fixed below checkpatch warnings.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
and add pr_fmt.
Signed-off-by: YAMANE Toshiaki <[email protected]>
---
drivers/staging/media/lirc/lirc_serial.c | 70 +++++++++++++-----------------
1 file changed, 29 insertions(+), 41 deletions(-)
diff --git a/drivers/staging/media/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
index 97ef670..89e2820 100644
--- a/drivers/staging/media/lirc/lirc_serial.c
+++ b/drivers/staging/media/lirc/lirc_serial.c
@@ -48,6 +48,8 @@
* Steve Davies <[email protected]> July 2001
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/signal.h>
@@ -667,8 +669,7 @@ static irqreturn_t irq_handler(int i, void *blah)
counter++;
status = sinp(UART_MSR);
if (counter > RS_ISR_PASS_LIMIT) {
- printk(KERN_WARNING LIRC_DRIVER_NAME ": AIEEEE: "
- "We're caught!\n");
+ pr_warn("AIEEEE: We're caught!\n");
break;
}
if ((status & hardware[type].signal_pin_change)
@@ -703,11 +704,10 @@ static irqreturn_t irq_handler(int i, void *blah)
dcd = (status & hardware[type].signal_pin) ? 1 : 0;
if (dcd == last_dcd) {
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": ignoring spike: %d %d %lx %lx %lx %lx\n",
- dcd, sense,
- tv.tv_sec, lasttv.tv_sec,
- tv.tv_usec, lasttv.tv_usec);
+ pr_warn("ignoring spike: %d %d %lx %lx %lx %lx\n",
+ dcd, sense,
+ tv.tv_sec, lasttv.tv_sec,
+ tv.tv_usec, lasttv.tv_usec);
continue;
}
@@ -715,25 +715,20 @@ static irqreturn_t irq_handler(int i, void *blah)
if (tv.tv_sec < lasttv.tv_sec ||
(tv.tv_sec == lasttv.tv_sec &&
tv.tv_usec < lasttv.tv_usec)) {
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": AIEEEE: your clock just jumped "
- "backwards\n");
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": %d %d %lx %lx %lx %lx\n",
- dcd, sense,
- tv.tv_sec, lasttv.tv_sec,
- tv.tv_usec, lasttv.tv_usec);
+ pr_warn("AIEEEE: your clock just jumped backwards\n");
+ pr_warn("%d %d %lx %lx %lx %lx\n",
+ dcd, sense,
+ tv.tv_sec, lasttv.tv_sec,
+ tv.tv_usec, lasttv.tv_usec);
data = PULSE_MASK;
} else if (deltv > 15) {
data = PULSE_MASK; /* really long time */
if (!(dcd^sense)) {
/* sanity check */
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": AIEEEE: "
- "%d %d %lx %lx %lx %lx\n",
- dcd, sense,
- tv.tv_sec, lasttv.tv_sec,
- tv.tv_usec, lasttv.tv_usec);
+ pr_warn("AIEEEE: %d %d %lx %lx %lx %lx\n",
+ dcd, sense,
+ tv.tv_sec, lasttv.tv_sec,
+ tv.tv_usec, lasttv.tv_usec);
/*
* detecting pulse while this
* MUST be a space!
@@ -776,8 +771,7 @@ static int hardware_init_port(void)
soutp(UART_IER, scratch);
if (scratch2 != 0 || scratch3 != 0x0f) {
/* we fail, there's nothing here */
- printk(KERN_ERR LIRC_DRIVER_NAME ": port existence test "
- "failed, cannot continue\n");
+ pr_err("port existence test failed, cannot continue\n");
return -ENODEV;
}
@@ -850,11 +844,9 @@ static int __devinit lirc_serial_probe(struct platform_device *dev)
LIRC_DRIVER_NAME, (void *)&hardware);
if (result < 0) {
if (result == -EBUSY)
- printk(KERN_ERR LIRC_DRIVER_NAME ": IRQ %d busy\n",
- irq);
+ dev_err(&dev->dev, "IRQ %d busy\n", irq);
else if (result == -EINVAL)
- printk(KERN_ERR LIRC_DRIVER_NAME
- ": Bad irq number or handler\n");
+ dev_err(&dev->dev, "Bad irq number or handler\n");
return result;
}
@@ -869,14 +861,11 @@ static int __devinit lirc_serial_probe(struct platform_device *dev)
LIRC_DRIVER_NAME) == NULL))
|| ((iommap == 0)
&& (request_region(io, 8, LIRC_DRIVER_NAME) == NULL))) {
- printk(KERN_ERR LIRC_DRIVER_NAME
- ": port %04x already in use\n", io);
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": use 'setserial /dev/ttySX uart none'\n");
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": or compile the serial port driver as module and\n");
- printk(KERN_WARNING LIRC_DRIVER_NAME
- ": make sure this module is loaded first\n");
+ dev_err(&dev->dev, "port %04x already in use\n", io);
+ dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n");
+ dev_warn(&dev->dev,
+ "or compile the serial port driver as module and\n");
+ dev_warn(&dev->dev, "make sure this module is loaded first\n");
result = -EBUSY;
goto exit_free_irq;
}
@@ -907,11 +896,11 @@ static int __devinit lirc_serial_probe(struct platform_device *dev)
msleep(40);
}
sense = (nlow >= nhigh ? 1 : 0);
- printk(KERN_INFO LIRC_DRIVER_NAME ": auto-detected active "
- "%s receiver\n", sense ? "low" : "high");
+ dev_info(&dev->dev, "auto-detected active %s receiver\n",
+ sense ? "low" : "high");
} else
- printk(KERN_INFO LIRC_DRIVER_NAME ": Manually using active "
- "%s receiver\n", sense ? "low" : "high");
+ dev_info(&dev->dev, "Manually using active %s receiver\n",
+ sense ? "low" : "high");
dprintk("Interrupt %d, port %04x obtained\n", irq, io);
return 0;
@@ -1247,8 +1236,7 @@ static int __init lirc_serial_init_module(void)
driver.dev = &lirc_serial_dev->dev;
driver.minor = lirc_register_driver(&driver);
if (driver.minor < 0) {
- printk(KERN_ERR LIRC_DRIVER_NAME
- ": register_chrdev failed!\n");
+ pr_err("register_chrdev failed!\n");
lirc_serial_exit();
return driver.minor;
}
--
1.7.9.5