Subject: [PATCH] usb: phy: Fix Kconfig dependency for Phy drivers

USB phy layer driver are only built if usb host is selected, but they
are used too by USB_GADGET drivers

Signed-off-by: Alexandre Pereira da Silva <[email protected]>
---
drivers/usb/Makefile | 2 +-
drivers/usb/phy/Kconfig | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index c691eea..f5ed3d7 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/

obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB) += phy/
+obj-$(CONFIG_USB_COMMON) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/

obj-$(CONFIG_USB_ATM) += atm/
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 3cfabcb..e7cf84f 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -2,11 +2,11 @@
# Physical Layer USB driver configuration
#
comment "USB Physical Layer drivers"
- depends on USB
+ depends on USB || USB_GADGET

config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
- depends on USB
+ depends on USB || USB_GADGET
depends on I2C
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
--
1.7.10


2012-06-26 15:49:14

by Roland Stigge

[permalink] [raw]
Subject: Re: [PATCH] usb: phy: Fix Kconfig dependency for Phy drivers

On 06/26/2012 04:56 PM, Alexandre Pereira da Silva wrote:
> USB phy layer driver are only built if usb host is selected, but they
> are used too by USB_GADGET drivers
>
> Signed-off-by: Alexandre Pereira da Silva <[email protected]>

Acked-by: Roland Stigge <[email protected]>

> ---
> drivers/usb/Makefile | 2 +-
> drivers/usb/phy/Kconfig | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> index c691eea..f5ed3d7 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -46,7 +46,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
> obj-$(CONFIG_USB_SERIAL) += serial/
>
> obj-$(CONFIG_USB) += misc/
> -obj-$(CONFIG_USB) += phy/
> +obj-$(CONFIG_USB_COMMON) += phy/
> obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
>
> obj-$(CONFIG_USB_ATM) += atm/
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> index 3cfabcb..e7cf84f 100644
> --- a/drivers/usb/phy/Kconfig
> +++ b/drivers/usb/phy/Kconfig
> @@ -2,11 +2,11 @@
> # Physical Layer USB driver configuration
> #
> comment "USB Physical Layer drivers"
> - depends on USB
> + depends on USB || USB_GADGET
>
> config USB_ISP1301
> tristate "NXP ISP1301 USB transceiver support"
> - depends on USB
> + depends on USB || USB_GADGET
> depends on I2C
> help
> Say Y here to add support for the NXP ISP1301 USB transceiver driver.