Hello Dominik,
This small patchset gives to the user the ability to build cpupower
tool even if the source code is stored in a read-only location.
Patches #1 and #2 are just minor cleanup in order to ease patch #3
which adds the functionnality.
Please consider.
Franck Bui-Huu (3):
cpupower tool: remove use of undefined variables from the clean target of the top makefile
cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target
cpupower tool: allow to build in a separate directory
tools/power/cpupower/Makefile | 93 +++++++++++++++++++++-------------
tools/power/cpupower/bench/Makefile | 23 ++++++---
2 files changed, 72 insertions(+), 44 deletions(-)
--
1.7.7.4
Use the '-p' and '-o' switches to specify the pathname of the output
file to xgettext(1). This avoids to move manually the output file if
xgettext(1) succeeds.
Signed-off-by: Franck Bui-Huu <[email protected]>
---
tools/power/cpupower/Makefile | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index b7d87af..f1fe491 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -199,9 +199,7 @@ cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ)
po/$(PACKAGE).pot: $(UTIL_SRC)
$(ECHO) " GETTEXT " $@
$(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \
- --keyword=_ --keyword=N_ $(UTIL_SRC) && \
- test -f $(PACKAGE).po && \
- mv -f $(PACKAGE).po po/$(PACKAGE).pot
+ --keyword=_ --keyword=N_ $(UTIL_SRC) -p $(@D) -o $(@F)
po/%.gmo: po/%.po
$(ECHO) " MSGFMT " $@
--
1.7.7.4
UTIL_BINS and IDLE_OBJS variables are not defined at all, so
there's no need to remove their content from the 'clean' target.
Signed-off-by: Franck Bui-Huu <[email protected]>
---
tools/power/cpupower/Makefile | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index e8a03ac..b7d87af 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -228,8 +228,6 @@ compile-bench: libcpupower.so.$(LIB_MAJ)
clean:
-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
| xargs rm -f
- -rm -f $(UTIL_BINS)
- -rm -f $(IDLE_OBJS)
-rm -f cpupower
-rm -f libcpupower.so*
-rm -rf po/*.gmo po/*.pot
--
1.7.7.4
This patch allows cpupower tool to generate its output files in a
seperate directory. This is now possible by passing the 'O=<path>' to
the command line.
This can be usefull for a normal user if the kernel source code is
located a in read only location.
This is patch stole some bits of the perf makefile.
Signed-off-by: Franck Bui-Huu <[email protected]>
---
tools/power/cpupower/Makefile | 87 ++++++++++++++++++++++------------
tools/power/cpupower/bench/Makefile | 23 ++++++---
2 files changed, 71 insertions(+), 39 deletions(-)
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index f1fe491..9b7725a 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -19,6 +19,16 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
+OUTPUT=./
+ifeq ("$(origin O)", "command line")
+ OUTPUT := $(O)/
+endif
+
+ifneq ($(OUTPUT),)
+# check that the output directory actually exists
+OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
+$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
+endif
# --- CONFIGURATION BEGIN ---
@@ -87,6 +97,7 @@ AR = $(CROSS)ar
STRIP = $(CROSS)strip
RANLIB = $(CROSS)ranlib
HOSTCC = gcc
+MKDIR = mkdir
# Now we set up the build system
@@ -95,7 +106,7 @@ HOSTCC = gcc
# set up PWD so that older versions of make will work with our build.
PWD = $(shell pwd)
-GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo po/$$HLANG.gmo; done;}
+GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo $(OUTPUT)po/$$HLANG.gmo; done;}
export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS
@@ -122,15 +133,18 @@ UTIL_OBJS = utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \
utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o
+UTIL_SRC := $(UTIL_OBJS:.o=.c)
+
+UTIL_OBJS := $(addprefix $(OUTPUT),$(UTIL_OBJS))
+
UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
utils/helpers/bitmask.h \
utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
-UTIL_SRC := $(UTIL_OBJS:.o=.c)
-
LIB_HEADERS = lib/cpufreq.h lib/sysfs.h
LIB_SRC = lib/cpufreq.c lib/sysfs.c
LIB_OBJS = lib/cpufreq.o lib/sysfs.o
+LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS))
CFLAGS += -pipe
@@ -168,79 +182,90 @@ endif
# the actual make rules
-all: libcpupower cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
+all: libcpupower $(OUTPUT)cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
-lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
+$(OUTPUT)lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c
-libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
+$(OUTPUT)libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
$(ECHO) " LD " $@
$(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \
-Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS)
- @ln -sf $@ libcpupower.so
- @ln -sf $@ libcpupower.so.$(LIB_MIN)
+ @ln -sf $(@F) $(OUTPUT)libcpupower.so
+ @ln -sf $(@F) $(OUTPUT)libcpupower.so.$(LIB_MIN)
-libcpupower: libcpupower.so.$(LIB_MAJ)
+libcpupower: $(OUTPUT)libcpupower.so.$(LIB_MAJ)
# Let all .o files depend on its .c file and all headers
# Might be worth to put this into utils/Makefile at some point of time
$(UTIL_OBJS): $(UTIL_HEADERS)
-.c.o:
+$(OUTPUT)%.o: %.c
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c
-cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ)
+$(OUTPUT)cpupower: $(UTIL_OBJS) $(OUTPUT)libcpupower.so.$(LIB_MAJ)
$(ECHO) " CC " $@
- $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L. -o $@ $(UTIL_OBJS)
+ $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L$(OUTPUT) -o $@ $(UTIL_OBJS)
$(QUIET) $(STRIPCMD) $@
-po/$(PACKAGE).pot: $(UTIL_SRC)
+$(OUTPUT)po/$(PACKAGE).pot: $(UTIL_SRC)
$(ECHO) " GETTEXT " $@
$(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \
--keyword=_ --keyword=N_ $(UTIL_SRC) -p $(@D) -o $(@F)
-po/%.gmo: po/%.po
+$(OUTPUT)po/%.gmo: po/%.po
$(ECHO) " MSGFMT " $@
$(QUIET) msgfmt -o $@ po/$*.po
create-gmo: ${GMO_FILES}
-update-po: po/$(PACKAGE).pot
+update-po: $(OUTPUT)po/$(PACKAGE).pot
$(ECHO) " MSGMRG " $@
$(QUIET) @for HLANG in $(LANGUAGES); do \
echo -n "Updating $$HLANG "; \
- if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \
- po/$$HLANG.new.po; then \
- mv -f po/$$HLANG.new.po po/$$HLANG.po; \
+ if msgmerge po/$$HLANG.po $< -o \
+ $(OUTPUT)po/$$HLANG.new.po; then \
+ mv -f $(OUTPUT)po/$$HLANG.new.po $(OUTPUT)po/$$HLANG.po; \
else \
echo "msgmerge for $$HLANG failed!"; \
- rm -f po/$$HLANG.new.po; \
+ rm -f $(OUTPUT)po/$$HLANG.new.po; \
fi; \
done;
-compile-bench: libcpupower.so.$(LIB_MAJ)
- @V=$(V) confdir=$(confdir) $(MAKE) -C bench
+compile-bench: $(OUTPUT)libcpupower.so.$(LIB_MAJ)
+ @V=$(V) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT)
+
+# we compile into subdirectories. if the target directory is not the
+# source directory, they might not exists. So we depend the various
+# files onto their directories.
+DIRECTORY_DEPS = $(LIB_OBJS) $(UTIL_OBJS) $(GMO_FILES)
+$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
+
+# In the second step, we make a rule to actually create these directories
+$(sort $(dir $(DIRECTORY_DEPS))):
+ $(ECHO) " MKDIR " $@
+ $(QUIET) $(MKDIR) -p $@ 2>/dev/null
clean:
- -find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
+ -find $(OUTPUT) \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
| xargs rm -f
- -rm -f cpupower
- -rm -f libcpupower.so*
- -rm -rf po/*.gmo po/*.pot
- $(MAKE) -C bench clean
+ -rm -f $(OUTPUT)cpupower
+ -rm -f $(OUTPUT)libcpupower.so*
+ -rm -rf $(OUTPUT)po/*.{gmo,pot}
+ $(MAKE) -C bench O=$(OUTPUT) clean
install-lib:
$(INSTALL) -d $(DESTDIR)${libdir}
- $(CP) libcpupower.so* $(DESTDIR)${libdir}/
+ $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/
$(INSTALL) -d $(DESTDIR)${includedir}
$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
install-tools:
$(INSTALL) -d $(DESTDIR)${bindir}
- $(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir}
+ $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir}
install-man:
$(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
@@ -253,13 +278,13 @@ install-man:
install-gmo:
$(INSTALL) -d $(DESTDIR)${localedir}
for HLANG in $(LANGUAGES); do \
- echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
- $(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
+ echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
+ $(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
done;
install-bench:
@#DESTDIR must be set from outside to survive
- @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install
+ @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) install
install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH)
diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile
index 2b67606..7ec7021 100644
--- a/tools/power/cpupower/bench/Makefile
+++ b/tools/power/cpupower/bench/Makefile
@@ -1,29 +1,36 @@
-LIBS = -L../ -lm -lcpupower
+OUTPUT := ./
+ifeq ("$(origin O)", "command line")
+ifneq ($(O),)
+ OUTPUT := $(O)/
+endif
+endif
-OBJS = main.o parse.o system.o benchmark.o
+LIBS = -L../ -L$(OUTPUT) -lm -lcpupower
+
+OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o
CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\"
-%.o : %.c
+$(OUTPUT)%.o : %.c
$(ECHO) " CC " $@
$(QUIET) $(CC) -c $(CFLAGS) $< -o $@
-cpufreq-bench: $(OBJS)
+$(OUTPUT)cpufreq-bench: $(OBJS)
$(ECHO) " CC " $@
$(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)
-all: cpufreq-bench
+all: $(OUTPUT)cpufreq-bench
install:
mkdir -p $(DESTDIR)/$(sbindir)
mkdir -p $(DESTDIR)/$(bindir)
mkdir -p $(DESTDIR)/$(docdir)
mkdir -p $(DESTDIR)/$(confdir)
- install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
+ install -m 755 $(OUTPUT)cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh
install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH
install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh
install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf
clean:
- rm -f *.o
- rm -f cpufreq-bench
+ rm -f $(OUTPUT)*.o
+ rm -f $(OUTPUT)cpufreq-bench
--
1.7.7.4
Hey,
On Wed, Feb 01, 2012 at 12:08:17PM +0100, Franck Bui-Huu wrote:
> This small patchset gives to the user the ability to build cpupower
> tool even if the source code is stored in a read-only location.
>
> Patches #1 and #2 are just minor cleanup in order to ease patch #3
> which adds the functionnality.
Thanks for your patches. I've applied all of them and will push them in the
next merge window.
Best,
Dominik
On 02/05/2012 09:32 PM, Dominik Brodowski wrote:
> Hey,
>
> On Wed, Feb 01, 2012 at 12:08:17PM +0100, Franck Bui-Huu wrote:
>> This small patchset gives to the user the ability to build cpupower
>> tool even if the source code is stored in a read-only location.
>>
>> Patches #1 and #2 are just minor cleanup in order to ease patch #3
>> which adds the functionnality.
>
> Thanks for your patches. I've applied all of them and will push them in the
> next merge window.
>
Thank you Dominik.
--
Franck