2011-02-22 18:53:51

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: [GIT PULL 0/2] perf/core TUI live annotate and a cleanup

Hi Ingo,

Please consider pulling from:

git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 perf/core

Mike, if you can give it some stress, I'd appreciate.

Regards,

- Arnaldo

Arnaldo Carvalho de Melo (2):
perf probe: Remove redundant checks
perf top: Live TUI Annotation

tools/perf/builtin-top.c | 36 +++++-----
tools/perf/util/annotate.h | 6 +-
tools/perf/util/probe-event.c | 2 +-
tools/perf/util/probe-finder.c | 5 +-
tools/perf/util/top.h | 1 +
tools/perf/util/ui/browsers/annotate.c | 126 +++++++++++++++++++++++---------
tools/perf/util/ui/browsers/top.c | 45 +++++++++++-
7 files changed, 159 insertions(+), 62 deletions(-)


2011-02-22 18:53:27

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: [PATCH 2/2] perf top: Live TUI Annotation

From: Arnaldo Carvalho de Melo <[email protected]>

Now one has just to press the right key, 'a' or Enter on the main 'perf
top --tui' screen to live annotate the symbol under the cursor.

The annotate window starts centered on the hottest line (the one with
most samples so far) then TAB and shift+TAB can be used to go to the
prev/next hot line.

Pressing 'H' at any point will center again the screen on the hottest
line.

Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
---
tools/perf/builtin-top.c | 36 +++++-----
tools/perf/util/annotate.h | 6 +-
tools/perf/util/top.h | 1 +
tools/perf/util/ui/browsers/annotate.c | 126 +++++++++++++++++++++++---------
tools/perf/util/ui/browsers/top.c | 45 +++++++++++-
5 files changed, 156 insertions(+), 58 deletions(-)

diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index c9fd66d..f88a263 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -92,7 +92,6 @@ static bool dump_symtab = false;
static struct winsize winsize;

static const char *sym_filter = NULL;
-struct sym_entry *sym_filter_entry = NULL;
struct sym_entry *sym_filter_entry_sched = NULL;
static int sym_pcnt_filter = 5;

@@ -168,18 +167,19 @@ static int parse_source(struct sym_entry *syme)
pthread_mutex_lock(&notes->lock);

if (symbol__alloc_hist(sym, top.evlist->nr_entries) < 0) {
+ pthread_mutex_unlock(&notes->lock);
pr_err("Not enough memory for annotating '%s' symbol!\n",
sym->name);
sleep(1);
- goto out_unlock;
+ return err;
}

err = symbol__annotate(sym, syme->map, 0);
if (err == 0) {
out_assign:
- sym_filter_entry = syme;
+ top.sym_filter_entry = syme;
}
-out_unlock:
+
pthread_mutex_unlock(&notes->lock);
return err;
}
@@ -195,7 +195,7 @@ static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
struct annotation *notes;
struct symbol *sym;

- if (syme != sym_filter_entry)
+ if (syme != top.sym_filter_entry)
return;

sym = sym_entry__symbol(syme);
@@ -275,8 +275,8 @@ static void print_sym_table(struct perf_session *session)
session->hists.stats.total_lost);
}

- if (sym_filter_entry) {
- show_details(sym_filter_entry);
+ if (top.sym_filter_entry) {
+ show_details(top.sym_filter_entry);
return;
}

@@ -417,8 +417,8 @@ static void print_mapped_keys(void)
{
char *name = NULL;

- if (sym_filter_entry) {
- struct symbol *sym = sym_entry__symbol(sym_filter_entry);
+ if (top.sym_filter_entry) {
+ struct symbol *sym = sym_entry__symbol(top.sym_filter_entry);
name = sym->name;
}

@@ -549,15 +549,15 @@ static void handle_keypress(struct perf_session *session, int c)
perf_session__fprintf_dsos(session, stderr);
exit(0);
case 's':
- prompt_symbol(&sym_filter_entry, "Enter details symbol");
+ prompt_symbol(&top.sym_filter_entry, "Enter details symbol");
break;
case 'S':
- if (!sym_filter_entry)
+ if (!top.sym_filter_entry)
break;
else {
- struct sym_entry *syme = sym_filter_entry;
+ struct sym_entry *syme = top.sym_filter_entry;

- sym_filter_entry = NULL;
+ top.sym_filter_entry = NULL;
__zero_source_counters(syme);
}
break;
@@ -656,7 +656,7 @@ static int symbol_filter(struct map *map, struct symbol *sym)
syme->map = map;
symbol__annotate_init(map, sym);

- if (!sym_filter_entry && sym_filter && !strcmp(name, sym_filter)) {
+ if (!top.sym_filter_entry && sym_filter && !strcmp(name, sym_filter)) {
/* schedule initial sym_filter_entry setup */
sym_filter_entry_sched = syme;
sym_filter = NULL;
@@ -750,13 +750,13 @@ static void perf_event__process_sample(const union perf_event *event,

/* let's see, whether we need to install initial sym_filter_entry */
if (sym_filter_entry_sched) {
- sym_filter_entry = sym_filter_entry_sched;
+ top.sym_filter_entry = sym_filter_entry_sched;
sym_filter_entry_sched = NULL;
- if (parse_source(sym_filter_entry) < 0) {
- struct symbol *sym = sym_entry__symbol(sym_filter_entry);
+ if (parse_source(top.sym_filter_entry) < 0) {
+ struct symbol *sym = sym_entry__symbol(top.sym_filter_entry);

pr_err("Can't annotate %s", sym->name);
- if (sym_filter_entry->map->dso->origin == DSO__ORIG_KERNEL) {
+ if (top.sym_filter_entry->map->dso->origin == DSO__ORIG_KERNEL) {
pr_err(": No vmlinux file was found in the path:\n");
machine__fprintf_vmlinux_path(machine, stderr);
} else
diff --git a/tools/perf/util/annotate.h b/tools/perf/util/annotate.h
index e848803..c2c2868 100644
--- a/tools/perf/util/annotate.h
+++ b/tools/perf/util/annotate.h
@@ -90,12 +90,14 @@ int symbol__tty_annotate(struct symbol *sym, struct map *map, int evidx,

#ifdef NO_NEWT_SUPPORT
static inline int symbol__tui_annotate(struct symbol *sym __used,
- struct map *map __used, int evidx __used)
+ struct map *map __used,
+ int evidx __used, int refresh __used)
{
return 0;
}
#else
-int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx);
+int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
+ int refresh);
#endif

#endif /* __PERF_ANNOTATE_H */
diff --git a/tools/perf/util/top.h b/tools/perf/util/top.h
index 4f769f4..e8d28e2 100644
--- a/tools/perf/util/top.h
+++ b/tools/perf/util/top.h
@@ -44,6 +44,7 @@ struct perf_top {
pid_t target_pid, target_tid;
bool hide_kernel_symbols, hide_user_symbols, zero;
const char *cpu_list;
+ struct sym_entry *sym_filter_entry;
struct perf_evsel *sym_evsel;
};

diff --git a/tools/perf/util/ui/browsers/annotate.c b/tools/perf/util/ui/browsers/annotate.c
index cfb5a27..8c17a87 100644
--- a/tools/perf/util/ui/browsers/annotate.c
+++ b/tools/perf/util/ui/browsers/annotate.c
@@ -6,6 +6,7 @@
#include "../../sort.h"
#include "../../symbol.h"
#include "../../annotate.h"
+#include <pthread.h>

static void ui__error_window(const char *fmt, ...)
{
@@ -138,46 +139,108 @@ static void annotate_browser__set_top(struct annotate_browser *self,
self->curr_hot = nd;
}

-static int annotate_browser__run(struct annotate_browser *self)
+static void annotate_browser__calc_percent(struct annotate_browser *browser,
+ int evidx)
{
- struct rb_node *nd;
+ struct symbol *sym = browser->b.priv;
+ struct annotation *notes = symbol__annotation(sym);
+ struct objdump_line *pos;
+
+ browser->entries = RB_ROOT;
+
+ pthread_mutex_lock(&notes->lock);
+
+ list_for_each_entry(pos, &notes->src->source, node) {
+ struct objdump_line_rb_node *rbpos = objdump_line__rb(pos);
+ rbpos->percent = objdump_line__calc_percent(pos, sym, evidx);
+ if (rbpos->percent < 0.01) {
+ RB_CLEAR_NODE(&rbpos->rb_node);
+ continue;
+ }
+ objdump__insert_line(&browser->entries, rbpos);
+ }
+ pthread_mutex_unlock(&notes->lock);
+
+ browser->curr_hot = rb_last(&browser->entries);
+}
+
+static int annotate_browser__run(struct annotate_browser *self, int evidx,
+ int refresh)
+{
+ struct rb_node *nd = NULL;
struct symbol *sym = self->b.priv;
+ /*
+ * RIGHT To allow builtin-annotate to cycle thru multiple symbols by
+ * examining the exit key for this function.
+ */
+ int exit_keys[] = { 'H', NEWT_KEY_TAB, NEWT_KEY_UNTAB,
+ NEWT_KEY_RIGHT, 0 };
int key;

if (ui_browser__show(&self->b, sym->name,
- "<-, -> or ESC: exit, TAB/shift+TAB: cycle thru samples") < 0)
+ "<-, -> or ESC: exit, TAB/shift+TAB: "
+ "cycle hottest lines, H: Hottest") < 0)
return -1;
- /*
- * To allow builtin-annotate to cycle thru multiple symbols by
- * examining the exit key for this function.
- */
- ui_browser__add_exit_key(&self->b, NEWT_KEY_RIGHT);
+
+ ui_browser__add_exit_keys(&self->b, exit_keys);
+ annotate_browser__calc_percent(self, evidx);
+
+ if (self->curr_hot)
+ annotate_browser__set_top(self, self->curr_hot);

nd = self->curr_hot;
- if (nd) {
- int tabs[] = { NEWT_KEY_TAB, NEWT_KEY_UNTAB, 0 };
- ui_browser__add_exit_keys(&self->b, tabs);
- }
+
+ if (refresh != 0)
+ newtFormSetTimer(self->b.form, refresh);

while (1) {
key = ui_browser__run(&self->b);

+ if (refresh != 0) {
+ annotate_browser__calc_percent(self, evidx);
+ /*
+ * Current line focus got out of the list of most active
+ * lines, NULL it so that if TAB|UNTAB is pressed, we
+ * move to curr_hot (current hottest line).
+ */
+ if (nd != NULL && RB_EMPTY_NODE(nd))
+ nd = NULL;
+ }
+
switch (key) {
+ case -1:
+ /*
+ * FIXME we need to check if it was
+ * es.reason == NEWT_EXIT_TIMER
+ */
+ if (refresh != 0)
+ symbol__annotate_decay_histogram(sym, evidx);
+ continue;
case NEWT_KEY_TAB:
- nd = rb_prev(nd);
- if (nd == NULL)
- nd = rb_last(&self->entries);
- annotate_browser__set_top(self, nd);
+ if (nd != NULL) {
+ nd = rb_prev(nd);
+ if (nd == NULL)
+ nd = rb_last(&self->entries);
+ } else
+ nd = self->curr_hot;
break;
case NEWT_KEY_UNTAB:
- nd = rb_next(nd);
- if (nd == NULL)
- nd = rb_first(&self->entries);
- annotate_browser__set_top(self, nd);
+ if (nd != NULL)
+ nd = rb_next(nd);
+ if (nd == NULL)
+ nd = rb_first(&self->entries);
+ else
+ nd = self->curr_hot;
+ break;
+ case 'H':
+ nd = self->curr_hot;
break;
default:
goto out;
}
+
+ if (nd != NULL)
+ annotate_browser__set_top(self, nd);
}
out:
ui_browser__hide(&self->b);
@@ -186,13 +249,13 @@ out:

int hist_entry__tui_annotate(struct hist_entry *he, int evidx)
{
- return symbol__tui_annotate(he->ms.sym, he->ms.map, evidx);
+ return symbol__tui_annotate(he->ms.sym, he->ms.map, evidx, 0);
}

-int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx)
+int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx,
+ int refresh)
{
struct objdump_line *pos, *n;
- struct objdump_line_rb_node *rbpos;
struct annotation *notes = symbol__annotation(sym);
struct annotate_browser browser = {
.b = {
@@ -211,7 +274,7 @@ int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx)
if (map->dso->annotate_warned)
return -1;

- if (symbol__annotate(sym, map, sizeof(*rbpos)) < 0) {
+ if (symbol__annotate(sym, map, sizeof(struct objdump_line_rb_node)) < 0) {
ui__error_window(ui_helpline__last_msg);
return -1;
}
@@ -219,26 +282,17 @@ int symbol__tui_annotate(struct symbol *sym, struct map *map, int evidx)
ui_helpline__push("Press <- or ESC to exit");

list_for_each_entry(pos, &notes->src->source, node) {
+ struct objdump_line_rb_node *rbpos;
size_t line_len = strlen(pos->line);
+
if (browser.b.width < line_len)
browser.b.width = line_len;
rbpos = objdump_line__rb(pos);
rbpos->idx = browser.b.nr_entries++;
- rbpos->percent = objdump_line__calc_percent(pos, sym, evidx);
- if (rbpos->percent < 0.01)
- continue;
- objdump__insert_line(&browser.entries, rbpos);
}

- /*
- * Position the browser at the hottest line.
- */
- browser.curr_hot = rb_last(&browser.entries);
- if (browser.curr_hot)
- annotate_browser__set_top(&browser, browser.curr_hot);
-
browser.b.width += 18; /* Percentage */
- ret = annotate_browser__run(&browser);
+ ret = annotate_browser__run(&browser, evidx, refresh);
list_for_each_entry_safe(pos, n, &notes->src->source, node) {
list_del(&pos->node);
objdump_line__free(pos);
diff --git a/tools/perf/util/ui/browsers/top.c b/tools/perf/util/ui/browsers/top.c
index ca60624..377ff58 100644
--- a/tools/perf/util/ui/browsers/top.c
+++ b/tools/perf/util/ui/browsers/top.c
@@ -7,6 +7,7 @@
* Released under the GPL v2. (and only v2, not any later version)
*/
#include "../browser.h"
+#include "../../annotate.h"
#include "../helpline.h"
#include "../libslang.h"
#include "../../evlist.h"
@@ -18,6 +19,7 @@
struct perf_top_browser {
struct ui_browser b;
struct rb_root root;
+ struct sym_entry *selection;
float sum_ksamples;
int dso_width;
int dso_short_width;
@@ -60,6 +62,9 @@ static void perf_top_browser__write(struct ui_browser *browser, void *entry, int
slsmg_write_nstring(width >= syme->map->dso->long_name_len ?
syme->map->dso->long_name :
syme->map->dso->short_name, width);
+
+ if (current_entry)
+ top_browser->selection = syme;
}

static void perf_top_browser__update_rb_tree(struct perf_top_browser *browser)
@@ -80,21 +85,52 @@ static void perf_top_browser__update_rb_tree(struct perf_top_browser *browser)
browser->b.nr_entries = top->rb_entries;
}

+static void perf_top_browser__annotate(struct perf_top_browser *browser)
+{
+ struct sym_entry *syme = browser->selection;
+ struct symbol *sym = sym_entry__symbol(syme);
+ struct annotation *notes = symbol__annotation(sym);
+ struct perf_top *top = browser->b.priv;
+
+ if (notes->src != NULL)
+ goto do_annotation;
+
+ pthread_mutex_lock(&notes->lock);
+
+ top->sym_filter_entry = NULL;
+
+ if (symbol__alloc_hist(sym, top->evlist->nr_entries) < 0) {
+ pr_err("Not enough memory for annotating '%s' symbol!\n",
+ sym->name);
+ pthread_mutex_unlock(&notes->lock);
+ return;
+ }
+
+ top->sym_filter_entry = syme;
+
+ pthread_mutex_unlock(&notes->lock);
+do_annotation:
+ symbol__tui_annotate(sym, syme->map, 0, top->delay_secs * 1000);
+}
+
static int perf_top_browser__run(struct perf_top_browser *browser)
{
int key;
char title[160];
struct perf_top *top = browser->b.priv;
int delay_msecs = top->delay_secs * 1000;
+ int exit_keys[] = { 'a', NEWT_KEY_ENTER, NEWT_KEY_RIGHT, 0, };

perf_top_browser__update_rb_tree(browser);
perf_top__header_snprintf(top, title, sizeof(title));
perf_top__reset_sample_counters(top);

- if (ui_browser__show(&browser->b, title, "ESC: exit") < 0)
+ if (ui_browser__show(&browser->b, title,
+ "ESC: exit, ENTER|->|a: Live Annotate") < 0)
return -1;

newtFormSetTimer(browser->b.form, delay_msecs);
+ ui_browser__add_exit_keys(&browser->b, exit_keys);

while (1) {
key = ui_browser__run(&browser->b);
@@ -109,7 +145,12 @@ static int perf_top_browser__run(struct perf_top_browser *browser)
SLsmg_gotorc(0, 0);
slsmg_write_nstring(title, browser->b.width);
break;
- case NEWT_KEY_TAB:
+ case 'a':
+ case NEWT_KEY_RIGHT:
+ case NEWT_KEY_ENTER:
+ if (browser->selection)
+ perf_top_browser__annotate(browser);
+ break;
default:
goto out;
}
--
1.6.2.5

2011-02-22 18:53:28

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: [PATCH 1/2] perf probe: Remove redundant checks

From: Arnaldo Carvalho de Melo <[email protected]>

While fixing an error propagating problem in f809b25 I added two
redundant checks.

I did that because I didn't expect the checks to be on the while and for
loop condition expression, where they are tested before we run the loop,
where the 'ret' variable is set.

So remove it from there and leave it just after it is actually set,
eliminating unneded tests.

Reported-by: Masami Hiramatsu <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
---
tools/perf/util/probe-event.c | 2 +-
tools/perf/util/probe-finder.c | 5 ++---
2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 369ddc6..5ddee66 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -1832,7 +1832,7 @@ int add_perf_probe_events(struct perf_probe_event *pevs, int npevs,
}

/* Loop 2: add all events */
- for (i = 0; i < npevs && ret >= 0; i++) {
+ for (i = 0; i < npevs; i++) {
ret = __add_probe_trace_events(pkgs[i].pev, pkgs[i].tevs,
pkgs[i].ntevs, force_add);
if (ret < 0)
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index eecbdca..17f9c4a 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -1462,8 +1462,7 @@ static int find_probes(int fd, struct probe_finder *pf)
off = 0;
line_list__init(&pf->lcache);
/* Loop on CUs (Compilation Unit) */
- while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) &&
- ret >= 0) {
+ while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
/* Get the DIE(Debugging Information Entry) of this CU */
diep = dwarf_offdie(dbg, off + cuhl, &pf->cu_die);
if (!diep)
@@ -1484,7 +1483,7 @@ static int find_probes(int fd, struct probe_finder *pf)
pf->lno = pp->line;
ret = find_probe_point_by_line(pf);
}
- if (ret != DWARF_CB_OK)
+ if (ret < 0)
break;
}
off = noff;
--
1.6.2.5

Subject: Re: [PATCH 1/2] perf probe: Remove redundant checks

(2011/02/23 3:53), Arnaldo Carvalho de Melo wrote:
> From: Arnaldo Carvalho de Melo <[email protected]>
>
> While fixing an error propagating problem in f809b25 I added two
> redundant checks.
>
> I did that because I didn't expect the checks to be on the while and for
> loop condition expression, where they are tested before we run the loop,
> where the 'ret' variable is set.
>
> So remove it from there and leave it just after it is actually set,
> eliminating unneded tests.

Thanks, that's good for me :)

Acked-by: Masami Hiramatsu <[email protected]>

>
> Reported-by: Masami Hiramatsu <[email protected]>
> Cc: Frederic Weisbecker <[email protected]>
> Cc: Ingo Molnar <[email protected]>
> Cc: Masami Hiramatsu <[email protected]>
> Cc: Mike Galbraith <[email protected]>
> Cc: Paul Mackerras <[email protected]>
> Cc: Peter Zijlstra <[email protected]>
> Cc: Stephane Eranian <[email protected]>
> Cc: Tom Zanussi <[email protected]>
> LKML-Reference: <new-submission>
> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
> ---
> tools/perf/util/probe-event.c | 2 +-
> tools/perf/util/probe-finder.c | 5 ++---
> 2 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
> index 369ddc6..5ddee66 100644
> --- a/tools/perf/util/probe-event.c
> +++ b/tools/perf/util/probe-event.c
> @@ -1832,7 +1832,7 @@ int add_perf_probe_events(struct perf_probe_event *pevs, int npevs,
> }
>
> /* Loop 2: add all events */
> - for (i = 0; i < npevs && ret >= 0; i++) {
> + for (i = 0; i < npevs; i++) {
> ret = __add_probe_trace_events(pkgs[i].pev, pkgs[i].tevs,
> pkgs[i].ntevs, force_add);
> if (ret < 0)
> diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
> index eecbdca..17f9c4a 100644
> --- a/tools/perf/util/probe-finder.c
> +++ b/tools/perf/util/probe-finder.c
> @@ -1462,8 +1462,7 @@ static int find_probes(int fd, struct probe_finder *pf)
> off = 0;
> line_list__init(&pf->lcache);
> /* Loop on CUs (Compilation Unit) */
> - while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) &&
> - ret >= 0) {
> + while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
> /* Get the DIE(Debugging Information Entry) of this CU */
> diep = dwarf_offdie(dbg, off + cuhl, &pf->cu_die);
> if (!diep)
> @@ -1484,7 +1483,7 @@ static int find_probes(int fd, struct probe_finder *pf)
> pf->lno = pp->line;
> ret = find_probe_point_by_line(pf);
> }
> - if (ret != DWARF_CB_OK)
> + if (ret < 0)
> break;
> }
> off = noff;


--
Masami HIRAMATSU
2nd Dept. Linux Technology Center
Hitachi, Ltd., Systems Development Laboratory
E-mail: [email protected]

2011-02-23 07:29:03

by Ingo Molnar

[permalink] [raw]
Subject: Re: [GIT PULL 0/2] perf/core TUI live annotate and a cleanup


* Arnaldo Carvalho de Melo <[email protected]> wrote:

> Hi Ingo,
>
> Please consider pulling from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 perf/core
>
> Mike, if you can give it some stress, I'd appreciate.
>
> Regards,
>
> - Arnaldo
>
> Arnaldo Carvalho de Melo (2):
> perf probe: Remove redundant checks
> perf top: Live TUI Annotation

Yummie! :-)

> tools/perf/builtin-top.c | 36 +++++-----
> tools/perf/util/annotate.h | 6 +-
> tools/perf/util/probe-event.c | 2 +-
> tools/perf/util/probe-finder.c | 5 +-
> tools/perf/util/top.h | 1 +
> tools/perf/util/ui/browsers/annotate.c | 126 +++++++++++++++++++++++---------
> tools/perf/util/ui/browsers/top.c | 45 +++++++++++-
> 7 files changed, 159 insertions(+), 62 deletions(-)

Pulled, thanks a lot Arnaldo!

Ingo

2011-02-23 07:35:23

by Mike Galbraith

[permalink] [raw]
Subject: Re: [GIT PULL 0/2] perf/core TUI live annotate and a cleanup

On Wed, 2011-02-23 at 08:28 +0100, Ingo Molnar wrote:
> * Arnaldo Carvalho de Melo <[email protected]> wrote:
>
> > Hi Ingo,
> >
> > Please consider pulling from:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 perf/core
> >
> > Mike, if you can give it some stress, I'd appreciate.
> >
> > Regards,
> >
> > - Arnaldo
> >
> > Arnaldo Carvalho de Melo (2):
> > perf probe: Remove redundant checks
> > perf top: Live TUI Annotation
>
> Yummie! :-)

(indeed, I will take it out for a spin)

2011-02-23 14:32:34

by Mike Galbraith

[permalink] [raw]
Subject: Re: [GIT PULL 0/2] perf/core TUI live annotate and a cleanup

On Wed, 2011-02-23 at 08:35 +0100, Mike Galbraith wrote:
> On Wed, 2011-02-23 at 08:28 +0100, Ingo Molnar wrote:
> > * Arnaldo Carvalho de Melo <[email protected]> wrote:
> >
> > > Hi Ingo,
> > >
> > > Please consider pulling from:
> > >
> > > git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 perf/core
> > >
> > > Mike, if you can give it some stress, I'd appreciate.
> > >
> > > Regards,
> > >
> > > - Arnaldo
> > >
> > > Arnaldo Carvalho de Melo (2):
> > > perf probe: Remove redundant checks
> > > perf top: Live TUI Annotation
> >
> > Yummie! :-)
>
> (indeed, I will take it out for a spin)

Works spiffy, and no lockup troubles (didn't get back to that, koff),
much nicer than the old annotation. I did notice that pressing left
arrow one too many times leads to exit, dunno if that's intended.

-Mike

2011-02-23 14:50:48

by Ingo Molnar

[permalink] [raw]
Subject: Re: [GIT PULL 0/2] perf/core TUI live annotate and a cleanup


* Mike Galbraith <[email protected]> wrote:

> Works spiffy, and no lockup troubles (didn't get back to that, koff),
> much nicer than the old annotation. I did notice that pressing left
> arrow one too many times leads to exit, dunno if that's intended.

I think it should at least ask for confirmation. Exiting on 'q' or escape
immediately would be fine.

Thanks,

Ingo

2011-02-23 15:10:55

by Arnaldo Carvalho de Melo

[permalink] [raw]
Subject: Re: [GIT PULL 0/2] perf/core TUI live annotate and a cleanup

Em Wed, Feb 23, 2011 at 03:50:26PM +0100, Ingo Molnar escreveu:
>
> * Mike Galbraith <[email protected]> wrote:
>
> > Works spiffy, and no lockup troubles (didn't get back to that, koff),
> > much nicer than the old annotation. I did notice that pressing left
> > arrow one too many times leads to exit, dunno if that's intended.
>
> I think it should at least ask for confirmation. Exiting on 'q' or escape
> immediately would be fine.

Right, I'll get the code used in 'perf report' TUI to top, matching the
experiences.

- Arnaldo