Patch Series looks ok.
On 2019-10-24 1:27 p.m., Chris Packham wrote:
> This is ported this from Broadcom's XLDK (now heavily modified). There seem to
> be 3 different IP blocks for 3 separate banks of GPIOs in the iProc chips.
>
> I've dropped everything except support for the Chip Common A GPIO
> controller because the other blocks actually seem to be supportable with
> other drivers. The driver itself is halfway between pinctrl-nsp-gpio.c
> and pinctrl-iproc-gpio.c.
>
> Chris Packham (2):
> dt-bindings: gpio: brcm: Add bindings for xgs-iproc
> gpio: Add xgs-iproc driver
Acked-by: Scott Branden <[email protected]>
>
> .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 70 ++++
> drivers/gpio/Kconfig | 9 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-xgs-iproc.c | 321 ++++++++++++++++++
> 4 files changed, 401 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> create mode 100644 drivers/gpio/gpio-xgs-iproc.c
>