From: Linus Walleij <[email protected]>
This encodes the voltage shifts (the number of bits to shift
the register to get to the selector) into the regulator info.
We have several new variants of the AB8500 so this varies a
lot.
Cc: Axel Lin <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
---
drivers/regulator/ab8500.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 8807166..812611f 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -37,6 +37,7 @@
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
+ * @voltage_shift: shift to control regulator voltage
* @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
@@ -50,6 +51,7 @@ struct ab8500_regulator_info {
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
+ u8 voltage_shift;
unsigned int delay;
};
@@ -195,17 +197,14 @@ static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
}
dev_vdbg(rdev_get_dev(rdev),
- "%s-get_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
- " 0x%x\n",
- info->desc.name, info->voltage_bank, info->voltage_reg,
- info->voltage_mask, regval);
+ "%s-get_voltage (bank, reg, mask, shift, value): "
+ "0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
+ info->desc.name, info->voltage_bank,
+ info->voltage_reg, info->voltage_mask,
+ info->voltage_shift, regval);
- /* vintcore has a different layout */
val = regval & info->voltage_mask;
- if (info->desc.id == AB8500_LDO_INTCORE)
- return val >> 0x3;
- else
- return val;
+ return val >> info->voltage_shift;
}
static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
@@ -221,7 +220,7 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
}
/* set the registers for the request */
- regval = (u8)selector;
+ regval = (u8)selector << info->voltage_shift;
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->voltage_bank, info->voltage_reg,
info->voltage_mask, regval);
@@ -349,6 +348,7 @@ static struct ab8500_regulator_info
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
+ .voltage_shift = 3,
},
/*
--
1.7.11.3
On Mon, Aug 20, 2012 at 06:41:35PM +0200, Linus Walleij wrote:
> From: Linus Walleij <[email protected]>
>
> This encodes the voltage shifts (the number of bits to shift
> the register to get to the selector) into the regulator info.
> We have several new variants of the AB8500 so this varies a
> lot.
Applied, thanks.