This patch is initial support for max77693 led driver.
MAX77693 has 2 FLEDS, and 2 modes, FLASH/TORCH. It can be set up brightness,
opeation, flash timer by platform data, and especially brightness can be modified
by led API either. This driver uses regmap to access to its register.
Signed-off-by: Jonghwa LEE <[email protected]>
Signed-off-by: MyungJoo Ham <[email protected]>
Signed-off-by: Kyungmin Park <[email protected]>
---
drivers/leds/Kconfig | 8 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-max77693.c | 301 +++++++++++++++++++++++++++++++++++++++++
include/linux/leds-max77693.h | 154 +++++++++++++++++++++
4 files changed, 464 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-max77693.c
create mode 100644 include/linux/leds-max77693.h
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ff4b8cf..6a644df 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -387,6 +387,14 @@ config LEDS_TCA6507
LED driver chips accessed via the I2C bus.
Driver support brightness control and hardware-assisted blinking.
+config LEDS_MAX77693
+ bool "LED support for the MAX77693"
+ depends on LEDS_CLASS
+ depends on MFD_MAX77693
+ default y
+ help
+ This option enables support for the LEDs on the MAX77693.
+
config LEDS_MAX8997
tristate "LED support for MAX8997 PMIC"
depends on LEDS_CLASS && MFD_MAX8997
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 890481c..ff4ff2c 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
+obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
new file mode 100644
index 0000000..dee8f59
--- /dev/null
+++ b/drivers/leds/leds-max77693.c
@@ -0,0 +1,301 @@
+/*
+ * LED driver for Maxim MAX77693 - leds-max77673.c
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * ByungChang Cha <[email protected]>
+ * Jonghwa Lee <[email protected]>
+ *
+ * This program is not provided / owned by Maxim Integrated Products.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-private.h>
+#include <linux/leds-max77693.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+struct max77693_led_data {
+ struct led_classdev led;
+ struct max77693_dev *max77693;
+ struct max77693_led *data;
+ struct regmap *regmap;
+ struct work_struct work;
+ struct mutex lock;
+ spinlock_t value_lock;
+ int brightness;
+};
+
+static u8 led_en_mask[MAX77693_LED_MAX] = {
+ MAX77693_FLASH_FLED1_EN,
+ MAX77693_FLASH_FLED2_EN,
+ MAX77693_TORCH_FLED1_EN,
+ MAX77693_TORCH_FLED2_EN
+};
+
+static u8 reg_led_timer[MAX77693_LED_MAX] = {
+ MAX77693_LED_REG_FLASH_TIMER,
+ MAX77693_LED_REG_FLASH_TIMER,
+ MAX77693_LED_REG_ITORCHTIMER,
+ MAX77693_LED_REG_ITORCHTIMER,
+};
+
+static u8 reg_led_current[MAX77693_LED_MAX] = {
+ MAX77693_LED_REG_IFLASH1,
+ MAX77693_LED_REG_IFLASH2,
+ MAX77693_LED_REG_ITORCH,
+ MAX77693_LED_REG_ITORCH,
+};
+
+static u8 led_current_mask[MAX77693_LED_MAX] = {
+ MAX77693_FLASH_IOUT1,
+ MAX77693_FLASH_IOUT2,
+ MAX77693_TORCH_IOUT1,
+ MAX77693_TORCH_IOUT2
+};
+
+static u8 led_current_shift[MAX77693_LED_MAX] = {
+ 0,
+ 0,
+ 0,
+ 4,
+};
+
+static int max77693_led_get_en_value(struct max77693_led_data *led_data, int on)
+{
+ if (on)
+ return MAX77693_FLED_I2C;
+
+ if (led_data->data->cntrl_mode == MAX77693_LED_CTRL_BY_I2C)
+ return MAX77693_FLED_OFF;
+ else if (led_data->data->id < 2)
+ return MAX77693_FLED_FLASHEN;
+ else
+ return MAX77693_FLED_TORCHEN;
+}
+
+static void max77693_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ unsigned long flags;
+ struct max77693_led_data *led_data
+ = container_of(led_cdev, struct max77693_led_data, led);
+
+ pr_debug("[LED] %s\n", __func__);
+
+ spin_lock_irqsave(&led_data->value_lock, flags);
+ led_data->brightness = min_t(int, value, MAX77693_FLASH_IOUT1);
+ spin_unlock_irqrestore(&led_data->value_lock, flags);
+
+ schedule_work(&led_data->work);
+}
+
+static void led_set(struct max77693_led_data *led_data)
+{
+ int ret;
+ struct max77693_led *data = led_data->data;
+ int id = data->id;
+ u8 mask;
+ u8 shift = led_current_shift[id];
+ int value;
+
+ value = max77693_led_get_en_value(led_data, 0);
+ mask = led_en_mask[id];
+ ret = regmap_update_bits(led_data->regmap,
+ MAX77693_LED_REG_FLASH_EN,
+ led_en_mask[id],
+ value << (ffs(led_en_mask[id]) - 1));
+ if (unlikely(ret))
+ goto error_set_bits;
+
+ ret = regmap_update_bits(led_data->regmap,
+ reg_led_current[id],
+ led_current_mask[id],
+ led_data->brightness << shift);
+ if (unlikely(ret))
+ goto error_set_bits;
+
+ return;
+
+error_set_bits:
+ pr_err("%s: can't set led level %d\n", __func__, ret);
+ return;
+}
+
+static void max77693_led_work(struct work_struct *work)
+{
+ struct max77693_led_data *led_data
+ = container_of(work, struct max77693_led_data, work);
+
+ pr_debug("[LED] %s\n", __func__);
+
+ mutex_lock(&led_data->lock);
+ led_set(led_data);
+ mutex_unlock(&led_data->lock);
+}
+
+static int max77693_led_setup(struct max77693_led_data *led_data)
+{
+ int ret = 0;
+ struct max77693_led *data = led_data->data;
+ int id = data->id;
+ int value;
+
+ ret |= regmap_write(led_data->regmap, MAX77693_LED_REG_VOUT_CNTL,
+ MAX77693_BOOST_FLASH_FLEDNUM_2
+ | MAX77693_BOOST_FLASH_MODE_BOTH);
+ ret |= regmap_write(led_data->regmap, MAX77693_LED_REG_VOUT_FLASH1,
+ MAX77693_BOOST_VOUT_FLASH_FROM_VOLT(5000));
+ ret |= regmap_write(led_data->regmap,
+ MAX77693_LED_REG_MAX_FLASH1, 0xEC);
+ ret |= regmap_write(led_data->regmap,
+ MAX77693_LED_REG_MAX_FLASH2, 0x00);
+
+ value = max77693_led_get_en_value(led_data, 0);
+
+ ret |= regmap_update_bits(led_data->regmap,
+ MAX77693_LED_REG_FLASH_EN,
+ led_en_mask[id],
+ value << (ffs(led_en_mask[id]) - 1));
+
+ /* Set TORCH_TMR_DUR or FLASH_TMR_DUR */
+ if (id < 2) {
+ ret |= regmap_write(led_data->regmap, reg_led_timer[id],
+ (data->timer | data->timer_mode << 7));
+ } else {
+ ret |= regmap_write(led_data->regmap, reg_led_timer[id],
+ 0xC0);
+ }
+
+ /* Set current */
+ ret |= regmap_update_bits(led_data->regmap, reg_led_current[id],
+ led_current_mask[id],
+ led_data->brightness << led_current_shift[id]);
+
+ return ret;
+}
+
+static int max77693_led_probe(struct platform_device *pdev)
+{
+ struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+ struct max77693_platform_data *max77693_pdata
+ = dev_get_platdata(max77693->dev);
+ struct max77693_led_platform_data *pdata;
+ struct max77693_led *data;
+ struct max77693_led_data *led_data;
+ struct max77693_led_data **led_datas;
+ int ret = 0;
+ int i;
+
+ if (max77693_pdata->led_data) {
+ pdata = max77693_pdata->led_data;
+ } else {
+ pr_err("%s : No plaform data\n", __func__);
+ return -ENODEV;
+ }
+
+ led_datas = devm_kzalloc(max77693->dev,
+ sizeof(struct max77693_led_data *)
+ * MAX77693_LED_MAX, GFP_KERNEL);
+ if (unlikely(!led_datas)) {
+ pr_err("[LED] memory allocation error %s\n", __func__);
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, led_datas);
+
+ for (i = 0; i < pdata->num_leds; i++) {
+ data = &(pdata->leds[i]);
+ led_data = devm_kzalloc(max77693->dev,
+ sizeof(struct max77693_led_data),
+ GFP_KERNEL);
+ led_datas[i] = led_data;
+ if (unlikely(!led_data)) {
+ pr_err("[LED] memory allocation error %s\n", __func__);
+ ret = -ENOMEM;
+ continue;
+ }
+
+ led_data->max77693 = max77693;
+ led_data->regmap = max77693->regmap;
+ led_data->data = data;
+ led_data->led.name = data->name;
+ led_data->led.brightness_set = max77693_led_set;
+ led_data->led.brightness = LED_OFF;
+ led_data->brightness = data->brightness;
+ led_data->led.flags = LED_CORE_SUSPENDRESUME;
+ led_data->led.max_brightness = data->id < 2
+ ? MAX_FLASH_DRV_LEVEL : MAX_TORCH_DRV_LEVEL;
+
+ mutex_init(&led_data->lock);
+ spin_lock_init(&led_data->value_lock);
+ INIT_WORK(&led_data->work, max77693_led_work);
+
+ ret = led_classdev_register(&pdev->dev, &led_data->led);
+ if (unlikely(ret)) {
+ pr_err("unable to register LED\n");
+ ret = -EFAULT;
+ continue;
+ }
+
+ ret = max77693_led_setup(led_data);
+ if (unlikely(ret)) {
+ pr_err("unable to register LED\n");
+ led_classdev_unregister(&led_data->led);
+ ret = -EFAULT;
+ }
+ }
+ return ret;
+}
+
+static int __devexit max77693_led_remove(struct platform_device *pdev)
+{
+ struct max77693_led_data **led_datas = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i != MAX77693_LED_MAX; ++i) {
+ if (led_datas[i] == NULL)
+ continue;
+
+ cancel_work_sync(&led_datas[i]->work);
+ mutex_destroy(&led_datas[i]->lock);
+ led_classdev_unregister(&led_datas[i]->led);
+ }
+
+ return 0;
+}
+
+static struct platform_driver max77693_led_driver = {
+ .probe = max77693_led_probe,
+ .remove = __devexit_p(max77693_led_remove),
+ .driver = {
+ .name = "max77693-led",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init max77693_led_init(void)
+{
+ return platform_driver_register(&max77693_led_driver);
+}
+module_init(max77693_led_init);
+
+static void __exit max77693_led_exit(void)
+{
+ platform_driver_unregister(&max77693_led_driver);
+}
+module_exit(max77693_led_exit);
+
+MODULE_AUTHOR("ByungChang Cha <[email protected]>");
+MODULE_DESCRIPTION("MAX77693 LED driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/leds-max77693.h b/include/linux/leds-max77693.h
new file mode 100644
index 0000000..a50a120
--- /dev/null
+++ b/include/linux/leds-max77693.h
@@ -0,0 +1,154 @@
+/*
+ * leds-max77693.h - Flash-led driver for Maxim MAX77693
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * ByungChang Cha <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LEDS_MAX77693_H__
+#define __LEDS_MAX77693_H__
+
+/* MAX77693_IFLASH1 */
+#define MAX77693_FLASH_IOUT1 0x3F
+
+/* MAX77693_IFLASH2 */
+#define MAX77693_FLASH_IOUT2 0x3F
+
+/* MAX77693_ITORCH */
+#define MAX77693_TORCH_IOUT1 0x0F
+#define MAX77693_TORCH_IOUT2 0xF0
+
+/* MAX77693_TORCH_TIMER */
+#define MAX77693_TORCH_TMR_DUR 0x0F
+#define MAX77693_DIS_TORCH_TMR 0x40
+#define MAX77693_TORCH_TMR_MODE 0x80
+#define MAX77693_TORCH_TMR_MODE_ONESHOT 0x00
+#define MAX77693_TORCH_TMR_MDOE_MAXTIMER 0x01
+
+/* MAX77693_FLASH_TIMER */
+#define MAX77693_FLASH_TMR_DUR 0x0F
+#define MAX77693_FLASH_TMR_MODE 0x80
+/* MAX77693_FLASH_TMR_MODE value */
+#define MAX77693_FLASH_TMR_MODE_ONESHOT 0x00
+#define MAX77693_FLASH_TMR_MDOE_MAXTIMER 0x01
+
+/* MAX77693_FLASH_EN */
+#define MAX77693_TORCH_FLED2_EN 0x03
+#define MAX77693_TORCH_FLED1_EN 0x0C
+#define MAX77693_FLASH_FLED2_EN 0x30
+#define MAX77693_FLASH_FLED1_EN 0xC0
+/* MAX77693 FLEDx_EN value */
+#define MAX77693_FLED_OFF 0x00
+#define MAX77693_FLED_FLASHEN 0x01
+#define MAX77693_FLED_TORCHEN 0x02
+#define MAX77693_FLED_I2C 0X03
+
+/* MAX77693_VOUT_CNTL */
+#define MAX77693_BOOST_FLASH_MODE 0x07
+#define MAX77693_BOOST_FLASH_FLEDNUM 0x80
+/* MAX77693_BOOST_FLASH_MODE vaule*/
+#define MAX77693_BOOST_FLASH_MODE_OFF 0x00
+#define MAX77693_BOOST_FLASH_MODE_FLED1 0x01
+#define MAX77693_BOOST_FLASH_MODE_FLED2 0x02
+#define MAX77693_BOOST_FLASH_MODE_BOTH 0x03
+#define MAX77693_BOOST_FLASH_MODE_FIXED 0x04
+/* MAX77693_BOOST_FLASH_FLEDNUM vaule*/
+#define MAX77693_BOOST_FLASH_FLEDNUM_1 0x00
+#define MAX77693_BOOST_FLASH_FLEDNUM_2 0x80
+
+/* MAX77693_VOUT_FLASH1 */
+#define MAX77693_BOOST_VOUT_FLASH 0x7F
+#define MAX77693_BOOST_VOUT_FLASH_FROM_VOLT(mV) \
+ ((mV) <= 3300 ? 0x00 : \
+ ((mV) <= 5500 ? (((mV) - 3300) / 25 + 0x0C) : 0x7F))
+
+#define MAX_FLASH_CURRENT 1000 /* 1000mA(0x1f) */
+#define MAX_TORCH_CURRENT 250 /* 250mA(0x0f) */
+#define MAX_FLASH_DRV_LEVEL 63 /* 15.625 + 15.625*63 mA */
+#define MAX_TORCH_DRV_LEVEL 15 /* 15.625 + 15.625*15 mA */
+
+enum max77693_led_id
+{
+ MAX77693_FLASH_LED_1,
+ MAX77693_FLASH_LED_2,
+ MAX77693_TORCH_LED_1,
+ MAX77693_TORCH_LED_2,
+ MAX77693_LED_MAX,
+};
+
+enum max77693_led_time
+{
+ MAX77693_FLASH_TIME_62P5MS,
+ MAX77693_FLASH_TIME_125MS,
+ MAX77693_FLASH_TIME_187P5MS,
+ MAX77693_FLASH_TIME_250MS,
+ MAX77693_FLASH_TIME_312P5MS,
+ MAX77693_FLASH_TIME_375MS,
+ MAX77693_FLASH_TIME_437P5MS,
+ MAX77693_FLASH_TIME_500MS,
+ MAX77693_FLASH_TIME_562P5MS,
+ MAX77693_FLASH_TIME_625MS,
+ MAX77693_FLASH_TIME_687P5MS,
+ MAX77693_FLASH_TIME_750MS,
+ MAX77693_FLASH_TIME_812P5MS,
+ MAX77693_FLASH_TIME_875MS,
+ MAX77693_FLASH_TIME_937P5MS,
+ MAX77693_FLASH_TIME_1000MS,
+ MAX77693_FLASH_TIME_MAX,
+};
+
+enum max77693_torch_time
+{
+ MAX77693_TORCH_TIME_262MS,
+ MAX77693_TORCH_TIME_524MS,
+ MAX77693_TORCH_TIME_786MS,
+ MAX77693_TORCH_TIME_1048MS,
+ MAX77693_TORCH_TIME_1572MS,
+ MAX77693_TORCH_TIME_2096MS,
+ MAX77693_TORCH_TIME_2620MS,
+ MAX77693_TORCH_TIME_3114MS,
+ MAX77693_TORCH_TIME_4193MS,
+ MAX77693_TORCH_TIME_5242MS,
+ MAX77693_TORCH_TIME_6291MS,
+ MAX77693_TORCH_TIME_7340MS,
+ MAX77693_TORCH_TIME_9437MS,
+ MAX77693_TORCH_TIME_11534MS,
+ MAX77693_TORCH_TIME_13631MS,
+ MAX77693_TORCH_TIME_15728MS,
+ MAX77693_TORCH_TIME_MAX,
+};
+
+enum max77693_timer_mode
+{
+ MAX77693_TIMER_MODE_ONE_SHOT,
+ MAX77693_TIMER_MODE_MAX_TIMER,
+};
+
+enum max77693_led_cntrl_mode
+{
+ MAX77693_LED_CTRL_BY_FLASHSTB,
+ MAX77693_LED_CTRL_BY_I2C,
+};
+
+struct max77693_led
+{
+ const char *name;
+ const char *default_trigger;
+ int id;
+ int timer;
+ int brightness;
+ enum max77693_timer_mode timer_mode;
+ enum max77693_led_cntrl_mode cntrl_mode;
+};
+
+struct max77693_led_platform_data
+{
+ int num_leds;
+ struct max77693_led leds[MAX77693_LED_MAX];
+};
+
+#endif
--
1.7.4.1
Hi Jonghwa,
[PATCH] leds: MAX77693: Add MAX77694 LED driver
The subject is inconsistent, please change it to
"[PATCH] leds: Add MAX77693 LED driver"
On Fri, May 25, 2012 at 4:19 PM, Jonghwa Lee <[email protected]> wrote:
> This patch is initial support for max77693 led driver.
> MAX77693 has 2 FLEDS, and 2 modes, FLASH/TORCH. It can be set up brightness,
> opeation, flash timer by platform data, and especially brightness can be modified
> by led API either. This driver uses regmap to access to its register.
>
> Signed-off-by: Jonghwa LEE <[email protected]>
> Signed-off-by: MyungJoo Ham <[email protected]>
> Signed-off-by: Kyungmin Park <[email protected]>
> ---
> ?drivers/leds/Kconfig ? ? ? ? ?| ? ?8 +
> ?drivers/leds/Makefile ? ? ? ? | ? ?1 +
> ?drivers/leds/leds-max77693.c ?| ?301 +++++++++++++++++++++++++++++++++++++++++
> ?include/linux/leds-max77693.h | ?154 +++++++++++++++++++++
> ?4 files changed, 464 insertions(+), 0 deletions(-)
> ?create mode 100644 drivers/leds/leds-max77693.c
> ?create mode 100644 include/linux/leds-max77693.h
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index ff4b8cf..6a644df 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -387,6 +387,14 @@ config LEDS_TCA6507
> ? ? ? ? ?LED driver chips accessed via the I2C bus.
> ? ? ? ? ?Driver support brightness control and hardware-assisted blinking.
>
> +config LEDS_MAX77693
> + ? ? ? bool "LED support for the MAX77693"
Can this driver be module? if yes, it should be "tristate".
> + ? ? ? depends on LEDS_CLASS
> + ? ? ? depends on MFD_MAX77693
It can be "depends on LEDS_CLASS && MFD_MAX77693" as others
> + ? ? ? default y
I don't think this default is necessary here.
> + ? ? ? help
> + ? ? ? ? This option enables support for the LEDs on the MAX77693.
> +
> ?config LEDS_MAX8997
> ? ? ? ?tristate "LED support for MAX8997 PMIC"
> ? ? ? ?depends on LEDS_CLASS && MFD_MAX8997
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 890481c..ff4ff2c 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_LEDS_NETXBIG) ? ? ? ? ? ?+= leds-netxbig.o
> ?obj-$(CONFIG_LEDS_ASIC3) ? ? ? ? ? ? ? += leds-asic3.o
> ?obj-$(CONFIG_LEDS_RENESAS_TPU) ? ? ? ? += leds-renesas-tpu.o
> ?obj-$(CONFIG_LEDS_MAX8997) ? ? ? ? ? ? += leds-max8997.o
> +obj-$(CONFIG_LEDS_MAX77693) ? ? ? ? ? ?+= leds-max77693.o
>
> ?# LED SPI Drivers
> ?obj-$(CONFIG_LEDS_DAC124S085) ? ? ? ? ?+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
> new file mode 100644
> index 0000000..dee8f59
> --- /dev/null
> +++ b/drivers/leds/leds-max77693.c
> @@ -0,0 +1,301 @@
> +/*
> + * LED driver for Maxim MAX77693 - leds-max77673.c
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + * ByungChang Cha <[email protected]>
> + * Jonghwa Lee <[email protected]>
> + *
> + * This program is not provided / owned by Maxim Integrated Products.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/leds.h>
> +#include <linux/workqueue.h>
> +#include <linux/spinlock.h>
> +#include <linux/slab.h>
> +#include <linux/mfd/max77693.h>
> +#include <linux/mfd/max77693-private.h>
Looks like these 2 header files are not in mainline yet. It'd better
to submit a MFD driver like mfd-max77693 and this leds-max77693 driver
in one patchset. Otherwise this commit will cause building error.
> +#include <linux/leds-max77693.h>
Obviously most content of this header file won't be exposed to users
like platform device code in ARM world. So please move out those
register definitions and some local data struct definitions in this C
file.
Just keep platform_data struct in the leds-max77693.h and put it in
include/linux/platform_data/
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +struct max77693_led_data {
> + ? ? ? struct led_classdev led;
> + ? ? ? struct max77693_dev *max77693;
> + ? ? ? struct max77693_led *data;
> + ? ? ? struct regmap *regmap;
> + ? ? ? struct work_struct work;
> + ? ? ? struct mutex lock;
> + ? ? ? spinlock_t value_lock;
Why do you need 2 different locks here? I think just one of them is OK.
> + ? ? ? int brightness;
> +};
> +
> +static u8 led_en_mask[MAX77693_LED_MAX] = {
> + ? ? ? MAX77693_FLASH_FLED1_EN,
> + ? ? ? MAX77693_FLASH_FLED2_EN,
> + ? ? ? MAX77693_TORCH_FLED1_EN,
> + ? ? ? MAX77693_TORCH_FLED2_EN
> +};
> +
> +static u8 reg_led_timer[MAX77693_LED_MAX] = {
> + ? ? ? MAX77693_LED_REG_FLASH_TIMER,
> + ? ? ? MAX77693_LED_REG_FLASH_TIMER,
> + ? ? ? MAX77693_LED_REG_ITORCHTIMER,
> + ? ? ? MAX77693_LED_REG_ITORCHTIMER,
> +};
> +
> +static u8 reg_led_current[MAX77693_LED_MAX] = {
> + ? ? ? MAX77693_LED_REG_IFLASH1,
> + ? ? ? MAX77693_LED_REG_IFLASH2,
> + ? ? ? MAX77693_LED_REG_ITORCH,
> + ? ? ? MAX77693_LED_REG_ITORCH,
> +};
> +
> +static u8 led_current_mask[MAX77693_LED_MAX] = {
> + ? ? ? MAX77693_FLASH_IOUT1,
> + ? ? ? MAX77693_FLASH_IOUT2,
> + ? ? ? MAX77693_TORCH_IOUT1,
> + ? ? ? MAX77693_TORCH_IOUT2
> +};
> +
> +static u8 led_current_shift[MAX77693_LED_MAX] = {
> + ? ? ? 0,
> + ? ? ? 0,
> + ? ? ? 0,
> + ? ? ? 4,
> +};
> +
> +static int max77693_led_get_en_value(struct max77693_led_data *led_data, int on)
> +{
> + ? ? ? if (on)
> + ? ? ? ? ? ? ? return MAX77693_FLED_I2C;
> +
> + ? ? ? if (led_data->data->cntrl_mode == MAX77693_LED_CTRL_BY_I2C)
> + ? ? ? ? ? ? ? return MAX77693_FLED_OFF;
> + ? ? ? else if (led_data->data->id < 2)
> + ? ? ? ? ? ? ? return MAX77693_FLED_FLASHEN;
> + ? ? ? else
> + ? ? ? ? ? ? ? return MAX77693_FLED_TORCHEN;
> +}
> +
> +static void max77693_led_set(struct led_classdev *led_cdev,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?enum led_brightness value)
> +{
> + ? ? ? unsigned long flags;
> + ? ? ? struct max77693_led_data *led_data
> + ? ? ? ? ? ? ? = container_of(led_cdev, struct max77693_led_data, led);
> +
> + ? ? ? pr_debug("[LED] %s\n", __func__);
please replace these pr_debug, pr_err and other similar stuff to
dev_dbg, dev_err.
> +
> + ? ? ? spin_lock_irqsave(&led_data->value_lock, flags);
> + ? ? ? led_data->brightness = min_t(int, value, MAX77693_FLASH_IOUT1);
> + ? ? ? spin_unlock_irqrestore(&led_data->value_lock, flags);
> +
This spin_lock looks useless to me, since you have mutex_lock in the
max77693_led_work. That's enough.
> + ? ? ? schedule_work(&led_data->work);
> +}
> +
> +static void led_set(struct max77693_led_data *led_data)
> +{
> + ? ? ? int ret;
> + ? ? ? struct max77693_led *data = led_data->data;
> + ? ? ? int id = data->id;
> + ? ? ? u8 mask;
> + ? ? ? u8 shift = led_current_shift[id];
> + ? ? ? int value;
> +
> + ? ? ? ? ? ? ? value = max77693_led_get_en_value(led_data, 0);
> + ? ? ? ? ? ? ? mask = led_en_mask[id];
> + ? ? ? ? ? ? ? ret = regmap_update_bits(led_data->regmap,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? MAX77693_LED_REG_FLASH_EN,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? led_en_mask[id],
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? value << (ffs(led_en_mask[id]) - 1));
> + ? ? ? ? ? ? ? if (unlikely(ret))
> + ? ? ? ? ? ? ? ? ? ? ? goto error_set_bits;
> +
> + ? ? ? ? ? ? ? ret = regmap_update_bits(led_data->regmap,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? reg_led_current[id],
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? led_current_mask[id],
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? led_data->brightness << shift);
> + ? ? ? ? ? ? ? if (unlikely(ret))
> + ? ? ? ? ? ? ? ? ? ? ? goto error_set_bits;
> +
> + ? ? ? ? ? ? ? return;
> +
Indent is wrong in above section.
> +error_set_bits:
> + ? ? ? pr_err("%s: can't set led level %d\n", __func__, ret);
> + ? ? ? return;
> +}
> +
> +static void max77693_led_work(struct work_struct *work)
> +{
> + ? ? ? struct max77693_led_data *led_data
> + ? ? ? ? ? ? ? = container_of(work, struct max77693_led_data, work);
> +
> + ? ? ? pr_debug("[LED] %s\n", __func__);
> +
> + ? ? ? mutex_lock(&led_data->lock);
> + ? ? ? led_set(led_data);
> + ? ? ? mutex_unlock(&led_data->lock);
> +}
> +
> +static int max77693_led_setup(struct max77693_led_data *led_data)
> +{
> + ? ? ? int ret = 0;
> + ? ? ? struct max77693_led *data = led_data->data;
> + ? ? ? int id = data->id;
> + ? ? ? int value;
> +
> + ? ? ? ret |= regmap_write(led_data->regmap, MAX77693_LED_REG_VOUT_CNTL,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? MAX77693_BOOST_FLASH_FLEDNUM_2
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | MAX77693_BOOST_FLASH_MODE_BOTH);
> + ? ? ? ret |= regmap_write(led_data->regmap, MAX77693_LED_REG_VOUT_FLASH1,
> + ? ? ? ? ? ? ? ? ? ? ? ? MAX77693_BOOST_VOUT_FLASH_FROM_VOLT(5000));
> + ? ? ? ret |= regmap_write(led_data->regmap,
> + ? ? ? ? ? ? ? ? ? ? ? MAX77693_LED_REG_MAX_FLASH1, 0xEC);
> + ? ? ? ret |= regmap_write(led_data->regmap,
> + ? ? ? ? ? ? ? ? ? ? ? MAX77693_LED_REG_MAX_FLASH2, 0x00);
> +
> + ? ? ? value = max77693_led_get_en_value(led_data, 0);
> +
> + ? ? ? ret |= regmap_update_bits(led_data->regmap,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?MAX77693_LED_REG_FLASH_EN,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?led_en_mask[id],
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?value << (ffs(led_en_mask[id]) - 1));
> +
> + ? ? ? /* Set TORCH_TMR_DUR or FLASH_TMR_DUR */
> + ? ? ? if (id < 2) {
> + ? ? ? ? ? ? ? ret |= regmap_write(led_data->regmap, reg_led_timer[id],
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? (data->timer | data->timer_mode << 7));
> + ? ? ? } else {
> + ? ? ? ? ? ? ? ret |= regmap_write(led_data->regmap, reg_led_timer[id],
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 0xC0);
> + ? ? ? }
> +
> + ? ? ? /* Set current */
> + ? ? ? ret |= regmap_update_bits(led_data->regmap, reg_led_current[id],
> + ? ? ? ? ? ? ? ? ? ? ? led_current_mask[id],
> + ? ? ? ? ? ? ? ? ? ? ? led_data->brightness << led_current_shift[id]);
> +
> + ? ? ? return ret;
> +}
> +
> +static int max77693_led_probe(struct platform_device *pdev)
> +{
> + ? ? ? struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
> + ? ? ? struct max77693_platform_data *max77693_pdata
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? = dev_get_platdata(max77693->dev);
> + ? ? ? struct max77693_led_platform_data *pdata;
> + ? ? ? struct max77693_led *data;
> + ? ? ? struct max77693_led_data *led_data;
> + ? ? ? struct max77693_led_data **led_datas;
We got 5 "data" here, Can we choose better name?
> + ? ? ? int ret = 0;
> + ? ? ? int i;
> +
> + ? ? ? if (max77693_pdata->led_data) {
> + ? ? ? ? ? ? ? pdata = max77693_pdata->led_data;
> + ? ? ? } else {
> + ? ? ? ? ? ? ? pr_err("%s : No plaform data\n", __func__);
> + ? ? ? ? ? ? ? return -ENODEV;
> + ? ? ? }
> +
This is not beautiful.
struct max77693_led_platform_data *pdata = max77693_pdata->led_data;
if (!pdata) {
dev_err(...);
return -ENODEV;
}
> + ? ? ? led_datas = devm_kzalloc(max77693->dev,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? sizeof(struct max77693_led_data *)
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? * MAX77693_LED_MAX, GFP_KERNEL);
> + ? ? ? if (unlikely(!led_datas)) {
> + ? ? ? ? ? ? ? pr_err("[LED] memory allocation error %s\n", __func__);
> + ? ? ? ? ? ? ? return -ENOMEM;
> + ? ? ? }
> +
Why not just use a static pointer array like
static struct max77693_led_data *led_datas[MAX77693_LED_MAX];
Actually, I think this led_datas is totally useless. You can add
"struct max77693_led_data *led_data" in "struct max77693_led".
Then you can access every led_data like "pdata->leds[i]->led_data"
And where is the definition of MAX77693_LED_MAX, I guess it equals 4.
But it is missing in this patch, which cause kernel can't be built.
> + ? ? ? platform_set_drvdata(pdev, led_datas);
> +
> + ? ? ? for (i = 0; i < pdata->num_leds; i++) {
> + ? ? ? ? ? ? ? data = &(pdata->leds[i]);
> + ? ? ? ? ? ? ? led_data = devm_kzalloc(max77693->dev,
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? sizeof(struct max77693_led_data),
> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? GFP_KERNEL);
> + ? ? ? ? ? ? ? led_datas[i] = led_data;
> + ? ? ? ? ? ? ? if (unlikely(!led_data)) {
> + ? ? ? ? ? ? ? ? ? ? ? pr_err("[LED] memory allocation error %s\n", __func__);
> + ? ? ? ? ? ? ? ? ? ? ? ret = -ENOMEM;
> + ? ? ? ? ? ? ? ? ? ? ? continue;
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? led_data->max77693 = max77693;
> + ? ? ? ? ? ? ? led_data->regmap = max77693->regmap;
> + ? ? ? ? ? ? ? led_data->data = data;
> + ? ? ? ? ? ? ? led_data->led.name = data->name;
> + ? ? ? ? ? ? ? led_data->led.brightness_set = max77693_led_set;
> + ? ? ? ? ? ? ? led_data->led.brightness = LED_OFF;
> + ? ? ? ? ? ? ? led_data->brightness = data->brightness;
> + ? ? ? ? ? ? ? led_data->led.flags = LED_CORE_SUSPENDRESUME;
> + ? ? ? ? ? ? ? led_data->led.max_brightness = data->id < 2
> + ? ? ? ? ? ? ? ? ? ? ? ? MAX_FLASH_DRV_LEVEL : MAX_TORCH_DRV_LEVEL;
> +
> + ? ? ? ? ? ? ? mutex_init(&led_data->lock);
> + ? ? ? ? ? ? ? spin_lock_init(&led_data->value_lock);
> + ? ? ? ? ? ? ? INIT_WORK(&led_data->work, max77693_led_work);
> +
> + ? ? ? ? ? ? ? ret = led_classdev_register(&pdev->dev, &led_data->led);
> + ? ? ? ? ? ? ? if (unlikely(ret)) {
> + ? ? ? ? ? ? ? ? ? ? ? pr_err("unable to register LED\n");
> + ? ? ? ? ? ? ? ? ? ? ? ret = -EFAULT;
> + ? ? ? ? ? ? ? ? ? ? ? continue;
> + ? ? ? ? ? ? ? }
> +
> + ? ? ? ? ? ? ? ret = max77693_led_setup(led_data);
> + ? ? ? ? ? ? ? if (unlikely(ret)) {
> + ? ? ? ? ? ? ? ? ? ? ? pr_err("unable to register LED\n");
I think this message is a copy&paste from upper lines and meaningless here.
> + ? ? ? ? ? ? ? ? ? ? ? led_classdev_unregister(&led_data->led);
> + ? ? ? ? ? ? ? ? ? ? ? ret = -EFAULT;
> + ? ? ? ? ? ? ? }
> + ? ? ? }
> + ? ? ? return ret;
> +}
> +
> +static int __devexit max77693_led_remove(struct platform_device *pdev)
> +{
> + ? ? ? struct max77693_led_data **led_datas = platform_get_drvdata(pdev);
> + ? ? ? int i;
> +
> + ? ? ? for (i = 0; i != MAX77693_LED_MAX; ++i) {
> + ? ? ? ? ? ? ? if (led_datas[i] == NULL)
> + ? ? ? ? ? ? ? ? ? ? ? continue;
> +
> + ? ? ? ? ? ? ? cancel_work_sync(&led_datas[i]->work);
> + ? ? ? ? ? ? ? mutex_destroy(&led_datas[i]->lock);
> + ? ? ? ? ? ? ? led_classdev_unregister(&led_datas[i]->led);
> + ? ? ? }
> +
> + ? ? ? return 0;
> +}
> +
> +static struct platform_driver max77693_led_driver = {
> + ? ? ? .probe ? ? ? ? ?= max77693_led_probe,
> + ? ? ? .remove ? ? ? ? = __devexit_p(max77693_led_remove),
> + ? ? ? .driver ? ? ? ? = {
> + ? ? ? ? ? ? ? .name ? = "max77693-led",
> + ? ? ? ? ? ? ? .owner ?= THIS_MODULE,
> + ? ? ? },
> +};
> +
> +static int __init max77693_led_init(void)
> +{
> + ? ? ? return platform_driver_register(&max77693_led_driver);
> +}
> +module_init(max77693_led_init);
> +
> +static void __exit max77693_led_exit(void)
> +{
> + ? ? ? platform_driver_unregister(&max77693_led_driver);
> +}
> +module_exit(max77693_led_exit);
> +
> +MODULE_AUTHOR("ByungChang Cha <[email protected]>");
> +MODULE_DESCRIPTION("MAX77693 LED driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/leds-max77693.h b/include/linux/leds-max77693.h
> new file mode 100644
> index 0000000..a50a120
> --- /dev/null
> +++ b/include/linux/leds-max77693.h
> @@ -0,0 +1,154 @@
> +/*
> + * leds-max77693.h - Flash-led driver for Maxim MAX77693
> + *
> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> + * ByungChang Cha <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __LEDS_MAX77693_H__
> +#define __LEDS_MAX77693_H__
> +
> +/* MAX77693_IFLASH1 */
> +#define MAX77693_FLASH_IOUT1 ? ? ? ? ? 0x3F
> +
> +/* MAX77693_IFLASH2 */
> +#define MAX77693_FLASH_IOUT2 ? ? ? ? ? 0x3F
> +
> +/* MAX77693_ITORCH */
> +#define MAX77693_TORCH_IOUT1 ? ? ? ? ? 0x0F
> +#define MAX77693_TORCH_IOUT2 ? ? ? ? ? 0xF0
> +
> +/* MAX77693_TORCH_TIMER */
> +#define MAX77693_TORCH_TMR_DUR ? ? ? ? 0x0F
> +#define MAX77693_DIS_TORCH_TMR ? ? ? ? 0x40
> +#define MAX77693_TORCH_TMR_MODE ? ? ? ? ? ? ? ?0x80
> +#define MAX77693_TORCH_TMR_MODE_ONESHOT ? ? ? ?0x00
> +#define MAX77693_TORCH_TMR_MDOE_MAXTIMER ? ? ? 0x01
> +
> +/* MAX77693_FLASH_TIMER */
> +#define MAX77693_FLASH_TMR_DUR ? ? ? ? 0x0F
> +#define MAX77693_FLASH_TMR_MODE ? ? ? ? ? ? ? ?0x80
> +/* MAX77693_FLASH_TMR_MODE value */
> +#define MAX77693_FLASH_TMR_MODE_ONESHOT ? ? ? ?0x00
> +#define MAX77693_FLASH_TMR_MDOE_MAXTIMER ? ? ? 0x01
> +
> +/* MAX77693_FLASH_EN */
> +#define MAX77693_TORCH_FLED2_EN ? ? ? ? ? ? ? ?0x03
> +#define MAX77693_TORCH_FLED1_EN ? ? ? ? ? ? ? ?0x0C
> +#define MAX77693_FLASH_FLED2_EN ? ? ? ? ? ? ? ?0x30
> +#define MAX77693_FLASH_FLED1_EN ? ? ? ? ? ? ? ?0xC0
> +/* MAX77693 FLEDx_EN value */
> +#define MAX77693_FLED_OFF ? ? ? ? ? ? ?0x00
> +#define MAX77693_FLED_FLASHEN ? ? ? ? ?0x01
> +#define MAX77693_FLED_TORCHEN ? ? ? ? ?0x02
> +#define MAX77693_FLED_I2C ? ? ? ? ? ? ?0X03
> +
> +/* MAX77693_VOUT_CNTL */
> +#define MAX77693_BOOST_FLASH_MODE ? ? ?0x07
> +#define MAX77693_BOOST_FLASH_FLEDNUM ? 0x80
> +/* MAX77693_BOOST_FLASH_MODE vaule*/
> +#define MAX77693_BOOST_FLASH_MODE_OFF ?0x00
> +#define MAX77693_BOOST_FLASH_MODE_FLED1 ? ? ? ?0x01
> +#define MAX77693_BOOST_FLASH_MODE_FLED2 ? ? ? ?0x02
> +#define MAX77693_BOOST_FLASH_MODE_BOTH 0x03
> +#define MAX77693_BOOST_FLASH_MODE_FIXED ? ? ? ?0x04
> +/* MAX77693_BOOST_FLASH_FLEDNUM vaule*/
> +#define MAX77693_BOOST_FLASH_FLEDNUM_1 0x00
> +#define MAX77693_BOOST_FLASH_FLEDNUM_2 0x80
> +
> +/* MAX77693_VOUT_FLASH1 */
> +#define MAX77693_BOOST_VOUT_FLASH ? ? ?0x7F
> +#define MAX77693_BOOST_VOUT_FLASH_FROM_VOLT(mV) ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?\
> + ? ? ? ? ? ? ? ((mV) <= 3300 ? 0x00 : ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?\
> + ? ? ? ? ? ? ? ((mV) <= 5500 ? (((mV) - 3300) / 25 + 0x0C) : 0x7F))
> +
> +#define MAX_FLASH_CURRENT ? ? ?1000 ? ?/* 1000mA(0x1f) */
> +#define MAX_TORCH_CURRENT ? ? ?250 ? ? /* 250mA(0x0f) */
> +#define MAX_FLASH_DRV_LEVEL ? ?63 ? ? ?/* 15.625 + 15.625*63 mA */
> +#define MAX_TORCH_DRV_LEVEL ? ?15 ? ? ?/* 15.625 + 15.625*15 mA */
> +
> +enum max77693_led_id
> +{
> + ? ? ? MAX77693_FLASH_LED_1,
> + ? ? ? MAX77693_FLASH_LED_2,
> + ? ? ? MAX77693_TORCH_LED_1,
> + ? ? ? MAX77693_TORCH_LED_2,
> + ? ? ? MAX77693_LED_MAX,
> +};
> +
> +enum max77693_led_time
> +{
> + ? ? ? MAX77693_FLASH_TIME_62P5MS,
> + ? ? ? MAX77693_FLASH_TIME_125MS,
> + ? ? ? MAX77693_FLASH_TIME_187P5MS,
> + ? ? ? MAX77693_FLASH_TIME_250MS,
> + ? ? ? MAX77693_FLASH_TIME_312P5MS,
> + ? ? ? MAX77693_FLASH_TIME_375MS,
> + ? ? ? MAX77693_FLASH_TIME_437P5MS,
> + ? ? ? MAX77693_FLASH_TIME_500MS,
> + ? ? ? MAX77693_FLASH_TIME_562P5MS,
> + ? ? ? MAX77693_FLASH_TIME_625MS,
> + ? ? ? MAX77693_FLASH_TIME_687P5MS,
> + ? ? ? MAX77693_FLASH_TIME_750MS,
> + ? ? ? MAX77693_FLASH_TIME_812P5MS,
> + ? ? ? MAX77693_FLASH_TIME_875MS,
> + ? ? ? MAX77693_FLASH_TIME_937P5MS,
> + ? ? ? MAX77693_FLASH_TIME_1000MS,
> + ? ? ? MAX77693_FLASH_TIME_MAX,
> +};
> +
> +enum max77693_torch_time
> +{
> + ? ? ? MAX77693_TORCH_TIME_262MS,
> + ? ? ? MAX77693_TORCH_TIME_524MS,
> + ? ? ? MAX77693_TORCH_TIME_786MS,
> + ? ? ? MAX77693_TORCH_TIME_1048MS,
> + ? ? ? MAX77693_TORCH_TIME_1572MS,
> + ? ? ? MAX77693_TORCH_TIME_2096MS,
> + ? ? ? MAX77693_TORCH_TIME_2620MS,
> + ? ? ? MAX77693_TORCH_TIME_3114MS,
> + ? ? ? MAX77693_TORCH_TIME_4193MS,
> + ? ? ? MAX77693_TORCH_TIME_5242MS,
> + ? ? ? MAX77693_TORCH_TIME_6291MS,
> + ? ? ? MAX77693_TORCH_TIME_7340MS,
> + ? ? ? MAX77693_TORCH_TIME_9437MS,
> + ? ? ? MAX77693_TORCH_TIME_11534MS,
> + ? ? ? MAX77693_TORCH_TIME_13631MS,
> + ? ? ? MAX77693_TORCH_TIME_15728MS,
> + ? ? ? MAX77693_TORCH_TIME_MAX,
> +};
> +
> +enum max77693_timer_mode
> +{
> + ? ? ? MAX77693_TIMER_MODE_ONE_SHOT,
> + ? ? ? MAX77693_TIMER_MODE_MAX_TIMER,
> +};
> +
> +enum max77693_led_cntrl_mode
> +{
> + ? ? ? MAX77693_LED_CTRL_BY_FLASHSTB,
> + ? ? ? MAX77693_LED_CTRL_BY_I2C,
> +};
> +
I think all above can be moved to C file.
> +struct max77693_led
> +{
> + ? ? ? const char ? ? ? ? ? ? ? ? ? ? ?*name;
> + ? ? ? const char ? ? ? ? ? ? ? ? ? ? ?*default_trigger;
> + ? ? ? int ? ? ? ? ? ? ? ? ? ? ? ? ? ? id;
> + ? ? ? int ? ? ? ? ? ? ? ? ? ? ? ? ? ? timer;
> + ? ? ? int ? ? ? ? ? ? ? ? ? ? ? ? ? ? brightness;
> + ? ? ? enum max77693_timer_mode ? ? ? ?timer_mode;
> + ? ? ? enum max77693_led_cntrl_mode ? ?cntrl_mode;
> +};
> +
> +struct max77693_led_platform_data
> +{
> + ? ? ? int num_leds;
> + ? ? ? struct max77693_led leds[MAX77693_LED_MAX];
> +};
> +
> +#endif
> --
> 1.7.4.1
>
Thanks,
-Bryan
Hi Bryan,
On 2012년 05월 25일 23:26, Bryan Wu wrote:
> Hi Jonghwa,
>
> [PATCH] leds: MAX77693: Add MAX77694 LED driver
>
> The subject is inconsistent, please change it to
> "[PATCH] leds: Add MAX77693 LED driver"
>
> On Fri, May 25, 2012 at 4:19 PM, Jonghwa Lee <[email protected]> wrote:
>> This patch is initial support for max77693 led driver.
>> MAX77693 has 2 FLEDS, and 2 modes, FLASH/TORCH. It can be set up brightness,
>> opeation, flash timer by platform data, and especially brightness can be modified
>> by led API either. This driver uses regmap to access to its register.
>>
>> Signed-off-by: Jonghwa LEE <[email protected]>
>> Signed-off-by: MyungJoo Ham <[email protected]>
>> Signed-off-by: Kyungmin Park <[email protected]>
>> ---
>> drivers/leds/Kconfig | 8 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-max77693.c | 301 +++++++++++++++++++++++++++++++++++++++++
>> include/linux/leds-max77693.h | 154 +++++++++++++++++++++
>> 4 files changed, 464 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/leds/leds-max77693.c
>> create mode 100644 include/linux/leds-max77693.h
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index ff4b8cf..6a644df 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -387,6 +387,14 @@ config LEDS_TCA6507
>> LED driver chips accessed via the I2C bus.
>> Driver support brightness control and hardware-assisted blinking.
>>
>> +config LEDS_MAX77693
>> + bool "LED support for the MAX77693"
>
> Can this driver be module? if yes, it should be "tristate".
Okay, I'll modify it.
>
>> + depends on LEDS_CLASS
>> + depends on MFD_MAX77693
>
> It can be "depends on LEDS_CLASS && MFD_MAX77693" as others
>
>> + default y
>
> I don't think this default is necessary here.
Yes, you're right.
>
>> + help
>> + This option enables support for the LEDs on the MAX77693.
>> +
>> config LEDS_MAX8997
>> tristate "LED support for MAX8997 PMIC"
>> depends on LEDS_CLASS && MFD_MAX8997
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 890481c..ff4ff2c 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -45,6 +45,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
>> obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
>> obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
>> obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
>> +obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
>>
>> # LED SPI Drivers
>> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
>> diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
>> new file mode 100644
>> index 0000000..dee8f59
>> --- /dev/null
>> +++ b/drivers/leds/leds-max77693.c
>> @@ -0,0 +1,301 @@
>> +/*
>> + * LED driver for Maxim MAX77693 - leds-max77673.c
>> + *
>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>> + * ByungChang Cha <[email protected]>
>> + * Jonghwa Lee <[email protected]>
>> + *
>> + * This program is not provided / owned by Maxim Integrated Products.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/init.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/leds.h>
>> +#include <linux/workqueue.h>
>> +#include <linux/spinlock.h>
>> +#include <linux/slab.h>
>> +#include <linux/mfd/max77693.h>
>> +#include <linux/mfd/max77693-private.h>
>
> Looks like these 2 header files are not in mainline yet. It'd better
> to submit a MFD driver like mfd-max77693 and this leds-max77693 driver
> in one patchset. Otherwise this commit will cause building error.
>
Sorry, I missed to notify it in patch description.
MAX77693 mfd driver is updated on mfd-2.6/for-next branch.
>> +#include <linux/leds-max77693.h>
>
> Obviously most content of this header file won't be exposed to users
> like platform device code in ARM world. So please move out those
> register definitions and some local data struct definitions in this C
> file.
> Just keep platform_data struct in the leds-max77693.h and put it in
> include/linux/platform_data/
>
Okay, I'll do so.
>> +#include <linux/module.h>
>> +#include <linux/regmap.h>
>> +
>> +struct max77693_led_data {
>> + struct led_classdev led;
>> + struct max77693_dev *max77693;
>> + struct max77693_led *data;
>> + struct regmap *regmap;
>> + struct work_struct work;
>> + struct mutex lock;
>> + spinlock_t value_lock;
>
> Why do you need 2 different locks here? I think just one of them is OK.
>
Okay,
>> + int brightness;
>> +};
>> +
>> +static u8 led_en_mask[MAX77693_LED_MAX] = {
>> + MAX77693_FLASH_FLED1_EN,
>> + MAX77693_FLASH_FLED2_EN,
>> + MAX77693_TORCH_FLED1_EN,
>> + MAX77693_TORCH_FLED2_EN
>> +};
>> +
>> +static u8 reg_led_timer[MAX77693_LED_MAX] = {
>> + MAX77693_LED_REG_FLASH_TIMER,
>> + MAX77693_LED_REG_FLASH_TIMER,
>> + MAX77693_LED_REG_ITORCHTIMER,
>> + MAX77693_LED_REG_ITORCHTIMER,
>> +};
>> +
>> +static u8 reg_led_current[MAX77693_LED_MAX] = {
>> + MAX77693_LED_REG_IFLASH1,
>> + MAX77693_LED_REG_IFLASH2,
>> + MAX77693_LED_REG_ITORCH,
>> + MAX77693_LED_REG_ITORCH,
>> +};
>> +
>> +static u8 led_current_mask[MAX77693_LED_MAX] = {
>> + MAX77693_FLASH_IOUT1,
>> + MAX77693_FLASH_IOUT2,
>> + MAX77693_TORCH_IOUT1,
>> + MAX77693_TORCH_IOUT2
>> +};
>> +
>> +static u8 led_current_shift[MAX77693_LED_MAX] = {
>> + 0,
>> + 0,
>> + 0,
>> + 4,
>> +};
>> +
>> +static int max77693_led_get_en_value(struct max77693_led_data *led_data, int on)
>> +{
>> + if (on)
>> + return MAX77693_FLED_I2C;
>> +
>> + if (led_data->data->cntrl_mode == MAX77693_LED_CTRL_BY_I2C)
>> + return MAX77693_FLED_OFF;
>> + else if (led_data->data->id < 2)
>> + return MAX77693_FLED_FLASHEN;
>> + else
>> + return MAX77693_FLED_TORCHEN;
>> +}
>> +
>> +static void max77693_led_set(struct led_classdev *led_cdev,
>> + enum led_brightness value)
>> +{
>> + unsigned long flags;
>> + struct max77693_led_data *led_data
>> + = container_of(led_cdev, struct max77693_led_data, led);
>> +
>> + pr_debug("[LED] %s\n", __func__);
>
> please replace these pr_debug, pr_err and other similar stuff to
> dev_dbg, dev_err.
I'll replace it.
>
>> +
>> + spin_lock_irqsave(&led_data->value_lock, flags);
>> + led_data->brightness = min_t(int, value, MAX77693_FLASH_IOUT1);
>> + spin_unlock_irqrestore(&led_data->value_lock, flags);
>> +
>
> This spin_lock looks useless to me, since you have mutex_lock in the
> max77693_led_work. That's enough.
>
Okay,
>> + schedule_work(&led_data->work);
>> +}
>> +
>> +static void led_set(struct max77693_led_data *led_data)
>> +{
>> + int ret;
>> + struct max77693_led *data = led_data->data;
>> + int id = data->id;
>> + u8 mask;
>> + u8 shift = led_current_shift[id];
>> + int value;
>> +
>> + value = max77693_led_get_en_value(led_data, 0);
>> + mask = led_en_mask[id];
>> + ret = regmap_update_bits(led_data->regmap,
>> + MAX77693_LED_REG_FLASH_EN,
>> + led_en_mask[id],
>> + value << (ffs(led_en_mask[id]) - 1));
>> + if (unlikely(ret))
>> + goto error_set_bits;
>> +
>> + ret = regmap_update_bits(led_data->regmap,
>> + reg_led_current[id],
>> + led_current_mask[id],
>> + led_data->brightness << shift);
>> + if (unlikely(ret))
>> + goto error_set_bits;
>> +
>> + return;
>> +
> Indent is wrong in above section.
>
>
>> +error_set_bits:
>> + pr_err("%s: can't set led level %d\n", __func__, ret);
>> + return;
>> +}
>> +
>> +static void max77693_led_work(struct work_struct *work)
>> +{
>> + struct max77693_led_data *led_data
>> + = container_of(work, struct max77693_led_data, work);
>> +
>> + pr_debug("[LED] %s\n", __func__);
>> +
>> + mutex_lock(&led_data->lock);
>> + led_set(led_data);
>> + mutex_unlock(&led_data->lock);
>> +}
>> +
>> +static int max77693_led_setup(struct max77693_led_data *led_data)
>> +{
>> + int ret = 0;
>> + struct max77693_led *data = led_data->data;
>> + int id = data->id;
>> + int value;
>> +
>> + ret |= regmap_write(led_data->regmap, MAX77693_LED_REG_VOUT_CNTL,
>> + MAX77693_BOOST_FLASH_FLEDNUM_2
>> + | MAX77693_BOOST_FLASH_MODE_BOTH);
>> + ret |= regmap_write(led_data->regmap, MAX77693_LED_REG_VOUT_FLASH1,
>> + MAX77693_BOOST_VOUT_FLASH_FROM_VOLT(5000));
>> + ret |= regmap_write(led_data->regmap,
>> + MAX77693_LED_REG_MAX_FLASH1, 0xEC);
>> + ret |= regmap_write(led_data->regmap,
>> + MAX77693_LED_REG_MAX_FLASH2, 0x00);
>> +
>> + value = max77693_led_get_en_value(led_data, 0);
>> +
>> + ret |= regmap_update_bits(led_data->regmap,
>> + MAX77693_LED_REG_FLASH_EN,
>> + led_en_mask[id],
>> + value << (ffs(led_en_mask[id]) - 1));
>> +
>> + /* Set TORCH_TMR_DUR or FLASH_TMR_DUR */
>> + if (id < 2) {
>> + ret |= regmap_write(led_data->regmap, reg_led_timer[id],
>> + (data->timer | data->timer_mode << 7));
>> + } else {
>> + ret |= regmap_write(led_data->regmap, reg_led_timer[id],
>> + 0xC0);
>> + }
>> +
>> + /* Set current */
>> + ret |= regmap_update_bits(led_data->regmap, reg_led_current[id],
>> + led_current_mask[id],
>> + led_data->brightness << led_current_shift[id]);
>> +
>> + return ret;
>> +}
>> +
>> +static int max77693_led_probe(struct platform_device *pdev)
>> +{
>> + struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
>> + struct max77693_platform_data *max77693_pdata
>> + = dev_get_platdata(max77693->dev);
>> + struct max77693_led_platform_data *pdata;
>> + struct max77693_led *data;
>> + struct max77693_led_data *led_data;
>> + struct max77693_led_data **led_datas;
>
> We got 5 "data" here, Can we choose better name?
>
Okay, I'll consider it.
>> + int ret = 0;
>> + int i;
>> +
>> + if (max77693_pdata->led_data) {
>> + pdata = max77693_pdata->led_data;
>> + } else {
>> + pr_err("%s : No plaform data\n", __func__);
>> + return -ENODEV;
>> + }
>> +
>
> This is not beautiful.
>
> struct max77693_led_platform_data *pdata = max77693_pdata->led_data;
>
> if (!pdata) {
> dev_err(...);
> return -ENODEV;
> }
>
>> + led_datas = devm_kzalloc(max77693->dev,
>> + sizeof(struct max77693_led_data *)
>> + * MAX77693_LED_MAX, GFP_KERNEL);
>> + if (unlikely(!led_datas)) {
>> + pr_err("[LED] memory allocation error %s\n", __func__);
>> + return -ENOMEM;
>> + }
>> +
>
> Why not just use a static pointer array like
> static struct max77693_led_data *led_datas[MAX77693_LED_MAX];
> Actually, I think this led_datas is totally useless. You can add
> "struct max77693_led_data *led_data" in "struct max77693_led".
> Then you can access every led_data like "pdata->leds[i]->led_data"
>
Okay, I'll apply it.
> And where is the definition of MAX77693_LED_MAX, I guess it equals 4.
> But it is missing in this patch, which cause kernel can't be built.
>
>> + platform_set_drvdata(pdev, led_datas);
>> +
>> + for (i = 0; i < pdata->num_leds; i++) {
>> + data = &(pdata->leds[i]);
>> + led_data = devm_kzalloc(max77693->dev,
>> + sizeof(struct max77693_led_data),
>> + GFP_KERNEL);
>> + led_datas[i] = led_data;
>> + if (unlikely(!led_data)) {
>> + pr_err("[LED] memory allocation error %s\n", __func__);
>> + ret = -ENOMEM;
>> + continue;
>> + }
>> +
>> + led_data->max77693 = max77693;
>> + led_data->regmap = max77693->regmap;
>> + led_data->data = data;
>> + led_data->led.name = data->name;
>> + led_data->led.brightness_set = max77693_led_set;
>> + led_data->led.brightness = LED_OFF;
>> + led_data->brightness = data->brightness;
>> + led_data->led.flags = LED_CORE_SUSPENDRESUME;
>> + led_data->led.max_brightness = data->id < 2
>> + ? MAX_FLASH_DRV_LEVEL : MAX_TORCH_DRV_LEVEL;
>> +
>> + mutex_init(&led_data->lock);
>> + spin_lock_init(&led_data->value_lock);
>> + INIT_WORK(&led_data->work, max77693_led_work);
>> +
>> + ret = led_classdev_register(&pdev->dev, &led_data->led);
>> + if (unlikely(ret)) {
>> + pr_err("unable to register LED\n");
>> + ret = -EFAULT;
>> + continue;
>> + }
>> +
>> + ret = max77693_led_setup(led_data);
>> + if (unlikely(ret)) {
>> + pr_err("unable to register LED\n");
>
> I think this message is a copy&paste from upper lines and meaningless here.
>
Okay, I'll fix it.
>> + led_classdev_unregister(&led_data->led);
>> + ret = -EFAULT;
>> + }
>> + }
>> + return ret;
>> +}
>> +
>> +static int __devexit max77693_led_remove(struct platform_device *pdev)
>> +{
>> + struct max77693_led_data **led_datas = platform_get_drvdata(pdev);
>> + int i;
>> +
>> + for (i = 0; i != MAX77693_LED_MAX; ++i) {
>> + if (led_datas[i] == NULL)
>> + continue;
>> +
>> + cancel_work_sync(&led_datas[i]->work);
>> + mutex_destroy(&led_datas[i]->lock);
>> + led_classdev_unregister(&led_datas[i]->led);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_driver max77693_led_driver = {
>> + .probe = max77693_led_probe,
>> + .remove = __devexit_p(max77693_led_remove),
>> + .driver = {
>> + .name = "max77693-led",
>> + .owner = THIS_MODULE,
>> + },
>> +};
>> +
>> +static int __init max77693_led_init(void)
>> +{
>> + return platform_driver_register(&max77693_led_driver);
>> +}
>> +module_init(max77693_led_init);
>> +
>> +static void __exit max77693_led_exit(void)
>> +{
>> + platform_driver_unregister(&max77693_led_driver);
>> +}
>> +module_exit(max77693_led_exit);
>> +
>> +MODULE_AUTHOR("ByungChang Cha <[email protected]>");
>> +MODULE_DESCRIPTION("MAX77693 LED driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/include/linux/leds-max77693.h b/include/linux/leds-max77693.h
>> new file mode 100644
>> index 0000000..a50a120
>> --- /dev/null
>> +++ b/include/linux/leds-max77693.h
>> @@ -0,0 +1,154 @@
>> +/*
>> + * leds-max77693.h - Flash-led driver for Maxim MAX77693
>> + *
>> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
>> + * ByungChang Cha <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef __LEDS_MAX77693_H__
>> +#define __LEDS_MAX77693_H__
>> +
>> +/* MAX77693_IFLASH1 */
>> +#define MAX77693_FLASH_IOUT1 0x3F
>> +
>> +/* MAX77693_IFLASH2 */
>> +#define MAX77693_FLASH_IOUT2 0x3F
>> +
>> +/* MAX77693_ITORCH */
>> +#define MAX77693_TORCH_IOUT1 0x0F
>> +#define MAX77693_TORCH_IOUT2 0xF0
>> +
>> +/* MAX77693_TORCH_TIMER */
>> +#define MAX77693_TORCH_TMR_DUR 0x0F
>> +#define MAX77693_DIS_TORCH_TMR 0x40
>> +#define MAX77693_TORCH_TMR_MODE 0x80
>> +#define MAX77693_TORCH_TMR_MODE_ONESHOT 0x00
>> +#define MAX77693_TORCH_TMR_MDOE_MAXTIMER 0x01
>> +
>> +/* MAX77693_FLASH_TIMER */
>> +#define MAX77693_FLASH_TMR_DUR 0x0F
>> +#define MAX77693_FLASH_TMR_MODE 0x80
>> +/* MAX77693_FLASH_TMR_MODE value */
>> +#define MAX77693_FLASH_TMR_MODE_ONESHOT 0x00
>> +#define MAX77693_FLASH_TMR_MDOE_MAXTIMER 0x01
>> +
>> +/* MAX77693_FLASH_EN */
>> +#define MAX77693_TORCH_FLED2_EN 0x03
>> +#define MAX77693_TORCH_FLED1_EN 0x0C
>> +#define MAX77693_FLASH_FLED2_EN 0x30
>> +#define MAX77693_FLASH_FLED1_EN 0xC0
>> +/* MAX77693 FLEDx_EN value */
>> +#define MAX77693_FLED_OFF 0x00
>> +#define MAX77693_FLED_FLASHEN 0x01
>> +#define MAX77693_FLED_TORCHEN 0x02
>> +#define MAX77693_FLED_I2C 0X03
>> +
>> +/* MAX77693_VOUT_CNTL */
>> +#define MAX77693_BOOST_FLASH_MODE 0x07
>> +#define MAX77693_BOOST_FLASH_FLEDNUM 0x80
>> +/* MAX77693_BOOST_FLASH_MODE vaule*/
>> +#define MAX77693_BOOST_FLASH_MODE_OFF 0x00
>> +#define MAX77693_BOOST_FLASH_MODE_FLED1 0x01
>> +#define MAX77693_BOOST_FLASH_MODE_FLED2 0x02
>> +#define MAX77693_BOOST_FLASH_MODE_BOTH 0x03
>> +#define MAX77693_BOOST_FLASH_MODE_FIXED 0x04
>> +/* MAX77693_BOOST_FLASH_FLEDNUM vaule*/
>> +#define MAX77693_BOOST_FLASH_FLEDNUM_1 0x00
>> +#define MAX77693_BOOST_FLASH_FLEDNUM_2 0x80
>> +
>> +/* MAX77693_VOUT_FLASH1 */
>> +#define MAX77693_BOOST_VOUT_FLASH 0x7F
>> +#define MAX77693_BOOST_VOUT_FLASH_FROM_VOLT(mV) \
>> + ((mV) <= 3300 ? 0x00 : \
>> + ((mV) <= 5500 ? (((mV) - 3300) / 25 + 0x0C) : 0x7F))
>> +
>> +#define MAX_FLASH_CURRENT 1000 /* 1000mA(0x1f) */
>> +#define MAX_TORCH_CURRENT 250 /* 250mA(0x0f) */
>> +#define MAX_FLASH_DRV_LEVEL 63 /* 15.625 + 15.625*63 mA */
>> +#define MAX_TORCH_DRV_LEVEL 15 /* 15.625 + 15.625*15 mA */
>> +
>> +enum max77693_led_id
>> +{
>> + MAX77693_FLASH_LED_1,
>> + MAX77693_FLASH_LED_2,
>> + MAX77693_TORCH_LED_1,
>> + MAX77693_TORCH_LED_2,
>> + MAX77693_LED_MAX,
>> +};
>> +
>> +enum max77693_led_time
>> +{
>> + MAX77693_FLASH_TIME_62P5MS,
>> + MAX77693_FLASH_TIME_125MS,
>> + MAX77693_FLASH_TIME_187P5MS,
>> + MAX77693_FLASH_TIME_250MS,
>> + MAX77693_FLASH_TIME_312P5MS,
>> + MAX77693_FLASH_TIME_375MS,
>> + MAX77693_FLASH_TIME_437P5MS,
>> + MAX77693_FLASH_TIME_500MS,
>> + MAX77693_FLASH_TIME_562P5MS,
>> + MAX77693_FLASH_TIME_625MS,
>> + MAX77693_FLASH_TIME_687P5MS,
>> + MAX77693_FLASH_TIME_750MS,
>> + MAX77693_FLASH_TIME_812P5MS,
>> + MAX77693_FLASH_TIME_875MS,
>> + MAX77693_FLASH_TIME_937P5MS,
>> + MAX77693_FLASH_TIME_1000MS,
>> + MAX77693_FLASH_TIME_MAX,
>> +};
>> +
>> +enum max77693_torch_time
>> +{
>> + MAX77693_TORCH_TIME_262MS,
>> + MAX77693_TORCH_TIME_524MS,
>> + MAX77693_TORCH_TIME_786MS,
>> + MAX77693_TORCH_TIME_1048MS,
>> + MAX77693_TORCH_TIME_1572MS,
>> + MAX77693_TORCH_TIME_2096MS,
>> + MAX77693_TORCH_TIME_2620MS,
>> + MAX77693_TORCH_TIME_3114MS,
>> + MAX77693_TORCH_TIME_4193MS,
>> + MAX77693_TORCH_TIME_5242MS,
>> + MAX77693_TORCH_TIME_6291MS,
>> + MAX77693_TORCH_TIME_7340MS,
>> + MAX77693_TORCH_TIME_9437MS,
>> + MAX77693_TORCH_TIME_11534MS,
>> + MAX77693_TORCH_TIME_13631MS,
>> + MAX77693_TORCH_TIME_15728MS,
>> + MAX77693_TORCH_TIME_MAX,
>> +};
>> +
>> +enum max77693_timer_mode
>> +{
>> + MAX77693_TIMER_MODE_ONE_SHOT,
>> + MAX77693_TIMER_MODE_MAX_TIMER,
>> +};
>> +
>> +enum max77693_led_cntrl_mode
>> +{
>> + MAX77693_LED_CTRL_BY_FLASHSTB,
>> + MAX77693_LED_CTRL_BY_I2C,
>> +};
>> +
>
> I think all above can be moved to C file.
>
>> +struct max77693_led
>> +{
>> + const char *name;
>> + const char *default_trigger;
>> + int id;
>> + int timer;
>> + int brightness;
>> + enum max77693_timer_mode timer_mode;
>> + enum max77693_led_cntrl_mode cntrl_mode;
>> +};
>> +
>> +struct max77693_led_platform_data
>> +{
>> + int num_leds;
>> + struct max77693_led leds[MAX77693_LED_MAX];
>> +};
>> +
>> +#endif
>> --
>> 1.7.4.1
>>
>
> Thanks,
> -Bryan
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Thank you for your advise, I'll fix it all then re-patch it.
Regards.