Hi,
HWMON Driver for Dialog Semiconductor DA9052 PMICs.
Changes made since last submission:
. Changed the return format for charging current, bat temperature
and junction temperature
. conversion of temperature to mill degree
Signed-off-by: D. Chen <[email protected]>
---
diff -Naur linux-next-20110421.orig/Documentation/hwmon/da9052 linux-next-20110421/Documentation/hwmon/da9052
--- linux-next-20110421.orig/Documentation/hwmon/da9052 1970-01-01 05:00:00.000000000 +0500
+++ linux-next-20110421/Documentation/hwmon/da9052 2011-04-26 14:58:54.000000000 +0500
@@ -0,0 +1,54 @@
+Kernel driver da9052-hwmon
+==========================
+
+Supported chips:
+ * Dialog Semiconductors DA9052 PMICs
+ Prefix: 'da9052'
+ Datasheet: Kindly visit http://www.dialog-semiconductor.com and request for the
+ official datasheet.
+
+Authors: David Dajun Chen <[email protected]>
+
+Description
+-----------
+
+The DA9052 provides an Analogue to Digital Converter (ADC) with 10 bits
+resolution and track and hold circuitry combined with an analogue input
+multiplexer. The analogue input multiplexer will allow conversion of up to 10
+different inputs. The track and hold circuit ensures stable input voltages at
+the input of the ADC during the conversion.
+
+The ADC is used to measure the following inputs:
+Channel 0: VDDOUT - measurement of the system voltage
+Channel 1: ICH - internal battery charger current measurement
+Channel 2: TBAT - output from the battery NTC
+Channel 3: VBAT - measurement of the battery voltage
+Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
+Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
+Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
+Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
+screen resistive potentiometers
+Channel 8: Internal Tjunc. - sense (internal temp. sensor)
+Channel 9: VBBAT - measurement of the backup battery voltage
+
+By using sysfs attributes we can measure the system voltage VDDOUT, the battery
+charging current ICH, battery temperature TBAT, battery junction temperature
+TJUNC, battery voltage VBAT and the back up battery voltage VBBAT.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 10 bit ADC. Voltages in millivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 10 bit ADC. Chip and battery temperatures
+are available. The chip temperature is calculated as:
+
+ Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.
+
diff -Naur linux-next-20110421.orig/drivers/hwmon/da9052-hwmon.c linux-next-20110421/drivers/hwmon/da9052-hwmon.c
--- linux-next-20110421.orig/drivers/hwmon/da9052-hwmon.c 1970-01-01 05:00:00.000000000 +0500
+++ linux-next-20110421/drivers/hwmon/da9052-hwmon.c 2011-04-26 14:16:50.000000000 +0500
@@ -0,0 +1,329 @@
+/*
+ * HWMON Driver for Dialog DA9052
+ *
+ * Copyright(c) 2009 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+#define DA9052_ADC_CHANNELS(id, func_name, name)\
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,\
+ NULL, name);\
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, func_name,\
+ NULL, name)
+
+struct da9052_hwmon {
+ struct da9052 *da9052;
+ struct device *class_device;
+ struct mutex hwmon_lock;
+};
+
+static const char *input_names[] = {
+ [DA9052_ADC_VDDOUT] = "VDDOUT",
+ [DA9052_ADC_ICH] = "CHARGING CURRENT",
+ [DA9052_ADC_TBAT] = "BATTERY TEMP",
+ [DA9052_ADC_VBAT] = "BATTERY VOLTAGE",
+ [DA9052_ADC_IN4] = "ADC IN4",
+ [DA9052_ADC_IN5] = "ADC IN5",
+ [DA9052_ADC_IN6] = "ADC IN6",
+ [DA9052_ADC_TJUNC] = "BATTERY JUNCTION TEMP",
+ [DA9052_ADC_VBBAT] = "BACK-UP BATTERY VOLTAGE",
+};
+
+static int da9052_enable_vddout_channel(struct da9052 *da9052)
+{
+ int ret;
+
+ ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
+ if (ret < 0)
+ return ret;
+
+ ret |= DA9052_ADCCONT_AUTOVDDEN;
+ return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
+}
+
+static int da9052_disable_vddout_channel(struct da9052 *da9052)
+{
+ int ret;
+
+ ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~DA9052_ADCCONT_AUTOVDDEN;
+ return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
+
+}
+
+static ssize_t da9052_read_vddout(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret = -EIO;
+
+ mutex_lock(&hwmon->hwmon_lock);
+
+ ret = da9052_enable_vddout_channel(hwmon->da9052);
+ if (ret < 0)
+ goto hwmon_err;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_VDD_RES_REG);
+ if (ret < 0)
+ goto hwmon_err;
+
+ ret = da9052_disable_vddout_channel(hwmon->da9052);
+ if (ret < 0)
+ goto hwmon_err;
+
+ mutex_unlock(&hwmon->hwmon_lock);
+ return sprintf(buf, "%u\n", ret);
+
+hwmon_err:
+ mutex_unlock(&hwmon->hwmon_lock);
+ return ret;
+}
+
+static ssize_t da9052_read_ich(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_ICHG_AV_REG);
+ if (ret < 0)
+ return ret;
+
+ /* Equivalent to 3.9mA/bit in register ICHG_AV */
+ ret = DIV_ROUND_CLOSEST(ret * 39, 10);
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t da9052_read_tbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_TBAT_RES_REG);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = (512.18-ret) / 1.0983 */
+ ret = 512180 - (ret * 1000);
+ ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t da9052_read_vbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBAT);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", ret);
+}
+
+static ssize_t da9052_read_misc_channel(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(devattr)->index;
+ int ret;
+
+ ret = da9052_adc_manual_read(hwmon->da9052, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", ret);
+}
+
+static ssize_t da9052_read_tjunc(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int temp;
+ int ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_TJUNC_RES_REG);
+ if (ret < 0)
+ return ret;
+
+ temp = ret;
+
+ ret = da9052_reg_read(hwmon->da9052, DA9052_T_OFFSET_REG);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 */
+ ret = 1708 * (temp - ret) - 108800;
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t da9052_read_vbbat(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
+ int ret;
+
+ ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBBAT);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", ret);
+
+}
+
+static ssize_t da9052_hwmon_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "da9052-hwmon\n");
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", input_names[to_sensor_dev_attr(devattr)->index]);
+}
+
+DA9052_ADC_CHANNELS(0, da9052_read_vddout, DA9052_ADC_VDDOUT);
+DA9052_ADC_CHANNELS(3, da9052_read_vbat, DA9052_ADC_VBAT);
+DA9052_ADC_CHANNELS(4, da9052_read_misc_channel, DA9052_ADC_IN4);
+DA9052_ADC_CHANNELS(5, da9052_read_misc_channel, DA9052_ADC_IN5);
+DA9052_ADC_CHANNELS(6, da9052_read_misc_channel, DA9052_ADC_IN6);
+DA9052_ADC_CHANNELS(9, da9052_read_vbbat, DA9052_ADC_VBBAT);
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, da9052_read_ich, NULL,
+ DA9052_ADC_ICH);
+static SENSOR_DEVICE_ATTR(curr1_label, S_IRUGO, show_label, NULL,
+ DA9052_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9052_read_tbat, NULL,
+ DA9052_ADC_TBAT);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+ DA9052_ADC_TBAT);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9052_read_tjunc, NULL,
+ DA9052_ADC_TJUNC);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+ DA9052_ADC_TJUNC);
+
+static DEVICE_ATTR(name, S_IRUGO, da9052_hwmon_show_name, NULL);
+
+static struct attribute *da9052_attr[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_label.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in9_label.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group da9052_attr_group = {.attrs = da9052_attr};
+
+static int __init da9052_hwmon_probe(struct platform_device *pdev)
+{
+ struct da9052_hwmon *hwmon;
+ int ret;
+
+ hwmon = kzalloc(sizeof(struct da9052_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ mutex_init(&hwmon->hwmon_lock);
+ hwmon->da9052 = dev_get_drvdata(pdev->dev.parent);
+
+ platform_set_drvdata(pdev, hwmon);
+
+ hwmon->class_device = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->class_device)) {
+ ret = PTR_ERR(hwmon->class_device);
+ goto err_mem;
+ }
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &da9052_attr_group);
+ if (ret)
+ goto err_sysfs;
+
+ return 0;
+
+err_sysfs:
+ hwmon_device_unregister(hwmon->class_device);
+err_mem:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit da9052_hwmon_remove(struct platform_device *pdev)
+{
+ struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ mutex_destroy(&hwmon->hwmon_lock);
+ hwmon_device_unregister(hwmon->class_device);
+ sysfs_remove_group(&pdev->dev.kobj, &da9052_attr_group);
+ kfree(hwmon);
+
+ return 0;
+}
+
+static struct platform_driver da9052_hwmon_driver = {
+ .driver = {
+ .name = "da9052-hwmon",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9052_hwmon_probe,
+ .remove = __devexit_p(da9052_hwmon_remove),
+
+};
+
+static int __init da9052_hwmon_init(void)
+{
+
+ return platform_driver_register(&da9052_hwmon_driver);
+}
+module_init(da9052_hwmon_init);
+
+static void __exit da9052_hwmon_exit(void)
+{
+ platform_driver_unregister(&da9052_hwmon_driver);
+}
+module_exit(da9052_hwmon_exit);
+
+MODULE_AUTHOR("David Dajun Chen <[email protected]>");
+MODULE_DESCRIPTION("DA9052 ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:da9052-hwmon");
diff -Naur linux-next-20110421.orig/drivers/hwmon/Kconfig linux-next-20110421/drivers/hwmon/Kconfig
--- linux-next-20110421.orig/drivers/hwmon/Kconfig 2011-04-26 09:31:34.000000000 +0500
+++ linux-next-20110421/drivers/hwmon/Kconfig 2011-04-26 14:27:08.000000000 +0500
@@ -303,6 +303,16 @@
This driver can also be built as a module. If so, the module
will be called ds1621.
+config SENSORS_DA9052_ADC
+ tristate "Dialog DA9052 HWMON"
+ depends on PMIC_DA9052
+ help
+ Say y here to support the ADC found on
+ Dialog Semiconductor DA9052 PMIC.
+
+ This driver can also be built as module. If so, the module
+ will be called da9052-hwmon.
+
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI && EXPERIMENTAL
diff -Naur linux-next-20110421.orig/drivers/hwmon/Makefile linux-next-20110421/drivers/hwmon/Makefile
--- linux-next-20110421.orig/drivers/hwmon/Makefile 2011-04-26 09:31:34.000000000 +0500
+++ linux-next-20110421/drivers/hwmon/Makefile 2011-04-26 14:24:49.000000000 +0500
@@ -41,6 +41,7 @@
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_PKGTEMP) += pkgtemp.o
+obj-$(CONFIG_SENSORS_DA9052_ADC) += da9052-hwmon.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS620) += ds620.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
Regards,
Ashish
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?
On Tue, 2011-04-26 at 07:36 -0400, Ashish Jangam wrote:
> Hi,
>
> HWMON Driver for Dialog Semiconductor DA9052 PMICs.
>
> Changes made since last submission:
> . Changed the return format for charging current, bat temperature
> and junction temperature
> . conversion of temperature to mill degree
>
> Signed-off-by: D. Chen <[email protected]>
Full name here please.
Before resubmitting, please fix all checkpatch errors and warnings.
The patch format (especially with added text at the end) violates
Documentation/SubmittingPatches, #15, and actually makes it impossible
to integrate the patch without manually editing it. Please follow the
canonical patch format.
> ---
>
> diff -Naur linux-next-20110421.orig/Documentation/hwmon/da9052 linux-next-20110421/Documentation/hwmon/da9052
> --- linux-next-20110421.orig/Documentation/hwmon/da9052 1970-01-01 05:00:00.000000000 +0500
> +++ linux-next-20110421/Documentation/hwmon/da9052 2011-04-26 14:58:54.000000000 +0500
> @@ -0,0 +1,54 @@
> +Kernel driver da9052-hwmon
> +==========================
> +
> +Supported chips:
> + * Dialog Semiconductors DA9052 PMICs
> + Prefix: 'da9052'
> + Datasheet: Kindly visit http://www.dialog-semiconductor.com and request for the
> + official datasheet.
> +
> +Authors: David Dajun Chen <[email protected]>
> +
> +Description
> +-----------
> +
> +The DA9052 provides an Analogue to Digital Converter (ADC) with 10 bits
> +resolution and track and hold circuitry combined with an analogue input
> +multiplexer. The analogue input multiplexer will allow conversion of up to 10
> +different inputs. The track and hold circuit ensures stable input voltages at
> +the input of the ADC during the conversion.
> +
> +The ADC is used to measure the following inputs:
> +Channel 0: VDDOUT - measurement of the system voltage
> +Channel 1: ICH - internal battery charger current measurement
> +Channel 2: TBAT - output from the battery NTC
> +Channel 3: VBAT - measurement of the battery voltage
> +Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
> +Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
> +Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
> +Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
> +screen resistive potentiometers
> +Channel 8: Internal Tjunc. - sense (internal temp. sensor)
> +Channel 9: VBBAT - measurement of the backup battery voltage
> +
> +By using sysfs attributes we can measure the system voltage VDDOUT, the battery
> +charging current ICH, battery temperature TBAT, battery junction temperature
> +TJUNC, battery voltage VBAT and the back up battery voltage VBBAT.
> +
> +Voltage Monitoring
> +------------------
> +
> +Voltages are sampled by a 10 bit ADC. Voltages in millivolts are 1.465
> +times the ADC value.
> +
> +Temperature Monitoring
> +----------------------
> +
> +Temperatures are sampled by a 10 bit ADC. Chip and battery temperatures
> +are available. The chip temperature is calculated as:
> +
> + Degrees celsius = (512.18 - data) / 1.0983
> +
> +while the battery temperature calculation will depend on the NTC
> +thermistor component.
> +
You have tbat and tjunc. The tbat calculation is the one described here,
yet you say that it would be the chip temperature, and that it would
depend on the NTC. The tjunc calculation (which one would assume to be
the chip temperature) is not mentioned/documented here. This is a bit
confusing. Can you clarify ?
> diff -Naur linux-next-20110421.orig/drivers/hwmon/da9052-hwmon.c linux-next-20110421/drivers/hwmon/da9052-hwmon.c
> --- linux-next-20110421.orig/drivers/hwmon/da9052-hwmon.c 1970-01-01 05:00:00.000000000 +0500
> +++ linux-next-20110421/drivers/hwmon/da9052-hwmon.c 2011-04-26 14:16:50.000000000 +0500
> @@ -0,0 +1,329 @@
> +/*
> + * HWMON Driver for Dialog DA9052
> + *
> + * Copyright(c) 2009 Dialog Semiconductor Ltd.
> + *
2011 ?
> + * Author: David Dajun Chen <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/hwmon.h>
> +#include <linux/slab.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/da9052/da9052.h>
> +#include <linux/mfd/da9052/reg.h>
> +
> +#define DA9052_ADC_CHANNELS(id, func_name, name)\
> + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label,\
> + NULL, name);\
> + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, func_name,\
> + NULL, name)
> +
This macro results in a checkpatch error. I would suggest to get rid of
it entirely.
> +struct da9052_hwmon {
> + struct da9052 *da9052;
> + struct device *class_device;
> + struct mutex hwmon_lock;
> +};
> +
> +static const char *input_names[] = {
> + [DA9052_ADC_VDDOUT] = "VDDOUT",
> + [DA9052_ADC_ICH] = "CHARGING CURRENT",
> + [DA9052_ADC_TBAT] = "BATTERY TEMP",
> + [DA9052_ADC_VBAT] = "BATTERY VOLTAGE",
> + [DA9052_ADC_IN4] = "ADC IN4",
> + [DA9052_ADC_IN5] = "ADC IN5",
> + [DA9052_ADC_IN6] = "ADC IN6",
> + [DA9052_ADC_TJUNC] = "BATTERY JUNCTION TEMP",
> + [DA9052_ADC_VBBAT] = "BACK-UP BATTERY VOLTAGE",
> +};
> +
> +static int da9052_enable_vddout_channel(struct da9052 *da9052)
> +{
> + int ret;
> +
> + ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
> + if (ret < 0)
> + return ret;
> +
> + ret |= DA9052_ADCCONT_AUTOVDDEN;
> + return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
> +}
> +
> +static int da9052_disable_vddout_channel(struct da9052 *da9052)
> +{
> + int ret;
> +
> + ret = da9052_reg_read(da9052, DA9052_ADC_CONT_REG);
> + if (ret < 0)
> + return ret;
> +
> + ret &= ~DA9052_ADCCONT_AUTOVDDEN;
> + return da9052_reg_write(da9052, DA9052_ADC_CONT_REG, ret);
> +
> +}
> +
> +static ssize_t da9052_read_vddout(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int ret = -EIO;
> +
No need to initialize ret.
> + mutex_lock(&hwmon->hwmon_lock);
> +
> + ret = da9052_enable_vddout_channel(hwmon->da9052);
> + if (ret < 0)
> + goto hwmon_err;
> +
> + ret = da9052_reg_read(hwmon->da9052, DA9052_VDD_RES_REG);
> + if (ret < 0)
> + goto hwmon_err;
> +
This means the function will exist without even trying to disable the
vddout channel. Is this acceptable ?
> + ret = da9052_disable_vddout_channel(hwmon->da9052);
> + if (ret < 0)
> + goto hwmon_err;
> +
> + mutex_unlock(&hwmon->hwmon_lock);
> + return sprintf(buf, "%u\n", ret);
You sometimes use %u and sometimes %d, even if the variable is known to
be non-negative. Since the variable is always declared as int, please
use %d throughout.
> +
> +hwmon_err:
> + mutex_unlock(&hwmon->hwmon_lock);
> + return ret;
> +}
> +
> +static ssize_t da9052_read_ich(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = da9052_reg_read(hwmon->da9052, DA9052_ICHG_AV_REG);
> + if (ret < 0)
> + return ret;
> +
> + /* Equivalent to 3.9mA/bit in register ICHG_AV */
> + ret = DIV_ROUND_CLOSEST(ret * 39, 10);
> + return sprintf(buf, "%d\n", ret);
> +}
> +
> +static ssize_t da9052_read_tbat(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = da9052_reg_read(hwmon->da9052, DA9052_TBAT_RES_REG);
> + if (ret < 0)
> + return ret;
> +
> + /* Degrees celsius = (512.18-ret) / 1.0983 */
> + ret = 512180 - (ret * 1000);
> + ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
> + return sprintf(buf, "%d\n", ret);
If the original value of ret is 0, the maximum possible value for ret
during calculation is 512180 * 10000 = 5,121,800,000 which is above the
32 bit (or, rather, 31 bit) integer range. You might want to use s64 to
avoid overflows.
> +}
> +
> +static ssize_t da9052_read_vbat(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBAT);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%u\n", ret);
> +}
> +
> +static ssize_t da9052_read_misc_channel(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(devattr)->index;
> + int ret;
> +
> + ret = da9052_adc_manual_read(hwmon->da9052, channel);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%u\n", ret);
> +}
> +
> +static ssize_t da9052_read_tjunc(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int temp;
> + int ret;
> +
> + ret = da9052_reg_read(hwmon->da9052, DA9052_TJUNC_RES_REG);
> + if (ret < 0)
> + return ret;
> +
> + temp = ret;
> +
> + ret = da9052_reg_read(hwmon->da9052, DA9052_T_OFFSET_REG);
> + if (ret < 0)
> + return ret;
> +
> + /* Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 */
> + ret = 1708 * (temp - ret) - 108800;
> + return sprintf(buf, "%d\n", ret);
> +}
> +
> +static ssize_t da9052_read_vbbat(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + struct da9052_hwmon *hwmon = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = da9052_adc_manual_read(hwmon->da9052, DA9052_ADC_VBBAT);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%u\n", ret);
> +
> +}
> +
> +static ssize_t da9052_hwmon_show_name(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + return sprintf(buf, "da9052-hwmon\n");
> +}
> +
> +static ssize_t show_label(struct device *dev,
> + struct device_attribute *devattr, char *buf)
> +{
> + return sprintf(buf, "%s\n", input_names[to_sensor_dev_attr(devattr)->index]);
> +}
> +
> +DA9052_ADC_CHANNELS(0, da9052_read_vddout, DA9052_ADC_VDDOUT);
> +DA9052_ADC_CHANNELS(3, da9052_read_vbat, DA9052_ADC_VBAT);
> +DA9052_ADC_CHANNELS(4, da9052_read_misc_channel, DA9052_ADC_IN4);
> +DA9052_ADC_CHANNELS(5, da9052_read_misc_channel, DA9052_ADC_IN5);
> +DA9052_ADC_CHANNELS(6, da9052_read_misc_channel, DA9052_ADC_IN6);
> +DA9052_ADC_CHANNELS(9, da9052_read_vbbat, DA9052_ADC_VBBAT);
> +static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, da9052_read_ich, NULL,
> + DA9052_ADC_ICH);
> +static SENSOR_DEVICE_ATTR(curr1_label, S_IRUGO, show_label, NULL,
> + DA9052_ADC_TJUNC);
> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, da9052_read_tbat, NULL,
> + DA9052_ADC_TBAT);
> +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
> + DA9052_ADC_TBAT);
> +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, da9052_read_tjunc, NULL,
> + DA9052_ADC_TJUNC);
> +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
> + DA9052_ADC_TJUNC);
> +
> +static DEVICE_ATTR(name, S_IRUGO, da9052_hwmon_show_name, NULL);
> +
> +static struct attribute *da9052_attr[] = {
> + &dev_attr_name.attr,
> +
> + &sensor_dev_attr_in0_input.dev_attr.attr,
> + &sensor_dev_attr_in0_label.dev_attr.attr,
> + &sensor_dev_attr_curr1_input.dev_attr.attr,
> + &sensor_dev_attr_curr1_label.dev_attr.attr,
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + &sensor_dev_attr_temp1_label.dev_attr.attr,
> + &sensor_dev_attr_in3_input.dev_attr.attr,
> + &sensor_dev_attr_in3_label.dev_attr.attr,
> + &sensor_dev_attr_in4_input.dev_attr.attr,
> + &sensor_dev_attr_in4_label.dev_attr.attr,
> + &sensor_dev_attr_in5_input.dev_attr.attr,
> + &sensor_dev_attr_in5_label.dev_attr.attr,
> + &sensor_dev_attr_in6_input.dev_attr.attr,
> + &sensor_dev_attr_in6_label.dev_attr.attr,
> + &sensor_dev_attr_temp2_input.dev_attr.attr,
> + &sensor_dev_attr_temp2_label.dev_attr.attr,
> + &sensor_dev_attr_in9_input.dev_attr.attr,
> + &sensor_dev_attr_in9_label.dev_attr.attr,
> + NULL
> +};
> +
> +static const struct attribute_group da9052_attr_group = {.attrs = da9052_attr};
> +
> +static int __init da9052_hwmon_probe(struct platform_device *pdev)
> +{
> + struct da9052_hwmon *hwmon;
> + int ret;
> +
> + hwmon = kzalloc(sizeof(struct da9052_hwmon), GFP_KERNEL);
> + if (!hwmon)
> + return -ENOMEM;
> +
> + mutex_init(&hwmon->hwmon_lock);
> + hwmon->da9052 = dev_get_drvdata(pdev->dev.parent);
> +
> + platform_set_drvdata(pdev, hwmon);
> +
> + hwmon->class_device = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(hwmon->class_device)) {
> + ret = PTR_ERR(hwmon->class_device);
> + goto err_mem;
> + }
> +
> + ret = sysfs_create_group(&pdev->dev.kobj, &da9052_attr_group);
> + if (ret)
> + goto err_sysfs;
> +
Please create sysfs entries before registering the hwmon device.
> + return 0;
> +
> +err_sysfs:
> + hwmon_device_unregister(hwmon->class_device);
> +err_mem:
> + kfree(hwmon);
> + return ret;
> +}
> +
> +static int __devexit da9052_hwmon_remove(struct platform_device *pdev)
> +{
> + struct da9052_hwmon *hwmon = platform_get_drvdata(pdev);
> +
> + mutex_destroy(&hwmon->hwmon_lock);
Read functions can still be called here, resulting in trouble since the
mutex is gone. You should destroy the mutex only after unregistering the
hwmon device and after removing the sysfs entries.
> + hwmon_device_unregister(hwmon->class_device);
> + sysfs_remove_group(&pdev->dev.kobj, &da9052_attr_group);
> + kfree(hwmon);
> +
> + return 0;
> +}
> +
> +static struct platform_driver da9052_hwmon_driver = {
> + .driver = {
> + .name = "da9052-hwmon",
> + .owner = THIS_MODULE,
> + },
> + .probe = da9052_hwmon_probe,
> + .remove = __devexit_p(da9052_hwmon_remove),
> +
> +};
> +
> +static int __init da9052_hwmon_init(void)
> +{
> +
> + return platform_driver_register(&da9052_hwmon_driver);
> +}
> +module_init(da9052_hwmon_init);
> +
> +static void __exit da9052_hwmon_exit(void)
> +{
> + platform_driver_unregister(&da9052_hwmon_driver);
> +}
> +module_exit(da9052_hwmon_exit);
> +
> +MODULE_AUTHOR("David Dajun Chen <[email protected]>");
> +MODULE_DESCRIPTION("DA9052 ADC driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:da9052-hwmon");
> diff -Naur linux-next-20110421.orig/drivers/hwmon/Kconfig linux-next-20110421/drivers/hwmon/Kconfig
> --- linux-next-20110421.orig/drivers/hwmon/Kconfig 2011-04-26 09:31:34.000000000 +0500
> +++ linux-next-20110421/drivers/hwmon/Kconfig 2011-04-26 14:27:08.000000000 +0500
> @@ -303,6 +303,16 @@
> This driver can also be built as a module. If so, the module
> will be called ds1621.
>
> +config SENSORS_DA9052_ADC
> + tristate "Dialog DA9052 HWMON"
> + depends on PMIC_DA9052
> + help
> + Say y here to support the ADC found on
> + Dialog Semiconductor DA9052 PMIC.
> +
> + This driver can also be built as module. If so, the module
> + will be called da9052-hwmon.
> +
> config SENSORS_I5K_AMB
> tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
> depends on PCI && EXPERIMENTAL
> diff -Naur linux-next-20110421.orig/drivers/hwmon/Makefile linux-next-20110421/drivers/hwmon/Makefile
> --- linux-next-20110421.orig/drivers/hwmon/Makefile 2011-04-26 09:31:34.000000000 +0500
> +++ linux-next-20110421/drivers/hwmon/Makefile 2011-04-26 14:24:49.000000000 +0500
> @@ -41,6 +41,7 @@
> obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
> obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
> obj-$(CONFIG_SENSORS_PKGTEMP) += pkgtemp.o
> +obj-$(CONFIG_SENSORS_DA9052_ADC) += da9052-hwmon.o
> obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
> obj-$(CONFIG_SENSORS_DS620) += ds620.o
> obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
>
>
>
> Regards,
> Ashish
>
>