Add i2c bus number for DVI output.
The driver uses this to detect if a panel is connected and to read EDID.
Signed-off-by: Thomas Weber <[email protected]>
---
arch/arm/mach-omap2/board-devkit8000.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 1fd161e..6f04f0f 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -139,6 +139,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
+ .i2c_bus_num = 1,
};
static struct omap_dss_device devkit8000_dvi_device = {
--
1.8.0