Some regulator hardware use table based mapping can set volt_table in
regulator_desc and use regulator_list_voltage_table() for their list_voltage
callback.
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/core.c | 25 +++++++++++++++++++++++++
include/linux/regulator/driver.h | 5 +++++
2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index faa0532..0b15587 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1880,6 +1880,31 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev,
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
/**
+ * regulator_list_voltage_table - List voltages with table based mapping
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with table based mapping between voltages and
+ * selectors can set volt_table in the regulator descriptor
+ * and then use this function as their list_voltage() operation.
+ */
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ if (!rdev->desc->volt_table) {
+ BUG_ON(!rdev->desc->volt_table);
+ return -EINVAL;
+ }
+
+ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
+
+ return rdev->desc->volt_table[selector];
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
+
+/**
* regulator_list_voltage - enumerate supported voltages
* @regulator: regulator source
* @selector: identify voltage to list
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index b0432cc..8022638 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -170,6 +170,7 @@ enum regulator_type {
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
+ * @volt_table: Voltage mapping table (if table based mapping)
*
* @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
* @vsel_mask: Mask for register bitfield used for selector
@@ -189,6 +190,8 @@ struct regulator_desc {
unsigned int min_uV;
unsigned int uV_step;
+ const unsigned int *volt_table;
+
unsigned int vsel_reg;
unsigned int vsel_mask;
unsigned int enable_reg;
@@ -271,6 +274,8 @@ int regulator_mode_to_status(unsigned int);
int regulator_list_voltage_linear(struct regulator_dev *rdev,
unsigned int selector);
+int regulator_list_voltage_table(struct regulator_dev *rdev,
+ unsigned int selector);
int regulator_map_voltage_linear(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_map_voltage_iterate(struct regulator_dev *rdev,
--
1.7.5.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab3100.c | 50 ++++++++++++-------------------------------
1 files changed, 14 insertions(+), 36 deletions(-)
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 03f4d9c..b088b6c 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -45,9 +45,6 @@
* @regreg: regulator register number in the AB3100
* @fixed_voltage: a fixed voltage for this regulator, if this
* 0 the voltages array is used instead.
- * @typ_voltages: an array of available typical voltages for
- * this regulator
- * @voltages_len: length of the array of available voltages
*/
struct ab3100_regulator {
struct regulator_dev *rdev;
@@ -55,8 +52,6 @@ struct ab3100_regulator {
struct ab3100_platform_data *plfdata;
u8 regreg;
int fixed_voltage;
- int const *typ_voltages;
- u8 voltages_len;
};
/* The order in which registers are initialized */
@@ -80,7 +75,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
#define LDO_C_VOLTAGE 2650000
#define LDO_D_VOLTAGE 2650000
-static const int ldo_e_buck_typ_voltages[] = {
+static const unsigned int ldo_e_buck_typ_voltages[] = {
1800000,
1400000,
1300000,
@@ -90,7 +85,7 @@ static const int ldo_e_buck_typ_voltages[] = {
900000,
};
-static const int ldo_f_typ_voltages[] = {
+static const unsigned int ldo_f_typ_voltages[] = {
1800000,
1400000,
1300000,
@@ -101,21 +96,21 @@ static const int ldo_f_typ_voltages[] = {
2650000,
};
-static const int ldo_g_typ_voltages[] = {
+static const unsigned int ldo_g_typ_voltages[] = {
2850000,
2750000,
1800000,
1500000,
};
-static const int ldo_h_typ_voltages[] = {
+static const unsigned int ldo_h_typ_voltages[] = {
2750000,
1800000,
1500000,
1200000,
};
-static const int ldo_k_typ_voltages[] = {
+static const unsigned int ldo_k_typ_voltages[] = {
2750000,
1800000,
};
@@ -138,28 +133,18 @@ ab3100_regulators[AB3100_NUM_REGULATORS] = {
},
{
.regreg = AB3100_LDO_E,
- .typ_voltages = ldo_e_buck_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
},
{
.regreg = AB3100_LDO_F,
- .typ_voltages = ldo_f_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_f_typ_voltages),
},
{
.regreg = AB3100_LDO_G,
- .typ_voltages = ldo_g_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_g_typ_voltages),
},
{
.regreg = AB3100_LDO_H,
- .typ_voltages = ldo_h_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_h_typ_voltages),
},
{
.regreg = AB3100_LDO_K,
- .typ_voltages = ldo_k_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_k_typ_voltages),
},
{
.regreg = AB3100_LDO_EXT,
@@ -167,8 +152,6 @@ ab3100_regulators[AB3100_NUM_REGULATORS] = {
},
{
.regreg = AB3100_BUCK,
- .typ_voltages = ldo_e_buck_typ_voltages,
- .voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
},
};
@@ -257,16 +240,6 @@ static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
return regval & AB3100_REG_ON_MASK;
}
-static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
- unsigned selector)
-{
- struct ab3100_regulator *abreg = reg->reg_data;
-
- if (selector >= abreg->voltages_len)
- return -EINVAL;
- return abreg->typ_voltages[selector];
-}
-
static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
@@ -294,14 +267,14 @@ static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
regval &= 0xE0;
regval >>= 5;
- if (regval >= abreg->voltages_len) {
+ if (regval >= reg->desc->n_voltages) {
dev_err(®->dev,
"regulator register %02x contains an illegal voltage setting\n",
abreg->regreg);
return -EINVAL;
}
- return abreg->typ_voltages[regval];
+ return reg->desc->volt_table[regval];
}
static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
@@ -423,7 +396,7 @@ static struct regulator_ops regulator_ops_variable = {
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
- .list_voltage = ab3100_list_voltage_regulator,
+ .list_voltage = regulator_list_voltage_table,
.enable_time = ab3100_enable_time_regulator,
};
@@ -434,7 +407,7 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
- .list_voltage = ab3100_list_voltage_regulator,
+ .list_voltage = regulator_list_voltage_table,
.enable_time = ab3100_enable_time_regulator,
};
@@ -479,6 +452,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.id = AB3100_LDO_E,
.ops = ®ulator_ops_variable_sleepable,
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+ .volt_table = ldo_e_buck_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -487,6 +461,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.id = AB3100_LDO_F,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
+ .volt_table = ldo_f_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -495,6 +470,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.id = AB3100_LDO_G,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
+ .volt_table = ldo_g_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -503,6 +479,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.id = AB3100_LDO_H,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
+ .volt_table = ldo_h_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -511,6 +488,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.id = AB3100_LDO_K,
.ops = ®ulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
+ .volt_table = ldo_k_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
--
1.7.5.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 64 ++++++++++++++++---------------------------
1 files changed, 24 insertions(+), 40 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index e1b8c54..da883e6 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -40,8 +40,6 @@
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
- * @voltages: supported voltage table
- * @voltages_len: number of supported voltages for the regulator
* @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
@@ -58,13 +56,11 @@ struct ab8500_regulator_info {
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
- int const *voltages;
- int voltages_len;
unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
-static const int ldo_vauxn_voltages[] = {
+static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
@@ -83,7 +79,7 @@ static const int ldo_vauxn_voltages[] = {
3300000,
};
-static const int ldo_vaux3_voltages[] = {
+static const unsigned int ldo_vaux3_voltages[] = {
1200000,
1500000,
1800000,
@@ -94,7 +90,7 @@ static const int ldo_vaux3_voltages[] = {
2910000,
};
-static const int ldo_vintcore_voltages[] = {
+static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
1250000,
@@ -185,25 +181,6 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
return false;
}
-static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- if (info == NULL) {
- dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
- return -EINVAL;
- }
-
- /* return the uV for the fixed regulators */
- if (info->fixed_uV)
- return info->fixed_uV;
-
- if (selector >= info->voltages_len)
- return -EINVAL;
-
- return info->voltages[selector];
-}
-
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
int ret, val;
@@ -296,11 +273,24 @@ static struct regulator_ops ab8500_regulator_ops = {
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
- .list_voltage = ab8500_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
+static int ab8500_fixed_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ return info->fixed_uV;
+}
+
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
@@ -318,7 +308,7 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage = ab8500_fixed_get_voltage,
- .list_voltage = ab8500_list_voltage,
+ .list_voltage = ab8500_fixed_list_voltage,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
@@ -329,7 +319,7 @@ static struct ab8500_regulator_info
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
- * volt bank, reg, mask, table, table length
+ * volt bank, reg, mask
*/
[AB8500_LDO_AUX1] = {
.desc = {
@@ -339,6 +329,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -349,8 +340,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
- .voltages = ldo_vauxn_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX2] = {
.desc = {
@@ -360,6 +349,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -370,8 +360,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
- .voltages = ldo_vauxn_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX3] = {
.desc = {
@@ -381,6 +369,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ .volt_table = ldo_vaux3_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -391,8 +380,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
- .voltages = ldo_vaux3_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
},
[AB8500_LDO_INTCORE] = {
.desc = {
@@ -402,6 +389,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ .volt_table = ldo_vintcore_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -412,8 +400,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
- .voltages = ldo_vintcore_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
},
/*
@@ -769,9 +755,7 @@ static __devinit int ab8500_regulator_register(struct platform_device *pdev,
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
- info->voltages = ldo_vauxn_voltages;
- info->voltages_len =
- ARRAY_SIZE(ldo_vauxn_voltages);
+ info->desc.volt_table = ldo_vauxn_voltages;
info->voltage_mask = 0xf;
}
}
--
1.7.5.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/lp3971.c | 64 +++++++++++++++----------------------------
1 files changed, 22 insertions(+), 42 deletions(-)
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 981bea9..87d0a5b 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -65,11 +65,11 @@ static const int buck_base_addr[] = {
#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
-static const int buck_voltage_map[] = {
- 0, 800, 850, 900, 950, 1000, 1050, 1100,
- 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
- 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
- 3000, 3300,
+static const unsigned int buck_voltage_map[] = {
+ 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
+ 3000000, 3300000,
};
#define BUCK_TARGET_VOL_MASK 0x3f
@@ -98,39 +98,19 @@ static const int buck_voltage_map[] = {
#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
#define LDO_VOL_CONTR_MASK 0x0f
-static const int ldo45_voltage_map[] = {
- 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
- 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+static const unsigned int ldo45_voltage_map[] = {
+ 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
+ 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
-static const int ldo123_voltage_map[] = {
- 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
- 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+static const unsigned int ldo123_voltage_map[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
-static const int *ldo_voltage_map[] = {
- ldo123_voltage_map, /* LDO1 */
- ldo123_voltage_map, /* LDO2 */
- ldo123_voltage_map, /* LDO3 */
- ldo45_voltage_map, /* LDO4 */
- ldo45_voltage_map, /* LDO5 */
-};
-
-#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
-
#define LDO_VOL_MIN_IDX 0x00
#define LDO_VOL_MAX_IDX 0x0f
-static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int ldo = rdev_get_id(dev) - LP3971_LDO1;
-
- if (index > LDO_VOL_MAX_IDX)
- return -EINVAL;
-
- return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
-}
-
static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
@@ -169,7 +149,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
- return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
+ return dev->desc->volt_table[val];
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -184,7 +164,7 @@ static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3971_ldo_ops = {
- .list_voltage = lp3971_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
@@ -192,14 +172,6 @@ static struct regulator_ops lp3971_ldo_ops = {
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
-static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX)
- return -EINVAL;
-
- return 1000 * buck_voltage_map[index];
-}
-
static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
@@ -273,7 +245,7 @@ static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3971_dcdc_ops = {
- .list_voltage = lp3971_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
@@ -287,6 +259,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO1,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -295,6 +268,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO2,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -303,6 +277,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO3,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
+ .volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -311,6 +286,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO4,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -319,6 +295,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO5,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
+ .volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -327,6 +304,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC1,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -335,6 +313,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC2,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -343,6 +322,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC3,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
+ .volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
--
1.7.5.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/lp3972.c | 102 +++++++++++++++----------------------------
1 files changed, 36 insertions(+), 66 deletions(-)
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index de073df..3cdc755 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -74,54 +74,40 @@ struct lp3972 {
#define LP3972_OVER2_LDO4_EN BIT(4)
#define LP3972_OVER1_S_EN BIT(2)
-static const int ldo1_voltage_map[] = {
- 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
- 1900, 1925, 1950, 1975, 2000,
+static const unsigned int ldo1_voltage_map[] = {
+ 1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 1975000, 2000000,
};
-static const int ldo23_voltage_map[] = {
- 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
- 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
+static const unsigned int ldo23_voltage_map[] = {
+ 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
+ 2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
-static const int ldo4_voltage_map[] = {
- 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
- 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
+static const unsigned int ldo4_voltage_map[] = {
+ 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
+ 1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
-static const int ldo5_voltage_map[] = {
- 0, 0, 0, 0, 0, 850, 875, 900,
- 925, 950, 975, 1000, 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+static const unsigned int ldo5_voltage_map[] = {
+ 0, 0, 0, 0, 0, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
-static const int buck1_voltage_map[] = {
- 725, 750, 775, 800, 825, 850, 875, 900,
- 925, 950, 975, 1000, 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
+static const unsigned int buck1_voltage_map[] = {
+ 725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
-static const int buck23_voltage_map[] = {
- 0, 800, 850, 900, 950, 1000, 1050, 1100,
- 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
- 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
- 3000, 3300,
-};
-
-static const int *ldo_voltage_map[] = {
- ldo1_voltage_map,
- ldo23_voltage_map,
- ldo23_voltage_map,
- ldo4_voltage_map,
- ldo5_voltage_map,
-};
-
-static const int *buck_voltage_map[] = {
- buck1_voltage_map,
- buck23_voltage_map,
- buck23_voltage_map,
+static const unsigned int buck23_voltage_map[] = {
+ 0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
+ 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
+ 1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
+ 3000000, 3300000,
};
static const int ldo_output_enable_mask[] = {
@@ -160,7 +146,6 @@ static const int buck_base_addr[] = {
LP3972_B3TV_REG,
};
-#define LP3972_LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[x])
#define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
#define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])
@@ -177,7 +162,6 @@ static const int buck_base_addr[] = {
#define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
#define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)
-#define LP3972_BUCK_VOL_VALUE_MAP(x) (buck_voltage_map[x])
#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
#define LP3972_BUCK_VOL_MASK 0x1f
@@ -242,17 +226,6 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
return ret;
}
-static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int ldo = rdev_get_id(dev) - LP3972_LDO1;
-
- if (index < LP3972_LDO_VOL_MIN_IDX(ldo) ||
- index > LP3972_LDO_VOL_MAX_IDX(ldo))
- return -EINVAL;
-
- return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index];
-}
-
static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
@@ -294,7 +267,7 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
- return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val];
+ return dev->desc->volt_table[val];
}
static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -337,7 +310,7 @@ static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3972_ldo_ops = {
- .list_voltage = lp3972_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3972_ldo_is_enabled,
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
@@ -345,17 +318,6 @@ static struct regulator_ops lp3972_ldo_ops = {
.set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
-static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- int buck = rdev_get_id(dev) - LP3972_DCDC1;
-
- if (index < LP3972_BUCK_VOL_MIN_IDX(buck) ||
- index > LP3972_BUCK_VOL_MAX_IDX(buck))
- return -EINVAL;
-
- return 1000 * buck_voltage_map[buck][index];
-}
-
static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
@@ -401,7 +363,7 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
reg &= LP3972_BUCK_VOL_MASK;
if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck))
- val = 1000 * buck_voltage_map[buck][reg];
+ val = dev->desc->volt_table[reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value."
@@ -436,7 +398,7 @@ static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3972_dcdc_ops = {
- .list_voltage = lp3972_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.is_enabled = lp3972_dcdc_is_enabled,
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
@@ -450,6 +412,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO1,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo1_voltage_map),
+ .volt_table = ldo1_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -458,6 +421,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO2,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
+ .volt_table = ldo23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -466,6 +430,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO3,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
+ .volt_table = ldo23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -474,6 +439,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO4,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo4_voltage_map),
+ .volt_table = ldo4_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -482,6 +448,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO5,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo5_voltage_map),
+ .volt_table = ldo5_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -490,6 +457,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_DCDC1,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck1_voltage_map),
+ .volt_table = buck1_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -498,6 +466,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_DCDC2,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
+ .volt_table = buck23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
@@ -506,6 +475,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_DCDC3,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
+ .volt_table = buck23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
--
1.7.5.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps6105x-regulator.c | 14 +++-----------
1 files changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/tps6105x-regulator.c b/drivers/regulator/tps6105x-regulator.c
index d840d84..1378409 100644
--- a/drivers/regulator/tps6105x-regulator.c
+++ b/drivers/regulator/tps6105x-regulator.c
@@ -20,7 +20,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tps6105x.h>
-static const int tps6105x_voltages[] = {
+static const unsigned int tps6105x_voltages[] = {
4500000,
5000000,
5250000,
@@ -105,22 +105,13 @@ static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev,
return 0;
}
-static int tps6105x_regulator_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
-{
- if (selector >= ARRAY_SIZE(tps6105x_voltages))
- return -EINVAL;
-
- return tps6105x_voltages[selector];
-}
-
static struct regulator_ops tps6105x_regulator_ops = {
.enable = tps6105x_regulator_enable,
.disable = tps6105x_regulator_disable,
.is_enabled = tps6105x_regulator_is_enabled,
.get_voltage_sel = tps6105x_regulator_get_voltage_sel,
.set_voltage_sel = tps6105x_regulator_set_voltage_sel,
- .list_voltage = tps6105x_regulator_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static const struct regulator_desc tps6105x_regulator_desc = {
@@ -130,6 +121,7 @@ static const struct regulator_desc tps6105x_regulator_desc = {
.id = 0,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(tps6105x_voltages),
+ .volt_table = tps6105x_voltages,
};
/*
--
1.7.5.4
Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps6507x-regulator.c | 100 ++++++++++++++------------------
1 files changed, 43 insertions(+), 57 deletions(-)
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index da38be1..c771e10 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -43,50 +43,50 @@
/* Number of total regulators available */
#define TPS6507X_NUM_REGULATOR (TPS6507X_NUM_DCDC + TPS6507X_NUM_LDO)
-/* Supported voltage values for regulators (in milliVolts) */
-static const u16 VDCDCx_VSEL_table[] = {
- 725, 750, 775, 800,
- 825, 850, 875, 900,
- 925, 950, 975, 1000,
- 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200,
- 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400,
- 1425, 1450, 1475, 1500,
- 1550, 1600, 1650, 1700,
- 1750, 1800, 1850, 1900,
- 1950, 2000, 2050, 2100,
- 2150, 2200, 2250, 2300,
- 2350, 2400, 2450, 2500,
- 2550, 2600, 2650, 2700,
- 2750, 2800, 2850, 2900,
- 3000, 3100, 3200, 3300,
+/* Supported voltage values for regulators (in microVolts) */
+static const unsigned int VDCDCx_VSEL_table[] = {
+ 725000, 750000, 775000, 800000,
+ 825000, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000,
+ 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000,
+ 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000,
+ 1425000, 1450000, 1475000, 1500000,
+ 1550000, 1600000, 1650000, 1700000,
+ 1750000, 1800000, 1850000, 1900000,
+ 1950000, 2000000, 2050000, 2100000,
+ 2150000, 2200000, 2250000, 2300000,
+ 2350000, 2400000, 2450000, 2500000,
+ 2550000, 2600000, 2650000, 2700000,
+ 2750000, 2800000, 2850000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
};
-static const u16 LDO1_VSEL_table[] = {
- 1000, 1100, 1200, 1250,
- 1300, 1350, 1400, 1500,
- 1600, 1800, 2500, 2750,
- 2800, 3000, 3100, 3300,
+static const unsigned int LDO1_VSEL_table[] = {
+ 1000000, 1100000, 1200000, 1250000,
+ 1300000, 1350000, 1400000, 1500000,
+ 1600000, 1800000, 2500000, 2750000,
+ 2800000, 3000000, 3100000, 3300000,
};
-static const u16 LDO2_VSEL_table[] = {
- 725, 750, 775, 800,
- 825, 850, 875, 900,
- 925, 950, 975, 1000,
- 1025, 1050, 1075, 1100,
- 1125, 1150, 1175, 1200,
- 1225, 1250, 1275, 1300,
- 1325, 1350, 1375, 1400,
- 1425, 1450, 1475, 1500,
- 1550, 1600, 1650, 1700,
- 1750, 1800, 1850, 1900,
- 1950, 2000, 2050, 2100,
- 2150, 2200, 2250, 2300,
- 2350, 2400, 2450, 2500,
- 2550, 2600, 2650, 2700,
- 2750, 2800, 2850, 2900,
- 3000, 3100, 3200, 3300,
+static const unsigned int LDO2_VSEL_table[] = {
+ 725000, 750000, 775000, 800000,
+ 825000, 850000, 875000, 900000,
+ 925000, 950000, 975000, 1000000,
+ 1025000, 1050000, 1075000, 1100000,
+ 1125000, 1150000, 1175000, 1200000,
+ 1225000, 1250000, 1275000, 1300000,
+ 1325000, 1350000, 1375000, 1400000,
+ 1425000, 1450000, 1475000, 1500000,
+ 1550000, 1600000, 1650000, 1700000,
+ 1750000, 1800000, 1850000, 1900000,
+ 1950000, 2000000, 2050000, 2100000,
+ 2150000, 2200000, 2250000, 2300000,
+ 2350000, 2400000, 2450000, 2500000,
+ 2550000, 2600000, 2650000, 2700000,
+ 2750000, 2800000, 2850000, 2900000,
+ 3000000, 3100000, 3200000, 3300000,
};
struct tps_info {
@@ -94,7 +94,7 @@ struct tps_info {
unsigned min_uV;
unsigned max_uV;
u8 table_len;
- const u16 *table;
+ const unsigned int *table;
/* Does DCDC high or the low register defines output voltage? */
bool defdcdc_default;
@@ -375,28 +375,13 @@ static int tps6507x_pmic_set_voltage_sel(struct regulator_dev *dev,
return tps6507x_pmic_reg_write(tps, reg, data);
}
-static int tps6507x_pmic_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps6507x_pmic *tps = rdev_get_drvdata(dev);
- int rid = rdev_get_id(dev);
-
- if (rid < TPS6507X_DCDC_1 || rid > TPS6507X_LDO_2)
- return -EINVAL;
-
- if (selector >= tps->info[rid]->table_len)
- return -EINVAL;
- else
- return tps->info[rid]->table[selector] * 1000;
-}
-
static struct regulator_ops tps6507x_pmic_ops = {
.is_enabled = tps6507x_pmic_is_enabled,
.enable = tps6507x_pmic_enable,
.disable = tps6507x_pmic_disable,
.get_voltage_sel = tps6507x_pmic_get_voltage_sel,
.set_voltage_sel = tps6507x_pmic_set_voltage_sel,
- .list_voltage = tps6507x_pmic_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
@@ -449,6 +434,7 @@ static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
tps->desc[i].name = info->name;
tps->desc[i].id = i;
tps->desc[i].n_voltages = info->table_len;
+ tps->desc[i].volt_table = info->table;
tps->desc[i].ops = &tps6507x_pmic_ops;
tps->desc[i].type = REGULATOR_VOLTAGE;
tps->desc[i].owner = THIS_MODULE;
--
1.7.5.4
On Sun, May 20, 2012 at 10:30:21AM +0800, Axel Lin wrote:
> Some regulator hardware use table based mapping can set volt_table in
> regulator_desc and use regulator_list_voltage_table() for their list_voltage
> callback.
Applied all, thanks!
On Sun, May 20, 2012 at 4:31 AM, Axel Lin <[email protected]> wrote:
> Signed-off-by: Axel Lin <[email protected]>
> ---
> ?drivers/regulator/ab3100.c | ? 50 ++++++++++++-------------------------------
> ?1 files changed, 14 insertions(+), 36 deletions(-)
Acked-by: Linus Walleij <[email protected]>
Thanks,
Linus Walleij
On Sun, May 20, 2012 at 4:33 AM, Axel Lin <[email protected]> wrote:
> Signed-off-by: Axel Lin <[email protected]>
> ---
> ?drivers/regulator/ab8500.c | ? 64 ++++++++++++++++---------------------------
Acked-by: Linus Walleij <[email protected]>
Hm, probably also already applied, whatever.
Yours,
Linus Walleij
On Mon, May 21, 2012 at 12:43:16PM +0200, Linus Walleij wrote:
> Acked-by: Linus Walleij <[email protected]>
> Hm, probably also already applied, whatever.
It was but it's not made 3.5 so I'll add your ack - review for the
ab8500 has been a bit patchy so I have been tending to apply things
fairly quickly rather than waiting.
On Sun, May 20, 2012 at 4:37 AM, Axel Lin <[email protected]> wrote:
> Signed-off-by: Axel Lin <[email protected]>
> ---
> ?drivers/regulator/tps6105x-regulator.c | ? 14 +++-----------
> ?1 files changed, 3 insertions(+), 11 deletions(-)
Acked-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij