This patch adds support for the Kionix KXTJ9 digital tri-axis accelerometer.
The driver uses i2c for hardware communication, input for passing data to the
application layer, and sysfs to handle system calls. There were a few warnings
when I ran checkpatch.pl, all concerning the use of kstrto* in preference to
simple_strtoul but am concerned that this change may affect backwards
compatibility. Please let me know if I need to change anything in order to get
this merged.
From: Chris Hudson <[email protected]>
Signed-off-by: Chris Hudson <[email protected]>
---
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/kxtj9.c | 824 +++++++++++++++++++++++++++++++++++++++++++
include/linux/kxtj9.h | 76 ++++
4 files changed, 911 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/kxtj9.c
create mode 100644 include/linux/kxtj9.h
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f9cf088..567f3d2 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -467,4 +467,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
To compile this driver as a module, choose M here: the
module will be called xen-kbdfront.
+config INPUT_KXTJ9
+ tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Kionix KXTJ9 digital
+ tri-axis accelerometer.
+
+ This driver can also be built as a module. If so, the module
+ will be called kxtj9.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index e3f7984..f2477ef 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
new file mode 100644
index 0000000..42a39c7
--- /dev/null
+++ b/drivers/input/misc/kxtj9.c
@@ -0,0 +1,824 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/kxtj9.h>
+
+#define NAME "kxtj9"
+#define G_MAX 8000
+/* OUTPUT REGISTERS */
+#define XOUT_L 0x06
+#define WHO_AM_I 0x0F
+/* CONTROL REGISTERS */
+#define INT_REL 0x1A
+#define CTRL_REG1 0x1B
+#define INT_CTRL1 0x1E
+#define DATA_CTRL 0x21
+/* CONTROL REGISTER 1 BITS */
+#define PC1_OFF 0x7F
+#define PC1_ON 0x80
+/* INPUT_ABS CONSTANTS */
+#define FUZZ 3
+#define FLAT 3
+/* RESUME STATE INDICES */
+#define RES_DATA_CTRL 0
+#define RES_CTRL_REG1 1
+#define RES_INT_CTRL1 2
+#define RESUME_ENTRIES 3
+
+/*
+ * The following table lists the maximum appropriate poll interval for each
+ * available output data rate.
+ */
+struct {
+ unsigned int cutoff;
+ u8 mask;
+} kxtj9_odr_table[] = {
+ {
+ 3, ODR800F}, {
+ 5, ODR400F}, {
+ 10, ODR200F}, {
+ 20, ODR100F}, {
+ 40, ODR50F}, {
+ 80, ODR25F}, {
+ 0, ODR12_5F},
+};
+
+struct kxtj9_data {
+ struct i2c_client *client;
+ struct kxtj9_platform_data *pdata;
+ struct mutex lock;
+ struct delayed_work input_work;
+ struct input_dev *input_dev;
+ struct work_struct irq_work;
+
+ int hw_initialized;
+ atomic_t enabled;
+ u8 resume[RESUME_ENTRIES];
+ int res_interval;
+ int drdy_enabled;
+ int irq;
+};
+
+static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
+{
+ int err;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags,
+ .len = 1,
+ .buf = &addr,
+ },
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags | I2C_M_RD,
+ .len = len,
+ .buf = data,
+ },
+ };
+ err = i2c_transfer(tj9->client->adapter, msgs, 2);
+
+ if (err != 2)
+ dev_err(&tj9->client->dev, "read transfer error\n");
+ else
+ err = 0;
+
+ return err;
+}
+
+static int kxtj9_i2c_write(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
+{
+ int err;
+ int i;
+ u8 buf[len + 1];
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags,
+ .len = len + 1,
+ .buf = buf,
+ },
+ };
+
+ buf[0] = addr;
+ for (i = 0; i < len; i++)
+ buf[i + 1] = data[i];
+
+ err = i2c_transfer(tj9->client->adapter, msgs, 1);
+
+ if (err != 1)
+ dev_err(&tj9->client->dev, "write transfer error\n");
+ else
+ err = 0;
+
+ return err;
+}
+
+static int kxtj9_verify(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf;
+
+ err = kxtj9_i2c_read(tj9, WHO_AM_I, &buf, 1);
+ if (err < 0)
+ dev_err(&tj9->client->dev, "read err int source\n");
+ if (buf != 0x06)
+ err = -1;
+
+ return err;
+}
+
+int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range)
+{
+ int err;
+ u8 shift;
+ u8 buf;
+ u8 out;
+
+ switch (new_g_range) {
+ case KXTJ9_G_2G:
+ shift = SHIFT_ADJ_2G;
+ break;
+ case KXTJ9_G_4G:
+ shift = SHIFT_ADJ_4G;
+ break;
+ case KXTJ9_G_8G:
+ shift = SHIFT_ADJ_8G;
+ break;
+ default:
+ dev_err(&tj9->client->dev, "invalid g range request\n");
+ return -EINVAL;
+ }
+
+ out = (tj9->resume[RES_CTRL_REG1] & 0xE7) | new_g_range;
+ if (shift != tj9->pdata->shift_adj) {
+ if (atomic_read(&tj9->enabled)) {
+ buf = 0;
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &out, 1);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ tj9->resume[RES_CTRL_REG1] = out;
+ tj9->pdata->shift_adj = shift;
+
+ return 0;
+}
+
+int kxtj9_update_odr(struct kxtj9_data *tj9, int poll_interval)
+{
+ int err = -1;
+ int i;
+ u8 config;
+ u8 temp = 0;
+
+ /* Use the lowest ODR that can support the requested poll interval */
+ for (i = 0; i < ARRAY_SIZE(kxtj9_odr_table); i++) {
+ config = kxtj9_odr_table[i].mask;
+ if (poll_interval < kxtj9_odr_table[i].cutoff)
+ break;
+ }
+
+ if (atomic_read(&tj9->enabled)) {
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &temp, 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, DATA_CTRL, &config, 1);
+ if (err < 0)
+ return err;
+ temp = tj9->resume[RES_CTRL_REG1];
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &temp, 1);
+ if (err < 0)
+ return err;
+ /* Valid input_dev indicates that input_init passed and this
+ * workqueue is available */
+ if (tj9->input_dev) {
+ cancel_delayed_work_sync(&tj9->input_work);
+ schedule_delayed_work(&tj9->input_work,
+ msecs_to_jiffies(poll_interval));
+ }
+ }
+ tj9->resume[RES_DATA_CTRL] = config;
+
+ return 0;
+}
+
+static int kxtj9_hw_init(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf = 0;
+
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, DATA_CTRL, &tj9->resume[RES_DATA_CTRL], 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, INT_CTRL1, &tj9->resume[RES_INT_CTRL1], 1);
+ if (err < 0)
+ return err;
+
+ err = kxtj9_update_g_range(tj9, tj9->pdata->g_range);
+ if (err < 0)
+ return err;
+
+ buf = (tj9->resume[RES_CTRL_REG1] | PC1_ON);
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ return err;
+ tj9->resume[RES_CTRL_REG1] = buf;
+
+ if ((buf & DRDYE) > 0)
+ tj9->drdy_enabled = 1;
+ else
+ tj9->drdy_enabled = 0;
+
+ err = kxtj9_update_odr(tj9, tj9->res_interval);
+ if (err < 0)
+ return err;
+
+ tj9->hw_initialized = 1;
+
+ return 0;
+}
+
+static void kxtj9_device_power_off(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf;
+
+ buf = tj9->resume[RES_CTRL_REG1] & PC1_OFF;
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ dev_err(&tj9->client->dev, "soft power off failed\n");
+ disable_irq(tj9->irq);
+ if (tj9->pdata->power_off)
+ tj9->pdata->power_off();
+ tj9->resume[RES_CTRL_REG1] = buf;
+ tj9->hw_initialized = 0;
+}
+
+static int kxtj9_device_power_on(struct kxtj9_data *tj9)
+{
+ int err;
+
+ if (tj9->pdata->power_on) {
+ err = tj9->pdata->power_on();
+ if (err < 0)
+ return err;
+ }
+ enable_irq(tj9->irq);
+ if (!tj9->hw_initialized) {
+ mdelay(40);
+ err = kxtj9_hw_init(tj9);
+ if (err < 0) {
+ kxtj9_device_power_off(tj9);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static irqreturn_t kxtj9_isr(int irq, void *dev)
+{
+ struct kxtj9_data *tj9 = dev;
+
+ disable_irq_nosync(irq);
+ schedule_work(&tj9->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int kxtj9_get_acceleration_data(struct kxtj9_data *tj9, int *xyz)
+{
+ int err;
+ /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
+ u8 acc_data[6];
+ /* x,y,z hardware values */
+ int hw_d[3];
+
+ err = kxtj9_i2c_read(tj9, XOUT_L, acc_data, 6);
+ if (err < 0)
+ return err;
+
+
+ hw_d[0] = (int) (((acc_data[1]) << 8) | acc_data[0]);
+ hw_d[1] = (int) (((acc_data[3]) << 8) | acc_data[2]);
+ hw_d[2] = (int) (((acc_data[5]) << 8) | acc_data[4]);
+
+ if (hw_d[0] & 0x8000)
+ hw_d[0] |= 0xFFFF0000;
+ if (hw_d[1] & 0x8000)
+ hw_d[1] |= 0xFFFF0000;
+ if (hw_d[2] & 0x8000)
+ hw_d[2] |= 0xFFFF0000;
+
+ hw_d[0] >>= tj9->pdata->shift_adj;
+ hw_d[1] >>= tj9->pdata->shift_adj;
+ hw_d[2] >>= tj9->pdata->shift_adj;
+
+ xyz[0] = ((tj9->pdata->negate_x) ? (-hw_d[tj9->pdata->axis_map_x])
+ : (hw_d[tj9->pdata->axis_map_x]));
+ xyz[1] = ((tj9->pdata->negate_y) ? (-hw_d[tj9->pdata->axis_map_y])
+ : (hw_d[tj9->pdata->axis_map_y]));
+ xyz[2] = ((tj9->pdata->negate_z) ? (-hw_d[tj9->pdata->axis_map_z])
+ : (hw_d[tj9->pdata->axis_map_z]));
+
+ return err;
+}
+
+static void kxtj9_report_values(struct kxtj9_data *tj9, int *xyz)
+{
+ input_report_abs(tj9->input_dev, ABS_X, xyz[0]);
+ input_report_abs(tj9->input_dev, ABS_Y, xyz[1]);
+ input_report_abs(tj9->input_dev, ABS_Z, xyz[2]);
+}
+
+static void kxtj9_irq_work_func(struct work_struct *work)
+{
+ int err;
+ u8 buf;
+ int xyz[3];
+
+ struct kxtj9_data *tj9
+ = container_of(work, struct kxtj9_data, irq_work);
+
+ /* data ready is the only possible interrupt type */
+ if (kxtj9_get_acceleration_data(tj9, xyz) == 0)
+ kxtj9_report_values(tj9, xyz);
+
+ err = kxtj9_i2c_read(tj9, INT_REL, &buf, 1);
+ if (err < 0)
+ dev_err(&tj9->client->dev,
+ "error clearing interrupt status: %d\n", err);
+
+ enable_irq(tj9->irq);
+}
+
+static int kxtj9_enable(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf;
+
+ if (!atomic_cmpxchg(&tj9->enabled, 0, 1)) {
+ err = kxtj9_device_power_on(tj9);
+ err = kxtj9_i2c_read(tj9, INT_REL, &buf, 1);
+ if (err < 0) {
+ dev_err(&tj9->client->dev,
+ "error clearing interrupt: %d\n", err);
+ atomic_set(&tj9->enabled, 0);
+ return err;
+ }
+ schedule_delayed_work(&tj9->input_work,
+ msecs_to_jiffies(tj9->res_interval));
+ }
+
+ return 0;
+}
+
+static int kxtj9_disable(struct kxtj9_data *tj9)
+{
+ if (atomic_cmpxchg(&tj9->enabled, 1, 0)) {
+ cancel_delayed_work_sync(&tj9->input_work);
+ kxtj9_device_power_off(tj9);
+ }
+
+ return 0;
+}
+
+static void kxtj9_input_work_func(struct work_struct *work)
+{
+ struct kxtj9_data *tj9 = container_of((struct delayed_work *)work,
+ struct kxtj9_data, input_work);
+ int xyz[3] = { 0 };
+
+ if (tj9->drdy_enabled == 0) {
+ mutex_lock(&tj9->lock);
+
+ if (kxtj9_get_acceleration_data(tj9, xyz) == 0)
+ kxtj9_report_values(tj9, xyz);
+
+ schedule_delayed_work(&tj9->input_work,
+ msecs_to_jiffies(tj9->res_interval));
+ mutex_unlock(&tj9->lock);
+ }
+}
+
+int kxtj9_input_open(struct input_dev *input)
+{
+ struct kxtj9_data *tj9 = input_get_drvdata(input);
+
+ return kxtj9_enable(tj9);
+}
+
+void kxtj9_input_close(struct input_dev *dev)
+{
+ struct kxtj9_data *tj9 = input_get_drvdata(dev);
+
+ kxtj9_disable(tj9);
+}
+
+static int kxtj9_input_init(struct kxtj9_data *tj9)
+{
+ int err;
+
+ INIT_DELAYED_WORK(&tj9->input_work, kxtj9_input_work_func);
+ tj9->input_dev = input_allocate_device();
+ if (!tj9->input_dev) {
+ err = -ENOMEM;
+ dev_err(&tj9->client->dev, "input device allocate failed\n");
+ goto err0;
+ }
+ tj9->input_dev->open = kxtj9_input_open;
+ tj9->input_dev->close = kxtj9_input_close;
+
+ input_set_drvdata(tj9->input_dev, tj9);
+
+ set_bit(EV_ABS, tj9->input_dev->evbit);
+ set_bit(EV_REL, tj9->input_dev->evbit);
+
+ input_set_abs_params(tj9->input_dev, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(tj9->input_dev, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(tj9->input_dev, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
+
+ tj9->input_dev->name = "kxtj9_accel";
+
+ err = input_register_device(tj9->input_dev);
+ if (err) {
+ dev_err(&tj9->client->dev,
+ "unable to register input polled device %s: %d\n",
+ tj9->input_dev->name, err);
+ goto err1;
+ }
+
+ return 0;
+err1:
+ input_free_device(tj9->input_dev);
+err0:
+ return err;
+}
+
+static void kxtj9_input_cleanup(struct kxtj9_data *tj9)
+{
+ input_unregister_device(tj9->input_dev);
+}
+
+/* sysfs */
+static ssize_t kxtj9_delay_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ return sprintf(buf, "%d\n", tj9->res_interval);
+}
+
+static ssize_t kxtj9_delay_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ tj9->res_interval = max(val, tj9->pdata->min_interval);
+ kxtj9_update_odr(tj9, tj9->res_interval);
+
+ return count;
+}
+
+static ssize_t kxtj9_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ return sprintf(buf, "%d\n", atomic_read(&tj9->enabled));
+}
+
+static ssize_t kxtj9_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ if (val)
+ kxtj9_enable(tj9);
+ else
+ kxtj9_disable(tj9);
+ return count;
+}
+
+static ssize_t kxtj9_res_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ u8 val = tj9->resume[RES_CTRL_REG1] & RES_12BIT;
+ if (val)
+ return sprintf(buf, "%d\n", 12);
+ else
+ return sprintf(buf, "%d\n", 8);
+}
+
+static ssize_t kxtj9_res_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ if (val == 12)
+ tj9->resume[RES_CTRL_REG1] |= RES_12BIT;
+ else if (val == 8)
+ tj9->resume[RES_CTRL_REG1] &= (~RES_12BIT);
+ else
+ dev_err(&client->dev, "resolution must be 8 or 12 (bits)\n");
+ if (atomic_read(&tj9->enabled)) {
+ kxtj9_disable(tj9);
+ kxtj9_enable(tj9);
+ }
+ return count;
+}
+
+static ssize_t kxtj9_drdyenable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ if (val)
+ tj9->resume[RES_CTRL_REG1] |= DRDYE;
+ else
+ tj9->resume[RES_CTRL_REG1] &= (~DRDYE);
+ if (atomic_read(&tj9->enabled)) {
+ kxtj9_disable(tj9);
+ kxtj9_enable(tj9);
+ }
+ return count;
+}
+
+static ssize_t kxtj9_grange_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ u8 val = tj9->resume[RES_CTRL_REG1] & 0x18;
+ if (val == KXTJ9_G_2G)
+ return sprintf(buf, "%d\n", 2);
+ else if (val == KXTJ9_G_4G)
+ return sprintf(buf, "%d\n", 4);
+ else
+ return sprintf(buf, "%d\n", 8);
+}
+
+static ssize_t kxtj9_grange_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ u8 new_range = 0;
+ if (val == 8)
+ new_range = KXTJ9_G_8G;
+ else if (val == 4)
+ new_range = KXTJ9_G_4G;
+ else if (val == 2)
+ new_range = KXTJ9_G_2G;
+ else
+ dev_err(&client->dev, "g-range must be 2, 4, or 8; selecting 2\n");
+ kxtj9_update_g_range(tj9, new_range);
+ return count;
+}
+
+static DEVICE_ATTR(delay, S_IRUGO|S_IWUSR, kxtj9_delay_show, kxtj9_delay_store);
+static DEVICE_ATTR(enable, S_IRUGO|S_IWUSR, kxtj9_enable_show,
+ kxtj9_enable_store);
+static DEVICE_ATTR(res, S_IRUGO|S_IWUSR, kxtj9_res_show, kxtj9_res_store);
+static DEVICE_ATTR(drdyenable, S_IRUGO|S_IWUSR, NULL, kxtj9_drdyenable_store);
+static DEVICE_ATTR(grange, S_IRUGO|S_IWUSR, kxtj9_grange_show,
+ kxtj9_grange_store);
+
+static struct attribute *kxtj9_attributes[] = {
+ &dev_attr_delay.attr,
+ &dev_attr_enable.attr,
+ &dev_attr_res.attr,
+ &dev_attr_drdyenable.attr,
+ &dev_attr_grange.attr,
+ NULL
+};
+
+static struct attribute_group kxtj9_attribute_group = {
+ .attrs = kxtj9_attributes
+};
+/* /sysfs */
+
+static int __devinit kxtj9_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err = -1;
+ struct kxtj9_data *tj9 = kzalloc(sizeof(*tj9), GFP_KERNEL);
+ if (tj9 == NULL) {
+ dev_err(&client->dev,
+ "failed to allocate memory for module data\n");
+ err = -ENOMEM;
+ goto err0;
+ }
+ if (client->dev.platform_data == NULL) {
+ dev_err(&client->dev, "platform data is NULL; exiting\n");
+ err = -ENODEV;
+ goto err0;
+ }
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "client not i2c capable\n");
+ err = -ENODEV;
+ goto err0;
+ }
+ mutex_init(&tj9->lock);
+ mutex_lock(&tj9->lock);
+ tj9->client = client;
+ i2c_set_clientdata(client, tj9);
+
+ INIT_WORK(&tj9->irq_work, kxtj9_irq_work_func);
+ tj9->pdata = kmalloc(sizeof(*tj9->pdata), GFP_KERNEL);
+ if (tj9->pdata == NULL)
+ goto err1;
+
+ err = sysfs_create_group(&client->dev.kobj, &kxtj9_attribute_group);
+ if (err)
+ goto err1;
+
+ memcpy(tj9->pdata, client->dev.platform_data, sizeof(*tj9->pdata));
+ if (tj9->pdata->init) {
+ err = tj9->pdata->init();
+ if (err < 0)
+ goto err2;
+ }
+
+ tj9->irq = gpio_to_irq(tj9->pdata->gpio);
+
+ memset(tj9->resume, 0, ARRAY_SIZE(tj9->resume));
+ tj9->resume[RES_DATA_CTRL] = tj9->pdata->data_odr_init;
+ tj9->resume[RES_CTRL_REG1] = tj9->pdata->ctrl_reg1_init;
+ tj9->resume[RES_INT_CTRL1] = tj9->pdata->int_ctrl_init;
+ tj9->res_interval = tj9->pdata->poll_interval;
+
+ err = kxtj9_device_power_on(tj9);
+ if (err < 0)
+ goto err3;
+ atomic_set(&tj9->enabled, 1);
+
+ err = kxtj9_verify(tj9);
+ if (err < 0) {
+ dev_err(&client->dev, "unresolved i2c client\n");
+ goto err4;
+ }
+
+ err = kxtj9_update_g_range(tj9, tj9->pdata->g_range);
+ if (err < 0)
+ goto err4;
+
+ err = kxtj9_update_odr(tj9, tj9->res_interval);
+ if (err < 0)
+ goto err4;
+
+ err = kxtj9_input_init(tj9);
+ if (err < 0)
+ goto err4;
+
+ kxtj9_device_power_off(tj9);
+ atomic_set(&tj9->enabled, 0);
+
+ err = request_irq(tj9->irq, kxtj9_isr,
+ IRQF_TRIGGER_RISING | IRQF_DISABLED, "kxtj9-irq", tj9);
+ if (err < 0) {
+ pr_err("%s: request irq failed: %d\n", __func__, err);
+ goto err5;
+ }
+ disable_irq_nosync(tj9->irq);
+
+ mutex_unlock(&tj9->lock);
+
+ return 0;
+
+err5:
+ kxtj9_input_cleanup(tj9);
+err4:
+ kxtj9_device_power_off(tj9);
+err3:
+ if (tj9->pdata->exit)
+ tj9->pdata->exit();
+err2:
+ kfree(tj9->pdata);
+ sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group);
+err1:
+ mutex_unlock(&tj9->lock);
+ kfree(tj9);
+err0:
+ return err;
+}
+
+static int __devexit kxtj9_remove(struct i2c_client *client)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ free_irq(tj9->irq, tj9);
+ gpio_free(tj9->pdata->gpio);
+ kxtj9_input_cleanup(tj9);
+ kxtj9_device_power_off(tj9);
+ if (tj9->pdata->exit)
+ tj9->pdata->exit();
+ kfree(tj9->pdata);
+ sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group);
+ kfree(tj9);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int kxtj9_resume(struct i2c_client *client)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ return kxtj9_enable(tj9);
+}
+
+static int kxtj9_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ return kxtj9_disable(tj9);
+}
+#endif
+
+static const struct i2c_device_id kxtj9_id[] = {
+ {NAME, 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, kxtj9_id);
+
+static struct i2c_driver kxtj9_driver = {
+ .driver = {
+ .name = NAME,
+ },
+ .probe = kxtj9_probe,
+ .remove = __devexit_p(kxtj9_remove),
+ .resume = kxtj9_resume,
+ .suspend = kxtj9_suspend,
+ .id_table = kxtj9_id,
+};
+
+static int __init kxtj9_init(void)
+{
+ return i2c_add_driver(&kxtj9_driver);
+}
+
+static void __exit kxtj9_exit(void)
+{
+ i2c_del_driver(&kxtj9_driver);
+}
+
+module_init(kxtj9_init);
+module_exit(kxtj9_exit);
+
+MODULE_DESCRIPTION("KXTJ9 accelerometer driver");
+MODULE_AUTHOR("Chris Hudson <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/kxtj9.h b/include/linux/kxtj9.h
new file mode 100644
index 0000000..67a08da
--- /dev/null
+++ b/include/linux/kxtj9.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR 0x0F
+/* CONTROL REGISTER 1 BITS */
+#define RES_12BIT 0x40
+#define KXTJ9_G_2G 0x00
+#define KXTJ9_G_4G 0x08
+#define KXTJ9_G_8G 0x10
+#define SHIFT_ADJ_2G 4
+#define SHIFT_ADJ_4G 3
+#define SHIFT_ADJ_8G 2
+#define DRDYE 0x20 /* data ready function enable bit */
+/* INTERRUPT CONTROL REGISTER 1 BITS */
+#define KXTJ9_IEN 0x20 /* interrupt enable */
+#define KXTJ9_IEA 0x10 /* interrupt polarity */
+#define KXTJ9_IEL 0x08 /* interrupt response */
+/* DATA CONTROL REGISTER BITS */
+#define ODR800F 0x06 /* lpf output ODR masks */
+#define ODR400F 0x05
+#define ODR200F 0x04
+#define ODR100F 0x03
+#define ODR50F 0x02
+#define ODR25F 0x01
+#define ODR12_5F 0x00
+
+#ifdef __KERNEL__
+struct kxtj9_platform_data {
+ int poll_interval;
+ int min_interval;
+
+ u8 g_range;
+ u8 shift_adj;
+
+ u8 axis_map_x;
+ u8 axis_map_y;
+ u8 axis_map_z;
+
+ u8 negate_x;
+ u8 negate_y;
+ u8 negate_z;
+
+ u8 data_odr_init;
+ u8 ctrl_reg1_init;
+ u8 int_ctrl_init;
+
+ int (*init)(void);
+ void (*exit)(void);
+ int (*power_on)(void);
+ int (*power_off)(void);
+
+ int gpio;
+};
+#endif /* __KERNEL__ */
+
+#endif /* __KXTJ9_H__ */
+
--
1.5.4.3
My apologies; it looks like the message was left out somehow.
This patch adds support for the Kionix KXTJ9 3-axis digital accelerometer. The driver uses input for exposing acceleration data, sysfs for handling system commands, and i2c for communication with the hardware.
Patch derived from 2.6.39-rc7
-----Original Message-----
From: Chris Hudson
Sent: Friday, May 13, 2011 2:13 PM
To: [email protected]
Cc: [email protected]; [email protected]; Chris Hudson
Subject: [PATCH 1/1] input: Add support for Kionix KXTJ9 accelerometer
From: Chris Hudson <[email protected]>
Signed-off-by: Chris Hudson <[email protected]>
---
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/kxtj9.c | 824 +++++++++++++++++++++++++++++++++++++++++++
include/linux/kxtj9.h | 76 ++++
4 files changed, 911 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/kxtj9.c
create mode 100644 include/linux/kxtj9.h
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f9cf088..567f3d2 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -467,4 +467,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
To compile this driver as a module, choose M here: the
module will be called xen-kbdfront.
+config INPUT_KXTJ9
+ tristate "Kionix KXTJ9 tri-axis digital accelerometer"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Kionix KXTJ9 digital
+ tri-axis accelerometer.
+
+ This driver can also be built as a module. If so, the module
+ will be called kxtj9.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index e3f7984..f2477ef 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
new file mode 100644
index 0000000..42a39c7
--- /dev/null
+++ b/drivers/input/misc/kxtj9.c
@@ -0,0 +1,824 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/uaccess.h>
+#include <linux/workqueue.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/kthread.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/kxtj9.h>
+
+#define NAME "kxtj9"
+#define G_MAX 8000
+/* OUTPUT REGISTERS */
+#define XOUT_L 0x06
+#define WHO_AM_I 0x0F
+/* CONTROL REGISTERS */
+#define INT_REL 0x1A
+#define CTRL_REG1 0x1B
+#define INT_CTRL1 0x1E
+#define DATA_CTRL 0x21
+/* CONTROL REGISTER 1 BITS */
+#define PC1_OFF 0x7F
+#define PC1_ON 0x80
+/* INPUT_ABS CONSTANTS */
+#define FUZZ 3
+#define FLAT 3
+/* RESUME STATE INDICES */
+#define RES_DATA_CTRL 0
+#define RES_CTRL_REG1 1
+#define RES_INT_CTRL1 2
+#define RESUME_ENTRIES 3
+
+/*
+ * The following table lists the maximum appropriate poll interval for each
+ * available output data rate.
+ */
+struct {
+ unsigned int cutoff;
+ u8 mask;
+} kxtj9_odr_table[] = {
+ {
+ 3, ODR800F}, {
+ 5, ODR400F}, {
+ 10, ODR200F}, {
+ 20, ODR100F}, {
+ 40, ODR50F}, {
+ 80, ODR25F}, {
+ 0, ODR12_5F},
+};
+
+struct kxtj9_data {
+ struct i2c_client *client;
+ struct kxtj9_platform_data *pdata;
+ struct mutex lock;
+ struct delayed_work input_work;
+ struct input_dev *input_dev;
+ struct work_struct irq_work;
+
+ int hw_initialized;
+ atomic_t enabled;
+ u8 resume[RESUME_ENTRIES];
+ int res_interval;
+ int drdy_enabled;
+ int irq;
+};
+
+static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
+{
+ int err;
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags,
+ .len = 1,
+ .buf = &addr,
+ },
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags | I2C_M_RD,
+ .len = len,
+ .buf = data,
+ },
+ };
+ err = i2c_transfer(tj9->client->adapter, msgs, 2);
+
+ if (err != 2)
+ dev_err(&tj9->client->dev, "read transfer error\n");
+ else
+ err = 0;
+
+ return err;
+}
+
+static int kxtj9_i2c_write(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
+{
+ int err;
+ int i;
+ u8 buf[len + 1];
+
+ struct i2c_msg msgs[] = {
+ {
+ .addr = tj9->client->addr,
+ .flags = tj9->client->flags,
+ .len = len + 1,
+ .buf = buf,
+ },
+ };
+
+ buf[0] = addr;
+ for (i = 0; i < len; i++)
+ buf[i + 1] = data[i];
+
+ err = i2c_transfer(tj9->client->adapter, msgs, 1);
+
+ if (err != 1)
+ dev_err(&tj9->client->dev, "write transfer error\n");
+ else
+ err = 0;
+
+ return err;
+}
+
+static int kxtj9_verify(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf;
+
+ err = kxtj9_i2c_read(tj9, WHO_AM_I, &buf, 1);
+ if (err < 0)
+ dev_err(&tj9->client->dev, "read err int source\n");
+ if (buf != 0x06)
+ err = -1;
+
+ return err;
+}
+
+int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range)
+{
+ int err;
+ u8 shift;
+ u8 buf;
+ u8 out;
+
+ switch (new_g_range) {
+ case KXTJ9_G_2G:
+ shift = SHIFT_ADJ_2G;
+ break;
+ case KXTJ9_G_4G:
+ shift = SHIFT_ADJ_4G;
+ break;
+ case KXTJ9_G_8G:
+ shift = SHIFT_ADJ_8G;
+ break;
+ default:
+ dev_err(&tj9->client->dev, "invalid g range request\n");
+ return -EINVAL;
+ }
+
+ out = (tj9->resume[RES_CTRL_REG1] & 0xE7) | new_g_range;
+ if (shift != tj9->pdata->shift_adj) {
+ if (atomic_read(&tj9->enabled)) {
+ buf = 0;
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &out, 1);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ tj9->resume[RES_CTRL_REG1] = out;
+ tj9->pdata->shift_adj = shift;
+
+ return 0;
+}
+
+int kxtj9_update_odr(struct kxtj9_data *tj9, int poll_interval)
+{
+ int err = -1;
+ int i;
+ u8 config;
+ u8 temp = 0;
+
+ /* Use the lowest ODR that can support the requested poll interval */
+ for (i = 0; i < ARRAY_SIZE(kxtj9_odr_table); i++) {
+ config = kxtj9_odr_table[i].mask;
+ if (poll_interval < kxtj9_odr_table[i].cutoff)
+ break;
+ }
+
+ if (atomic_read(&tj9->enabled)) {
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &temp, 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, DATA_CTRL, &config, 1);
+ if (err < 0)
+ return err;
+ temp = tj9->resume[RES_CTRL_REG1];
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &temp, 1);
+ if (err < 0)
+ return err;
+ /* Valid input_dev indicates that input_init passed and this
+ * workqueue is available */
+ if (tj9->input_dev) {
+ cancel_delayed_work_sync(&tj9->input_work);
+ schedule_delayed_work(&tj9->input_work,
+ msecs_to_jiffies(poll_interval));
+ }
+ }
+ tj9->resume[RES_DATA_CTRL] = config;
+
+ return 0;
+}
+
+static int kxtj9_hw_init(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf = 0;
+
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, DATA_CTRL, &tj9->resume[RES_DATA_CTRL], 1);
+ if (err < 0)
+ return err;
+ err = kxtj9_i2c_write(tj9, INT_CTRL1, &tj9->resume[RES_INT_CTRL1], 1);
+ if (err < 0)
+ return err;
+
+ err = kxtj9_update_g_range(tj9, tj9->pdata->g_range);
+ if (err < 0)
+ return err;
+
+ buf = (tj9->resume[RES_CTRL_REG1] | PC1_ON);
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ return err;
+ tj9->resume[RES_CTRL_REG1] = buf;
+
+ if ((buf & DRDYE) > 0)
+ tj9->drdy_enabled = 1;
+ else
+ tj9->drdy_enabled = 0;
+
+ err = kxtj9_update_odr(tj9, tj9->res_interval);
+ if (err < 0)
+ return err;
+
+ tj9->hw_initialized = 1;
+
+ return 0;
+}
+
+static void kxtj9_device_power_off(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf;
+
+ buf = tj9->resume[RES_CTRL_REG1] & PC1_OFF;
+ err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
+ if (err < 0)
+ dev_err(&tj9->client->dev, "soft power off failed\n");
+ disable_irq(tj9->irq);
+ if (tj9->pdata->power_off)
+ tj9->pdata->power_off();
+ tj9->resume[RES_CTRL_REG1] = buf;
+ tj9->hw_initialized = 0;
+}
+
+static int kxtj9_device_power_on(struct kxtj9_data *tj9)
+{
+ int err;
+
+ if (tj9->pdata->power_on) {
+ err = tj9->pdata->power_on();
+ if (err < 0)
+ return err;
+ }
+ enable_irq(tj9->irq);
+ if (!tj9->hw_initialized) {
+ mdelay(40);
+ err = kxtj9_hw_init(tj9);
+ if (err < 0) {
+ kxtj9_device_power_off(tj9);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static irqreturn_t kxtj9_isr(int irq, void *dev)
+{
+ struct kxtj9_data *tj9 = dev;
+
+ disable_irq_nosync(irq);
+ schedule_work(&tj9->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static int kxtj9_get_acceleration_data(struct kxtj9_data *tj9, int *xyz)
+{
+ int err;
+ /* Data bytes from hardware xL, xH, yL, yH, zL, zH */
+ u8 acc_data[6];
+ /* x,y,z hardware values */
+ int hw_d[3];
+
+ err = kxtj9_i2c_read(tj9, XOUT_L, acc_data, 6);
+ if (err < 0)
+ return err;
+
+
+ hw_d[0] = (int) (((acc_data[1]) << 8) | acc_data[0]);
+ hw_d[1] = (int) (((acc_data[3]) << 8) | acc_data[2]);
+ hw_d[2] = (int) (((acc_data[5]) << 8) | acc_data[4]);
+
+ if (hw_d[0] & 0x8000)
+ hw_d[0] |= 0xFFFF0000;
+ if (hw_d[1] & 0x8000)
+ hw_d[1] |= 0xFFFF0000;
+ if (hw_d[2] & 0x8000)
+ hw_d[2] |= 0xFFFF0000;
+
+ hw_d[0] >>= tj9->pdata->shift_adj;
+ hw_d[1] >>= tj9->pdata->shift_adj;
+ hw_d[2] >>= tj9->pdata->shift_adj;
+
+ xyz[0] = ((tj9->pdata->negate_x) ? (-hw_d[tj9->pdata->axis_map_x])
+ : (hw_d[tj9->pdata->axis_map_x]));
+ xyz[1] = ((tj9->pdata->negate_y) ? (-hw_d[tj9->pdata->axis_map_y])
+ : (hw_d[tj9->pdata->axis_map_y]));
+ xyz[2] = ((tj9->pdata->negate_z) ? (-hw_d[tj9->pdata->axis_map_z])
+ : (hw_d[tj9->pdata->axis_map_z]));
+
+ return err;
+}
+
+static void kxtj9_report_values(struct kxtj9_data *tj9, int *xyz)
+{
+ input_report_abs(tj9->input_dev, ABS_X, xyz[0]);
+ input_report_abs(tj9->input_dev, ABS_Y, xyz[1]);
+ input_report_abs(tj9->input_dev, ABS_Z, xyz[2]);
+}
+
+static void kxtj9_irq_work_func(struct work_struct *work)
+{
+ int err;
+ u8 buf;
+ int xyz[3];
+
+ struct kxtj9_data *tj9
+ = container_of(work, struct kxtj9_data, irq_work);
+
+ /* data ready is the only possible interrupt type */
+ if (kxtj9_get_acceleration_data(tj9, xyz) == 0)
+ kxtj9_report_values(tj9, xyz);
+
+ err = kxtj9_i2c_read(tj9, INT_REL, &buf, 1);
+ if (err < 0)
+ dev_err(&tj9->client->dev,
+ "error clearing interrupt status: %d\n", err);
+
+ enable_irq(tj9->irq);
+}
+
+static int kxtj9_enable(struct kxtj9_data *tj9)
+{
+ int err;
+ u8 buf;
+
+ if (!atomic_cmpxchg(&tj9->enabled, 0, 1)) {
+ err = kxtj9_device_power_on(tj9);
+ err = kxtj9_i2c_read(tj9, INT_REL, &buf, 1);
+ if (err < 0) {
+ dev_err(&tj9->client->dev,
+ "error clearing interrupt: %d\n", err);
+ atomic_set(&tj9->enabled, 0);
+ return err;
+ }
+ schedule_delayed_work(&tj9->input_work,
+ msecs_to_jiffies(tj9->res_interval));
+ }
+
+ return 0;
+}
+
+static int kxtj9_disable(struct kxtj9_data *tj9)
+{
+ if (atomic_cmpxchg(&tj9->enabled, 1, 0)) {
+ cancel_delayed_work_sync(&tj9->input_work);
+ kxtj9_device_power_off(tj9);
+ }
+
+ return 0;
+}
+
+static void kxtj9_input_work_func(struct work_struct *work)
+{
+ struct kxtj9_data *tj9 = container_of((struct delayed_work *)work,
+ struct kxtj9_data, input_work);
+ int xyz[3] = { 0 };
+
+ if (tj9->drdy_enabled == 0) {
+ mutex_lock(&tj9->lock);
+
+ if (kxtj9_get_acceleration_data(tj9, xyz) == 0)
+ kxtj9_report_values(tj9, xyz);
+
+ schedule_delayed_work(&tj9->input_work,
+ msecs_to_jiffies(tj9->res_interval));
+ mutex_unlock(&tj9->lock);
+ }
+}
+
+int kxtj9_input_open(struct input_dev *input)
+{
+ struct kxtj9_data *tj9 = input_get_drvdata(input);
+
+ return kxtj9_enable(tj9);
+}
+
+void kxtj9_input_close(struct input_dev *dev)
+{
+ struct kxtj9_data *tj9 = input_get_drvdata(dev);
+
+ kxtj9_disable(tj9);
+}
+
+static int kxtj9_input_init(struct kxtj9_data *tj9)
+{
+ int err;
+
+ INIT_DELAYED_WORK(&tj9->input_work, kxtj9_input_work_func);
+ tj9->input_dev = input_allocate_device();
+ if (!tj9->input_dev) {
+ err = -ENOMEM;
+ dev_err(&tj9->client->dev, "input device allocate failed\n");
+ goto err0;
+ }
+ tj9->input_dev->open = kxtj9_input_open;
+ tj9->input_dev->close = kxtj9_input_close;
+
+ input_set_drvdata(tj9->input_dev, tj9);
+
+ set_bit(EV_ABS, tj9->input_dev->evbit);
+ set_bit(EV_REL, tj9->input_dev->evbit);
+
+ input_set_abs_params(tj9->input_dev, ABS_X, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(tj9->input_dev, ABS_Y, -G_MAX, G_MAX, FUZZ, FLAT);
+ input_set_abs_params(tj9->input_dev, ABS_Z, -G_MAX, G_MAX, FUZZ, FLAT);
+
+ tj9->input_dev->name = "kxtj9_accel";
+
+ err = input_register_device(tj9->input_dev);
+ if (err) {
+ dev_err(&tj9->client->dev,
+ "unable to register input polled device %s: %d\n",
+ tj9->input_dev->name, err);
+ goto err1;
+ }
+
+ return 0;
+err1:
+ input_free_device(tj9->input_dev);
+err0:
+ return err;
+}
+
+static void kxtj9_input_cleanup(struct kxtj9_data *tj9)
+{
+ input_unregister_device(tj9->input_dev);
+}
+
+/* sysfs */
+static ssize_t kxtj9_delay_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ return sprintf(buf, "%d\n", tj9->res_interval);
+}
+
+static ssize_t kxtj9_delay_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+
+ tj9->res_interval = max(val, tj9->pdata->min_interval);
+ kxtj9_update_odr(tj9, tj9->res_interval);
+
+ return count;
+}
+
+static ssize_t kxtj9_enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ return sprintf(buf, "%d\n", atomic_read(&tj9->enabled));
+}
+
+static ssize_t kxtj9_enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ if (val)
+ kxtj9_enable(tj9);
+ else
+ kxtj9_disable(tj9);
+ return count;
+}
+
+static ssize_t kxtj9_res_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ u8 val = tj9->resume[RES_CTRL_REG1] & RES_12BIT;
+ if (val)
+ return sprintf(buf, "%d\n", 12);
+ else
+ return sprintf(buf, "%d\n", 8);
+}
+
+static ssize_t kxtj9_res_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ if (val == 12)
+ tj9->resume[RES_CTRL_REG1] |= RES_12BIT;
+ else if (val == 8)
+ tj9->resume[RES_CTRL_REG1] &= (~RES_12BIT);
+ else
+ dev_err(&client->dev, "resolution must be 8 or 12 (bits)\n");
+ if (atomic_read(&tj9->enabled)) {
+ kxtj9_disable(tj9);
+ kxtj9_enable(tj9);
+ }
+ return count;
+}
+
+static ssize_t kxtj9_drdyenable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ if (val)
+ tj9->resume[RES_CTRL_REG1] |= DRDYE;
+ else
+ tj9->resume[RES_CTRL_REG1] &= (~DRDYE);
+ if (atomic_read(&tj9->enabled)) {
+ kxtj9_disable(tj9);
+ kxtj9_enable(tj9);
+ }
+ return count;
+}
+
+static ssize_t kxtj9_grange_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ u8 val = tj9->resume[RES_CTRL_REG1] & 0x18;
+ if (val == KXTJ9_G_2G)
+ return sprintf(buf, "%d\n", 2);
+ else if (val == KXTJ9_G_4G)
+ return sprintf(buf, "%d\n", 4);
+ else
+ return sprintf(buf, "%d\n", 8);
+}
+
+static ssize_t kxtj9_grange_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+ int val = simple_strtoul(buf, NULL, 10);
+ u8 new_range = 0;
+ if (val == 8)
+ new_range = KXTJ9_G_8G;
+ else if (val == 4)
+ new_range = KXTJ9_G_4G;
+ else if (val == 2)
+ new_range = KXTJ9_G_2G;
+ else
+ dev_err(&client->dev, "g-range must be 2, 4, or 8; selecting 2\n");
+ kxtj9_update_g_range(tj9, new_range);
+ return count;
+}
+
+static DEVICE_ATTR(delay, S_IRUGO|S_IWUSR, kxtj9_delay_show, kxtj9_delay_store);
+static DEVICE_ATTR(enable, S_IRUGO|S_IWUSR, kxtj9_enable_show,
+ kxtj9_enable_store);
+static DEVICE_ATTR(res, S_IRUGO|S_IWUSR, kxtj9_res_show, kxtj9_res_store);
+static DEVICE_ATTR(drdyenable, S_IRUGO|S_IWUSR, NULL, kxtj9_drdyenable_store);
+static DEVICE_ATTR(grange, S_IRUGO|S_IWUSR, kxtj9_grange_show,
+ kxtj9_grange_store);
+
+static struct attribute *kxtj9_attributes[] = {
+ &dev_attr_delay.attr,
+ &dev_attr_enable.attr,
+ &dev_attr_res.attr,
+ &dev_attr_drdyenable.attr,
+ &dev_attr_grange.attr,
+ NULL
+};
+
+static struct attribute_group kxtj9_attribute_group = {
+ .attrs = kxtj9_attributes
+};
+/* /sysfs */
+
+static int __devinit kxtj9_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err = -1;
+ struct kxtj9_data *tj9 = kzalloc(sizeof(*tj9), GFP_KERNEL);
+ if (tj9 == NULL) {
+ dev_err(&client->dev,
+ "failed to allocate memory for module data\n");
+ err = -ENOMEM;
+ goto err0;
+ }
+ if (client->dev.platform_data == NULL) {
+ dev_err(&client->dev, "platform data is NULL; exiting\n");
+ err = -ENODEV;
+ goto err0;
+ }
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "client not i2c capable\n");
+ err = -ENODEV;
+ goto err0;
+ }
+ mutex_init(&tj9->lock);
+ mutex_lock(&tj9->lock);
+ tj9->client = client;
+ i2c_set_clientdata(client, tj9);
+
+ INIT_WORK(&tj9->irq_work, kxtj9_irq_work_func);
+ tj9->pdata = kmalloc(sizeof(*tj9->pdata), GFP_KERNEL);
+ if (tj9->pdata == NULL)
+ goto err1;
+
+ err = sysfs_create_group(&client->dev.kobj, &kxtj9_attribute_group);
+ if (err)
+ goto err1;
+
+ memcpy(tj9->pdata, client->dev.platform_data, sizeof(*tj9->pdata));
+ if (tj9->pdata->init) {
+ err = tj9->pdata->init();
+ if (err < 0)
+ goto err2;
+ }
+
+ tj9->irq = gpio_to_irq(tj9->pdata->gpio);
+
+ memset(tj9->resume, 0, ARRAY_SIZE(tj9->resume));
+ tj9->resume[RES_DATA_CTRL] = tj9->pdata->data_odr_init;
+ tj9->resume[RES_CTRL_REG1] = tj9->pdata->ctrl_reg1_init;
+ tj9->resume[RES_INT_CTRL1] = tj9->pdata->int_ctrl_init;
+ tj9->res_interval = tj9->pdata->poll_interval;
+
+ err = kxtj9_device_power_on(tj9);
+ if (err < 0)
+ goto err3;
+ atomic_set(&tj9->enabled, 1);
+
+ err = kxtj9_verify(tj9);
+ if (err < 0) {
+ dev_err(&client->dev, "unresolved i2c client\n");
+ goto err4;
+ }
+
+ err = kxtj9_update_g_range(tj9, tj9->pdata->g_range);
+ if (err < 0)
+ goto err4;
+
+ err = kxtj9_update_odr(tj9, tj9->res_interval);
+ if (err < 0)
+ goto err4;
+
+ err = kxtj9_input_init(tj9);
+ if (err < 0)
+ goto err4;
+
+ kxtj9_device_power_off(tj9);
+ atomic_set(&tj9->enabled, 0);
+
+ err = request_irq(tj9->irq, kxtj9_isr,
+ IRQF_TRIGGER_RISING | IRQF_DISABLED, "kxtj9-irq", tj9);
+ if (err < 0) {
+ pr_err("%s: request irq failed: %d\n", __func__, err);
+ goto err5;
+ }
+ disable_irq_nosync(tj9->irq);
+
+ mutex_unlock(&tj9->lock);
+
+ return 0;
+
+err5:
+ kxtj9_input_cleanup(tj9);
+err4:
+ kxtj9_device_power_off(tj9);
+err3:
+ if (tj9->pdata->exit)
+ tj9->pdata->exit();
+err2:
+ kfree(tj9->pdata);
+ sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group);
+err1:
+ mutex_unlock(&tj9->lock);
+ kfree(tj9);
+err0:
+ return err;
+}
+
+static int __devexit kxtj9_remove(struct i2c_client *client)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ free_irq(tj9->irq, tj9);
+ gpio_free(tj9->pdata->gpio);
+ kxtj9_input_cleanup(tj9);
+ kxtj9_device_power_off(tj9);
+ if (tj9->pdata->exit)
+ tj9->pdata->exit();
+ kfree(tj9->pdata);
+ sysfs_remove_group(&client->dev.kobj, &kxtj9_attribute_group);
+ kfree(tj9);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int kxtj9_resume(struct i2c_client *client)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ return kxtj9_enable(tj9);
+}
+
+static int kxtj9_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct kxtj9_data *tj9 = i2c_get_clientdata(client);
+
+ return kxtj9_disable(tj9);
+}
+#endif
+
+static const struct i2c_device_id kxtj9_id[] = {
+ {NAME, 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, kxtj9_id);
+
+static struct i2c_driver kxtj9_driver = {
+ .driver = {
+ .name = NAME,
+ },
+ .probe = kxtj9_probe,
+ .remove = __devexit_p(kxtj9_remove),
+ .resume = kxtj9_resume,
+ .suspend = kxtj9_suspend,
+ .id_table = kxtj9_id,
+};
+
+static int __init kxtj9_init(void)
+{
+ return i2c_add_driver(&kxtj9_driver);
+}
+
+static void __exit kxtj9_exit(void)
+{
+ i2c_del_driver(&kxtj9_driver);
+}
+
+module_init(kxtj9_init);
+module_exit(kxtj9_exit);
+
+MODULE_DESCRIPTION("KXTJ9 accelerometer driver");
+MODULE_AUTHOR("Chris Hudson <[email protected]>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/kxtj9.h b/include/linux/kxtj9.h
new file mode 100644
index 0000000..67a08da
--- /dev/null
+++ b/include/linux/kxtj9.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2011 Kionix, Inc.
+ * Written by Chris Hudson <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#ifndef __KXTJ9_H__
+#define __KXTJ9_H__
+
+#define KXTJ9_I2C_ADDR 0x0F
+/* CONTROL REGISTER 1 BITS */
+#define RES_12BIT 0x40
+#define KXTJ9_G_2G 0x00
+#define KXTJ9_G_4G 0x08
+#define KXTJ9_G_8G 0x10
+#define SHIFT_ADJ_2G 4
+#define SHIFT_ADJ_4G 3
+#define SHIFT_ADJ_8G 2
+#define DRDYE 0x20 /* data ready function enable bit */
+/* INTERRUPT CONTROL REGISTER 1 BITS */
+#define KXTJ9_IEN 0x20 /* interrupt enable */
+#define KXTJ9_IEA 0x10 /* interrupt polarity */
+#define KXTJ9_IEL 0x08 /* interrupt response */
+/* DATA CONTROL REGISTER BITS */
+#define ODR800F 0x06 /* lpf output ODR masks */
+#define ODR400F 0x05
+#define ODR200F 0x04
+#define ODR100F 0x03
+#define ODR50F 0x02
+#define ODR25F 0x01
+#define ODR12_5F 0x00
+
+#ifdef __KERNEL__
+struct kxtj9_platform_data {
+ int poll_interval;
+ int min_interval;
+
+ u8 g_range;
+ u8 shift_adj;
+
+ u8 axis_map_x;
+ u8 axis_map_y;
+ u8 axis_map_z;
+
+ u8 negate_x;
+ u8 negate_y;
+ u8 negate_z;
+
+ u8 data_odr_init;
+ u8 ctrl_reg1_init;
+ u8 int_ctrl_init;
+
+ int (*init)(void);
+ void (*exit)(void);
+ int (*power_on)(void);
+ int (*power_off)(void);
+
+ int gpio;
+};
+#endif /* __KERNEL__ */
+
+#endif /* __KXTJ9_H__ */
+
--
1.5.4.3
> + * The following table lists the maximum appropriate poll interval for each
> + * available output data rate.
Surely this can be static const
> + */
> +struct {
> + unsigned int cutoff;
> + u8 mask;
> +} kxtj9_odr_table[] = {
> + {
> +static int kxtj9_i2c_read(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
> +{
> + int err;
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = tj9->client->addr,
> + .flags = tj9->client->flags,
> + .len = 1,
> + .buf = &addr,
> + },
> + {
> + .addr = tj9->client->addr,
> + .flags = tj9->client->flags | I2C_M_RD,
> + .len = len,
> + .buf = data,
> + },
> + };
> + err = i2c_transfer(tj9->client->adapter, msgs, 2);
> +
> + if (err != 2)
> + dev_err(&tj9->client->dev, "read transfer error\n");
Just return ret and check it with < 0 meaning error
> +static int kxtj9_i2c_write(struct kxtj9_data *tj9, u8 addr, u8 *data, int len)
> +{
> + int err;
> + int i;
> + u8 buf[len + 1];
> +
> + struct i2c_msg msgs[] = {
> + {
> + .addr = tj9->client->addr,
> + .flags = tj9->client->flags,
> + .len = len + 1,
> + .buf = buf,
> + },
> + };
> +
> + buf[0] = addr;
> + for (i = 0; i < len; i++)
> + buf[i + 1] = data[i];
memcpy is quite useful and the kernel one inlines nicely
> +int kxtj9_update_g_range(struct kxtj9_data *tj9, u8 new_g_range)
> +{
> + int err;
> + u8 shift;
> + u8 buf;
> + u8 out;
> +
> + switch (new_g_range) {
> + case KXTJ9_G_2G:
> + shift = SHIFT_ADJ_2G;
> + break;
> + case KXTJ9_G_4G:
> + shift = SHIFT_ADJ_4G;
> + break;
> + case KXTJ9_G_8G:
> + shift = SHIFT_ADJ_8G;
> + break;
> + default:
> + dev_err(&tj9->client->dev, "invalid g range request\n");
> + return -EINVAL;
So a user can fill the system log ? not good
> + }
> +
> + out = (tj9->resume[RES_CTRL_REG1] & 0xE7) | new_g_range;
> + if (shift != tj9->pdata->shift_adj) {
> + if (atomic_read(&tj9->enabled)) {
> + buf = 0;
> + err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
> + if (err < 0)
> + return err;
> + err = kxtj9_i2c_write(tj9, CTRL_REG1, &out, 1);
> + if (err < 0)
> + return err;
> + }
You seem to have no locking on parallel actions and a rather meaningles
atomic
> + }
> +
> + tj9->resume[RES_CTRL_REG1] = out;
> + tj9->pdata->shift_adj = shift;
and unlocked too
In fact the locking seems to be utterly busted everywhere in the driver.
> +static void kxtj9_device_power_off(struct kxtj9_data *tj9)
> +{
> + int err;
> + u8 buf;
> +
> + buf = tj9->resume[RES_CTRL_REG1] & PC1_OFF;
> + err = kxtj9_i2c_write(tj9, CTRL_REG1, &buf, 1);
> + if (err < 0)
> + dev_err(&tj9->client->dev, "soft power off failed\n");
> + disable_irq(tj9->irq);
What if the IRQ is shared ?
> +static irqreturn_t kxtj9_isr(int irq, void *dev)
> +{
> + struct kxtj9_data *tj9 = dev;
> +
> + disable_irq_nosync(irq);
> + schedule_work(&tj9->irq_work);
> +
> + return IRQ_HANDLED;
> +}
Threaded irq will sort this lot out for you
> +static ssize_t kxtj9_enable_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct kxtj9_data *tj9 = i2c_get_clientdata(client);
> + int val = simple_strtoul(buf, NULL, 10);
> + if (val)
> + kxtj9_enable(tj9);
> + else
> + kxtj9_disable(tj9);
You seem to have no locking on this either
> + return count;
> +}
> +static DEVICE_ATTR(delay, S_IRUGO|S_IWUSR, kxtj9_delay_show, kxtj9_delay_store);
> +static DEVICE_ATTR(enable, S_IRUGO|S_IWUSR, kxtj9_enable_show,
> + kxtj9_enable_store);
> +static DEVICE_ATTR(res, S_IRUGO|S_IWUSR, kxtj9_res_show, kxtj9_res_store);
> +static DEVICE_ATTR(drdyenable, S_IRUGO|S_IWUSR, NULL, kxtj9_drdyenable_store);
> +static DEVICE_ATTR(grange, S_IRUGO|S_IWUSR, kxtj9_grange_show,
> + kxtj9_grange_store);
These should probably come from platform data
> +static int __devinit kxtj9_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int err = -1;
> + struct kxtj9_data *tj9 = kzalloc(sizeof(*tj9), GFP_KERNEL);
> + if (tj9 == NULL) {
> + dev_err(&client->dev,
> + "failed to allocate memory for module data\n");
> + err = -ENOMEM;
> + goto err0;
> + }
> + if (client->dev.platform_data == NULL) {
> + dev_err(&client->dev, "platform data is NULL; exiting\n");
> + err = -ENODEV;
> + goto err0;
Leaks memory
> + }
> + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> + dev_err(&client->dev, "client not i2c capable\n");
> + err = -ENODEV;
Ditto
> + memcpy(tj9->pdata, client->dev.platform_data, sizeof(*tj9->pdata));
> + if (tj9->pdata->init) {
> + err = tj9->pdata->init();
> + if (err < 0)
> + goto err2;
> + }
> +
> + tj9->irq = gpio_to_irq(tj9->pdata->gpio);
What if it's not on a gpio. Probably better any gpio and irq conversion is
done by the platform callback/init code
And the sysfs nodes need documentation.
Overall it looks like a lot of input drivers that get posted here
- Nobody has considered locking between actions and sysfs (or multiple
sysfs actions in parallel)
- Enable/disable is implemented in blissful ignorance of what happens if
a disable occurs during a sysfs or other action
Most of the rest looks like it just needs a good polish.
I'll leave taking a proper look until you have cleared up the issues Alan pointed out.
But as I was taking a quick look...
Firstly I concur entirely with Alan in that most of the sysfs stuff should be
platform data for an input driver.
...
>
>> + memcpy(tj9->pdata, client->dev.platform_data, sizeof(*tj9->pdata));
>> + if (tj9->pdata->init) {
>> + err = tj9->pdata->init();
>> + if (err < 0)
>> + goto err2;
>> + }
>> +
>> + tj9->irq = gpio_to_irq(tj9->pdata->gpio);
>
> What if it's not on a gpio. Probably better any gpio and irq conversion is
> done by the platform callback/init code
Perfectly good irq element in i2c_board_info structure. This is exactly what
it is normally used for.
>
>
> And the sysfs nodes need documentation.
Would be nice to have some docs on that platform data struct as well.
Most of it is fairly obvious, but data_odr_init etc aren't!
>
>
> Overall it looks like a lot of input drivers that get posted here
>
> - Nobody has considered locking between actions and sysfs (or multiple
> sysfs actions in parallel)
> - Enable/disable is implemented in blissful ignorance of what happens if
> a disable occurs during a sysfs or other action
>
> Most of the rest looks like it just needs a good polish.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>