2011-05-30 08:17:31

by Jinyoung Park

[permalink] [raw]
Subject: [PATCH 0/1] Submitting aat2870 driver

Hi, Samuel

I would like to contribute my driver to Linux Kernel.
The driver is for AnalogicTech AAT2870 and include backlight, regulator
and mfd driver.
It was written by me and verified on NVIDIA Tegra platform.
And following patches are based on for-next branch in your repository.
(git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git)
Please review my driver.

Thanks,
Jin Park.

Jin Park (1):
aat2870: Adding backlight, regulator and mfd driver

drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1 +
drivers/mfd/aat2870-core.c | 532 +++++++++++++++++++++++++++++++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/aat2870-regulator.c | 265 ++++++++++++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/aat2870_bl.c | 246 +++++++++++++++
include/linux/mfd/aat2870.h | 182 +++++++++++
10 files changed, 1249 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/aat2870-core.c
create mode 100644 drivers/regulator/aat2870-regulator.c
create mode 100644 drivers/video/backlight/aat2870_bl.c
create mode 100644 include/linux/mfd/aat2870.h


2011-05-30 08:17:42

by Jinyoung Park

[permalink] [raw]
Subject: [PATCH 1/1] aat2870: Adding backlight, regulator and mfd driver

Adding backlight, regulator and mfd driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <[email protected]>
---
drivers/mfd/Kconfig | 7 +
drivers/mfd/Makefile | 1 +
drivers/mfd/aat2870-core.c | 532 +++++++++++++++++++++++++++++++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/aat2870-regulator.c | 265 ++++++++++++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/aat2870_bl.c | 246 +++++++++++++++
include/linux/mfd/aat2870.h | 182 +++++++++++
10 files changed, 1249 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/aat2870-core.c
create mode 100644 drivers/regulator/aat2870-regulator.c
create mode 100644 drivers/video/backlight/aat2870_bl.c
create mode 100644 include/linux/mfd/aat2870.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0f09c05..5d3e906 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -728,6 +728,13 @@ config MFD_TPS65910
if you say yes here you get support for the TPS65910 series of
Power Management chips.

+config MFD_AAT2870_CORE
+ bool "Support for the AnlogicTech AAT2870"
+ select MFD_CORE
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the AAT2870.
+
endif # MFD_SUPPORT

menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index efe3cc3..498eb42 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
+obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
new file mode 100644
index 0000000..0d9687a
--- /dev/null
+++ b/drivers/mfd/aat2870-core.c
@@ -0,0 +1,532 @@
+/*
+ * linux/drivers/mfd/aat2870-core.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/aat2870.h>
+#include <linux/regulator/machine.h>
+
+static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = {
+ /* readable, writeable, value */
+ { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */
+ { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */
+ { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */
+ { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */
+ { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */
+ { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */
+ { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */
+ { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */
+ { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */
+ { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */
+ { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */
+ { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */
+ { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */
+ { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */
+ { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */
+ { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */
+ { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */
+ { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */
+ { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */
+ { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */
+ { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */
+ { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */
+ { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */
+ { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */
+ { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */
+ { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */
+ { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */
+ { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */
+ { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */
+ { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */
+ { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */
+ { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */
+ { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */
+ { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */
+ { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */
+ { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */
+ { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */
+ { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */
+ { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */
+};
+
+static struct mfd_cell aat2870_devs[] = {
+ {
+ .name = "aat2870-backlight",
+ .id = AAT2870_ID_BL,
+ .pdata_size = sizeof(struct aat2870_bl_platform_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOA,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOB,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOC,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOD,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+};
+
+static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
+{
+ struct i2c_client *client = aat2870->client;
+ int ret = 0;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aat2870->io_lock);
+
+ if (!aat2870->reg_cache[addr].readable) {
+ *val = aat2870->reg_cache[addr].value;
+ goto out_unlock;
+ }
+
+ ret = i2c_master_send(client, &addr, 1);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 1) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ ret = i2c_master_recv(client, val, 1);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 1) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+ dev_dbg(&client->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val);
+
+ return ret;
+}
+
+static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
+{
+ struct i2c_client *client = aat2870->client;
+ u8 msg[2];
+ int ret = 0;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ if (!aat2870->reg_cache[addr].writeable) {
+ dev_err(aat2870->dev, "Address 0x%02x is not writeable\n",
+ addr);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aat2870->io_lock);
+
+ msg[0] = addr;
+ msg[1] = val;
+ ret = i2c_master_send(client, msg, 2);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 2) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ aat2870->reg_cache[addr].value = val;
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+ dev_dbg(&client->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val);
+
+ return ret;
+}
+
+static int aat2870_update_bits(struct aat2870_data *aat2870, u8 addr,
+ u8 mask, u8 val)
+{
+ int change;
+ u8 old_val, new_val;
+ int ret;
+
+ ret = aat2870->read(aat2870, addr, &old_val);
+ if (ret)
+ return ret;
+
+ new_val = (old_val & ~mask) | val;
+ change = old_val != new_val;
+ if (change)
+ ret = aat2870->write(aat2870, addr, new_val);
+
+ dev_dbg(&aat2870->client->dev,
+ "update_bits: change=%d, addr=0x%02x, old=0x%02x, new=0x%02x\n",
+ change, addr, old_val, new_val);
+
+ return ret;
+}
+
+static inline void aat2870_enable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 1);
+
+ aat2870->is_enable = 1;
+}
+
+static inline void aat2870_disable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 0);
+
+ aat2870->is_enable = 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
+{
+ u8 addr, val;
+ ssize_t count = 0;
+ int ret;
+
+ count += sprintf(buf, "aat2870 registers\n");
+ for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
+ count += sprintf(buf + count, "0x%02x: ", addr);
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ ret = aat2870->read(aat2870, addr, &val);
+ if (ret == 0)
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "0x%02x", val);
+ else
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "<read fail: %d>", ret);
+
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ count += snprintf(buf + count, PAGE_SIZE - count, "\n");
+ if (count >= PAGE_SIZE - 1)
+ break;
+ }
+
+ /* Truncate count; min() would cause a warning */
+ if (count >= PAGE_SIZE)
+ count = PAGE_SIZE - 1;
+
+ return count;
+}
+
+static int aat2870_reg_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char *buf;
+ ssize_t ret;
+
+ buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = aat2870_dump_reg(aat2870, buf);
+ if (ret >= 0)
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t aat2870_reg_write_file(struct file *file,
+ const char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char buf[32];
+ int buf_size;
+ char *start = buf;
+ unsigned long addr, val;
+ int ret;
+
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size)) {
+ dev_err(aat2870->dev, "Failed to copy from user\n");
+ return -EFAULT;
+ }
+ buf[buf_size] = 0;
+
+ while (*start == ' ')
+ start++;
+
+ addr = simple_strtoul(start, &start, 16);
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr);
+ return -EINVAL;
+ }
+
+ while (*start == ' ')
+ start++;
+
+ if (strict_strtoul(start, 16, &val))
+ return -EINVAL;
+
+ ret = aat2870->write(aat2870, (u8)addr, (u8)val);
+ if (ret)
+ return ret;
+
+ return buf_size;
+}
+
+static const struct file_operations aat2870_reg_fops = {
+ .open = aat2870_reg_open_file,
+ .read = aat2870_reg_read_file,
+ .write = aat2870_reg_write_file,
+};
+
+static void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+ aat2870->dentry_root = debugfs_create_dir("aat2870", NULL);
+ if (!aat2870->dentry_root) {
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs root directory\n");
+ return;
+ }
+
+ aat2870->dentry_reg = debugfs_create_file("regs", 0644,
+ aat2870->dentry_root,
+ aat2870, &aat2870_reg_fops);
+ if (!aat2870->dentry_reg)
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs register file\n");
+}
+
+static void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+ debugfs_remove_recursive(aat2870->dentry_root);
+}
+#else
+static inline void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+}
+
+static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int aat2870_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct aat2870_platform_data *pdata = client->dev.platform_data;
+ struct aat2870_data *aat2870;
+ int i, j;
+ int ret = 0;
+
+ aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+ if (!aat2870) {
+ dev_err(&client->dev,
+ "Failed to allocate memory for aat2870\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ aat2870->dev = &client->dev;
+ dev_set_drvdata(aat2870->dev, aat2870);
+
+ aat2870->client = client;
+ i2c_set_clientdata(client, aat2870);
+
+ aat2870->reg_cache = aat2870_regs;
+
+ if (pdata->en_pin < 0)
+ aat2870->en_pin = -1;
+ else
+ aat2870->en_pin = pdata->en_pin;
+
+ aat2870->init = pdata->init;
+ aat2870->uninit = pdata->uninit;
+ aat2870->read = aat2870_read;
+ aat2870->write = aat2870_write;
+ aat2870->update_bits = aat2870_update_bits;
+
+ mutex_init(&aat2870->io_lock);
+
+ if (aat2870->init)
+ aat2870->init(aat2870);
+
+ if (aat2870->en_pin >= 0) {
+ ret = gpio_request(aat2870->en_pin, "aat2870-en");
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to request GPIO %d\n", aat2870->en_pin);
+ goto out_kfree;
+ }
+ gpio_direction_output(aat2870->en_pin, 1);
+ }
+
+ aat2870_enable(aat2870);
+
+ for (i = 0; i < pdata->num_subdevs; i++) {
+ for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) {
+ if ((pdata->subdevs[i].id == aat2870_devs[j].id) &&
+ !strcmp(pdata->subdevs[i].name,
+ aat2870_devs[j].name)) {
+ aat2870_devs[j].platform_data =
+ pdata->subdevs[i].platform_data;
+ break;
+ }
+ }
+ }
+
+ ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
+ ARRAY_SIZE(aat2870_devs), NULL, 0);
+ if (ret != 0) {
+ dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
+ goto out_disable;
+ }
+
+ aat2870_init_debugfs(aat2870);
+
+ return 0;
+
+out_disable:
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+out_kfree:
+ kfree(aat2870);
+out:
+ return ret;
+}
+
+static int aat2870_i2c_remove(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_uninit_debugfs(aat2870);
+
+ mfd_remove_devices(aat2870->dev);
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+ if (aat2870->uninit)
+ aat2870->uninit(aat2870);
+ kfree(aat2870);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_disable(aat2870);
+
+ return 0;
+}
+
+static int aat2870_i2c_resume(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+ struct aat2870_register *reg = NULL;
+ int i;
+
+ aat2870_enable(aat2870);
+
+ /* restore registers */
+ for (i = 0; i < AAT2870_REG_NUM; i++) {
+ reg = &aat2870->reg_cache[i];
+ if (reg->writeable)
+ aat2870->write(aat2870, i, reg->value);
+ }
+
+ return 0;
+}
+#else
+#define aat2870_i2c_suspend NULL
+#define aat2870_i2c_resume NULL
+#endif /* CONFIG_PM */
+
+static struct i2c_device_id aat2870_i2c_id_table[] = {
+ { "aat2870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table);
+
+static struct i2c_driver aat2870_i2c_driver = {
+ .driver = {
+ .name = "aat2870",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_i2c_probe,
+ .remove = aat2870_i2c_remove,
+ .suspend = aat2870_i2c_suspend,
+ .resume = aat2870_i2c_resume,
+ .id_table = aat2870_i2c_id_table,
+};
+
+static int __init aat2870_init(void)
+{
+ return i2c_add_driver(&aat2870_i2c_driver);
+}
+subsys_initcall(aat2870_init);
+
+static void __exit aat2870_exit(void)
+{
+ i2c_del_driver(&aat2870_i2c_driver);
+}
+module_exit(aat2870_exit);
+
+MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d7ed20f..0f37466 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -303,5 +303,12 @@ config REGULATOR_TPS65910
help
This driver supports TPS65910 voltage regulator chips.

+config REGULATOR_AAT2870
+ bool "AnalogicTech AAT2870 Regulators"
+ depends on MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ regulator driver.
+
endif

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3932d2e..8b8f3bc 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -43,5 +43,6 @@ obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
+obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o

ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
new file mode 100644
index 0000000..e751c06
--- /dev/null
+++ b/drivers/regulator/aat2870-regulator.c
@@ -0,0 +1,265 @@
+/*
+ * linux/drivers/regulator/aat2870-regulator.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_regulator {
+ struct platform_device *pdev;
+ struct regulator_desc desc;
+
+ int *voltages; /* uV */
+
+ int min_uV;
+ int max_uV;
+
+ u8 enable_addr;
+ u8 enable_shift;
+ u8 enable_mask;
+
+ u8 voltage_addr;
+ u8 voltage_shift;
+ u8 voltage_mask;
+};
+
+static int aat2870_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+
+ return ri->voltages[selector];
+}
+
+static int aat2870_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV, unsigned *selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int uV;
+ int i;
+
+ if ((min_uV < ri->min_uV) || (max_uV > ri->max_uV)) {
+ dev_err(&rdev->dev,
+ "Invalid voltage, min %duV(>=%duV), max %duV(<=%duV)\n",
+ min_uV, ri->min_uV, max_uV, ri->max_uV);
+ return -EDOM;
+ }
+
+ for (i = 0; i < ri->desc.n_voltages; i++) {
+ uV = ri->voltages[i];
+ if ((min_uV <= uV) && (uV <= max_uV)) {
+ val = (i << ri->voltage_shift) & ri->voltage_mask;
+ break;
+ }
+ }
+
+ if (i >= ri->desc.n_voltages)
+ return -EINVAL;
+
+ *selector = i;
+
+ return aat2870->update_bits(aat2870, ri->voltage_addr,
+ ri->voltage_mask, val);
+}
+
+static int aat2870_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->voltage_addr, &val);
+ if (ret)
+ return ret;
+
+ val = (val & ri->voltage_mask) >> ri->voltage_shift;
+ if (val >= ri->desc.n_voltages)
+ return -EIO;
+
+ return ri->voltages[val];
+}
+
+static int aat2870_ldo_enable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update_bits(aat2870, ri->enable_addr,
+ ri->enable_mask, ri->enable_mask);
+}
+
+static int aat2870_ldo_disable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update_bits(aat2870, ri->enable_addr,
+ ri->enable_mask, 0);
+}
+
+static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->enable_addr, &val);
+ if (ret)
+ return ret;
+
+ return val & ri->enable_mask ? 1 : 0;
+}
+
+static struct regulator_ops aat2870_ldo_ops = {
+ .list_voltage = aat2870_ldo_list_voltage,
+ .set_voltage = aat2870_ldo_set_voltage,
+ .get_voltage = aat2870_ldo_get_voltage,
+ .enable = aat2870_ldo_enable,
+ .disable = aat2870_ldo_disable,
+ .is_enabled = aat2870_ldo_is_enabled,
+};
+
+static int aat2870_ldo_voltages[] = {
+ 1200000, 1300000, 1500000, 1600000,
+ 1800000, 2000000, 2200000, 2500000,
+ 2600000, 2700000, 2800000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+#define AAT2870_LDO(ids) \
+ { \
+ .desc = { \
+ .name = #ids, \
+ .id = AAT2870_ID_##ids, \
+ .n_voltages = ARRAY_SIZE(aat2870_ldo_voltages), \
+ .ops = &aat2870_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ .voltages = aat2870_ldo_voltages, \
+ .min_uV = 1200000, \
+ .max_uV = 3300000, \
+ }
+
+static struct aat2870_regulator aat2870_regulators[] = {
+ AAT2870_LDO(LDOA),
+ AAT2870_LDO(LDOB),
+ AAT2870_LDO(LDOC),
+ AAT2870_LDO(LDOD),
+};
+
+static struct aat2870_regulator *aat2870_get_regulator(int id)
+{
+ struct aat2870_regulator *ri = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aat2870_regulators); i++) {
+ ri = &aat2870_regulators[i];
+ if (ri->desc.id == id)
+ break;
+ }
+
+ if (!ri)
+ return NULL;
+
+ ri->enable_addr = AAT2870_LDO_EN;
+ ri->enable_shift = id - AAT2870_ID_LDOA;
+ ri->enable_mask = 0x1 << ri->enable_shift;
+
+ ri->voltage_addr = (id - AAT2870_ID_LDOA) / 2 ?
+ AAT2870_LDO_CD : AAT2870_LDO_AB;
+ ri->voltage_shift = (id - AAT2870_ID_LDOA) % 2 ? 0 : 4;
+ ri->voltage_mask = 0xF << ri->voltage_shift;
+
+ return ri;
+}
+
+static int aat2870_regulator_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *init_data = pdev->dev.platform_data;
+ struct aat2870_regulator *ri;
+ struct regulator_dev *rdev;
+
+ if (!init_data) {
+ dev_err(&pdev->dev, "No regulator init data\n");
+ return -ENXIO;
+ }
+
+ ri = aat2870_get_regulator(pdev->id);
+ if (!ri) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ return -EINVAL;
+ }
+ ri->pdev = pdev;
+
+ rdev = regulator_register(&ri->desc, &pdev->dev, init_data, ri);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register regulator %s\n",
+ ri->desc.name);
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static int __devexit aat2870_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+ return 0;
+}
+
+static struct platform_driver aat2870_regulator_driver = {
+ .driver = {
+ .name = "aat2870-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_regulator_probe,
+ .remove = __devexit_p(aat2870_regulator_remove),
+};
+
+static int __init aat2870_regulator_init(void)
+{
+ return platform_driver_register(&aat2870_regulator_driver);
+}
+subsys_initcall(aat2870_regulator_init);
+
+static void __exit aat2870_regulator_exit(void)
+{
+ platform_driver_unregister(&aat2870_regulator_driver);
+}
+module_exit(aat2870_regulator_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Regulator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0c9373b..3fde1ec 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -315,6 +315,13 @@ config BACKLIGHT_PCF50633
If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
enable its driver.

+config BACKLIGHT_AAT2870
+ bool "AnalogicTech AAT2870 Backlight"
+ depends on ( BACKLIGHT_CLASS_DEVICE = y ) && MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE

endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b9ca849..2a08271 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -36,4 +36,5 @@ obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
+obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o

diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
new file mode 100644
index 0000000..4952a61
--- /dev/null
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -0,0 +1,246 @@
+/*
+ * linux/drivers/video/backlight/aat2870_bl.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_bl_driver_data {
+ struct platform_device *pdev;
+ struct backlight_device *bd;
+
+ int channels;
+ int max_current;
+ int brightness; /* current brightness */
+};
+
+static inline int aat2870_brightness(struct aat2870_bl_driver_data *aat2870_bl,
+ int brightness)
+{
+ struct backlight_device *bd = aat2870_bl->bd;
+ int val;
+
+ val = brightness * aat2870_bl->max_current;
+ val /= bd->props.max_brightness;
+
+ return val;
+}
+
+static inline int aat2870_bl_enable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN,
+ (u8)aat2870_bl->channels);
+}
+
+static inline int aat2870_bl_disable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN, 0x0);
+}
+
+static int aat2870_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int aat2870_bl_update_status(struct backlight_device *bd)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = dev_get_drvdata(&bd->dev);
+ struct aat2870_data *aat2870 =
+ dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+ int brightness = bd->props.brightness;
+ int ret;
+
+ if ((brightness < 0) || (bd->props.max_brightness < brightness)) {
+ dev_err(&bd->dev, "invalid brightness, %d\n", brightness);
+ return -EINVAL;
+ }
+
+ dev_dbg(&bd->dev, "brightness=%d, power=%d, state=%d\n",
+ bd->props.brightness, bd->props.power, bd->props.state);
+
+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
+ (bd->props.state & BL_CORE_FBBLANK) ||
+ (bd->props.state & BL_CORE_SUSPENDED))
+ brightness = 0;
+
+ ret = aat2870->write(aat2870, AAT2870_BLM,
+ (u8)aat2870_brightness(aat2870_bl, brightness));
+ if (ret < 0)
+ return ret;
+
+ if (brightness == 0) {
+ ret = aat2870_bl_disable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ } else if (aat2870_bl->brightness == 0) {
+ ret = aat2870_bl_enable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ }
+
+ aat2870_bl->brightness = brightness;
+
+ return 0;
+}
+
+static int aat2870_bl_check_fb(struct backlight_device *bd, struct fb_info *fi)
+{
+ return 1;
+}
+
+static const struct backlight_ops aat2870_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .get_brightness = aat2870_bl_get_brightness,
+ .update_status = aat2870_bl_update_status,
+ .check_fb = aat2870_bl_check_fb,
+};
+
+static int aat2870_bl_probe(struct platform_device *pdev)
+{
+ struct aat2870_bl_platform_data *pdata = pdev->dev.platform_data;
+ struct aat2870_bl_driver_data *aat2870_bl;
+ struct backlight_device *bd;
+ struct backlight_properties props;
+ int ret = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data\n");
+ ret = -ENXIO;
+ goto out;
+ }
+
+ if (pdev->id != AAT2870_ID_BL) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ aat2870_bl = kzalloc(sizeof(struct aat2870_bl_driver_data), GFP_KERNEL);
+ if (!aat2870_bl) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for aat2870 backlight\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+
+ props.type = BACKLIGHT_RAW;
+ bd = backlight_device_register("aat2870-backlight", &pdev->dev,
+ aat2870_bl, &aat2870_bl_ops, &props);
+ if (!bd) {
+ dev_err(&pdev->dev,
+ "Failed allocate memory for backlight device\n");
+ ret = -ENOMEM;
+ goto out_kfree;
+ }
+
+ aat2870_bl->pdev = pdev;
+ platform_set_drvdata(pdev, aat2870_bl);
+
+ aat2870_bl->bd = bd;
+
+ if (pdata->channels > 0)
+ aat2870_bl->channels = pdata->channels;
+ else
+ aat2870_bl->channels = AAT2870_BL_CH_ALL;
+
+ if (pdata->max_brightness > 0)
+ aat2870_bl->max_current = pdata->max_current;
+ else
+ aat2870_bl->max_current = AAT2870_CURRENT_27_9;
+
+ if (pdata->max_brightness > 0)
+ bd->props.max_brightness = pdata->max_brightness;
+ else
+ bd->props.max_brightness = 255;
+
+ aat2870_bl->brightness = 0;
+ bd->props.power = FB_BLANK_UNBLANK;
+ bd->props.brightness = bd->props.max_brightness;
+
+ ret = aat2870_bl_update_status(bd);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to initialize\n");
+ goto out_bl_dev_unregister;
+ }
+
+ return 0;
+
+out_bl_dev_unregister:
+ backlight_device_unregister(bd);
+out_kfree:
+ kfree(aat2870_bl);
+out:
+ return ret;
+}
+
+static int aat2870_bl_remove(struct platform_device *pdev)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = platform_get_drvdata(pdev);
+ struct backlight_device *bd = aat2870_bl->bd;
+
+ bd->props.power = FB_BLANK_POWERDOWN;
+ bd->props.brightness = 0;
+ backlight_update_status(bd);
+
+ backlight_device_unregister(bd);
+ kfree(aat2870_bl);
+
+ return 0;
+}
+
+static struct platform_driver aat2870_bl_driver = {
+ .driver = {
+ .name = "aat2870-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_bl_probe,
+ .remove = aat2870_bl_remove,
+};
+
+static int __init aat2870_bl_init(void)
+{
+ return platform_driver_register(&aat2870_bl_driver);
+}
+subsys_initcall(aat2870_bl_init);
+
+static void __exit aat2870_bl_exit(void)
+{
+ platform_driver_unregister(&aat2870_bl_driver);
+}
+module_exit(aat2870_bl_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Backlight");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h
new file mode 100644
index 0000000..d9ea3a2
--- /dev/null
+++ b/include/linux/mfd/aat2870.h
@@ -0,0 +1,182 @@
+/*
+ * linux/include/linux/mfd/aat2870.h
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_MFD_AAT2870_H
+#define __LINUX_MFD_AAT2870_H
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+
+/* Register offsets */
+#define AAT2870_BL_CH_EN 0x00
+#define AAT2870_BLM 0x01
+#define AAT2870_BLS 0x02
+#define AAT2870_BL1 0x03
+#define AAT2870_BL2 0x04
+#define AAT2870_BL3 0x05
+#define AAT2870_BL4 0x06
+#define AAT2870_BL5 0x07
+#define AAT2870_BL6 0x08
+#define AAT2870_BL7 0x09
+#define AAT2870_BL8 0x0A
+#define AAT2870_FLR 0x0B
+#define AAT2870_FM 0x0C
+#define AAT2870_FS 0x0D
+#define AAT2870_ALS_CFG0 0x0E
+#define AAT2870_ALS_CFG1 0x0F
+#define AAT2870_ALS_CFG2 0x10
+#define AAT2870_AMB 0x11
+#define AAT2870_ALS0 0x12
+#define AAT2870_ALS1 0x13
+#define AAT2870_ALS2 0x14
+#define AAT2870_ALS3 0x15
+#define AAT2870_ALS4 0x16
+#define AAT2870_ALS5 0x17
+#define AAT2870_ALS6 0x18
+#define AAT2870_ALS7 0x19
+#define AAT2870_ALS8 0x1A
+#define AAT2870_ALS9 0x1B
+#define AAT2870_ALSA 0x1C
+#define AAT2870_ALSB 0x1D
+#define AAT2870_ALSC 0x1E
+#define AAT2870_ALSD 0x1F
+#define AAT2870_ALSE 0x20
+#define AAT2870_ALSF 0x21
+#define AAT2870_SUB_SET 0x22
+#define AAT2870_SUB_CTRL 0x23
+#define AAT2870_LDO_AB 0x24
+#define AAT2870_LDO_CD 0x25
+#define AAT2870_LDO_EN 0x26
+#define AAT2870_REG_NUM 0x27
+
+/* Device IDs */
+enum aat2870_id {
+ AAT2870_ID_BL,
+ AAT2870_ID_LDOA,
+ AAT2870_ID_LDOB,
+ AAT2870_ID_LDOC,
+ AAT2870_ID_LDOD
+};
+
+/* Backlight channels */
+#define AAT2870_BL_CH1 0x01
+#define AAT2870_BL_CH2 0x02
+#define AAT2870_BL_CH3 0x04
+#define AAT2870_BL_CH4 0x08
+#define AAT2870_BL_CH5 0x10
+#define AAT2870_BL_CH6 0x20
+#define AAT2870_BL_CH7 0x40
+#define AAT2870_BL_CH8 0x80
+#define AAT2870_BL_CH_ALL 0xFF
+
+/* Backlight current magnitude (mA) */
+enum aat2870_current {
+ AAT2870_CURRENT_0_45 = 0,
+ AAT2870_CURRENT_0_90,
+ AAT2870_CURRENT_1_80,
+ AAT2870_CURRENT_2_70,
+ AAT2870_CURRENT_3_60,
+ AAT2870_CURRENT_4_50,
+ AAT2870_CURRENT_5_40,
+ AAT2870_CURRENT_6_30,
+ AAT2870_CURRENT_7_20,
+ AAT2870_CURRENT_8_10,
+ AAT2870_CURRENT_9_00 = 10,
+ AAT2870_CURRENT_9_90,
+ AAT2870_CURRENT_10_8,
+ AAT2870_CURRENT_11_7,
+ AAT2870_CURRENT_12_6,
+ AAT2870_CURRENT_13_5,
+ AAT2870_CURRENT_14_4,
+ AAT2870_CURRENT_15_3,
+ AAT2870_CURRENT_16_2,
+ AAT2870_CURRENT_17_1,
+ AAT2870_CURRENT_18_0 = 20,
+ AAT2870_CURRENT_18_9,
+ AAT2870_CURRENT_19_8,
+ AAT2870_CURRENT_20_7,
+ AAT2870_CURRENT_21_6,
+ AAT2870_CURRENT_22_5,
+ AAT2870_CURRENT_23_4,
+ AAT2870_CURRENT_24_3,
+ AAT2870_CURRENT_25_2,
+ AAT2870_CURRENT_26_1,
+ AAT2870_CURRENT_27_0 = 30,
+ AAT2870_CURRENT_27_9
+};
+
+struct aat2870_register {
+ int readable;
+ int writeable;
+ u8 value;
+};
+
+struct aat2870_data {
+ struct device *dev;
+ struct i2c_client *client;
+
+ struct mutex io_lock;
+ struct aat2870_register *reg_cache; /* register cache */
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+ int is_enable;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+
+ /* i2c io funcntions */
+ int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
+ int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
+ int (*update_bits)(struct aat2870_data *aat2870, u8 addr, u8 mask,
+ u8 val);
+
+ /* for debugfs */
+ struct dentry *dentry_root;
+ struct dentry *dentry_reg;
+};
+
+struct aat2870_subdev_info {
+ int id;
+ const char *name;
+ void *platform_data;
+};
+
+struct aat2870_platform_data {
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+
+ struct aat2870_subdev_info *subdevs;
+ int num_subdevs;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+};
+
+struct aat2870_bl_platform_data {
+ /* backlight channels, default is AAT2870_BL_CH_ALL */
+ int channels;
+ /* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
+ int max_current;
+ /* maximum brightness, default is 255 */
+ int max_brightness;
+};
+
+#endif /* __LINUX_MFD_AAT2870_H */
--
1.7.1

2011-05-30 09:09:44

by Joe Perches

[permalink] [raw]
Subject: Re: [PATCH 1/1] aat2870: Adding backlight, regulator and mfd driver

On Mon, 2011-05-30 at 17:17 +0900, Jin Park wrote:
> Adding backlight, regulator and mfd driver for AnalogicTech AAT2870.
> Signed-off-by: Jin Park <[email protected]>

Hi Jin, just trivia

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
[]
> +config MFD_AAT2870_CORE
> + bool "Support for the AnlogicTech AAT2870"

Analogic

> +++ b/drivers/mfd/aat2870-core.c
[]
> +static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = {

Might describe this as the reg_cache as well.
readable, writable could be bool.

> + /* readable, writeable, value */
> + { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */

[]

> diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
[]
> +static int aat2870_ldo_voltages[] = {

static const int?

> + 1200000, 1300000, 1500000, 1600000,
> + 1800000, 2000000, 2200000, 2500000,
> + 2600000, 2700000, 2800000, 2900000,
> + 3000000, 3100000, 3200000, 3300000,

[]

> diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h
[]
> +/* Backlight current magnitude (mA) */
> +enum aat2870_current {
> + AAT2870_CURRENT_0_45 = 0,

Seems odd and error prone to add enum = value
every 10 places.

> + AAT2870_CURRENT_0_90,
> + AAT2870_CURRENT_1_80,
> + AAT2870_CURRENT_2_70,
> + AAT2870_CURRENT_3_60,
> + AAT2870_CURRENT_4_50,
> + AAT2870_CURRENT_5_40,
> + AAT2870_CURRENT_6_30,
> + AAT2870_CURRENT_7_20,
> + AAT2870_CURRENT_8_10,
> + AAT2870_CURRENT_9_00 = 10,
[]
> +struct aat2870_register {
> + int readable;
> + int writeable;

bool?

> +struct aat2870_data {
> + struct device *dev;
> + struct i2c_client *client;
> +
> + struct mutex io_lock;
> + struct aat2870_register *reg_cache; /* register cache */
> + int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
> + int is_enable;

bool?

2011-05-31 04:25:54

by Jinyoung Park

[permalink] [raw]
Subject: RE: [PATCH 1/1] aat2870: Adding backlight, regulator and mfd driver

Joe, thanks for your code review.

Samuel,
Re-sending the driver what applied Joe's comment.
Please review the driver.

Thanks,
Jinyoung.


Adding backlight, regulator and mfd driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <[email protected]>
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/aat2870-core.c | 532 +++++++++++++++++++++++++++++++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/aat2870-regulator.c | 265 ++++++++++++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/aat2870_bl.c | 246 +++++++++++++++
include/linux/mfd/aat2870.h | 182 +++++++++++
10 files changed, 1252 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/aat2870-core.c
create mode 100644 drivers/regulator/aat2870-regulator.c
create mode 100644 drivers/video/backlight/aat2870_bl.c
create mode 100644 include/linux/mfd/aat2870.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0f09c05..6039ba2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -728,6 +728,16 @@ config MFD_TPS65910
if you say yes here you get support for the TPS65910 series of
Power Management chips.

+config MFD_AAT2870_CORE
+ bool "Support for the AnalogicTech AAT2870"
+ select MFD_CORE
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the AAT2870.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
endif # MFD_SUPPORT

menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index efe3cc3..498eb42 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
+obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
new file mode 100644
index 0000000..0d9687a
--- /dev/null
+++ b/drivers/mfd/aat2870-core.c
@@ -0,0 +1,532 @@
+/*
+ * linux/drivers/mfd/aat2870-core.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/aat2870.h>
+#include <linux/regulator/machine.h>
+
+static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = {
+ /* readable, writeable, value */
+ { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */
+ { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */
+ { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */
+ { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */
+ { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */
+ { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */
+ { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */
+ { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */
+ { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */
+ { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */
+ { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */
+ { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */
+ { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */
+ { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */
+ { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */
+ { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */
+ { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */
+ { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */
+ { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */
+ { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */
+ { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */
+ { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */
+ { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */
+ { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */
+ { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */
+ { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */
+ { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */
+ { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */
+ { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */
+ { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */
+ { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */
+ { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */
+ { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */
+ { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */
+ { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */
+ { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */
+ { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */
+ { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */
+ { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */
+};
+
+static struct mfd_cell aat2870_devs[] = {
+ {
+ .name = "aat2870-backlight",
+ .id = AAT2870_ID_BL,
+ .pdata_size = sizeof(struct aat2870_bl_platform_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOA,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOB,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOC,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOD,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+};
+
+static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
+{
+ struct i2c_client *client = aat2870->client;
+ int ret = 0;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aat2870->io_lock);
+
+ if (!aat2870->reg_cache[addr].readable) {
+ *val = aat2870->reg_cache[addr].value;
+ goto out_unlock;
+ }
+
+ ret = i2c_master_send(client, &addr, 1);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 1) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ ret = i2c_master_recv(client, val, 1);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 1) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+ dev_dbg(&client->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val);
+
+ return ret;
+}
+
+static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
+{
+ struct i2c_client *client = aat2870->client;
+ u8 msg[2];
+ int ret = 0;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ if (!aat2870->reg_cache[addr].writeable) {
+ dev_err(aat2870->dev, "Address 0x%02x is not writeable\n",
+ addr);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aat2870->io_lock);
+
+ msg[0] = addr;
+ msg[1] = val;
+ ret = i2c_master_send(client, msg, 2);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 2) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ aat2870->reg_cache[addr].value = val;
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+ dev_dbg(&client->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val);
+
+ return ret;
+}
+
+static int aat2870_update_bits(struct aat2870_data *aat2870, u8 addr,
+ u8 mask, u8 val)
+{
+ int change;
+ u8 old_val, new_val;
+ int ret;
+
+ ret = aat2870->read(aat2870, addr, &old_val);
+ if (ret)
+ return ret;
+
+ new_val = (old_val & ~mask) | val;
+ change = old_val != new_val;
+ if (change)
+ ret = aat2870->write(aat2870, addr, new_val);
+
+ dev_dbg(&aat2870->client->dev,
+ "update_bits: change=%d, addr=0x%02x, old=0x%02x, new=0x%02x\n",
+ change, addr, old_val, new_val);
+
+ return ret;
+}
+
+static inline void aat2870_enable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 1);
+
+ aat2870->is_enable = 1;
+}
+
+static inline void aat2870_disable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 0);
+
+ aat2870->is_enable = 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
+{
+ u8 addr, val;
+ ssize_t count = 0;
+ int ret;
+
+ count += sprintf(buf, "aat2870 registers\n");
+ for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
+ count += sprintf(buf + count, "0x%02x: ", addr);
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ ret = aat2870->read(aat2870, addr, &val);
+ if (ret == 0)
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "0x%02x", val);
+ else
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "<read fail: %d>", ret);
+
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ count += snprintf(buf + count, PAGE_SIZE - count, "\n");
+ if (count >= PAGE_SIZE - 1)
+ break;
+ }
+
+ /* Truncate count; min() would cause a warning */
+ if (count >= PAGE_SIZE)
+ count = PAGE_SIZE - 1;
+
+ return count;
+}
+
+static int aat2870_reg_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char *buf;
+ ssize_t ret;
+
+ buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = aat2870_dump_reg(aat2870, buf);
+ if (ret >= 0)
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t aat2870_reg_write_file(struct file *file,
+ const char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char buf[32];
+ int buf_size;
+ char *start = buf;
+ unsigned long addr, val;
+ int ret;
+
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size)) {
+ dev_err(aat2870->dev, "Failed to copy from user\n");
+ return -EFAULT;
+ }
+ buf[buf_size] = 0;
+
+ while (*start == ' ')
+ start++;
+
+ addr = simple_strtoul(start, &start, 16);
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr);
+ return -EINVAL;
+ }
+
+ while (*start == ' ')
+ start++;
+
+ if (strict_strtoul(start, 16, &val))
+ return -EINVAL;
+
+ ret = aat2870->write(aat2870, (u8)addr, (u8)val);
+ if (ret)
+ return ret;
+
+ return buf_size;
+}
+
+static const struct file_operations aat2870_reg_fops = {
+ .open = aat2870_reg_open_file,
+ .read = aat2870_reg_read_file,
+ .write = aat2870_reg_write_file,
+};
+
+static void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+ aat2870->dentry_root = debugfs_create_dir("aat2870", NULL);
+ if (!aat2870->dentry_root) {
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs root directory\n");
+ return;
+ }
+
+ aat2870->dentry_reg = debugfs_create_file("regs", 0644,
+ aat2870->dentry_root,
+ aat2870, &aat2870_reg_fops);
+ if (!aat2870->dentry_reg)
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs register file\n");
+}
+
+static void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+ debugfs_remove_recursive(aat2870->dentry_root);
+}
+#else
+static inline void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+}
+
+static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int aat2870_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct aat2870_platform_data *pdata = client->dev.platform_data;
+ struct aat2870_data *aat2870;
+ int i, j;
+ int ret = 0;
+
+ aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+ if (!aat2870) {
+ dev_err(&client->dev,
+ "Failed to allocate memory for aat2870\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ aat2870->dev = &client->dev;
+ dev_set_drvdata(aat2870->dev, aat2870);
+
+ aat2870->client = client;
+ i2c_set_clientdata(client, aat2870);
+
+ aat2870->reg_cache = aat2870_regs;
+
+ if (pdata->en_pin < 0)
+ aat2870->en_pin = -1;
+ else
+ aat2870->en_pin = pdata->en_pin;
+
+ aat2870->init = pdata->init;
+ aat2870->uninit = pdata->uninit;
+ aat2870->read = aat2870_read;
+ aat2870->write = aat2870_write;
+ aat2870->update_bits = aat2870_update_bits;
+
+ mutex_init(&aat2870->io_lock);
+
+ if (aat2870->init)
+ aat2870->init(aat2870);
+
+ if (aat2870->en_pin >= 0) {
+ ret = gpio_request(aat2870->en_pin, "aat2870-en");
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to request GPIO %d\n", aat2870->en_pin);
+ goto out_kfree;
+ }
+ gpio_direction_output(aat2870->en_pin, 1);
+ }
+
+ aat2870_enable(aat2870);
+
+ for (i = 0; i < pdata->num_subdevs; i++) {
+ for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) {
+ if ((pdata->subdevs[i].id == aat2870_devs[j].id) &&
+ !strcmp(pdata->subdevs[i].name,
+ aat2870_devs[j].name)) {
+ aat2870_devs[j].platform_data =
+ pdata->subdevs[i].platform_data;
+ break;
+ }
+ }
+ }
+
+ ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
+ ARRAY_SIZE(aat2870_devs), NULL, 0);
+ if (ret != 0) {
+ dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
+ goto out_disable;
+ }
+
+ aat2870_init_debugfs(aat2870);
+
+ return 0;
+
+out_disable:
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+out_kfree:
+ kfree(aat2870);
+out:
+ return ret;
+}
+
+static int aat2870_i2c_remove(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_uninit_debugfs(aat2870);
+
+ mfd_remove_devices(aat2870->dev);
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+ if (aat2870->uninit)
+ aat2870->uninit(aat2870);
+ kfree(aat2870);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_disable(aat2870);
+
+ return 0;
+}
+
+static int aat2870_i2c_resume(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+ struct aat2870_register *reg = NULL;
+ int i;
+
+ aat2870_enable(aat2870);
+
+ /* restore registers */
+ for (i = 0; i < AAT2870_REG_NUM; i++) {
+ reg = &aat2870->reg_cache[i];
+ if (reg->writeable)
+ aat2870->write(aat2870, i, reg->value);
+ }
+
+ return 0;
+}
+#else
+#define aat2870_i2c_suspend NULL
+#define aat2870_i2c_resume NULL
+#endif /* CONFIG_PM */
+
+static struct i2c_device_id aat2870_i2c_id_table[] = {
+ { "aat2870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table);
+
+static struct i2c_driver aat2870_i2c_driver = {
+ .driver = {
+ .name = "aat2870",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_i2c_probe,
+ .remove = aat2870_i2c_remove,
+ .suspend = aat2870_i2c_suspend,
+ .resume = aat2870_i2c_resume,
+ .id_table = aat2870_i2c_id_table,
+};
+
+static int __init aat2870_init(void)
+{
+ return i2c_add_driver(&aat2870_i2c_driver);
+}
+subsys_initcall(aat2870_init);
+
+static void __exit aat2870_exit(void)
+{
+ i2c_del_driver(&aat2870_i2c_driver);
+}
+module_exit(aat2870_exit);
+
+MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d7ed20f..0f37466 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -303,5 +303,12 @@ config REGULATOR_TPS65910
help
This driver supports TPS65910 voltage regulator chips.

+config REGULATOR_AAT2870
+ bool "AnalogicTech AAT2870 Regulators"
+ depends on MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ regulator driver.
+
endif

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3932d2e..8b8f3bc 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -43,5 +43,6 @@ obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
+obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o

ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
new file mode 100644
index 0000000..a26bcc9
--- /dev/null
+++ b/drivers/regulator/aat2870-regulator.c
@@ -0,0 +1,265 @@
+/*
+ * linux/drivers/regulator/aat2870-regulator.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */X-NVConfidentiality: public
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_regulator {
+ struct platform_device *pdev;
+ struct regulator_desc desc;
+
+ const int *voltages; /* uV */
+
+ int min_uV;
+ int max_uV;
+
+ u8 enable_addr;
+ u8 enable_shift;
+ u8 enable_mask;
+
+ u8 voltage_addr;
+ u8 voltage_shift;
+ u8 voltage_mask;
+};
+
+static int aat2870_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+
+ return ri->voltages[selector];
+}
+
+static int aat2870_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV, unsigned *selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int uV;
+ int i;
+
+ if ((min_uV < ri->min_uV) || (max_uV > ri->max_uV)) {
+ dev_err(&rdev->dev,
+ "Invalid voltage, min %duV(>=%duV), max %duV(<=%duV)\n",
+ min_uV, ri->min_uV, max_uV, ri->max_uV);
+ return -EDOM;
+ }
+
+ for (i = 0; i < ri->desc.n_voltages; i++) {
+ uV = ri->voltages[i];
+ if ((min_uV <= uV) && (uV <= max_uV)) {
+ val = (i << ri->voltage_shift) & ri->voltage_mask;
+ break;
+ }
+ }
+
+ if (i >= ri->desc.n_voltages)
+ return -EINVAL;
+
+ *selector = i;
+
+ return aat2870->update_bits(aat2870, ri->voltage_addr,
+ ri->voltage_mask, val);
+}
+
+static int aat2870_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->voltage_addr, &val);
+ if (ret)
+ return ret;
+
+ val = (val & ri->voltage_mask) >> ri->voltage_shift;
+ if (val >= ri->desc.n_voltages)
+ return -EIO;
+
+ return ri->voltages[val];
+}
+
+static int aat2870_ldo_enable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update_bits(aat2870, ri->enable_addr,
+ ri->enable_mask, ri->enable_mask);
+}
+
+static int aat2870_ldo_disable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update_bits(aat2870, ri->enable_addr,
+ ri->enable_mask, 0);
+}
+
+static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->enable_addr, &val);
+ if (ret)
+ return ret;
+
+ return val & ri->enable_mask ? 1 : 0;
+}
+
+static struct regulator_ops aat2870_ldo_ops = {
+ .list_voltage = aat2870_ldo_list_voltage,
+ .set_voltage = aat2870_ldo_set_voltage,
+ .get_voltage = aat2870_ldo_get_voltage,
+ .enable = aat2870_ldo_enable,
+ .disable = aat2870_ldo_disable,
+ .is_enabled = aat2870_ldo_is_enabled,
+};
+
+static const int aat2870_ldo_voltages[] = {
+ 1200000, 1300000, 1500000, 1600000,
+ 1800000, 2000000, 2200000, 2500000,
+ 2600000, 2700000, 2800000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+#define AAT2870_LDO(ids) \
+ { \
+ .desc = { \
+ .name = #ids, \
+ .id = AAT2870_ID_##ids, \
+ .n_voltages = ARRAY_SIZE(aat2870_ldo_voltages), \
+ .ops = &aat2870_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ .voltages = aat2870_ldo_voltages, \
+ .min_uV = 1200000, \
+ .max_uV = 3300000, \
+ }
+
+static struct aat2870_regulator aat2870_regulators[] = {
+ AAT2870_LDO(LDOA),
+ AAT2870_LDO(LDOB),
+ AAT2870_LDO(LDOC),
+ AAT2870_LDO(LDOD),
+};
+
+static struct aat2870_regulator *aat2870_get_regulator(int id)
+{
+ struct aat2870_regulator *ri = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aat2870_regulators); i++) {
+ ri = &aat2870_regulators[i];
+ if (ri->desc.id == id)
+ break;
+ }
+
+ if (!ri)
+ return NULL;
+
+ ri->enable_addr = AAT2870_LDO_EN;
+ ri->enable_shift = id - AAT2870_ID_LDOA;
+ ri->enable_mask = 0x1 << ri->enable_shift;
+
+ ri->voltage_addr = (id - AAT2870_ID_LDOA) / 2 ?
+ AAT2870_LDO_CD : AAT2870_LDO_AB;
+ ri->voltage_shift = (id - AAT2870_ID_LDOA) % 2 ? 0 : 4;
+ ri->voltage_mask = 0xF << ri->voltage_shift;
+
+ return ri;
+}
+
+static int aat2870_regulator_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *init_data = pdev->dev.platform_data;
+ struct aat2870_regulator *ri;
+ struct regulator_dev *rdev;
+
+ if (!init_data) {
+ dev_err(&pdev->dev, "No regulator init data\n");
+ return -ENXIO;
+ }
+
+ ri = aat2870_get_regulator(pdev->id);
+ if (!ri) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ return -EINVAL;
+ }
+ ri->pdev = pdev;
+
+ rdev = regulator_register(&ri->desc, &pdev->dev, init_data, ri);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register regulator %s\n",
+ ri->desc.name);
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static int __devexit aat2870_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+ return 0;
+}
+
+static struct platform_driver aat2870_regulator_driver = {
+ .driver = {
+ .name = "aat2870-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_regulator_probe,
+ .remove = __devexit_p(aat2870_regulator_remove),
+};
+
+static int __init aat2870_regulator_init(void)
+{
+ return platform_driver_register(&aat2870_regulator_driver);
+}
+subsys_initcall(aat2870_regulator_init);
+
+static void __exit aat2870_regulator_exit(void)
+{
+ platform_driver_unregister(&aat2870_regulator_driver);
+}
+module_exit(aat2870_regulator_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Regulator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0c9373b..3fde1ec 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -315,6 +315,13 @@ config BACKLIGHT_PCF50633
If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
enable its driver.

+config BACKLIGHT_AAT2870
+ bool "AnalogicTech AAT2870 Backlight"
+ depends on ( BACKLIGHT_CLASS_DEVICE = y ) && MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE

endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b9ca849..2a08271 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -36,4 +36,5 @@ obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
+obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o

diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
new file mode 100644
index 0000000..4952a61
--- /dev/null
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -0,0 +1,246 @@
+/*
+ * linux/drivers/video/backlight/aat2870_bl.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_bl_driver_data {
+ struct platform_device *pdev;
+ struct backlight_device *bd;
+
+ int channels;
+ int max_current;
+ int brightness; /* current brightness */
+};
+
+static inline int aat2870_brightness(struct aat2870_bl_driver_data *aat2870_bl,
+ int brightness)
+{
+ struct backlight_device *bd = aat2870_bl->bd;
+ int val;
+
+ val = brightness * aat2870_bl->max_current;
+ val /= bd->props.max_brightness;
+
+ return val;
+}
+
+static inline int aat2870_bl_enable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN,
+ (u8)aat2870_bl->channels);
+}
+
+static inline int aat2870_bl_disable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN, 0x0);
+}
+
+static int aat2870_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int aat2870_bl_update_status(struct backlight_device *bd)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = dev_get_drvdata(&bd->dev);
+ struct aat2870_data *aat2870 =
+ dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+ int brightness = bd->props.brightness;
+ int ret;
+
+ if ((brightness < 0) || (bd->props.max_brightness < brightness)) {
+ dev_err(&bd->dev, "invalid brightness, %d\n", brightness);
+ return -EINVAL;
+ }
+
+ dev_dbg(&bd->dev, "brightness=%d, power=%d, state=%d\n",
+ bd->props.brightness, bd->props.power, bd->props.state);
+
+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
+ (bd->props.state & BL_CORE_FBBLANK) ||
+ (bd->props.state & BL_CORE_SUSPENDED))
+ brightness = 0;
+
+ ret = aat2870->write(aat2870, AAT2870_BLM,
+ (u8)aat2870_brightness(aat2870_bl, brightness));
+ if (ret < 0)
+ return ret;
+
+ if (brightness == 0) {
+ ret = aat2870_bl_disable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ } else if (aat2870_bl->brightness == 0) {
+ ret = aat2870_bl_enable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ }
+
+ aat2870_bl->brightness = brightness;
+
+ return 0;
+}
+
+static int aat2870_bl_check_fb(struct backlight_device *bd, struct fb_info *fi)
+{
+ return 1;
+}
+
+static const struct backlight_ops aat2870_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .get_brightness = aat2870_bl_get_brightness,
+ .update_status = aat2870_bl_update_status,
+ .check_fb = aat2870_bl_check_fb,
+};
+
+static int aat2870_bl_probe(struct platform_device *pdev)
+{
+ struct aat2870_bl_platform_data *pdata = pdev->dev.platform_data;
+ struct aat2870_bl_driver_data *aat2870_bl;
+ struct backlight_device *bd;
+ struct backlight_properties props;
+ int ret = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data\n");
+ ret = -ENXIO;
+ goto out;
+ }
+
+ if (pdev->id != AAT2870_ID_BL) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ aat2870_bl = kzalloc(sizeof(struct aat2870_bl_driver_data), GFP_KERNEL);
+ if (!aat2870_bl) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for aat2870 backlight\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+
+ props.type = BACKLIGHT_RAW;
+ bd = backlight_device_register("aat2870-backlight", &pdev->dev,
+ aat2870_bl, &aat2870_bl_ops, &props);
+ if (!bd) {
+ dev_err(&pdev->dev,
+ "Failed allocate memory for backlight device\n");
+ ret = -ENOMEM;
+ goto out_kfree;
+ }
+
+ aat2870_bl->pdev = pdev;
+ platform_set_drvdata(pdev, aat2870_bl);
+
+ aat2870_bl->bd = bd;
+
+ if (pdata->channels > 0)
+ aat2870_bl->channels = pdata->channels;
+ else
+ aat2870_bl->channels = AAT2870_BL_CH_ALL;
+
+ if (pdata->max_brightness > 0)
+ aat2870_bl->max_current = pdata->max_current;
+ else
+ aat2870_bl->max_current = AAT2870_CURRENT_27_9;
+
+ if (pdata->max_brightness > 0)
+ bd->props.max_brightness = pdata->max_brightness;
+ else
+ bd->props.max_brightness = 255;
+
+ aat2870_bl->brightness = 0;
+ bd->props.power = FB_BLANK_UNBLANK;
+ bd->props.brightness = bd->props.max_brightness;
+
+ ret = aat2870_bl_update_status(bd);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to initialize\n");
+ goto out_bl_dev_unregister;
+ }
+
+ return 0;
+
+out_bl_dev_unregister:
+ backlight_device_unregister(bd);
+out_kfree:
+ kfree(aat2870_bl);
+out:
+ return ret;
+}
+
+static int aat2870_bl_remove(struct platform_device *pdev)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = platform_get_drvdata(pdev);
+ struct backlight_device *bd = aat2870_bl->bd;
+
+ bd->props.power = FB_BLANK_POWERDOWN;
+ bd->props.brightness = 0;
+ backlight_update_status(bd);
+
+ backlight_device_unregister(bd);
+ kfree(aat2870_bl);
+
+ return 0;
+}
+
+static struct platform_driver aat2870_bl_driver = {
+ .driver = {
+ .name = "aat2870-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_bl_probe,
+ .remove = aat2870_bl_remove,
+};
+
+static int __init aat2870_bl_init(void)
+{
+ return platform_driver_register(&aat2870_bl_driver);
+}
+subsys_initcall(aat2870_bl_init);
+
+static void __exit aat2870_bl_exit(void)
+{
+ platform_driver_unregister(&aat2870_bl_driver);
+}
+module_exit(aat2870_bl_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Backlight");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h
new file mode 100644
index 0000000..d34944e
--- /dev/null
+++ b/include/linux/mfd/aat2870.h
@@ -0,0 +1,182 @@
+/*
+ * linux/include/linux/mfd/aat2870.h
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_MFD_AAT2870_H
+#define __LINUX_MFD_AAT2870_H
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+
+/* Register offsets */
+#define AAT2870_BL_CH_EN 0x00
+#define AAT2870_BLM 0x01
+#define AAT2870_BLS 0x02
+#define AAT2870_BL1 0x03
+#define AAT2870_BL2 0x04
+#define AAT2870_BL3 0x05
+#define AAT2870_BL4 0x06
+#define AAT2870_BL5 0x07
+#define AAT2870_BL6 0x08
+#define AAT2870_BL7 0x09
+#define AAT2870_BL8 0x0A
+#define AAT2870_FLR 0x0B
+#define AAT2870_FM 0x0C
+#define AAT2870_FS 0x0D
+#define AAT2870_ALS_CFG0 0x0E
+#define AAT2870_ALS_CFG1 0x0F
+#define AAT2870_ALS_CFG2 0x10
+#define AAT2870_AMB 0x11
+#define AAT2870_ALS0 0x12
+#define AAT2870_ALS1 0x13
+#define AAT2870_ALS2 0x14
+#define AAT2870_ALS3 0x15
+#define AAT2870_ALS4 0x16
+#define AAT2870_ALS5 0x17
+#define AAT2870_ALS6 0x18
+#define AAT2870_ALS7 0x19
+#define AAT2870_ALS8 0x1A
+#define AAT2870_ALS9 0x1B
+#define AAT2870_ALSA 0x1C
+#define AAT2870_ALSB 0x1D
+#define AAT2870_ALSC 0x1E
+#define AAT2870_ALSD 0x1F
+#define AAT2870_ALSE 0x20
+#define AAT2870_ALSF 0x21
+#define AAT2870_SUB_SET 0x22
+#define AAT2870_SUB_CTRL 0x23
+#define AAT2870_LDO_AB 0x24
+#define AAT2870_LDO_CD 0x25
+#define AAT2870_LDO_EN 0x26
+#define AAT2870_REG_NUM 0x27
+
+/* Device IDs */
+enum aat2870_id {
+ AAT2870_ID_BL,
+ AAT2870_ID_LDOA,
+ AAT2870_ID_LDOB,
+ AAT2870_ID_LDOC,
+ AAT2870_ID_LDOD
+};
+
+/* Backlight channels */
+#define AAT2870_BL_CH1 0x01
+#define AAT2870_BL_CH2 0x02
+#define AAT2870_BL_CH3 0x04
+#define AAT2870_BL_CH4 0x08
+#define AAT2870_BL_CH5 0x10
+#define AAT2870_BL_CH6 0x20
+#define AAT2870_BL_CH7 0x40
+#define AAT2870_BL_CH8 0x80
+#define AAT2870_BL_CH_ALL 0xFF
+
+/* Backlight current magnitude (mA) */
+enum aat2870_current {
+ AAT2870_CURRENT_0_45,
+ AAT2870_CURRENT_0_90,
+ AAT2870_CURRENT_1_80,
+ AAT2870_CURRENT_2_70,
+ AAT2870_CURRENT_3_60,
+ AAT2870_CURRENT_4_50,
+ AAT2870_CURRENT_5_40,
+ AAT2870_CURRENT_6_30,
+ AAT2870_CURRENT_7_20,
+ AAT2870_CURRENT_8_10,
+ AAT2870_CURRENT_9_00,
+ AAT2870_CURRENT_9_90,
+ AAT2870_CURRENT_10_8,
+ AAT2870_CURRENT_11_7,
+ AAT2870_CURRENT_12_6,
+ AAT2870_CURRENT_13_5,
+ AAT2870_CURRENT_14_4,
+ AAT2870_CURRENT_15_3,
+ AAT2870_CURRENT_16_2,
+ AAT2870_CURRENT_17_1,
+ AAT2870_CURRENT_18_0,
+ AAT2870_CURRENT_18_9,
+ AAT2870_CURRENT_19_8,
+ AAT2870_CURRENT_20_7,
+ AAT2870_CURRENT_21_6,
+ AAT2870_CURRENT_22_5,
+ AAT2870_CURRENT_23_4,
+ AAT2870_CURRENT_24_3,
+ AAT2870_CURRENT_25_2,
+ AAT2870_CURRENT_26_1,
+ AAT2870_CURRENT_27_0,
+ AAT2870_CURRENT_27_9
+};
+
+struct aat2870_register {
+ bool readable;
+ bool writeable;
+ u8 value;
+};
+
+struct aat2870_data {
+ struct device *dev;
+ struct i2c_client *client;
+
+ struct mutex io_lock;
+ struct aat2870_register *reg_cache; /* register cache */
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+ bool is_enable;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+
+ /* i2c io funcntions */
+ int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
+ int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
+ int (*update_bits)(struct aat2870_data *aat2870, u8 addr, u8 mask,
+ u8 val);
+
+ /* for debugfs */
+ struct dentry *dentry_root;
+ struct dentry *dentry_reg;
+};
+
+struct aat2870_subdev_info {
+ int id;
+ const char *name;
+ void *platform_data;
+};
+
+struct aat2870_platform_data {
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+
+ struct aat2870_subdev_info *subdevs;
+ int num_subdevs;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+};
+
+struct aat2870_bl_platform_data {
+ /* backlight channels, default is AAT2870_BL_CH_ALL */
+ int channels;
+ /* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
+ int max_current;
+ /* maximum brightness, default is 255 */
+ int max_brightness;
+};
+
+#endif /* __LINUX_MFD_AAT2870_H */
--
1.7.1

2011-05-31 06:30:25

by Joe Perches

[permalink] [raw]
Subject: RE: [PATCH 1/1] aat2870: Adding backlight, regulator and mfd driver

On Tue, 2011-05-31 at 13:26 +0900, Jin Park wrote:
> Please review the driver.
> Adding backlight, regulator and mfd driver for AnalogicTech AAT2870.
> diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
> +++ b/drivers/regulator/aat2870-regulator.c
> @@ -0,0 +1,265 @@
> +/*
[]
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */X-NVConfidentiality: public

This stray "X-NVConfidentiality: public" should be removed.

2011-05-31 06:45:56

by Jinyoung Park

[permalink] [raw]
Subject: RE: [PATCH 1/1] aat2870: Adding backlight, regulator and mfd driver

Joe, thanks, that's my email editing mistake. :)

Samuel,
Re-sending the driver.
Please review the driver.

Thanks,
Jinyoung.


Adding backlight, regulator and mfd driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <[email protected]>
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 1 +
drivers/mfd/aat2870-core.c | 532 +++++++++++++++++++++++++++++++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/aat2870-regulator.c | 265 ++++++++++++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/aat2870_bl.c | 246 +++++++++++++++
include/linux/mfd/aat2870.h | 182 +++++++++++
10 files changed, 1252 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/aat2870-core.c
create mode 100644 drivers/regulator/aat2870-regulator.c
create mode 100644 drivers/video/backlight/aat2870_bl.c
create mode 100644 include/linux/mfd/aat2870.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0f09c05..6039ba2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -728,6 +728,16 @@ config MFD_TPS65910
if you say yes here you get support for the TPS65910 series of
Power Management chips.

+config MFD_AAT2870_CORE
+ bool "Support for the AnalogicTech AAT2870"
+ select MFD_CORE
+ depends on I2C=y && GPIOLIB
+ help
+ If you say yes here you get support for the AAT2870.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
endif # MFD_SUPPORT

menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index efe3cc3..498eb42 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -94,3 +94,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o
+obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
new file mode 100644
index 0000000..0d9687a
--- /dev/null
+++ b/drivers/mfd/aat2870-core.c
@@ -0,0 +1,532 @@
+/*
+ * linux/drivers/mfd/aat2870-core.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/aat2870.h>
+#include <linux/regulator/machine.h>
+
+static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = {
+ /* readable, writeable, value */
+ { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */
+ { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */
+ { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */
+ { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */
+ { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */
+ { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */
+ { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */
+ { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */
+ { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */
+ { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */
+ { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */
+ { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */
+ { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */
+ { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */
+ { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */
+ { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */
+ { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */
+ { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */
+ { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */
+ { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */
+ { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */
+ { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */
+ { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */
+ { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */
+ { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */
+ { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */
+ { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */
+ { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */
+ { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */
+ { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */
+ { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */
+ { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */
+ { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */
+ { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */
+ { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */
+ { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */
+ { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */
+ { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */
+ { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */
+};
+
+static struct mfd_cell aat2870_devs[] = {
+ {
+ .name = "aat2870-backlight",
+ .id = AAT2870_ID_BL,
+ .pdata_size = sizeof(struct aat2870_bl_platform_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOA,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOB,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOC,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+ {
+ .name = "aat2870-regulator",
+ .id = AAT2870_ID_LDOD,
+ .pdata_size = sizeof(struct regulator_init_data),
+ },
+};
+
+static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
+{
+ struct i2c_client *client = aat2870->client;
+ int ret = 0;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aat2870->io_lock);
+
+ if (!aat2870->reg_cache[addr].readable) {
+ *val = aat2870->reg_cache[addr].value;
+ goto out_unlock;
+ }
+
+ ret = i2c_master_send(client, &addr, 1);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 1) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ ret = i2c_master_recv(client, val, 1);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 1) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+ dev_dbg(&client->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val);
+
+ return ret;
+}
+
+static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
+{
+ struct i2c_client *client = aat2870->client;
+ u8 msg[2];
+ int ret = 0;
+
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
+ return -EINVAL;
+ }
+
+ if (!aat2870->reg_cache[addr].writeable) {
+ dev_err(aat2870->dev, "Address 0x%02x is not writeable\n",
+ addr);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aat2870->io_lock);
+
+ msg[0] = addr;
+ msg[1] = val;
+ ret = i2c_master_send(client, msg, 2);
+ if (ret < 0)
+ goto out_unlock;
+ if (ret != 2) {
+ ret = -EIO;
+ goto out_unlock;
+ }
+
+ aat2870->reg_cache[addr].value = val;
+ ret = 0;
+
+out_unlock:
+ mutex_unlock(&aat2870->io_lock);
+ dev_dbg(&client->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val);
+
+ return ret;
+}
+
+static int aat2870_update_bits(struct aat2870_data *aat2870, u8 addr,
+ u8 mask, u8 val)
+{
+ int change;
+ u8 old_val, new_val;
+ int ret;
+
+ ret = aat2870->read(aat2870, addr, &old_val);
+ if (ret)
+ return ret;
+
+ new_val = (old_val & ~mask) | val;
+ change = old_val != new_val;
+ if (change)
+ ret = aat2870->write(aat2870, addr, new_val);
+
+ dev_dbg(&aat2870->client->dev,
+ "update_bits: change=%d, addr=0x%02x, old=0x%02x, new=0x%02x\n",
+ change, addr, old_val, new_val);
+
+ return ret;
+}
+
+static inline void aat2870_enable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 1);
+
+ aat2870->is_enable = 1;
+}
+
+static inline void aat2870_disable(struct aat2870_data *aat2870)
+{
+ if (aat2870->en_pin >= 0)
+ gpio_set_value(aat2870->en_pin, 0);
+
+ aat2870->is_enable = 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
+{
+ u8 addr, val;
+ ssize_t count = 0;
+ int ret;
+
+ count += sprintf(buf, "aat2870 registers\n");
+ for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
+ count += sprintf(buf + count, "0x%02x: ", addr);
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ ret = aat2870->read(aat2870, addr, &val);
+ if (ret == 0)
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "0x%02x", val);
+ else
+ count += snprintf(buf + count, PAGE_SIZE - count,
+ "<read fail: %d>", ret);
+
+ if (count >= PAGE_SIZE - 1)
+ break;
+
+ count += snprintf(buf + count, PAGE_SIZE - count, "\n");
+ if (count >= PAGE_SIZE - 1)
+ break;
+ }
+
+ /* Truncate count; min() would cause a warning */
+ if (count >= PAGE_SIZE)
+ count = PAGE_SIZE - 1;
+
+ return count;
+}
+
+static int aat2870_reg_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char *buf;
+ ssize_t ret;
+
+ buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = aat2870_dump_reg(aat2870, buf);
+ if (ret >= 0)
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t aat2870_reg_write_file(struct file *file,
+ const char __user *user_buf, size_t count,
+ loff_t *ppos)
+{
+ struct aat2870_data *aat2870 = file->private_data;
+ char buf[32];
+ int buf_size;
+ char *start = buf;
+ unsigned long addr, val;
+ int ret;
+
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size)) {
+ dev_err(aat2870->dev, "Failed to copy from user\n");
+ return -EFAULT;
+ }
+ buf[buf_size] = 0;
+
+ while (*start == ' ')
+ start++;
+
+ addr = simple_strtoul(start, &start, 16);
+ if (addr >= AAT2870_REG_NUM) {
+ dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr);
+ return -EINVAL;
+ }
+
+ while (*start == ' ')
+ start++;
+
+ if (strict_strtoul(start, 16, &val))
+ return -EINVAL;
+
+ ret = aat2870->write(aat2870, (u8)addr, (u8)val);
+ if (ret)
+ return ret;
+
+ return buf_size;
+}
+
+static const struct file_operations aat2870_reg_fops = {
+ .open = aat2870_reg_open_file,
+ .read = aat2870_reg_read_file,
+ .write = aat2870_reg_write_file,
+};
+
+static void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+ aat2870->dentry_root = debugfs_create_dir("aat2870", NULL);
+ if (!aat2870->dentry_root) {
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs root directory\n");
+ return;
+ }
+
+ aat2870->dentry_reg = debugfs_create_file("regs", 0644,
+ aat2870->dentry_root,
+ aat2870, &aat2870_reg_fops);
+ if (!aat2870->dentry_reg)
+ dev_warn(aat2870->dev,
+ "Failed to create debugfs register file\n");
+}
+
+static void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+ debugfs_remove_recursive(aat2870->dentry_root);
+}
+#else
+static inline void aat2870_init_debugfs(struct aat2870_data *aat2870)
+{
+}
+
+static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
+{
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int aat2870_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct aat2870_platform_data *pdata = client->dev.platform_data;
+ struct aat2870_data *aat2870;
+ int i, j;
+ int ret = 0;
+
+ aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL);
+ if (!aat2870) {
+ dev_err(&client->dev,
+ "Failed to allocate memory for aat2870\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ aat2870->dev = &client->dev;
+ dev_set_drvdata(aat2870->dev, aat2870);
+
+ aat2870->client = client;
+ i2c_set_clientdata(client, aat2870);
+
+ aat2870->reg_cache = aat2870_regs;
+
+ if (pdata->en_pin < 0)
+ aat2870->en_pin = -1;
+ else
+ aat2870->en_pin = pdata->en_pin;
+
+ aat2870->init = pdata->init;
+ aat2870->uninit = pdata->uninit;
+ aat2870->read = aat2870_read;
+ aat2870->write = aat2870_write;
+ aat2870->update_bits = aat2870_update_bits;
+
+ mutex_init(&aat2870->io_lock);
+
+ if (aat2870->init)
+ aat2870->init(aat2870);
+
+ if (aat2870->en_pin >= 0) {
+ ret = gpio_request(aat2870->en_pin, "aat2870-en");
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Failed to request GPIO %d\n", aat2870->en_pin);
+ goto out_kfree;
+ }
+ gpio_direction_output(aat2870->en_pin, 1);
+ }
+
+ aat2870_enable(aat2870);
+
+ for (i = 0; i < pdata->num_subdevs; i++) {
+ for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) {
+ if ((pdata->subdevs[i].id == aat2870_devs[j].id) &&
+ !strcmp(pdata->subdevs[i].name,
+ aat2870_devs[j].name)) {
+ aat2870_devs[j].platform_data =
+ pdata->subdevs[i].platform_data;
+ break;
+ }
+ }
+ }
+
+ ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
+ ARRAY_SIZE(aat2870_devs), NULL, 0);
+ if (ret != 0) {
+ dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
+ goto out_disable;
+ }
+
+ aat2870_init_debugfs(aat2870);
+
+ return 0;
+
+out_disable:
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+out_kfree:
+ kfree(aat2870);
+out:
+ return ret;
+}
+
+static int aat2870_i2c_remove(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_uninit_debugfs(aat2870);
+
+ mfd_remove_devices(aat2870->dev);
+ aat2870_disable(aat2870);
+ if (aat2870->en_pin >= 0)
+ gpio_free(aat2870->en_pin);
+ if (aat2870->uninit)
+ aat2870->uninit(aat2870);
+ kfree(aat2870);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+
+ aat2870_disable(aat2870);
+
+ return 0;
+}
+
+static int aat2870_i2c_resume(struct i2c_client *client)
+{
+ struct aat2870_data *aat2870 = i2c_get_clientdata(client);
+ struct aat2870_register *reg = NULL;
+ int i;
+
+ aat2870_enable(aat2870);
+
+ /* restore registers */
+ for (i = 0; i < AAT2870_REG_NUM; i++) {
+ reg = &aat2870->reg_cache[i];
+ if (reg->writeable)
+ aat2870->write(aat2870, i, reg->value);
+ }
+
+ return 0;
+}
+#else
+#define aat2870_i2c_suspend NULL
+#define aat2870_i2c_resume NULL
+#endif /* CONFIG_PM */
+
+static struct i2c_device_id aat2870_i2c_id_table[] = {
+ { "aat2870", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table);
+
+static struct i2c_driver aat2870_i2c_driver = {
+ .driver = {
+ .name = "aat2870",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_i2c_probe,
+ .remove = aat2870_i2c_remove,
+ .suspend = aat2870_i2c_suspend,
+ .resume = aat2870_i2c_resume,
+ .id_table = aat2870_i2c_id_table,
+};
+
+static int __init aat2870_init(void)
+{
+ return i2c_add_driver(&aat2870_i2c_driver);
+}
+subsys_initcall(aat2870_init);
+
+static void __exit aat2870_exit(void)
+{
+ i2c_del_driver(&aat2870_i2c_driver);
+}
+module_exit(aat2870_exit);
+
+MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d7ed20f..0f37466 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -303,5 +303,12 @@ config REGULATOR_TPS65910
help
This driver supports TPS65910 voltage regulator chips.

+config REGULATOR_AAT2870
+ bool "AnalogicTech AAT2870 Regulators"
+ depends on MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ regulator driver.
+
endif

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3932d2e..8b8f3bc 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -43,5 +43,6 @@ obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
+obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o

ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
new file mode 100644
index 0000000..a26bcc9
--- /dev/null
+++ b/drivers/regulator/aat2870-regulator.c
@@ -0,0 +1,265 @@
+/*
+ * linux/drivers/regulator/aat2870-regulator.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_regulator {
+ struct platform_device *pdev;
+ struct regulator_desc desc;
+
+ const int *voltages; /* uV */
+
+ int min_uV;
+ int max_uV;
+
+ u8 enable_addr;
+ u8 enable_shift;
+ u8 enable_mask;
+
+ u8 voltage_addr;
+ u8 voltage_shift;
+ u8 voltage_mask;
+};
+
+static int aat2870_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+
+ return ri->voltages[selector];
+}
+
+static int aat2870_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV, unsigned *selector)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int uV;
+ int i;
+
+ if ((min_uV < ri->min_uV) || (max_uV > ri->max_uV)) {
+ dev_err(&rdev->dev,
+ "Invalid voltage, min %duV(>=%duV), max %duV(<=%duV)\n",
+ min_uV, ri->min_uV, max_uV, ri->max_uV);
+ return -EDOM;
+ }
+
+ for (i = 0; i < ri->desc.n_voltages; i++) {
+ uV = ri->voltages[i];
+ if ((min_uV <= uV) && (uV <= max_uV)) {
+ val = (i << ri->voltage_shift) & ri->voltage_mask;
+ break;
+ }
+ }
+
+ if (i >= ri->desc.n_voltages)
+ return -EINVAL;
+
+ *selector = i;
+
+ return aat2870->update_bits(aat2870, ri->voltage_addr,
+ ri->voltage_mask, val);
+}
+
+static int aat2870_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->voltage_addr, &val);
+ if (ret)
+ return ret;
+
+ val = (val & ri->voltage_mask) >> ri->voltage_shift;
+ if (val >= ri->desc.n_voltages)
+ return -EIO;
+
+ return ri->voltages[val];
+}
+
+static int aat2870_ldo_enable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update_bits(aat2870, ri->enable_addr,
+ ri->enable_mask, ri->enable_mask);
+}
+
+static int aat2870_ldo_disable(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+
+ return aat2870->update_bits(aat2870, ri->enable_addr,
+ ri->enable_mask, 0);
+}
+
+static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
+ struct aat2870_data *aat2870 = dev_get_drvdata(ri->pdev->dev.parent);
+ u8 val;
+ int ret;
+
+ ret = aat2870->read(aat2870, ri->enable_addr, &val);
+ if (ret)
+ return ret;
+
+ return val & ri->enable_mask ? 1 : 0;
+}
+
+static struct regulator_ops aat2870_ldo_ops = {
+ .list_voltage = aat2870_ldo_list_voltage,
+ .set_voltage = aat2870_ldo_set_voltage,
+ .get_voltage = aat2870_ldo_get_voltage,
+ .enable = aat2870_ldo_enable,
+ .disable = aat2870_ldo_disable,
+ .is_enabled = aat2870_ldo_is_enabled,
+};
+
+static const int aat2870_ldo_voltages[] = {
+ 1200000, 1300000, 1500000, 1600000,
+ 1800000, 2000000, 2200000, 2500000,
+ 2600000, 2700000, 2800000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
+};
+
+#define AAT2870_LDO(ids) \
+ { \
+ .desc = { \
+ .name = #ids, \
+ .id = AAT2870_ID_##ids, \
+ .n_voltages = ARRAY_SIZE(aat2870_ldo_voltages), \
+ .ops = &aat2870_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }, \
+ .voltages = aat2870_ldo_voltages, \
+ .min_uV = 1200000, \
+ .max_uV = 3300000, \
+ }
+
+static struct aat2870_regulator aat2870_regulators[] = {
+ AAT2870_LDO(LDOA),
+ AAT2870_LDO(LDOB),
+ AAT2870_LDO(LDOC),
+ AAT2870_LDO(LDOD),
+};
+
+static struct aat2870_regulator *aat2870_get_regulator(int id)
+{
+ struct aat2870_regulator *ri = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(aat2870_regulators); i++) {
+ ri = &aat2870_regulators[i];
+ if (ri->desc.id == id)
+ break;
+ }
+
+ if (!ri)
+ return NULL;
+
+ ri->enable_addr = AAT2870_LDO_EN;
+ ri->enable_shift = id - AAT2870_ID_LDOA;
+ ri->enable_mask = 0x1 << ri->enable_shift;
+
+ ri->voltage_addr = (id - AAT2870_ID_LDOA) / 2 ?
+ AAT2870_LDO_CD : AAT2870_LDO_AB;
+ ri->voltage_shift = (id - AAT2870_ID_LDOA) % 2 ? 0 : 4;
+ ri->voltage_mask = 0xF << ri->voltage_shift;
+
+ return ri;
+}
+
+static int aat2870_regulator_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *init_data = pdev->dev.platform_data;
+ struct aat2870_regulator *ri;
+ struct regulator_dev *rdev;
+
+ if (!init_data) {
+ dev_err(&pdev->dev, "No regulator init data\n");
+ return -ENXIO;
+ }
+
+ ri = aat2870_get_regulator(pdev->id);
+ if (!ri) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ return -EINVAL;
+ }
+ ri->pdev = pdev;
+
+ rdev = regulator_register(&ri->desc, &pdev->dev, init_data, ri);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "Failed to register regulator %s\n",
+ ri->desc.name);
+ return PTR_ERR(rdev);
+ }
+ platform_set_drvdata(pdev, rdev);
+
+ return 0;
+}
+
+static int __devexit aat2870_regulator_remove(struct platform_device *pdev)
+{
+ struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+ regulator_unregister(rdev);
+ return 0;
+}
+
+static struct platform_driver aat2870_regulator_driver = {
+ .driver = {
+ .name = "aat2870-regulator",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_regulator_probe,
+ .remove = __devexit_p(aat2870_regulator_remove),
+};
+
+static int __init aat2870_regulator_init(void)
+{
+ return platform_driver_register(&aat2870_regulator_driver);
+}
+subsys_initcall(aat2870_regulator_init);
+
+static void __exit aat2870_regulator_exit(void)
+{
+ platform_driver_unregister(&aat2870_regulator_driver);
+}
+module_exit(aat2870_regulator_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Regulator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 0c9373b..3fde1ec 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -315,6 +315,13 @@ config BACKLIGHT_PCF50633
If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
enable its driver.

+config BACKLIGHT_AAT2870
+ bool "AnalogicTech AAT2870 Backlight"
+ depends on ( BACKLIGHT_CLASS_DEVICE = y ) && MFD_AAT2870_CORE
+ help
+ If you have a AnalogicTech AAT2870 say Y to enable the
+ backlight driver.
+
endif # BACKLIGHT_CLASS_DEVICE

endif # BACKLIGHT_LCD_SUPPORT
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index b9ca849..2a08271 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -36,4 +36,5 @@ obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o
obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o
obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
+obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o

diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c
new file mode 100644
index 0000000..4952a61
--- /dev/null
+++ b/drivers/video/backlight/aat2870_bl.c
@@ -0,0 +1,246 @@
+/*
+ * linux/drivers/video/backlight/aat2870_bl.c
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/aat2870.h>
+
+struct aat2870_bl_driver_data {
+ struct platform_device *pdev;
+ struct backlight_device *bd;
+
+ int channels;
+ int max_current;
+ int brightness; /* current brightness */
+};
+
+static inline int aat2870_brightness(struct aat2870_bl_driver_data *aat2870_bl,
+ int brightness)
+{
+ struct backlight_device *bd = aat2870_bl->bd;
+ int val;
+
+ val = brightness * aat2870_bl->max_current;
+ val /= bd->props.max_brightness;
+
+ return val;
+}
+
+static inline int aat2870_bl_enable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN,
+ (u8)aat2870_bl->channels);
+}
+
+static inline int aat2870_bl_disable(struct aat2870_bl_driver_data *aat2870_bl)
+{
+ struct aat2870_data *aat2870
+ = dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+
+ return aat2870->write(aat2870, AAT2870_BL_CH_EN, 0x0);
+}
+
+static int aat2870_bl_get_brightness(struct backlight_device *bd)
+{
+ return bd->props.brightness;
+}
+
+static int aat2870_bl_update_status(struct backlight_device *bd)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = dev_get_drvdata(&bd->dev);
+ struct aat2870_data *aat2870 =
+ dev_get_drvdata(aat2870_bl->pdev->dev.parent);
+ int brightness = bd->props.brightness;
+ int ret;
+
+ if ((brightness < 0) || (bd->props.max_brightness < brightness)) {
+ dev_err(&bd->dev, "invalid brightness, %d\n", brightness);
+ return -EINVAL;
+ }
+
+ dev_dbg(&bd->dev, "brightness=%d, power=%d, state=%d\n",
+ bd->props.brightness, bd->props.power, bd->props.state);
+
+ if ((bd->props.power != FB_BLANK_UNBLANK) ||
+ (bd->props.state & BL_CORE_FBBLANK) ||
+ (bd->props.state & BL_CORE_SUSPENDED))
+ brightness = 0;
+
+ ret = aat2870->write(aat2870, AAT2870_BLM,
+ (u8)aat2870_brightness(aat2870_bl, brightness));
+ if (ret < 0)
+ return ret;
+
+ if (brightness == 0) {
+ ret = aat2870_bl_disable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ } else if (aat2870_bl->brightness == 0) {
+ ret = aat2870_bl_enable(aat2870_bl);
+ if (ret < 0)
+ return ret;
+ }
+
+ aat2870_bl->brightness = brightness;
+
+ return 0;
+}
+
+static int aat2870_bl_check_fb(struct backlight_device *bd, struct fb_info *fi)
+{
+ return 1;
+}
+
+static const struct backlight_ops aat2870_bl_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .get_brightness = aat2870_bl_get_brightness,
+ .update_status = aat2870_bl_update_status,
+ .check_fb = aat2870_bl_check_fb,
+};
+
+static int aat2870_bl_probe(struct platform_device *pdev)
+{
+ struct aat2870_bl_platform_data *pdata = pdev->dev.platform_data;
+ struct aat2870_bl_driver_data *aat2870_bl;
+ struct backlight_device *bd;
+ struct backlight_properties props;
+ int ret = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data\n");
+ ret = -ENXIO;
+ goto out;
+ }
+
+ if (pdev->id != AAT2870_ID_BL) {
+ dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ aat2870_bl = kzalloc(sizeof(struct aat2870_bl_driver_data), GFP_KERNEL);
+ if (!aat2870_bl) {
+ dev_err(&pdev->dev,
+ "Failed to allocate memory for aat2870 backlight\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+
+ props.type = BACKLIGHT_RAW;
+ bd = backlight_device_register("aat2870-backlight", &pdev->dev,
+ aat2870_bl, &aat2870_bl_ops, &props);
+ if (!bd) {
+ dev_err(&pdev->dev,
+ "Failed allocate memory for backlight device\n");
+ ret = -ENOMEM;
+ goto out_kfree;
+ }
+
+ aat2870_bl->pdev = pdev;
+ platform_set_drvdata(pdev, aat2870_bl);
+
+ aat2870_bl->bd = bd;
+
+ if (pdata->channels > 0)
+ aat2870_bl->channels = pdata->channels;
+ else
+ aat2870_bl->channels = AAT2870_BL_CH_ALL;
+
+ if (pdata->max_brightness > 0)
+ aat2870_bl->max_current = pdata->max_current;
+ else
+ aat2870_bl->max_current = AAT2870_CURRENT_27_9;
+
+ if (pdata->max_brightness > 0)
+ bd->props.max_brightness = pdata->max_brightness;
+ else
+ bd->props.max_brightness = 255;
+
+ aat2870_bl->brightness = 0;
+ bd->props.power = FB_BLANK_UNBLANK;
+ bd->props.brightness = bd->props.max_brightness;
+
+ ret = aat2870_bl_update_status(bd);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to initialize\n");
+ goto out_bl_dev_unregister;
+ }
+
+ return 0;
+
+out_bl_dev_unregister:
+ backlight_device_unregister(bd);
+out_kfree:
+ kfree(aat2870_bl);
+out:
+ return ret;
+}
+
+static int aat2870_bl_remove(struct platform_device *pdev)
+{
+ struct aat2870_bl_driver_data *aat2870_bl = platform_get_drvdata(pdev);
+ struct backlight_device *bd = aat2870_bl->bd;
+
+ bd->props.power = FB_BLANK_POWERDOWN;
+ bd->props.brightness = 0;
+ backlight_update_status(bd);
+
+ backlight_device_unregister(bd);
+ kfree(aat2870_bl);
+
+ return 0;
+}
+
+static struct platform_driver aat2870_bl_driver = {
+ .driver = {
+ .name = "aat2870-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = aat2870_bl_probe,
+ .remove = aat2870_bl_remove,
+};
+
+static int __init aat2870_bl_init(void)
+{
+ return platform_driver_register(&aat2870_bl_driver);
+}
+subsys_initcall(aat2870_bl_init);
+
+static void __exit aat2870_bl_exit(void)
+{
+ platform_driver_unregister(&aat2870_bl_driver);
+}
+module_exit(aat2870_bl_exit);
+
+MODULE_DESCRIPTION("AnalogicTech AAT2870 Backlight");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jin Park <[email protected]>");
diff --git a/include/linux/mfd/aat2870.h b/include/linux/mfd/aat2870.h
new file mode 100644
index 0000000..d34944e
--- /dev/null
+++ b/include/linux/mfd/aat2870.h
@@ -0,0 +1,182 @@
+/*
+ * linux/include/linux/mfd/aat2870.h
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ * Author: Jin Park <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_MFD_AAT2870_H
+#define __LINUX_MFD_AAT2870_H
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+
+/* Register offsets */
+#define AAT2870_BL_CH_EN 0x00
+#define AAT2870_BLM 0x01
+#define AAT2870_BLS 0x02
+#define AAT2870_BL1 0x03
+#define AAT2870_BL2 0x04
+#define AAT2870_BL3 0x05
+#define AAT2870_BL4 0x06
+#define AAT2870_BL5 0x07
+#define AAT2870_BL6 0x08
+#define AAT2870_BL7 0x09
+#define AAT2870_BL8 0x0A
+#define AAT2870_FLR 0x0B
+#define AAT2870_FM 0x0C
+#define AAT2870_FS 0x0D
+#define AAT2870_ALS_CFG0 0x0E
+#define AAT2870_ALS_CFG1 0x0F
+#define AAT2870_ALS_CFG2 0x10
+#define AAT2870_AMB 0x11
+#define AAT2870_ALS0 0x12
+#define AAT2870_ALS1 0x13
+#define AAT2870_ALS2 0x14
+#define AAT2870_ALS3 0x15
+#define AAT2870_ALS4 0x16
+#define AAT2870_ALS5 0x17
+#define AAT2870_ALS6 0x18
+#define AAT2870_ALS7 0x19
+#define AAT2870_ALS8 0x1A
+#define AAT2870_ALS9 0x1B
+#define AAT2870_ALSA 0x1C
+#define AAT2870_ALSB 0x1D
+#define AAT2870_ALSC 0x1E
+#define AAT2870_ALSD 0x1F
+#define AAT2870_ALSE 0x20
+#define AAT2870_ALSF 0x21
+#define AAT2870_SUB_SET 0x22
+#define AAT2870_SUB_CTRL 0x23
+#define AAT2870_LDO_AB 0x24
+#define AAT2870_LDO_CD 0x25
+#define AAT2870_LDO_EN 0x26
+#define AAT2870_REG_NUM 0x27
+
+/* Device IDs */
+enum aat2870_id {
+ AAT2870_ID_BL,
+ AAT2870_ID_LDOA,
+ AAT2870_ID_LDOB,
+ AAT2870_ID_LDOC,
+ AAT2870_ID_LDOD
+};
+
+/* Backlight channels */
+#define AAT2870_BL_CH1 0x01
+#define AAT2870_BL_CH2 0x02
+#define AAT2870_BL_CH3 0x04
+#define AAT2870_BL_CH4 0x08
+#define AAT2870_BL_CH5 0x10
+#define AAT2870_BL_CH6 0x20
+#define AAT2870_BL_CH7 0x40
+#define AAT2870_BL_CH8 0x80
+#define AAT2870_BL_CH_ALL 0xFF
+
+/* Backlight current magnitude (mA) */
+enum aat2870_current {
+ AAT2870_CURRENT_0_45,
+ AAT2870_CURRENT_0_90,
+ AAT2870_CURRENT_1_80,
+ AAT2870_CURRENT_2_70,
+ AAT2870_CURRENT_3_60,
+ AAT2870_CURRENT_4_50,
+ AAT2870_CURRENT_5_40,
+ AAT2870_CURRENT_6_30,
+ AAT2870_CURRENT_7_20,
+ AAT2870_CURRENT_8_10,
+ AAT2870_CURRENT_9_00,
+ AAT2870_CURRENT_9_90,
+ AAT2870_CURRENT_10_8,
+ AAT2870_CURRENT_11_7,
+ AAT2870_CURRENT_12_6,
+ AAT2870_CURRENT_13_5,
+ AAT2870_CURRENT_14_4,
+ AAT2870_CURRENT_15_3,
+ AAT2870_CURRENT_16_2,
+ AAT2870_CURRENT_17_1,
+ AAT2870_CURRENT_18_0,
+ AAT2870_CURRENT_18_9,
+ AAT2870_CURRENT_19_8,
+ AAT2870_CURRENT_20_7,
+ AAT2870_CURRENT_21_6,
+ AAT2870_CURRENT_22_5,
+ AAT2870_CURRENT_23_4,
+ AAT2870_CURRENT_24_3,
+ AAT2870_CURRENT_25_2,
+ AAT2870_CURRENT_26_1,
+ AAT2870_CURRENT_27_0,
+ AAT2870_CURRENT_27_9
+};
+
+struct aat2870_register {
+ bool readable;
+ bool writeable;
+ u8 value;
+};
+
+struct aat2870_data {
+ struct device *dev;
+ struct i2c_client *client;
+
+ struct mutex io_lock;
+ struct aat2870_register *reg_cache; /* register cache */
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+ bool is_enable;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+
+ /* i2c io funcntions */
+ int (*read)(struct aat2870_data *aat2870, u8 addr, u8 *val);
+ int (*write)(struct aat2870_data *aat2870, u8 addr, u8 val);
+ int (*update_bits)(struct aat2870_data *aat2870, u8 addr, u8 mask,
+ u8 val);
+
+ /* for debugfs */
+ struct dentry *dentry_root;
+ struct dentry *dentry_reg;
+};
+
+struct aat2870_subdev_info {
+ int id;
+ const char *name;
+ void *platform_data;
+};
+
+struct aat2870_platform_data {
+ int en_pin; /* enable GPIO pin (if < 0, ignore this value) */
+
+ struct aat2870_subdev_info *subdevs;
+ int num_subdevs;
+
+ /* init and uninit for platform specified */
+ int (*init)(struct aat2870_data *aat2870);
+ void (*uninit)(struct aat2870_data *aat2870);
+};
+
+struct aat2870_bl_platform_data {
+ /* backlight channels, default is AAT2870_BL_CH_ALL */
+ int channels;
+ /* backlight current magnitude, default is AAT2870_CURRENT_27_9 */
+ int max_current;
+ /* maximum brightness, default is 255 */
+ int max_brightness;
+};
+
+#endif /* __LINUX_MFD_AAT2870_H */
--
1.7.1

2011-06-20 10:29:49

by Samuel Ortiz

[permalink] [raw]
Subject: Re: [PATCH 1/1] aat2870: Adding backlight, regulator and mfd driver

Hi Jin,

On Mon, May 30, 2011 at 05:17:32PM +0900, Jin Park wrote:
> Adding backlight, regulator and mfd driver for AnalogicTech AAT2870.
Before reviewing this patch, could you please do the following:

1) Split it into 3 actual patches: the MFD one, the regulator one and the
backlight one.
2) Add the relevant maintainers (See MAINTAINERS) if you want to get a proper
regulator and backlight driver review.

Now, some MFD specific comments:

> +static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
> +{
> + struct i2c_client *client = aat2870->client;
> + int ret = 0;
> +
> + if (addr >= AAT2870_REG_NUM) {
> + dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
> + return -EINVAL;
> + }
> +
> + mutex_lock(&aat2870->io_lock);
> +
> + if (!aat2870->reg_cache[addr].readable) {
> + *val = aat2870->reg_cache[addr].value;
> + goto out_unlock;
> + }
> +
> + ret = i2c_master_send(client, &addr, 1);
> + if (ret < 0)
> + goto out_unlock;
> + if (ret != 1) {
> + ret = -EIO;
> + goto out_unlock;
> + }
> +
> + ret = i2c_master_recv(client, val, 1);
> + if (ret < 0)
> + goto out_unlock;
> + if (ret != 1) {
> + ret = -EIO;
> + goto out_unlock;
> + }
> +
> + ret = 0;
> +
> +out_unlock:
> + mutex_unlock(&aat2870->io_lock);
> + dev_dbg(&client->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val);
> +
> + return ret;
> +}
> +
> +static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
> +{
> + struct i2c_client *client = aat2870->client;
> + u8 msg[2];
> + int ret = 0;
> +
> + if (addr >= AAT2870_REG_NUM) {
> + dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
> + return -EINVAL;
> + }
> +
> + if (!aat2870->reg_cache[addr].writeable) {
> + dev_err(aat2870->dev, "Address 0x%02x is not writeable\n",
> + addr);
> + return -EINVAL;
> + }
> +
> + mutex_lock(&aat2870->io_lock);
> +
> + msg[0] = addr;
> + msg[1] = val;
> + ret = i2c_master_send(client, msg, 2);
> + if (ret < 0)
> + goto out_unlock;
> + if (ret != 2) {
> + ret = -EIO;
> + goto out_unlock;
> + }
> +
> + aat2870->reg_cache[addr].value = val;
> + ret = 0;
> +
> +out_unlock:
> + mutex_unlock(&aat2870->io_lock);
> + dev_dbg(&client->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val);
> +
> + return ret;
> +}
> +
> +static int aat2870_update_bits(struct aat2870_data *aat2870, u8 addr,
> + u8 mask, u8 val)
> +{
> + int change;
> + u8 old_val, new_val;
> + int ret;
> +
> + ret = aat2870->read(aat2870, addr, &old_val);
> + if (ret)
> + return ret;
> +
> + new_val = (old_val & ~mask) | val;
> + change = old_val != new_val;
> + if (change)
> + ret = aat2870->write(aat2870, addr, new_val);
> +
> + dev_dbg(&aat2870->client->dev,
> + "update_bits: change=%d, addr=0x%02x, old=0x%02x, new=0x%02x\n",
> + change, addr, old_val, new_val);
> +
> + return ret;
> +}
You also need to take the io_lock mutex here, to prevent someone else to write
a different value to your register between your read and write.
So what you typically want is an unlocked version of aat2870_[read|write]
(let's say we call it __aat2870_[read|write]). Then your aat2870_[read|write]
become wrappers around the __aat2870_[read|write] with the lock taken. And
your update_bits routine can use __aat2870_[read|write] with the lock taken
from the beginning.

The rest looks pretty fine to me.

Cheers,
Samuel.

--
Intel Open Source Technology Centre
http://oss.intel.com/