2012-11-12 20:28:53

by Philippe Reynes

Subject: [PATCH v4] Add device tree file for the armadeus apf27

Signed-off-by: Philippe Reynes <[email protected]>
Signed-off-by: Eric Jarrige <[email protected]>
---

v4: update model to use the same format as apf28
remove some empty line
v3: set 26M clock to 0 (not used)
v2: avoid enable again the watchdog

arch/arm/boot/dts/imx27-apf27.dts | 89 +++++++++++++++++++++++++++++++++++++
1 files changed, 89 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/imx27-apf27.dts

diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644
index 0000000..c0327c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2012 Philippe Reynes <[email protected]>
+ * Copyright 2012 Armadeus Systems <[email protected]>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+ model = "Armadeus Systems APF27 module";
+ compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+ memory {
+ reg = <0xa0000000 0x04000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc26m {
+ compatible = "fsl,imx-osc26m", "fixed-clock";
+ clock-frequency = <0>;
+ };
+ };
+
+ soc {
+ aipi@10000000 {
+ serial@1000a000 {
+ status = "okay";
+ };
+
+ ethernet@1002b000 {
+ status = "okay";
+ };
+ };
+
+ nand@d8000000 {
+ status = "okay";
+ nand-bus-width = <16>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x80000>;
+ };
+
+ partition@180000 {
+ label = "env2";
+ reg = <0x180000 0x80000>;
+ };
+
+ partition@200000 {
+ label = "firmware";
+ reg = <0x200000 0x80000>;
+ };
+
+ partition@280000 {
+ label = "dtb";
+ reg = <0x280000 0x80000>;
+ };
+
+ partition@300000 {
+ label = "kernel";
+ reg = <0x300000 0x500000>;
+ };
+
+ partition@800000 {
+ label = "rootfs";
+ reg = <0x800000 0xf800000>;
+ };
+ };
+ };
+};
--
1.7.4.4

2012-11-13 08:52:24

by Sascha Hauer

Subject: Re: [PATCH v4] Add device tree file for the armadeus apf27

On Mon, Nov 12, 2012 at 09:28:33PM +0100, Philippe Reynes wrote:
> Signed-off-by: Philippe Reynes <[email protected]>
> Signed-off-by: Eric Jarrige <[email protected]>
> ---
>
> v4: update model to use the same format as apf28
> remove some empty line
> v3: set 26M clock to 0 (not used)
> v2: avoid enable again the watchdog
>
> arch/arm/boot/dts/imx27-apf27.dts | 89 +++++++++++++++++++++++++++++++++++++
> 1 files changed, 89 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx27-apf27.dts

Applied, thanks

Sascha

>
> diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
> new file mode 100644
> index 0000000..c0327c0
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx27-apf27.dts
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright 2012 Philippe Reynes <[email protected]>
> + * Copyright 2012 Armadeus Systems <[email protected]>
> + *
> + * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "imx27.dtsi"
> +
> +/ {
> + model = "Armadeus Systems APF27 module";
> + compatible = "armadeus,imx27-apf27", "fsl,imx27";
> +
> + memory {
> + reg = <0xa0000000 0x04000000>;
> + };
> +
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + osc26m {
> + compatible = "fsl,imx-osc26m", "fixed-clock";
> + clock-frequency = <0>;
> + };
> + };
> +
> + soc {
> + aipi@10000000 {
> + serial@1000a000 {
> + status = "okay";
> + };
> +
> + ethernet@1002b000 {
> + status = "okay";
> + };
> + };
> +
> + nand@d8000000 {
> + status = "okay";
> + nand-bus-width = <16>;
> + nand-ecc-mode = "hw";
> + nand-on-flash-bbt;
> +
> + partition@0 {
> + label = "u-boot";
> + reg = <0x0 0x100000>;
> + };
> +
> + partition@100000 {
> + label = "env";
> + reg = <0x100000 0x80000>;
> + };
> +
> + partition@180000 {
> + label = "env2";
> + reg = <0x180000 0x80000>;
> + };
> +
> + partition@200000 {
> + label = "firmware";
> + reg = <0x200000 0x80000>;
> + };
> +
> + partition@280000 {
> + label = "dtb";
> + reg = <0x280000 0x80000>;
> + };
> +
> + partition@300000 {
> + label = "kernel";
> + reg = <0x300000 0x500000>;
> + };
> +
> + partition@800000 {
> + label = "rootfs";
> + reg = <0x800000 0xf800000>;
> + };
> + };
> + };
> +};
> --
> 1.7.4.4
>
>

--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |