Please consider my patch to add vendor specific ID (0a5c 21f3) for
BCM20702A0. This patch was tested by us and reported to work.
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21f3 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=74DE2B344A7B
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Manoj Iyer <[email protected]>
Tested-by: Dennis Chua <[email protected]>
---
drivers/bluetooth/btusb.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f00f596..10e33be 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0a5c, 0x21e3) },
+ { USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
{ } /* Terminating entry */
--
1.7.8.3
Hi Manoj,
> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0a5c ProdID=21f3 Rev=01.12
> S: Manufacturer=Broadcom Corp
> S: Product=BCM20702A0
> S: SerialNumber=74DE2B344A7B
> C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> Signed-off-by: Manoj Iyer <[email protected]>
> Tested-by: Dennis Chua <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
Acked-by: Marcel Holtmann <[email protected]>
Regards
Marcel
Hi,
On Thu, Feb 02, 2012, Manoj Iyer wrote:
> T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0a5c ProdID=21f3 Rev=01.12
> S: Manufacturer=Broadcom Corp
> S: Product=BCM20702A0
> S: SerialNumber=74DE2B344A7B
> C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
>
> Signed-off-by: Manoj Iyer <[email protected]>
> Tested-by: Dennis Chua <[email protected]>
> ---
> drivers/bluetooth/btusb.c | 1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
Applied to my bluetooth-next tree (after adding the missing Bluetooth:
prefix to the summary line). Thanks.
Johan