Tegra's APB DMA driver support the cyclic mode of data
transfer and hence setting the DMA_CYCLIC caps for dma
channels.
This is require when generic sound dmaengine pcm driver
request for dma channel with CYCLIC capability.
Signed-off-by: Laxman Dewangan <[email protected]>
---
drivers/dma/tegra20-apb-dma.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index 134ea7c..b4bd50c 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1306,6 +1306,8 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev)
dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
+ dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
+
tdma->dma_dev.dev = &pdev->dev;
tdma->dma_dev.device_alloc_chan_resources =
tegra_dma_alloc_chan_resources;
--
1.7.1.1
The sound dmaengine pcm driver uses the dma in cyclic mode and
it does not ack the transfer descriptor after transfer stops.
This may lead to hold that desc in chip's dma driver and does
not allow to reuse/free that descriptors. Hence not enabling
flag DMA_CTRL_ACK when dma runs in cyclic mode.
Signed-off-by: Laxman Dewangan <[email protected]>
---
drivers/dma/tegra20-apb-dma.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index b4bd50c..2e4c187 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1093,7 +1093,7 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
mem += len;
}
sg_req->last_sg = true;
- dma_desc->txd.flags = DMA_CTRL_ACK;
+ dma_desc->txd.flags = 0;
/*
* Make sure that mode should not be conflicting with currently
--
1.7.1.1
On 06/22/2012 05:42 AM, Laxman Dewangan wrote:
> Tegra's APB DMA driver support the cyclic mode of data
> transfer and hence setting the DMA_CYCLIC caps for dma
> channels.
>
> This is require when generic sound dmaengine pcm driver
> request for dma channel with CYCLIC capability.
>
> Signed-off-by: Laxman Dewangan <[email protected]>
Acked-by: Stephen Warren <[email protected]>
On 06/22/2012 05:42 AM, Laxman Dewangan wrote:
> The sound dmaengine pcm driver uses the dma in cyclic mode and
> it does not ack the transfer descriptor after transfer stops.
> This may lead to hold that desc in chip's dma driver and does
> not allow to reuse/free that descriptors. Hence not enabling
> flag DMA_CTRL_ACK when dma runs in cyclic mode.
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> @@ -1093,7 +1093,7 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
> - dma_desc->txd.flags = DMA_CTRL_ACK;
> + dma_desc->txd.flags = 0;
I honestly have no idea about this one. If the dmaengine maintainers
think it's semantically correct, I have no objections.
On Fri, 2012-06-22 at 17:12 +0530, Laxman Dewangan wrote:
> Tegra's APB DMA driver support the cyclic mode of data
> transfer and hence setting the DMA_CYCLIC caps for dma
> channels.
>
> This is require when generic sound dmaengine pcm driver
> request for dma channel with CYCLIC capability.
>
> Signed-off-by: Laxman Dewangan <[email protected]>
> ---
> drivers/dma/tegra20-apb-dma.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
> index 134ea7c..b4bd50c 100644
> --- a/drivers/dma/tegra20-apb-dma.c
> +++ b/drivers/dma/tegra20-apb-dma.c
> @@ -1306,6 +1306,8 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev)
>
> dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
> dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
> + dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
> +
> tdma->dma_dev.dev = &pdev->dev;
> tdma->dma_dev.device_alloc_chan_resources =
> tegra_dma_alloc_chan_resources;
What sort of testing went into this.
I can see that you are marking descriptor complete even for cyclic case,
that is wrong you should fix that as well. See the other drivers for
cyclic handling of descriptors.
--
~Vinod
On Wednesday 27 June 2012 06:59 PM, Vinod Koul wrote:
> On Fri, 2012-06-22 at 17:12 +0530, Laxman Dewangan wrote:
>> Tegra's APB DMA driver support the cyclic mode of data
>> transfer and hence setting the DMA_CYCLIC caps for dma
>> channels.
>>
>> This is require when generic sound dmaengine pcm driver
>> request for dma channel with CYCLIC capability.
>>
>> Signed-off-by: Laxman Dewangan<[email protected]>
>> ---
>> drivers/dma/tegra20-apb-dma.c | 2 ++
>> 1 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
>> index 134ea7c..b4bd50c 100644
>> --- a/drivers/dma/tegra20-apb-dma.c
>> +++ b/drivers/dma/tegra20-apb-dma.c
>> @@ -1306,6 +1306,8 @@ static int __devinit tegra_dma_probe(struct platform_device *pdev)
>>
>> dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
>> dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
>> + dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
>> +
>> tdma->dma_dev.dev =&pdev->dev;
>> tdma->dma_dev.device_alloc_chan_resources =
>> tegra_dma_alloc_chan_resources;
> What sort of testing went into this.
I used the function snd_dmaengine_pcm_open() in
sound/soc/soc-dmaengine-pcm.c.
This fails because dmaengine_pcm_request_channel() require caps of
DMA_CYCLIC
which is called by snd_dmaengine_pcm_open().
> I can see that you are marking descriptor complete even for cyclic case,
> that is wrong you should fix that as well. See the other drivers for
> cyclic handling of descriptors.
>
Not really,
I called dma_cookie_complete() only from the isr handle_once_dma_done()
which is only called if it is non-cyclic mode.
On Wed, 2012-06-27 at 19:12 +0530, Laxman Dewangan wrote:
> Not really,
> I called dma_cookie_complete() only from the isr
> handle_once_dma_done()
> which is only called if it is non-cyclic mode.
Ah got it my bad.
Applied now, Thanks
--
~Vinod