2011-06-23 06:30:01

by Justin P. Mattock

[permalink] [raw]
Subject: [PATCH 1/3]Fix typo interrupt(s) to interrupt(s)

From: "Justin P. Mattock" <[email protected]>

The patch below fixes some typos interrrupt to interrupt.
Note I sent something similar a few months ago, either this was the same or
newly created typos have been created.

Signed-off-by: Justin P. Mattock <[email protected]>

---
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +-
drivers/net/arm/ks8695net.c | 2 +-
drivers/net/atlx/atl1.c | 2 +-
drivers/net/sky2.c | 2 +-
drivers/net/wireless/rtlwifi/pci.c | 2 +-
drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++--
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +-
drivers/tty/serial/mrst_max3110.c | 2 +-
drivers/usb/gadget/langwell_udc.c | 2 +-
drivers/usb/musb/musb_gadget.c | 2 +-
11 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index fb7dc52..8b6da75 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e..f1eebca 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
}

/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index a7b0caa..47e7be6 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -412,7 +412,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index cd5789f..ab1d8a4 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);

if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3ee41da..a04c56e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1973,7 +1973,7 @@ static void sky2_hw_down(struct sky2_port *sky2)

sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);

- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9f8ccae..52cd981 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -1573,7 +1573,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;

/*
- *should before disable interrrupt&adapter
+ *should before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index 830822f..f7ce399 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -390,10 +390,10 @@ static void ft1000_reset_asic(struct net_device *dev)
}
mdelay(1);
if (info->AsicID == ELECTRABUZZ_ID) {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff);
} else {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff);
}
// clear interrupts
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index b0a4211..d3642a2 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev)

mdelay(1);

- /* set watermark to -1 in order to not generate an interrrupt */
+ /* set watermark to -1 in order to not generate an interrupt */
ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);

/* clear interrupts */
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 1bd2845..e829ac2 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/

diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 9cee88a..8d6ca5e 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2968,7 +2968,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}

- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0a50a35..e30d56d 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
--
1.7.5.4


2011-06-23 06:30:04

by Justin P. Mattock

[permalink] [raw]
Subject: [PATCH 2/3]drivers:input:serio:libps2.c Fix typo arrrives.

From: "Justin P. Mattock" <[email protected]>

Fix a typo in a comment.

Signed-off-by: Justin P. Mattock <[email protected]>

---
drivers/input/serio/libps2.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index 980af94..07a8363 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -210,7 +210,7 @@ int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
/*
* Some devices (Synaptics) peform the reset before
* ACKing the reset command, and so it can take a long
- * time before the ACK arrrives.
+ * time before the ACK arrives.
*/
if (ps2_sendbyte(ps2dev, command & 0xff,
command == PS2_CMD_RESET_BAT ? 1000 : 200))
--
1.7.5.4

2011-06-23 06:30:09

by Justin P. Mattock

[permalink] [raw]
Subject: [PATCH 3/3]drivers:ata:sata_dwc_460ex.c Fix typo corrresponding.

From: "Justin P. Mattock" <[email protected]>

The patch below fixes a typo.

Signed-off-by: Justin P. Mattock <[email protected]>

---
drivers/ata/sata_dwc_460ex.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 1c4b3aa..dc88a39 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf)
/*
* Function: get_burst_length_encode
* arguments: datalength: length in bytes of data
- * returns value to be programmed in register corrresponding to data length
+ * returns value to be programmed in register corresponding to data length
* This value is effectively the log(base 2) of the length
*/
static int get_burst_length_encode(int datalength)
--
1.7.5.4

2011-06-23 17:13:07

by Vitaliy Ivanov

[permalink] [raw]
Subject: Re: [PATCH 1/3]Fix typo interrupt(s) to interrupt(s)

Jiri/Justin,

On Wed, 2011-06-22 at 23:29 -0700, Justin P. Mattock wrote:
> From: "Justin P. Mattock" <[email protected]>
>
> The patch below fixes some typos interrrupt to interrupt.
> Note I sent something similar a few months ago, either this was the same or
> newly created typos have been created.
>
> Signed-off-by: Justin P. Mattock <[email protected]>
>
> ---
> arch/arm/mach-omap2/smartreflex.c | 2 +-
> arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +-
> drivers/net/arm/ks8695net.c | 2 +-
> drivers/net/atlx/atl1.c | 2 +-
> drivers/net/sky2.c | 2 +-
> drivers/net/wireless/rtlwifi/pci.c | 2 +-
> drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++--
> drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +-
> drivers/tty/serial/mrst_max3110.c | 2 +-
> drivers/usb/gadget/langwell_udc.c | 2 +-
> drivers/usb/musb/musb_gadget.c | 2 +-
> 11 files changed, 12 insertions(+), 12 deletions(-)

I actually can see this problem in 14 files:

grep -lir interrrupt *|wc -l
14

So, here is my changes with correcting all the possible problems with 'interrrupt' word.
Jiri, that's candidate to your tree.

---
>From 61541fe72b5906ca3635ee8e4914ac16708dc57c Mon Sep 17 00:00:00 2001
From: Vitaliy Ivanov <[email protected]>
Date: Thu, 23 Jun 2011 20:01:55 +0300
Subject: [PATCH] treewide: typo 'interrrupt' word corrections.

Signed-off-by: Justin P. Mattock <[email protected]>
Signed-off-by: Vitaliy Ivanov <[email protected]>
---
arch/arm/mach-omap2/smartreflex.c | 2 +-
arch/powerpc/platforms/embedded6xx/storcenter.c | 2 +-
drivers/net/arm/ks8695net.c | 2 +-
drivers/net/atlx/atl1.c | 2 +-
drivers/net/bnx2.h | 12 ++++++------
drivers/net/sky2.c | 2 +-
drivers/net/wireless/rtlwifi/pci.c | 6 +++---
drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 4 ++--
drivers/staging/ft1000/ft1000-usb/ft1000_hw.c | 2 +-
.../astoria/include/linux/westbridge/cyasstorage.h | 2 +-
drivers/tty/serial/mrst_max3110.c | 2 +-
drivers/usb/gadget/langwell_udc.c | 2 +-
drivers/usb/gadget/net2280.c | 2 +-
drivers/usb/musb/musb_gadget.c | 2 +-
14 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index fb7dc52..8b6da75 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
* driver register and sr device intializtion API's. Only one call
* will ultimately succeed.
*
- * Currently this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrupt handler for a particular SR
* if smartreflex class driver is already registered and has
* requested for interrupts and the SR interrupt line in present.
*/
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
index 613070e..f1eebca 100644
--- a/arch/powerpc/platforms/embedded6xx/storcenter.c
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -77,7 +77,7 @@ static void __init storcenter_setup_arch(void)
}

/*
- * Interrupt setup and service. Interrrupts on the turbostation come
+ * Interrupt setup and service. Interrupts on the turbostation come
* from the four PCI slots plus onboard 8241 devices: I2C, DUART.
*/
static void __init storcenter_init_IRQ(void)
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index a7b0caa..47e7be6 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -412,7 +412,7 @@ ks8695_tx_irq(int irq, void *dev_id)
* Interrupt Status Register (Offset 0xF208)
* Bit29: WAN MAC Receive Status
* Bit16: LAN MAC Receive Status
- * So, this Rx interrrupt enable/status bit number is equal
+ * So, this Rx interrupt enable/status bit number is equal
* as Rx IRQ number.
*/
static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index cd5789f..ab1d8a4 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -858,7 +858,7 @@ static s32 atl1_init_hw(struct atl1_hw *hw)
atl1_init_flash_opcode(hw);

if (!hw->phy_configured) {
- /* enable GPHY LinkChange Interrrupt */
+ /* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index bf371f6..c39c770 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -5617,7 +5617,7 @@ struct l2_fhdr {
#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5712,7 +5712,7 @@ struct l2_fhdr {
#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_TPAT_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5807,7 +5807,7 @@ struct l2_fhdr {
#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_RXP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -5953,7 +5953,7 @@ struct l2_fhdr {
#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_COM_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6119,7 +6119,7 @@ struct l2_fhdr {
#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_CP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31)
@@ -6291,7 +6291,7 @@ struct l2_fhdr {
#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8)
#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10)
#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11)
-#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12)
+#define BNX2_MCP_CPU_STATE_INTERRUPT (1L<<12)
#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14)
#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15)
#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3ee41da..a04c56e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1973,7 +1973,7 @@ static void sky2_hw_down(struct sky2_port *sky2)

sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);

- /* Force any delayed status interrrupt and NAPI */
+ /* Force any delayed status interrupt and NAPI */
sky2_write32(hw, STAT_LEV_TIMER_CNT, 0);
sky2_write32(hw, STAT_TX_TIMER_CNT, 0);
sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9f8ccae..6d827d2 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -488,7 +488,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw)
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct sk_buff *skb = NULL;
struct ieee80211_tx_info *info = NULL;
- int tid; /* should be int */
+ int tid;

if (!rtlpriv->rtlhal.earlymode_enable)
return;
@@ -1552,7 +1552,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw)

rtl_init_rx_config(hw);

- /*should after adapter start and interrupt enable. */
+ /*should be after adapter start and interrupt enable. */
set_hal_start(rtlhal);

RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
@@ -1573,7 +1573,7 @@ static void rtl_pci_stop(struct ieee80211_hw *hw)
u8 RFInProgressTimeOut = 0;

/*
- *should before disable interrrupt&adapter
+ *should be before disable interrupt&adapter
*and will do it immediately.
*/
set_hal_stop(rtlhal);
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index 830822f..f7ce399 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -390,10 +390,10 @@ static void ft1000_reset_asic(struct net_device *dev)
}
mdelay(1);
if (info->AsicID == ELECTRABUZZ_ID) {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_WATERMARK, 0xffff);
} else {
- // set watermark to -1 in order to not generate an interrrupt
+ // set watermark to -1 in order to not generate an interrupt
ft1000_write_reg(dev, FT1000_REG_MAG_WATERMARK, 0xffff);
}
// clear interrupts
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index b0a4211..d3642a2 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -601,7 +601,7 @@ static void ft1000_reset_asic(struct net_device *dev)

mdelay(1);

- /* set watermark to -1 in order to not generate an interrrupt */
+ /* set watermark to -1 in order to not generate an interrupt */
ft1000_write_register(ft1000dev, 0xffff, FT1000_REG_MAG_WATERMARK);

/* clear interrupts */
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
index 52b93c3..136a5b1 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
@@ -297,7 +297,7 @@ typedef enum cy_as_storage_event {
cy_as_storage_inserted,

/* This event occurs when the West Bridge device
- * percieves an interrrupt from an SDIO card */
+ * percieves an interrupt from an SDIO card */
cy_as_sdio_interrupt

} cy_as_storage_event;
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 1bd2845..e829ac2 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
* 1 word. If SPI master controller doesn't support sclk frequency change,
* then the char need be sent out one by one with some delay
*
- * 2. Currently only RX available interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrupt is used, no need for waiting TXE
* interrupt for a low speed UART device
*/

diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 9cee88a..8d6ca5e 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2968,7 +2968,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
handle_port_change(dev);
}

- /* suspend interrrupt */
+ /* suspend interrupt */
if (irq_sts & STS_SLI) {
dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 476d88e..534d915 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2534,7 +2534,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);

/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
- * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+ * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
* both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
* only indicates a change in the reset state).
*/
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0a50a35..e30d56d 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* most these gadgets, end of is signified either by a short packet,
* or filling the last byte of the buffer. (Sending extra data in
* that last pckate should trigger an overflow fault.) But in mode 1,
- * we don't get DMA completion interrrupt for short packets.
+ * we don't get DMA completion interrupt for short packets.
*
* Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
* to get endpoint interrupt on every DMA req, but that didn't seem
--
1.7.0.4


2011-06-23 17:16:52

by Vitaliy Ivanov

[permalink] [raw]
Subject: Re: [PATCH 3/3]drivers:ata:sata_dwc_460ex.c Fix typo corrresponding.

On Wed, 2011-06-22 at 23:29 -0700, Justin P. Mattock wrote:
> From: "Justin P. Mattock" <[email protected]>
>
> The patch below fixes a typo.
>
> Signed-off-by: Justin P. Mattock <[email protected]>
>
> ---
> drivers/ata/sata_dwc_460ex.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
> index 1c4b3aa..dc88a39 100644
> --- a/drivers/ata/sata_dwc_460ex.c
> +++ b/drivers/ata/sata_dwc_460ex.c
> @@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf)
> /*
> * Function: get_burst_length_encode
> * arguments: datalength: length in bytes of data
> - * returns value to be programmed in register corrresponding to data length
> + * returns value to be programmed in register corresponding to data length
> * This value is effectively the log(base 2) of the length
> */
> static int get_burst_length_encode(int datalength)

Two other patches are OK.

Acked-by: Vitaliy Ivanov <[email protected]>