This is the start of the stable review cycle for the 3.2.31 release.
There are 108 patches in this series, which will be posted as responses
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed Oct 10 00:00:00 UTC 2012.
Anything received after that time might be too late.
A combined patch relative to 3.2.30 will be posted as an additional
response to this, and the diffstat can be found below.
I have only scanned for 'cc: stable' in commits up to 3.6, so don't be
surprised that fixes that went upstream in the last week don't appear
here. I'll get to them in the next round.
Ben.
-------------
Makefile | 4 +-
arch/arm/boot/compressed/head.S | 1 +
arch/arm/mach-imx/mach-armadillo5x0.c | 3 +-
arch/x86/kernel/alternative.c | 2 +-
arch/x86/xen/enlighten.c | 4 +
arch/x86/xen/setup.c | 4 +
drivers/ata/libata-core.c | 1 +
drivers/block/aoe/aoecmd.c | 1 +
drivers/block/cciss_scsi.c | 1 +
drivers/block/nbd.c | 9 ++
drivers/bluetooth/ath3k.c | 7 ++
drivers/bluetooth/btusb.c | 14 ++-
drivers/cpufreq/powernow-k8.c | 63 +++++-----
drivers/dma/at_hdmac.c | 13 +-
drivers/dma/pl330.c | 5 +
drivers/edac/sb_edac.c | 7 +-
drivers/gpio/gpio-lpc32xx.c | 5 +
drivers/gpu/drm/i915/i915_gem.c | 3 +-
drivers/gpu/drm/i915/intel_hdmi.c | 2 +-
drivers/gpu/drm/radeon/atombios_crtc.c | 126 ++++----------------
drivers/hid/hid-core.c | 16 ++-
drivers/hid/hid-logitech-dj.c | 83 ++++++++++---
drivers/hid/hid-logitech-dj.h | 1 +
drivers/hid/hidraw.c | 107 +++++++++--------
drivers/hwmon/ad7314.c | 8 ++
drivers/hwmon/ads7871.c | 9 ++
drivers/hwmon/fam15h_power.c | 15 ++-
drivers/input/serio/i8042-x86ia64io.h | 6 +
drivers/iommu/intr_remapping.c | 18 ++-
drivers/md/dm-table.c | 26 +++-
drivers/md/dm.c | 56 ++++++---
drivers/md/raid10.c | 8 +-
drivers/mmc/host/sdhci.c | 5 +-
drivers/net/can/janz-ican3.c | 4 +-
drivers/net/can/ti_hecc.c | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 12 +-
drivers/net/ethernet/broadcom/tg3.c | 14 ++-
.../net/ethernet/qlogic/netxen/netxen_nic_main.c | 4 +
drivers/net/ethernet/ti/davinci_cpdma.c | 1 +
drivers/net/ppp/pppoe.c | 2 +-
drivers/net/usb/asix.c | 4 +
drivers/net/usb/sierra_net.c | 2 +-
drivers/net/wan/ixp4xx_hss.c | 1 +
.../net/wireless/brcm80211/brcmfmac/dhd_common.c | 26 ++--
.../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 6 +-
drivers/net/wireless/rtlwifi/rtl8192ce/def.h | 1 +
drivers/net/wireless/rtlwifi/rtl8192ce/hw.c | 12 +-
drivers/net/wireless/rtlwifi/rtl8192ce/sw.c | 8 +-
drivers/pci/hotplug/acpiphp_glue.c | 13 +-
drivers/platform/x86/asus-laptop.c | 8 +-
drivers/rtc/rtc-twl.c | 5 +
drivers/scsi/bnx2i/bnx2i_hwi.c | 3 +
drivers/scsi/hpsa.c | 3 +-
drivers/scsi/mpt2sas/mpt2sas_base.c | 7 ++
drivers/target/target_core_transport.c | 9 +-
drivers/tty/serial/pch_uart.c | 19 ++-
drivers/usb/core/devices.c | 2 +-
drivers/usb/core/hcd.c | 6 +-
drivers/usb/gadget/dummy_hcd.c | 8 +-
drivers/watchdog/hpwdt.c | 3 +
fs/cifs/cifs_unicode.c | 2 +-
fs/dcache.c | 10 +-
fs/proc/proc_sysctl.c | 5 +-
include/linux/dcache.h | 2 +
include/linux/hid.h | 2 +-
include/linux/hidraw.h | 4 +-
include/linux/memory.h | 2 +-
include/linux/xfrm.h | 2 +
include/net/bluetooth/smp.h | 2 +-
include/net/xfrm.h | 3 +
include/trace/events/kmem.h | 4 +-
kernel/async.c | 13 +-
kernel/cpuset.c | 3 +
kernel/exit.c | 16 +++
kernel/sched.c | 40 ++++++-
kernel/workqueue.c | 25 ++--
mm/memory_hotplug.c | 16 ++-
mm/page_alloc.c | 2 +-
net/8021q/vlan_core.c | 3 +-
net/bluetooth/hci_conn.c | 4 +
net/bluetooth/l2cap_core.c | 11 +-
net/bluetooth/l2cap_sock.c | 2 +-
net/bluetooth/smp.c | 4 +-
net/core/dev.c | 15 ++-
net/core/net_namespace.c | 4 +-
net/core/sock.c | 3 +-
net/ipv4/raw.c | 14 ++-
net/ipv4/tcp.c | 10 +-
net/ipv6/mip6.c | 20 ++--
net/ipv6/raw.c | 21 ++--
net/ipv6/route.c | 11 +-
net/l2tp/l2tp_eth.c | 2 +-
net/netrom/af_netrom.c | 7 +-
net/rds/recv.c | 3 +
net/sched/sch_cbq.c | 5 +-
net/sched/sch_qfq.c | 5 +-
net/sctp/output.c | 21 +++-
net/wireless/reg.c | 12 +-
net/xfrm/xfrm_input.c | 2 +-
net/xfrm/xfrm_policy.c | 2 +-
net/xfrm/xfrm_replay.c | 15 +++
net/xfrm/xfrm_user.c | 57 ++++++---
sound/soc/samsung/dma.c | 8 +-
103 files changed, 796 insertions(+), 436 deletions(-)
--
Ben Hutchings
Who are all these weirdos? - David Bowie, about L-Space IRC channel #afp
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Francesco Ruggeri <[email protected]>
commit 6bf6104573482570f7103d3e5ddf9574db43a363 upstream.
The unregister_sysctl_table() function hangs if all references to its
ctl_table_header structure are not dropped.
This can happen sometimes because of a leak in proc_sys_lookup():
proc_sys_lookup() gets a reference to the table via lookup_entry(), but
it does not release it when a subsequent call to sysctl_follow_link()
fails.
This patch fixes this leak by making sure the reference is always
dropped on return.
See also commit 076c3eed2c31 ("sysctl: Rewrite proc_sys_lookup
introducing find_entry and lookup_entry") which reorganized this code in
3.4.
Tested in Linux 3.4.4.
Signed-off-by: Francesco Ruggeri <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
fs/proc/proc_sysctl.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index dfafeb2..eb7cc91 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -462,9 +462,6 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
err = ERR_PTR(-ENOMEM);
inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
- if (h)
- sysctl_head_finish(h);
-
if (!inode)
goto out;
@@ -473,6 +470,8 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
d_add(dentry, inode);
out:
+ if (h)
+ sysctl_head_finish(h);
sysctl_head_finish(head);
return err;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Kubeček <[email protected]>
[ Upstream commit 15c041759bfcd9ab0a4e43f1c16e2644977d0467 ]
If recv() syscall is called for a TCP socket so that
- IOAT DMA is used
- MSG_WAITALL flag is used
- requested length is bigger than sk_rcvbuf
- enough data has already arrived to bring rcv_wnd to zero
then when tcp_recvmsg() gets to calling sk_wait_data(), receive
window can be still zero while sk_async_wait_queue exhausts
enough space to keep it zero. As this queue isn't cleaned until
the tcp_service_net_dma() call, sk_wait_data() cannot receive
any data and blocks forever.
If zero receive window and non-empty sk_async_wait_queue is
detected before calling sk_wait_data(), process the queue first.
Signed-off-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/ipv4/tcp.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 043d49b..7397ad8 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1589,8 +1589,14 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
}
#ifdef CONFIG_NET_DMA
- if (tp->ucopy.dma_chan)
- dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+ if (tp->ucopy.dma_chan) {
+ if (tp->rcv_wnd == 0 &&
+ !skb_queue_empty(&sk->sk_async_wait_queue)) {
+ tcp_service_net_dma(sk, true);
+ tcp_cleanup_rbuf(sk, copied);
+ } else
+ dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+ }
#endif
if (copied >= target) {
/* Do not sleep, just process backlog. */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Cox <[email protected]>
[ Upstream commit 6cf5c951175abcec4da470c50565cc0afe6cd11d ]
Check for an error from this and if so bail properly.
Signed-off-by: Alan Cox <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/netrom/af_netrom.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 732152f..f156382 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -1170,7 +1170,12 @@ static int nr_recvmsg(struct kiocb *iocb, struct socket *sock,
msg->msg_flags |= MSG_TRUNC;
}
- skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ er = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ if (er < 0) {
+ skb_free_datagram(sk, skb);
+ release_sock(sk);
+ return er;
+ }
if (sax != NULL) {
sax->sax25_family = AF_NETROM;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Antonio Quartulli <[email protected]>
[ Upstream commit 5316cf9a5197eb80b2800e1acadde287924ca975 ]
skb_reset_mac_len() relies on the value of the skb->network_header pointer,
therefore we must wait for such pointer to be recalculated before computing
the new mac_len value.
Signed-off-by: Antonio Quartulli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/8021q/vlan_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index f5ffc02..9ddbd4e 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -106,7 +106,6 @@ static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
return NULL;
memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
skb->mac_header += VLAN_HLEN;
- skb_reset_mac_len(skb);
return skb;
}
@@ -173,6 +172,8 @@ struct sk_buff *vlan_untag(struct sk_buff *skb)
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
+ skb_reset_mac_len(skb);
+
return skb;
err_free:
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit bdfc87f7d1e253e0a61e2fc6a75ea9d76f7fc03a ]
Its possible to setup a bad cbq configuration leading to
an infinite loop in cbq_classify()
DEV_OUT=eth0
ICMP="match ip protocol 1 0xff"
U32="protocol ip u32"
DST="match ip dst"
tc qdisc add dev $DEV_OUT root handle 1: cbq avpkt 1000 \
bandwidth 100mbit
tc class add dev $DEV_OUT parent 1: classid 1:1 cbq \
rate 512kbit allot 1500 prio 5 bounded isolated
tc filter add dev $DEV_OUT parent 1: prio 3 $U32 \
$ICMP $DST 192.168.3.234 flowid 1:
Reported-by: Denys Fedoryschenko <[email protected]>
Tested-by: Denys Fedoryschenko <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/sched/sch_cbq.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 24d94c0..599f67a 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -250,10 +250,11 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL)
cl = defmap[TC_PRIO_BESTEFFORT];
- if (cl == NULL || cl->level >= head->level)
+ if (cl == NULL)
goto fallback;
}
-
+ if (cl->level >= head->level)
+ goto fallback;
#ifdef CONFIG_NET_CLS_ACT
switch (result) {
case TC_ACT_QUEUED:
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit f778a636713a435d3a922c60b1622a91136560c1 ]
The memory reserved to dump the xfrm state includes the padding bytes of
struct xfrm_usersa_info added by the compiler for alignment (7 for
amd64, 3 for i386). Add an explicit memset(0) before filling the buffer
to avoid the info leak.
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 7f53c82..f252cae 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -689,6 +689,7 @@ out:
static void copy_to_user_state(struct xfrm_state *x, struct xfrm_usersa_info *p)
{
+ memset(p, 0, sizeof(*p));
memcpy(&p->id, &x->id, sizeof(p->id));
memcpy(&p->sel, &x->sel, sizeof(p->sel));
memcpy(&p->lft, &x->lft, sizeof(p->lft));
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit 8110e16d42d587997bcaee0c864179e6d93603fe upstream.
IBM reported a deadlock in select_parent(). This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.
There are two cases when the traversal needs to be restarted:
1) concurrent d_move(); this can only happen when not already locked,
since taking rename_lock protects against concurrent d_move().
2) racing with final d_put() on child just at the moment of ascending
to parent; rename_lock doesn't protect against this rare race, so it
can happen when already locked.
Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held. This patch fixes all three callers of
try_to_ascend().
IBM reported that the deadlock is gone with this patch.
[ I rewrote the patch to be smaller and just do the "goto again" if the
lock was already held, but credit goes to Miklos for the real work.
- Linus ]
Signed-off-by: Miklos Szeredi <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
fs/dcache.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/fs/dcache.c b/fs/dcache.c
index 0364af2..693f95b 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1134,6 +1134,8 @@ positive:
return 1;
rename_retry:
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
@@ -1236,6 +1238,8 @@ out:
rename_retry:
if (found)
return found;
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
@@ -3035,6 +3039,8 @@ resume:
return;
rename_retry:
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corentin Chary <[email protected]>
commit 8871e99f89b7d7b1ea99de550eea2a56273f42ab upstream.
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=24222
Signed-off-by: Corentin Chary <[email protected]>
Signed-off-by: Matthew Garrett <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/platform/x86/asus-laptop.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index e38f91b..110c777 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -863,9 +863,9 @@ static ssize_t show_infos(struct device *dev,
* The significance of others is yet to be found.
* If we don't find the method, we assume the device are present.
*/
- rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp);
+ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "HRWS value : %#x\n",
+ len += sprintf(page + len, "HWRS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
@@ -1751,9 +1751,9 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
* The significance of others is yet to be found.
*/
status =
- acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result);
+ acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
if (!ACPI_FAILURE(status))
- pr_notice(" HRWS returned %x", (int)hwrs_result);
+ pr_notice(" HWRS returned %x", (int)hwrs_result);
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit ba1cbad93dd47223b1f3b8edd50dd9ef2abcb2ed upstream.
The access beyond the end of device BUG_ON that was introduced to
dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement
REQ_FLUSH/FUA support for request-based dm") was an overly
drastic (but simple) response to this situation.
I have received a report that this BUG_ON was hit and now think
it would be better to use dm_kill_unmapped_request() to fail the clone
and original request with -EIO.
map_request() will assign the valid target returned by
dm_table_find_target to tio->ti. But when the target
isn't valid tio->ti is never assigned (because map_request isn't
called); so add a check for tio->ti != NULL to dm_done().
Reported-by: Mike Christie <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Jun'ichi Nomura <[email protected]>
Signed-off-by: Alasdair G Kergon <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/md/dm.c | 56 +++++++++++++++++++++++++++++++++++++------------------
1 file changed, 38 insertions(+), 18 deletions(-)
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 4e09b6f..6748e0c 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -865,10 +865,14 @@ static void dm_done(struct request *clone, int error, bool mapped)
{
int r = error;
struct dm_rq_target_io *tio = clone->end_io_data;
- dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io;
+ dm_request_endio_fn rq_end_io = NULL;
- if (mapped && rq_end_io)
- r = rq_end_io(tio->ti, clone, error, &tio->info);
+ if (tio->ti) {
+ rq_end_io = tio->ti->type->rq_end_io;
+
+ if (mapped && rq_end_io)
+ r = rq_end_io(tio->ti, clone, error, &tio->info);
+ }
if (r <= 0)
/* The target wants to complete the I/O */
@@ -1588,15 +1592,6 @@ static int map_request(struct dm_target *ti, struct request *clone,
int r, requeued = 0;
struct dm_rq_target_io *tio = clone->end_io_data;
- /*
- * Hold the md reference here for the in-flight I/O.
- * We can't rely on the reference count by device opener,
- * because the device may be closed during the request completion
- * when all bios are completed.
- * See the comment in rq_completed() too.
- */
- dm_get(md);
-
tio->ti = ti;
r = ti->type->map_rq(ti, clone, &tio->info);
switch (r) {
@@ -1628,6 +1623,26 @@ static int map_request(struct dm_target *ti, struct request *clone,
return requeued;
}
+static struct request *dm_start_request(struct mapped_device *md, struct request *orig)
+{
+ struct request *clone;
+
+ blk_start_request(orig);
+ clone = orig->special;
+ atomic_inc(&md->pending[rq_data_dir(clone)]);
+
+ /*
+ * Hold the md reference here for the in-flight I/O.
+ * We can't rely on the reference count by device opener,
+ * because the device may be closed during the request completion
+ * when all bios are completed.
+ * See the comment in rq_completed() too.
+ */
+ dm_get(md);
+
+ return clone;
+}
+
/*
* q->request_fn for request-based dm.
* Called with the queue lock held.
@@ -1657,14 +1672,21 @@ static void dm_request_fn(struct request_queue *q)
pos = blk_rq_pos(rq);
ti = dm_table_find_target(map, pos);
- BUG_ON(!dm_target_is_valid(ti));
+ if (!dm_target_is_valid(ti)) {
+ /*
+ * Must perform setup, that dm_done() requires,
+ * before calling dm_kill_unmapped_request
+ */
+ DMERR_LIMIT("request attempted access beyond the end of device");
+ clone = dm_start_request(md, rq);
+ dm_kill_unmapped_request(clone, -EIO);
+ continue;
+ }
if (ti->type->busy && ti->type->busy(ti))
goto delay_and_out;
- blk_start_request(rq);
- clone = rq->special;
- atomic_inc(&md->pending[rq_data_dir(clone)]);
+ clone = dm_start_request(md, rq);
spin_unlock(q->queue_lock);
if (map_request(ti, clone, md))
@@ -1684,8 +1706,6 @@ delay_and_out:
blk_delay_queue(q, HZ / 10);
out:
dm_table_put(map);
-
- return;
}
int dm_underlying_device_busy(struct request_queue *q)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Cox <[email protected]>
commit 8a55ade76551e3927b4e41ee9e7751875d18bc25 upstream.
Allocate a structure not a pointer to it !
Signed-off-by: Alan Cox <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hid-logitech-dj.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 0f9c146..4d524b5 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -439,7 +439,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
struct dj_report *dj_report;
int retval;
- dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
dj_report->report_id = REPORT_ID_DJ_SHORT;
@@ -456,7 +456,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report;
int retval;
- dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
dj_report->report_id = REPORT_ID_DJ_SHORT;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nestor Lopez Casado <[email protected]>
commit 596264082f10dd4a567c43d4526b2f54ac5520bc upstream.
This patch fixes an issue introduced after commit 4ea5454203d991ec
("HID: Fix race condition between driver core and ll-driver").
After that commit, hid-core discards any incoming packet that arrives while
hid driver's probe function is being executed.
This broke the enumeration process of hid-logitech-dj, that must receive
control packets in-band with the mouse and keyboard packets. Discarding mouse
or keyboard data at the very begining is usually fine, but it is not the case
for control packets.
This patch forces a re-enumeration of the paired devices when a packet arrives
that comes from an unknown device.
Based on a patch originally written by Benjamin Tissoires.
Signed-off-by: Nestor Lopez Casado <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hid-logitech-dj.c | 45 +++++++++++++++++++++++++++++++++++++++++
drivers/hid/hid-logitech-dj.h | 1 +
2 files changed, 46 insertions(+)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 4d524b5..9500f2f 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -193,6 +193,7 @@ static struct hid_ll_driver logi_dj_ll_driver;
static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
size_t count,
unsigned char report_type);
+static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);
static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
@@ -233,6 +234,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] &
SPFUNCTION_DEVICE_LIST_EMPTY) {
dbg_hid("%s: device list is empty\n", __func__);
+ djrcv_dev->querying_devices = false;
return;
}
@@ -243,6 +245,12 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
return;
}
+ if (djrcv_dev->paired_dj_devices[dj_report->device_index]) {
+ /* The device is already known. No need to reallocate it. */
+ dbg_hid("%s: device is already known\n", __func__);
+ return;
+ }
+
dj_hiddev = hid_allocate_device();
if (IS_ERR(dj_hiddev)) {
dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n",
@@ -306,6 +314,7 @@ static void delayedwork_callback(struct work_struct *work)
struct dj_report dj_report;
unsigned long flags;
int count;
+ int retval;
dbg_hid("%s\n", __func__);
@@ -338,6 +347,25 @@ static void delayedwork_callback(struct work_struct *work)
logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report);
break;
default:
+ /* A normal report (i. e. not belonging to a pair/unpair notification)
+ * arriving here, means that the report arrived but we did not have a
+ * paired dj_device associated to the report's device_index, this
+ * means that the original "device paired" notification corresponding
+ * to this dj_device never arrived to this driver. The reason is that
+ * hid-core discards all packets coming from a device while probe() is
+ * executing. */
+ if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) {
+ /* ok, we don't know the device, just re-ask the
+ * receiver for the list of connected devices. */
+ retval = logi_dj_recv_query_paired_devices(djrcv_dev);
+ if (!retval) {
+ /* everything went fine, so just leave */
+ break;
+ }
+ dev_err(&djrcv_dev->hdev->dev,
+ "%s:logi_dj_recv_query_paired_devices "
+ "error:%d\n", __func__, retval);
+ }
dbg_hid("%s: unexpected report type\n", __func__);
}
}
@@ -368,6 +396,12 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev,
if (!djdev) {
dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]"
" is NULL, index %d\n", dj_report->device_index);
+ kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
+
+ if (schedule_work(&djrcv_dev->work) == 0) {
+ dbg_hid("%s: did not schedule the work item, was already "
+ "queued\n", __func__);
+ }
return;
}
@@ -398,6 +432,12 @@ static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev,
if (dj_device == NULL) {
dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]"
" is NULL, index %d\n", dj_report->device_index);
+ kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
+
+ if (schedule_work(&djrcv_dev->work) == 0) {
+ dbg_hid("%s: did not schedule the work item, was already "
+ "queued\n", __func__);
+ }
return;
}
@@ -439,6 +479,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
struct dj_report *dj_report;
int retval;
+ /* no need to protect djrcv_dev->querying_devices */
+ if (djrcv_dev->querying_devices)
+ return 0;
+
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
@@ -450,6 +494,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
return retval;
}
+
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h
index fd28a5e..4a40003 100644
--- a/drivers/hid/hid-logitech-dj.h
+++ b/drivers/hid/hid-logitech-dj.h
@@ -101,6 +101,7 @@ struct dj_receiver_dev {
struct work_struct work;
struct kfifo notif_fifo;
spinlock_t lock;
+ bool querying_devices;
};
struct dj_device {
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <[email protected]>
commit 35495173e1df621dff0e9a244accbe32cd28a98f upstream.
Since commit eb92044eb (ARM i.MX3: Make ccm base address a variable )
it is necessary to pass the CCM register base as a variable.
Fix the CCM register access in mach-armadillo5x0 by passing mx3_ccm_base and
avoid illegal accesses.
Also applies to v3.5
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
arch/arm/mach-imx/mach-armadillo5x0.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 2c6ab32..5985ed1 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void)
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
/* set NAND page size to 2k if not configured via boot mode pins */
- __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+ __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
+ (1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
/* RTC */
/* Get RTC IRQ and register the chip */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Layton <[email protected]>
commit c73f693989d7a7d99ec66a7065295a0c93d0b127 upstream.
This function returns the wrong value, which causes the callers to get
the length of the resulting pathname wrong when it contains non-ASCII
characters.
This seems to fix https://bugzilla.samba.org/show_bug.cgi?id=6767
Reported-by: Baldvin Kovacs <[email protected]>
Reported-and-Tested-by: Nicolas Lefebvre <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Steve French <[email protected]>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
---
fs/cifs/cifs_unicode.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -327,6 +327,6 @@ cifsConvertToUCS(__le16 *target, const c
}
ctoUCS_out:
- return i;
+ return j;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nestor Lopez Casado <[email protected]>
commit 765031668fb2b064aebd9a568e5ad794cbe3413a upstream.
The user can only experience the bug if she pairs 6 devices to a Unifying
receiver. The sixth paired device would not work.
The value changed is actually a bitmask that enables reporting from each
paired device. As the sixth bit was not set, the sixth device reports are
ignored by the receiver and never get to the driver.
Signed-off-by: Nestor Lopez Casado <[email protected]>
drivers/hid/hid-logitech-dj.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hid-logitech-dj.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 38b12e4..2b56efc 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -445,7 +445,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
dj_report.report_id = REPORT_ID_DJ_SHORT;
dj_report.device_index = 0xFF;
dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x1F;
+ dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
return logi_dj_recv_send_report(djrcv_dev, &dj_report);
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Leach <[email protected]>
commit e1e5b7e4251c7538ca08c2c5545b0c2fbd8a6635 upstream.
This patch zeroes the SCTLR.TRE bit prior to setting the mapping as
cacheable for ARMv7 cores in the decompressor, ensuring that the
memory region attributes are obtained from the C and B bits, not from
the page tables.
Cc: Nicolas Pitre <[email protected]>
Reviewed-by: Will Deacon <[email protected]>
Signed-off-by: Matthew Leach <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
arch/arm/boot/compressed/head.S | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 81769c1..bc67cbf 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -653,6 +653,7 @@ __armv7_mmu_cache_on:
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ bic r0, r0, #1 << 28 @ clear SCTLR.TRE
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
#ifdef CONFIG_MMU
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "[email protected]" <[email protected]>
commit 10cce6d8b5af0b32bc4254ae4a28423a74c0921c upstream.
This patch checks whether HBA is SAS2008 B0 controller.
if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX,
as SAS2008 B0 controller doesn't support MSIX interrupts.
[jejb: fix whitespace problems]
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/scsi/mpt2sas/mpt2sas_base.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index b25757d..9d5a56c 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1209,6 +1209,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
u16 message_control;
+ /* Check whether controller SAS2008 B0 controller,
+ if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+ ioc->pdev->revision == 0x01) {
+ return -EINVAL;
+ }
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Xingchao <[email protected]>
commit b98b60167279df3acac9422c3c9820d9ebbcf9fb upstream.
Clear Audio Enable bit to trigger unsolicated event to notify Audio
Driver part the HDMI hot plug change. The patch fixed the bug when
remove HDMI cable the bit was not cleared correctly.
In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will
be set to trigger unsolicated event to notify Alsa driver the change.
intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after
remove the hdmi cable, here's debug log:
[ 187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2
[ 187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0
so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this
cause the eld infomation and pin presence doesnot update accordingly in alsa driver side.
This patch will also trigger unsolicated event to alsa driver to notify the hot plug event:
[ 187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[ 187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
Signed-off-by: Wang Xingchao <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/gpu/drm/i915/intel_hdmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 98f6024..12dc330 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -609,7 +609,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
u32 temp;
u32 enable_bits = SDVO_ENABLE;
- if (intel_hdmi->has_audio)
+ if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON)
enable_bits |= SDVO_AUDIO_ENABLE;
temp = I915_READ(intel_hdmi->sdvox_reg);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Wilson <[email protected]>
commit 7e81a42e341a4f15d76624b7c02ffb21b085b56f upstream.
Pin-leaks persist and we get the perennial bug reports of machine
lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that
the object cannot be pinned at that time it should prevent the driver from
locking up, and hopefully restore a semblance of working whilst still
leaving us a OOPS to debug.
Signed-off-by: Chris Wilson <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/gpu/drm/i915/i915_gem.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3357,7 +3357,8 @@ i915_gem_object_pin(struct drm_i915_gem_
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
- BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
+ if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT))
+ return -EBUSY;
WARN_ON(i915_verify_lists(dev));
if (obj->gtt_space != NULL) {
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eddie Wai <[email protected]>
commit d6532207116307eb7ecbfa7b9e02c53230096a50 upstream.
This patch fixes the following kernel panic invoked by uninitialized fields
in the chip initialization for the 1G bnx2 iSCSI offload.
One of the bits in the chip initialization is being used by the latest
firmware to control overflow packets. When this control bit gets enabled
erroneously, it would ultimately result in a bad packet placement which would
cause the bnx2 driver to dereference a NULL ptr in the placement handler.
This can happen under certain stress I/O environment under the Linux
iSCSI offload operation.
This change only affects Broadcom's 5709 chipset.
Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP:
[<ffffffff881f0e7d>] :bnx2:bnx2_poll_work+0xd0d/0x13c5
Pid: 0, comm: swapper Tainted: G ---- 2.6.18-333.el5debug #2
RIP: 0010:[<ffffffff881f0e7d>] [<ffffffff881f0e7d>] :bnx2:bnx2_poll_work+0xd0d/0x13c5
RSP: 0018:ffff8101b575bd50 EFLAGS: 00010216
RAX: 0000000000000005 RBX: ffff81007c5fb180 RCX: 0000000000000000
RDX: 0000000000000ffc RSI: 00000000817e8000 RDI: 0000000000000220
RBP: ffff81015bbd7ec0 R08: ffff8100817e9000 R09: 0000000000000000
R10: ffff81007c5fb180 R11: 00000000000000c8 R12: 000000007a25a010
R13: 0000000000000000 R14: 0000000000000005 R15: ffff810159f80558
FS: 0000000000000000(0000) GS:ffff8101afebc240(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 0000000000201000 CR4: 00000000000006a0
Process swapper (pid: 0, threadinfo ffff8101b5754000, task ffff8101afebd820)
Stack: 000000000000000b ffff810159f80000 0000000000000040 ffff810159f80520
ffff810159f80500 00cf00cf8008e84b ffffc200100939e0 ffff810009035b20
0000502900000000 000000be00000001 ffff8100817e7810 00d08101b575bea8
Call Trace:
<IRQ> [<ffffffff8008e0d0>] show_schedstat+0x1c2/0x25b
[<ffffffff881f1886>] :bnx2:bnx2_poll+0xf6/0x231
[<ffffffff8000c9b9>] net_rx_action+0xac/0x1b1
[<ffffffff800125a0>] __do_softirq+0x89/0x133
[<ffffffff8005e30c>] call_softirq+0x1c/0x28
[<ffffffff8006d5de>] do_softirq+0x2c/0x7d
[<ffffffff8006d46e>] do_IRQ+0xee/0xf7
[<ffffffff8005d625>] ret_from_intr+0x0/0xa
<EOI> [<ffffffff801a5780>] acpi_processor_idle_simple+0x1c5/0x341
[<ffffffff801a573d>] acpi_processor_idle_simple+0x182/0x341
[<ffffffff801a55bb>] acpi_processor_idle_simple+0x0/0x341
[<ffffffff80049560>] cpu_idle+0x95/0xb8
[<ffffffff80078b1c>] start_secondary+0x479/0x488
Signed-off-by: Eddie Wai <[email protected]>
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/scsi/bnx2i/bnx2i_hwi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 33d6630..91eec60 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1264,6 +1264,9 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
int rc = 0;
u64 mask64;
+ memset(&iscsi_init, 0x00, sizeof(struct iscsi_kwqe_init1));
+ memset(&iscsi_init2, 0x00, sizeof(struct iscsi_kwqe_init2));
+
bnx2i_adjust_qp_size(hba);
iscsi_init.flags =
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Luis R. Rodriguez" <[email protected]>
commit a85d0d7f3460b1a123b78e7f7e39bf72c37dfb78 upstream.
When call_crda() is called we kick off a witch hunt search
for the same regulatory domain on our internal regulatory
database and that work gets kicked off on a workqueue, this
is done while the cfg80211_mutex is held. If that workqueue
kicks off it will first lock reg_regdb_search_mutex and
later cfg80211_mutex but to ensure two CPUs will not contend
against cfg80211_mutex the right thing to do is to have the
reg_regdb_search() wait until the cfg80211_mutex is let go.
The lockdep report is pasted below.
cfg80211: Calling CRDA to update world regulatory domain
======================================================
[ INFO: possible circular locking dependency detected ]
3.3.8 #3 Tainted: G O
-------------------------------------------------------
kworker/0:1/235 is trying to acquire lock:
(cfg80211_mutex){+.+...}, at: [<816468a4>] set_regdom+0x78c/0x808 [cfg80211]
but task is already holding lock:
(reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (reg_regdb_search_mutex){+.+...}:
[<800a8384>] lock_acquire+0x60/0x88
[<802950a8>] mutex_lock_nested+0x54/0x31c
[<81645778>] is_world_regdom+0x9f8/0xc74 [cfg80211]
-> #1 (reg_mutex#2){+.+...}:
[<800a8384>] lock_acquire+0x60/0x88
[<802950a8>] mutex_lock_nested+0x54/0x31c
[<8164539c>] is_world_regdom+0x61c/0xc74 [cfg80211]
-> #0 (cfg80211_mutex){+.+...}:
[<800a77b8>] __lock_acquire+0x10d4/0x17bc
[<800a8384>] lock_acquire+0x60/0x88
[<802950a8>] mutex_lock_nested+0x54/0x31c
[<816468a4>] set_regdom+0x78c/0x808 [cfg80211]
other info that might help us debug this:
Chain exists of:
cfg80211_mutex --> reg_mutex#2 --> reg_regdb_search_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(reg_regdb_search_mutex);
lock(reg_mutex#2);
lock(reg_regdb_search_mutex);
lock(cfg80211_mutex);
*** DEADLOCK ***
3 locks held by kworker/0:1/235:
#0: (events){.+.+..}, at: [<80089a00>] process_one_work+0x230/0x460
#1: (reg_regdb_work){+.+...}, at: [<80089a00>] process_one_work+0x230/0x460
#2: (reg_regdb_search_mutex){+.+...}, at: [<81646828>] set_regdom+0x710/0x808 [cfg80211]
stack backtrace:
Call Trace:
[<80290fd4>] dump_stack+0x8/0x34
[<80291bc4>] print_circular_bug+0x2ac/0x2d8
[<800a77b8>] __lock_acquire+0x10d4/0x17bc
[<800a8384>] lock_acquire+0x60/0x88
[<802950a8>] mutex_lock_nested+0x54/0x31c
[<816468a4>] set_regdom+0x78c/0x808 [cfg80211]
Reported-by: Felix Fietkau <[email protected]>
Tested-by: Felix Fietkau <[email protected]>
Signed-off-by: Luis R. Rodriguez <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/wireless/reg.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 2ded3c7..72d170c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -350,6 +350,9 @@ static void reg_regdb_search(struct work_struct *work)
struct reg_regdb_search_request *request;
const struct ieee80211_regdomain *curdom, *regdom;
int i, r;
+ bool set_reg = false;
+
+ mutex_lock(&cfg80211_mutex);
mutex_lock(®_regdb_search_mutex);
while (!list_empty(®_regdb_search_list)) {
@@ -365,9 +368,7 @@ static void reg_regdb_search(struct work_struct *work)
r = reg_copy_regd(®dom, curdom);
if (r)
break;
- mutex_lock(&cfg80211_mutex);
- set_regdom(regdom);
- mutex_unlock(&cfg80211_mutex);
+ set_reg = true;
break;
}
}
@@ -375,6 +376,11 @@ static void reg_regdb_search(struct work_struct *work)
kfree(request);
}
mutex_unlock(®_regdb_search_mutex);
+
+ if (set_reg)
+ set_regdom(regdom);
+
+ mutex_unlock(&cfg80211_mutex);
}
static DECLARE_WORK(reg_regdb_work, reg_regdb_search);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rustad, Mark D" <[email protected]>
commit 734b65417b24d6eea3e3d7457e1f11493890ee1d upstream.
This change eliminates an initialization-order hazard most
recently seen when netprio_cgroup is built into the kernel.
With thanks to Eric Dumazet for catching a bug.
Signed-off-by: Mark Rustad <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/core/dev.c | 3 ++-
net/core/net_namespace.c | 4 +++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 0f28a9e..1cb0d8a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6283,7 +6283,8 @@ static struct hlist_head *netdev_create_hash(void)
/* Initialize per network namespace state */
static int __net_init netdev_init(struct net *net)
{
- INIT_LIST_HEAD(&net->dev_base_head);
+ if (net != &init_net)
+ INIT_LIST_HEAD(&net->dev_base_head);
net->dev_name_head = netdev_create_hash();
if (net->dev_name_head == NULL)
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index dddbacb..42f1e1c 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -27,7 +27,9 @@ static DEFINE_MUTEX(net_mutex);
LIST_HEAD(net_namespace_list);
EXPORT_SYMBOL_GPL(net_namespace_list);
-struct net init_net;
+struct net init_net = {
+ .dev_base_head = LIST_HEAD_INIT(init_net.dev_base_head),
+};
EXPORT_SYMBOL(init_net);
#define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 4e21f4eaa49f78d3e977e316514c941053871c76 upstream.
The 'name' sysfs attribute is mandatory for hwmon devices, but was missing
in this driver.
Cc: Paul Thomas <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Acked-by: Jean Delvare <[email protected]>
Acked-by: Paul Thomas <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hwmon/ads7871.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index e65c6e4..7bf4ce3 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -139,6 +139,12 @@ static ssize_t show_voltage(struct device *dev,
}
}
+static ssize_t ads7871_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
+}
+
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2);
@@ -148,6 +154,8 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5);
static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6);
static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7);
+static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL);
+
static struct attribute *ads7871_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
@@ -157,6 +165,7 @@ static struct attribute *ads7871_attributes[] = {
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
+ &dev_attr_name.attr,
NULL
};
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sachin Kamat <[email protected]>
commit 61c6e7531d3b66b33187b8cdd700fd8ab93ffd62 upstream.
kzalloc could return NULL. Hence add a check to avoid
NULL pointer dereference.
Signed-off-by: Sachin Kamat <[email protected]>
Acked-by: Jassi Brar <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
[bwh: Backported to 3.2: adjust context and error label]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/dma/pl330.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -858,6 +858,11 @@ pl330_probe(struct amba_device *adev, co
/* Initialize channel parameters */
num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
+ if (!pdmac->peripherals) {
+ ret = -ENOMEM;
+ dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n");
+ goto probe_err4;
+ }
for (i = 0; i < num_chan; i++) {
pch = &pdmac->peripherals[i];
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <[email protected]>
commit bd49940a35ec7d488ae63bd625639893b3385b97 upstream.
As the initial domain we are able to search/map certain regions
of memory to harvest configuration data. For all low-level we
use ACPI tables - for interrupts we use exclusively ACPI _PRT
(so DSDT) and MADT for INT_SRC_OVR.
The SMP MP table is not used at all. As a matter of fact we do
not even support machines that only have SMP MP but no ACPI tables.
Lets follow how Moorestown does it and just disable searching
for BIOS SMP tables.
This also fixes an issue on HP Proliant BL680c G5 and DL380 G6:
9f->100 for 1:1 PTE
Freeing 9f-100 pfn range: 97 pages freed
1-1 mapping on 9f->100
.. snip..
e820: BIOS-provided physical RAM map:
Xen: [mem 0x0000000000000000-0x000000000009efff] usable
Xen: [mem 0x000000000009f400-0x00000000000fffff] reserved
Xen: [mem 0x0000000000100000-0x00000000cfd1dfff] usable
.. snip..
Scan for SMP in [mem 0x00000000-0x000003ff]
Scan for SMP in [mem 0x0009fc00-0x0009ffff]
Scan for SMP in [mem 0x000f0000-0x000fffff]
found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
(XEN) mm.c:908:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 entry 0000000000100461 for l1e_owner=0, pg_owner=0
(XEN) mm.c:4995:d0 ptwr_emulate: could not get_page_from_l1e()
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81ac07e2>] xen_set_pte_init+0x66/0x71
. snip..
Pid: 0, comm: swapper Not tainted 3.6.0-rc6upstream-00188-gb6fb969-dirty #2 HP ProLiant BL680c G5
.. snip..
Call Trace:
[<ffffffff81ad31c6>] __early_ioremap+0x18a/0x248
[<ffffffff81624731>] ? printk+0x48/0x4a
[<ffffffff81ad32ac>] early_ioremap+0x13/0x15
[<ffffffff81acc140>] get_mpc_size+0x2f/0x67
[<ffffffff81acc284>] smp_scan_config+0x10c/0x136
[<ffffffff81acc2e4>] default_find_smp_config+0x36/0x5a
[<ffffffff81ac3085>] setup_arch+0x5b3/0xb5b
[<ffffffff81624731>] ? printk+0x48/0x4a
[<ffffffff81abca7f>] start_kernel+0x90/0x390
[<ffffffff81abc356>] x86_64_start_reservations+0x131/0x136
[<ffffffff81abfa83>] xen_start_kernel+0x65f/0x661
(XEN) Domain 0 crashed: 'noreboot' set - not rebooting.
which is that ioremap would end up mapping 0xff using _PAGE_IOMAP
(which is what early_ioremap sticks as a flag) - which meant
we would get MFN 0xFF (pte ff461, which is OK), and then it would
also map 0x100 (b/c ioremap tries to get page aligned request, and
it was trying to map 0xf4fa0 + PAGE_SIZE - so it mapped the next page)
as _PAGE_IOMAP. Since 0x100 is actually a RAM page, and the _PAGE_IOMAP
bypasses the P2M lookup we would happily set the PTE to 1000461.
Xen would deny the request since we do not have access to the
Machine Frame Number (MFN) of 0x100. The P2M[0x100] is for example
0x80140.
Fixes-Oracle-Bugzilla: https://bugzilla.oracle.com/bugzilla/show_bug.cgi?id=13665
Acked-by: Jan Beulich <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
---
arch/x86/xen/enlighten.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1289,6 +1289,10 @@ asmlinkage void __init xen_start_kernel(
/* Make sure ACS will be enabled */
pci_request_acs();
+
+ /* Avoid searching for BIOS MP tables */
+ x86_init.mpparse.find_smp_config = x86_init_noop;
+ x86_init.mpparse.get_smp_config = x86_init_uint_noop;
}
#ifdef CONFIG_PCI
/* PCI BIOS service won't work from a PV guest. */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Søren Holm <[email protected]>
commit ed3770a9cd5764a575b83810ea679bbff2b03082 upstream.
Signed-off-by: Søren Holm <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/usb/asix.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1648,6 +1648,10 @@ static const struct usb_device_id produc
USB_DEVICE (0x2001, 0x3c05),
.driver_info = (unsigned long) &ax88772_info,
}, {
+ // DLink DUB-E100 H/W Ver C1
+ USB_DEVICE (0x2001, 0x1a02),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
// Linksys USB1000
USB_DEVICE (0x1737, 0x0039),
.driver_info = (unsigned long) &ax88178_info,
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck <[email protected]>
commit 3ceefe4319636d89d4bdf40dca9471970f942e4f upstream.
The 'name' sysfs attribute is mandatory for hwmon devices, but was missing
in this driver.
Cc: Jonathan Cameron <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Acked-by: Jean Delvare <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hwmon/ad7314.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index cfec802..f915eb1 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -87,10 +87,18 @@ static ssize_t ad7314_show_temperature(struct device *dev,
}
}
+static ssize_t ad7314_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, ad7314_show_name, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
ad7314_show_temperature, NULL, 0);
static struct attribute *ad7314_attributes[] = {
+ &dev_attr_name.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
NULL,
};
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Stephen M. Cameron" <[email protected]>
commit 256d0eaac87da1e993190846064f339f4c7a63f5 upstream.
If a command status of CMD_PROTOCOL_ERR is received, this
information should be conveyed to the SCSI mid layer, not
dropped on the floor. CMD_PROTOCOL_ERR may be received
from the Smart Array for any commands destined for an external
RAID controller such as a P2000, or commands destined for tape
drives or CD/DVD-ROM drives, if for instance a cable is
disconnected. This mostly affects multipath configurations, as
disconnecting a cable on a non-multipath configuration is not
going to do anything good regardless of whether CMD_PROTOCOL_ERR
is handled correctly or not. Not handling CMD_PROTOCOL_ERR
correctly in a multipath configaration involving external RAID
controllers may cause data corruption, so this is quite a serious
bug. This bug should not normally cause a problem for direct
attached disk storage.
Signed-off-by: Stephen M. Cameron <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/scsi/hpsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 796482b..2b4261c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1315,8 +1315,9 @@ static void complete_scsi_command(struct CommandList *cp)
}
break;
case CMD_PROTOCOL_ERR:
+ cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "cp %p has "
- "protocol error \n", cp);
+ "protocol error\n", cp);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Ira W. Snyder" <[email protected]>
commit e21093ef6fb4cbecdf926102286dbe280ae965db upstream.
The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for
the reset registers. To support older hardware, the code is changed to
use the hardware reset register on the Janz VMOD-ICAN3 hardware itself.
Signed-off-by: Ira W. Snyder <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/can/janz-ican3.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 98ee438..7edadee 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id)
*/
static int ican3_reset_module(struct ican3_dev *mod)
{
- u8 val = 1 << mod->num;
unsigned long start;
u8 runold, runnew;
@@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod)
runold = ioread8(mod->dpm + TARGET_RUNNING);
/* reset the module */
- iowrite8(val, &mod->ctrl->reset_assert);
- iowrite8(val, &mod->ctrl->reset_deassert);
+ iowrite8(0x00, &mod->dpmctrl->hwreset);
/* wait until the module has finished resetting and is running */
start = jiffies;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anisse Astier <[email protected]>
commit 8669cf6793bb38307a30fb6b9565ddc8840ebd3f upstream.
On Toshiba Satellite C850D, the touchpad and the keyboard might randomly
not work at boot. Preventing MUX mode activation solves this issue.
Signed-off-by: Anisse Astier <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 6918773..d6cc77a 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -335,6 +335,12 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
},
{
.matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"),
+ },
+ },
+ {
+ .matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
},
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wen Congyang <[email protected]>
commit 85f2a2ef1d0ab99523e0b947a2b723f5650ed6aa upstream.
When allocating memory fails, page is NULL. page_to_pfn() will
cause the kernel panicked if we don't use sparsemem vmemmap.
Link: http://lkml.kernel.org/r/[email protected]
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Reviewed-by: Minchan Kim <[email protected]>
Signed-off-by: Wen Congyang <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
include/trace/events/kmem.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index 5f889f1..08fa272 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -214,7 +214,7 @@ TRACE_EVENT(mm_page_alloc,
TP_printk("page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s",
__entry->page,
- page_to_pfn(__entry->page),
+ __entry->page ? page_to_pfn(__entry->page) : 0,
__entry->order,
__entry->migratetype,
show_gfp_flags(__entry->gfp_flags))
@@ -240,7 +240,7 @@ DECLARE_EVENT_CLASS(mm_page,
TP_printk("page=%p pfn=%lu order=%u migratetype=%d percpu_refill=%d",
__entry->page,
- page_to_pfn(__entry->page),
+ __entry->page ? page_to_pfn(__entry->page) : 0,
__entry->order,
__entry->migratetype,
__entry->order == 0)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel J Blueman <[email protected]>
commit c531077f40abc9f2129c4c83a30b3f8d6ce1c0e7 upstream.
When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure,
interface errors are always seen until 1.5Gbps is negotiated [1]. This
occurs using any disk in the enclosure, and when the disk is connected
directly with a generic passive eSATAp cable, we see stable 3Gbps
operation as expected.
Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset
and renegotiation incurs.
Signed-off-by: Daniel J Blueman <[email protected]>
Signed-off-by: Jeff Garzik <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/ata/libata-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c14f88c..95a656f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4129,6 +4129,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+ { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, },
/*
* Devices which choke on SETXFER. Applies only if both the
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Kleine-Budde <[email protected]>
commit ab04c8bd423edb03e2148350a091836c196107fc upstream.
This patch fixes an oops which occurs when unloading the driver, while the
network interface is still up. The problem is that first the io mapping is
teared own, then the CAN device is unregistered, resulting in accessing the
hardware's iomem:
[ 172.744232] Unable to handle kernel paging request at virtual address c88b0040
[ 172.752441] pgd = c7be4000
[ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000
[ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM
[ 172.767517] Modules linked in: ti_hecc(-) can_dev
[ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126)
[ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc]
[ 172.784423] LR is at __dev_close_many+0x90/0xc0
[ 172.789123] pc : [<bf00c768>] lr : [<c033be58>] psr: 60000013
[ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000
[ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100
[ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000
[ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000
[ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015
[ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0)
[ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000)
[ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58
[ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44
[ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724
[ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000
[ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc
[ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000
[ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c
[ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4
[ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006
[ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068
[ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008
[ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000
[ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344
[ 172.954498] [<bf00c768>] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [<c033be58>] (__dev__registered_many+0xc0/0x2a0)
[ 172.984161] [<c033c098>] (rollback_registered_many+0xc0/0x2a0) from [<c033c2f8>] (rollback_registered+0x20/0x30)
[ 172.994750] [<c033c2f8>] (rollback_registered+0x20/0x30) from [<c033c370>] (unregister_netdevice_queue+0x68/0x98)
[ 173.005401] [<c033c370>] (unregister_netdevice_queue+0x68/0x98) from [<c033c3b8>] (unregister_netdev+0x18/0x20)
[ 173.015899] [<c033c3b8>] (unregister_netdev+0x18/0x20) from [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc])
[ 173.026245] [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [<c02842dc>] (platform_drv_remove+0x14/0x18)
[ 173.036712] [<c02842dc>] (platform_drv_remove+0x14/0x18) from [<c0282f90>] (__device_release_driver+0x7c/0xbc)
Cc: Anant Gole <[email protected]>
Tested-by: Jan Luebbe <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/can/ti_hecc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 527dbcf..9ded21e 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -984,12 +984,12 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct ti_hecc_priv *priv = netdev_priv(ndev);
+ unregister_candev(ndev);
clk_disable(priv->clk);
clk_put(priv->clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iounmap(priv->base);
release_mem_region(res->start, resource_size(res));
- unregister_candev(ndev);
free_candev(ndev);
platform_set_drvdata(pdev, NULL);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Herrmann <[email protected]>
commit 5f0ecb907deb1e6f28071ee3bd568903b9da1be4 upstream.
The quirk introduced with commit
00250ec90963b7ef6678438888f3244985ecde14 (hwmon: fam15h_power: fix
bogus values with current BIOSes) is not only required during driver
load but also when system resumes from suspend. The BIOS might set the
previously recommended (but unsuitable) initilization value for the
running average range register during resume.
Signed-off-by: Andreas Herrmann <[email protected]>
Tested-by: Andreas Hartmann <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hwmon/fam15h_power.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -128,12 +128,12 @@ static bool __devinit fam15h_power_is_in
* counter saturations resulting in bogus power readings.
* We correct this value ourselves to cope with older BIOSes.
*/
-static DEFINE_PCI_DEVICE_TABLE(affected_device) = {
+static const struct pci_device_id affected_device[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{ 0 }
};
-static void __devinit tweak_runavg_range(struct pci_dev *pdev)
+static void tweak_runavg_range(struct pci_dev *pdev)
{
u32 val;
@@ -157,6 +157,16 @@ static void __devinit tweak_runavg_range
REG_TDP_RUNNING_AVERAGE, val);
}
+#ifdef CONFIG_PM
+static int fam15h_power_resume(struct pci_dev *pdev)
+{
+ tweak_runavg_range(pdev);
+ return 0;
+}
+#else
+#define fam15h_power_resume NULL
+#endif
+
static void __devinit fam15h_power_init_data(struct pci_dev *f4,
struct fam15h_power_data *data)
{
@@ -255,6 +265,7 @@ static struct pci_driver fam15h_power_dr
.id_table = fam15h_power_id_table,
.probe = fam15h_power_probe,
.remove = __devexit_p(fam15h_power_remove),
+ .resume = fam15h_power_resume,
};
static int __init fam15h_power_init(void)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roland Stigge <[email protected]>
commit b1268d3737c6316016026245eef276eda6b0a621 upstream.
For GPIOs of gpio-lpc32xx, gpio_direction_output() ignores the value argument
(initial value of output). This patch fixes this by setting the level
accordingly.
Signed-off-by: Roland Stigge <[email protected]>
Acked-by: Alexandre Pereira da Silva <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/gpio/gpio-lpc32xx.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 8a420f1..ed94b4e 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -308,6 +308,7 @@ static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
{
struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+ __set_gpio_level_p012(group, pin, value);
__set_gpio_dir_p012(group, pin, 0);
return 0;
@@ -318,6 +319,7 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
{
struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+ __set_gpio_level_p3(group, pin, value);
__set_gpio_dir_p3(group, pin, 0);
return 0;
@@ -326,6 +328,9 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
int value)
{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpo_level_p3(group, pin, value);
return 0;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <[email protected]>
commit 8d54db795dfb1049d45dc34f0dddbc5347ec5642 upstream.
The hypervisor is in charge of allocating the proper "NUMA" memory
and dealing with the CPU scheduler to keep them bound to the proper
NUMA node. The PV guests (and PVHVM) have no inkling of where they
run and do not need to know that right now. In the future we will
need to inject NUMA configuration data (if a guest spans two or more
NUMA nodes) so that the kernel can make the right choices. But those
patches are not yet present.
In the meantime, disable the NUMA capability in the PV guest, which
also fixes a bootup issue. Andre says:
"we see Dom0 crashes due to the kernel detecting the NUMA topology not
by ACPI, but directly from the northbridge (CONFIG_AMD_NUMA).
This will detect the actual NUMA config of the physical machine, but
will crash about the mismatch with Dom0's virtual memory. Variation of
the theme: Dom0 sees what it's not supposed to see.
This happens with the said config option enabled and on a machine where
this scanning is still enabled (K8 and Fam10h, not Bulldozer class)
We have this dump then:
NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10
Scanning NUMA topology in Northbridge 24
Number of physical nodes 4
Node 0 MemBase 0000000000000000 Limit 0000000040000000
Node 1 MemBase 0000000040000000 Limit 0000000138000000
Node 2 MemBase 0000000138000000 Limit 00000001f8000000
Node 3 MemBase 00000001f8000000 Limit 0000000238000000
Initmem setup node 0 0000000000000000-0000000040000000
NODE_DATA [000000003ffd9000 - 000000003fffffff]
Initmem setup node 1 0000000040000000-0000000138000000
NODE_DATA [0000000137fd9000 - 0000000137ffffff]
Initmem setup node 2 0000000138000000-00000001f8000000
NODE_DATA [00000001f095e000 - 00000001f0984fff]
Initmem setup node 3 00000001f8000000-0000000238000000
Cannot find 159744 bytes in node 3
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
Pid: 0, comm: swapper Not tainted 3.3.6 #1 AMD Dinar/Dinar
RIP: e030:[<ffffffff81d220e6>] [<ffffffff81d220e6>] __alloc_bootmem_node+0x43/0x96
.. snip..
[<ffffffff81d23024>] sparse_early_usemaps_alloc_node+0x64/0x178
[<ffffffff81d23348>] sparse_init+0xe4/0x25a
[<ffffffff81d16840>] paging_init+0x13/0x22
[<ffffffff81d07fbb>] setup_arch+0x9c6/0xa9b
[<ffffffff81683954>] ? printk+0x3c/0x3e
[<ffffffff81d01a38>] start_kernel+0xe5/0x468
[<ffffffff81d012cf>] x86_64_start_reservations+0xba/0xc1
[<ffffffff81007153>] ? xen_setup_runstate_info+0x2c/0x36
[<ffffffff81d050ee>] xen_start_kernel+0x565/0x56c
"
so we just disable NUMA scanning by setting numa_off=1.
Reported-and-Tested-by: Andre Przywara <[email protected]>
Acked-by: Andre Przywara <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
arch/x86/xen/setup.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -16,6 +16,7 @@
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/acpi.h>
+#include <asm/numa.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -431,4 +432,7 @@ void __init xen_arch_setup(void)
boot_option_idle_override = IDLE_HALT;
WARN_ON(set_pm_idle_to_default());
fiddle_vdso();
+#ifdef CONFIG_NUMA
+ numa_off = 1;
+#endif
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marc Dionne <[email protected]>
commit d8dc3494f77a5cc3b274bae36f7e74e85cf8a407 upstream.
On a system with a logitech wireless keyboard/mouse and DMA-API debugging
enabled, this warning appears at boot:
kernel: WARNING: at lib/dma-debug.c:929 check_for_stack.part.12+0x70/0xa7()
kernel: Hardware name: MS-7593
kernel: uhci_hcd 0000:00:1d.1: DMA-API: device driver maps memory fromstack [addr=ffff8801b0079c29]
Make logi_dj_recv_query_paired_devices and logi_dj_recv_switch_to_dj_mode
use a structure allocated with kzalloc rather than a stack based one.
Signed-off-by: Marc Dionne <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hid-logitech-dj.c | 38 ++++++++++++++++++++++++--------------
1 file changed, 24 insertions(+), 14 deletions(-)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 5e8a7ed..0f9c146 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -436,27 +436,37 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
- dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+ dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+ dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior <[email protected]>
commit 1b68a4ca2d038addb7314211d122fb6d7002b38b upstream.
If USB2 host controller probes fine but USB3 does not then we don't
remove the USB controller properly and lock up the system while the HUB
code will try to enumerate the USB2 controller and access memory which
is no longer available in case the dummy_hcd was compiled as a module.
This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc
for roothubs.) if used in USB3 mode because dummy does not provide this
descriptor and explodes later.
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/usb/gadget/dummy_hcd.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index b799106..0e58a46 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -2503,10 +2503,8 @@ static int dummy_hcd_probe(struct platform_device *pdev)
hs_hcd->has_tt = 1;
retval = usb_add_hcd(hs_hcd, 0, 0);
- if (retval != 0) {
- usb_put_hcd(hs_hcd);
- return retval;
- }
+ if (retval)
+ goto put_usb2_hcd;
if (mod_data.is_super_speed) {
ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
@@ -2525,6 +2523,8 @@ static int dummy_hcd_probe(struct platform_device *pdev)
put_usb3_hcd:
usb_put_hcd(ss_hcd);
dealloc_usb2_hcd:
+ usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
usb_put_hcd(hs_hcd);
the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mauro Carvalho Chehab <[email protected]>
commit deb09ddaff1435f72dd598d38f9b58354c68a5ec upstream.
Sandy bridge EDAC is calculating the memory size with overflow.
Basically, the size field and the integer calculation is using 32 bits.
More bits are needed, when the DIMM memories have high density.
The net result is that memories are improperly reported there, when
high-density DIMMs are used:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
As the number of pages value is handled at the EDAC core as unsigned
ints, the driver shows the 16 GB memories at sysfs interface as 16760832
MB! The fix is simple: calculate the number of pages as unsigned 64-bits
integer.
After the patch, the memory size (16 GB) is properly detected:
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
[bwh: Backported to 3.2:
- Adjust context
- Debug log function is debugf0(), not edac_dbg()]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/edac/sb_edac.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -554,7 +554,8 @@ static int get_dimm_config(const struct
{
struct sbridge_pvt *pvt = mci->pvt_info;
struct csrow_info *csr;
- int i, j, banks, ranks, rows, cols, size, npages;
+ unsigned i, j, banks, ranks, rows, cols, npages;
+ u64 size;
int csrow = 0;
unsigned long last_page = 0;
u32 reg;
@@ -626,10 +627,10 @@ static int get_dimm_config(const struct
cols = numcol(mtr);
/* DDR3 has 8 I/O banks */
- size = (rows * cols * banks * ranks) >> (20 - 3);
+ size = ((u64)rows * cols * banks * ranks) >> (20 - 3);
npages = MiB_TO_PAGES(size);
- debugf0("mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+ debugf0("mc#%d: channel %d, dimm %d, %Ld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
pvt->sbridge_dev->mc, i, j,
size, npages,
banks, ranks, rows, cols);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Milan Broz <[email protected]>
commit c3c4555edd10dbc0b388a0125b9c50de5e79af05 upstream.
Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
have it set. Otherwise devices with predictable characteristics may
contribute entropy.
QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings
contribute to the random pool.
For bio-based targets this flag is always 0 because such devices have no
real queue.
For request-based devices this flag was always set to 1 by default.
Now set it according to the flags on underlying devices. If there is at
least one device which should not contribute, set the flag to zero: If a
device, such as fast SSD storage, is not suitable for supplying entropy,
a request-based queue stacked over it will not be either.
Because the checking logic is exactly same as for the rotational flag,
share the iteration function with device_is_nonrot().
Signed-off-by: Milan Broz <[email protected]>
Signed-off-by: Alasdair G Kergon <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/md/dm-table.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index f900690..77b90ae 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1354,17 +1354,25 @@ static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
return q && blk_queue_nonrot(q);
}
-static bool dm_table_is_nonrot(struct dm_table *t)
+static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return q && !blk_queue_add_random(q);
+}
+
+static bool dm_table_all_devices_attribute(struct dm_table *t,
+ iterate_devices_callout_fn func)
{
struct dm_target *ti;
unsigned i = 0;
- /* Ensure that all underlying device are non-rotational. */
while (i < dm_table_get_num_targets(t)) {
ti = dm_table_get_target(t, i++);
if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, device_is_nonrot, NULL))
+ !ti->type->iterate_devices(ti, func, NULL))
return 0;
}
@@ -1396,7 +1404,8 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
if (!dm_table_discard_zeroes_data(t))
q->limits.discard_zeroes_data = 0;
- if (dm_table_is_nonrot(t))
+ /* Ensure that all underlying devices are non-rotational. */
+ if (dm_table_all_devices_attribute(t, device_is_nonrot))
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
else
queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
@@ -1404,6 +1413,15 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
dm_table_set_integrity(t);
/*
+ * Determine whether or not this queue's I/O timings contribute
+ * to the entropy pool, Only request-based targets use this.
+ * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
+ * have it set.
+ */
+ if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random))
+ queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
+
+ /*
* QUEUE_FLAG_STACKABLE must be set after all queue settings are
* visible to other CPUs because, once the flag is set, incoming bios
* are processed by request-based dm, which refers to the queue
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit 864745d291b5ba80ea0bd0edcbe67273de368836 ]
When dump_one_state() returns an error, e.g. because of a too small
buffer to dump the whole xfrm state, xfrm_state_netlink() returns NULL
instead of an error pointer. But its callers expect an error pointer
and therefore continue to operate on a NULL skbuff.
This could lead to a privilege escalation (execution of user code in
kernel context) if the attacker has CAP_NET_ADMIN and is able to map
address 0.
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 7cae73e..a092828 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -862,6 +862,7 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb,
{
struct xfrm_dump_info info;
struct sk_buff *skb;
+ int err;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!skb)
@@ -872,9 +873,10 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb,
info.nlmsg_seq = seq;
info.nlmsg_flags = 0;
- if (dump_one_state(x, 0, &info)) {
+ err = dump_one_state(x, 0, &info);
+ if (err) {
kfree_skb(skb);
- return NULL;
+ return ERR_PTR(err);
}
return skb;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <[email protected]>
commit 80b4812407c6b1f66a4f2430e69747a13f010839 upstream.
The 'enough' function is written to work with 'near' arrays only
in that is implicitly assumes that the offset from one 'group' of
devices to the next is the same as the number of copies.
In reality it is the number of 'near' copies.
So change it to make this number explicit.
This bug makes it possible to run arrays without enough drives
present, which is dangerous.
It is appropriate for an -stable kernel, but will almost certainly
need to be modified for some of them.
Reported-by: Jakub Husák <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
[bwh: Backported to 3.2: s/geo->/conf->/]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/md/raid10.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1226,14 +1226,16 @@ static int enough(struct r10conf *conf,
do {
int n = conf->copies;
int cnt = 0;
+ int this = first;
while (n--) {
- if (conf->mirrors[first].rdev &&
- first != ignore)
+ if (conf->mirrors[this].rdev &&
+ this != ignore)
cnt++;
- first = (first+1) % conf->raid_disks;
+ this = (this+1) % conf->raid_disks;
}
if (cnt == 0)
return 0;
+ first = (first + conf->near_copies) % conf->raid_disks;
} while (first != 0);
return 1;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu CASTET <[email protected]>
commit 4c7b417ecb756e85dfc955b0e7a04fd45585533e upstream.
If we don't read fast enough hidraw device, hidraw_report_event
will cycle and we will leak list->buffer.
Also list->buffer are not free on release.
After this patch, kmemleak report nothing.
Signed-off-by: Matthieu CASTET <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hidraw.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 36fa77b..3b6f7bf 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -96,6 +96,7 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
}
kfree(list->buffer[list->tail].value);
+ list->buffer[list->tail].value = NULL;
list->tail = (list->tail + 1) & (HIDRAW_BUFFER_SIZE - 1);
}
out:
@@ -300,6 +301,7 @@ static int hidraw_release(struct inode * inode, struct file * file)
struct hidraw *dev;
struct hidraw_list *list = file->private_data;
int ret;
+ int i;
mutex_lock(&minors_lock);
if (!hidraw_table[minor]) {
@@ -317,6 +319,9 @@ static int hidraw_release(struct inode * inode, struct file * file)
kfree(list->hidraw);
}
}
+
+ for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i)
+ kfree(list->buffer[i].value);
kfree(list);
ret = 0;
unlock:
@@ -446,12 +451,17 @@ int hidraw_report_event(struct hid_device *hid, u8 *data, int len)
int ret = 0;
list_for_each_entry(list, &dev->list, node) {
+ int new_head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
+
+ if (new_head == list->tail)
+ continue;
+
if (!(list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC))) {
ret = -ENOMEM;
break;
}
list->buffer[list->head].len = len;
- list->head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
+ list->head = new_head;
kill_fasync(&list->fasync, SIGIO, POLL_IN);
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 0d00dc2611abbe6ad244d50569c2ee82ce42846c upstream.
This patch (as1607) fixes a race that can occur if a USB host
controller is removed while a process is reading the
/sys/kernel/debug/usb/devices file.
The usb_device_read() routine uses the bus->root_hub pointer to
determine whether or not the root hub is registered. The is not a
valid test, because the pointer is set before the root hub gets
registered and remains set even after the root hub is unregistered and
deallocated. As a result, usb_device_read() or usb_device_dump() can
access freed memory, causing an oops.
The patch changes the test to use the hcd->rh_registered flag, which
does get set and cleared at the appropriate times. It also makes sure
to hold the usb_bus_list_lock mutex while setting the flag, so that
usb_device_read() will become aware of new root hubs as soon as they
are registered.
Signed-off-by: Alan Stern <[email protected]>
Reported-by: Don Zickus <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/usb/core/devices.c | 2 +-
drivers/usb/core/hcd.c | 6 ++----
2 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index d956965..3440812 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -624,7 +624,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf,
/* print devices for all busses */
list_for_each_entry(bus, &usb_bus_list, bus_list) {
/* recurse through all children of the root hub */
- if (!bus->root_hub)
+ if (!bus_to_hcd(bus)->rh_registered)
continue;
usb_lock_device(bus->root_hub);
ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos,
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index bc84106..75ba209 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1011,10 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd)
if (retval) {
dev_err (parent_dev, "can't register root hub for %s, %d\n",
dev_name(&usb_dev->dev), retval);
- }
- mutex_unlock(&usb_bus_list_lock);
-
- if (retval == 0) {
+ } else {
spin_lock_irq (&hcd_root_hub_lock);
hcd->rh_registered = 1;
spin_unlock_irq (&hcd_root_hub_lock);
@@ -1023,6 +1020,7 @@ static int register_root_hub(struct usb_hcd *hcd)
if (HCD_DEAD(hcd))
usb_hc_died (hcd); /* This time clean up */
}
+ mutex_unlock(&usb_bus_list_lock);
return retval;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Henrik Rydberg <[email protected]>
commit 1fa6535faf055cd71311ab887e94fc234f04ee18 upstream.
As pointed out by Gustavo and Marcel, all Apple-specific Broadcom
devices seen so far have the same interface class, subclass and
protocol numbers. This patch adds an entry which matches all of them,
using the new USB_VENDOR_AND_INTERFACE_INFO() macro.
In particular, this patch adds support for the MacBook Pro Retina
(05ac:8286), which is not in the present list.
Signed-off-by: Henrik Rydberg <[email protected]>
Tested-by: Shea Levy <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index e791b20..654e248 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -52,6 +52,9 @@ static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ /* Apple-specific (Broadcom) devices */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Zhong <[email protected]>
[Fixed upstream by commits 2955b47d2c1983998a8c5915cb96884e67f7cb53 and
a4683487f90bfe3049686fc5c566bdc1ad03ace6 from Dan Williams, but they are much
more intrusive than this tiny fix, according to Andrew - gregkh]
This patch tries to fix a dead loop in async_synchronize_full(), which
could be seen when preemption is disabled on a single cpu machine.
void async_synchronize_full(void)
{
do {
async_synchronize_cookie(next_cookie);
} while (!list_empty(&async_running) || !
list_empty(&async_pending));
}
async_synchronize_cookie() calls async_synchronize_cookie_domain() with
&async_running as the default domain to synchronize.
However, there might be some works in the async_pending list from other
domains. On a single cpu system, without preemption, there is no chance
for the other works to finish, so async_synchronize_full() enters a dead
loop.
It seems async_synchronize_full() wants to synchronize all entries in
all running lists(domains), so maybe we could just check the entry_count
to know whether all works are finished.
Currently, async_synchronize_cookie_domain() expects a non-NULL running
list ( if NULL, there would be NULL pointer dereference ), so maybe a
NULL pointer could be used as an indication for the functions to
synchronize all works in all domains.
Reported-by: Paul E. McKenney <[email protected]>
Signed-off-by: Li Zhong <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Tested-by: Christian Kujau <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Christian Kujau <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Cong Wang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
kernel/async.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -87,6 +87,13 @@ static async_cookie_t __lowest_in_progr
{
struct async_entry *entry;
+ if (!running) { /* just check the entry count */
+ if (atomic_read(&entry_count))
+ return 0; /* smaller than any cookie */
+ else
+ return next_cookie;
+ }
+
if (!list_empty(running)) {
entry = list_first_entry(running,
struct async_entry, list);
@@ -236,9 +243,7 @@ EXPORT_SYMBOL_GPL(async_schedule_domain)
*/
void async_synchronize_full(void)
{
- do {
- async_synchronize_cookie(next_cookie);
- } while (!list_empty(&async_running) || !list_empty(&async_pending));
+ async_synchronize_cookie_domain(next_cookie, NULL);
}
EXPORT_SYMBOL_GPL(async_synchronize_full);
@@ -258,7 +263,7 @@ EXPORT_SYMBOL_GPL(async_synchronize_full
/**
* async_synchronize_cookie_domain - synchronize asynchronous function calls within a certain domain with cookie checkpointing
* @cookie: async_cookie_t to use as checkpoint
- * @running: running list to synchronize on
+ * @running: running list to synchronize on, NULL indicates all lists
*
* This function waits until all asynchronous function calls for the
* synchronization domain specified by the running list @list submitted
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Schmidt <[email protected]>
[ Upstream commit e488921f44765e8ab6c48ca35e3f6b78df9819df ]
Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance
regression for IPv6. Rx checksum offload does not work. IPv6 packets
are passed to the stack with CHECKSUM_NONE.
The hardware obviously cannot perform IP checksum validation for IPv6,
because there is no checksum in the IPv6 header. This should not prevent
us from setting CHECKSUM_UNNECESSARY.
Tested on BCM57711.
Signed-off-by: Michal Schmidt <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Acked-by: Eilon Greenstein <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 2c1a5c0..4c50ac0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -554,14 +554,16 @@ static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe,
static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
struct bnx2x_fastpath *fp)
{
- /* Do nothing if no IP/L4 csum validation was done */
-
+ /* Do nothing if no L4 csum validation was done.
+ * We do not check whether IP csum was validated. For IPv4 we assume
+ * that if the card got as far as validating the L4 csum, it also
+ * validated the IP csum. IPv6 has no IP csum.
+ */
if (cqe->fast_path_cqe.status_flags &
- (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG |
- ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG))
+ ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)
return;
- /* If both IP/L4 validation were done, check if an error was found. */
+ /* If L4 validation was done, check if an error was found. */
if (cqe->fast_path_cqe.type_error_flags &
(ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Cooper <[email protected]>
commit 4188bba0e9e7ba58d231b528df495666f2742b74 upstream.
The driver should not try to switch to 1.8V when the SD 3.0 host
controller does not have any UHS capabilities bits set (SDR50, DDR50
or SDR104). See page 72 of "SD Specifications Part A2 SD Host
Controller Simplified Specification Version 3.00" under
"1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host
capabilities data structure for all V3.0 host controllers, only set them
if SDR104, SDR50 or DDR50 is set in the host capabilities register. This
will prevent the switch to 1.8V later.
Signed-off-by: Al Cooper <[email protected]>
Acked-by: Arindam Nath <[email protected]>
Acked-by: Philip Rakity <[email protected]>
Acked-by: Girish K S <[email protected]>
Signed-off-by: Chris Ball <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/mmc/host/sdhci.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 8262cad..9aa77f3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2782,8 +2782,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_card_is_removable(mmc))
mmc->caps |= MMC_CAP_NEEDS_POLL;
- /* UHS-I mode(s) supported by the host controller. */
- if (host->version >= SDHCI_SPEC_300)
+ /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
+ if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50))
mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
/* SDR104 supports also implies SDR50 support */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manoj Iyer <[email protected]>
commit 61c964ba1748e984cb232b431582815899bf10fe upstream.
Patch adds support for BCM20702A0 device id (0a5c:21f4).
usb-devices after patch was applied:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21f4 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=E4D53DF154D6
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
usb-devices before patch was applied:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21f4 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=E4D53DF154D6
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)
Signed-off-by: Manoj Iyer <[email protected]>
Tested-by: Chris Gagnon <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/btusb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index e272214..da6aa39 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -98,6 +98,7 @@ static struct usb_device_id btusb_table[] = {
{ USB_DEVICE(0x0a5c, 0x21e6) },
{ USB_DEVICE(0x0a5c, 0x21e8) },
{ USB_DEVICE(0x0a5c, 0x21f3) },
+ { USB_DEVICE(0x0a5c, 0x21f4) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gustavo Padovan <[email protected]>
commit 92c385f46b30f4954e9dd2d2005c12d233b479ea upstream.
Many Broadcom devices has a vendor specific devices class, with this rule
we match all existent and future controllers with this behavior.
We also remove old rules to that matches product id for Broadcom devices.
Tested-by: John Hommel <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/btusb.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2fe7776..e791b20 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -94,16 +94,14 @@ static struct usb_device_id btusb_table[] = {
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0489, 0xe042) },
- { USB_DEVICE(0x0a5c, 0x21e3) },
- { USB_DEVICE(0x0a5c, 0x21e6) },
- { USB_DEVICE(0x0a5c, 0x21e8) },
- { USB_DEVICE(0x0a5c, 0x21f3) },
- { USB_DEVICE(0x0a5c, 0x21f4) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
{ USB_DEVICE(0x0489, 0xe033) },
+ /*Broadcom devices with vendor specific id */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+
{ } /* Terminating entry */
};
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit e3ac104d41a97b42316915020ba228c505447d21 ]
The ESN replay window was already fully initialized in
xfrm_alloc_replay_state_esn(). No need to copy it again.
Cc: Steffen Klassert <[email protected]>
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 8f916a7..28e4f751 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -442,10 +442,11 @@ static void copy_from_user_state(struct xfrm_state *x, struct xfrm_usersa_info *
* somehow made shareable and move it to xfrm_state.c - JHS
*
*/
-static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs)
+static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
+ int update_esn)
{
struct nlattr *rp = attrs[XFRMA_REPLAY_VAL];
- struct nlattr *re = attrs[XFRMA_REPLAY_ESN_VAL];
+ struct nlattr *re = update_esn ? attrs[XFRMA_REPLAY_ESN_VAL] : NULL;
struct nlattr *lt = attrs[XFRMA_LTIME_VAL];
struct nlattr *et = attrs[XFRMA_ETIMER_THRESH];
struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH];
@@ -555,7 +556,7 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
goto error;
/* override default values from above */
- xfrm_update_ae_params(x, attrs);
+ xfrm_update_ae_params(x, attrs, 0);
return x;
@@ -1801,7 +1802,7 @@ static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh,
goto out;
spin_lock_bh(&x->lock);
- xfrm_update_ae_params(x, attrs);
+ xfrm_update_ae_params(x, attrs, 1);
spin_unlock_bh(&x->lock);
c.event = nlh->nlmsg_type;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Darren Hart <[email protected]>
commit 2588aba002d14e938c2f56d299ecf3e7ce1302a5 upstream.
pch_uart_interrupt() takes priv->port.lock which leads to two recursive
spinlock calls if low_latency==1 or CONFIG_PREEMPT_RT_FULL=y (one
otherwise):
pch_uart_interrupt
spin_lock_irqsave(priv->port.lock, flags)
case PCH_UART_IID_RDR_TO (data ready)
handle_rx_to
push_rx
tty_port_tty_get
spin_lock_irqsave(&port->lock, flags) <--- already hold this lock
...
tty_flip_buffer_push
...
flush_to_ldisc
spin_lock_irqsave(&tty->buf.lock)
spin_lock_irqsave(&tty->buf.lock)
disc->ops->receive_buf(tty, char_buf)
n_tty_receive_buf
tty->ops->flush_chars()
uart_flush_chars
uart_start
spin_lock_irqsave(&port->lock) <--- already hold this lock
Avoid this by using a dedicated lock to protect the eg20t_port structure
and IO access to its membase. This is more consistent with the 8250
driver. Ensure priv->lock is always take prior to priv->port.lock when
taken at the same time.
V2: Remove inadvertent whitespace change.
V3: Account for oops_in_progress for the private lock in
pch_console_write().
Note: Like the 8250 driver, if a printk is introduced anywhere inside
the pch_console_write() critical section, the kernel will hang
on a recursive spinlock on the private lock. The oops case is
handled by using a trylock in the oops_in_progress case.
Signed-off-by: Darren Hart <[email protected]>
CC: Tomoya MORINAGA <[email protected]>
CC: Feng Tang <[email protected]>
CC: Alexander Stein <[email protected]>
Acked-by: Alan Cox <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[bwh: Backported to 3.2:
- Adjust context
- Drop changes to pch_console_write()]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/tty/serial/pch_uart.c | 38 ++++++++++++++++++++++++++------------
1 file changed, 26 insertions(+), 12 deletions(-)
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -236,6 +236,9 @@ struct eg20t_port {
int tx_dma_use;
void *rx_buf_virt;
dma_addr_t rx_buf_dma;
+
+ /* protect the eg20t_port private structure and io access to membase */
+ spinlock_t lock;
};
/**
@@ -964,7 +967,7 @@ static irqreturn_t pch_uart_interrupt(in
unsigned int iid;
unsigned long flags;
- spin_lock_irqsave(&priv->port.lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
handled = 0;
while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
switch (iid) {
@@ -1017,7 +1020,7 @@ static irqreturn_t pch_uart_interrupt(in
priv->int_dis_flag = 0;
}
- spin_unlock_irqrestore(&priv->port.lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_RETVAL(handled);
}
@@ -1131,9 +1134,9 @@ static void pch_uart_break_ctl(struct ua
unsigned long flags;
priv = container_of(port, struct eg20t_port, port);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
pch_uart_hal_set_break(priv, ctl);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
/* Grab any interrupt resources and initialise any low level driver state. */
@@ -1284,7 +1287,8 @@ static void pch_uart_set_termios(struct
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
+ spin_lock(&port->lock);
uart_update_timeout(port, termios->c_cflag, baud);
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1297,7 +1301,8 @@ static void pch_uart_set_termios(struct
tty_termios_encode_baud_rate(termios, baud, baud);
out:
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static const char *pch_uart_type(struct uart_port *port)
@@ -1449,6 +1454,8 @@ static struct eg20t_port *pch_uart_init_
pci_enable_msi(pdev);
pci_set_master(pdev);
+ spin_lock_init(&priv->lock);
+
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinicius Costa Gomes <[email protected]>
commit cc110922da7e902b62d18641a370fec01a9fa794 upstream.
To make it clear that it may be called from contexts that may not have
any knowledge of L2CAP, we change the connection parameter, to receive
a hci_conn.
This also makes it clear that it is checking the security of the link.
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
include/net/bluetooth/smp.h | 2 +-
net/bluetooth/l2cap_core.c | 11 ++++++-----
net/bluetooth/l2cap_sock.c | 2 +-
net/bluetooth/smp.c | 4 ++--
4 files changed, 10 insertions(+), 9 deletions(-)
--- a/include/net/bluetooth/smp.h
+++ b/include/net/bluetooth/smp.h
@@ -131,7 +131,7 @@ struct smp_chan {
};
/* SMP Commands */
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);
int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -902,14 +902,15 @@ static void l2cap_chan_ready(struct sock
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
struct l2cap_chan *chan;
+ struct hci_conn *hcon = conn->hcon;
BT_DBG("conn %p", conn);
- if (!conn->hcon->out && conn->hcon->type == LE_LINK)
+ if (!hcon->out && hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
- if (conn->hcon->out && conn->hcon->type == LE_LINK)
- smp_conn_security(conn, conn->hcon->pending_sec_level);
+ if (hcon->out && hcon->type == LE_LINK)
+ smp_conn_security(hcon, hcon->pending_sec_level);
read_lock(&conn->chan_lock);
@@ -918,8 +919,8 @@ static void l2cap_conn_ready(struct l2ca
bh_lock_sock(sk);
- if (conn->hcon->type == LE_LINK) {
- if (smp_conn_security(conn, chan->sec_level))
+ if (hcon->type == LE_LINK) {
+ if (smp_conn_security(hcon, chan->sec_level))
l2cap_chan_ready(sk);
} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -616,7 +616,7 @@ static int l2cap_sock_setsockopt(struct
break;
}
- if (smp_conn_security(conn, sec.level))
+ if (smp_conn_security(conn->hcon, sec.level))
break;
err = 0;
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -554,9 +554,9 @@ static u8 smp_cmd_security_req(struct l2
return 0;
}
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level)
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
{
- struct hci_conn *hcon = conn->hcon;
+ struct l2cap_conn *conn = hcon->l2cap_data;
struct smp_chan *smp = conn->smp_chan;
BT_DBG("conn %p hcon %p level 0x%2.2x", conn, hcon, sec_level);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Weiping Pan <[email protected]>
commit 06b6a1cf6e776426766298d055bb3991957d90a7 upstream.
Jay Fenlason ([email protected]) found a bug,
that recvfrom() on an RDS socket can return the contents of random kernel
memory to userspace if it was called with a address length larger than
sizeof(struct sockaddr_in).
rds_recvmsg() also fails to set the addr_len paramater properly before
returning, but that's just a bug.
There are also a number of cases wher recvfrom() can return an entirely bogus
address. Anything in rds_recvmsg() that returns a non-negative value but does
not go through the "sin = (struct sockaddr_in *)msg->msg_name;" code path
at the end of the while(1) loop will return up to 128 bytes of kernel memory
to userspace.
And I write two test programs to reproduce this bug, you will see that in
rds_server, fromAddr will be overwritten and the following sock_fd will be
destroyed.
Yes, it is the programmer's fault to set msg_namelen incorrectly, but it is
better to make the kernel copy the real length of address to user space in
such case.
How to run the test programs ?
I test them on 32bit x86 system, 3.5.0-rc7.
1 compile
gcc -o rds_client rds_client.c
gcc -o rds_server rds_server.c
2 run ./rds_server on one console
3 run ./rds_client on another console
4 you will see something like:
server is waiting to receive data...
old socket fd=3
server received data from client:data from client
msg.msg_namelen=32
new socket fd=-1067277685
sendmsg()
: Bad file descriptor
/***************** rds_client.c ********************/
int main(void)
{
int sock_fd;
struct sockaddr_in serverAddr;
struct sockaddr_in toAddr;
char recvBuffer[128] = "data from client";
struct msghdr msg;
struct iovec iov;
sock_fd = socket(AF_RDS, SOCK_SEQPACKET, 0);
if (sock_fd < 0) {
perror("create socket error\n");
exit(1);
}
memset(&serverAddr, 0, sizeof(serverAddr));
serverAddr.sin_family = AF_INET;
serverAddr.sin_addr.s_addr = inet_addr("127.0.0.1");
serverAddr.sin_port = htons(4001);
if (bind(sock_fd, (struct sockaddr*)&serverAddr, sizeof(serverAddr)) < 0) {
perror("bind() error\n");
close(sock_fd);
exit(1);
}
memset(&toAddr, 0, sizeof(toAddr));
toAddr.sin_family = AF_INET;
toAddr.sin_addr.s_addr = inet_addr("127.0.0.1");
toAddr.sin_port = htons(4000);
msg.msg_name = &toAddr;
msg.msg_namelen = sizeof(toAddr);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
msg.msg_iov->iov_base = recvBuffer;
msg.msg_iov->iov_len = strlen(recvBuffer) + 1;
msg.msg_control = 0;
msg.msg_controllen = 0;
msg.msg_flags = 0;
if (sendmsg(sock_fd, &msg, 0) == -1) {
perror("sendto() error\n");
close(sock_fd);
exit(1);
}
printf("client send data:%s\n", recvBuffer);
memset(recvBuffer, '\0', 128);
msg.msg_name = &toAddr;
msg.msg_namelen = sizeof(toAddr);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
msg.msg_iov->iov_base = recvBuffer;
msg.msg_iov->iov_len = 128;
msg.msg_control = 0;
msg.msg_controllen = 0;
msg.msg_flags = 0;
if (recvmsg(sock_fd, &msg, 0) == -1) {
perror("recvmsg() error\n");
close(sock_fd);
exit(1);
}
printf("receive data from server:%s\n", recvBuffer);
close(sock_fd);
return 0;
}
/***************** rds_server.c ********************/
int main(void)
{
struct sockaddr_in fromAddr;
int sock_fd;
struct sockaddr_in serverAddr;
unsigned int addrLen;
char recvBuffer[128];
struct msghdr msg;
struct iovec iov;
sock_fd = socket(AF_RDS, SOCK_SEQPACKET, 0);
if(sock_fd < 0) {
perror("create socket error\n");
exit(0);
}
memset(&serverAddr, 0, sizeof(serverAddr));
serverAddr.sin_family = AF_INET;
serverAddr.sin_addr.s_addr = inet_addr("127.0.0.1");
serverAddr.sin_port = htons(4000);
if (bind(sock_fd, (struct sockaddr*)&serverAddr, sizeof(serverAddr)) < 0) {
perror("bind error\n");
close(sock_fd);
exit(1);
}
printf("server is waiting to receive data...\n");
msg.msg_name = &fromAddr;
/*
* I add 16 to sizeof(fromAddr), ie 32,
* and pay attention to the definition of fromAddr,
* recvmsg() will overwrite sock_fd,
* since kernel will copy 32 bytes to userspace.
*
* If you just use sizeof(fromAddr), it works fine.
* */
msg.msg_namelen = sizeof(fromAddr) + 16;
/* msg.msg_namelen = sizeof(fromAddr); */
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
msg.msg_iov->iov_base = recvBuffer;
msg.msg_iov->iov_len = 128;
msg.msg_control = 0;
msg.msg_controllen = 0;
msg.msg_flags = 0;
while (1) {
printf("old socket fd=%d\n", sock_fd);
if (recvmsg(sock_fd, &msg, 0) == -1) {
perror("recvmsg() error\n");
close(sock_fd);
exit(1);
}
printf("server received data from client:%s\n", recvBuffer);
printf("msg.msg_namelen=%d\n", msg.msg_namelen);
printf("new socket fd=%d\n", sock_fd);
strcat(recvBuffer, "--data from server");
if (sendmsg(sock_fd, &msg, 0) == -1) {
perror("sendmsg()\n");
close(sock_fd);
exit(1);
}
}
close(sock_fd);
return 0;
}
Signed-off-by: Weiping Pan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/rds/recv.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/rds/recv.c b/net/rds/recv.c
index 5c6e9f1..9f0f17c 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -410,6 +410,8 @@ int rds_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
rdsdebug("size %zu flags 0x%x timeo %ld\n", size, msg_flags, timeo);
+ msg->msg_namelen = 0;
+
if (msg_flags & MSG_OOB)
goto out;
@@ -485,6 +487,7 @@ int rds_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
sin->sin_port = inc->i_hdr.h_sport;
sin->sin_addr.s_addr = inc->i_saddr;
memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+ msg->msg_namelen = sizeof(*sin);
}
break;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinicius Costa Gomes <[email protected]>
commit d8343f125710fb596f7a88cd756679f14f4e77b9 upstream.
In the case that the link is already in the connected state and a
Pairing request arrives from the mgmt interface, hci_conn_security()
would be called but it was not considering LE links.
Reported-by: João Paulo Rechi Vita <[email protected]>
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/bluetooth/hci_conn.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -44,6 +44,7 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+#include <net/bluetooth/smp.h>
static void hci_le_connect(struct hci_conn *conn)
{
@@ -641,6 +642,9 @@ int hci_conn_security(struct hci_conn *c
{
BT_DBG("conn %p", conn);
+ if (conn->type == LE_LINK)
+ return smp_conn_security(conn, sec_level);
+
/* For sdp we don't need the link key. */
if (sec_level == BT_SECURITY_SDP)
return 1;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seth Forshee <[email protected]>
commit 32ab31e01e2def6f48294d872d9bb42573aae00f upstream.
The ACPI tables in the Macbook Air 5,1 define a single IOAPIC with id 2,
but the only remapping unit described in the DMAR table matches id 0.
Interrupt remapping fails as a result, and the kernel panics with the
message "timer doesn't work through Interrupt-remapped IO-APIC."
To fix this, check each IOAPIC for a corresponding IOMMU. If an IOMMU is
not found, do not allow IRQ remapping to be enabled.
v2: Move check to parse_ioapics_under_ir(), raise log level to KERN_ERR,
and add FW_BUG to the log message
v3: Skip check if IOMMU doesn't support interrupt remapping and remove
existing check that the IOMMU count equals the IOAPIC count
Acked-by: Suresh Siddha <[email protected]>
Signed-off-by: Seth Forshee <[email protected]>
Acked-by: Yinghai Lu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/iommu/intr_remapping.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
--- a/drivers/iommu/intr_remapping.c
+++ b/drivers/iommu/intr_remapping.c
@@ -752,6 +752,7 @@ int __init parse_ioapics_under_ir(void)
{
struct dmar_drhd_unit *drhd;
int ir_supported = 0;
+ int ioapic_idx;
for_each_drhd_unit(drhd) {
struct intel_iommu *iommu = drhd->iommu;
@@ -764,13 +765,20 @@ int __init parse_ioapics_under_ir(void)
}
}
- if (ir_supported && ir_ioapic_num != nr_ioapics) {
- printk(KERN_WARNING
- "Not all IO-APIC's listed under remapping hardware\n");
- return -1;
+ if (!ir_supported)
+ return 0;
+
+ for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
+ int ioapic_id = mpc_ioapic_id(ioapic_idx);
+ if (!map_ioapic_to_ir(ioapic_id)) {
+ pr_err(FW_BUG "ioapic %d has no mapping iommu, "
+ "interrupt remapping will be disabled\n",
+ ioapic_id);
+ return -1;
+ }
}
- return ir_supported;
+ return 1;
}
int __init ir_dev_scope_init(void)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Graf <[email protected]>
[ Upstream commit 4c3a5bdae293f75cdf729c6c00124e8489af2276 ]
SCTP charges wmem_alloc via sctp_set_owner_w() in sctp_sendmsg() and via
skb_set_owner_w() in sctp_packet_transmit(). If a sender runs out of
sndbuf it will sleep in sctp_wait_for_sndbuf() and expects to be waken up
by __sctp_write_space().
Buffer space charged via sctp_set_owner_w() is released in sctp_wfree()
which calls __sctp_write_space() directly.
Buffer space charged via skb_set_owner_w() is released via sock_wfree()
which calls sk->sk_write_space() _if_ SOCK_USE_WRITE_QUEUE is not set.
sctp_endpoint_init() sets SOCK_USE_WRITE_QUEUE on all sockets.
Therefore if sctp_packet_transmit() manages to queue up more than sndbuf
bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is
interrupted by a signal.
This could be fixed by clearing the SOCK_USE_WRITE_QUEUE flag but ...
Charging for the data twice does not make sense in the first place, it
leads to overcharging sndbuf by a factor 2. Therefore this patch only
charges a single byte in wmem_alloc when transmitting an SCTP packet to
ensure that the socket stays alive until the packet has been released.
This means that control chunks are no longer accounted for in wmem_alloc
which I believe is not a problem as skb->truesize will typically lead
to overcharging anyway and thus compensates for any control overhead.
Signed-off-by: Thomas Graf <[email protected]>
CC: Vlad Yasevich <[email protected]>
CC: Neil Horman <[email protected]>
CC: David Miller <[email protected]>
Acked-by: Vlad Yasevich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/sctp/output.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 8fc4dcd..32ba8d0 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -334,6 +334,25 @@ finish:
return retval;
}
+static void sctp_packet_release_owner(struct sk_buff *skb)
+{
+ sk_free(skb->sk);
+}
+
+static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = sctp_packet_release_owner;
+
+ /*
+ * The data chunks have already been accounted for in sctp_sendmsg(),
+ * therefore only reserve a single byte to keep socket around until
+ * the packet has been transmitted.
+ */
+ atomic_inc(&sk->sk_wmem_alloc);
+}
+
/* All packets are sent to the network through this function from
* sctp_outq_tail().
*
@@ -375,7 +394,7 @@ int sctp_packet_transmit(struct sctp_packet *packet)
/* Set the owning socket so that we know where to get the
* destination IP address.
*/
- skb_set_owner_w(nskb, sk);
+ sctp_packet_set_owner_w(nskb, sk);
if (!sctp_transport_dst_check(tp)) {
sctp_transport_route(tp, NULL, sctp_sk(sk));
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Srivatsa S. Bhat" <[email protected]>
commit d35be8bab9b0ce44bed4b9453f86ebf64062721e upstream.
In the event of CPU hotplug, the kernel modifies the cpusets' cpus_allowed
masks as and when necessary to ensure that the tasks belonging to the cpusets
have some place (online CPUs) to run on. And regular CPU hotplug is
destructive in the sense that the kernel doesn't remember the original cpuset
configurations set by the user, across hotplug operations.
However, suspend/resume (which uses CPU hotplug) is a special case in which
the kernel has the responsibility to restore the system (during resume), to
exactly the same state it was in before suspend.
In order to achieve that, do the following:
1. Don't modify cpusets during suspend/resume. At all.
In particular, don't move the tasks from one cpuset to another, and
don't modify any cpuset's cpus_allowed mask. So, simply ignore cpusets
during the CPU hotplug operations that are carried out in the
suspend/resume path.
2. However, cpusets and sched domains are related. We just want to avoid
altering cpusets alone. So, to keep the sched domains updated, build
a single sched domain (containing all active cpus) during each of the
CPU hotplug operations carried out in s/r path, effectively ignoring
the cpusets' cpus_allowed masks.
(Since userspace is frozen while doing all this, it will go unnoticed.)
3. During the last CPU online operation during resume, build the sched
domains by looking up the (unaltered) cpusets' cpus_allowed masks.
That will bring back the system to the same original state as it was in
before suspend.
Ultimately, this will not only solve the cpuset problem related to suspend
resume (ie., restores the cpusets to exactly what it was before suspend, by
not touching it at all) but also speeds up suspend/resume because we avoid
running cpuset update code for every CPU being offlined/onlined.
Signed-off-by: Srivatsa S. Bhat <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
[Preeti U Murthy: Please apply this patch to the stable tree 3.0.y]
Signed-off-by: Preeti U Murthy <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
kernel/cpuset.c | 3 +++
kernel/sched.c | 40 ++++++++++++++++++++++++++++++++++++----
2 files changed, 39 insertions(+), 4 deletions(-)
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2080,6 +2080,9 @@ static void scan_for_empty_cpusets(struc
* (of no affect) on systems that are actively using CPU hotplug
* but making no active use of cpusets.
*
+ * The only exception to this is suspend/resume, where we don't
+ * modify cpusets at all.
+ *
* This routine ensures that top_cpuset.cpus_allowed tracks
* cpu_active_mask on each CPU hotplug (cpuhp) event.
*
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -8192,34 +8192,66 @@ int __init sched_create_sysfs_power_savi
}
#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
+static int num_cpus_frozen; /* used to mark begin/end of suspend/resume */
+
/*
* Update cpusets according to cpu_active mask. If cpusets are
* disabled, cpuset_update_active_cpus() becomes a simple wrapper
* around partition_sched_domains().
+ *
+ * If we come here as part of a suspend/resume, don't touch cpusets because we
+ * want to restore it back to its original state upon resume anyway.
*/
static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
+ case CPU_ONLINE_FROZEN:
+ case CPU_DOWN_FAILED_FROZEN:
+
+ /*
+ * num_cpus_frozen tracks how many CPUs are involved in suspend
+ * resume sequence. As long as this is not the last online
+ * operation in the resume sequence, just build a single sched
+ * domain, ignoring cpusets.
+ */
+ num_cpus_frozen--;
+ if (likely(num_cpus_frozen)) {
+ partition_sched_domains(1, NULL, NULL);
+ break;
+ }
+
+ /*
+ * This is the last CPU online operation. So fall through and
+ * restore the original sched domains by considering the
+ * cpuset configurations.
+ */
+
case CPU_ONLINE:
case CPU_DOWN_FAILED:
cpuset_update_active_cpus();
- return NOTIFY_OK;
+ break;
default:
return NOTIFY_DONE;
}
+ return NOTIFY_OK;
}
static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
case CPU_DOWN_PREPARE:
cpuset_update_active_cpus();
- return NOTIFY_OK;
+ break;
+ case CPU_DOWN_PREPARE_FROZEN:
+ num_cpus_frozen++;
+ partition_sched_domains(1, NULL, NULL);
+ break;
default:
return NOTIFY_DONE;
}
+ return NOTIFY_OK;
}
static int update_runtime(struct notifier_block *nfb,
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
commit 2f1f4d9b60396d2df4cff829bd5376ffc8ed9a2c upstream.
This reverts commit 985f61f7ee647ad570c05eab0b74915da2ac8e19.
This commit fixed certain cases, but ended up regressing others
due to limitations in the current KMS API. A proper fix is too
invasive for 3.6. Push it back to 3.7.
Reported-by: Andres Freund <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
[bwh: Backported to 3.2: drop the DCE6 case]
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 163 +++++++-------------------------
1 file changed, 34 insertions(+), 129 deletions(-)
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1446,98 +1446,14 @@ static void radeon_legacy_atom_fixup(str
}
}
-/**
- * radeon_get_pll_use_mask - look up a mask of which pplls are in use
- *
- * @crtc: drm crtc
- *
- * Returns the mask of which PPLLs (Pixel PLLs) are in use.
- */
-static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_crtc *test_crtc;
- struct radeon_crtc *radeon_test_crtc;
- u32 pll_in_use = 0;
-
- list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
- if (crtc == test_crtc)
- continue;
-
- radeon_test_crtc = to_radeon_crtc(test_crtc);
- if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
- pll_in_use |= (1 << radeon_test_crtc->pll_id);
- }
- return pll_in_use;
-}
-
-/**
- * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
- *
- * @crtc: drm crtc
- *
- * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
- * also in DP mode. For DP, a single PPLL can be used for all DP
- * crtcs/encoders.
- */
-static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_encoder *test_encoder;
- struct radeon_crtc *radeon_test_crtc;
-
- list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
- if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
- if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
- /* for DP use the same PLL for all */
- radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
- if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
- return radeon_test_crtc->pll_id;
- }
- }
- }
- return ATOM_PPLL_INVALID;
-}
-
-/**
- * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
- *
- * @crtc: drm crtc
- *
- * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors
- * a single PPLL can be used for all DP crtcs/encoders. For non-DP
- * monitors a dedicated PPLL must be used. If a particular board has
- * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
- * as there is no need to program the PLL itself. If we are not able to
- * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
- * avoid messing up an existing monitor.
- *
- * Asic specific PLL information
- *
- * DCE 6.1
- * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
- * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
- *
- * DCE 6.0
- * - PPLL0 is available to all UNIPHY (DP only)
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- * DCE 5.0
- * - DCPLL is available to all UNIPHY (DP only)
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- * DCE 3.0/4.0/4.1
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- */
static int radeon_atom_pick_pll(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *test_encoder;
- u32 pll_in_use;
- int pll;
+ struct drm_crtc *test_crtc;
+ uint32_t pll_in_use = 0;
if (ASIC_IS_DCE4(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1545,7 +1461,7 @@ static int radeon_atom_pick_pll(struct d
/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
* depending on the asic:
* DCE4: PPLL or ext clock
- * DCE5: PPLL, DCPLL, or ext clock
+ * DCE5: DCPLL or ext clock
*
* Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
* PPLL/DCPLL programming and only program the DP DTO for the
@@ -1553,31 +1469,29 @@ static int radeon_atom_pick_pll(struct d
*/
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
if (rdev->clock.dp_extclk)
- /* skip PPLL programming if using ext clock */
return ATOM_PPLL_INVALID;
else if (ASIC_IS_DCE5(rdev))
- /* use DCPLL for all DP */
return ATOM_DCPLL;
- else {
- /* use the same PPLL for all DP monitors */
- pll = radeon_get_shared_dp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- }
}
- break;
}
}
- /* all other cases */
- pll_in_use = radeon_get_pll_use_mask(crtc);
- if (!(pll_in_use & (1 << ATOM_PPLL2)))
- return ATOM_PPLL2;
- if (!(pll_in_use & (1 << ATOM_PPLL1)))
+
+ /* otherwise, pick one of the plls */
+ list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+ struct radeon_crtc *radeon_test_crtc;
+
+ if (crtc == test_crtc)
+ continue;
+
+ radeon_test_crtc = to_radeon_crtc(test_crtc);
+ if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
+ (radeon_test_crtc->pll_id <= ATOM_PPLL2))
+ pll_in_use |= (1 << radeon_test_crtc->pll_id);
+ }
+ if (!(pll_in_use & 1))
return ATOM_PPLL1;
- DRM_ERROR("unable to allocate a PPLL\n");
- return ATOM_PPLL_INVALID;
+ return ATOM_PPLL2;
} else
- /* use PPLL1 or PPLL2 */
return radeon_crtc->crtc_id;
}
@@ -1696,7 +1610,7 @@ static void atombios_crtc_disable(struct
break;
}
done:
- radeon_crtc->pll_id = ATOM_PPLL_INVALID;
+ radeon_crtc->pll_id = -1;
}
static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1745,6 +1659,6 @@ void radeon_atombios_init_crtc(struct dr
else
radeon_crtc->crtc_offset = 0;
}
- radeon_crtc->pll_id = ATOM_PPLL_INVALID;
+ radeon_crtc->pll_id = -1;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Avi Kivity <[email protected]>
commit cb09cad44f07044d9810f18f6f9a6a6f3771f979 upstream.
Probably a leftover from the early days of self-patching, p6nops
are marked __initconst_or_module, which causes them to be
discarded in a non-modular kernel. If something later triggers
patching, it will overwrite kernel code with garbage.
Reported-by: Tomas Racek <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
Cc: Michael Tokarev <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: [email protected]
Cc: Anthony Liguori <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: Alan Cox <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
arch/x86/kernel/alternative.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index afb7ff7..ced4534 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
#endif
#ifdef P6_NOP1
-static const unsigned char __initconst_or_module p6nops[] =
+static const unsigned char p6nops[] =
{
P6_NOP1,
P6_NOP2,
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao feng <[email protected]>
[ Upstream commit 6825a26c2dc21eb4f8df9c06d3786ddec97cf53b ]
as we hold dst_entry before we call __ip6_del_rt,
so we should alse call dst_release not only return
-ENOENT when the rt6_info is ip6_null_entry.
and we already hold the dst entry, so I think it's
safe to call dst_release out of the write-read lock.
Signed-off-by: Gao feng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/ipv6/route.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 2e21751..488a1b7 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1435,17 +1435,18 @@ static int __ip6_del_rt(struct rt6_info *rt, struct nl_info *info)
struct fib6_table *table;
struct net *net = dev_net(rt->rt6i_dev);
- if (rt == net->ipv6.ip6_null_entry)
- return -ENOENT;
+ if (rt == net->ipv6.ip6_null_entry) {
+ err = -ENOENT;
+ goto out;
+ }
table = rt->rt6i_table;
write_lock_bh(&table->tb6_lock);
-
err = fib6_del(rt, info);
- dst_release(&rt->dst);
-
write_unlock_bh(&table->tb6_lock);
+out:
+ dst_release(&rt->dst);
return err;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit c0cc88a7627c333de50b07b7c60b1d49d9d2e6cc ]
While investigating l2tp bug, I hit a bug in eth_type_trans(),
because not enough bytes were pulled in skb head.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/l2tp/l2tp_eth.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 3c55f63..2cef50b 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -132,7 +132,7 @@ static void l2tp_eth_dev_recv(struct l2tp_session *session, struct sk_buff *skb,
printk("\n");
}
- if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
+ if (!pskb_may_pull(skb, ETH_HLEN))
goto error;
secpath_reset(skb);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Kosina <[email protected]>
commit b6787242f32700377d3da3b8d788ab3928bab849 upstream.
If kmemdup() in hidraw_report_event() fails, we are not propagating
this fact properly.
Let hidraw_report_event() and hid_report_raw_event() return an error
value to the caller.
Reported-by: Oliver Neukum <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hid-core.c | 16 +++++++++++-----
drivers/hid/hidraw.c | 19 +++++++++++++------
include/linux/hid.h | 2 +-
include/linux/hidraw.h | 4 ++--
4 files changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 8be458b..0cddcaa 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1032,7 +1032,7 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
return report;
}
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt)
{
struct hid_report_enum *report_enum = hid->report_enum + type;
@@ -1040,10 +1040,11 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
unsigned int a;
int rsize, csize = size;
u8 *cdata = data;
+ int ret = 0;
report = hid_get_report(report_enum, data);
if (!report)
- return;
+ goto out;
if (report_enum->numbered) {
cdata++;
@@ -1063,14 +1064,19 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_report_event)
hid->hiddev_report_event(hid, report);
- if (hid->claimed & HID_CLAIMED_HIDRAW)
- hidraw_report_event(hid, data, size);
+ if (hid->claimed & HID_CLAIMED_HIDRAW) {
+ ret = hidraw_report_event(hid, data, size);
+ if (ret)
+ goto out;
+ }
for (a = 0; a < report->maxfield; a++)
hid_input_field(hid, report->field[a], cdata, interrupt);
if (hid->claimed & HID_CLAIMED_INPUT)
hidinput_report_event(hid, report);
+out:
+ return ret;
}
EXPORT_SYMBOL_GPL(hid_report_raw_event);
@@ -1147,7 +1153,7 @@ nomem:
}
}
- hid_report_raw_event(hid, type, data, size, interrupt);
+ ret = hid_report_raw_event(hid, type, data, size, interrupt);
unlock:
up(&hid->driver_lock);
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index cf7d6d5..36fa77b 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -87,11 +87,13 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
len = list->buffer[list->tail].len > count ?
count : list->buffer[list->tail].len;
- if (copy_to_user(buffer, list->buffer[list->tail].value, len)) {
- ret = -EFAULT;
- goto out;
+ if (list->buffer[list->tail].value) {
+ if (copy_to_user(buffer, list->buffer[list->tail].value, len)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ ret = len;
}
- ret = len;
kfree(list->buffer[list->tail].value);
list->tail = (list->tail + 1) & (HIDRAW_BUFFER_SIZE - 1);
@@ -437,19 +439,24 @@ static const struct file_operations hidraw_ops = {
.llseek = noop_llseek,
};
-void hidraw_report_event(struct hid_device *hid, u8 *data, int len)
+int hidraw_report_event(struct hid_device *hid, u8 *data, int len)
{
struct hidraw *dev = hid->hidraw;
struct hidraw_list *list;
+ int ret = 0;
list_for_each_entry(list, &dev->list, node) {
- list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC);
+ if (!(list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC))) {
+ ret = -ENOMEM;
+ break;
+ }
list->buffer[list->head].len = len;
list->head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
kill_fasync(&list->fasync, SIGIO, POLL_IN);
}
wake_up_interruptible(&dev->wait);
+ return ret;
}
EXPORT_SYMBOL_GPL(hidraw_report_event);
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 3a95da6..58b3857 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -896,7 +896,7 @@ static inline int hid_hw_power(struct hid_device *hdev, int level)
return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0;
}
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt);
extern int hid_generic_init(void);
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 4b88e69..9cdc9b6 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -76,13 +76,13 @@ struct hidraw_list {
#ifdef CONFIG_HIDRAW
int hidraw_init(void);
void hidraw_exit(void);
-void hidraw_report_event(struct hid_device *, u8 *, int);
+int hidraw_report_event(struct hid_device *, u8 *, int);
int hidraw_connect(struct hid_device *);
void hidraw_disconnect(struct hid_device *);
#else
static inline int hidraw_init(void) { return 0; }
static inline void hidraw_exit(void) { }
-static inline void hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
+static inline int hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
static inline int hidraw_connect(struct hid_device *hid) { return -1; }
static inline void hidraw_disconnect(struct hid_device *hid) { }
#endif
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Klassert <[email protected]>
[ Upstream commit 3b59df46a449ec9975146d71318c4777ad086744 ]
ESN for esp is defined in RFC 4303. This RFC assumes that the
sequence number counters are always up to date. However,
this is not true if an async crypto algorithm is employed.
If the sequence number counters are not up to date on sequence
number check, we may incorrectly update the upper 32 bit of
the sequence number. This leads to a DOS.
We workaround this by comparing the upper sequence number,
(used for authentication) with the upper sequence number
computed after the async processing. We drop the packet
if these numbers are different.
To do this, we introduce a recheck function that does this
check in the ESN case.
Signed-off-by: Steffen Klassert <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
include/net/xfrm.h | 3 +++
net/xfrm/xfrm_input.c | 2 +-
net/xfrm/xfrm_replay.c | 15 +++++++++++++++
3 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index b203e14..921f627 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -269,6 +269,9 @@ struct xfrm_replay {
int (*check)(struct xfrm_state *x,
struct sk_buff *skb,
__be32 net_seq);
+ int (*recheck)(struct xfrm_state *x,
+ struct sk_buff *skb,
+ __be32 net_seq);
void (*notify)(struct xfrm_state *x, int event);
int (*overflow)(struct xfrm_state *x, struct sk_buff *skb);
};
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 54a0dc2..ab2bb42 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -212,7 +212,7 @@ resume:
/* only the first xfrm gets the encap type */
encap_type = 0;
- if (async && x->repl->check(x, skb, seq)) {
+ if (async && x->repl->recheck(x, skb, seq)) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
goto drop_unlock;
}
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 2f6d11d..3efb07d 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -420,6 +420,18 @@ err:
return -EINVAL;
}
+static int xfrm_replay_recheck_esn(struct xfrm_state *x,
+ struct sk_buff *skb, __be32 net_seq)
+{
+ if (unlikely(XFRM_SKB_CB(skb)->seq.input.hi !=
+ htonl(xfrm_replay_seqhi(x, net_seq)))) {
+ x->stats.replay_window++;
+ return -EINVAL;
+ }
+
+ return xfrm_replay_check_esn(x, skb, net_seq);
+}
+
static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
{
unsigned int bitnr, nr, i;
@@ -479,6 +491,7 @@ static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
static struct xfrm_replay xfrm_replay_legacy = {
.advance = xfrm_replay_advance,
.check = xfrm_replay_check,
+ .recheck = xfrm_replay_check,
.notify = xfrm_replay_notify,
.overflow = xfrm_replay_overflow,
};
@@ -486,6 +499,7 @@ static struct xfrm_replay xfrm_replay_legacy = {
static struct xfrm_replay xfrm_replay_bmp = {
.advance = xfrm_replay_advance_bmp,
.check = xfrm_replay_check_bmp,
+ .recheck = xfrm_replay_check_bmp,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_bmp,
};
@@ -493,6 +507,7 @@ static struct xfrm_replay xfrm_replay_bmp = {
static struct xfrm_replay xfrm_replay_esn = {
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
+ .recheck = xfrm_replay_recheck_esn,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_esn,
};
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ratan Nalumasu <[email protected]>
commit 4fe9f8e203fdad1524c04beb390f3c6099781ed9 upstream.
When a device is unplugged, wait for all processes that have opened the device
to close before deallocating the device.
Signed-off-by: Ratan Nalumasu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hidraw.c | 69 +++++++++++++++++++-------------------------------
1 file changed, 26 insertions(+), 43 deletions(-)
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 3b6f7bf..c46c5f1 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -42,6 +42,7 @@ static struct cdev hidraw_cdev;
static struct class *hidraw_class;
static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES];
static DEFINE_MUTEX(minors_lock);
+static void drop_ref(struct hidraw *hid, int exists_bit);
static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
@@ -113,7 +114,7 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
__u8 *buf;
int ret = 0;
- if (!hidraw_table[minor]) {
+ if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
ret = -ENODEV;
goto out;
}
@@ -261,7 +262,7 @@ static int hidraw_open(struct inode *inode, struct file *file)
}
mutex_lock(&minors_lock);
- if (!hidraw_table[minor]) {
+ if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
err = -ENODEV;
goto out_unlock;
}
@@ -298,36 +299,12 @@ out:
static int hidraw_release(struct inode * inode, struct file * file)
{
unsigned int minor = iminor(inode);
- struct hidraw *dev;
struct hidraw_list *list = file->private_data;
- int ret;
- int i;
-
- mutex_lock(&minors_lock);
- if (!hidraw_table[minor]) {
- ret = -ENODEV;
- goto unlock;
- }
+ drop_ref(hidraw_table[minor], 0);
list_del(&list->node);
- dev = hidraw_table[minor];
- if (!--dev->open) {
- if (list->hidraw->exist) {
- hid_hw_power(dev->hid, PM_HINT_NORMAL);
- hid_hw_close(dev->hid);
- } else {
- kfree(list->hidraw);
- }
- }
-
- for (i = 0; i < HIDRAW_BUFFER_SIZE; ++i)
- kfree(list->buffer[i].value);
kfree(list);
- ret = 0;
-unlock:
- mutex_unlock(&minors_lock);
-
- return ret;
+ return 0;
}
static long hidraw_ioctl(struct file *file, unsigned int cmd,
@@ -529,21 +506,7 @@ EXPORT_SYMBOL_GPL(hidraw_connect);
void hidraw_disconnect(struct hid_device *hid)
{
struct hidraw *hidraw = hid->hidraw;
-
- mutex_lock(&minors_lock);
- hidraw->exist = 0;
-
- device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
-
- hidraw_table[hidraw->minor] = NULL;
-
- if (hidraw->open) {
- hid_hw_close(hid);
- wake_up_interruptible(&hidraw->wait);
- } else {
- kfree(hidraw);
- }
- mutex_unlock(&minors_lock);
+ drop_ref(hidraw, 1);
}
EXPORT_SYMBOL_GPL(hidraw_disconnect);
@@ -585,3 +548,23 @@ void hidraw_exit(void)
unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES);
}
+
+static void drop_ref(struct hidraw *hidraw, int exists_bit)
+{
+ mutex_lock(&minors_lock);
+ if (exists_bit) {
+ hid_hw_close(hidraw->hid);
+ hidraw->exist = 0;
+ if (hidraw->open)
+ wake_up_interruptible(&hidraw->wait);
+ } else {
+ --hidraw->open;
+ }
+
+ if (!hidraw->open && !hidraw->exist) {
+ device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
+ hidraw_table[hidraw->minor] = NULL;
+ kfree(hidraw);
+ }
+ mutex_unlock(&minors_lock);
+}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Khoroshilov <[email protected]>
commit bcb4a75bde3821cecb17a71d287abfd6ef9bd68d upstream.
Several improvements in error handling:
- do not report success if alloc_chrdev_region() failed
- check for error code of cdev_add()
- use unregister_chrdev_region() instead of unregister_chrdev()
if class_create() failed
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/hid/hidraw.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 3b6f7bf..7c47fc3 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -559,21 +559,28 @@ int __init hidraw_init(void)
if (result < 0) {
pr_warn("can't get major number\n");
- result = 0;
goto out;
}
hidraw_class = class_create(THIS_MODULE, "hidraw");
if (IS_ERR(hidraw_class)) {
result = PTR_ERR(hidraw_class);
- unregister_chrdev(hidraw_major, "hidraw");
- goto out;
+ goto error_cdev;
}
cdev_init(&hidraw_cdev, &hidraw_ops);
- cdev_add(&hidraw_cdev, dev_id, HIDRAW_MAX_DEVICES);
+ result = cdev_add(&hidraw_cdev, dev_id, HIDRAW_MAX_DEVICES);
+ if (result < 0)
+ goto error_class;
+
out:
return result;
+
+error_class:
+ class_destroy(hidraw_class);
+error_cdev:
+ unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES);
+ goto out;
}
void hidraw_exit(void)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit ecd7918745234e423dd87fcc0c077da557909720 ]
The current code fails to ensure that the netlink message actually
contains as many bytes as the header indicates. If a user creates a new
state or updates an existing one but does not supply the bytes for the
whole ESN replay window, the kernel copies random heap bytes into the
replay bitmap, the ones happen to follow the XFRMA_REPLAY_ESN_VAL
netlink attribute. This leads to following issues:
1. The replay window has random bits set confusing the replay handling
code later on.
2. A malicious user could use this flaw to leak up to ~3.5kB of heap
memory when she has access to the XFRM netlink interface (requires
CAP_NET_ADMIN).
Known users of the ESN replay window are strongSwan and Steffen's
iproute2 patch (<http://patchwork.ozlabs.org/patch/85962/>). The latter
uses the interface with a bitmap supplied while the former does not.
strongSwan is therefore prone to run into issue 1.
To fix both issues without breaking existing userland allow using the
XFRMA_REPLAY_ESN_VAL netlink attribute with either an empty bitmap or a
fully specified one. For the former case we initialize the in-kernel
bitmap with zero, for the latter we copy the user supplied bitmap. For
state updates the full bitmap must be supplied.
To prevent overflows in the bitmap length calculation the maximum size
of bmp_len is limited to 128 by this patch -- resulting in a maximum
replay window of 4096 packets. This should be sufficient for all real
life scenarios (RFC 4303 recommends a default replay window size of 64).
Cc: Steffen Klassert <[email protected]>
Cc: Martin Willi <[email protected]>
Cc: Ben Hutchings <[email protected]>
Signed-off-by: Mathias Krause <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
include/linux/xfrm.h | 2 ++
net/xfrm/xfrm_user.c | 31 +++++++++++++++++++++++++------
2 files changed, 27 insertions(+), 6 deletions(-)
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 22e61fd..28e493b 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -84,6 +84,8 @@ struct xfrm_replay_state {
__u32 bitmap;
};
+#define XFRMA_REPLAY_ESN_MAX 4096
+
struct xfrm_replay_state_esn {
unsigned int bmp_len;
__u32 oseq;
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 28e4f751..ede01a8 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -123,9 +123,21 @@ static inline int verify_replay(struct xfrm_usersa_info *p,
struct nlattr **attrs)
{
struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL];
+ struct xfrm_replay_state_esn *rs;
- if ((p->flags & XFRM_STATE_ESN) && !rt)
- return -EINVAL;
+ if (p->flags & XFRM_STATE_ESN) {
+ if (!rt)
+ return -EINVAL;
+
+ rs = nla_data(rt);
+
+ if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8)
+ return -EINVAL;
+
+ if (nla_len(rt) < xfrm_replay_state_esn_len(rs) &&
+ nla_len(rt) != sizeof(*rs))
+ return -EINVAL;
+ }
if (!rt)
return 0;
@@ -370,14 +382,15 @@ static inline int xfrm_replay_verify_len(struct xfrm_replay_state_esn *replay_es
struct nlattr *rp)
{
struct xfrm_replay_state_esn *up;
+ int ulen;
if (!replay_esn || !rp)
return 0;
up = nla_data(rp);
+ ulen = xfrm_replay_state_esn_len(up);
- if (xfrm_replay_state_esn_len(replay_esn) !=
- xfrm_replay_state_esn_len(up))
+ if (nla_len(rp) < ulen || xfrm_replay_state_esn_len(replay_esn) != ulen)
return -EINVAL;
return 0;
@@ -388,22 +401,28 @@ static int xfrm_alloc_replay_state_esn(struct xfrm_replay_state_esn **replay_esn
struct nlattr *rta)
{
struct xfrm_replay_state_esn *p, *pp, *up;
+ int klen, ulen;
if (!rta)
return 0;
up = nla_data(rta);
+ klen = xfrm_replay_state_esn_len(up);
+ ulen = nla_len(rta) >= klen ? klen : sizeof(*up);
- p = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL);
+ p = kzalloc(klen, GFP_KERNEL);
if (!p)
return -ENOMEM;
- pp = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL);
+ pp = kzalloc(klen, GFP_KERNEL);
if (!pp) {
kfree(p);
return -ENOMEM;
}
+ memcpy(p, up, ulen);
+ memcpy(pp, up, ulen);
+
*replay_esn = p;
*preplay_esn = pp;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit 1f86840f897717f86d523a13e99a447e6a5d2fa5 ]
The memory used for the template copy is a local stack variable. As
struct xfrm_user_tmpl contains multiple holes added by the compiler for
alignment, not initializing the memory will lead to leaking stack bytes
to userland. Add an explicit memset(0) to avoid the info leak.
Initial version of the patch by Brad Spengler.
Cc: Brad Spengler <[email protected]>
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 1d222e9..8f916a7 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1405,6 +1405,7 @@ static int copy_to_user_tmpl(struct xfrm_policy *xp, struct sk_buff *skb)
struct xfrm_user_tmpl *up = &vec[i];
struct xfrm_tmpl *kp = &xp->xfrm_vec[i];
+ memset(up, 0, sizeof(*up));
memcpy(&up->id, &kp->id, sizeof(up->id));
up->family = kp->encap_family;
memcpy(&up->saddr, &kp->saddr, sizeof(up->saddr));
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit 4c87308bdea31a7b4828a51f6156e6f721a1fcc9 ]
copy_to_user_auth() fails to initialize the remainder of alg_name and
therefore discloses up to 54 bytes of heap memory via netlink to
userland.
Use strncpy() instead of strcpy() to fill the trailing bytes of alg_name
with null bytes.
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 1221b77..7f53c82 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -742,7 +742,7 @@ static int copy_to_user_auth(struct xfrm_algo_auth *auth, struct sk_buff *skb)
return -EMSGSIZE;
algo = nla_data(nla);
- strcpy(algo->alg_name, auth->alg_name);
+ strncpy(algo->alg_name, auth->alg_name, sizeof(algo->alg_name));
memcpy(algo->alg_key, auth->alg_key, (auth->alg_key_len + 7) / 8);
algo->alg_key_len = auth->alg_key_len;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit c25463722509fef0ed630b271576a8c9a70236f3 ]
When dump_one_policy() returns an error, e.g. because of a too small
buffer to dump the whole xfrm policy, xfrm_policy_netlink() returns
NULL instead of an error pointer. But its caller expects an error
pointer and therefore continues to operate on a NULL skbuff.
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index a092828..1221b77 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1531,6 +1531,7 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb,
{
struct xfrm_dump_info info;
struct sk_buff *skb;
+ int err;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
@@ -1541,9 +1542,10 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb,
info.nlmsg_seq = seq;
info.nlmsg_flags = 0;
- if (dump_one_policy(xp, dir, 0, &info) < 0) {
+ err = dump_one_policy(xp, dir, 0, &info);
+ if (err) {
kfree_skb(skb);
- return NULL;
+ return ERR_PTR(err);
}
return skb;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Giancarlo Formicuccia <[email protected]>
commit 6c4ae5c2e7bfbb7d10d73611f69ac8a8609d84fd upstream.
Add support for the AR3012 chip found on the Toshiba Sallite M840-1000-XQ.
usb-devices shows:
T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0930 ProdID=0219 Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Giancarlo Formicuccia <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index f0f6202..10308cd 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0930, 0x0219) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -102,6 +103,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index ff3eabc..83ebb24 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -140,6 +140,7 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Helgaas <[email protected]>
commit dfb117b3e50c52c7b3416db4a4569224b8db80bb upstream.
Check whether we evaluated _ADR successfully. Previously we ignored
failure, so we would have used garbage data from the stack as the device
and function number.
We return AE_OK so that we ignore only this slot and continue looking
for other slots.
Found by Coverity (CID 113981).
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/pci/hotplug/acpiphp_glue.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 806c44f..09bf377 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -132,6 +132,15 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status)) {
+ warn("can't evaluate _ADR (%#x)\n", status);
+ return AE_OK;
+ }
+
+ device = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+
pdev = pbus->self;
if (pdev && pci_is_pcie(pdev)) {
tmp = acpi_find_root_bridge_handle(pdev);
@@ -144,10 +153,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
}
}
- acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
- device = (adr >> 16) & 0xffff;
- function = adr & 0xffff;
-
newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL);
if (!newfunc)
return AE_NO_MEMORY;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li RongQing <[email protected]>
[ Upstream commit 433a19548061bb5457b6ab77ed7ea58ca6e43ddb ]
if xfrm_policy_get_afinfo returns 0, it has already released the read
lock, xfrm_policy_put_afinfo should not be called again.
Signed-off-by: Li RongQing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 0174034..113d20e 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1761,7 +1761,7 @@ static struct dst_entry *make_blackhole(struct net *net, u16 family,
if (!afinfo) {
dst_release(dst_orig);
- ret = ERR_PTR(-EINVAL);
+ return ERR_PTR(-EINVAL);
} else {
ret = afinfo->blackhole_route(net, dst_orig);
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathias Krause <[email protected]>
[ Upstream commit 7b789836f434c87168eab067cfbed1ec4783dffd ]
The memory reserved to dump the xfrm policy includes multiple padding
bytes added by the compiler for alignment (padding bytes in struct
xfrm_selector and struct xfrm_userpolicy_info). Add an explicit
memset(0) before filling the buffer to avoid the heap info leak.
Signed-off-by: Mathias Krause <[email protected]>
Acked-by: Steffen Klassert <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/xfrm/xfrm_user.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index f252cae..1d222e9 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1300,6 +1300,7 @@ static void copy_from_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy
static void copy_to_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy_info *p, int dir)
{
+ memset(p, 0, sizeof(*p));
memcpy(&p->sel, &xp->selector, sizeof(p->sel));
memcpy(&p->lft, &xp->lft, sizeof(p->lft));
memcpy(&p->curlft, &xp->curlft, sizeof(p->curlft));
No, please drop it from 3.2-stable.
This one should only go to 3.5/3.6 stable trees.
Otherwise it will break 3.2-stable.
Regards,
Fabio Estevam
________________________________________
From: Ben Hutchings [[email protected]]
Sent: Sunday, October 07, 2012 5:59 PM
To: [email protected]; [email protected]
Cc: [email protected]; [email protected]; Estevam Fabio-R49496; Arnd Bergmann; Sascha Hauer
Subject: [ 028/108] ARM: imx: armadillo5x0: Fix illegal register access
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fabio Estevam <[email protected]>
commit 35495173e1df621dff0e9a244accbe32cd28a98f upstream.
Since commit eb92044eb (ARM i.MX3: Make ccm base address a variable )
it is necessary to pass the CCM register base as a variable.
Fix the CCM register access in mach-armadillo5x0 by passing mx3_ccm_base and
avoid illegal accesses.
Also applies to v3.5
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Sascha Hauer <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
arch/arm/mach-imx/mach-armadillo5x0.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 2c6ab32..5985ed1 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void)
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
/* set NAND page size to 2k if not configured via boot mode pins */
- __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+ __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
+ (1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
/* RTC */
/* Get RTC IRQ and register the chip */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ed Cashin <[email protected]>
[ Upstream commit 8babe8cc6570ed896b7b596337eb8fe730c3ff45 ]
In order for the network layer to see that AoE requires
no checksumming in a generic way, the packets must be
marked as requiring no checksum, so we make this requirement
explicit with the assertion.
Signed-off-by: Ed Cashin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/block/aoe/aoecmd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index de0435e..887f68f 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -35,6 +35,7 @@ new_skb(ulong len)
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb->protocol = __constant_htons(ETH_P_AOE);
+ skb_checksum_none_assert(skb);
}
return skb;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Valente <[email protected]>
[ Upstream commit 71261956973ba9e0637848a5adb4a5819b4bae83 ]
If the old timestamps of a class, say cl, are stale when the class
becomes active, then QFQ may assign to cl a much higher start time
than the maximum value allowed. This may happen when QFQ assigns to
the start time of cl the finish time of a group whose classes are
characterized by a higher value of the ratio
max_class_pkt/weight_of_the_class with respect to that of
cl. Inserting a class with a too high start time into the bucket list
corrupts the data structure and may eventually lead to crashes.
This patch limits the maximum start time assigned to a class.
Signed-off-by: Paolo Valente <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/sched/sch_qfq.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
index 7b03254..ca0fb48 100644
--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -829,7 +829,10 @@ static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl)
if (mask) {
struct qfq_group *next = qfq_ffs(q, mask);
if (qfq_gt(roundedF, next->F)) {
- cl->S = next->F;
+ if (qfq_gt(limit, next->F))
+ cl->S = next->F;
+ else /* preserve timestamp correctness */
+ cl->S = limit;
return;
}
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jianguo Wu <[email protected]>
commit 05cf96398e1b6502f9e191291b715c7463c9d5dd upstream.
I found following definition in include/linux/memory.h, in my IA64
platform, SECTION_SIZE_BITS is equal to 32, and MIN_MEMORY_BLOCK_SIZE
will be 0.
#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS)
Because MIN_MEMORY_BLOCK_SIZE is int type and length of 32bits,
so MIN_MEMORY_BLOCK_SIZE(1 << 32) will will equal to 0.
Actually when SECTION_SIZE_BITS >= 31, MIN_MEMORY_BLOCK_SIZE will be wrong.
This will cause wrong system memory infomation in sysfs.
I think it should be:
#define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS)
And "echo offline > memory0/state" will cause following call trace:
kernel BUG at mm/memory_hotplug.c:885!
sh[6455]: bugcheck! 0 [1]
Pid: 6455, CPU 0, comm: sh
psr : 0000101008526030 ifs : 8000000000000fa4 ip : [<a0000001008c40f0>] Not tainted (3.6.0-rc1)
ip is at offline_pages+0x210/0xee0
Call Trace:
show_stack+0x80/0xa0
show_regs+0x640/0x920
die+0x190/0x2c0
die_if_kernel+0x50/0x80
ia64_bad_break+0x3d0/0x6e0
ia64_native_leave_kernel+0x0/0x270
offline_pages+0x210/0xee0
alloc_pages_current+0x180/0x2a0
Signed-off-by: Jianguo Wu <[email protected]>
Signed-off-by: Jiang Liu <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Reviewed-by: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
include/linux/memory.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 1ac7f6e..ff9a9f8 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -19,7 +19,7 @@
#include <linux/compiler.h>
#include <linux/mutex.h>
-#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS)
+#define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS)
struct memory_block {
unsigned long start_section_nr;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Haifeng <[email protected]>
commit 0ba8f2d59304dfe69b59c034de723ad80f7ab9ac upstream.
The heuristic method for buddy has been introduced since commit
43506fad21ca ("mm/page_alloc.c: simplify calculation of combined index
of adjacent buddy lists"). But the page address of higher page's buddy
was wrongly calculated, which will lead page_is_buddy to fail for ever.
IOW, the heuristic method would be disabled with the wrong page address
of higher page's buddy.
Calculating the page address of higher page's buddy should be based
higher_page with the offset between index of higher page and index of
higher page's buddy.
Signed-off-by: Haifeng Li <[email protected]>
Signed-off-by: Gavin Shan <[email protected]>
Reviewed-by: Michal Hocko <[email protected]>
Cc: KyongHo Cho <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Johannes Weiner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
mm/page_alloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index c66fb87..c13ea75 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -584,7 +584,7 @@ static inline void __free_one_page(struct page *page,
combined_idx = buddy_idx & page_idx;
higher_page = page + (combined_idx - page_idx);
buddy_idx = __find_buddy_index(combined_idx, order + 1);
- higher_buddy = page + (buddy_idx - combined_idx);
+ higher_buddy = higher_page + (buddy_idx - combined_idx);
if (page_is_buddy(higher_page, higher_buddy, order + 1)) {
list_add_tail(&page->lru,
&zone->free_area[order].free_list[migratetype]);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: htbegin <[email protected]>
[ Upstream commit ffb5ba90017505a19e238e986e6d33f09e4df765 ]
chan->count is used by rx channel. If the desc count is not updated by
the clean up loop in cpdma_chan_stop, the value written to the rxfree
register in cpdma_chan_start will be incorrect.
Signed-off-by: Tao Hou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/ethernet/ti/davinci_cpdma.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index c97d2f5..bfc3b0d 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -851,6 +851,7 @@ int cpdma_chan_stop(struct cpdma_chan *chan)
next_dma = desc_read(desc, hw_next);
chan->head = desc_from_phys(pool, next_dma);
+ chan->count--;
chan->stats.teardown_dequeue++;
/* issue callback without locks held */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut <[email protected]>
commit 6eda541d12116b4772baa09d3e8d7b0389df4289 upstream.
Acer used this chip connected via USB:
Bus 005 Device 005: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0cf3 Atheros Communications, Inc.
idProduct 0x3005 AR3011 Bluetooth
bcdDevice 0.01
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Signed-off-by: Marek Vasut <[email protected]>
Cc: Gustavo Padovan <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/ath3k.c | 1 +
drivers/bluetooth/btusb.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index ad591bd..f0f6202 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -63,6 +63,7 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index c9463af8..ff3eabc 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -125,6 +125,7 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
[ Upstream commit 0b836ddde177bdd5790ade83772860940bd481ea ]
Commit 36a1211970193ce215de50ed1e4e1272bc814df1 (netprio_cgroup.h:
dont include module.h from other includes) made the following build
error on ixp4xx_hss pop up:
CC [M] drivers/net/wan/ixp4xx_hss.o
drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')'
before string constant
drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')'
before string constant
drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')'
before string constant
drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')'
before string constant
make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1
This was previously hidden because ixp4xx_hss includes linux/hdlc.h which
includes linux/netdevice.h which includes linux/netprio_cgroup.h which
used to include linux/module.h. The real issue was actually present since
the initial commit that added this driver since it uses macros from
linux/module.h without including this file.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/wan/ixp4xx_hss.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index aaaca9a..3f575af 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/cdev.h>
#include <linux/dma-mapping.h>
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit e4d1aa40e363ed3e0486aeeeb0d173f7f822737e ]
Add a check if pdev->bus->self == NULL (root bus). When attaching
a netxen NIC to a VM it can be on the root bus and the guest would
crash in netxen_mask_aer_correctable() because of a NULL pointer
dereference if CONFIG_PCIEAER is present.
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 8cf3173..da5204d 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1351,6 +1351,10 @@ static void netxen_mask_aer_correctable(struct netxen_adapter *adapter)
struct pci_dev *root = pdev->bus->self;
u32 aer_pos;
+ /* root bus? */
+ if (!root)
+ return;
+
if (adapter->ahw.board_type != NETXEN_BRDTYPE_P3_4_GB_MM &&
adapter->ahw.board_type != NETXEN_BRDTYPE_P3_10G_TP)
return;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
commit ed48ece27cd3d5ee0354c32bbaec0f3e1d4715c3 upstream.
The existing work_on_cpu() implementation is hugely inefficient. It
creates a new kthread, execute that single function and then let the
kthread die on each invocation.
Now that system_wq can handle concurrent executions, there's no
advantage of doing this. Reimplement work_on_cpu() using system_wq
which makes it simpler and way more efficient.
stable: While this isn't a fix in itself, it's needed to fix a
workqueue related bug in cpufreq/powernow-k8. AFAICS, this
shouldn't break other existing users.
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Jiri Kosina <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
kernel/workqueue.c | 25 ++++++++-----------------
1 file changed, 8 insertions(+), 17 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index b80065a..3c5a79e 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3576,18 +3576,17 @@ static int __devinit workqueue_cpu_down_callback(struct notifier_block *nfb,
#ifdef CONFIG_SMP
struct work_for_cpu {
- struct completion completion;
+ struct work_struct work;
long (*fn)(void *);
void *arg;
long ret;
};
-static int do_work_for_cpu(void *_wfc)
+static void work_for_cpu_fn(struct work_struct *work)
{
- struct work_for_cpu *wfc = _wfc;
+ struct work_for_cpu *wfc = container_of(work, struct work_for_cpu, work);
+
wfc->ret = wfc->fn(wfc->arg);
- complete(&wfc->completion);
- return 0;
}
/**
@@ -3602,19 +3601,11 @@ static int do_work_for_cpu(void *_wfc)
*/
long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
{
- struct task_struct *sub_thread;
- struct work_for_cpu wfc = {
- .completion = COMPLETION_INITIALIZER_ONSTACK(wfc.completion),
- .fn = fn,
- .arg = arg,
- };
+ struct work_for_cpu wfc = { .fn = fn, .arg = arg };
- sub_thread = kthread_create(do_work_for_cpu, &wfc, "work_for_cpu");
- if (IS_ERR(sub_thread))
- return PTR_ERR(sub_thread);
- kthread_bind(sub_thread, cpu);
- wake_up_process(sub_thread);
- wait_for_completion(&wfc.completion);
+ INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn);
+ schedule_work_on(cpu, &wfc.work);
+ flush_work(&wfc.work);
return wfc.ret;
}
EXPORT_SYMBOL_GPL(work_on_cpu);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miklos Szeredi <[email protected]>
commit b161dfa6937ae46d50adce8a7c6b12233e96e7bd upstream.
IBM reported a soft lockup after applying the fix for the rename_lock
deadlock. Commit c83ce989cb5f ("VFS: Fix the nfs sillyrename regression
in kernel 2.6.38") was found to be the culprit.
The nfs sillyrename fix used DCACHE_DISCONNECTED to indicate that the
dentry was killed. This flag can be set on non-killed dentries too,
which results in infinite retries when trying to traverse the dentry
tree.
This patch introduces a separate flag: DCACHE_DENTRY_KILLED, which is
only set in d_kill() and makes try_to_ascend() test only this flag.
IBM reported successful test results with this patch.
Signed-off-by: Miklos Szeredi <[email protected]>
Cc: Trond Myklebust <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
fs/dcache.c | 4 ++--
include/linux/dcache.h | 2 ++
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/dcache.c b/fs/dcache.c
index 8086636..16521a9 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -389,7 +389,7 @@ static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent)
* Inform try_to_ascend() that we are no longer attached to the
* dentry tree
*/
- dentry->d_flags |= DCACHE_DISCONNECTED;
+ dentry->d_flags |= DCACHE_DENTRY_KILLED;
if (parent)
spin_unlock(&parent->d_lock);
dentry_iput(dentry);
@@ -1048,7 +1048,7 @@ static struct dentry *try_to_ascend(struct dentry *old, int locked, unsigned seq
* or deletion
*/
if (new != old->d_parent ||
- (old->d_flags & DCACHE_DISCONNECTED) ||
+ (old->d_flags & DCACHE_DENTRY_KILLED) ||
(!locked && read_seqretry(&rename_lock, seq))) {
spin_unlock(&new->d_lock);
new = NULL;
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index caa34e5..5920079 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -206,6 +206,8 @@ struct dentry_operations {
#define DCACHE_MANAGED_DENTRY \
(DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT)
+#define DCACHE_DENTRY_KILLED 0x100000
+
extern seqlock_t rename_lock;
static inline int dname_external(struct dentry *dentry)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Clements <[email protected]>
commit fded4e090c60100d709318896c79816d68d5b47d upstream.
Fix a serious but uncommon bug in nbd which occurs when there is heavy
I/O going to the nbd device while, at the same time, a failure (server,
network) or manual disconnect of the nbd connection occurs.
There is a small window between the time that the nbd_thread is stopped
and the socket is shutdown where requests can continue to be queued to
nbd's internal waiting_queue. When this happens, those requests are
never completed or freed.
The fix is to clear the waiting_queue on shutdown of the nbd device, in
the same way that the nbd request queue (queue_head) is already being
cleared.
Signed-off-by: Paul Clements <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[bwh: Backported to 3.2: local nbd_device pointers are called 'lo' not 'nbd']
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/block/nbd.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -445,6 +445,14 @@ static void nbd_clear_que(struct nbd_dev
req->errors++;
nbd_end_request(req);
}
+
+ while (!list_empty(&lo->waiting_queue)) {
+ req = list_entry(lo->waiting_queue.next, struct request,
+ queuelist);
+ list_del_init(&req->queuelist);
+ req->errors++;
+ nbd_end_request(req);
+ }
}
@@ -594,6 +602,7 @@ static int __nbd_ioctl(struct block_devi
lo->file = NULL;
nbd_clear_que(lo);
BUG_ON(!list_empty(&lo->queue_head));
+ BUG_ON(!list_empty(&lo->waiting_queue));
if (file)
fput(file);
return 0;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yevgeniy Melnichuk <[email protected]>
commit bc21fde2d549d1cb1ebef04016eb7affa43bb5c1 upstream.
Add Sony Vaio T-Series Bluetooth Module( 0x489:0xE036) to
the blacklist of btusb module and add it to the ath3k module.
output of cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e036 Rev= 0.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Yevgeniy Melnichuk <[email protected]>
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 11f36e5..fc2de55 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -86,6 +86,7 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C) },
+ { USB_DEVICE(0x0489, 0xE036) },
{ } /* Terminating entry */
};
@@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index cef3bac..2fe7776 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -141,6 +141,7 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 3e10986d1d698140747fcfc2761ec9cb64c1d582 ]
Its possible to use RAW sockets to get a crash in
tcp_set_keepalive() / sk_reset_timer()
Fix is to make sure socket is a SOCK_STREAM one.
Reported-by: Dave Jones <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/core/sock.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/core/sock.c b/net/core/sock.c
index 018fd41..1e8a882 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -593,7 +593,8 @@ set_rcvbuf:
case SO_KEEPALIVE:
#ifdef CONFIG_INET
- if (sk->sk_protocol == IPPROTO_TCP)
+ if (sk->sk_protocol == IPPROTO_TCP &&
+ sk->sk_type == SOCK_STREAM)
tcp_set_keepalive(sk, valbool);
#endif
sock_valbool_flag(sk, SOCK_KEEPOPEN, valbool);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiaodong Xu <[email protected]>
[ Upstream commit 2b018d57ff18e5405823e5cb59651a5b4d946d7b ]
When PPPOE is running over a virtual ethernet interface (e.g., a
bonding interface) and the user tries to delete the interface in case
the PPPOE state is ZOMBIE, the kernel will loop forever while
unregistering net_device for the reference count is not decreased to
zero which should have been done with dev_put().
Signed-off-by: Xiaodong Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/ppp/pppoe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index bc9a4bb..1161584 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -576,7 +576,7 @@ static int pppoe_release(struct socket *sock)
po = pppox_sk(sk);
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
dev_put(po->pppoe_dev);
po->pppoe_dev = NULL;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lennart Sorensen <[email protected]>
[ Upstream commit 2120c52da6fe741454a60644018ad2a6abd957ac ]
I discovered I couldn't get sierra_net to work on a powerpc. Turns out
the firmware attribute check assumes the system is little endian and
hence fails because the attributes is a 16 bit value.
Signed-off-by: Len Sorensen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/usb/sierra_net.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 864448b..e773250 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -678,7 +678,7 @@ static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap)
return -EIO;
}
- *datap = *attrdata;
+ *datap = le16_to_cpu(*attrdata);
kfree(attrdata);
return result;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dylan Reid <[email protected]>
commit 57b2d68863f281737d8596cb3d76d89d9cc54fd8 upstream.
The pause and resume operations indicate that the stream can be
un-paused/resumed from the exact location they were paused/suspended.
This is not true for this driver, the pause and suspend triggers share
the same code path with stop, they flush all pending DMA transfers.
This drops all pending samples. The pause_release/resume triggers are
the same as start, except that prepare won't be called beforehand,
nothing will be enqueued to the DMA engine and nothing will happen (no
audio). Removing the pause flag will let apps know that it isn't
supported. Removing the resume flag will cause user space to call
prepare and start instead of resume, so audio will continue playing when
the system wakes up.
Before removing the pause and resume flags, I tested this on an exynos
5250, using 'aplay -i'. Pause/un-pause leads to silence followed by a
write error. Suspend/resume testing led to the same result. Removing
the two flags fixes suspend/resume (since snd_pcm_prepare is called
again). And leads to a proper reporting of pause not supported.
Signed-off-by: Dylan Reid <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
sound/soc/samsung/dma.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index f3ebc38..b70964e 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -34,9 +34,7 @@ static const struct snd_pcm_hardware dma_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_U16_LE |
SNDRV_PCM_FMTBIT_U8 |
@@ -248,15 +246,11 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
prtd->params->ops->stop(prtd->params->ch);
break;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 96af69ea2a83d292238bdba20e4508ee967cf8cb ]
mip6_mh_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.
Use skb_header_pointer() instead of pskb_may_pull()
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/ipv6/mip6.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 43242e6..42853c4 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -84,28 +84,30 @@ static int mip6_mh_len(int type)
static int mip6_mh_filter(struct sock *sk, struct sk_buff *skb)
{
- struct ip6_mh *mh;
+ struct ip6_mh _hdr;
+ const struct ip6_mh *mh;
- if (!pskb_may_pull(skb, (skb_transport_offset(skb)) + 8) ||
- !pskb_may_pull(skb, (skb_transport_offset(skb) +
- ((skb_transport_header(skb)[1] + 1) << 3))))
+ mh = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_hdr), &_hdr);
+ if (!mh)
return -1;
- mh = (struct ip6_mh *)skb_transport_header(skb);
+ if (((mh->ip6mh_hdrlen + 1) << 3) > skb->len)
+ return -1;
if (mh->ip6mh_hdrlen < mip6_mh_len(mh->ip6mh_type)) {
LIMIT_NETDEBUG(KERN_DEBUG "mip6: MH message too short: %d vs >=%d\n",
mh->ip6mh_hdrlen, mip6_mh_len(mh->ip6mh_type));
- mip6_param_prob(skb, 0, ((&mh->ip6mh_hdrlen) -
- skb_network_header(skb)));
+ mip6_param_prob(skb, 0, offsetof(struct ip6_mh, ip6mh_hdrlen) +
+ skb_network_header_len(skb));
return -1;
}
if (mh->ip6mh_proto != IPPROTO_NONE) {
LIMIT_NETDEBUG(KERN_DEBUG "mip6: MH invalid payload proto = %d\n",
mh->ip6mh_proto);
- mip6_param_prob(skb, 0, ((&mh->ip6mh_proto) -
- skb_network_header(skb)));
+ mip6_param_prob(skb, 0, offsetof(struct ip6_mh, ip6mh_proto) +
+ skb_network_header_len(skb));
return -1;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit ab43ed8b7490cb387782423ecf74aeee7237e591 ]
icmp_filter() should not modify its input, or else its caller
would need to recompute ip_hdr() if skb->head is reallocated.
Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/ipv4/raw.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 007e2eb..e1d4f30 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -131,18 +131,20 @@ found:
* 0 - deliver
* 1 - block
*/
-static __inline__ int icmp_filter(struct sock *sk, struct sk_buff *skb)
+static int icmp_filter(const struct sock *sk, const struct sk_buff *skb)
{
- int type;
+ struct icmphdr _hdr;
+ const struct icmphdr *hdr;
- if (!pskb_may_pull(skb, sizeof(struct icmphdr)))
+ hdr = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_hdr), &_hdr);
+ if (!hdr)
return 1;
- type = icmp_hdr(skb)->type;
- if (type < 32) {
+ if (hdr->type < 32) {
__u32 data = raw_sk(sk)->filter.data;
- return ((1 << type) & data) != 0;
+ return ((1U << hdr->type) & data) != 0;
}
/* Do not block unknown ICMP types */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peng Chen <[email protected]>
commit 2096ae6ca647302d50a68aa36cb66a00e7dfac70 upstream.
Add support for the AR3012 chip found on Fioxconn.
usb-devices shows:
T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0489 ProdID=e057 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Peng Chen <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 10308cd..11f36e5 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -79,6 +79,7 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0930, 0x0219) },
+ { USB_DEVICE(0x0489, 0xe057) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -104,6 +105,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index da6aa39..cef3bac 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 1b05c4b50edbddbdde715c4a7350629819f6655e ]
icmpv6_filter() should not modify its input, or else its caller
would need to recompute ipv6_hdr() if skb->head is reallocated.
Use skb_header_pointer() instead of pskb_may_pull() and
change the prototype to make clear both sk and skb are const.
Also, if icmpv6 header cannot be found, do not deliver the packet,
as we do in IPv4.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/ipv6/raw.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 361ebf3..6e6c2c4 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -107,21 +107,20 @@ found:
* 0 - deliver
* 1 - block
*/
-static __inline__ int icmpv6_filter(struct sock *sk, struct sk_buff *skb)
+static int icmpv6_filter(const struct sock *sk, const struct sk_buff *skb)
{
- struct icmp6hdr *icmph;
- struct raw6_sock *rp = raw6_sk(sk);
-
- if (pskb_may_pull(skb, sizeof(struct icmp6hdr))) {
- __u32 *data = &rp->filter.data[0];
- int bit_nr;
+ struct icmp6hdr *_hdr;
+ const struct icmp6hdr *hdr;
- icmph = (struct icmp6hdr *) skb->data;
- bit_nr = icmph->icmp6_type;
+ hdr = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_hdr), &_hdr);
+ if (hdr) {
+ const __u32 *data = &raw6_sk(sk)->filter.data[0];
+ unsigned int type = hdr->icmp6_type;
- return (data[bit_nr >> 5] & (1 << (bit_nr & 31))) != 0;
+ return (data[type >> 5] & (1U << (type & 31))) != 0;
}
- return 0;
+ return 1;
}
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kevin Hilman <[email protected]>
commit 8dcebaa9a0ae8a0487f4342f3d56d2cb1c980860 upstream.
On some platforms, bootloaders are known to do some interesting RTC
programming. Without going into the obscurities as to why this may be
the case, suffice it to say the the driver should not make any
assumptions about the state of the RTC when the driver loads. In
particular, the driver probe should be sure that all interrupts are
disabled until otherwise programmed.
This was discovered when finding bursty I2C traffic every second on
Overo platforms. This I2C overhead was keeping the SoC from hitting
deep power states. The cause was found to be the RTC firing every
second on the I2C-connected TWL PMIC.
Special thanks to Felipe Balbi for suggesting to look for a rogue driver
as the source of the I2C traffic rather than the I2C driver itself.
Special thanks to Steve Sakoman for helping track down the source of the
continuous RTC interrups on the Overo boards.
Signed-off-by: Kevin Hilman <[email protected]>
Cc: Felipe Balbi <[email protected]>
Tested-by: Steve Sakoman <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Tested-by: Shubhrajyoti Datta <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/rtc/rtc-twl.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -462,6 +462,11 @@ static int __devinit twl_rtc_probe(struc
goto out1;
}
+ /* ensure interrupts are disabled, bootloaders can be strange */
+ ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "unable to disable interrupt\n");
+
/* init cached IRQ enable bits */
ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Stephen M. Cameron" <[email protected]>
commit 2453f5f992717251cfadab6184fbb3ec2f2e8b40 upstream.
If a command completes with a status of CMD_PROTOCOL_ERR, this
information should be conveyed to the SCSI mid layer, not dropped
on the floor. Unlike a similar bug in the hpsa driver, this bug
only affects tape drives and CD and DVD ROM drives in the cciss
driver, and to induce it, you have to disconnect (or damage) a
cable, so it is not a very likely scenario (which would explain
why the bug has gone undetected for the last 10 years.)
Signed-off-by: Stephen M. Cameron <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/block/cciss_scsi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 38aa6dd..da33111 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -795,6 +795,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
}
break;
case CMD_PROTOCOL_ERR:
+ cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev,
"%p has protocol error\n", c);
break;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: qiuxishi <[email protected]>
commit f14851af0ebb32745c6c5a2e400aa0549f9d20df upstream.
There may be a bug when registering section info. For example, on my
Itanium platform, the pfn range of node0 includes the other nodes, so
other nodes' section info will be double registered, and memmap's page
count will equal to 3.
node0: start_pfn=0x100, spanned_pfn=0x20fb00, present_pfn=0x7f8a3, => 0x000100-0x20fc00
node1: start_pfn=0x80000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x080000-0x100000
node2: start_pfn=0x100000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x100000-0x180000
node3: start_pfn=0x180000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x180000-0x200000
free_all_bootmem_node()
register_page_bootmem_info_node()
register_page_bootmem_info_section()
When hot remove memory, we can't free the memmap's page because
page_count() is 2 after put_page_bootmem().
sparse_remove_one_section()
free_section_usemap()
free_map_bootmem()
put_page_bootmem()
[[email protected]: add code comment]
Signed-off-by: Xishi Qiu <[email protected]>
Signed-off-by: Jiang Liu <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: "Luck, Tony" <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
mm/memory_hotplug.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 3ad25f9..6a5b90d 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -126,9 +126,6 @@ static void register_page_bootmem_info_section(unsigned long start_pfn)
struct mem_section *ms;
struct page *page, *memmap;
- if (!pfn_valid(start_pfn))
- return;
-
section_nr = pfn_to_section_nr(start_pfn);
ms = __nr_to_section(section_nr);
@@ -187,9 +184,16 @@ void register_page_bootmem_info_node(struct pglist_data *pgdat)
end_pfn = pfn + pgdat->node_spanned_pages;
/* register_section info */
- for (; pfn < end_pfn; pfn += PAGES_PER_SECTION)
- register_page_bootmem_info_section(pfn);
-
+ for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
+ /*
+ * Some platforms can assign the same pfn to multiple nodes - on
+ * node0 as well as nodeN. To avoid registering a pfn against
+ * multiple nodes we check that this pfn does not already
+ * reside in some other node.
+ */
+ if (pfn_valid(pfn) && (pfn_to_nid(pfn) == node))
+ register_page_bootmem_info_section(pfn);
+ }
}
#endif /* !CONFIG_SPARSEMEM_VMEMMAP */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Larry Finger <[email protected]>
commit 022e1d0680c7b4366017393417b8758be5abcee8 upstream.
There are a number of problems that occur for the latest version
of the Realtek RTL8188CE device with the in-kernel driver. These
include selection of the wrong firmware, and system lockup. A full
fix is known, but is too invasive for inclusion in stable. This patch
fixes the problem with loading the wrong firmware, and logs a message
that the device may not work for kernels 3.6 and older.
Signed-off-by: Larry Finger <[email protected]>
Cc: Anisse Astier <[email protected]>
Cc: Li Chaoming <[email protected]>
Tested-by: Anisse Astier <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
---
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
@@ -117,6 +117,7 @@
#define CHIP_VER_B BIT(4)
#define CHIP_92C_BITMASK BIT(0)
+#define CHIP_UNKNOWN BIT(7)
#define CHIP_92C_1T2R 0x03
#define CHIP_92C 0x01
#define CHIP_88C 0x00
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -1001,8 +1001,16 @@ static enum version_8192c _rtl92ce_read_
version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C :
VERSION_A_CHIP_88C;
} else {
- version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C :
- VERSION_B_CHIP_88C;
+ version = (enum version_8192c) (CHIP_VER_B |
+ ((value32 & TYPE_ID) ? CHIP_92C_BITMASK : 0) |
+ ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0));
+ if ((!IS_CHIP_VENDOR_UMC(version)) && (value32 &
+ CHIP_VER_RTL_MASK)) {
+ version = (enum version_8192c)(version |
+ ((((value32 & CHIP_VER_RTL_MASK) == BIT(12))
+ ? CHIP_VENDOR_UMC_B_CUT : CHIP_UNKNOWN) |
+ CHIP_VENDOR_UMC));
+ }
}
switch (version) {
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -165,12 +165,14 @@ int rtl92c_init_sw_vars(struct ieee80211
/* request fw */
if (IS_VENDOR_UMC_A_CUT(rtlhal->version) &&
- !IS_92C_SERIAL(rtlhal->version))
+ !IS_92C_SERIAL(rtlhal->version)) {
fw_name = "rtlwifi/rtl8192cfwU.bin";
- else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version))
+ } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {
fw_name = "rtlwifi/rtl8192cfwU_B.bin";
- else
+ pr_info("****** This B_CUT device may not work with kernels 3.6 and earlier\n");
+ } else {
fw_name = rtlpriv->cfg->fw_name;
+ }
err = request_firmware(&firmware, fw_name, rtlpriv->io.dev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ed Cashin <[email protected]>
[ Upstream commit c0d680e577ff171e7b37dbdb1b1bf5451e851f04 ]
A change in a series of VLAN-related changes appears to have
inadvertently disabled the use of the scatter gather feature of
network cards for transmission of non-IP ethernet protocols like ATA
over Ethernet (AoE). Below is a reference to the commit that
introduces a "harmonize_features" function that turns off scatter
gather when the NIC does not support hardware checksumming for the
ethernet protocol of an sk buff.
commit f01a5236bd4b140198fbcc550f085e8361fd73fa
Author: Jesse Gross <[email protected]>
Date: Sun Jan 9 06:23:31 2011 +0000
net offloading: Generalize netif_get_vlan_features().
The can_checksum_protocol function is not equipped to consider a
protocol that does not require checksumming. Calling it for a
protocol that requires no checksum is inappropriate.
The patch below has harmonize_features call can_checksum_protocol when
the protocol needs a checksum, so that the network layer is not forced
to perform unnecessary skb linearization on the transmission of AoE
packets. Unnecessary linearization results in decreased performance
and increased memory pressure, as reported here:
http://www.spinics.net/lists/linux-mm/msg15184.html
The problem has probably not been widely experienced yet, because
only recently has the kernel.org-distributed aoe driver acquired the
ability to use payloads of over a page in size, with the patchset
recently included in the mm tree:
https://lkml.org/lkml/2012/8/28/140
The coraid.com-distributed aoe driver already could use payloads of
greater than a page in size, but its users generally do not use the
newest kernels.
Signed-off-by: Ed Cashin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/core/dev.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index a4a0c5a..6cecd40 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2108,7 +2108,8 @@ static bool can_checksum_protocol(unsigned long features, __be16 protocol)
static u32 harmonize_features(struct sk_buff *skb, __be16 protocol, u32 features)
{
- if (!can_checksum_protocol(features, protocol)) {
+ if (skb->ip_summed != CHECKSUM_NONE &&
+ !can_checksum_protocol(features, protocol)) {
features &= ~NETIF_F_ALL_CSUM;
features &= ~NETIF_F_SG;
} else if (illegal_highdma(skb->dev, skb)) {
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matt Carlson <[email protected]>
[ Upstream commit cf9ecf4b631f649a964fa611f1a5e8874f2a76db ]
On the earliest TSO capable devices, TSO was accomplished through
firmware. The TSO cannot coexist with ASF management firmware though.
The tg3 driver determines whether or not ASF is enabled by calling
tg3_get_eeprom_hw_cfg(), which checks a particular bit of NIC memory.
Commit dabc5c670d3f86d15ee4f42ab38ec5bd2682487d, entitled "tg3: Move
TSO_CAPABLE assignment", accidentally moved the code that determines
TSO capabilities earlier than the call to tg3_get_eeprom_hw_cfg(). As a
consequence, the driver was attempting to determine TSO capabilities
before it had all the data it needed to make the decision.
This patch fixes the problem by revisiting and reevaluating the decision
after tg3_get_eeprom_hw_cfg() is called.
Signed-off-by: Matt Carlson <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/ethernet/broadcom/tg3.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 6b258d9..01bc102 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14013,9 +14013,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tg3_flag(tp, HW_TSO_1) ||
tg3_flag(tp, HW_TSO_2) ||
tg3_flag(tp, HW_TSO_3) ||
- (tp->fw_needed && !tg3_flag(tp, ENABLE_ASF)))
+ tp->fw_needed) {
+ /* For firmware TSO, assume ASF is disabled.
+ * We'll disable TSO later if we discover ASF
+ * is enabled in tg3_get_eeprom_hw_cfg().
+ */
tg3_flag_set(tp, TSO_CAPABLE);
- else {
+ } else {
tg3_flag_clear(tp, TSO_CAPABLE);
tg3_flag_clear(tp, TSO_BUG);
tp->fw_needed = NULL;
@@ -14290,6 +14294,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
*/
tg3_get_eeprom_hw_cfg(tp);
+ if (tp->fw_needed && tg3_flag(tp, ENABLE_ASF)) {
+ tg3_flag_clear(tp, TSO_CAPABLE);
+ tg3_flag_clear(tp, TSO_BUG);
+ tp->fw_needed = NULL;
+ }
+
if (tg3_flag(tp, ENABLE_APE)) {
/* Allow reads and writes to the
* APE register and memory space.
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hante Meuleman <[email protected]>
commit e020a83d0942a5aceac35986500c9834efc8707d upstream.
Fixes big endian host configuration parameters.
Reviewed-by: Arend Van Spriel <[email protected]>
Signed-off-by: Hante Meuleman <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <[email protected]>
---
.../net/wireless/brcm80211/brcmfmac/dhd_common.c | 26 ++++++++++++--------
1 file changed, 16 insertions(+), 10 deletions(-)
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -775,8 +775,11 @@ static void brcmf_c_arp_offload_set(stru
{
char iovbuf[32];
int retcode;
+ __le32 arp_mode_le;
- brcmf_c_mkiovar("arp_ol", (char *)&arp_mode, 4, iovbuf, sizeof(iovbuf));
+ arp_mode_le = cpu_to_le32(arp_mode);
+ brcmf_c_mkiovar("arp_ol", (char *)&arp_mode_le, 4, iovbuf,
+ sizeof(iovbuf));
retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR,
iovbuf, sizeof(iovbuf));
retcode = retcode >= 0 ? 0 : retcode;
@@ -792,8 +795,11 @@ static void brcmf_c_arp_offload_enable(s
{
char iovbuf[32];
int retcode;
+ __le32 arp_enable_le;
- brcmf_c_mkiovar("arpoe", (char *)&arp_enable, 4,
+ arp_enable_le = cpu_to_le32(arp_enable);
+
+ brcmf_c_mkiovar("arpoe", (char *)&arp_enable_le, 4,
iovbuf, sizeof(iovbuf));
retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR,
iovbuf, sizeof(iovbuf));
@@ -814,10 +820,10 @@ int brcmf_c_preinit_dcmds(struct brcmf_p
char buf[128], *ptr;
u32 dongle_align = BRCMF_SDALIGN;
u32 glom = 0;
- u32 roaming = 1;
- uint bcn_timeout = 3;
- int scan_assoc_time = 40;
- int scan_unassoc_time = 40;
+ __le32 roaming_le = cpu_to_le32(1);
+ __le32 bcn_timeout_le = cpu_to_le32(3);
+ __le32 scan_assoc_time_le = cpu_to_le32(40);
+ __le32 scan_unassoc_time_le = cpu_to_le32(40);
int i;
brcmf_os_proto_block(drvr);
@@ -852,14 +858,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_p
/* Setup timeout if Beacons are lost and roam is off to report
link down */
- brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf,
+ brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout_le, 4, iovbuf,
sizeof(iovbuf));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
sizeof(iovbuf));
/* Enable/Disable build-in roaming to allowed ext supplicant to take
of romaing */
- brcmf_c_mkiovar("roam_off", (char *)&roaming, 4,
+ brcmf_c_mkiovar("roam_off", (char *)&roaming_le, 4,
iovbuf, sizeof(iovbuf));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
sizeof(iovbuf));
@@ -874,9 +880,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_p
sizeof(iovbuf));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_CHANNEL_TIME,
- (char *)&scan_assoc_time, sizeof(scan_assoc_time));
+ (char *)&scan_assoc_time_le, sizeof(scan_assoc_time_le));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_UNASSOC_TIME,
- (char *)&scan_unassoc_time, sizeof(scan_unassoc_time));
+ (char *)&scan_unassoc_time_le, sizeof(scan_unassoc_time_le));
/* Set and enable ARP offload feature */
brcmf_c_arp_offload_set(drvr, BRCMF_ARPOL_MODE);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hante Meuleman <[email protected]>
commit ed205b361956c96e0d8c09a8c9135a6a79cd9541 upstream.
ssid len is 32 bit and needs endian conversion for big endian systems.
Signed-off-by: Hante Meuleman <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index c36e923..50b5553 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -500,8 +500,10 @@ static void wl_iscan_prep(struct brcmf_scan_params_le *params_le,
params_le->active_time = cpu_to_le32(-1);
params_le->passive_time = cpu_to_le32(-1);
params_le->home_time = cpu_to_le32(-1);
- if (ssid && ssid->SSID_len)
- memcpy(¶ms_le->ssid_le, ssid, sizeof(struct brcmf_ssid));
+ if (ssid && ssid->SSID_len) {
+ params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len);
+ memcpy(¶ms_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len);
+ }
}
static s32
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chema Gonzalez <[email protected]>
[ Upstream commit 6862234238e84648c305526af2edd98badcad1e0 ]
In the current rxhash calculation function, while the
sorting of the ports/addrs is coherent (you get the
same rxhash for packets sharing the same 4-tuple, in
both directions), ports and addrs are sorted
independently. This implies packets from a connection
between the same addresses but crossed ports hash to
the same rxhash.
For example, traffic between A=S:l and B=L:s is hashed
(in both directions) from {L, S, {s, l}}. The same
rxhash is obtained for packets between C=S:s and D=L:l.
This patch ensures that you either swap both addrs and ports,
or you swap none. Traffic between A and B, and traffic
between C and D, get their rxhash from different sources
({L, S, {l, s}} for A<->B, and {L, S, {s, l}} for C<->D)
The patch is co-written with Eric Dumazet <[email protected]>
Signed-off-by: Chema Gonzalez <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
net/core/dev.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index 832ba6d..a4a0c5a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2686,16 +2686,17 @@ ipv6:
nhoff += poff;
if (pskb_may_pull(skb, nhoff + 4)) {
ports.v32 = * (__force u32 *) (skb->data + nhoff);
- if (ports.v16[1] < ports.v16[0])
- swap(ports.v16[0], ports.v16[1]);
skb->l4_rxhash = 1;
}
}
/* get a consistent hash (same value on both flow directions) */
- if (addr2 < addr1)
+ if (addr2 < addr1 ||
+ (addr2 == addr1 &&
+ ports.v16[1] < ports.v16[0])) {
swap(addr1, addr2);
-
+ swap(ports.v16[0], ports.v16[1]);
+ }
hash = jhash_3words(addr1, addr2, ports.v32, hashrnd);
if (!hash)
hash = 1;
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Toshi Kani <[email protected]>
commit 308b135e4fcc00c80c07e0e04e7afa8edf78583c upstream.
kdump can be interrupted by watchdog timer when the timer is left
activated on the crash kernel. Changed the hpwdt driver to disable
watchdog timer at boot-time. This assures that watchdog timer is
disabled until /dev/watchdog is opened, and prevents watchdog timer
to be left running on the crash kernel.
Signed-off-by: Toshi Kani <[email protected]>
Tested-by: Lisa Mitchell <[email protected]>
Signed-off-by: Thomas Mingarelli <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/watchdog/hpwdt.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 1eff743..ae60406 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -814,6 +814,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
hpwdt_timer_reg = pci_mem_addr + 0x70;
hpwdt_timer_con = pci_mem_addr + 0x72;
+ /* Make sure that timer is disabled until /dev/watchdog is opened */
+ hpwdt_stop();
+
/* Make sure that we have a valid soft_margin */
if (hpwdt_change_timer(soft_margin))
hpwdt_change_timer(DEFAULT_MARGIN);
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 4c054ba63ad47ef244cfcfa1cea38134620a5bae upstream.
This patch fixes a long-standing bug with SCSI overflow handling
where se_cmd->data_length was incorrectly being re-assigned to
the larger CDB extracted allocation length, resulting in a number
of fabric level errors that would end up causing a session reset
in most cases. So instead now:
- Only re-assign se_cmd->data_length durining UNDERFLOW (to use the
smaller value)
- Use existing se_cmd->data_length for OVERFLOW (to use the smaller
value)
This fix has been tested with the following CDB to generate an
SCSI overflow:
sg_raw -r512 /dev/sdc 28 0 0 0 0 0 0 0 9 0
Tested using iscsi-target, tcm_qla2xxx, loopback and tcm_vhost fabric
ports. Here is a bit more detail on each case:
- iscsi-target: Bug with open-iscsi with overflow, sg_raw returns
-3584 bytes of data.
- tcm_qla2xxx: Working as expected, returnins 512 bytes of data
- loopback: sg_raw returns CHECK_CONDITION, from overflow rejection
in transport_generic_map_mem_to_cmd()
- tcm_vhost: Same as loopback
Reported-by: Roland Dreier <[email protected]>
Cc: Roland Dreier <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Boaz Harrosh <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/target/target_core_transport.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3039,15 +3039,20 @@ static int transport_generic_cmd_sequenc
/* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
goto out_invalid_cdb_field;
}
-
+ /*
+ * For the overflow case keep the existing fabric provided
+ * ->data_length. Otherwise for the underflow case, reset
+ * ->data_length to the smaller SCSI expected data transfer
+ * length.
+ */
if (size > cmd->data_length) {
cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
cmd->residual_count = (size - cmd->data_length);
} else {
cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
cmd->residual_count = (cmd->data_length - size);
+ cmd->data_length = size;
}
- cmd->data_length = size;
}
/* reject any command that we don't have a handler for */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yasunori Goto <[email protected]>
commit b5740f4b2cb3503b436925eb2242bc3d75cd3dfe upstream.
try_to_wake_up() has a problem which may change status from TASK_DEAD to
TASK_RUNNING in race condition with SMI or guest environment of virtual
machine. As a result, exited task is scheduled() again and panic occurs.
Here is the sequence how it occurs:
----------------------------------+-----------------------------
|
CPU A | CPU B
----------------------------------+-----------------------------
TASK A calls exit()....
do_exit()
exit_mm()
down_read(mm->mmap_sem);
rwsem_down_failed_common()
set TASK_UNINTERRUPTIBLE
set waiter.task <= task A
list_add to sem->wait_list
:
raw_spin_unlock_irq()
(I/O interruption occured)
__rwsem_do_wake(mmap_sem)
list_del(&waiter->list);
waiter->task = NULL
wake_up_process(task A)
try_to_wake_up()
(task is still
TASK_UNINTERRUPTIBLE)
p->on_rq is still 1.)
ttwu_do_wakeup()
(*A)
:
(I/O interruption handler finished)
if (!waiter.task)
schedule() is not called
due to waiter.task is NULL.
tsk->state = TASK_RUNNING
:
check_preempt_curr();
:
task->state = TASK_DEAD
(*B)
<--- set TASK_RUNNING (*C)
schedule()
(exit task is running again)
BUG_ON() is called!
--------------------------------------------------------
The execution time between (*A) and (*B) is usually very short,
because the interruption is disabled, and setting TASK_RUNNING at (*C)
must be executed before setting TASK_DEAD.
HOWEVER, if SMI is interrupted between (*A) and (*B),
(*C) is able to execute AFTER setting TASK_DEAD!
Then, exited task is scheduled again, and BUG_ON() is called....
If the system works on guest system of virtual machine, the time
between (*A) and (*B) may be also long due to scheduling of hypervisor,
and same phenomenon can occur.
By this patch, do_exit() waits for releasing task->pi_lock which is used
in try_to_wake_up(). It guarantees the task becomes TASK_DEAD after
waking up.
Signed-off-by: Yasunori Goto <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
kernel/exit.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1019,6 +1019,22 @@ NORET_TYPE void do_exit(long code)
preempt_disable();
exit_rcu();
+
+ /*
+ * The setting of TASK_RUNNING by try_to_wake_up() may be delayed
+ * when the following two conditions become true.
+ * - There is race condition of mmap_sem (It is acquired by
+ * exit_mm()), and
+ * - SMI occurs before setting TASK_RUNINNG.
+ * (or hypervisor of virtual machine switches to other guest)
+ * As a result, we may become TASK_RUNNING after becoming TASK_DEAD
+ *
+ * To avoid it, we have to wait for releasing tsk->pi_lock which
+ * is held by try_to_wake_up()
+ */
+ smp_mb();
+ raw_spin_unlock_wait(&tsk->pi_lock);
+
/* causes final put_task_struct in finish_task_switch(). */
tsk->state = TASK_DEAD;
schedule();
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <[email protected]>
commit 6889125b8b4e09c5e53e6ecab3433bed1ce198c9 upstream.
powernowk8_target() runs off a per-cpu work item and if the
cpufreq_policy->cpu is different from the current one, it migrates the
kworker to the target CPU by manipulating current->cpus_allowed. The
function migrates the kworker back to the original CPU but this is
still broken. Workqueue concurrency management requires the kworkers
to stay on the same CPU and powernowk8_target() ends up triggerring
BUG_ON(rq != this_rq()) in try_to_wake_up_local() if it contends on
fidvid_mutex and sleeps.
It is unclear why this bug is being reported now. Duncan says it
appeared to be a regression of 3.6-rc1 and couldn't reproduce it on
3.5. Bisection seemed to point to 63d95a91 "workqueue: use @pool
instead of @gcwq or @cpu where applicable" which is an non-functional
change. Given that the reproduce case sometimes took upto days to
trigger, it's easy to be misled while bisecting. Maybe something made
contention on fidvid_mutex more likely? I don't know.
This patch fixes the bug by using work_on_cpu() instead if @pol->cpu
isn't the same as the current one. The code assumes that
cpufreq_policy->cpu is kept online by the caller, which Rafael tells
me is the case.
stable: ed48ece27c ("workqueue: reimplement work_on_cpu() using
system_wq") should be applied before this; otherwise, the
behavior could be horrible.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Duncan <[email protected]>
Tested-by: Duncan <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Andreas Herrmann <[email protected]>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47301
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/cpufreq/powernow-k8.c | 63 ++++++++++++++++++++++-------------------
1 file changed, 34 insertions(+), 29 deletions(-)
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index c0e8164..1a40935 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -35,7 +35,6 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/cpumask.h>
-#include <linux/sched.h> /* for current / set_cpus_allowed() */
#include <linux/io.h>
#include <linux/delay.h>
@@ -1139,16 +1138,23 @@ static int transition_frequency_pstate(struct powernow_k8_data *data,
return res;
}
-/* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol,
- unsigned targfreq, unsigned relation)
+struct powernowk8_target_arg {
+ struct cpufreq_policy *pol;
+ unsigned targfreq;
+ unsigned relation;
+};
+
+static long powernowk8_target_fn(void *arg)
{
- cpumask_var_t oldmask;
+ struct powernowk8_target_arg *pta = arg;
+ struct cpufreq_policy *pol = pta->pol;
+ unsigned targfreq = pta->targfreq;
+ unsigned relation = pta->relation;
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
u32 checkfid;
u32 checkvid;
unsigned int newstate;
- int ret = -EIO;
+ int ret;
if (!data)
return -EINVAL;
@@ -1156,29 +1162,16 @@ static int powernowk8_target(struct cpufreq_policy *pol,
checkfid = data->currfid;
checkvid = data->currvid;
- /* only run on specific CPU from here on. */
- /* This is poor form: use a workqueue or smp_call_function_single */
- if (!alloc_cpumask_var(&oldmask, GFP_KERNEL))
- return -ENOMEM;
-
- cpumask_copy(oldmask, tsk_cpus_allowed(current));
- set_cpus_allowed_ptr(current, cpumask_of(pol->cpu));
-
- if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
- goto err_out;
- }
-
if (pending_bit_stuck()) {
printk(KERN_ERR PFX "failing targ, change pending bit set\n");
- goto err_out;
+ return -EIO;
}
pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
pol->cpu, targfreq, pol->min, pol->max, relation);
if (query_current_values_with_pending_wait(data))
- goto err_out;
+ return -EIO;
if (cpu_family != CPU_HW_PSTATE) {
pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
@@ -1196,7 +1189,7 @@ static int powernowk8_target(struct cpufreq_policy *pol,
if (cpufreq_frequency_table_target(pol, data->powernow_table,
targfreq, relation, &newstate))
- goto err_out;
+ return -EIO;
mutex_lock(&fidvid_mutex);
@@ -1209,9 +1202,8 @@ static int powernowk8_target(struct cpufreq_policy *pol,
ret = transition_frequency_fidvid(data, newstate);
if (ret) {
printk(KERN_ERR PFX "transition frequency failed\n");
- ret = 1;
mutex_unlock(&fidvid_mutex);
- goto err_out;
+ return 1;
}
mutex_unlock(&fidvid_mutex);
@@ -1220,12 +1212,25 @@ static int powernowk8_target(struct cpufreq_policy *pol,
data->powernow_table[newstate].index);
else
pol->cur = find_khz_freq_from_fid(data->currfid);
- ret = 0;
-err_out:
- set_cpus_allowed_ptr(current, oldmask);
- free_cpumask_var(oldmask);
- return ret;
+ return 0;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol,
+ unsigned targfreq, unsigned relation)
+{
+ struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
+ .relation = relation };
+
+ /*
+ * Must run on @pol->cpu. cpufreq core is responsible for ensuring
+ * that we're bound to the current CPU and pol->cpu stays online.
+ */
+ if (smp_processor_id() == pol->cpu)
+ return powernowk8_target_fn(&pta);
+ else
+ return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
}
/* Driver entry point to verify the policy and range of frequencies */
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Ferre <[email protected]>
commit c618a9be0e8c0f36baee2560860a0118a428fb26 upstream.
s/dma_memcpy/slave_sg/ and it is sg length that we are
talking about.
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/dma/at_hdmac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 3934fcc..6c09e18 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -661,7 +661,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
flags);
if (unlikely(!atslave || !sg_len)) {
- dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ dev_dbg(chan2dev(chan), "prep_slave_sg: sg length is zero!\n");
return NULL;
}
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Ferre <[email protected]>
commit c456797681db814f4f5b36909e8e94047bf53d9c upstream.
Avoid the construction of a malformed DMA request sent to
the DMA controller.
Log message is for debug only because this condition is unlikely to
append and may only trigger at driver development time.
Signed-off-by: Nicolas Ferre <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
---
drivers/dma/at_hdmac.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 6c09e18..7ab6e26 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -689,6 +689,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan),
+ "prep_slave_sg: sg(%d) data length is zero\n", i);
+ goto err;
+ }
mem_width = 2;
if (unlikely(mem & 3 || len & 3))
mem_width = 0;
@@ -724,6 +729,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan),
+ "prep_slave_sg: sg(%d) data length is zero\n", i);
+ goto err;
+ }
mem_width = 2;
if (unlikely(mem & 3 || len & 3))
mem_width = 0;
@@ -757,6 +767,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
err_desc_get:
dev_err(chan2dev(chan), "not enough descriptors available\n");
+err:
atc_desc_put(atchan, first);
return NULL;
}
diff --git a/Makefile b/Makefile
index 9fd7e60..a815851 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
-SUBLEVEL = 30
-EXTRAVERSION =
+SUBLEVEL = 31
+EXTRAVERSION = -rc1
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 9c18ebd..d63632f 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -648,6 +648,7 @@ __armv7_mmu_cache_on:
mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
#endif
mrc p15, 0, r0, c1, c0, 0 @ read control reg
+ bic r0, r0, #1 << 28 @ clear SCTLR.TRE
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
#ifdef CONFIG_MMU
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index c9a9cf6..4adeb3e 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -517,7 +517,8 @@ static void __init armadillo5x0_init(void)
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
/* set NAND page size to 2k if not configured via boot mode pins */
- __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+ __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
+ (1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
/* RTC */
/* Get RTC IRQ and register the chip */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 73ef56c..bda833c 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -160,7 +160,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] =
#endif
#ifdef P6_NOP1
-static const unsigned char __initconst_or_module p6nops[] =
+static const unsigned char p6nops[] =
{
P6_NOP1,
P6_NOP2,
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 44d4393..a1e21ae 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1289,6 +1289,10 @@ asmlinkage void __init xen_start_kernel(void)
/* Make sure ACS will be enabled */
pci_request_acs();
+
+ /* Avoid searching for BIOS MP tables */
+ x86_init.mpparse.find_smp_config = x86_init_noop;
+ x86_init.mpparse.get_smp_config = x86_init_uint_noop;
}
#ifdef CONFIG_PCI
/* PCI BIOS service won't work from a PV guest. */
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index bb104b4..6e5a7f1 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -16,6 +16,7 @@
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/acpi.h>
+#include <asm/numa.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -431,4 +432,7 @@ void __init xen_arch_setup(void)
boot_option_idle_override = IDLE_HALT;
WARN_ON(set_pm_idle_to_default());
fiddle_vdso();
+#ifdef CONFIG_NUMA
+ numa_off = 1;
+#endif
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c04ad68..321e23e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4118,6 +4118,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+ { "Seagate FreeAgent GoFlex", NULL, ATA_HORKAGE_1_5_GBPS, },
/*
* Devices which choke on SETXFER. Applies only if both the
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index de0435e..887f68f 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -35,6 +35,7 @@ new_skb(ulong len)
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
skb->protocol = __constant_htons(ETH_P_AOE);
+ skb_checksum_none_assert(skb);
}
return skb;
}
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 38aa6dd..da33111 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -795,6 +795,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout,
}
break;
case CMD_PROTOCOL_ERR:
+ cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev,
"%p has protocol error\n", c);
break;
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index c3f0ee1..86848c6 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -445,6 +445,14 @@ static void nbd_clear_que(struct nbd_device *lo)
req->errors++;
nbd_end_request(req);
}
+
+ while (!list_empty(&lo->waiting_queue)) {
+ req = list_entry(lo->waiting_queue.next, struct request,
+ queuelist);
+ list_del_init(&req->queuelist);
+ req->errors++;
+ nbd_end_request(req);
+ }
}
@@ -594,6 +602,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *lo,
lo->file = NULL;
nbd_clear_que(lo);
BUG_ON(!list_empty(&lo->queue_head));
+ BUG_ON(!list_empty(&lo->waiting_queue));
if (file)
fput(file);
return 0;
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index f1bd44f..5c6709d 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -62,6 +62,7 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3002) },
+ { USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
{ USB_DEVICE(0x0930, 0x0215) },
{ USB_DEVICE(0x0489, 0xE03D) },
@@ -76,12 +77,15 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
+ { USB_DEVICE(0x0930, 0x0219) },
+ { USB_DEVICE(0x0489, 0xe057) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C) },
+ { USB_DEVICE(0x0489, 0xE036) },
{ } /* Terminating entry */
};
@@ -100,9 +104,12 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fc4bcd6..6f95d98 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -60,6 +60,9 @@ static struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
+ /* Apple-specific (Broadcom) devices */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
@@ -102,15 +105,14 @@ static struct usb_device_id btusb_table[] = {
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0489, 0xe042) },
- { USB_DEVICE(0x0a5c, 0x21e3) },
- { USB_DEVICE(0x0a5c, 0x21e6) },
- { USB_DEVICE(0x0a5c, 0x21e8) },
- { USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
/* Foxconn - Hon Hai */
{ USB_DEVICE(0x0489, 0xe033) },
+ /*Broadcom devices with vendor specific id */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
+
{ } /* Terminating entry */
};
@@ -125,6 +127,7 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
@@ -139,12 +142,15 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index ad683ec..b7fe343 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -32,7 +32,6 @@
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/cpumask.h>
-#include <linux/sched.h> /* for current / set_cpus_allowed() */
#include <linux/io.h>
#include <linux/delay.h>
@@ -1132,16 +1131,23 @@ static int transition_frequency_pstate(struct powernow_k8_data *data,
return res;
}
-/* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol,
- unsigned targfreq, unsigned relation)
+struct powernowk8_target_arg {
+ struct cpufreq_policy *pol;
+ unsigned targfreq;
+ unsigned relation;
+};
+
+static long powernowk8_target_fn(void *arg)
{
- cpumask_var_t oldmask;
+ struct powernowk8_target_arg *pta = arg;
+ struct cpufreq_policy *pol = pta->pol;
+ unsigned targfreq = pta->targfreq;
+ unsigned relation = pta->relation;
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
u32 checkfid;
u32 checkvid;
unsigned int newstate;
- int ret = -EIO;
+ int ret;
if (!data)
return -EINVAL;
@@ -1149,29 +1155,16 @@ static int powernowk8_target(struct cpufreq_policy *pol,
checkfid = data->currfid;
checkvid = data->currvid;
- /* only run on specific CPU from here on. */
- /* This is poor form: use a workqueue or smp_call_function_single */
- if (!alloc_cpumask_var(&oldmask, GFP_KERNEL))
- return -ENOMEM;
-
- cpumask_copy(oldmask, tsk_cpus_allowed(current));
- set_cpus_allowed_ptr(current, cpumask_of(pol->cpu));
-
- if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
- goto err_out;
- }
-
if (pending_bit_stuck()) {
printk(KERN_ERR PFX "failing targ, change pending bit set\n");
- goto err_out;
+ return -EIO;
}
pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n",
pol->cpu, targfreq, pol->min, pol->max, relation);
if (query_current_values_with_pending_wait(data))
- goto err_out;
+ return -EIO;
if (cpu_family != CPU_HW_PSTATE) {
pr_debug("targ: curr fid 0x%x, vid 0x%x\n",
@@ -1189,7 +1182,7 @@ static int powernowk8_target(struct cpufreq_policy *pol,
if (cpufreq_frequency_table_target(pol, data->powernow_table,
targfreq, relation, &newstate))
- goto err_out;
+ return -EIO;
mutex_lock(&fidvid_mutex);
@@ -1202,9 +1195,8 @@ static int powernowk8_target(struct cpufreq_policy *pol,
ret = transition_frequency_fidvid(data, newstate);
if (ret) {
printk(KERN_ERR PFX "transition frequency failed\n");
- ret = 1;
mutex_unlock(&fidvid_mutex);
- goto err_out;
+ return 1;
}
mutex_unlock(&fidvid_mutex);
@@ -1213,12 +1205,25 @@ static int powernowk8_target(struct cpufreq_policy *pol,
data->powernow_table[newstate].index);
else
pol->cur = find_khz_freq_from_fid(data->currfid);
- ret = 0;
-err_out:
- set_cpus_allowed_ptr(current, oldmask);
- free_cpumask_var(oldmask);
- return ret;
+ return 0;
+}
+
+/* Driver entry point to switch to the target frequency */
+static int powernowk8_target(struct cpufreq_policy *pol,
+ unsigned targfreq, unsigned relation)
+{
+ struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq,
+ .relation = relation };
+
+ /*
+ * Must run on @pol->cpu. cpufreq core is responsible for ensuring
+ * that we're bound to the current CPU and pol->cpu stays online.
+ */
+ if (smp_processor_id() == pol->cpu)
+ return powernowk8_target_fn(&pta);
+ else
+ return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta);
}
/* Driver entry point to verify the policy and range of frequencies */
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 79dcf6e..c60d9c1 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -678,7 +678,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
flags);
if (unlikely(!atslave || !sg_len)) {
- dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+ dev_dbg(chan2dev(chan), "prep_slave_sg: sg length is zero!\n");
return NULL;
}
@@ -706,6 +706,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan),
+ "prep_slave_sg: sg(%d) data length is zero\n", i);
+ goto err;
+ }
mem_width = 2;
if (unlikely(mem & 3 || len & 3))
mem_width = 0;
@@ -740,6 +745,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
mem = sg_dma_address(sg);
len = sg_dma_len(sg);
+ if (unlikely(!len)) {
+ dev_dbg(chan2dev(chan),
+ "prep_slave_sg: sg(%d) data length is zero\n", i);
+ goto err;
+ }
mem_width = 2;
if (unlikely(mem & 3 || len & 3))
mem_width = 0;
@@ -773,6 +783,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
err_desc_get:
dev_err(chan2dev(chan), "not enough descriptors available\n");
+err:
atc_desc_put(atchan, first);
return NULL;
}
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 57104147..e8eedb7 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -858,6 +858,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
/* Initialize channel parameters */
num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
+ if (!pdmac->peripherals) {
+ ret = -ENOMEM;
+ dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n");
+ goto probe_err4;
+ }
for (i = 0; i < num_chan; i++) {
pch = &pdmac->peripherals[i];
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 0db57b5..da71881 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -554,7 +554,8 @@ static int get_dimm_config(const struct mem_ctl_info *mci)
{
struct sbridge_pvt *pvt = mci->pvt_info;
struct csrow_info *csr;
- int i, j, banks, ranks, rows, cols, size, npages;
+ unsigned i, j, banks, ranks, rows, cols, npages;
+ u64 size;
int csrow = 0;
unsigned long last_page = 0;
u32 reg;
@@ -626,10 +627,10 @@ static int get_dimm_config(const struct mem_ctl_info *mci)
cols = numcol(mtr);
/* DDR3 has 8 I/O banks */
- size = (rows * cols * banks * ranks) >> (20 - 3);
+ size = ((u64)rows * cols * banks * ranks) >> (20 - 3);
npages = MiB_TO_PAGES(size);
- debugf0("mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+ debugf0("mc#%d: channel %d, dimm %d, %Ld Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
pvt->sbridge_dev->mc, i, j,
size, npages,
banks, ranks, rows, cols);
diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c
index 5b69480..2c40776 100644
--- a/drivers/gpio/gpio-lpc32xx.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -295,6 +295,7 @@ static int lpc32xx_gpio_dir_output_p012(struct gpio_chip *chip, unsigned pin,
{
struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+ __set_gpio_level_p012(group, pin, value);
__set_gpio_dir_p012(group, pin, 0);
return 0;
@@ -305,6 +306,7 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
{
struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+ __set_gpio_level_p3(group, pin, value);
__set_gpio_dir_p3(group, pin, 0);
return 0;
@@ -313,6 +315,9 @@ static int lpc32xx_gpio_dir_output_p3(struct gpio_chip *chip, unsigned pin,
static int lpc32xx_gpio_dir_out_always(struct gpio_chip *chip, unsigned pin,
int value)
{
+ struct lpc32xx_gpio_chip *group = to_lpc32xx_gpio(chip);
+
+ __set_gpo_level_p3(group, pin, value);
return 0;
}
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 548a400..e48e01e 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3357,7 +3357,8 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj,
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
- BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT);
+ if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT))
+ return -EBUSY;
WARN_ON(i915_verify_lists(dev));
if (obj->gtt_space != NULL) {
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 9cd81ba..c2a64f4 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -271,7 +271,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode)
u32 temp;
u32 enable_bits = SDVO_ENABLE;
- if (intel_hdmi->has_audio)
+ if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON)
enable_bits |= SDVO_AUDIO_ENABLE;
temp = I915_READ(intel_hdmi->sdvox_reg);
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index ceffd20..a4011b0 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1446,98 +1446,14 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc)
}
}
-/**
- * radeon_get_pll_use_mask - look up a mask of which pplls are in use
- *
- * @crtc: drm crtc
- *
- * Returns the mask of which PPLLs (Pixel PLLs) are in use.
- */
-static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_crtc *test_crtc;
- struct radeon_crtc *radeon_test_crtc;
- u32 pll_in_use = 0;
-
- list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
- if (crtc == test_crtc)
- continue;
-
- radeon_test_crtc = to_radeon_crtc(test_crtc);
- if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
- pll_in_use |= (1 << radeon_test_crtc->pll_id);
- }
- return pll_in_use;
-}
-
-/**
- * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP
- *
- * @crtc: drm crtc
- *
- * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is
- * also in DP mode. For DP, a single PPLL can be used for all DP
- * crtcs/encoders.
- */
-static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_encoder *test_encoder;
- struct radeon_crtc *radeon_test_crtc;
-
- list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
- if (test_encoder->crtc && (test_encoder->crtc != crtc)) {
- if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
- /* for DP use the same PLL for all */
- radeon_test_crtc = to_radeon_crtc(test_encoder->crtc);
- if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID)
- return radeon_test_crtc->pll_id;
- }
- }
- }
- return ATOM_PPLL_INVALID;
-}
-
-/**
- * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc.
- *
- * @crtc: drm crtc
- *
- * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors
- * a single PPLL can be used for all DP crtcs/encoders. For non-DP
- * monitors a dedicated PPLL must be used. If a particular board has
- * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming
- * as there is no need to program the PLL itself. If we are not able to
- * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to
- * avoid messing up an existing monitor.
- *
- * Asic specific PLL information
- *
- * DCE 6.1
- * - PPLL2 is only available to UNIPHYA (both DP and non-DP)
- * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP)
- *
- * DCE 6.0
- * - PPLL0 is available to all UNIPHY (DP only)
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- * DCE 5.0
- * - DCPLL is available to all UNIPHY (DP only)
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- * DCE 3.0/4.0/4.1
- * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC
- *
- */
static int radeon_atom_pick_pll(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *test_encoder;
- u32 pll_in_use;
- int pll;
+ struct drm_crtc *test_crtc;
+ uint32_t pll_in_use = 0;
if (ASIC_IS_DCE4(rdev)) {
list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) {
@@ -1545,7 +1461,7 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
/* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
* depending on the asic:
* DCE4: PPLL or ext clock
- * DCE5: PPLL, DCPLL, or ext clock
+ * DCE5: DCPLL or ext clock
*
* Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
* PPLL/DCPLL programming and only program the DP DTO for the
@@ -1553,31 +1469,29 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc)
*/
if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) {
if (rdev->clock.dp_extclk)
- /* skip PPLL programming if using ext clock */
return ATOM_PPLL_INVALID;
else if (ASIC_IS_DCE5(rdev))
- /* use DCPLL for all DP */
return ATOM_DCPLL;
- else {
- /* use the same PPLL for all DP monitors */
- pll = radeon_get_shared_dp_ppll(crtc);
- if (pll != ATOM_PPLL_INVALID)
- return pll;
- }
}
- break;
}
}
- /* all other cases */
- pll_in_use = radeon_get_pll_use_mask(crtc);
- if (!(pll_in_use & (1 << ATOM_PPLL2)))
- return ATOM_PPLL2;
- if (!(pll_in_use & (1 << ATOM_PPLL1)))
+
+ /* otherwise, pick one of the plls */
+ list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) {
+ struct radeon_crtc *radeon_test_crtc;
+
+ if (crtc == test_crtc)
+ continue;
+
+ radeon_test_crtc = to_radeon_crtc(test_crtc);
+ if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) &&
+ (radeon_test_crtc->pll_id <= ATOM_PPLL2))
+ pll_in_use |= (1 << radeon_test_crtc->pll_id);
+ }
+ if (!(pll_in_use & 1))
return ATOM_PPLL1;
- DRM_ERROR("unable to allocate a PPLL\n");
- return ATOM_PPLL_INVALID;
+ return ATOM_PPLL2;
} else
- /* use PPLL1 or PPLL2 */
return radeon_crtc->crtc_id;
}
@@ -1696,7 +1610,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc)
break;
}
done:
- radeon_crtc->pll_id = ATOM_PPLL_INVALID;
+ radeon_crtc->pll_id = -1;
}
static const struct drm_crtc_helper_funcs atombios_helper_funcs = {
@@ -1745,6 +1659,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
else
radeon_crtc->crtc_offset = 0;
}
- radeon_crtc->pll_id = ATOM_PPLL_INVALID;
+ radeon_crtc->pll_id = -1;
drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
}
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 0c8bea9..a21e763 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1026,7 +1026,7 @@ static struct hid_report *hid_get_report(struct hid_report_enum *report_enum,
return report;
}
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt)
{
struct hid_report_enum *report_enum = hid->report_enum + type;
@@ -1034,10 +1034,11 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
unsigned int a;
int rsize, csize = size;
u8 *cdata = data;
+ int ret = 0;
report = hid_get_report(report_enum, data);
if (!report)
- return;
+ goto out;
if (report_enum->numbered) {
cdata++;
@@ -1057,14 +1058,19 @@ void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_report_event)
hid->hiddev_report_event(hid, report);
- if (hid->claimed & HID_CLAIMED_HIDRAW)
- hidraw_report_event(hid, data, size);
+ if (hid->claimed & HID_CLAIMED_HIDRAW) {
+ ret = hidraw_report_event(hid, data, size);
+ if (ret)
+ goto out;
+ }
for (a = 0; a < report->maxfield; a++)
hid_input_field(hid, report->field[a], cdata, interrupt);
if (hid->claimed & HID_CLAIMED_INPUT)
hidinput_report_event(hid, report);
+out:
+ return ret;
}
EXPORT_SYMBOL_GPL(hid_report_raw_event);
@@ -1141,7 +1147,7 @@ nomem:
}
}
- hid_report_raw_event(hid, type, data, size, interrupt);
+ ret = hid_report_raw_event(hid, type, data, size, interrupt);
unlock:
up(&hid->driver_lock);
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 2eac8c5..8821ecc 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -185,6 +185,7 @@ static struct hid_ll_driver logi_dj_ll_driver;
static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
size_t count,
unsigned char report_type);
+static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev);
static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
struct dj_report *dj_report)
@@ -225,6 +226,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] &
SPFUNCTION_DEVICE_LIST_EMPTY) {
dbg_hid("%s: device list is empty\n", __func__);
+ djrcv_dev->querying_devices = false;
return;
}
@@ -235,6 +237,12 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
return;
}
+ if (djrcv_dev->paired_dj_devices[dj_report->device_index]) {
+ /* The device is already known. No need to reallocate it. */
+ dbg_hid("%s: device is already known\n", __func__);
+ return;
+ }
+
dj_hiddev = hid_allocate_device();
if (IS_ERR(dj_hiddev)) {
dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n",
@@ -298,6 +306,7 @@ static void delayedwork_callback(struct work_struct *work)
struct dj_report dj_report;
unsigned long flags;
int count;
+ int retval;
dbg_hid("%s\n", __func__);
@@ -330,6 +339,25 @@ static void delayedwork_callback(struct work_struct *work)
logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report);
break;
default:
+ /* A normal report (i. e. not belonging to a pair/unpair notification)
+ * arriving here, means that the report arrived but we did not have a
+ * paired dj_device associated to the report's device_index, this
+ * means that the original "device paired" notification corresponding
+ * to this dj_device never arrived to this driver. The reason is that
+ * hid-core discards all packets coming from a device while probe() is
+ * executing. */
+ if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) {
+ /* ok, we don't know the device, just re-ask the
+ * receiver for the list of connected devices. */
+ retval = logi_dj_recv_query_paired_devices(djrcv_dev);
+ if (!retval) {
+ /* everything went fine, so just leave */
+ break;
+ }
+ dev_err(&djrcv_dev->hdev->dev,
+ "%s:logi_dj_recv_query_paired_devices "
+ "error:%d\n", __func__, retval);
+ }
dbg_hid("%s: unexpected report type\n", __func__);
}
}
@@ -360,6 +388,12 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev,
if (!djdev) {
dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]"
" is NULL, index %d\n", dj_report->device_index);
+ kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
+
+ if (schedule_work(&djrcv_dev->work) == 0) {
+ dbg_hid("%s: did not schedule the work item, was already "
+ "queued\n", __func__);
+ }
return;
}
@@ -390,6 +424,12 @@ static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev,
if (dj_device == NULL) {
dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]"
" is NULL, index %d\n", dj_report->device_index);
+ kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
+
+ if (schedule_work(&djrcv_dev->work) == 0) {
+ dbg_hid("%s: did not schedule the work item, was already "
+ "queued\n", __func__);
+ }
return;
}
@@ -428,27 +468,42 @@ static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
+
+ /* no need to protect djrcv_dev->querying_devices */
+ if (djrcv_dev->querying_devices)
+ return 0;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
+
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
- struct dj_report dj_report;
+ struct dj_report *dj_report;
+ int retval;
- memset(&dj_report, 0, sizeof(dj_report));
- dj_report.report_id = REPORT_ID_DJ_SHORT;
- dj_report.device_index = 0xFF;
- dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
- dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x1F;
- dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
- return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+ dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
+ if (!dj_report)
+ return -ENOMEM;
+ dj_report->report_id = REPORT_ID_DJ_SHORT;
+ dj_report->device_index = 0xFF;
+ dj_report->report_type = REPORT_TYPE_CMD_SWITCH;
+ dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
+ dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+ retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
+ kfree(dj_report);
+ return retval;
}
diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h
index fd28a5e..4a40003 100644
--- a/drivers/hid/hid-logitech-dj.h
+++ b/drivers/hid/hid-logitech-dj.h
@@ -101,6 +101,7 @@ struct dj_receiver_dev {
struct work_struct work;
struct kfifo notif_fifo;
spinlock_t lock;
+ bool querying_devices;
};
struct dj_device {
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index cf7d6d5..17d15bb 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -42,6 +42,7 @@ static struct cdev hidraw_cdev;
static struct class *hidraw_class;
static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES];
static DEFINE_MUTEX(minors_lock);
+static void drop_ref(struct hidraw *hid, int exists_bit);
static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
{
@@ -87,13 +88,16 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
len = list->buffer[list->tail].len > count ?
count : list->buffer[list->tail].len;
- if (copy_to_user(buffer, list->buffer[list->tail].value, len)) {
- ret = -EFAULT;
- goto out;
+ if (list->buffer[list->tail].value) {
+ if (copy_to_user(buffer, list->buffer[list->tail].value, len)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ ret = len;
}
- ret = len;
kfree(list->buffer[list->tail].value);
+ list->buffer[list->tail].value = NULL;
list->tail = (list->tail + 1) & (HIDRAW_BUFFER_SIZE - 1);
}
out:
@@ -110,7 +114,7 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
__u8 *buf;
int ret = 0;
- if (!hidraw_table[minor]) {
+ if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
ret = -ENODEV;
goto out;
}
@@ -258,7 +262,7 @@ static int hidraw_open(struct inode *inode, struct file *file)
}
mutex_lock(&minors_lock);
- if (!hidraw_table[minor]) {
+ if (!hidraw_table[minor] || !hidraw_table[minor]->exist) {
err = -ENODEV;
goto out_unlock;
}
@@ -295,32 +299,12 @@ out:
static int hidraw_release(struct inode * inode, struct file * file)
{
unsigned int minor = iminor(inode);
- struct hidraw *dev;
struct hidraw_list *list = file->private_data;
- int ret;
-
- mutex_lock(&minors_lock);
- if (!hidraw_table[minor]) {
- ret = -ENODEV;
- goto unlock;
- }
+ drop_ref(hidraw_table[minor], 0);
list_del(&list->node);
- dev = hidraw_table[minor];
- if (!--dev->open) {
- if (list->hidraw->exist) {
- hid_hw_power(dev->hid, PM_HINT_NORMAL);
- hid_hw_close(dev->hid);
- } else {
- kfree(list->hidraw);
- }
- }
kfree(list);
- ret = 0;
-unlock:
- mutex_unlock(&minors_lock);
-
- return ret;
+ return 0;
}
static long hidraw_ioctl(struct file *file, unsigned int cmd,
@@ -437,19 +421,29 @@ static const struct file_operations hidraw_ops = {
.llseek = noop_llseek,
};
-void hidraw_report_event(struct hid_device *hid, u8 *data, int len)
+int hidraw_report_event(struct hid_device *hid, u8 *data, int len)
{
struct hidraw *dev = hid->hidraw;
struct hidraw_list *list;
+ int ret = 0;
list_for_each_entry(list, &dev->list, node) {
- list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC);
+ int new_head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
+
+ if (new_head == list->tail)
+ continue;
+
+ if (!(list->buffer[list->head].value = kmemdup(data, len, GFP_ATOMIC))) {
+ ret = -ENOMEM;
+ break;
+ }
list->buffer[list->head].len = len;
- list->head = (list->head + 1) & (HIDRAW_BUFFER_SIZE - 1);
+ list->head = new_head;
kill_fasync(&list->fasync, SIGIO, POLL_IN);
}
wake_up_interruptible(&dev->wait);
+ return ret;
}
EXPORT_SYMBOL_GPL(hidraw_report_event);
@@ -512,21 +506,7 @@ EXPORT_SYMBOL_GPL(hidraw_connect);
void hidraw_disconnect(struct hid_device *hid)
{
struct hidraw *hidraw = hid->hidraw;
-
- mutex_lock(&minors_lock);
- hidraw->exist = 0;
-
- device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
-
- hidraw_table[hidraw->minor] = NULL;
-
- if (hidraw->open) {
- hid_hw_close(hid);
- wake_up_interruptible(&hidraw->wait);
- } else {
- kfree(hidraw);
- }
- mutex_unlock(&minors_lock);
+ drop_ref(hidraw, 1);
}
EXPORT_SYMBOL_GPL(hidraw_disconnect);
@@ -542,21 +522,28 @@ int __init hidraw_init(void)
if (result < 0) {
pr_warn("can't get major number\n");
- result = 0;
goto out;
}
hidraw_class = class_create(THIS_MODULE, "hidraw");
if (IS_ERR(hidraw_class)) {
result = PTR_ERR(hidraw_class);
- unregister_chrdev(hidraw_major, "hidraw");
- goto out;
+ goto error_cdev;
}
cdev_init(&hidraw_cdev, &hidraw_ops);
- cdev_add(&hidraw_cdev, dev_id, HIDRAW_MAX_DEVICES);
+ result = cdev_add(&hidraw_cdev, dev_id, HIDRAW_MAX_DEVICES);
+ if (result < 0)
+ goto error_class;
+
out:
return result;
+
+error_class:
+ class_destroy(hidraw_class);
+error_cdev:
+ unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES);
+ goto out;
}
void hidraw_exit(void)
@@ -568,3 +555,23 @@ void hidraw_exit(void)
unregister_chrdev_region(dev_id, HIDRAW_MAX_DEVICES);
}
+
+static void drop_ref(struct hidraw *hidraw, int exists_bit)
+{
+ mutex_lock(&minors_lock);
+ if (exists_bit) {
+ hid_hw_close(hidraw->hid);
+ hidraw->exist = 0;
+ if (hidraw->open)
+ wake_up_interruptible(&hidraw->wait);
+ } else {
+ --hidraw->open;
+ }
+
+ if (!hidraw->open && !hidraw->exist) {
+ device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor));
+ hidraw_table[hidraw->minor] = NULL;
+ kfree(hidraw);
+ }
+ mutex_unlock(&minors_lock);
+}
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index 5d760f3..08e2947 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -96,10 +96,18 @@ static ssize_t ad7314_show_temperature(struct device *dev,
}
}
+static ssize_t ad7314_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, ad7314_show_name, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
ad7314_show_temperature, NULL, 0);
static struct attribute *ad7314_attributes[] = {
+ &dev_attr_name.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
NULL,
};
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index 04450f8..685aae6 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -133,6 +133,12 @@ static ssize_t show_voltage(struct device *dev,
}
}
+static ssize_t ads7871_show_name(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
+}
+
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2);
@@ -142,6 +148,8 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5);
static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6);
static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7);
+static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL);
+
static struct attribute *ads7871_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
@@ -151,6 +159,7 @@ static struct attribute *ads7871_attributes[] = {
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
+ &dev_attr_name.attr,
NULL
};
diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index e8e18ca..ac2d6cb 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -128,12 +128,12 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4)
* counter saturations resulting in bogus power readings.
* We correct this value ourselves to cope with older BIOSes.
*/
-static DEFINE_PCI_DEVICE_TABLE(affected_device) = {
+static const struct pci_device_id affected_device[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{ 0 }
};
-static void __devinit tweak_runavg_range(struct pci_dev *pdev)
+static void tweak_runavg_range(struct pci_dev *pdev)
{
u32 val;
@@ -157,6 +157,16 @@ static void __devinit tweak_runavg_range(struct pci_dev *pdev)
REG_TDP_RUNNING_AVERAGE, val);
}
+#ifdef CONFIG_PM
+static int fam15h_power_resume(struct pci_dev *pdev)
+{
+ tweak_runavg_range(pdev);
+ return 0;
+}
+#else
+#define fam15h_power_resume NULL
+#endif
+
static void __devinit fam15h_power_init_data(struct pci_dev *f4,
struct fam15h_power_data *data)
{
@@ -255,6 +265,7 @@ static struct pci_driver fam15h_power_driver = {
.id_table = fam15h_power_id_table,
.probe = fam15h_power_probe,
.remove = __devexit_p(fam15h_power_remove),
+ .resume = fam15h_power_resume,
};
static int __init fam15h_power_init(void)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index d4ec371..cd1a843 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -335,6 +335,12 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
},
{
.matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"),
+ },
+ },
+ {
+ .matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
},
diff --git a/drivers/iommu/intr_remapping.c b/drivers/iommu/intr_remapping.c
index 6777ca0..73ca321 100644
--- a/drivers/iommu/intr_remapping.c
+++ b/drivers/iommu/intr_remapping.c
@@ -752,6 +752,7 @@ int __init parse_ioapics_under_ir(void)
{
struct dmar_drhd_unit *drhd;
int ir_supported = 0;
+ int ioapic_idx;
for_each_drhd_unit(drhd) {
struct intel_iommu *iommu = drhd->iommu;
@@ -764,13 +765,20 @@ int __init parse_ioapics_under_ir(void)
}
}
- if (ir_supported && ir_ioapic_num != nr_ioapics) {
- printk(KERN_WARNING
- "Not all IO-APIC's listed under remapping hardware\n");
- return -1;
+ if (!ir_supported)
+ return 0;
+
+ for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
+ int ioapic_id = mpc_ioapic_id(ioapic_idx);
+ if (!map_ioapic_to_ir(ioapic_id)) {
+ pr_err(FW_BUG "ioapic %d has no mapping iommu, "
+ "interrupt remapping will be disabled\n",
+ ioapic_id);
+ return -1;
+ }
}
- return ir_supported;
+ return 1;
}
int __init ir_dev_scope_init(void)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 8e91321..52848ab 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1350,17 +1350,25 @@ static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
return q && blk_queue_nonrot(q);
}
-static bool dm_table_is_nonrot(struct dm_table *t)
+static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return q && !blk_queue_add_random(q);
+}
+
+static bool dm_table_all_devices_attribute(struct dm_table *t,
+ iterate_devices_callout_fn func)
{
struct dm_target *ti;
unsigned i = 0;
- /* Ensure that all underlying device are non-rotational. */
while (i < dm_table_get_num_targets(t)) {
ti = dm_table_get_target(t, i++);
if (!ti->type->iterate_devices ||
- !ti->type->iterate_devices(ti, device_is_nonrot, NULL))
+ !ti->type->iterate_devices(ti, func, NULL))
return 0;
}
@@ -1392,7 +1400,8 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
if (!dm_table_discard_zeroes_data(t))
q->limits.discard_zeroes_data = 0;
- if (dm_table_is_nonrot(t))
+ /* Ensure that all underlying devices are non-rotational. */
+ if (dm_table_all_devices_attribute(t, device_is_nonrot))
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
else
queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
@@ -1400,6 +1409,15 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
dm_table_set_integrity(t);
/*
+ * Determine whether or not this queue's I/O timings contribute
+ * to the entropy pool, Only request-based targets use this.
+ * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
+ * have it set.
+ */
+ if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random))
+ queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
+
+ /*
* QUEUE_FLAG_STACKABLE must be set after all queue settings are
* visible to other CPUs because, once the flag is set, incoming bios
* are processed by request-based dm, which refers to the queue
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 4720f68..502dcf7 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -866,10 +866,14 @@ static void dm_done(struct request *clone, int error, bool mapped)
{
int r = error;
struct dm_rq_target_io *tio = clone->end_io_data;
- dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io;
+ dm_request_endio_fn rq_end_io = NULL;
- if (mapped && rq_end_io)
- r = rq_end_io(tio->ti, clone, error, &tio->info);
+ if (tio->ti) {
+ rq_end_io = tio->ti->type->rq_end_io;
+
+ if (mapped && rq_end_io)
+ r = rq_end_io(tio->ti, clone, error, &tio->info);
+ }
if (r <= 0)
/* The target wants to complete the I/O */
@@ -1566,15 +1570,6 @@ static int map_request(struct dm_target *ti, struct request *clone,
int r, requeued = 0;
struct dm_rq_target_io *tio = clone->end_io_data;
- /*
- * Hold the md reference here for the in-flight I/O.
- * We can't rely on the reference count by device opener,
- * because the device may be closed during the request completion
- * when all bios are completed.
- * See the comment in rq_completed() too.
- */
- dm_get(md);
-
tio->ti = ti;
r = ti->type->map_rq(ti, clone, &tio->info);
switch (r) {
@@ -1606,6 +1601,26 @@ static int map_request(struct dm_target *ti, struct request *clone,
return requeued;
}
+static struct request *dm_start_request(struct mapped_device *md, struct request *orig)
+{
+ struct request *clone;
+
+ blk_start_request(orig);
+ clone = orig->special;
+ atomic_inc(&md->pending[rq_data_dir(clone)]);
+
+ /*
+ * Hold the md reference here for the in-flight I/O.
+ * We can't rely on the reference count by device opener,
+ * because the device may be closed during the request completion
+ * when all bios are completed.
+ * See the comment in rq_completed() too.
+ */
+ dm_get(md);
+
+ return clone;
+}
+
/*
* q->request_fn for request-based dm.
* Called with the queue lock held.
@@ -1635,14 +1650,21 @@ static void dm_request_fn(struct request_queue *q)
pos = blk_rq_pos(rq);
ti = dm_table_find_target(map, pos);
- BUG_ON(!dm_target_is_valid(ti));
+ if (!dm_target_is_valid(ti)) {
+ /*
+ * Must perform setup, that dm_done() requires,
+ * before calling dm_kill_unmapped_request
+ */
+ DMERR_LIMIT("request attempted access beyond the end of device");
+ clone = dm_start_request(md, rq);
+ dm_kill_unmapped_request(clone, -EIO);
+ continue;
+ }
if (ti->type->busy && ti->type->busy(ti))
goto delay_and_out;
- blk_start_request(rq);
- clone = rq->special;
- atomic_inc(&md->pending[rq_data_dir(clone)]);
+ clone = dm_start_request(md, rq);
spin_unlock(q->queue_lock);
if (map_request(ti, clone, md))
@@ -1662,8 +1684,6 @@ delay_and_out:
blk_delay_queue(q, HZ / 10);
out:
dm_table_put(map);
-
- return;
}
int dm_underlying_device_busy(struct request_queue *q)
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 7a9eef6..0634ee5 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1226,14 +1226,16 @@ static int enough(struct r10conf *conf, int ignore)
do {
int n = conf->copies;
int cnt = 0;
+ int this = first;
while (n--) {
- if (conf->mirrors[first].rdev &&
- first != ignore)
+ if (conf->mirrors[this].rdev &&
+ this != ignore)
cnt++;
- first = (first+1) % conf->raid_disks;
+ this = (this+1) % conf->raid_disks;
}
if (cnt == 0)
return 0;
+ first = (first + conf->near_copies) % conf->raid_disks;
} while (first != 0);
return 1;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6ce32a7..aaeaff2 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2712,8 +2712,9 @@ int sdhci_add_host(struct sdhci_host *host)
mmc_card_is_removable(mmc))
mmc->caps |= MMC_CAP_NEEDS_POLL;
- /* UHS-I mode(s) supported by the host controller. */
- if (host->version >= SDHCI_SPEC_300)
+ /* Any UHS-I mode in caps implies SDR12 and SDR25 support. */
+ if (caps[1] & (SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 |
+ SDHCI_SUPPORT_DDR50))
mmc->caps |= MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
/* SDR104 supports also implies SDR50 support */
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 32778d5..46194bc 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -1250,7 +1250,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id)
*/
static int ican3_reset_module(struct ican3_dev *mod)
{
- u8 val = 1 << mod->num;
unsigned long start;
u8 runold, runnew;
@@ -1264,8 +1263,7 @@ static int ican3_reset_module(struct ican3_dev *mod)
runold = ioread8(mod->dpm + TARGET_RUNNING);
/* reset the module */
- iowrite8(val, &mod->ctrl->reset_assert);
- iowrite8(val, &mod->ctrl->reset_deassert);
+ iowrite8(0x00, &mod->dpmctrl->hwreset);
/* wait until the module has finished resetting and is running */
start = jiffies;
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 2adc294..79c70ae 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -971,12 +971,12 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct ti_hecc_priv *priv = netdev_priv(ndev);
+ unregister_candev(ndev);
clk_disable(priv->clk);
clk_put(priv->clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iounmap(priv->base);
release_mem_region(res->start, resource_size(res));
- unregister_candev(ndev);
free_candev(ndev);
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 2c1a5c0..4c50ac0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -554,14 +554,16 @@ static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe,
static void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe,
struct bnx2x_fastpath *fp)
{
- /* Do nothing if no IP/L4 csum validation was done */
-
+ /* Do nothing if no L4 csum validation was done.
+ * We do not check whether IP csum was validated. For IPv4 we assume
+ * that if the card got as far as validating the L4 csum, it also
+ * validated the IP csum. IPv6 has no IP csum.
+ */
if (cqe->fast_path_cqe.status_flags &
- (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG |
- ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG))
+ ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)
return;
- /* If both IP/L4 validation were done, check if an error was found. */
+ /* If L4 validation was done, check if an error was found. */
if (cqe->fast_path_cqe.type_error_flags &
(ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG |
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 6b258d9..01bc102 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -14013,9 +14013,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tg3_flag(tp, HW_TSO_1) ||
tg3_flag(tp, HW_TSO_2) ||
tg3_flag(tp, HW_TSO_3) ||
- (tp->fw_needed && !tg3_flag(tp, ENABLE_ASF)))
+ tp->fw_needed) {
+ /* For firmware TSO, assume ASF is disabled.
+ * We'll disable TSO later if we discover ASF
+ * is enabled in tg3_get_eeprom_hw_cfg().
+ */
tg3_flag_set(tp, TSO_CAPABLE);
- else {
+ } else {
tg3_flag_clear(tp, TSO_CAPABLE);
tg3_flag_clear(tp, TSO_BUG);
tp->fw_needed = NULL;
@@ -14290,6 +14294,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
*/
tg3_get_eeprom_hw_cfg(tp);
+ if (tp->fw_needed && tg3_flag(tp, ENABLE_ASF)) {
+ tg3_flag_clear(tp, TSO_CAPABLE);
+ tg3_flag_clear(tp, TSO_BUG);
+ tp->fw_needed = NULL;
+ }
+
if (tg3_flag(tp, ENABLE_APE)) {
/* Allow reads and writes to the
* APE register and memory space.
diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
index 8cf3173..da5204d 100644
--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -1351,6 +1351,10 @@ static void netxen_mask_aer_correctable(struct netxen_adapter *adapter)
struct pci_dev *root = pdev->bus->self;
u32 aer_pos;
+ /* root bus? */
+ if (!root)
+ return;
+
if (adapter->ahw.board_type != NETXEN_BRDTYPE_P3_4_GB_MM &&
adapter->ahw.board_type != NETXEN_BRDTYPE_P3_10G_TP)
return;
diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
index c97d2f5..bfc3b0d 100644
--- a/drivers/net/ethernet/ti/davinci_cpdma.c
+++ b/drivers/net/ethernet/ti/davinci_cpdma.c
@@ -851,6 +851,7 @@ int cpdma_chan_stop(struct cpdma_chan *chan)
next_dma = desc_read(desc, hw_next);
chan->head = desc_from_phys(pool, next_dma);
+ chan->count--;
chan->stats.teardown_dequeue++;
/* issue callback without locks held */
diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c
index bc9a4bb..1161584 100644
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -576,7 +576,7 @@ static int pppoe_release(struct socket *sock)
po = pppox_sk(sk);
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND | PPPOX_ZOMBIE)) {
dev_put(po->pppoe_dev);
po->pppoe_dev = NULL;
}
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index fc147a5..6729585 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1648,6 +1648,10 @@ static const struct usb_device_id products [] = {
USB_DEVICE (0x2001, 0x3c05),
.driver_info = (unsigned long) &ax88772_info,
}, {
+ // DLink DUB-E100 H/W Ver C1
+ USB_DEVICE (0x2001, 0x1a02),
+ .driver_info = (unsigned long) &ax88772_info,
+}, {
// Linksys USB1000
USB_DEVICE (0x1737, 0x0039),
.driver_info = (unsigned long) &ax88178_info,
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index 864448b..e773250 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -678,7 +678,7 @@ static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap)
return -EIO;
}
- *datap = *attrdata;
+ *datap = le16_to_cpu(*attrdata);
kfree(attrdata);
return result;
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index aaaca9a..3f575af 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -10,6 +10,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/cdev.h>
#include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
index 8918261..746202f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -775,8 +775,11 @@ static void brcmf_c_arp_offload_set(struct brcmf_pub *drvr, int arp_mode)
{
char iovbuf[32];
int retcode;
+ __le32 arp_mode_le;
- brcmf_c_mkiovar("arp_ol", (char *)&arp_mode, 4, iovbuf, sizeof(iovbuf));
+ arp_mode_le = cpu_to_le32(arp_mode);
+ brcmf_c_mkiovar("arp_ol", (char *)&arp_mode_le, 4, iovbuf,
+ sizeof(iovbuf));
retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR,
iovbuf, sizeof(iovbuf));
retcode = retcode >= 0 ? 0 : retcode;
@@ -792,8 +795,11 @@ static void brcmf_c_arp_offload_enable(struct brcmf_pub *drvr, int arp_enable)
{
char iovbuf[32];
int retcode;
+ __le32 arp_enable_le;
- brcmf_c_mkiovar("arpoe", (char *)&arp_enable, 4,
+ arp_enable_le = cpu_to_le32(arp_enable);
+
+ brcmf_c_mkiovar("arpoe", (char *)&arp_enable_le, 4,
iovbuf, sizeof(iovbuf));
retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR,
iovbuf, sizeof(iovbuf));
@@ -814,10 +820,10 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
char buf[128], *ptr;
u32 dongle_align = BRCMF_SDALIGN;
u32 glom = 0;
- u32 roaming = 1;
- uint bcn_timeout = 3;
- int scan_assoc_time = 40;
- int scan_unassoc_time = 40;
+ __le32 roaming_le = cpu_to_le32(1);
+ __le32 bcn_timeout_le = cpu_to_le32(3);
+ __le32 scan_assoc_time_le = cpu_to_le32(40);
+ __le32 scan_unassoc_time_le = cpu_to_le32(40);
int i;
brcmf_os_proto_block(drvr);
@@ -852,14 +858,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
/* Setup timeout if Beacons are lost and roam is off to report
link down */
- brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf,
+ brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout_le, 4, iovbuf,
sizeof(iovbuf));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
sizeof(iovbuf));
/* Enable/Disable build-in roaming to allowed ext supplicant to take
of romaing */
- brcmf_c_mkiovar("roam_off", (char *)&roaming, 4,
+ brcmf_c_mkiovar("roam_off", (char *)&roaming_le, 4,
iovbuf, sizeof(iovbuf));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
sizeof(iovbuf));
@@ -874,9 +880,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
sizeof(iovbuf));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_CHANNEL_TIME,
- (char *)&scan_assoc_time, sizeof(scan_assoc_time));
+ (char *)&scan_assoc_time_le, sizeof(scan_assoc_time_le));
brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_UNASSOC_TIME,
- (char *)&scan_unassoc_time, sizeof(scan_unassoc_time));
+ (char *)&scan_unassoc_time_le, sizeof(scan_unassoc_time_le));
/* Set and enable ARP offload feature */
brcmf_c_arp_offload_set(drvr, BRCMF_ARPOL_MODE);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 5eddabe..e4e326a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -498,8 +498,10 @@ static void wl_iscan_prep(struct brcmf_scan_params_le *params_le,
params_le->active_time = cpu_to_le32(-1);
params_le->passive_time = cpu_to_le32(-1);
params_le->home_time = cpu_to_le32(-1);
- if (ssid && ssid->SSID_len)
- memcpy(¶ms_le->ssid_le, ssid, sizeof(struct brcmf_ssid));
+ if (ssid && ssid->SSID_len) {
+ params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len);
+ memcpy(¶ms_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len);
+ }
}
static s32
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
index 9fc804d..7305a47 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
@@ -117,6 +117,7 @@
#define CHIP_VER_B BIT(4)
#define CHIP_92C_BITMASK BIT(0)
+#define CHIP_UNKNOWN BIT(7)
#define CHIP_92C_1T2R 0x03
#define CHIP_92C 0x01
#define CHIP_88C 0x00
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index a3deaef..cb480d8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -1001,8 +1001,16 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw)
version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C :
VERSION_A_CHIP_88C;
} else {
- version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C :
- VERSION_B_CHIP_88C;
+ version = (enum version_8192c) (CHIP_VER_B |
+ ((value32 & TYPE_ID) ? CHIP_92C_BITMASK : 0) |
+ ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0));
+ if ((!IS_CHIP_VENDOR_UMC(version)) && (value32 &
+ CHIP_VER_RTL_MASK)) {
+ version = (enum version_8192c)(version |
+ ((((value32 & CHIP_VER_RTL_MASK) == BIT(12))
+ ? CHIP_VENDOR_UMC_B_CUT : CHIP_UNKNOWN) |
+ CHIP_VENDOR_UMC));
+ }
}
switch (version) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
index f2aa33d..df852e8 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -165,12 +165,14 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
/* request fw */
if (IS_VENDOR_UMC_A_CUT(rtlhal->version) &&
- !IS_92C_SERIAL(rtlhal->version))
+ !IS_92C_SERIAL(rtlhal->version)) {
fw_name = "rtlwifi/rtl8192cfwU.bin";
- else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version))
+ } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {
fw_name = "rtlwifi/rtl8192cfwU_B.bin";
- else
+ pr_info("****** This B_CUT device may not work with kernels 3.6 and earlier\n");
+ } else {
fw_name = rtlpriv->cfg->fw_name;
+ }
err = request_firmware(&firmware, fw_name, rtlpriv->io.dev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 9ddf69e..74d38ca 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -132,6 +132,15 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
+ status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+ if (ACPI_FAILURE(status)) {
+ warn("can't evaluate _ADR (%#x)\n", status);
+ return AE_OK;
+ }
+
+ device = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+
pdev = pbus->self;
if (pdev && pci_is_pcie(pdev)) {
tmp = acpi_find_root_bridge_handle(pdev);
@@ -144,10 +153,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
}
}
- acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
- device = (adr >> 16) & 0xffff;
- function = adr & 0xffff;
-
newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL);
if (!newfunc)
return AE_NO_MEMORY;
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index edaccad..f75a4c8 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -823,9 +823,9 @@ static ssize_t show_infos(struct device *dev,
* The significance of others is yet to be found.
* If we don't find the method, we assume the device are present.
*/
- rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp);
+ rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "HRWS value : %#x\n",
+ len += sprintf(page + len, "HWRS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
@@ -1660,9 +1660,9 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
* The significance of others is yet to be found.
*/
status =
- acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result);
+ acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result);
if (!ACPI_FAILURE(status))
- pr_notice(" HRWS returned %x", (int)hwrs_result);
+ pr_notice(" HWRS returned %x", (int)hwrs_result);
if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
asus->have_rsts = true;
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index 20687d5..a3e98f1 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -462,6 +462,11 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev)
goto out1;
}
+ /* ensure interrupts are disabled, bootloaders can be strange */
+ ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "unable to disable interrupt\n");
+
/* init cached IRQ enable bits */
ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 1ad0b82..1069974 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1264,6 +1264,9 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
int rc = 0;
u64 mask64;
+ memset(&iscsi_init, 0x00, sizeof(struct iscsi_kwqe_init1));
+ memset(&iscsi_init2, 0x00, sizeof(struct iscsi_kwqe_init2));
+
bnx2i_adjust_qp_size(hba);
iscsi_init.flags =
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index b4d2c86..be9aad8 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1213,8 +1213,9 @@ static void complete_scsi_command(struct CommandList *cp)
}
break;
case CMD_PROTOCOL_ERR:
+ cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "cp %p has "
- "protocol error \n", cp);
+ "protocol error\n", cp);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 98cb5e6..17de348 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -1156,6 +1156,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
u16 message_control;
+ /* Check whether controller SAS2008 B0 controller,
+ if it is SAS2008 B0 controller use IO-APIC instead of MSIX */
+ if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 &&
+ ioc->pdev->revision == 0x01) {
+ return -EINVAL;
+ }
+
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 597fb9b..34d114a 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -3039,15 +3039,20 @@ static int transport_generic_cmd_sequencer(
/* Returns CHECK_CONDITION + INVALID_CDB_FIELD */
goto out_invalid_cdb_field;
}
-
+ /*
+ * For the overflow case keep the existing fabric provided
+ * ->data_length. Otherwise for the underflow case, reset
+ * ->data_length to the smaller SCSI expected data transfer
+ * length.
+ */
if (size > cmd->data_length) {
cmd->se_cmd_flags |= SCF_OVERFLOW_BIT;
cmd->residual_count = (size - cmd->data_length);
} else {
cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT;
cmd->residual_count = (cmd->data_length - size);
+ cmd->data_length = size;
}
- cmd->data_length = size;
}
/* reject any command that we don't have a handler for */
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 08b92a6..8d70fbc 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -236,6 +236,9 @@ struct eg20t_port {
int tx_dma_use;
void *rx_buf_virt;
dma_addr_t rx_buf_dma;
+
+ /* protect the eg20t_port private structure and io access to membase */
+ spinlock_t lock;
};
/**
@@ -964,7 +967,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
unsigned int iid;
unsigned long flags;
- spin_lock_irqsave(&priv->port.lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
handled = 0;
while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
switch (iid) {
@@ -1017,7 +1020,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
priv->int_dis_flag = 0;
}
- spin_unlock_irqrestore(&priv->port.lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_RETVAL(handled);
}
@@ -1131,9 +1134,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl)
unsigned long flags;
priv = container_of(port, struct eg20t_port, port);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
pch_uart_hal_set_break(priv, ctl);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
/* Grab any interrupt resources and initialise any low level driver state. */
@@ -1284,7 +1287,8 @@ static void pch_uart_set_termios(struct uart_port *port,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
+ spin_lock(&port->lock);
uart_update_timeout(port, termios->c_cflag, baud);
rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1297,7 +1301,8 @@ static void pch_uart_set_termios(struct uart_port *port,
tty_termios_encode_baud_rate(termios, baud, baud);
out:
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static const char *pch_uart_type(struct uart_port *port)
@@ -1449,6 +1454,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
pci_enable_msi(pdev);
pci_set_master(pdev);
+ spin_lock_init(&priv->lock);
+
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
priv->mapbase = mapbase;
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index d956965..3440812 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -624,7 +624,7 @@ static ssize_t usb_device_read(struct file *file, char __user *buf,
/* print devices for all busses */
list_for_each_entry(bus, &usb_bus_list, bus_list) {
/* recurse through all children of the root hub */
- if (!bus->root_hub)
+ if (!bus_to_hcd(bus)->rh_registered)
continue;
usb_lock_device(bus->root_hub);
ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos,
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 8cb9304..032e5a6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1002,10 +1002,7 @@ static int register_root_hub(struct usb_hcd *hcd)
if (retval) {
dev_err (parent_dev, "can't register root hub for %s, %d\n",
dev_name(&usb_dev->dev), retval);
- }
- mutex_unlock(&usb_bus_list_lock);
-
- if (retval == 0) {
+ } else {
spin_lock_irq (&hcd_root_hub_lock);
hcd->rh_registered = 1;
spin_unlock_irq (&hcd_root_hub_lock);
@@ -1014,6 +1011,7 @@ static int register_root_hub(struct usb_hcd *hcd)
if (HCD_DEAD(hcd))
usb_hc_died (hcd); /* This time clean up */
}
+ mutex_unlock(&usb_bus_list_lock);
return retval;
}
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 527736e..d584eaf 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -2292,10 +2292,8 @@ static int dummy_hcd_probe(struct platform_device *pdev)
hs_hcd->has_tt = 1;
retval = usb_add_hcd(hs_hcd, 0, 0);
- if (retval != 0) {
- usb_put_hcd(hs_hcd);
- return retval;
- }
+ if (retval)
+ goto put_usb2_hcd;
if (mod_data.is_super_speed) {
ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
@@ -2314,6 +2312,8 @@ static int dummy_hcd_probe(struct platform_device *pdev)
put_usb3_hcd:
usb_put_hcd(ss_hcd);
dealloc_usb2_hcd:
+ usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
usb_put_hcd(hs_hcd);
the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 3c166d3..f62be89 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -813,6 +813,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
hpwdt_timer_reg = pci_mem_addr + 0x70;
hpwdt_timer_con = pci_mem_addr + 0x72;
+ /* Make sure that timer is disabled until /dev/watchdog is opened */
+ hpwdt_stop();
+
/* Make sure that we have a valid soft_margin */
if (hpwdt_change_timer(soft_margin))
hpwdt_change_timer(DEFAULT_MARGIN);
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 1b2e180..667776e 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -327,6 +327,6 @@ cifsConvertToUCS(__le16 *target, const char *source, int srclen,
}
ctoUCS_out:
- return i;
+ return j;
}
diff --git a/fs/dcache.c b/fs/dcache.c
index eb723d3..63c0c6b 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -311,7 +311,7 @@ static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent)
* Inform try_to_ascend() that we are no longer attached to the
* dentry tree
*/
- dentry->d_flags |= DCACHE_DISCONNECTED;
+ dentry->d_flags |= DCACHE_DENTRY_KILLED;
if (parent)
spin_unlock(&parent->d_lock);
dentry_iput(dentry);
@@ -968,7 +968,7 @@ static struct dentry *try_to_ascend(struct dentry *old, int locked, unsigned seq
* or deletion
*/
if (new != old->d_parent ||
- (old->d_flags & DCACHE_DISCONNECTED) ||
+ (old->d_flags & DCACHE_DENTRY_KILLED) ||
(!locked && read_seqretry(&rename_lock, seq))) {
spin_unlock(&new->d_lock);
new = NULL;
@@ -1054,6 +1054,8 @@ positive:
return 1;
rename_retry:
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
@@ -1156,6 +1158,8 @@ out:
rename_retry:
if (found)
return found;
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
@@ -2922,6 +2926,8 @@ resume:
return;
rename_retry:
+ if (locked)
+ goto again;
locked = 1;
write_seqlock(&rename_lock);
goto again;
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 53c3bce..0be1aa4 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -123,9 +123,6 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
err = ERR_PTR(-ENOMEM);
inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
- if (h)
- sysctl_head_finish(h);
-
if (!inode)
goto out;
@@ -134,6 +131,8 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
d_add(dentry, inode);
out:
+ if (h)
+ sysctl_head_finish(h);
sysctl_head_finish(head);
return err;
}
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 4eb8c80..1dfe974 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -219,6 +219,8 @@ struct dentry_operations {
#define DCACHE_MANAGED_DENTRY \
(DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT)
+#define DCACHE_DENTRY_KILLED 0x100000
+
extern seqlock_t rename_lock;
static inline int dname_external(struct dentry *dentry)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index c235e4e..331e2ef 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -875,7 +875,7 @@ static inline int hid_hw_power(struct hid_device *hdev, int level)
return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0;
}
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt);
extern int hid_generic_init(void);
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 4b88e69..9cdc9b6 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -76,13 +76,13 @@ struct hidraw_list {
#ifdef CONFIG_HIDRAW
int hidraw_init(void);
void hidraw_exit(void);
-void hidraw_report_event(struct hid_device *, u8 *, int);
+int hidraw_report_event(struct hid_device *, u8 *, int);
int hidraw_connect(struct hid_device *);
void hidraw_disconnect(struct hid_device *);
#else
static inline int hidraw_init(void) { return 0; }
static inline void hidraw_exit(void) { }
-static inline void hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
+static inline int hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
static inline int hidraw_connect(struct hid_device *hid) { return -1; }
static inline void hidraw_disconnect(struct hid_device *hid) { }
#endif
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 935699b..6bea2c2 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -20,7 +20,7 @@
#include <linux/compiler.h>
#include <linux/mutex.h>
-#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS)
+#define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS)
struct memory_block {
unsigned long start_section_nr;
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 22e61fd..28e493b 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -84,6 +84,8 @@ struct xfrm_replay_state {
__u32 bitmap;
};
+#define XFRMA_REPLAY_ESN_MAX 4096
+
struct xfrm_replay_state_esn {
unsigned int bmp_len;
__u32 oseq;
diff --git a/include/net/bluetooth/smp.h b/include/net/bluetooth/smp.h
index 15b97d5..fe810d4 100644
--- a/include/net/bluetooth/smp.h
+++ b/include/net/bluetooth/smp.h
@@ -131,7 +131,7 @@ struct smp_chan {
};
/* SMP Commands */
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level);
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level);
int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb);
int smp_distribute_keys(struct l2cap_conn *conn, __u8 force);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index b203e14..921f627 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -269,6 +269,9 @@ struct xfrm_replay {
int (*check)(struct xfrm_state *x,
struct sk_buff *skb,
__be32 net_seq);
+ int (*recheck)(struct xfrm_state *x,
+ struct sk_buff *skb,
+ __be32 net_seq);
void (*notify)(struct xfrm_state *x, int event);
int (*overflow)(struct xfrm_state *x, struct sk_buff *skb);
};
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index a9c87ad..a9536da 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -214,7 +214,7 @@ TRACE_EVENT(mm_page_alloc,
TP_printk("page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s",
__entry->page,
- page_to_pfn(__entry->page),
+ __entry->page ? page_to_pfn(__entry->page) : 0,
__entry->order,
__entry->migratetype,
show_gfp_flags(__entry->gfp_flags))
@@ -240,7 +240,7 @@ DECLARE_EVENT_CLASS(mm_page,
TP_printk("page=%p pfn=%lu order=%u migratetype=%d percpu_refill=%d",
__entry->page,
- page_to_pfn(__entry->page),
+ __entry->page ? page_to_pfn(__entry->page) : 0,
__entry->order,
__entry->migratetype,
__entry->order == 0)
diff --git a/kernel/async.c b/kernel/async.c
index 80b74b8..009f516 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -88,6 +88,13 @@ static async_cookie_t __lowest_in_progress(struct list_head *running)
{
struct async_entry *entry;
+ if (!running) { /* just check the entry count */
+ if (atomic_read(&entry_count))
+ return 0; /* smaller than any cookie */
+ else
+ return next_cookie;
+ }
+
if (!list_empty(running)) {
entry = list_first_entry(running,
struct async_entry, list);
@@ -238,9 +245,7 @@ EXPORT_SYMBOL_GPL(async_schedule_domain);
*/
void async_synchronize_full(void)
{
- do {
- async_synchronize_cookie(next_cookie);
- } while (!list_empty(&async_running) || !list_empty(&async_pending));
+ async_synchronize_cookie_domain(next_cookie, NULL);
}
EXPORT_SYMBOL_GPL(async_synchronize_full);
@@ -260,7 +265,7 @@ EXPORT_SYMBOL_GPL(async_synchronize_full_domain);
/**
* async_synchronize_cookie_domain - synchronize asynchronous function calls within a certain domain with cookie checkpointing
* @cookie: async_cookie_t to use as checkpoint
- * @running: running list to synchronize on
+ * @running: running list to synchronize on, NULL indicates all lists
*
* This function waits until all asynchronous function calls for the
* synchronization domain specified by the running list @list submitted
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 46a1d3c..84a524b 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2080,6 +2080,9 @@ static void scan_for_empty_cpusets(struct cpuset *root)
* (of no affect) on systems that are actively using CPU hotplug
* but making no active use of cpusets.
*
+ * The only exception to this is suspend/resume, where we don't
+ * modify cpusets at all.
+ *
* This routine ensures that top_cpuset.cpus_allowed tracks
* cpu_active_mask on each CPU hotplug (cpuhp) event.
*
diff --git a/kernel/exit.c b/kernel/exit.c
index 5a8a66e..234e152 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1019,6 +1019,22 @@ NORET_TYPE void do_exit(long code)
preempt_disable();
exit_rcu();
+
+ /*
+ * The setting of TASK_RUNNING by try_to_wake_up() may be delayed
+ * when the following two conditions become true.
+ * - There is race condition of mmap_sem (It is acquired by
+ * exit_mm()), and
+ * - SMI occurs before setting TASK_RUNINNG.
+ * (or hypervisor of virtual machine switches to other guest)
+ * As a result, we may become TASK_RUNNING after becoming TASK_DEAD
+ *
+ * To avoid it, we have to wait for releasing tsk->pi_lock which
+ * is held by try_to_wake_up()
+ */
+ smp_mb();
+ raw_spin_unlock_wait(&tsk->pi_lock);
+
/* causes final put_task_struct in finish_task_switch(). */
tsk->state = TASK_DEAD;
schedule();
diff --git a/kernel/sched.c b/kernel/sched.c
index 910db7d..fcc893f 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -8192,34 +8192,66 @@ int __init sched_create_sysfs_power_savings_entries(struct sysdev_class *cls)
}
#endif /* CONFIG_SCHED_MC || CONFIG_SCHED_SMT */
+static int num_cpus_frozen; /* used to mark begin/end of suspend/resume */
+
/*
* Update cpusets according to cpu_active mask. If cpusets are
* disabled, cpuset_update_active_cpus() becomes a simple wrapper
* around partition_sched_domains().
+ *
+ * If we come here as part of a suspend/resume, don't touch cpusets because we
+ * want to restore it back to its original state upon resume anyway.
*/
static int cpuset_cpu_active(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
+ case CPU_ONLINE_FROZEN:
+ case CPU_DOWN_FAILED_FROZEN:
+
+ /*
+ * num_cpus_frozen tracks how many CPUs are involved in suspend
+ * resume sequence. As long as this is not the last online
+ * operation in the resume sequence, just build a single sched
+ * domain, ignoring cpusets.
+ */
+ num_cpus_frozen--;
+ if (likely(num_cpus_frozen)) {
+ partition_sched_domains(1, NULL, NULL);
+ break;
+ }
+
+ /*
+ * This is the last CPU online operation. So fall through and
+ * restore the original sched domains by considering the
+ * cpuset configurations.
+ */
+
case CPU_ONLINE:
case CPU_DOWN_FAILED:
cpuset_update_active_cpus();
- return NOTIFY_OK;
+ break;
default:
return NOTIFY_DONE;
}
+ return NOTIFY_OK;
}
static int cpuset_cpu_inactive(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
- switch (action & ~CPU_TASKS_FROZEN) {
+ switch (action) {
case CPU_DOWN_PREPARE:
cpuset_update_active_cpus();
- return NOTIFY_OK;
+ break;
+ case CPU_DOWN_PREPARE_FROZEN:
+ num_cpus_frozen++;
+ partition_sched_domains(1, NULL, NULL);
+ break;
default:
return NOTIFY_DONE;
}
+ return NOTIFY_OK;
}
static int update_runtime(struct notifier_block *nfb,
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 979d4de..b413138 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3627,18 +3627,17 @@ static int __devinit workqueue_cpu_down_callback(struct notifier_block *nfb,
#ifdef CONFIG_SMP
struct work_for_cpu {
- struct completion completion;
+ struct work_struct work;
long (*fn)(void *);
void *arg;
long ret;
};
-static int do_work_for_cpu(void *_wfc)
+static void work_for_cpu_fn(struct work_struct *work)
{
- struct work_for_cpu *wfc = _wfc;
+ struct work_for_cpu *wfc = container_of(work, struct work_for_cpu, work);
+
wfc->ret = wfc->fn(wfc->arg);
- complete(&wfc->completion);
- return 0;
}
/**
@@ -3653,19 +3652,11 @@ static int do_work_for_cpu(void *_wfc)
*/
long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
{
- struct task_struct *sub_thread;
- struct work_for_cpu wfc = {
- .completion = COMPLETION_INITIALIZER_ONSTACK(wfc.completion),
- .fn = fn,
- .arg = arg,
- };
+ struct work_for_cpu wfc = { .fn = fn, .arg = arg };
- sub_thread = kthread_create(do_work_for_cpu, &wfc, "work_for_cpu");
- if (IS_ERR(sub_thread))
- return PTR_ERR(sub_thread);
- kthread_bind(sub_thread, cpu);
- wake_up_process(sub_thread);
- wait_for_completion(&wfc.completion);
+ INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn);
+ schedule_work_on(cpu, &wfc.work);
+ flush_work(&wfc.work);
return wfc.ret;
}
EXPORT_SYMBOL_GPL(work_on_cpu);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 6629faf..9ad7d1e 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -127,9 +127,6 @@ static void register_page_bootmem_info_section(unsigned long start_pfn)
struct mem_section *ms;
struct page *page, *memmap;
- if (!pfn_valid(start_pfn))
- return;
-
section_nr = pfn_to_section_nr(start_pfn);
ms = __nr_to_section(section_nr);
@@ -188,9 +185,16 @@ void register_page_bootmem_info_node(struct pglist_data *pgdat)
end_pfn = pfn + pgdat->node_spanned_pages;
/* register_section info */
- for (; pfn < end_pfn; pfn += PAGES_PER_SECTION)
- register_page_bootmem_info_section(pfn);
-
+ for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
+ /*
+ * Some platforms can assign the same pfn to multiple nodes - on
+ * node0 as well as nodeN. To avoid registering a pfn against
+ * multiple nodes we check that this pfn does not already
+ * reside in some other node.
+ */
+ if (pfn_valid(pfn) && (pfn_to_nid(pfn) == node))
+ register_page_bootmem_info_section(pfn);
+ }
}
#endif /* !CONFIG_SPARSEMEM_VMEMMAP */
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6e51bf0..a88dded 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -541,7 +541,7 @@ static inline void __free_one_page(struct page *page,
combined_idx = buddy_idx & page_idx;
higher_page = page + (combined_idx - page_idx);
buddy_idx = __find_buddy_index(combined_idx, order + 1);
- higher_buddy = page + (buddy_idx - combined_idx);
+ higher_buddy = higher_page + (buddy_idx - combined_idx);
if (page_is_buddy(higher_page, higher_buddy, order + 1)) {
list_add_tail(&page->lru,
&zone->free_area[order].free_list[migratetype]);
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index f5ffc02..9ddbd4e 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -106,7 +106,6 @@ static struct sk_buff *vlan_reorder_header(struct sk_buff *skb)
return NULL;
memmove(skb->data - ETH_HLEN, skb->data - VLAN_ETH_HLEN, 2 * ETH_ALEN);
skb->mac_header += VLAN_HLEN;
- skb_reset_mac_len(skb);
return skb;
}
@@ -173,6 +172,8 @@ struct sk_buff *vlan_untag(struct sk_buff *skb)
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
+ skb_reset_mac_len(skb);
+
return skb;
err_free:
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 98bfbd5..1fb1aec 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -44,6 +44,7 @@
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
+#include <net/bluetooth/smp.h>
static void hci_le_connect(struct hci_conn *conn)
{
@@ -641,6 +642,9 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
{
BT_DBG("conn %p", conn);
+ if (conn->type == LE_LINK)
+ return smp_conn_security(conn, sec_level);
+
/* For sdp we don't need the link key. */
if (sec_level == BT_SECURITY_SDP)
return 1;
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index dd76177..04175d9 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -902,14 +902,15 @@ static void l2cap_chan_ready(struct sock *sk)
static void l2cap_conn_ready(struct l2cap_conn *conn)
{
struct l2cap_chan *chan;
+ struct hci_conn *hcon = conn->hcon;
BT_DBG("conn %p", conn);
- if (!conn->hcon->out && conn->hcon->type == LE_LINK)
+ if (!hcon->out && hcon->type == LE_LINK)
l2cap_le_conn_ready(conn);
- if (conn->hcon->out && conn->hcon->type == LE_LINK)
- smp_conn_security(conn, conn->hcon->pending_sec_level);
+ if (hcon->out && hcon->type == LE_LINK)
+ smp_conn_security(hcon, hcon->pending_sec_level);
read_lock(&conn->chan_lock);
@@ -918,8 +919,8 @@ static void l2cap_conn_ready(struct l2cap_conn *conn)
bh_lock_sock(sk);
- if (conn->hcon->type == LE_LINK) {
- if (smp_conn_security(conn, chan->sec_level))
+ if (hcon->type == LE_LINK) {
+ if (smp_conn_security(hcon, chan->sec_level))
l2cap_chan_ready(sk);
} else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) {
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 6dedd6f..158887a 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -616,7 +616,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, ch
break;
}
- if (smp_conn_security(conn, sec.level))
+ if (smp_conn_security(conn->hcon, sec.level))
break;
err = 0;
diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c
index 759b635..c27b4e3 100644
--- a/net/bluetooth/smp.c
+++ b/net/bluetooth/smp.c
@@ -554,9 +554,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb)
return 0;
}
-int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level)
+int smp_conn_security(struct hci_conn *hcon, __u8 sec_level)
{
- struct hci_conn *hcon = conn->hcon;
+ struct l2cap_conn *conn = hcon->l2cap_data;
struct smp_chan *smp = conn->smp_chan;
BT_DBG("conn %p hcon %p level 0x%2.2x", conn, hcon, sec_level);
diff --git a/net/core/dev.c b/net/core/dev.c
index 832ba6d..abe1147 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2108,7 +2108,8 @@ static bool can_checksum_protocol(unsigned long features, __be16 protocol)
static u32 harmonize_features(struct sk_buff *skb, __be16 protocol, u32 features)
{
- if (!can_checksum_protocol(features, protocol)) {
+ if (skb->ip_summed != CHECKSUM_NONE &&
+ !can_checksum_protocol(features, protocol)) {
features &= ~NETIF_F_ALL_CSUM;
features &= ~NETIF_F_SG;
} else if (illegal_highdma(skb->dev, skb)) {
@@ -2686,16 +2687,17 @@ ipv6:
nhoff += poff;
if (pskb_may_pull(skb, nhoff + 4)) {
ports.v32 = * (__force u32 *) (skb->data + nhoff);
- if (ports.v16[1] < ports.v16[0])
- swap(ports.v16[0], ports.v16[1]);
skb->l4_rxhash = 1;
}
}
/* get a consistent hash (same value on both flow directions) */
- if (addr2 < addr1)
+ if (addr2 < addr1 ||
+ (addr2 == addr1 &&
+ ports.v16[1] < ports.v16[0])) {
swap(addr1, addr2);
-
+ swap(ports.v16[0], ports.v16[1]);
+ }
hash = jhash_3words(addr1, addr2, ports.v32, hashrnd);
if (!hash)
hash = 1;
@@ -6387,7 +6389,8 @@ static struct hlist_head *netdev_create_hash(void)
/* Initialize per network namespace state */
static int __net_init netdev_init(struct net *net)
{
- INIT_LIST_HEAD(&net->dev_base_head);
+ if (net != &init_net)
+ INIT_LIST_HEAD(&net->dev_base_head);
net->dev_name_head = netdev_create_hash();
if (net->dev_name_head == NULL)
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 31a5ae5..dd00b71 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -25,7 +25,9 @@ static DEFINE_MUTEX(net_mutex);
LIST_HEAD(net_namespace_list);
EXPORT_SYMBOL_GPL(net_namespace_list);
-struct net init_net;
+struct net init_net = {
+ .dev_base_head = LIST_HEAD_INIT(init_net.dev_base_head),
+};
EXPORT_SYMBOL(init_net);
#define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */
diff --git a/net/core/sock.c b/net/core/sock.c
index 018fd41..1e8a882 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -593,7 +593,8 @@ set_rcvbuf:
case SO_KEEPALIVE:
#ifdef CONFIG_INET
- if (sk->sk_protocol == IPPROTO_TCP)
+ if (sk->sk_protocol == IPPROTO_TCP &&
+ sk->sk_type == SOCK_STREAM)
tcp_set_keepalive(sk, valbool);
#endif
sock_valbool_flag(sk, SOCK_KEEPOPEN, valbool);
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 007e2eb..e1d4f30 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -131,18 +131,20 @@ found:
* 0 - deliver
* 1 - block
*/
-static __inline__ int icmp_filter(struct sock *sk, struct sk_buff *skb)
+static int icmp_filter(const struct sock *sk, const struct sk_buff *skb)
{
- int type;
+ struct icmphdr _hdr;
+ const struct icmphdr *hdr;
- if (!pskb_may_pull(skb, sizeof(struct icmphdr)))
+ hdr = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_hdr), &_hdr);
+ if (!hdr)
return 1;
- type = icmp_hdr(skb)->type;
- if (type < 32) {
+ if (hdr->type < 32) {
__u32 data = raw_sk(sk)->filter.data;
- return ((1 << type) & data) != 0;
+ return ((1U << hdr->type) & data) != 0;
}
/* Do not block unknown ICMP types */
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 043d49b..7397ad8 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1589,8 +1589,14 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
}
#ifdef CONFIG_NET_DMA
- if (tp->ucopy.dma_chan)
- dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+ if (tp->ucopy.dma_chan) {
+ if (tp->rcv_wnd == 0 &&
+ !skb_queue_empty(&sk->sk_async_wait_queue)) {
+ tcp_service_net_dma(sk, true);
+ tcp_cleanup_rbuf(sk, copied);
+ } else
+ dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+ }
#endif
if (copied >= target) {
/* Do not sleep, just process backlog. */
diff --git a/net/ipv6/mip6.c b/net/ipv6/mip6.c
index 43242e6..42853c4 100644
--- a/net/ipv6/mip6.c
+++ b/net/ipv6/mip6.c
@@ -84,28 +84,30 @@ static int mip6_mh_len(int type)
static int mip6_mh_filter(struct sock *sk, struct sk_buff *skb)
{
- struct ip6_mh *mh;
+ struct ip6_mh _hdr;
+ const struct ip6_mh *mh;
- if (!pskb_may_pull(skb, (skb_transport_offset(skb)) + 8) ||
- !pskb_may_pull(skb, (skb_transport_offset(skb) +
- ((skb_transport_header(skb)[1] + 1) << 3))))
+ mh = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_hdr), &_hdr);
+ if (!mh)
return -1;
- mh = (struct ip6_mh *)skb_transport_header(skb);
+ if (((mh->ip6mh_hdrlen + 1) << 3) > skb->len)
+ return -1;
if (mh->ip6mh_hdrlen < mip6_mh_len(mh->ip6mh_type)) {
LIMIT_NETDEBUG(KERN_DEBUG "mip6: MH message too short: %d vs >=%d\n",
mh->ip6mh_hdrlen, mip6_mh_len(mh->ip6mh_type));
- mip6_param_prob(skb, 0, ((&mh->ip6mh_hdrlen) -
- skb_network_header(skb)));
+ mip6_param_prob(skb, 0, offsetof(struct ip6_mh, ip6mh_hdrlen) +
+ skb_network_header_len(skb));
return -1;
}
if (mh->ip6mh_proto != IPPROTO_NONE) {
LIMIT_NETDEBUG(KERN_DEBUG "mip6: MH invalid payload proto = %d\n",
mh->ip6mh_proto);
- mip6_param_prob(skb, 0, ((&mh->ip6mh_proto) -
- skb_network_header(skb)));
+ mip6_param_prob(skb, 0, offsetof(struct ip6_mh, ip6mh_proto) +
+ skb_network_header_len(skb));
return -1;
}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 361ebf3..6e6c2c4 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -107,21 +107,20 @@ found:
* 0 - deliver
* 1 - block
*/
-static __inline__ int icmpv6_filter(struct sock *sk, struct sk_buff *skb)
+static int icmpv6_filter(const struct sock *sk, const struct sk_buff *skb)
{
- struct icmp6hdr *icmph;
- struct raw6_sock *rp = raw6_sk(sk);
-
- if (pskb_may_pull(skb, sizeof(struct icmp6hdr))) {
- __u32 *data = &rp->filter.data[0];
- int bit_nr;
+ struct icmp6hdr *_hdr;
+ const struct icmp6hdr *hdr;
- icmph = (struct icmp6hdr *) skb->data;
- bit_nr = icmph->icmp6_type;
+ hdr = skb_header_pointer(skb, skb_transport_offset(skb),
+ sizeof(_hdr), &_hdr);
+ if (hdr) {
+ const __u32 *data = &raw6_sk(sk)->filter.data[0];
+ unsigned int type = hdr->icmp6_type;
- return (data[bit_nr >> 5] & (1 << (bit_nr & 31))) != 0;
+ return (data[type >> 5] & (1U << (type & 31))) != 0;
}
- return 0;
+ return 1;
}
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 2e21751..488a1b7 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1435,17 +1435,18 @@ static int __ip6_del_rt(struct rt6_info *rt, struct nl_info *info)
struct fib6_table *table;
struct net *net = dev_net(rt->rt6i_dev);
- if (rt == net->ipv6.ip6_null_entry)
- return -ENOENT;
+ if (rt == net->ipv6.ip6_null_entry) {
+ err = -ENOENT;
+ goto out;
+ }
table = rt->rt6i_table;
write_lock_bh(&table->tb6_lock);
-
err = fib6_del(rt, info);
- dst_release(&rt->dst);
-
write_unlock_bh(&table->tb6_lock);
+out:
+ dst_release(&rt->dst);
return err;
}
diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c
index 3c55f63..2cef50b 100644
--- a/net/l2tp/l2tp_eth.c
+++ b/net/l2tp/l2tp_eth.c
@@ -132,7 +132,7 @@ static void l2tp_eth_dev_recv(struct l2tp_session *session, struct sk_buff *skb,
printk("\n");
}
- if (!pskb_may_pull(skb, sizeof(ETH_HLEN)))
+ if (!pskb_may_pull(skb, ETH_HLEN))
goto error;
secpath_reset(skb);
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 732152f..f156382 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -1170,7 +1170,12 @@ static int nr_recvmsg(struct kiocb *iocb, struct socket *sock,
msg->msg_flags |= MSG_TRUNC;
}
- skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ er = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
+ if (er < 0) {
+ skb_free_datagram(sk, skb);
+ release_sock(sk);
+ return er;
+ }
if (sax != NULL) {
sax->sax25_family = AF_NETROM;
diff --git a/net/rds/recv.c b/net/rds/recv.c
index bc3f8cd..fc57d31 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -410,6 +410,8 @@ int rds_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
rdsdebug("size %zu flags 0x%x timeo %ld\n", size, msg_flags, timeo);
+ msg->msg_namelen = 0;
+
if (msg_flags & MSG_OOB)
goto out;
@@ -485,6 +487,7 @@ int rds_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
sin->sin_port = inc->i_hdr.h_sport;
sin->sin_addr.s_addr = inc->i_saddr;
memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
+ msg->msg_namelen = sizeof(*sin);
}
break;
}
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 24d94c0..599f67a 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -250,10 +250,11 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr)
else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL)
cl = defmap[TC_PRIO_BESTEFFORT];
- if (cl == NULL || cl->level >= head->level)
+ if (cl == NULL)
goto fallback;
}
-
+ if (cl->level >= head->level)
+ goto fallback;
#ifdef CONFIG_NET_CLS_ACT
switch (result) {
case TC_ACT_QUEUED:
diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c
index 7b03254..ca0fb48 100644
--- a/net/sched/sch_qfq.c
+++ b/net/sched/sch_qfq.c
@@ -829,7 +829,10 @@ static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl)
if (mask) {
struct qfq_group *next = qfq_ffs(q, mask);
if (qfq_gt(roundedF, next->F)) {
- cl->S = next->F;
+ if (qfq_gt(limit, next->F))
+ cl->S = next->F;
+ else /* preserve timestamp correctness */
+ cl->S = limit;
return;
}
}
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 8fc4dcd..32ba8d0 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -334,6 +334,25 @@ finish:
return retval;
}
+static void sctp_packet_release_owner(struct sk_buff *skb)
+{
+ sk_free(skb->sk);
+}
+
+static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ skb_orphan(skb);
+ skb->sk = sk;
+ skb->destructor = sctp_packet_release_owner;
+
+ /*
+ * The data chunks have already been accounted for in sctp_sendmsg(),
+ * therefore only reserve a single byte to keep socket around until
+ * the packet has been transmitted.
+ */
+ atomic_inc(&sk->sk_wmem_alloc);
+}
+
/* All packets are sent to the network through this function from
* sctp_outq_tail().
*
@@ -375,7 +394,7 @@ int sctp_packet_transmit(struct sctp_packet *packet)
/* Set the owning socket so that we know where to get the
* destination IP address.
*/
- skb_set_owner_w(nskb, sk);
+ sctp_packet_set_owner_w(nskb, sk);
if (!sctp_transport_dst_check(tp)) {
sctp_transport_route(tp, NULL, sctp_sk(sk));
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index d57d05b..fa39731 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -331,6 +331,9 @@ static void reg_regdb_search(struct work_struct *work)
struct reg_regdb_search_request *request;
const struct ieee80211_regdomain *curdom, *regdom;
int i, r;
+ bool set_reg = false;
+
+ mutex_lock(&cfg80211_mutex);
mutex_lock(®_regdb_search_mutex);
while (!list_empty(®_regdb_search_list)) {
@@ -346,9 +349,7 @@ static void reg_regdb_search(struct work_struct *work)
r = reg_copy_regd(®dom, curdom);
if (r)
break;
- mutex_lock(&cfg80211_mutex);
- set_regdom(regdom);
- mutex_unlock(&cfg80211_mutex);
+ set_reg = true;
break;
}
}
@@ -356,6 +357,11 @@ static void reg_regdb_search(struct work_struct *work)
kfree(request);
}
mutex_unlock(®_regdb_search_mutex);
+
+ if (set_reg)
+ set_regdom(regdom);
+
+ mutex_unlock(&cfg80211_mutex);
}
static DECLARE_WORK(reg_regdb_work, reg_regdb_search);
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 54a0dc2..ab2bb42 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -212,7 +212,7 @@ resume:
/* only the first xfrm gets the encap type */
encap_type = 0;
- if (async && x->repl->check(x, skb, seq)) {
+ if (async && x->repl->recheck(x, skb, seq)) {
XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
goto drop_unlock;
}
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 0174034..113d20e 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1761,7 +1761,7 @@ static struct dst_entry *make_blackhole(struct net *net, u16 family,
if (!afinfo) {
dst_release(dst_orig);
- ret = ERR_PTR(-EINVAL);
+ return ERR_PTR(-EINVAL);
} else {
ret = afinfo->blackhole_route(net, dst_orig);
}
diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c
index 2f6d11d..3efb07d 100644
--- a/net/xfrm/xfrm_replay.c
+++ b/net/xfrm/xfrm_replay.c
@@ -420,6 +420,18 @@ err:
return -EINVAL;
}
+static int xfrm_replay_recheck_esn(struct xfrm_state *x,
+ struct sk_buff *skb, __be32 net_seq)
+{
+ if (unlikely(XFRM_SKB_CB(skb)->seq.input.hi !=
+ htonl(xfrm_replay_seqhi(x, net_seq)))) {
+ x->stats.replay_window++;
+ return -EINVAL;
+ }
+
+ return xfrm_replay_check_esn(x, skb, net_seq);
+}
+
static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
{
unsigned int bitnr, nr, i;
@@ -479,6 +491,7 @@ static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq)
static struct xfrm_replay xfrm_replay_legacy = {
.advance = xfrm_replay_advance,
.check = xfrm_replay_check,
+ .recheck = xfrm_replay_check,
.notify = xfrm_replay_notify,
.overflow = xfrm_replay_overflow,
};
@@ -486,6 +499,7 @@ static struct xfrm_replay xfrm_replay_legacy = {
static struct xfrm_replay xfrm_replay_bmp = {
.advance = xfrm_replay_advance_bmp,
.check = xfrm_replay_check_bmp,
+ .recheck = xfrm_replay_check_bmp,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_bmp,
};
@@ -493,6 +507,7 @@ static struct xfrm_replay xfrm_replay_bmp = {
static struct xfrm_replay xfrm_replay_esn = {
.advance = xfrm_replay_advance_esn,
.check = xfrm_replay_check_esn,
+ .recheck = xfrm_replay_recheck_esn,
.notify = xfrm_replay_notify_bmp,
.overflow = xfrm_replay_overflow_esn,
};
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 7cae73e..ede01a8 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -123,9 +123,21 @@ static inline int verify_replay(struct xfrm_usersa_info *p,
struct nlattr **attrs)
{
struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL];
+ struct xfrm_replay_state_esn *rs;
- if ((p->flags & XFRM_STATE_ESN) && !rt)
- return -EINVAL;
+ if (p->flags & XFRM_STATE_ESN) {
+ if (!rt)
+ return -EINVAL;
+
+ rs = nla_data(rt);
+
+ if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8)
+ return -EINVAL;
+
+ if (nla_len(rt) < xfrm_replay_state_esn_len(rs) &&
+ nla_len(rt) != sizeof(*rs))
+ return -EINVAL;
+ }
if (!rt)
return 0;
@@ -370,14 +382,15 @@ static inline int xfrm_replay_verify_len(struct xfrm_replay_state_esn *replay_es
struct nlattr *rp)
{
struct xfrm_replay_state_esn *up;
+ int ulen;
if (!replay_esn || !rp)
return 0;
up = nla_data(rp);
+ ulen = xfrm_replay_state_esn_len(up);
- if (xfrm_replay_state_esn_len(replay_esn) !=
- xfrm_replay_state_esn_len(up))
+ if (nla_len(rp) < ulen || xfrm_replay_state_esn_len(replay_esn) != ulen)
return -EINVAL;
return 0;
@@ -388,22 +401,28 @@ static int xfrm_alloc_replay_state_esn(struct xfrm_replay_state_esn **replay_esn
struct nlattr *rta)
{
struct xfrm_replay_state_esn *p, *pp, *up;
+ int klen, ulen;
if (!rta)
return 0;
up = nla_data(rta);
+ klen = xfrm_replay_state_esn_len(up);
+ ulen = nla_len(rta) >= klen ? klen : sizeof(*up);
- p = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL);
+ p = kzalloc(klen, GFP_KERNEL);
if (!p)
return -ENOMEM;
- pp = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL);
+ pp = kzalloc(klen, GFP_KERNEL);
if (!pp) {
kfree(p);
return -ENOMEM;
}
+ memcpy(p, up, ulen);
+ memcpy(pp, up, ulen);
+
*replay_esn = p;
*preplay_esn = pp;
@@ -442,10 +461,11 @@ static void copy_from_user_state(struct xfrm_state *x, struct xfrm_usersa_info *
* somehow made shareable and move it to xfrm_state.c - JHS
*
*/
-static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs)
+static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs,
+ int update_esn)
{
struct nlattr *rp = attrs[XFRMA_REPLAY_VAL];
- struct nlattr *re = attrs[XFRMA_REPLAY_ESN_VAL];
+ struct nlattr *re = update_esn ? attrs[XFRMA_REPLAY_ESN_VAL] : NULL;
struct nlattr *lt = attrs[XFRMA_LTIME_VAL];
struct nlattr *et = attrs[XFRMA_ETIMER_THRESH];
struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH];
@@ -555,7 +575,7 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
goto error;
/* override default values from above */
- xfrm_update_ae_params(x, attrs);
+ xfrm_update_ae_params(x, attrs, 0);
return x;
@@ -689,6 +709,7 @@ out:
static void copy_to_user_state(struct xfrm_state *x, struct xfrm_usersa_info *p)
{
+ memset(p, 0, sizeof(*p));
memcpy(&p->id, &x->id, sizeof(p->id));
memcpy(&p->sel, &x->sel, sizeof(p->sel));
memcpy(&p->lft, &x->lft, sizeof(p->lft));
@@ -742,7 +763,7 @@ static int copy_to_user_auth(struct xfrm_algo_auth *auth, struct sk_buff *skb)
return -EMSGSIZE;
algo = nla_data(nla);
- strcpy(algo->alg_name, auth->alg_name);
+ strncpy(algo->alg_name, auth->alg_name, sizeof(algo->alg_name));
memcpy(algo->alg_key, auth->alg_key, (auth->alg_key_len + 7) / 8);
algo->alg_key_len = auth->alg_key_len;
@@ -862,6 +883,7 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb,
{
struct xfrm_dump_info info;
struct sk_buff *skb;
+ int err;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!skb)
@@ -872,9 +894,10 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb,
info.nlmsg_seq = seq;
info.nlmsg_flags = 0;
- if (dump_one_state(x, 0, &info)) {
+ err = dump_one_state(x, 0, &info);
+ if (err) {
kfree_skb(skb);
- return NULL;
+ return ERR_PTR(err);
}
return skb;
@@ -1297,6 +1320,7 @@ static void copy_from_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy
static void copy_to_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy_info *p, int dir)
{
+ memset(p, 0, sizeof(*p));
memcpy(&p->sel, &xp->selector, sizeof(p->sel));
memcpy(&p->lft, &xp->lft, sizeof(p->lft));
memcpy(&p->curlft, &xp->curlft, sizeof(p->curlft));
@@ -1401,6 +1425,7 @@ static int copy_to_user_tmpl(struct xfrm_policy *xp, struct sk_buff *skb)
struct xfrm_user_tmpl *up = &vec[i];
struct xfrm_tmpl *kp = &xp->xfrm_vec[i];
+ memset(up, 0, sizeof(*up));
memcpy(&up->id, &kp->id, sizeof(up->id));
up->family = kp->encap_family;
memcpy(&up->saddr, &kp->saddr, sizeof(up->saddr));
@@ -1529,6 +1554,7 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb,
{
struct xfrm_dump_info info;
struct sk_buff *skb;
+ int err;
skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!skb)
@@ -1539,9 +1565,10 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb,
info.nlmsg_seq = seq;
info.nlmsg_flags = 0;
- if (dump_one_policy(xp, dir, 0, &info) < 0) {
+ err = dump_one_policy(xp, dir, 0, &info);
+ if (err) {
kfree_skb(skb);
- return NULL;
+ return ERR_PTR(err);
}
return skb;
@@ -1794,7 +1821,7 @@ static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh,
goto out;
spin_lock_bh(&x->lock);
- xfrm_update_ae_params(x, attrs);
+ xfrm_update_ae_params(x, attrs, 1);
spin_unlock_bh(&x->lock);
c.event = nlh->nlmsg_type;
diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c
index a68b264..a9a593a 100644
--- a/sound/soc/samsung/dma.c
+++ b/sound/soc/samsung/dma.c
@@ -34,9 +34,7 @@ static const struct snd_pcm_hardware dma_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_U16_LE |
SNDRV_PCM_FMTBIT_U8 |
@@ -246,15 +244,11 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd)
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
prtd->state |= ST_RUNNING;
prtd->params->ops->trigger(prtd->params->ch);
break;
case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
prtd->state &= ~ST_RUNNING;
prtd->params->ops->stop(prtd->params->ch);
break;
--
Ben Hutchings
Who are all these weirdos? - David Bowie, about L-Space IRC channel #afp
On Sun, Oct 07, 2012 at 11:59:42PM +0100, Ben Hutchings wrote:
> 3.2-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Jiri Kosina <[email protected]>
>
> commit b6787242f32700377d3da3b8d788ab3928bab849 upstream.
>
> If kmemdup() in hidraw_report_event() fails, we are not propagating
> this fact properly.
>
> Let hidraw_report_event() and hid_report_raw_event() return an error
> value to the caller.
This needs in addition a small fix on top, commit d6d7c87
("HID: fix return value of hidraw_report_event() when !CONFIG_HIDRAW")
--
[]'s
Herton
On Sun, 2012-10-07 at 23:37 +0000, Estevam Fabio-R49496 wrote:
> No, please drop it from 3.2-stable.
>
> This one should only go to 3.5/3.6 stable trees.
>
> Otherwise it will break 3.2-stable.
Thanks, I've dropped this.
Ben.
--
Ben Hutchings
Who are all these weirdos? - David Bowie, about L-Space IRC channel #afp
On Mon, 2012-10-08 at 16:34 -0300, Herton Ronaldo Krzesinski wrote:
> On Sun, Oct 07, 2012 at 11:59:42PM +0100, Ben Hutchings wrote:
> > 3.2-stable review patch. If anyone has any objections, please let me know.
> >
> > ------------------
> >
> > From: Jiri Kosina <[email protected]>
> >
> > commit b6787242f32700377d3da3b8d788ab3928bab849 upstream.
> >
> > If kmemdup() in hidraw_report_event() fails, we are not propagating
> > this fact properly.
> >
> > Let hidraw_report_event() and hid_report_raw_event() return an error
> > value to the caller.
>
> This needs in addition a small fix on top, commit d6d7c87
> ("HID: fix return value of hidraw_report_event() when !CONFIG_HIDRAW")
I've added that, thanks.
Ben.
--
Ben Hutchings
Who are all these weirdos? - David Bowie, about L-Space IRC channel #afp