0.451957] pci 0000:01:00.0: reg 24: [io 0xdc80-0xdcff]
[ 0.451964] pci 0000:01:00.0: reg 30: [mem 0xfaf00000-0xfaf7ffff pref]
[ 0.451997] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.452003] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.452005] pci 0000:00:01.0: bridge window [mem 0xfaf00000-0xfdffffff]
[ 0.452009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.452107] pci 0000:02:00.0: reg 10: [mem 0xfadfbf80-0xfadfbfff 64bit]
[ 0.452128] pci 0000:02:00.0: reg 18: [mem 0xfadfc000-0xfadfffff 64bit]
[ 0.452141] pci 0000:02:00.0: reg 20: [io 0xcc80-0xccff]
[ 0.452166] pci 0000:02:00.0: reg 30: [mem 0xfae00000-0xfae7ffff pref]
[ 0.452205] pci 0000:02:00.0: supports D1 D2
[ 0.452226] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.452232] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.452238] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.452242] pci 0000:00:1c.0: bridge window [mem 0xfad00000-0xfaefffff]
[ 0.452247] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.452284] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.452290] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.452293] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.452299] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.452377] pci 0000:04:00.0: reg 10: [mem 0xfacf0000-0xfacfffff 64bit]
[ 0.452471] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.452475] pci 0000:04:00.0: PME# disabled
[ 0.452495] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.452501] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.452505] pci 0000:00:1c.5: bridge window [mem 0xfac00000-0xfacfffff]
[ 0.452510] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.452557] pci 0000:05:02.0: reg 10: [io 0xbcc0-0xbcff]
[ 0.452618] pci 0000:05:02.0: supports D1 D2
[ 0.452646] pci 0000:05:02.1: reg 10: [io 0xbcb8-0xbcbf]
[ 0.452708] pci 0000:05:02.1: supports D1 D2
[ 0.452738] pci 0000:05:02.2: reg 10: [mem 0xfabeb800-0xfabebfff]
[ 0.452748] pci 0000:05:02.2: reg 14: [mem 0xfabec000-0xfabeffff]
[ 0.452805] pci 0000:05:02.2: supports D1 D2
[ 0.452806] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.452810] pci 0000:05:02.2: PME# disabled
[ 0.452850] pci 0000:05:04.0: reg 10: [mem 0xf7000000-0xf7ffffff]
[ 0.452942] pci 0000:05:04.1: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.453036] pci 0000:05:04.2: reg 10: [mem 0xf9000000-0xf9ffffff]
[ 0.453151] pci 0000:05:05.0: reg 10: [mem 0xfabf0000-0xfabfffff]
[ 0.453250] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.453257] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.453260] pci 0000:00:1e.0: bridge window [mem 0xf7000000-0xfabfffff]
[ 0.453266] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.453268] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.453270] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.453272] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.453275] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
[ 0.453277] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.453279] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfec00000] (subtractive decode)
[ 0.453281] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xefffffff] (subtractive decode)
[ 0.453284] pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff] (subtractive decode)
[ 0.453286] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
[ 0.453288] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
[ 0.453308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.453621] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.453894] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.454131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.454292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 0.454459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
[ 1.059122] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.059486] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.059879] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.060251] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.060612] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.061014] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.061382] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.061752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.061846] HEST: Table is not found!
[ 1.061901] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.061912] vgaarb: loaded
[ 1.062037] SCSI subsystem initialized
[ 1.062046] libata version 3.00 loaded.
[ 1.062067] usbcore: registered new interface driver usbfs
[ 1.062079] usbcore: registered new interface driver hub
[ 1.062085] usbcore: registered new device driver usb
[ 1.062085] ACPI: WMI: Mapper loaded
[ 1.062085] PCI: Using ACPI for IRQ routing
[ 1.062085] PCI: pci_cache_line_size set to 64 bytes
[ 1.062085] pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9703ff]
[ 1.062148] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 1.062153] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 1.062158] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 1.062161] reserve RAM buffer: 00000000bfe0ac00 - 00000000bfffffff
[ 1.062234] NetLabel: Initializing
[ 1.062238] NetLabel: domain hash size = 128
[ 1.062242] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.062258] NetLabel: unlabeled traffic allowed by default
[ 1.062284] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 1.062291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.062298] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.067023] Switching to clocksource tsc
[ 1.073614] AppArmor: AppArmor Filesystem Enabled
[ 1.073634] pnp: PnP ACPI init
[ 1.073652] ACPI: bus type pnp registered
[ 1.081217] pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 1.081225] pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 1.113069] pnp: PnP ACPI: found 13 devices
[ 1.113074] ACPI: ACPI bus type pnp unregistered
[ 1.113085] system 00:01: [io 0x0c00-0x0c7f] has been reserved
[ 1.113095] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.113101] system 00:0a: [mem 0x00100000-0x00ffffff] could not be reserved
[ 1.113106] system 00:0a: [mem 0x01000000-0xbfe0abff] could not be reserved
[ 1.113111] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 1.113116] system 00:0a: [mem 0x000c0000-0x000d3fff] has been reserved
[ 1.113121] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 1.113127] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.113131] system 00:0a: [mem 0xffb00000-0xffbfffff] has been reserved
[ 1.113136] system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
[ 1.113143] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 1.113148] system 00:0b: [mem 0xfeda0000-0xfedacfff] has been reserved
[ 1.118967] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 1.118974] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
[ 1.118980] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 1.118987] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
[ 1.118993] pci 0000:00:1c.4: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.118998] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.119007] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf4800000-0xf48003ff]
[ 1.119014] pci 0000:00:1f.2: BAR 5: set to [mem 0xf4800000-0xf48003ff] (PCI address [0xf4800000-0xf48003ff]
[ 1.119021] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.119026] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.119032] pci 0000:00:01.0: bridge window [mem 0xfaf00000-0xfdffffff]
[ 1.119037] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.119045] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.119050] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.119056] pci 0000:00:1c.0: bridge window [mem 0xfad00000-0xfaefffff]
[ 1.119063] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 1.119071] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 1.119076] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 1.119083] pci 0000:00:1c.4: bridge window [mem 0xf4200000-0xf43fffff]
[ 1.119089] pci 0000:00:1c.4: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 1.119098] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.119103] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 1.119109] pci 0000:00:1c.5: bridge window [mem 0xfac00000-0xfacfffff]
[ 1.119115] pci 0000:00:1c.5: bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
[ 1.119125] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 1.119130] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 1.119137] pci 0000:00:1e.0: bridge window [mem 0xf7000000-0xfabfffff]
[ 1.119143] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.119156] alloc irq_desc for 16 on node -1
[ 1.119157] alloc kstat_irqs on node -1
[ 1.119163] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.119170] pci 0000:00:01.0: setting latency timer to 64
[ 1.119177] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.119183] pci 0000:00:1c.0: setting latency timer to 64
[ 1.119190] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.119196] pci 0000:00:1c.4: setting latency timer to 64
[ 1.119203] alloc irq_desc for 17 on node -1
[ 1.119204] alloc kstat_irqs on node -1
[ 1.119208] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.119214] pci 0000:00:1c.5: setting latency timer to 64
[ 1.119220] pci 0000:00:1e.0: setting latency timer to 64
[ 1.119223] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.119225] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.119227] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.119229] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
[ 1.119231] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 1.119233] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfec00000]
[ 1.119235] pci_bus 0000:00: resource 10 [mem 0xbff00000-0xefffffff]
[ 1.119237] pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff]
[ 1.119239] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
[ 1.119241] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
[ 1.119244] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.119246] pci_bus 0000:01: resource 1 [mem 0xfaf00000-0xfdffffff]
[ 1.119248] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 1.119250] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.119252] pci_bus 0000:02: resource 1 [mem 0xfad00000-0xfaefffff]
[ 1.119254] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 1.119256] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 1.119258] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf43fffff]
[ 1.119260] pci_bus 0000:03: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 1.119262] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 1.119264] pci_bus 0000:04: resource 1 [mem 0xfac00000-0xfacfffff]
[ 1.119266] pci_bus 0000:04: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
[ 1.119268] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 1.119270] pci_bus 0000:05: resource 1 [mem 0xf7000000-0xfabfffff]
[ 1.119272] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.119274] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.119276] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.119278] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000effff]
[ 1.119280] pci_bus 0000:05: resource 8 [mem 0x000f0000-0x000fffff]
[ 1.119282] pci_bus 0000:05: resource 9 [mem 0xf4000000-0xfec00000]
[ 1.119284] pci_bus 0000:05: resource 10 [mem 0xbff00000-0xefffffff]
[ 1.119286] pci_bus 0000:05: resource 11 [mem 0xff980800-0xff980bff]
[ 1.119288] pci_bus 0000:05: resource 12 [mem 0xff97c000-0xff97ffff]
[ 1.119290] pci_bus 0000:05: resource 13 [mem 0xfed20000-0xfed9ffff]
[ 1.119319] NET: Registered protocol family 2
[ 1.119546] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.120886] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.126311] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.127053] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.127059] TCP reno registered
[ 1.127077] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.127181] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.127411] NET: Registered protocol family 1
[ 1.127576] pci 0000:01:00.0: Boot video device
[ 1.127600] PCI: CLS 64 bytes, default 64
[ 1.127657] Trying to unpack rootfs image as initramfs...
[ 1.449480] Freeing initrd memory: 16324k freed
[ 1.455900] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.455915] Placing 64MB software IO TLB between ffff880001d82000 - ffff880005d82000
[ 1.455921] software IO TLB at phys 0x1d82000 - 0x5d82000
[ 1.455993] Simple Boot Flag at 0x7a set to 0x80
[ 1.456311] Scanning for low memory corruption every 60 seconds
[ 1.456499] audit: initializing netlink socket (disabled)
[ 1.456518] type=2000 audit(1291670798.455:1): initialized
[ 1.464116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.465405] VFS: Disk quotas dquot_6.5.2
[ 1.465459] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.466019] fuse init (API version 7.15)
[ 1.466103] msgmni has been set to 11837
[ 1.466356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.466365] io scheduler noop registered
[ 1.466370] io scheduler deadline registered
[ 1.466417] io scheduler cfq registered (default)
[ 1.466613] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.466633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.468337] vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90005800000, using 10240k, total 14336k
[ 1.468344] vesafb: mode is 1280x1024x32, linelength=5120, pages=1
[ 1.468348] vesafb: scrolling: redraw
[ 1.468352] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.518261] Console: switching to colour frame buffer device 160x64
[ 1.565302] fb0: VESA VGA frame buffer device
[ 1.565597] ACPI: button loading
[ 1.565780] ACPI: hid: <PNP0C0C>
[ 1.565961] ACPI: name: <>
[ 1.566117] ACPI: class: <>
[ 1.566310] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.566783] ACPI: Power Button [VBTN]
[ 1.567007] ACPI: button loading
[ 1.567189] ACPI: hid: <LNXPWRBN>
[ 1.567375] ACPI: name: <>
[ 1.567527] ACPI: class: <>
[ 1.567716] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.568137] ACPI: Power Button [PWRF]
[ 1.568888] ACPI: acpi_idle registered with cpuidle
On Tue, Dec 07, 2010 at 12:54:59AM +0100, Tobias Karnat wrote:
> Am Montag, den 06.12.2010, 16:26 -0700 schrieb Bjorn Helgaas:
> > On Monday, December 06, 2010 04:01:43 pm Tobias Karnat wrote:
> > > No, it only crashes on boot (without the printk patch).
> > > If it happens the machine is completely dead, SysRq does not work.
> > >
> > > However it is definitely the acpi_button module, because removing it
> > > also fixes this.
> >
> > If it crashes on boot (not when loading an acpi_button module),
> > you must be building acpi_button into the static kernel.
>
> It does crash on boot either if built-in to the kernel or as a module,
> However it does not crash if the module is loaded/unloaded after the
> machine has booted.
>
> > The acpi_button driver has a fairly complicated add() method.
> > In the absence of a better idea, I might just comment out blocks
> > of it and try to isolate the problem. For example, take out
> > all the input stuff, take out the wakeup GPE stuff, take out
> > the type/name setup, etc.
>
> Couldn't this be a compiler issue?
> Adding some printk's to fix it seems to be insane.
Agreed, adding printk's is absolutely not any kind of fix.
I think it's more likely to be some sort of memory corruption or
race than a compiler problem. I assume there is some old kernel
that works fine, even when compiled with the same compiler.
In addition to the isolation ideas I suggested above, you might
boot with "maxcpus=1" and turn on all the Kconfig memory debug
switches.
Bjorn
I agree that it's a timing race condition. I had an earlier version of
acpi-button with printf's that masked the issue from happening.
Rich
On Mon, 6 Dec 2010 22:15:21 -0700
Bjorn Helgaas <[email protected]> wrote:
> On Tue, Dec 07, 2010 at 12:54:59AM +0100, Tobias Karnat wrote:
> > Am Montag, den 06.12.2010, 16:26 -0700 schrieb Bjorn Helgaas:
> > > On Monday, December 06, 2010 04:01:43 pm Tobias Karnat wrote:
> > > > No, it only crashes on boot (without the printk patch).
> > > > If it happens the machine is completely dead, SysRq does not work.
> > > >
> > > > However it is definitely the acpi_button module, because removing it
> > > > also fixes this.
> > >
> > > If it crashes on boot (not when loading an acpi_button module),
> > > you must be building acpi_button into the static kernel.
> >
> > It does crash on boot either if built-in to the kernel or as a module,
> > However it does not crash if the module is loaded/unloaded after the
> > machine has booted.
> >
> > > The acpi_button driver has a fairly complicated add() method.
> > > In the absence of a better idea, I might just comment out blocks
> > > of it and try to isolate the problem. For example, take out
> > > all the input stuff, take out the wakeup GPE stuff, take out
> > > the type/name setup, etc.
> >
> > Couldn't this be a compiler issue?
> > Adding some printk's to fix it seems to be insane.
>
> Agreed, adding printk's is absolutely not any kind of fix.
> I think it's more likely to be some sort of memory corruption or
> race than a compiler problem. I assume there is some old kernel
> that works fine, even when compiled with the same compiler.
>
> In addition to the isolation ideas I suggested above, you might
> boot with "maxcpus=1" and turn on all the Kconfig memory debug
> switches.
>
> Bjorn
>
--
Am Montag, den 06.12.2010, 22:15 -0700 schrieb Bjorn Helgaas:
> In addition to the isolation ideas I suggested above, you might
> boot with "maxcpus=1" and turn on all the Kconfig memory debug
> switches.
Booting with mminit_loglevel=4 maxcpus=1 causes this to show up:
[ 17.364026] usb 1-6: device descriptor read/64, error -110
[ 32.579024] usb 1-6: device descriptor read/64, error -110
[ 32.794012] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 47.907019] usb 1-6: device descriptor read/64, error -110
[ 63.121019] usb 1-6: device descriptor read/64, error -110
[ 63.335022] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 73.748031] usb 1-6: device not accepting address 7, error -110
[ 73.861018] usb 1-6: new high speed USB device using ehci_hcd and address 8
[ 84.274018] usb 1-6: device not accepting address 8, error -110
[ 84.285143] hub 1-0:1.0: unable to enumerate USB device on port 6
I have nothing connected to 1-6:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 046d:c20a Logitech, Inc. WingMan RumblePad
Bus 004 Device 002: ID 03eb:3301 Atmel Corp. at43301 4-Port Hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c062 Logitech, Inc.
Bus 002 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0dda:2026 Integrated Circuit Solution, Inc. USB2.0 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
It shows up at the same time as the crash happens without maxcpus.
However SysRq does work in this case.
-Tobias
Am Dienstag, den 07.12.2010, 16:02 +0100 schrieb Tobias Karnat:
> I have nothing connected to 1-6:
>
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 004 Device 003: ID 046d:c20a Logitech, Inc. WingMan RumblePad
> Bus 004 Device 002: ID 03eb:3301 Atmel Corp. at43301 4-Port Hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 002 Device 003: ID 046d:c062 Logitech, Inc.
> Bus 002 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 005: ID 0dda:2026 Integrated Circuit Solution, Inc. USB2.0 Card Reader
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Oh well, it might be the Card Reader.
I also get this:
[ 506.822024] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 661.830024] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 902.854026] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 1309.894029] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 1344.814018] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 1891.814028] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 2736.838021] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 2969.830024] usb 1-6: reset high speed USB device using ehci_hcd and address 5
[ 3002.806023] usb 1-6: reset high speed USB device using ehci_hcd and address 5
I will try booting without it, maybe it fixes the boot issue.
But strange that the printk patch could fix this.
And the card reader did work with earlier kernels ~2.6.2x.
-Tobias
Am Dienstag, den 07.12.2010, 16:35 +0100 schrieb Tobias Karnat:
> Oh well, it might be the Card Reader.
>
> I will try booting without it, maybe it fixes the boot issue.
>
> But strange that the printk patch could fix this.
> And the card reader did work with earlier kernels ~2.6.2x.
No, it wasn't the card reader.
I have no idea why it throws errors with maxcpus=1, but right now the
bigger problem is to get the oops on boot fixed.
-Tobias
Dmesg with mminit_loglevel=4:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.36.1 (root@Tobias-Karnat) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP PREEMPT Sat Dec 4 15:09:10 CET 2010
[ 0.000000] Command line: root=/dev/md1 ro single vga=795 mminit_loglevel=4 maxcpus=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe0ac00 (usable)
[ 0.000000] BIOS-e820: 00000000bfe0ac00 - 00000000bfe0cc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe0ec00 - 00000000bfe5cc00 (reserved)
[ 0.000000] BIOS-e820: 00000000bfe5cc00 - 00000000bfe5ec00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe5ec00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001bc000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1bc000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 000000000 write-back
[ 0.000000] 1 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfe0a max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfe0ac00 (usable)
[ 0.000000] modified: 00000000bfe0ac00 - 00000000bfe0cc00 (ACPI NVS)
[ 0.000000] modified: 00000000bfe0ec00 - 00000000bfe5cc00 (reserved)
[ 0.000000] modified: 00000000bfe5cc00 - 00000000bfe5ec00 (ACPI data)
[ 0.000000] modified: 00000000bfe5ec00 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 00000001bc000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe0a000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfe0a000 page 4k
[ 0.000000] kernel direct mapping tables up to bfe0a000 @ 16000-1b000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001bc000000
[ 0.000000] 0100000000 - 01bc000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1bc000000 @ 19000-21000
[ 0.000000] RAMDISK: 36fff000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000febf0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000fcedc 00094 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: FACP 00000000000fd004 000F4 (v03 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: DSDT 00000000fff53074 036E3 (v01 DELL dt_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bfe0ac00 00040
[ 0.000000] ACPI: SSDT 00000000fff56878 000AC (v01 DELL st_ex 00001000 INTL 20050624)
[ 0.000000] ACPI: APIC 00000000000fd0f8 00092 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: BOOT 00000000000fd18a 00028 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: ASF! 00000000000fd1b2 00092 (v32 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: MCFG 00000000000fd244 0003E (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: HPET 00000000000fd282 00038 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: TCPA 00000000000fd4de 00032 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: SLIC 00000000000fd2ba 00176 (v01 DELL B8K 00000015 ASL 00000061)
[ 0.000000] ACPI: SSDT 00000000bfe0ac40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0b049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0b452 001F9 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0b85b 001F9 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bfe0bc64 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001bc000000
[ 0.000000] mminit::memory_register Entering add_active_range(0, 0x10, 0x9f) 0 entries of 3200 used
[ 0.000000] mminit::memory_register Entering add_active_range(0, 0x100, 0xbfe0a) 1 entries of 3200 used
[ 0.000000] mminit::memory_register Entering add_active_range(0, 0x100000, 0x1bc000) 2 entries of 3200 used
[ 0.000000] Initmem setup node 0 0000000000000000-00000001bc000000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880100200000-ffff8801055fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001bc000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfe0a
[ 0.000000] 0: 0x00100000 -> 0x001bc000
[ 0.000000] mminit::pageflags_layout_widths Section 0 Node 6 Zone 2 Flags 25
[ 0.000000] mminit::pageflags_layout_shifts Section 19 Node 6 Zone 2
[ 0.000000] mminit::pageflags_layout_offsets Section 0 Node 58 Zone 56
[ 0.000000] mminit::pageflags_layout_zoneid Zone ID: 56 -> 64
[ 0.000000] mminit::pageflags_layout_usage location: 64 -> 56 unused 56 -> 25 flags 25 -> 0
[ 0.000000] On node 0 totalpages: 1555865
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] mminit::memmap_init Initialising map node 0 zone 0 pfns 16 -> 4096
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767554 pages, LIFO batch:31
[ 0.000000] mminit::memmap_init Initialising map node 0 zone 1 pfns 4096 -> 1048576
[ 0.000000] Normal zone: 10528 pages used for memmap
[ 0.000000] Normal zone: 759520 pages, LIFO batch:31
[ 0.000000] mminit::memmap_init Initialising map node 0 zone 2 pfns 1048576 -> 1818624
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0a000 - 00000000bfe0b000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0b000 - 00000000bfe0c000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0c000 - 00000000bfe0f000
[ 0.000000] PM: Registered nosave memory: 00000000bfe0f000 - 00000000bfe5c000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5c000 - 00000000bfe5d000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5d000 - 00000000bfe5e000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5e000 - 00000000bfe5f000
[ 0.000000] PM: Registered nosave memory: 00000000bfe5f000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s81280 r8192 d21120 u262144
[ 0.000000] early_res array is doubled to 128 at [1c800 - 1d7ff]
[ 0.000000] pcpu-alloc: s81280 r8192 d21120 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] mminit::zonelist general 0:DMA = 0:DMA
[ 0.000000] mminit::zonelist general 0:DMA32 = 0:DMA32 0:DMA
[ 0.000000] mminit::zonelist general 0:Normal = 0:Normal 0:DMA32 0:DMA
[ 0.000000] mminit::zonelist thisnode 0:DMA = 0:DMA
[ 0.000000] mminit::zonelist thisnode 0:DMA32 = 0:DMA32 0:DMA
[ 0.000000] mminit::zonelist thisnode 0:Normal = 0:Normal 0:DMA32 0:DMA
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1531001
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md1 ro single vga=795 mminit_loglevel=4 maxcpus=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (63 early reservations)
[ 0.000000] #1 [0001000000 - 000197fcc0] TEXT DATA BSS
[ 0.000000] #2 [0036fff000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001980000 - 0001980190] BRK
[ 0.000000] #4 [00000fe720 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000fe710 - 00000fe720] MP-table mpf
[ 0.000000] #6 [000009fc00 - 00000f0000] BIOS reserved
[ 0.000000] #7 [00000f02e4 - 00000fe710] BIOS reserved
[ 0.000000] #8 [00000f0000 - 00000f02e4] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000019000] PGTABLE
[ 0.000000] #12 [0000019000 - 000001c000] PGTABLE
[ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #14 [00019801c0 - 00019811c0] BOOTMEM
[ 0.000000] #15 [0001d811c0 - 0001d81640] BOOTMEM
[ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #18 [0100200000 - 0105600000] MEMMAP 0
[ 0.000000] #19 [000197fcc0 - 000197fe40] BOOTMEM
[ 0.000000] #20 [00019811c0 - 00019991c0] BOOTMEM
[ 0.000000] #21 [00019991c0 - 00019b11c0] BOOTMEM
[ 0.000000] #22 [00019b2000 - 00019b3000] BOOTMEM
[ 0.000000] #23 [000197fe40 - 000197fe81] BOOTMEM
[ 0.000000] #24 [000197fec0 - 000197ff03] BOOTMEM
[ 0.000000] #25 [00019b11c0 - 00019b14d0] BOOTMEM
[ 0.000000] #26 [000197ff40 - 000197ffa8] BOOTMEM
[ 0.000000] #27 [00019b1500 - 00019b1568] BOOTMEM
[ 0.000000] #28 [00019b1580 - 00019b15e8] BOOTMEM
[ 0.000000] #29 [00019b1600 - 00019b1668] BOOTMEM
[ 0.000000] #30 [00019b1680 - 00019b16e8] BOOTMEM
[ 0.000000] #31 [00019b1700 - 00019b1768] BOOTMEM
[ 0.000000] #32 [00019b1780 - 00019b17e8] BOOTMEM
[ 0.000000] #33 [00019b1800 - 00019b1868] BOOTMEM
[ 0.000000] #34 [00019b1880 - 00019b18e8] BOOTMEM
[ 0.000000] #35 [00019b1900 - 00019b1968] BOOTMEM
[ 0.000000] #36 [00019b1980 - 00019b19e8] BOOTMEM
[ 0.000000] #37 [00019b1a00 - 00019b1a68] BOOTMEM
[ 0.000000] #38 [00019b1a80 - 00019b1ae8] BOOTMEM
[ 0.000000] #39 [000197ffc0 - 000197ffe0] BOOTMEM
[ 0.000000] #40 [00019b1b00 - 00019b1b20] BOOTMEM
[ 0.000000] #41 [00019b1b40 - 00019b1b7c] BOOTMEM
[ 0.000000] #42 [00019b1b80 - 00019b1bbc] BOOTMEM
[ 0.000000] #43 [0001a00000 - 0001a1b000] BOOTMEM
[ 0.000000] #44 [0001a40000 - 0001a5b000] BOOTMEM
[ 0.000000] #45 [0001a80000 - 0001a9b000] BOOTMEM
[ 0.000000] #46 [0001ac0000 - 0001adb000] BOOTMEM
[ 0.000000] #47 [0001b00000 - 0001b1b000] BOOTMEM
[ 0.000000] #48 [0001b40000 - 0001b5b000] BOOTMEM
[ 0.000000] #49 [0001b80000 - 0001b9b000] BOOTMEM
[ 0.000000] #50 [0001bc0000 - 0001bdb000] BOOTMEM
[ 0.000000] #51 [00019b1bc0 - 00019b1bc8] BOOTMEM
[ 0.000000] #52 [00019b1c00 - 00019b1c08] BOOTMEM
[ 0.000000] #53 [00019b1c40 - 00019b1c60] BOOTMEM
[ 0.000000] #54 [00019b1c80 - 00019b1cc0] BOOTMEM
[ 0.000000] #55 [00019b1cc0 - 00019b1de0] BOOTMEM
[ 0.000000] #56 [00019b1e00 - 00019b1e48] BOOTMEM
[ 0.000000] #57 [00019b1e80 - 00019b1ec8] BOOTMEM
[ 0.000000] #58 [00019b3000 - 00019bb000] BOOTMEM
[ 0.000000] #59 [0001d82000 - 0005d82000] BOOTMEM
[ 0.000000] #60 [00019bb000 - 00019db000] BOOTMEM
[ 0.000000] #61 [0001bdb000 - 0001c1b000] BOOTMEM
[ 0.000000] #62 [000001d800 - 0000025800] BOOTMEM
[ 0.000000] Memory: 6044256k/7274496k available (5673k kernel code, 1051036k absent, 179204k reserved, 2458k data, 844k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.073 MHz processor.
[ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.14 BogoMIPS (lpj=2394073)
[ 0.001017] pid_max: default: 32768 minimum: 301
[ 0.001045] Security Framework initialized
[ 0.001067] AppArmor: AppArmor initialized
[ 0.002032] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008112] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011073] Mount-cache hash table entries: 256
[ 0.011254] Initializing cgroup subsys ns
[ 0.011263] Initializing cgroup subsys cpuacct
[ 0.011268] Initializing cgroup subsys memory
[ 0.011280] Initializing cgroup subsys devices
[ 0.011285] Initializing cgroup subsys freezer
[ 0.011289] Initializing cgroup subsys net_cls
[ 0.011326] CPU: Physical Processor ID: 0
[ 0.011330] CPU: Processor Core ID: 0
[ 0.011334] mce: CPU supports 6 MCE banks
[ 0.011344] CPU0: Thermal monitoring enabled (TM2)
[ 0.011351] using mwait in idle threads.
[ 0.011354] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.011363] PEBS disabled due to CPU errata.
[ 0.011369] ... version: 2
[ 0.011372] ... bit width: 40
[ 0.011375] ... generic registers: 2
[ 0.011379] ... value mask: 000000ffffffffff
[ 0.011382] ... max period: 000000007fffffff
[ 0.011386] ... fixed-purpose events: 3
[ 0.011390] ... event mask: 0000000700000003
[ 0.011427] SMP alternatives: switching to UP code
[ 0.017801] ACPI: Core revision 20100702
[ 0.095881] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.095890] ftrace: allocating 21373 entries in 84 pages
[ 0.097048] Setting APIC routing to flat
[ 0.097363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.107891] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.109102] Brought up 1 CPUs
[ 0.109108] Total of 1 processors activated (4788.14 BogoMIPS).
[ 0.109212] devtmpfs: initialized
[ 0.110002] regulator: core version 0.5
[ 0.110028] Time: 14:17:48 Date: 12/07/10
[ 0.110064] NET: Registered protocol family 16
[ 0.110156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.110162] ACPI: bus type pci registered
[ 0.110208] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.110215] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.119021] PCI: Using configuration type 1 for base access
[ 0.119626] bio: create slab <bio-0> at 0
[ 0.120152] ACPI: EC: Look up EC in DSDT
[ 0.137271] ACPI: BIOS _OSI(Linux) query ignored
[ 0.148297] ACPI: Interpreter enabled
[ 0.148302] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.148322] ACPI: Using IOAPIC for interrupt routing
[ 0.217853] ACPI: No dock devices found.
[ 0.217859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.222593] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.232181] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.232187] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.232192] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.232197] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
[ 0.232203] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.232208] pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xfec00000]
[ 0.232213] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xefffffff]
[ 0.232219] pci_root PNP0A03:00: host bridge window [mem 0xff980800-0xff980bff]
[ 0.232224] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
[ 0.232229] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
[ 0.232298] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.232301] pci 0000:00:01.0: PME# disabled
[ 0.232385] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.232388] pci 0000:00:1c.0: PME# disabled
[ 0.232455] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.232459] pci 0000:00:1c.4: PME# disabled
[ 0.232524] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.232527] pci 0000:00:1c.5: PME# disabled
[ 0.232579] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
[ 0.232639] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
[ 0.232699] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
[ 0.232759] pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f]
[ 0.232808] pci 0000:00:1d.7: reg 10: [mem 0xff980800-0xff980bff]
[ 0.232870] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.232874] pci 0000:00:1d.7: PME# disabled
[ 0.233065] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.233072] pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
[ 0.233078] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[ 0.233085] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[ 0.233128] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 0.233136] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 0.233144] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 0.233152] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 0.233161] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.233203] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
[ 0.233210] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13]
[ 0.233218] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27]
[ 0.233225] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33]
[ 0.233232] pci 0000:00:1f.2: reg 20: [io 0xfec0-0xfecf]
[ 0.233239] pci 0000:00:1f.2: reg 24: [mem 0xff970000-0xff9703ff]
[ 0.233263] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.233266] pci 0000:00:1f.2: PME# disabled
[ 0.233324] pci 0000:00:1f.3: reg 20: [io 0xece0-0xecff]
[ 0.233392] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.233402] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.233412] pci 0000:01:00.0: reg 1c: [mem 0xfc000000-0xfdffffff 64bit]
[ 0.233419] pci 0000:01:00.0: reg 24: [io 0xdc80-0xdcff]
[ 0.233426] pci 0000:01:00.0: reg 30: [mem 0xfaf00000-0xfaf7ffff pref]
[ 0.233458] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.233463] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.233465] pci 0000:00:01.0: bridge window [mem 0xfaf00000-0xfdffffff]
[ 0.233469] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.233547] pci 0000:02:00.0: reg 10: [mem 0xfadfbf80-0xfadfbfff 64bit]
[ 0.233567] pci 0000:02:00.0: reg 18: [mem 0xfadfc000-0xfadfffff 64bit]
[ 0.233580] pci 0000:02:00.0: reg 20: [io 0xcc80-0xccff]
[ 0.233605] pci 0000:02:00.0: reg 30: [mem 0xfae00000-0xfae7ffff pref]
[ 0.233643] pci 0000:02:00.0: supports D1 D2
[ 0.233663] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.233670] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.233675] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.233679] pci 0000:00:1c.0: bridge window [mem 0xfad00000-0xfaefffff]
[ 0.233684] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.233719] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.233725] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.233729] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.233734] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.233811] pci 0000:04:00.0: reg 10: [mem 0xfacf0000-0xfacfffff 64bit]
[ 0.233902] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.233907] pci 0000:04:00.0: PME# disabled
[ 0.233927] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.233932] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
[ 0.233936] pci 0000:00:1c.5: bridge window [mem 0xfac00000-0xfacfffff]
[ 0.233941] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.233987] pci 0000:05:02.0: reg 10: [io 0xbcc0-0xbcff]
[ 0.234050] pci 0000:05:02.0: supports D1 D2
[ 0.234078] pci 0000:05:02.1: reg 10: [io 0xbcb8-0xbcbf]
[ 0.234138] pci 0000:05:02.1: supports D1 D2
[ 0.234168] pci 0000:05:02.2: reg 10: [mem 0xfabeb800-0xfabebfff]
[ 0.234177] pci 0000:05:02.2: reg 14: [mem 0xfabec000-0xfabeffff]
[ 0.234233] pci 0000:05:02.2: supports D1 D2
[ 0.234234] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.234238] pci 0000:05:02.2: PME# disabled
[ 0.234277] pci 0000:05:04.0: reg 10: [mem 0xf7000000-0xf7ffffff]
[ 0.234366] pci 0000:05:04.1: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.234450] pci 0000:05:04.2: reg 10: [mem 0xf9000000-0xf9ffffff]
[ 0.234542] pci 0000:05:05.0: reg 10: [mem 0xfabf0000-0xfabfffff]
[ 0.234638] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.234644] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.234648] pci 0000:00:1e.0: bridge window [mem 0xf7000000-0xfabfffff]
[ 0.234653] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.234655] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.234657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.234659] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.234661] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive decode)
[ 0.234664] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.234666] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfec00000] (subtractive decode)
[ 0.234668] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xefffffff] (subtractive decode)
[ 0.234670] pci 0000:00:1e.0: bridge window [mem 0xff980800-0xff980bff] (subtractive decode)
[ 0.234673] pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive decode)
[ 0.234675] pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive decode)
[ 0.234694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.235006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.235280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.235500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.235660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
[ 0.235826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
[ 0.836451] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.836801] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.837197] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.837557] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.837916] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.838314] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.838662] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.839038] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.839131] HEST: Table is not found!
[ 0.839180] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.839188] vgaarb: loaded
[ 0.839304] SCSI subsystem initialized
[ 0.839325] libata version 3.00 loaded.
[ 0.839362] usbcore: registered new interface driver usbfs
[ 0.839373] usbcore: registered new interface driver hub
[ 0.839396] usbcore: registered new device driver usb
[ 0.839491] ACPI: WMI: Mapper loaded
[ 0.839495] PCI: Using ACPI for IRQ routing
[ 0.839499] PCI: pci_cache_line_size set to 64 bytes
[ 0.839523] pci 0000:00:1f.2: no compatible bridge window for [mem 0xff970000-0xff9703ff]
[ 0.839579] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.839583] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.839588] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.839590] reserve RAM buffer: 00000000bfe0ac00 - 00000000bfffffff
[ 0.839660] NetLabel: Initializing
[ 0.839664] NetLabel: domain hash size = 128
[ 0.839667] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.839682] NetLabel: unlabeled traffic allowed by default
[ 0.839707] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.839714] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.839721] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.843021] Switching to clocksource tsc
[ 0.848816] AppArmor: AppArmor Filesystem Enabled
[ 0.848836] pnp: PnP ACPI init
[ 0.848855] ACPI: bus type pnp registered
[ 0.856450] pnp 00:01: disabling [io 0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.856459] pnp 00:01: disabling [io 0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
[ 0.888183] pnp: PnP ACPI: found 13 devices
[ 0.888188] ACPI: ACPI bus type pnp unregistered
[ 0.888199] system 00:01: [io 0x0c00-0x0c7f] has been reserved
[ 0.888208] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.888214] system 00:0a: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.888219] system 00:0a: [mem 0x01000000-0xbfe0abff] could not be reserved
[ 0.888224] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.888229] system 00:0a: [mem 0x000c0000-0x000d3fff] has been reserved
[ 0.888234] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.888239] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.888244] system 00:0a: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.888249] system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.888255] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.888264] system 00:0b: [mem 0xfeda0000-0xfedacfff] has been reserved
[ 0.893966] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.893977] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
[ 0.893983] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.893989] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
[ 0.893995] pci 0000:00:1c.4: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.894000] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.894005] pci 0000:00:1f.2: BAR 5: assigned [mem 0xf4800000-0xf48003ff]
[ 0.894012] pci 0000:00:1f.2: BAR 5: set to [mem 0xf4800000-0xf48003ff] (PCI address [0xf4800000-0xf48003ff]
[ 0.894019] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.894023] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.894029] pci 0000:00:01.0: bridge window [mem 0xfaf00000-0xfdffffff]
[ 0.894034] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.894041] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.894046] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.894053] pci 0000:00:1c.0: bridge window [mem 0xfad00000-0xfaefffff]
[ 0.894059] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.894067] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.894072] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.894078] pci 0000:00:1c.4: bridge window [mem 0xf4200000-0xf43fffff]
[ 0.894084] pci 0000:00:1c.4: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.894093] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.894098] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.894104] pci 0000:00:1c.5: bridge window [mem 0xfac00000-0xfacfffff]
[ 0.894110] pci 0000:00:1c.5: bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
[ 0.894119] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.894124] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
[ 0.894131] pci 0000:00:1e.0: bridge window [mem 0xf7000000-0xfabfffff]
[ 0.894136] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.894149] alloc irq_desc for 16 on node -1
[ 0.894151] alloc kstat_irqs on node -1
[ 0.894157] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.894163] pci 0000:00:01.0: setting latency timer to 64
[ 0.894170] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.894176] pci 0000:00:1c.0: setting latency timer to 64
[ 0.894183] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.894189] pci 0000:00:1c.4: setting latency timer to 64
[ 0.894196] alloc irq_desc for 17 on node -1
[ 0.894197] alloc kstat_irqs on node -1
[ 0.894200] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.894206] pci 0000:00:1c.5: setting latency timer to 64
[ 0.894212] pci 0000:00:1e.0: setting latency timer to 64
[ 0.894215] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.894217] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.894219] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.894221] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
[ 0.894223] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.894225] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xfec00000]
[ 0.894227] pci_bus 0000:00: resource 10 [mem 0xbff00000-0xefffffff]
[ 0.894229] pci_bus 0000:00: resource 11 [mem 0xff980800-0xff980bff]
[ 0.894231] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
[ 0.894233] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
[ 0.894235] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.894237] pci_bus 0000:01: resource 1 [mem 0xfaf00000-0xfdffffff]
[ 0.894239] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.894241] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.894243] pci_bus 0000:02: resource 1 [mem 0xfad00000-0xfaefffff]
[ 0.894245] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.894247] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.894248] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf43fffff]
[ 0.894250] pci_bus 0000:03: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.894253] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.894254] pci_bus 0000:04: resource 1 [mem 0xfac00000-0xfacfffff]
[ 0.894256] pci_bus 0000:04: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
[ 0.894259] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.894260] pci_bus 0000:05: resource 1 [mem 0xf7000000-0xfabfffff]
[ 0.894262] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.894264] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.894266] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.894268] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000effff]
[ 0.894270] pci_bus 0000:05: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.894272] pci_bus 0000:05: resource 9 [mem 0xf4000000-0xfec00000]
[ 0.894274] pci_bus 0000:05: resource 10 [mem 0xbff00000-0xefffffff]
[ 0.894276] pci_bus 0000:05: resource 11 [mem 0xff980800-0xff980bff]
[ 0.894277] pci_bus 0000:05: resource 12 [mem 0xff97c000-0xff97ffff]
[ 0.894279] pci_bus 0000:05: resource 13 [mem 0xfed20000-0xfed9ffff]
[ 0.894309] NET: Registered protocol family 2
[ 0.894502] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.895721] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.901040] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.901744] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.901749] TCP reno registered
[ 0.901765] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.901866] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.902105] NET: Registered protocol family 1
[ 0.902249] pci 0000:01:00.0: Boot video device
[ 0.902271] PCI: CLS 64 bytes, default 64
[ 0.902323] Trying to unpack rootfs image as initramfs...
[ 1.218783] Freeing initrd memory: 16324k freed
[ 1.224822] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.224836] Placing 64MB software IO TLB between ffff880001d82000 - ffff880005d82000
[ 1.224841] software IO TLB at phys 0x1d82000 - 0x5d82000
[ 1.224898] Simple Boot Flag at 0x7a set to 0x80
[ 1.225076] Scanning for low memory corruption every 60 seconds
[ 1.225255] audit: initializing netlink socket (disabled)
[ 1.225273] type=2000 audit(1291731469.224:1): initialized
[ 1.232817] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.233922] VFS: Disk quotas dquot_6.5.2
[ 1.233973] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.234454] fuse init (API version 7.15)
[ 1.234525] msgmni has been set to 11837
[ 1.234698] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.234705] io scheduler noop registered
[ 1.234708] io scheduler deadline registered
[ 1.234740] io scheduler cfq registered (default)
[ 1.234870] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.234893] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.236416] vesafb: framebuffer at 0xfd000000, mapped to 0xffffc90005800000, using 10240k, total 14336k
[ 1.236423] vesafb: mode is 1280x1024x32, linelength=5120, pages=1
[ 1.236427] vesafb: scrolling: redraw
[ 1.236431] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.286098] Console: switching to colour frame buffer device 160x64
[ 1.332406] fb0: VESA VGA frame buffer device
[ 1.332697] ACPI: button loading
[ 1.332879] ACPI: hid: <PNP0C0C>
[ 1.333065] ACPI: name: <>
[ 1.333217] ACPI: class: <>
[ 1.333406] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.333880] ACPI: Power Button [VBTN]
[ 1.334101] ACPI: button loading
[ 1.334283] ACPI: hid: <LNXPWRBN>
[ 1.334469] ACPI: name: <>
[ 1.334621] ACPI: class: <>
[ 1.334805] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.335226] ACPI: Power Button [PWRF]
[ 1.335965] ACPI: acpi_idle registered with cpuidle