2012-06-20 14:30:25

by Axel Lin

[permalink] [raw]
Subject: [PATCH 1/2] regulator: tps6524x: Convert to regulator_list_voltage_table()

This patch adds fixed_5000000_voltage table for fixed voltage,
so we can convert regulator_ops to regulator_list_voltage_table.

We can differentiate fixed voltage by checking rdev->desc->n_voltages == 1,
thus remove the FIXED_VOLTAGE flag usage.

Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps6524x-regulator.c | 52 ++++++++++++--------------------
1 file changed, 19 insertions(+), 33 deletions(-)

diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index 1b299aa..48e37bd 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -111,7 +111,6 @@
#define N_REGULATORS (N_DCDC + N_LDO + N_SWITCH)

#define FIXED_ILIMSEL BIT(0)
-#define FIXED_VOLTAGE BIT(1)

#define CMD_READ(reg) ((reg) << 6)
#define CMD_WRITE(reg) (BIT(5) | (reg) << 6)
@@ -129,8 +128,7 @@ struct field {
struct supply_info {
const char *name;
int n_voltages;
- const int *voltages;
- int fixed_voltage;
+ const unsigned int *voltages;
int n_ilimsels;
const int *ilimsels;
int fixed_ilimsel;
@@ -307,7 +305,7 @@ static int write_field(struct tps6524x *hw, const struct field *field,
val << field->shift);
}

-static const int dcdc1_voltages[] = {
+static const unsigned int dcdc1_voltages[] = {
800000, 825000, 850000, 875000,
900000, 925000, 950000, 975000,
1000000, 1025000, 1050000, 1075000,
@@ -318,7 +316,7 @@ static const int dcdc1_voltages[] = {
1500000, 1525000, 1550000, 1575000,
};

-static const int dcdc2_voltages[] = {
+static const unsigned int dcdc2_voltages[] = {
1400000, 1450000, 1500000, 1550000,
1600000, 1650000, 1700000, 1750000,
1800000, 1850000, 1900000, 1950000,
@@ -329,7 +327,7 @@ static const int dcdc2_voltages[] = {
2800000, 2850000, 2900000, 2950000,
};

-static const int dcdc3_voltages[] = {
+static const unsigned int dcdc3_voltages[] = {
2400000, 2450000, 2500000, 2550000, 2600000,
2650000, 2700000, 2750000, 2800000, 2850000,
2900000, 2950000, 3000000, 3050000, 3100000,
@@ -337,20 +335,24 @@ static const int dcdc3_voltages[] = {
3400000, 3450000, 3500000, 3550000, 3600000,
};

-static const int ldo1_voltages[] = {
+static const unsigned int ldo1_voltages[] = {
4300000, 4350000, 4400000, 4450000,
4500000, 4550000, 4600000, 4650000,
4700000, 4750000, 4800000, 4850000,
4900000, 4950000, 5000000, 5050000,
};

-static const int ldo2_voltages[] = {
+static const unsigned int ldo2_voltages[] = {
1100000, 1150000, 1200000, 1250000,
1300000, 1700000, 1750000, 1800000,
1850000, 1900000, 3150000, 3200000,
3250000, 3300000, 3350000, 3400000,
};

+static const unsigned int fixed_5000000_voltage[] = {
+ 5000000
+};
+
static const int ldo_ilimsel[] = {
400000, 1500000
};
@@ -424,8 +426,8 @@ static const struct supply_info supply_info[N_REGULATORS] = {
},
{
.name = "USB",
- .flags = FIXED_VOLTAGE,
- .fixed_voltage = 5000000,
+ .n_voltages = ARRAY_SIZE(fixed_5000000_voltage),
+ .voltages = fixed_5000000_voltage,
.n_ilimsels = ARRAY_SIZE(usb_ilimsel),
.ilimsels = usb_ilimsel,
.enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
@@ -435,29 +437,15 @@ static const struct supply_info supply_info[N_REGULATORS] = {
},
{
.name = "LCD",
- .flags = FIXED_VOLTAGE | FIXED_ILIMSEL,
- .fixed_voltage = 5000000,
+ .n_voltages = ARRAY_SIZE(fixed_5000000_voltage),
+ .voltages = fixed_5000000_voltage,
+ .flags = FIXED_ILIMSEL,
.fixed_ilimsel = 400000,
.enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
BLOCK_LCD_SHIFT),
},
};

-static int list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- const struct supply_info *info;
- struct tps6524x *hw;
-
- hw = rdev_get_drvdata(rdev);
- info = &supply_info[rdev_get_id(rdev)];
-
- if (info->flags & FIXED_VOLTAGE)
- return selector ? -EINVAL : info->fixed_voltage;
-
- return ((selector < info->n_voltages) ?
- info->voltages[selector] : -EINVAL);
-}
-
static int set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
{
const struct supply_info *info;
@@ -466,7 +454,7 @@ static int set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];

- if (info->flags & FIXED_VOLTAGE)
+ if (rdev->desc->n_voltages == 1)
return -EINVAL;

return write_field(hw, &info->voltage, selector);
@@ -481,7 +469,7 @@ static int get_voltage_sel(struct regulator_dev *rdev)
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];

- if (info->flags & FIXED_VOLTAGE)
+ if (rdev->desc->n_voltages == 1)
return 0;

ret = read_field(hw, &info->voltage);
@@ -577,7 +565,7 @@ static struct regulator_ops regulator_ops = {
.disable = disable_supply,
.get_voltage_sel = get_voltage_sel,
.set_voltage_sel = set_voltage_sel,
- .list_voltage = list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.set_current_limit = set_current_limit,
.get_current_limit = get_current_limit,
};
@@ -629,13 +617,11 @@ static int __devinit pmic_probe(struct spi_device *spi)
hw->desc[i].name = info->name;
hw->desc[i].id = i;
hw->desc[i].n_voltages = info->n_voltages;
+ hw->desc[i].volt_table = info->voltages;
hw->desc[i].ops = &regulator_ops;
hw->desc[i].type = REGULATOR_VOLTAGE;
hw->desc[i].owner = THIS_MODULE;

- if (info->flags & FIXED_VOLTAGE)
- hw->desc[i].n_voltages = 1;
-
config.dev = dev;
config.init_data = init_data;
config.driver_data = hw;
--
1.7.9.5



2012-06-20 14:32:16

by Axel Lin

[permalink] [raw]
Subject: [PATCH 2/2] regulator: tps6524x: Convert fixed ilimsel to table based

This patch refactors the code to get rid of the fixed_ilimsel and FIXED_ILIMSEL
flag usage, and convert all the fixed ilimsel to table based (with one entry in
the table).

We can differentiate fixed ilimsel by checking info->n_ilimsels == 1,
thus FIXED_ILIMSEL flag can be removed.

This change makes the logic of the code simpler as all the ilimsels are table
based now.

Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/tps6524x-regulator.c | 44 +++++++++++++++++++-------------
1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c
index 48e37bd..947ece9 100644
--- a/drivers/regulator/tps6524x-regulator.c
+++ b/drivers/regulator/tps6524x-regulator.c
@@ -110,8 +110,6 @@
#define N_SWITCH 2
#define N_REGULATORS (N_DCDC + N_LDO + N_SWITCH)

-#define FIXED_ILIMSEL BIT(0)
-
#define CMD_READ(reg) ((reg) << 6)
#define CMD_WRITE(reg) (BIT(5) | (reg) << 6)
#define STAT_CLK BIT(3)
@@ -130,9 +128,7 @@ struct supply_info {
int n_voltages;
const unsigned int *voltages;
int n_ilimsels;
- const int *ilimsels;
- int fixed_ilimsel;
- int flags;
+ const unsigned int *ilimsels;
struct field enable, voltage, ilimsel;
};

@@ -353,24 +349,36 @@ static const unsigned int fixed_5000000_voltage[] = {
5000000
};

-static const int ldo_ilimsel[] = {
+static const unsigned int ldo_ilimsel[] = {
400000, 1500000
};

-static const int usb_ilimsel[] = {
+static const unsigned int usb_ilimsel[] = {
200000, 400000, 800000, 1000000
};

+static const unsigned int fixed_2400000_ilimsel[] = {
+ 2400000
+};
+
+static const unsigned int fixed_1200000_ilimsel[] = {
+ 1200000
+};
+
+static const unsigned int fixed_400000_ilimsel[] = {
+ 400000
+};
+
#define __MK_FIELD(_reg, _mask, _shift) \
{ .reg = (_reg), .mask = (_mask), .shift = (_shift), }

static const struct supply_info supply_info[N_REGULATORS] = {
{
.name = "DCDC1",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc1_voltages),
.voltages = dcdc1_voltages,
- .fixed_ilimsel = 2400000,
+ .n_ilimsels = ARRAY_SIZE(fixed_2400000_ilimsel),
+ .ilimsels = fixed_2400000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC1_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -378,10 +386,10 @@ static const struct supply_info supply_info[N_REGULATORS] = {
},
{
.name = "DCDC2",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc2_voltages),
.voltages = dcdc2_voltages,
- .fixed_ilimsel = 1200000,
+ .n_ilimsels = ARRAY_SIZE(fixed_1200000_ilimsel),
+ .ilimsels = fixed_1200000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC2_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -389,10 +397,10 @@ static const struct supply_info supply_info[N_REGULATORS] = {
},
{
.name = "DCDC3",
- .flags = FIXED_ILIMSEL,
.n_voltages = ARRAY_SIZE(dcdc3_voltages),
.voltages = dcdc3_voltages,
- .fixed_ilimsel = 1200000,
+ .n_ilimsels = ARRAY_SIZE(fixed_1200000_ilimsel),
+ .ilimsels = fixed_1200000_ilimsel,
.enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK,
DCDCDCDC3_EN_SHIFT),
.voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK,
@@ -439,8 +447,8 @@ static const struct supply_info supply_info[N_REGULATORS] = {
.name = "LCD",
.n_voltages = ARRAY_SIZE(fixed_5000000_voltage),
.voltages = fixed_5000000_voltage,
- .flags = FIXED_ILIMSEL,
- .fixed_ilimsel = 400000,
+ .n_ilimsels = ARRAY_SIZE(fixed_400000_ilimsel),
+ .ilimsels = fixed_400000_ilimsel,
.enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK,
BLOCK_LCD_SHIFT),
},
@@ -491,7 +499,7 @@ static int set_current_limit(struct regulator_dev *rdev, int min_uA,
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];

- if (info->flags & FIXED_ILIMSEL)
+ if (info->n_ilimsels == 1)
return -EINVAL;

for (i = 0; i < info->n_ilimsels; i++)
@@ -514,8 +522,8 @@ static int get_current_limit(struct regulator_dev *rdev)
hw = rdev_get_drvdata(rdev);
info = &supply_info[rdev_get_id(rdev)];

- if (info->flags & FIXED_ILIMSEL)
- return info->fixed_ilimsel;
+ if (info->n_ilimsels == 1)
+ return info->ilimsels[0];

ret = read_field(hw, &info->ilimsel);
if (ret < 0)
--
1.7.9.5