Also remove associated functions, structures, and defines
Signed-off-by: Mark Allyn <[email protected]>
---
drivers/staging/sep/TODO | 2 -
drivers/staging/sep/sep_dev.h | 25 --
drivers/staging/sep/sep_driver.c | 411 +---------------------------------
drivers/staging/sep/sep_driver_api.h | 82 -------
4 files changed, 1 insertions(+), 519 deletions(-)
diff --git a/drivers/staging/sep/TODO b/drivers/staging/sep/TODO
index a89e7d6..8f3b878 100644
--- a/drivers/staging/sep/TODO
+++ b/drivers/staging/sep/TODO
@@ -1,6 +1,4 @@
Todo's so far (from Alan Cox)
- Check whether it can be plugged into any of the kernel crypto API
interfaces - Crypto API 'glue' is still not ready to submit
-- Clean up unused ioctls - Needs vendor help
-- Clean up unused fields in ioctl structures - Needs vendor help
- Clean up un-needed debug prints - Started to work on this
diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h
index 0ffe68c..696ab0d 100644
--- a/drivers/staging/sep/sep_dev.h
+++ b/drivers/staging/sep/sep_dev.h
@@ -69,31 +69,6 @@ struct sep_device {
size_t shared_size;
void *shared_addr;
- /* restricted access region (coherent alloc) */
- dma_addr_t rar_bus;
- size_t rar_size;
- void *rar_addr;
-
- /* Firmware regions; cache is at rar for Moorestown and
- resident is at rar for Medfield */
- dma_addr_t cache_bus;
- size_t cache_size;
- void *cache_addr;
-
- dma_addr_t resident_bus;
- size_t resident_size;
- void *resident_addr;
-
- /* sep's scratchpad */
- dma_addr_t dcache_bus;
- size_t dcache_size;
- void *dcache_addr;
-
- /* Only used on Medfield */
- dma_addr_t extapp_bus;
- size_t extapp_size;
- void *extapp_addr;
-
/* start address of the access to the SEP registers from driver */
dma_addr_t reg_physical_addr;
dma_addr_t reg_physical_end;
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index d841289..71a5fbc 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -77,93 +77,6 @@
static struct sep_device *sep_dev;
/**
- * sep_load_firmware - copy firmware cache/resident
- * @sep: pointer to struct sep_device we are loading
- *
- * This functions copies the cache and resident from their source
- * location into destination shared memory.
- */
-static int sep_load_firmware(struct sep_device *sep)
-{
- const struct firmware *fw;
- char *cache_name = "cache.image.bin";
- char *res_name = "resident.image.bin";
- char *extapp_name = "extapp.image.bin";
- int error ;
- unsigned long work1, work2, work3;
-
- /* Set addresses and load resident */
- sep->resident_bus = sep->rar_bus;
- sep->resident_addr = sep->rar_addr;
-
- error = request_firmware(&fw, res_name, &sep->pdev->dev);
- if (error) {
- dev_warn(&sep->pdev->dev, "can't request resident fw\n");
- return error;
- }
-
- memcpy(sep->resident_addr, (void *)fw->data, fw->size);
- sep->resident_size = fw->size;
- release_firmware(fw);
-
- dev_dbg(&sep->pdev->dev, "resident bus is %lx\n",
- (unsigned long)sep->resident_bus);
-
- /* Set addresses for dcache (no loading needed) */
- work1 = (unsigned long)sep->resident_bus;
- work2 = (unsigned long)sep->resident_size;
- work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000;
- sep->dcache_bus = (dma_addr_t)work3;
-
- work1 = (unsigned long)sep->resident_addr;
- work2 = (unsigned long)sep->resident_size;
- work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000;
- sep->dcache_addr = (void *)work3;
-
- sep->dcache_size = 1024 * 128;
-
- /* Set addresses and load cache */
- sep->cache_bus = sep->dcache_bus + sep->dcache_size;
- sep->cache_addr = sep->dcache_addr + sep->dcache_size;
-
- error = request_firmware(&fw, cache_name, &sep->pdev->dev);
- if (error) {
- dev_warn(&sep->pdev->dev, "Unable to request cache firmware\n");
- return error;
- }
-
- memcpy(sep->cache_addr, (void *)fw->data, fw->size);
- sep->cache_size = fw->size;
- release_firmware(fw);
-
- dev_dbg(&sep->pdev->dev, "cache bus is %08lx\n",
- (unsigned long)sep->cache_bus);
-
- /* Set addresses and load extapp */
- sep->extapp_bus = sep->cache_bus + (1024 * 370);
- sep->extapp_addr = sep->cache_addr + (1024 * 370);
-
- error = request_firmware(&fw, extapp_name, &sep->pdev->dev);
- if (error) {
- dev_warn(&sep->pdev->dev, "Unable to request extapp firmware\n");
- return error;
- }
-
- memcpy(sep->extapp_addr, (void *)fw->data, fw->size);
- sep->extapp_size = fw->size;
- release_firmware(fw);
-
- dev_dbg(&sep->pdev->dev, "extapp bus is %08llx\n",
- (unsigned long long)sep->extapp_bus);
-
- return error;
-}
-
-MODULE_FIRMWARE("sep/cache.image.bin");
-MODULE_FIRMWARE("sep/resident.image.bin");
-MODULE_FIRMWARE("sep/extapp.image.bin");
-
-/**
* sep_dump_message - dump the message that is pending
* @sep: SEP device
*/
@@ -2282,58 +2195,6 @@ end_function:
}
-
-/**
- * sep_create_sync_dma_tables_handler - create sync DMA tables
- * @sep: pointer to struct sep_device
- * @arg: pointer to struct bld_syn_tab_struct
- *
- * Handle the request for creation of the DMA tables for the synchronic
- * symmetric operations (AES,DES). Note that all bus addresses that are
- * passed to the SEP are in 32 bit format; the SEP is a 32 bit device
- */
-static int sep_create_sync_dma_tables_handler(struct sep_device *sep,
- unsigned long arg)
-{
- int error = 0;
-
- /* Command arguments */
- struct bld_syn_tab_struct command_args;
-
- if (copy_from_user(&command_args, (void __user *)arg,
- sizeof(struct bld_syn_tab_struct))) {
- error = -EFAULT;
- goto end_function;
- }
-
- dev_dbg(&sep->pdev->dev, "create dma table handler app_in_address is %08llx\n",
- command_args.app_in_address);
- dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n",
- command_args.app_out_address);
- dev_dbg(&sep->pdev->dev, "data_size is %u\n",
- command_args.data_in_size);
- dev_dbg(&sep->pdev->dev, "block_size is %u\n",
- command_args.block_size);
-
- /* Validate user parameters */
- if (!command_args.app_in_address) {
- error = -EINVAL;
- goto end_function;
- }
-
- error = sep_prepare_input_output_dma_table_in_dcb(sep,
- (unsigned long)command_args.app_in_address,
- (unsigned long)command_args.app_out_address,
- command_args.data_in_size,
- command_args.block_size,
- 0x0,
- false,
- false);
-
-end_function:
- return error;
-}
-
/**
* sep_free_dma_tables_and_dcb - free DMA tables and DCBs
* @sep: pointer to struct sep_device
@@ -2411,204 +2272,6 @@ static int sep_get_static_pool_addr_handler(struct sep_device *sep)
}
/**
- * sep_start_handler - start device
- * @sep: pointer to struct sep_device
- */
-static int sep_start_handler(struct sep_device *sep)
-{
- unsigned long reg_val;
- unsigned long error = 0;
-
- /* Wait in polling for message from SEP */
- do {
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- } while (!reg_val);
-
- /* Check the value */
- if (reg_val == 0x1)
- /* Fatal error - read error status from GPRO */
- error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
- return error;
-}
-
-/**
- * ep_check_sum_calc - checksum messages
- * @data: buffer to checksum
- * @length: buffer size
- *
- * This function performs a checksum for messages that are sent
- * to the SEP.
- */
-static u32 sep_check_sum_calc(u8 *data, u32 length)
-{
- u32 sum = 0;
- u16 *Tdata = (u16 *)data;
-
- while (length > 1) {
- /* This is the inner loop */
- sum += *Tdata++;
- length -= 2;
- }
-
- /* Add left-over byte, if any */
- if (length > 0)
- sum += *(u8 *)Tdata;
-
- /* Fold 32-bit sum to 16 bits */
- while (sum>>16)
- sum = (sum & 0xffff) + (sum >> 16);
-
- return ~sum & 0xFFFF;
-}
-
-/**
- * sep_init_handler -
- * @sep: pointer to struct sep_device
- * @arg: parameters from user space application
- *
- * Handles the request for SEP initialization
- * Note that this will go away for Medfield once the SCU
- * SEP initialization is complete
- * Also note that the message to the SEP has components
- * from user space as well as components written by the driver
- * This is becuase the portions of the message that pertain to
- * physical addresses must be set by the driver after the message
- * leaves custody of the user space application for security
- * reasons.
- */
-static int sep_init_handler(struct sep_device *sep, unsigned long arg)
-{
- u32 message_buff[14];
- u32 counter;
- int error = 0;
- u32 reg_val;
- dma_addr_t new_base_addr;
- unsigned long addr_hold;
- struct init_struct command_args;
-
- /* Make sure that we have not initialized already */
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
-
- if (reg_val != 0x2) {
- error = SEP_ALREADY_INITIALIZED_ERR;
- dev_dbg(&sep->pdev->dev, "init; device already initialized\n");
- goto end_function;
- }
-
- /* Only root can initialize */
- if (!capable(CAP_SYS_ADMIN)) {
- error = -EACCES;
- goto end_function;
- }
-
- /* Copy in the parameters */
- error = copy_from_user(&command_args, (void __user *)arg,
- sizeof(struct init_struct));
-
- if (error) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Validate parameters */
- if (!command_args.message_addr || !command_args.sep_sram_addr ||
- command_args.message_size_in_words > 14) {
- error = -EINVAL;
- goto end_function;
- }
-
- /* Copy in the SEP init message */
- addr_hold = (unsigned long)command_args.message_addr;
- error = copy_from_user(message_buff,
- (void __user *)addr_hold,
- command_args.message_size_in_words*sizeof(u32));
-
- if (error) {
- error = -EFAULT;
- goto end_function;
- }
-
- /* Load resident, cache, and extapp firmware */
- error = sep_load_firmware(sep);
-
- if (error) {
- dev_warn(&sep->pdev->dev,
- "init; copy SEP init message failed %x\n", error);
- goto end_function;
- }
-
- /* Compute the base address */
- new_base_addr = sep->shared_bus;
-
- if (sep->resident_bus < new_base_addr)
- new_base_addr = sep->resident_bus;
-
- if (sep->cache_bus < new_base_addr)
- new_base_addr = sep->cache_bus;
-
- if (sep->dcache_bus < new_base_addr)
- new_base_addr = sep->dcache_bus;
-
- /* Put physical addresses in SEP message */
- message_buff[3] = (u32)new_base_addr;
- message_buff[4] = (u32)sep->shared_bus;
- message_buff[6] = (u32)sep->resident_bus;
- message_buff[7] = (u32)sep->cache_bus;
- message_buff[8] = (u32)sep->dcache_bus;
-
- message_buff[command_args.message_size_in_words - 1] = 0x0;
- message_buff[command_args.message_size_in_words - 1] =
- sep_check_sum_calc((u8 *)message_buff,
- command_args.message_size_in_words*sizeof(u32));
-
- /* Debug print of message */
- for (counter = 0; counter < command_args.message_size_in_words;
- counter++)
- dev_dbg(&sep->pdev->dev, "init; SEP message word %d is %x\n",
- counter, message_buff[counter]);
-
- /* Tell the SEP the sram address */
- sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, command_args.sep_sram_addr);
-
- /* Push the message to the SEP */
- for (counter = 0; counter < command_args.message_size_in_words;
- counter++) {
- sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR,
- message_buff[counter]);
- sep_wait_sram_write(sep);
- }
-
- /* Signal SEP that message is ready and to init */
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1);
-
- /* Wait for acknowledge */
-
- do {
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- } while (!(reg_val & 0xFFFFFFFD));
-
- if (reg_val == 0x1) {
- dev_warn(&sep->pdev->dev, "init; device int failed\n");
- error = sep_read_reg(sep, 0x8060);
- dev_warn(&sep->pdev->dev, "init; sw monitor is %x\n", error);
- error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR);
- dev_warn(&sep->pdev->dev, "init; error is %x\n", error);
- goto end_function;
- }
- /* Signal SEP to zero the GPR3 */
- sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x10);
-
- /* Wait for response */
-
- do {
- reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
- } while (reg_val != 0);
-
-end_function:
- return error;
-}
-
-/**
* sep_end_transaction_handler - end transaction
* @sep: pointer to struct sep_device
*
@@ -2748,30 +2411,6 @@ end_function:
}
/**
- * sep_realloc_ext_cache_handler - report location of extcache
- * @sep: pointer to struct sep_device
- * @arg: pointer to user parameters
- *
- * This function tells the SEP where the extapp is located
- */
-static int sep_realloc_ext_cache_handler(struct sep_device *sep,
- unsigned long arg)
-{
- /* Holds the new ext cache address in the system memory offset */
- u32 *system_addr;
-
- /* Set value in the SYSTEM MEMORY offset */
- system_addr = (u32 *)(sep->shared_addr +
- SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES);
-
- /* Copy the physical address to the System Area for the SEP */
- system_addr[0] = SEP_EXT_CACHE_ADDR_VAL_TOKEN;
- system_addr[1] = sep->extapp_bus;
-
- return 0;
-}
-
-/**
* sep_ioctl - ioctl api
* @filp: pointer to struct file
* @cmd: command
@@ -2810,28 +2449,6 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
/* Allocate data pool */
error = sep_allocate_data_pool_memory_handler(sep, arg);
break;
- case SEP_IOCCREATESYMDMATABLE:
- /* Create DMA table for synhronic operation */
- error = sep_create_sync_dma_tables_handler(sep, arg);
- break;
- case SEP_IOCFREEDMATABLEDATA:
- /* Free the pages */
- error = sep_free_dma_table_data_handler(sep);
- break;
- case SEP_IOCSEPSTART:
- /* Start command to SEP */
- if (sep->pdev->revision == 0) /* Only for old chip */
- error = sep_start_handler(sep);
- else
- error = -EPERM; /* Not permitted on new chip */
- break;
- case SEP_IOCSEPINIT:
- /* Init command to SEP */
- if (sep->pdev->revision == 0) /* Only for old chip */
- error = sep_init_handler(sep, arg);
- else
- error = -EPERM; /* Not permitted on new chip */
- break;
case SEP_IOCGETSTATICPOOLADDR:
/* Inform the SEP the bus address of the static pool */
error = sep_get_static_pool_addr_handler(sep);
@@ -2839,12 +2456,6 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
case SEP_IOCENDTRANSACTION:
error = sep_end_transaction_handler(sep);
break;
- case SEP_IOCREALLOCEXTCACHE:
- if (sep->pdev->revision == 0) /* Only for old chip */
- error = sep_realloc_ext_cache_handler(sep, arg);
- else
- error = -EPERM; /* Not permitted on new chip */
- break;
case SEP_IOCRARPREPAREMESSAGE:
error = sep_rar_prepare_output_msg_handler(sep, arg);
break;
@@ -3213,20 +2824,6 @@ static int __devinit sep_probe(struct pci_dev *pdev,
goto end_function_error;
}
- sep->rar_size = FAKE_RAR_SIZE;
- sep->rar_addr = dma_alloc_coherent(&sep->pdev->dev,
- sep->rar_size, &sep->rar_bus, GFP_KERNEL);
- if (sep->rar_addr == NULL) {
- dev_warn(&sep->pdev->dev, "can't allocate mfld rar\n");
- error = -ENOMEM;
- goto end_function_deallocate_sep_shared_area;
- }
-
- dev_dbg(&sep->pdev->dev, "rar start is %p, phy is %llx,"
- " size is %zx\n", sep->rar_addr,
- (unsigned long long)sep->rar_bus,
- sep->rar_size);
-
/* Clear ICR register */
sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF);
@@ -3243,7 +2840,7 @@ static int __devinit sep_probe(struct pci_dev *pdev,
"sep_driver", sep);
if (error)
- goto end_function_dealloc_rar;
+ goto end_function_deallocate_sep_shared_area;
/* The new chip requires a shared area reconfigure */
if (sep->pdev->revision == 4) { /* Only for new chip */
@@ -3261,12 +2858,6 @@ static int __devinit sep_probe(struct pci_dev *pdev,
end_function_free_irq:
free_irq(pdev->irq, sep);
-end_function_dealloc_rar:
- if (sep->rar_addr)
- dma_free_coherent(&sep->pdev->dev, sep->rar_size,
- sep->rar_addr, sep->rar_bus);
- goto end_function;
-
end_function_deallocate_sep_shared_area:
/* De-allocate shared area */
sep_unmap_and_free_shared_area(sep);
diff --git a/drivers/staging/sep/sep_driver_api.h b/drivers/staging/sep/sep_driver_api.h
index 0f38d61..c3aacfc 100644
--- a/drivers/staging/sep/sep_driver_api.h
+++ b/drivers/staging/sep/sep_driver_api.h
@@ -42,48 +42,6 @@
TYPEDEFS
----------------------------------------------*/
-/*
- * Note that several members of these structres are only here
- * for campatability with the middleware; they are not used
- * by this driver.
- * All user space buffer addresses are set to aligned u64
- * in order to ensure compatibility with 64 bit systems
- */
-
-/*
- init command struct; this will go away when SCU does init
-*/
-struct init_struct {
- /* address that SEP can access for message */
- aligned_u64 message_addr;
-
- /* message size */
- u32 message_size_in_words;
-
- /* offset of the init message in the sep sram */
- u32 sep_sram_addr;
-
- /* -not used- resident size in bytes*/
- u32 unused_resident_size_in_bytes;
-
- /* -not used- cache size in bytes*/
- u32 unused_cache_size_in_bytes;
-
- /* -not used- ext cache current address */
- aligned_u64 unused_extcache_addr;
-
- /* -not used- ext cache size in bytes*/
- u32 unused_extcache_size_in_bytes;
-};
-
-struct realloc_ext_struct {
- /* -not used- current external cache address */
- aligned_u64 unused_ext_cache_addr;
-
- /* -not used- external cache size in bytes*/
- u32 unused_ext_cache_size_in_bytes;
-};
-
struct alloc_struct {
/* offset from start of shared pool area */
u32 offset;
@@ -91,29 +49,6 @@ struct alloc_struct {
u32 num_bytes;
};
-/*
- Note that all app addresses are cast as u32; the sep
- middleware sends them as fixed 32 bit words
-*/
-struct bld_syn_tab_struct {
- /* address value of the data in (user space addr) */
- aligned_u64 app_in_address;
-
- /* size of data in */
- u32 data_in_size;
-
- /* address of the data out (user space addr) */
- aligned_u64 app_out_address;
-
- /* the size of the block of the operation - if needed,
- every table will be modulo this parameter */
- u32 block_size;
-
- /* -not used- distinct user/kernel layout */
- bool isKernelVirtualAddress;
-
-};
-
/* command struct for getting caller id value and address */
struct caller_id_struct {
/* pid of the process */
@@ -253,10 +188,6 @@ struct sep_lli_entry {
#define SEP_IOCALLOCDATAPOLL \
_IOW(SEP_IOC_MAGIC_NUMBER, 2, struct alloc_struct)
-/* create sym dma lli tables */
-#define SEP_IOCCREATESYMDMATABLE \
- _IOW(SEP_IOC_MAGIC_NUMBER, 5, struct bld_syn_tab_struct)
-
/* free dynamic data aalocated during table creation */
#define SEP_IOCFREEDMATABLEDATA \
_IO(SEP_IOC_MAGIC_NUMBER, 7)
@@ -265,23 +196,10 @@ struct sep_lli_entry {
#define SEP_IOCGETSTATICPOOLADDR \
_IO(SEP_IOC_MAGIC_NUMBER, 8)
-/* start sep command */
-#define SEP_IOCSEPSTART \
- _IO(SEP_IOC_MAGIC_NUMBER, 12)
-
-/* init sep command */
-#define SEP_IOCSEPINIT \
- _IOW(SEP_IOC_MAGIC_NUMBER, 13, struct init_struct)
-
/* end transaction command */
#define SEP_IOCENDTRANSACTION \
_IO(SEP_IOC_MAGIC_NUMBER, 15)
-/* reallocate external app; unused structure still needed for
- * compatability with middleware */
-#define SEP_IOCREALLOCEXTCACHE \
- _IOW(SEP_IOC_MAGIC_NUMBER, 18, struct realloc_ext_struct)
-
#define SEP_IOCRARPREPAREMESSAGE \
_IOW(SEP_IOC_MAGIC_NUMBER, 20, struct rar_hndl_to_bus_struct)
--
1.6.3.3