This patch adds the implementation of a new scheduling algorithm - ROW.
The policy of this algorithm is to prioritize READ requests over WRITE
as much as possible without starving the WRITE requests.
Signed-off-by: Tatyana Brokhman <[email protected]>
---
Documentation/block/row-iosched.txt | 117 ++++++
block/Kconfig.iosched | 22 ++
block/Makefile | 1 +
block/row-iosched.c | 675 +++++++++++++++++++++++++++++++++++
4 files changed, 815 insertions(+), 0 deletions(-)
create mode 100644 Documentation/block/row-iosched.txt
create mode 100644 block/row-iosched.c
diff --git a/Documentation/block/row-iosched.txt b/Documentation/block/row-iosched.txt
new file mode 100644
index 0000000..987bd88
--- /dev/null
+++ b/Documentation/block/row-iosched.txt
@@ -0,0 +1,117 @@
+Introduction
+============
+
+The ROW scheduling algorithm will be used in mobile devices as default
+block layer IO scheduling algorithm. ROW stands for "READ Over WRITE"
+which is the main requests dispatch policy of this algorithm.
+
+The ROW IO scheduler was developed with the mobile devices needs in
+mind. In mobile devices we favor user experience upon everything else,
+thus we want to give READ IO requests as much priority as possible.
+The main idea of the ROW scheduling policy is:
+If there are READ requests in pipe - dispatch them but don't starve
+the WRITE requests too much.
+
+Software description
+====================
+The requests are kept in queues according to their priority. The
+dispatching of requests is done in a Round Robin manner with a
+different slice for each queue. The dispatch quantum for a specific
+queue is defined according to the queues priority. READ queues are
+given bigger dispatch quantum than the WRITE queues, within a dispatch
+cycle.
+
+At the moment there are 6 types of queues the requests are
+distributed to:
+- High priority READ queue
+- High priority Synchronous WRITE queue
+- Regular priority READ queue
+- Regular priority Synchronous WRITE queue
+- Regular priority WRITE queue
+- Low priority READ queue
+
+If in a certain dispatch cycle one of the queues was empty and didn't
+use its quantum that queue will be marked as "un-served". If we're in a
+middle of a dispatch cycle dispatching from queue Y and a request
+arrives for queue X that was un-served in the previous cycle, if X's
+priority is higher than Y's, queue X will be preempted in the favor of
+queue Y. This won't mean that cycle is restarted. The "dispatched"
+counter of queue X will remain unchanged. Once queue Y uses up it's quantum
+(or there will be no more requests left on it) we'll switch back to queue X
+and allow it to finish it's quantum.
+
+For READ requests queues we allow idling in within a dispatch quantum in
+order to give the application a chance to insert more requests. Idling
+means adding some extra time for serving a certain queue even if the
+queue is empty. The idling is enabled if we identify the application is
+inserting requests in a high frequency.
+
+For idling on READ queues we use timer mechanism. When the timer expires,
+if there are requests in the scheduler we will signal the underlying driver
+(for example the MMC driver) to fetch another request for dispatch.
+
+The ROW algorithm takes the scheduling policy one step further, making
+it a bit more "user-needs oriented", by allowing the application to
+hint on the urgency of its requests. For example: even among the READ
+requests several requests may be more urgent for completion then others.
+The former will go to the High priority READ queue, that is given the
+bigger dispatch quantum than any other queue.
+
+ROW scheduler will support special services for block devices that
+supports High Priority Requests. That is, the scheduler may inform the
+device upon urgent requests using new callback make_urgent_request.
+In addition it will support rescheduling of requests that were
+interrupted. For example, if the device issues a long write request and
+a sudden high priority read interrupt pops in, the scheduler will
+inform the device about the urgent request, so the device can stop the
+current write request and serve the high priority read request. In such
+a case the device may also send back to the scheduler the reminder of
+the interrupted write request, such that the scheduler may continue
+sending high priority requests without the need to interrupt the
+ongoing write again and again. The write remainder will be sent later on
+according to the scheduler policy.
+
+Design
+======
+Existing algorithms (cfq, deadline) sort the io requests according LBA.
+When deciding on the next request to dispatch they choose the closest
+request to the current disk head position (from handling last
+dispatched request). This is done in order to reduce the disk head
+movement to a minimum.
+We feel that this functionality isn't really needed in mobile devices.
+Usually applications that write/read large chunks of data insert the
+requests in already sorted LBA order. Thus dealing with sort trees adds
+unnecessary complexity.
+
+We're planing to try this enhancement in the future to check if the
+performance is influenced by it.
+
+SMP/multi-core
+==============
+At the moment the code is acceded from 2 contexts:
+- Application context (from block/elevator layer): adding the requests.
+- Underlying driver context (for example the mmc driver thread): dispatching
+ the requests and notifying on completion.
+
+One lock is used to synchronize between the two. This lock is provided
+by the underlying driver along with the dispatch queue.
+
+Config options
+==============
+1. hp_read_quantum: dispatch quantum for the high priority READ queue
+2. rp_read_quantum: dispatch quantum for the regular priority READ queue
+3. hp_swrite_quantum: dispatch quantum for the high priority Synchronous
+ WRITE queue
+4. rp_swrite_quantum: dispatch quantum for the regular priority
+ Synchronous WRITE queue
+5. rp_write_quantum: dispatch quantum for the regular priority WRITE
+ queue
+6. lp_read_quantum: dispatch quantum for the low priority READ queue
+7. lp_swrite_quantum: dispatch quantum for the low priority Synchronous
+ WRITE queue
+8. read_idle: how long to idle on read queue in Msec (in case idling
+ is enabled on that queue).
+9. read_idle_freq: frequency of inserting READ requests that will
+ trigger idling. This is the time in Msec between inserting two READ
+ requests
+
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 421bef9..401f42d 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -21,6 +21,17 @@ config IOSCHED_DEADLINE
a new point in the service tree and doing a batch of IO from there
in case of expiry.
+config IOSCHED_ROW
+ tristate "ROW I/O scheduler"
+ default y
+ ---help---
+ The ROW I/O scheduler gives priority to READ requests over the
+ WRITE requests when dispatching, without starving WRITE requests.
+ Requests are kept in priority queues. Dispatching is done in a RR
+ manner when the dispatch quantum for each queue is calculated
+ according to queue priority.
+ Most suitable for mobile devices.
+
config IOSCHED_CFQ
tristate "CFQ I/O scheduler"
default y
@@ -49,6 +60,16 @@ choice
config DEFAULT_DEADLINE
bool "Deadline" if IOSCHED_DEADLINE=y
+ config DEFAULT_ROW
+ bool "ROW" if IOSCHED_ROW=y
+ help
+ The ROW I/O scheduler gives priority to READ requests
+ over the WRITE requests when dispatching, without starving
+ WRITE requests. Requests are kept in priority queues.
+ Dispatching is done in a RR manner when the dispatch quantum
+ for each queue is defined according to queue priority.
+ Most suitable for mobile devices.
+
config DEFAULT_CFQ
bool "CFQ" if IOSCHED_CFQ=y
@@ -60,6 +81,7 @@ endchoice
config DEFAULT_IOSCHED
string
default "deadline" if DEFAULT_DEADLINE
+ default "row" if DEFAULT_ROW
default "cfq" if DEFAULT_CFQ
default "noop" if DEFAULT_NOOP
diff --git a/block/Makefile b/block/Makefile
index 39b76ba..dd80dc2 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_BLK_CGROUP) += blk-cgroup.o
obj-$(CONFIG_BLK_DEV_THROTTLING) += blk-throttle.o
obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o
obj-$(CONFIG_IOSCHED_DEADLINE) += deadline-iosched.o
+obj-$(CONFIG_IOSCHED_ROW) += row-iosched.o
obj-$(CONFIG_IOSCHED_CFQ) += cfq-iosched.o
obj-$(CONFIG_BLOCK_COMPAT) += compat_ioctl.o
diff --git a/block/row-iosched.c b/block/row-iosched.c
new file mode 100644
index 0000000..387cc93
--- /dev/null
+++ b/block/row-iosched.c
@@ -0,0 +1,675 @@
+/*
+ * ROW (Read Over Write) I/O scheduler.
+ *
+ * Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* See Documentation/block/row-iosched.txt */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/blkdev.h>
+#include <linux/elevator.h>
+#include <linux/bio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/compiler.h>
+#include <linux/blktrace_api.h>
+#include <linux/jiffies.h>
+
+/*
+ * enum row_queue_prio - Priorities of the ROW queues
+ *
+ * This enum defines the priorities (and the number of queues)
+ * the requests will be disptributed to. The higher priority -
+ * the bigger is the dispatch quantum given to that queue.
+ * ROWQ_PRIO_HIGH_READ - is the higher priority queue.
+ *
+ */
+enum row_queue_prio {
+ ROWQ_PRIO_HIGH_READ = 0,
+ ROWQ_PRIO_REG_READ,
+ ROWQ_PRIO_HIGH_SWRITE,
+ ROWQ_PRIO_REG_SWRITE,
+ ROWQ_PRIO_REG_WRITE,
+ ROWQ_PRIO_LOW_READ,
+ ROWQ_PRIO_LOW_SWRITE,
+ ROWQ_MAX_PRIO,
+};
+
+/* Flags indicating whether idling is enabled on the queue */
+static const bool queue_idling_enabled[] = {
+ true, /* ROWQ_PRIO_HIGH_READ */
+ true, /* ROWQ_PRIO_REG_READ */
+ false, /* ROWQ_PRIO_HIGH_SWRITE */
+ false, /* ROWQ_PRIO_REG_SWRITE */
+ false, /* ROWQ_PRIO_REG_WRITE */
+ false, /* ROWQ_PRIO_LOW_READ */
+ false, /* ROWQ_PRIO_LOW_SWRITE */
+};
+
+/* Default values for row queues quantums in each dispatch cycle */
+static const int queue_quantum[] = {
+ 100, /* ROWQ_PRIO_HIGH_READ */
+ 100, /* ROWQ_PRIO_REG_READ */
+ 2, /* ROWQ_PRIO_HIGH_SWRITE */
+ 1, /* ROWQ_PRIO_REG_SWRITE */
+ 1, /* ROWQ_PRIO_REG_WRITE */
+ 1, /* ROWQ_PRIO_LOW_READ */
+ 1 /* ROWQ_PRIO_LOW_SWRITE */
+};
+
+/* Default values for idling on read queues */
+#define ROW_IDLE_TIME 50 /* 5 msec */
+#define ROW_READ_FREQ 70 /* 7 msec */
+
+/**
+ * struct rowq_idling_data - parameters for idling on the queue
+ * @idle_trigger_time: time (in jiffies). If a new request was
+ * inserted before this time value, idling
+ * will be enabled.
+ * @begin_idling: flag indicating wether we should idle
+ *
+ */
+struct rowq_idling_data {
+ unsigned long idle_trigger_time;
+ bool begin_idling;
+};
+
+/**
+ * struct row_queue - requests grouping structure
+ * @rdata: parent row_data structure
+ * @fifo: fifo of requests
+ * @prio: queue priority (enum row_queue_prio)
+ * @nr_dispatched: number of requests already dispatched in
+ * the current dispatch cycle
+ * @slice: number of requests to dispatch in a cycle
+ * @idle_data: data for idling on queues
+ *
+ */
+struct row_queue {
+ struct row_data *rdata;
+ struct list_head fifo;
+ enum row_queue_prio prio;
+
+ unsigned int nr_dispatched;
+ unsigned int slice;
+
+ /* used only for READ queues */
+ struct rowq_idling_data idle_data;
+};
+
+/**
+ * struct idling_data - data for idling on empty rqueue
+ * @idle_time: idling duration (msec)
+ * @freq: min time between two requests that
+ * triger idling (msec)
+ * @idle_work: pointer to struct delayed_work
+ *
+ */
+struct idling_data {
+ unsigned long idle_time;
+ unsigned long freq;
+
+ struct delayed_work idle_work;
+};
+
+/**
+ * struct row_queue - Per block device rqueue structure
+ * @dispatch_queue: dispatch rqueue
+ * @row_queues: array of priority request queues with
+ * dispatch quantum per rqueue
+ * @curr_queue: index in the row_queues array of the
+ * currently serviced rqueue
+ * @read_idle: data for idling after READ request
+ * @nr_reqs: nr_reqs[0] holds the number of all READ requests in
+ * scheduler, nr_reqs[1] holds the number of all WRITE
+ * requests in scheduler
+ * @cycle_flags: used for marking unserved queueus
+ *
+ */
+struct row_data {
+ struct request_queue *dispatch_queue;
+
+ struct {
+ struct row_queue rqueue;
+ int disp_quantum;
+ } row_queues[ROWQ_MAX_PRIO];
+
+ enum row_queue_prio curr_queue;
+
+ struct idling_data read_idle;
+ unsigned int nr_reqs[2];
+
+ unsigned int cycle_flags;
+};
+
+#define RQ_ROWQ(rq) ((struct row_queue *) ((rq)->elv.priv[0]))
+
+#define row_log(q, fmt, args...) \
+ blk_add_trace_msg(q, "%s():" fmt , __func__, ##args)
+#define row_log_rowq(rdata, rowq_id, fmt, args...) \
+ blk_add_trace_msg(rdata->dispatch_queue, "rowq%d " fmt, \
+ rowq_id, ##args)
+
+static inline void row_mark_rowq_unserved(struct row_data *rd,
+ enum row_queue_prio qnum)
+{
+ rd->cycle_flags |= (1 << qnum);
+}
+
+static inline void row_clear_rowq_unserved(struct row_data *rd,
+ enum row_queue_prio qnum)
+{
+ rd->cycle_flags &= ~(1 << qnum);
+}
+
+static inline int row_rowq_unserved(struct row_data *rd,
+ enum row_queue_prio qnum)
+{
+ return rd->cycle_flags & (1 << qnum);
+}
+
+/******************** Static helper functions ***********************/
+/*
+ * kick_queue() - Wake up device driver queue thread
+ * @work: pointer to struct work_struct
+ *
+ * This is a idling delayed work function. It's purpose is to wake up the
+ * device driver in order for it to start fetching requests.
+ *
+ */
+static void kick_queue(struct work_struct *work)
+{
+ struct delayed_work *idle_work = to_delayed_work(work);
+ struct idling_data *read_data =
+ container_of(idle_work, struct idling_data, idle_work);
+ struct row_data *rd =
+ container_of(read_data, struct row_data, read_idle);
+
+ row_log_rowq(rd, rd->curr_queue, "Performing delayed work");
+ /* Mark idling process as done */
+ rd->row_queues[rd->curr_queue].rqueue.idle_data.begin_idling = false;
+
+ if (!(rd->nr_reqs[0] + rd->nr_reqs[1]))
+ row_log(rd->dispatch_queue, "No requests in scheduler");
+ else {
+ spin_lock_irq(rd->dispatch_queue->queue_lock);
+ __blk_run_queue(rd->dispatch_queue);
+ spin_unlock_irq(rd->dispatch_queue->queue_lock);
+ }
+}
+
+/*
+ * row_restart_disp_cycle() - Restart the dispatch cycle
+ * @rd: pointer to struct row_data
+ *
+ * This function restarts the dispatch cycle by:
+ * - Setting current queue to ROWQ_PRIO_HIGH_READ
+ * - For each queue: reset the number of requests dispatched in
+ * the cycle
+ */
+static inline void row_restart_disp_cycle(struct row_data *rd)
+{
+ int i;
+
+ for (i = 0; i < ROWQ_MAX_PRIO; i++)
+ rd->row_queues[i].rqueue.nr_dispatched = 0;
+
+ rd->curr_queue = ROWQ_PRIO_HIGH_READ;
+ row_log(rd->dispatch_queue, "Restarting cycle");
+}
+
+static inline void row_get_next_queue(struct row_data *rd)
+{
+ rd->curr_queue++;
+ if (rd->curr_queue == ROWQ_MAX_PRIO)
+ row_restart_disp_cycle(rd);
+}
+
+/******************* Elevator callback functions *********************/
+
+/*
+ * row_add_request() - Add request to the scheduler
+ * @q: requests queue
+ * @rq: request to add
+ *
+ */
+static void row_add_request(struct request_queue *q,
+ struct request *rq)
+{
+ struct row_data *rd = (struct row_data *)q->elevator->elevator_data;
+ struct row_queue *rqueue = RQ_ROWQ(rq);
+
+ list_add_tail(&rq->queuelist, &rqueue->fifo);
+ rd->nr_reqs[rq_data_dir(rq)]++;
+ rq_set_fifo_time(rq, jiffies); /* for statistics*/
+
+ if (queue_idling_enabled[rqueue->prio]) {
+ if (delayed_work_pending(&rd->read_idle.idle_work))
+ (void)cancel_delayed_work(
+ &rd->read_idle.idle_work);
+ if (time_before(jiffies, rqueue->idle_data.idle_trigger_time)) {
+ rqueue->idle_data.begin_idling = true;
+ row_log_rowq(rd, rqueue->prio, "Enable idling");
+ } else
+ rqueue->idle_data.begin_idling = false;
+
+ rqueue->idle_data.idle_trigger_time =
+ jiffies + msecs_to_jiffies(rd->read_idle.freq);
+ }
+ row_log_rowq(rd, rqueue->prio, "added request");
+}
+
+/*
+ * row_remove_request() - Remove given request from scheduler
+ * @q: requests queue
+ * @rq: request to remove
+ *
+ */
+static void row_remove_request(struct request_queue *q,
+ struct request *rq)
+{
+ struct row_data *rd = (struct row_data *)q->elevator->elevator_data;
+
+ rq_fifo_clear(rq);
+ rd->nr_reqs[rq_data_dir(rq)]--;
+}
+
+/*
+ * row_dispatch_insert() - move request to dispatch queue
+ * @rd: pointer to struct row_data
+ *
+ * This function moves the next request to dispatch from
+ * rd->curr_queue to the dispatch queue
+ *
+ */
+static void row_dispatch_insert(struct row_data *rd)
+{
+ struct request *rq;
+
+ rq = rq_entry_fifo(rd->row_queues[rd->curr_queue].rqueue.fifo.next);
+ row_remove_request(rd->dispatch_queue, rq);
+ elv_dispatch_add_tail(rd->dispatch_queue, rq);
+ rd->row_queues[rd->curr_queue].rqueue.nr_dispatched++;
+ row_clear_rowq_unserved(rd, rd->curr_queue);
+ row_log_rowq(rd, rd->curr_queue, " Dispatched request nr_disp = %d",
+ rd->row_queues[rd->curr_queue].rqueue.nr_dispatched);
+}
+
+/*
+ * row_choose_queue() - choose the next queue to dispatch from
+ * @rd: pointer to struct row_data
+ *
+ * Updates rd->curr_queue. Returns 1 if there are requests to
+ * dispatch, 0 if there are no requests in scheduler
+ *
+ */
+static int row_choose_queue(struct row_data *rd)
+{
+ int prev_curr_queue = rd->curr_queue;
+
+ if (!(rd->nr_reqs[0] + rd->nr_reqs[1])) {
+ row_log(rd->dispatch_queue, "No more requests in scheduler");
+ return 0;
+ }
+
+ row_get_next_queue(rd);
+
+ /*
+ * Loop over all queues to find the next queue that is not empty.
+ * Stop when you get back to curr_queue
+ */
+ while (list_empty(&rd->row_queues[rd->curr_queue].rqueue.fifo)
+ && rd->curr_queue != prev_curr_queue) {
+ /* Mark rqueue as unserved */
+ row_mark_rowq_unserved(rd, rd->curr_queue);
+ row_get_next_queue(rd);
+ }
+
+ return 1;
+}
+
+/*
+ * row_dispatch_requests() - selects the next request to dispatch
+ * @q: requests queue
+ * @force: ignored
+ *
+ * Return 0 if no requests were moved to the dispatch queue.
+ * 1 otherwise
+ *
+ */
+static int row_dispatch_requests(struct request_queue *q, int force)
+{
+ struct row_data *rd = (struct row_data *)q->elevator->elevator_data;
+ int ret = 0, currq, i;
+
+ currq = rd->curr_queue;
+
+ /*
+ * Find the first unserved queue (with higher priority then currq)
+ * that is not empty
+ */
+ for (i = 0; i < currq; i++) {
+ if (row_rowq_unserved(rd, i) &&
+ !list_empty(&rd->row_queues[i].rqueue.fifo)) {
+ row_log_rowq(rd, currq,
+ " Preemting for unserved rowq%d", i);
+ rd->curr_queue = i;
+ row_dispatch_insert(rd);
+ ret = 1;
+ goto done;
+ }
+ }
+
+ if (rd->row_queues[currq].rqueue.nr_dispatched >=
+ rd->row_queues[currq].disp_quantum) {
+ rd->row_queues[currq].rqueue.nr_dispatched = 0;
+ row_log_rowq(rd, currq, "Expiring rqueue");
+ ret = row_choose_queue(rd);
+ if (ret)
+ row_dispatch_insert(rd);
+ goto done;
+ }
+
+ /* Dispatch from curr_queue */
+ if (list_empty(&rd->row_queues[currq].rqueue.fifo)) {
+ /* check idling */
+ if (delayed_work_pending(&rd->read_idle.idle_work)) {
+ row_log_rowq(rd, currq,
+ "Delayed work pending. Exiting");
+ goto done;
+ }
+
+ if (queue_idling_enabled[currq] &&
+ rd->row_queues[currq].rqueue.idle_data.begin_idling) {
+ if (!kblockd_schedule_delayed_work(rd->dispatch_queue,
+ &rd->read_idle.idle_work, jiffies +
+ msecs_to_jiffies(rd->read_idle.idle_time))) {
+ row_log_rowq(rd, currq,
+ "Work already on queue!");
+ pr_err("ROW_BUG: Work already on queue!");
+ } else
+ row_log_rowq(rd, currq,
+ "Scheduled delayed work. exiting");
+ goto done;
+ } else {
+ row_log_rowq(rd, currq,
+ "Currq empty. Choose next queue");
+ ret = row_choose_queue(rd);
+ if (!ret)
+ goto done;
+ }
+ }
+
+ ret = 1;
+ row_dispatch_insert(rd);
+
+done:
+ return ret;
+}
+
+/*
+ * row_init_queue() - Init scheduler data structures
+ * @q: requests queue
+ *
+ * Return pointer to struct row_data to be saved in elevator for
+ * this dispatch queue
+ *
+ */
+static void *row_init_queue(struct request_queue *q)
+{
+
+ struct row_data *rdata;
+ int i;
+
+ rdata = kmalloc_node(sizeof(*rdata),
+ GFP_KERNEL | __GFP_ZERO, q->node);
+ if (!rdata)
+ return NULL;
+
+ for (i = 0; i < ROWQ_MAX_PRIO; i++) {
+ INIT_LIST_HEAD(&rdata->row_queues[i].rqueue.fifo);
+ rdata->row_queues[i].disp_quantum = queue_quantum[i];
+ rdata->row_queues[i].rqueue.rdata = rdata;
+ rdata->row_queues[i].rqueue.prio = i;
+ rdata->row_queues[i].rqueue.idle_data.begin_idling = false;
+ }
+
+ /*
+ * Currently idling is enabled only for READ queues. If we want to
+ * enable it for write queues also, note that idling frequency will
+ * be the same in both cases
+ */
+ rdata->read_idle.idle_time = ROW_IDLE_TIME;
+ rdata->read_idle.freq = ROW_READ_FREQ;
+ INIT_DELAYED_WORK(&rdata->read_idle.idle_work, kick_queue);
+
+ rdata->curr_queue = ROWQ_PRIO_HIGH_READ;
+ rdata->dispatch_queue = q;
+
+ rdata->nr_reqs[READ] = rdata->nr_reqs[WRITE] = 0;
+
+ return rdata;
+}
+
+/*
+ * row_exit_queue() - called on unloading the RAW scheduler
+ * @e: poiner to struct elevator_queue
+ *
+ */
+static void row_exit_queue(struct elevator_queue *e)
+{
+ struct row_data *rd = (struct row_data *)e->elevator_data;
+ int i;
+
+ for (i = 0; i < ROWQ_MAX_PRIO; i++)
+ BUG_ON(!list_empty(&rd->row_queues[i].rqueue.fifo));
+ (void)cancel_delayed_work_sync(&rd->read_idle.idle_work);
+ kfree(rd);
+}
+
+/*
+ * row_merged_requests() - Called when 2 requests are merged
+ * @q: requests queue
+ * @rq: request the two requests were merged into
+ * @next: request that was merged
+ */
+static void row_merged_requests(struct request_queue *q, struct request *rq,
+ struct request *next)
+{
+ struct row_queue *rqueue = RQ_ROWQ(next);
+
+ list_del_init(&next->queuelist);
+
+ rqueue->rdata->nr_reqs[rq_data_dir(rq)]--;
+}
+
+/*
+ * get_queue_type() - Get queue type for a given request
+ *
+ * This is a helping function which purpose is to determine what
+ * ROW queue the given request should be added to (and
+ * dispatched from leter on)
+ *
+ * TODO: Right now only 3 queues are used REG_READ, REG_WRITE
+ * and REG_SWRITE
+ */
+static enum row_queue_prio get_queue_type(struct request *rq)
+{
+ const int data_dir = rq_data_dir(rq);
+ const bool is_sync = rq_is_sync(rq);
+
+ if (data_dir == READ)
+ return ROWQ_PRIO_REG_READ;
+ else if (is_sync)
+ return ROWQ_PRIO_REG_SWRITE;
+ else
+ return ROWQ_PRIO_REG_WRITE;
+}
+
+/*
+ * row_set_request() - Set ROW data structures associated with this request.
+ * @q: requests queue
+ * @rq: pointer to the request
+ * @gfp_mask: ignored
+ *
+ */
+static int
+row_set_request(struct request_queue *q, struct request *rq, gfp_t gfp_mask)
+{
+ struct row_data *rd = (struct row_data *)q->elevator->elevator_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ rq->elv.priv[0] =
+ (void *)(&rd->row_queues[get_queue_type(rq)]);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ return 0;
+}
+
+/********** Helping sysfs functions/defenitions for ROW attributes ******/
+static ssize_t row_var_show(int var, char *page)
+{
+ return snprintf(page, 100, "%d\n", var);
+}
+
+static ssize_t row_var_store(int *var, const char *page, size_t count)
+{
+ int err;
+ err = kstrtoul(page, 10, (unsigned long *)var);
+
+ return count;
+}
+
+#define SHOW_FUNCTION(__FUNC, __VAR, __CONV) \
+static ssize_t __FUNC(struct elevator_queue *e, char *page) \
+{ \
+ struct row_data *rowd = e->elevator_data; \
+ int __data = __VAR; \
+ if (__CONV) \
+ __data = jiffies_to_msecs(__data); \
+ return row_var_show(__data, (page)); \
+}
+SHOW_FUNCTION(row_hp_read_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_HIGH_READ].disp_quantum, 0);
+SHOW_FUNCTION(row_rp_read_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_REG_READ].disp_quantum, 0);
+SHOW_FUNCTION(row_hp_swrite_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_HIGH_SWRITE].disp_quantum, 0);
+SHOW_FUNCTION(row_rp_swrite_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_REG_SWRITE].disp_quantum, 0);
+SHOW_FUNCTION(row_rp_write_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_REG_WRITE].disp_quantum, 0);
+SHOW_FUNCTION(row_lp_read_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_LOW_READ].disp_quantum, 0);
+SHOW_FUNCTION(row_lp_swrite_quantum_show,
+ rowd->row_queues[ROWQ_PRIO_LOW_SWRITE].disp_quantum, 0);
+SHOW_FUNCTION(row_read_idle_show, rowd->read_idle.idle_time, 1);
+SHOW_FUNCTION(row_read_idle_freq_show, rowd->read_idle.freq, 1);
+#undef SHOW_FUNCTION
+
+#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV) \
+static ssize_t __FUNC(struct elevator_queue *e, \
+ const char *page, size_t count) \
+{ \
+ struct row_data *rowd = e->elevator_data; \
+ int __data; \
+ int ret = row_var_store(&__data, (page), count); \
+ if (__CONV) \
+ __data = (int)msecs_to_jiffies(__data); \
+ if (__data < (MIN)) \
+ __data = (MIN); \
+ else if (__data > (MAX)) \
+ __data = (MAX); \
+ *(__PTR) = __data; \
+ return ret; \
+}
+STORE_FUNCTION(row_hp_read_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_HIGH_READ].disp_quantum, 0,
+ INT_MAX, 0);
+STORE_FUNCTION(row_rp_read_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_REG_READ].disp_quantum, 0,
+ INT_MAX, 0);
+STORE_FUNCTION(row_hp_swrite_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_HIGH_SWRITE].disp_quantum, 0,
+ INT_MAX, 0);
+STORE_FUNCTION(row_rp_swrite_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_REG_SWRITE].disp_quantum, 0,
+ INT_MAX, 0);
+STORE_FUNCTION(row_rp_write_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_REG_WRITE].disp_quantum, 0,
+ INT_MAX, 0);
+STORE_FUNCTION(row_lp_read_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_LOW_READ].disp_quantum, 0,
+ INT_MAX, 0);
+STORE_FUNCTION(row_lp_swrite_quantum_store,
+ &rowd->row_queues[ROWQ_PRIO_LOW_SWRITE].disp_quantum, 0,
+ INT_MAX, 1);
+STORE_FUNCTION(row_read_idle_store, &rowd->read_idle.idle_time, 1, INT_MAX, 1);
+STORE_FUNCTION(row_read_idle_freq_store, &rowd->read_idle.freq,
+ 1, INT_MAX, 1);
+
+#undef STORE_FUNCTION
+
+#define ROW_ATTR(name) \
+ __ATTR(name, S_IRUGO|S_IWUSR, row_##name##_show, \
+ row_##name##_store)
+
+static struct elv_fs_entry row_attrs[] = {
+ ROW_ATTR(hp_read_quantum),
+ ROW_ATTR(rp_read_quantum),
+ ROW_ATTR(hp_swrite_quantum),
+ ROW_ATTR(rp_swrite_quantum),
+ ROW_ATTR(rp_write_quantum),
+ ROW_ATTR(lp_read_quantum),
+ ROW_ATTR(lp_swrite_quantum),
+ ROW_ATTR(read_idle),
+ ROW_ATTR(read_idle_freq),
+ __ATTR_NULL
+};
+
+static struct elevator_type iosched_row = {
+ .ops = {
+ .elevator_merge_req_fn = row_merged_requests,
+ .elevator_dispatch_fn = row_dispatch_requests,
+ .elevator_add_req_fn = row_add_request,
+ .elevator_former_req_fn = elv_rb_former_request,
+ .elevator_latter_req_fn = elv_rb_latter_request,
+ .elevator_set_req_fn = row_set_request,
+ .elevator_init_fn = row_init_queue,
+ .elevator_exit_fn = row_exit_queue,
+ },
+
+ .elevator_attrs = row_attrs,
+ .elevator_name = "row",
+ .elevator_owner = THIS_MODULE,
+};
+
+static int __init row_init(void)
+{
+ elv_register(&iosched_row);
+ return 0;
+}
+
+static void __exit row_exit(void)
+{
+ elv_unregister(&iosched_row);
+}
+
+module_init(row_init);
+module_exit(row_exit);
+
+MODULE_LICENSE("GPLv2");
+MODULE_DESCRIPTION("Read Over Write IO scheduler");
--
1.7.6
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
Tatyana Brokhman <[email protected]> writes:
> This patch adds the implementation of a new scheduling algorithm - ROW.
> The policy of this algorithm is to prioritize READ requests over WRITE
> as much as possible without starving the WRITE requests.
Perhaps you could start off by describing the workload, and describing
why the existing I/O schedulers do not perform well. Then, you could go
on to say why you feel that the existing I/O schedulers could not be
modified to perform better under your workload, and wrap the whole thing
up with some convincing performance numbers (including your testing
procedures so others could verify your work independently).
Without the above, I think you'll have a difficult time getting yet
another I/O scheduler merged into the kernel.
Cheers,
Jeff
Hi Jeff
First of all - thank you for your input! I think I did address at least some
of the issues you mentioned. But allow me to elaborate
> Perhaps you could start off by describing the workload, and describing why
> the existing I/O schedulers do not perform well.
In mobile devices we won't have AS much parallel threads as on desktops.
Usually it's a single thread or at most 2 simultaneous working threads for
read & write.
The existing I/O schedulers add unnecessary complexity (CFQ) or don't give
read requests as much priority over write as we would like them to get.
> Then, you could go on to
> say why you feel that the existing I/O schedulers could not be modified to
> perform better under your workload,
We ran tests with existing I/O schedulers and tried tuning them to serve our
purposes better but it didn't give us the results we were able to achieve
with ROW.
>and wrap the whole thing up with
> some convincing performance numbers (including your testing procedures
> so others could verify your work independently).
Aren't the test results I published convincing? It shows that ROW has the
best READ throughput and the lowest READ latency. Actually, when playing
with ROW tunable the READ throughput can go up to 34 mb/sec and READ
latency down to 70 msec (with WRITE throughput at ~15 mb/sec). The downside
is that in such configuration the write latency is ~13 sec which is a bit
too much.
I was testing on our Android based device. I don't know what numbers will
ROW produce if you run it on a PC because as I mentioned, ROW was developed
to run on mobile devices.
As I mentioned, the test I performed was parallel READ and WRITE using lmdd.
I'm not sure I understand what info is missing in order for others to
reproduce it...
Thanks,
Tanya Brokhman
---
Sent by an consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.