The following errors and warnings fixed.
- ERROR: code indent should use tabs where possible
- WARNING: please, no spaces at the start of a line
- WARNING: please, no space before tabs
Signed-off-by: YAMANE Toshiaki <[email protected]>
---
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c | 372 ++++++++++----------
1 file changed, 186 insertions(+), 186 deletions(-)
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index c7917b2..9185a21 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -41,9 +41,9 @@ static const char *ieee80211_modes[] = {
#define MAX_CUSTOM_LEN 64
static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee,
- char *start, char *stop,
- struct ieee80211_network *network,
- struct iw_request_info *info)
+ char *start, char *stop,
+ struct ieee80211_network *network,
+ struct iw_request_info *info)
{
char custom[MAX_CUSTOM_LEN];
char *p;
@@ -78,9 +78,9 @@ static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee,
snprintf(iwe.u.name, IFNAMSIZ, "IEEE 802.11%s", ieee80211_modes[network->mode]);
start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_CHAR_LEN);
- /* Add mode */
- iwe.cmd = SIOCGIWMODE;
- if (network->capability &
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ if (network->capability &
(WLAN_CAPABILITY_BSS | WLAN_CAPABILITY_IBSS)) {
if (network->capability & WLAN_CAPABILITY_BSS)
iwe.u.mode = IW_MODE_MASTER;
@@ -90,7 +90,7 @@ static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee,
start = iwe_stream_add_event(info, start, stop, &iwe, IW_EV_UINT_LEN);
}
- /* Add frequency/channel */
+ /* Add frequency/channel */
iwe.cmd = SIOCGIWFREQ;
/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
iwe.u.freq.e = 3; */
@@ -168,23 +168,23 @@ static inline char *rtl818x_translate_scan(struct ieee80211_device *ieee,
if (iwe.u.data.length)
start = iwe_stream_add_point(info, start, stop, &iwe, custom);
- memset(&iwe, 0, sizeof(iwe));
- if (network->wpa_ie_len) {
+ memset(&iwe, 0, sizeof(iwe));
+ if (network->wpa_ie_len) {
// printk("wpa_ie_len:%d\n", network->wpa_ie_len);
- char buf[MAX_WPA_IE_LEN];
- memcpy(buf, network->wpa_ie, network->wpa_ie_len);
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = network->wpa_ie_len;
- start = iwe_stream_add_point(info, start, stop, &iwe, buf);
- }
-
- memset(&iwe, 0, sizeof(iwe));
- if (network->rsn_ie_len) {
+ char buf[MAX_WPA_IE_LEN];
+ memcpy(buf, network->wpa_ie, network->wpa_ie_len);
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = network->wpa_ie_len;
+ start = iwe_stream_add_point(info, start, stop, &iwe, buf);
+ }
+
+ memset(&iwe, 0, sizeof(iwe));
+ if (network->rsn_ie_len) {
// printk("=====>rsn_ie_len:\n", network->rsn_ie_len);
- char buf[MAX_WPA_IE_LEN];
- memcpy(buf, network->rsn_ie, network->rsn_ie_len);
- iwe.cmd = IWEVGENIE;
- iwe.u.data.length = network->rsn_ie_len;
+ char buf[MAX_WPA_IE_LEN];
+ memcpy(buf, network->rsn_ie, network->rsn_ie_len);
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = network->rsn_ie_len;
start = iwe_stream_add_point(info, start, stop, &iwe, buf);
}
@@ -359,7 +359,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
key, escape_essid(sec.keys[key], len),
erq->length, len);
sec.key_sizes[key] = len;
- (*crypt)->ops->set_key(sec.keys[key], len, NULL,
+ (*crypt)->ops->set_key(sec.keys[key], len, NULL,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
@@ -472,218 +472,218 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
}
int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
struct net_device *dev = ieee->dev;
- struct iw_point *encoding = &wrqu->encoding;
- struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int i, idx, ret = 0;
- int group_key = 0;
- const char *alg;
- struct ieee80211_crypto_ops *ops;
- struct ieee80211_crypt_data **crypt;
-
- struct ieee80211_security sec = {
- .flags = 0,
- };
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int i, idx, ret = 0;
+ int group_key = 0;
+ const char *alg;
+ struct ieee80211_crypto_ops *ops;
+ struct ieee80211_crypt_data **crypt;
+
+ struct ieee80211_security sec = {
+ .flags = 0,
+ };
//printk("======>encoding flag:%x,ext flag:%x, ext alg:%d\n", encoding->flags,ext->ext_flags, ext->alg);
- idx = encoding->flags & IW_ENCODE_INDEX;
- if (idx) {
- if (idx < 1 || idx > WEP_KEYS)
- return -EINVAL;
- idx--;
- } else
- idx = ieee->tx_keyidx;
-
- if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
- crypt = &ieee->crypt[idx];
- group_key = 1;
- } else {
- /* some Cisco APs use idx>0 for unicast in dynamic WEP */
+ idx = encoding->flags & IW_ENCODE_INDEX;
+ if (idx) {
+ if (idx < 1 || idx > WEP_KEYS)
+ return -EINVAL;
+ idx--;
+ } else
+ idx = ieee->tx_keyidx;
+
+ if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+ crypt = &ieee->crypt[idx];
+ group_key = 1;
+ } else {
+ /* some Cisco APs use idx>0 for unicast in dynamic WEP */
//printk("not group key, flags:%x, ext->alg:%d\n", ext->ext_flags, ext->alg);
- if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
- return -EINVAL;
- if (ieee->iw_mode == IW_MODE_INFRA)
- crypt = &ieee->crypt[idx];
- else
- return -EINVAL;
- }
-
- sec.flags |= SEC_ENABLED;// | SEC_ENCRYPT;
- if ((encoding->flags & IW_ENCODE_DISABLED) ||
- ext->alg == IW_ENCODE_ALG_NONE) {
- if (*crypt)
- ieee80211_crypt_delayed_deinit(ieee, crypt);
-
- for (i = 0; i < WEP_KEYS; i++)
- if (ieee->crypt[i] != NULL)
- break;
-
- if (i == WEP_KEYS) {
- sec.enabled = 0;
- // sec.encrypt = 0;
- sec.level = SEC_LEVEL_0;
- sec.flags |= SEC_LEVEL;
- }
+ if (idx != 0 && ext->alg != IW_ENCODE_ALG_WEP)
+ return -EINVAL;
+ if (ieee->iw_mode == IW_MODE_INFRA)
+ crypt = &ieee->crypt[idx];
+ else
+ return -EINVAL;
+ }
+
+ sec.flags |= SEC_ENABLED;// | SEC_ENCRYPT;
+ if ((encoding->flags & IW_ENCODE_DISABLED) ||
+ ext->alg == IW_ENCODE_ALG_NONE) {
+ if (*crypt)
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ for (i = 0; i < WEP_KEYS; i++)
+ if (ieee->crypt[i] != NULL)
+ break;
+
+ if (i == WEP_KEYS) {
+ sec.enabled = 0;
+ // sec.encrypt = 0;
+ sec.level = SEC_LEVEL_0;
+ sec.flags |= SEC_LEVEL;
+ }
//printk("disabled: flag:%x\n", encoding->flags);
- goto done;
- }
+ goto done;
+ }
sec.enabled = 1;
// sec.encrypt = 1;
- switch (ext->alg) {
- case IW_ENCODE_ALG_WEP:
- alg = "WEP";
- break;
- case IW_ENCODE_ALG_TKIP:
- alg = "TKIP";
- break;
- case IW_ENCODE_ALG_CCMP:
- alg = "CCMP";
- break;
- default:
- IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
- dev->name, ext->alg);
- ret = -EINVAL;
- goto done;
- }
+ switch (ext->alg) {
+ case IW_ENCODE_ALG_WEP:
+ alg = "WEP";
+ break;
+ case IW_ENCODE_ALG_TKIP:
+ alg = "TKIP";
+ break;
+ case IW_ENCODE_ALG_CCMP:
+ alg = "CCMP";
+ break;
+ default:
+ IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ dev->name, ext->alg);
+ ret = -EINVAL;
+ goto done;
+ }
// printk("8-09-08-9=====>%s, alg name:%s\n",__func__, alg);
- ops = ieee80211_get_crypto_ops(alg);
- if (ops == NULL)
- ops = ieee80211_get_crypto_ops(alg);
- if (ops == NULL) {
- IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
- dev->name, ext->alg);
+ ops = ieee80211_get_crypto_ops(alg);
+ if (ops == NULL)
+ ops = ieee80211_get_crypto_ops(alg);
+ if (ops == NULL) {
+ IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
+ dev->name, ext->alg);
printk("========>unknown crypto alg %d\n", ext->alg);
- ret = -EINVAL;
- goto done;
- }
-
- if (*crypt == NULL || (*crypt)->ops != ops) {
- struct ieee80211_crypt_data *new_crypt;
-
- ieee80211_crypt_delayed_deinit(ieee, crypt);
-
- new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
- if (new_crypt == NULL) {
- ret = -ENOMEM;
- goto done;
- }
- new_crypt->ops = ops;
- if (new_crypt->ops)
- new_crypt->priv = new_crypt->ops->init(idx);
- if (new_crypt->priv == NULL) {
- kfree(new_crypt);
- ret = -EINVAL;
- goto done;
- }
- *crypt = new_crypt;
-
- }
-
- if (ext->key_len > 0 && (*crypt)->ops->set_key &&
- (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
- (*crypt)->priv) < 0) {
- IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (*crypt == NULL || (*crypt)->ops != ops) {
+ struct ieee80211_crypt_data *new_crypt;
+
+ ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+ new_crypt = kzalloc(sizeof(*new_crypt), GFP_KERNEL);
+ if (new_crypt == NULL) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ new_crypt->ops = ops;
+ if (new_crypt->ops)
+ new_crypt->priv = new_crypt->ops->init(idx);
+ if (new_crypt->priv == NULL) {
+ kfree(new_crypt);
+ ret = -EINVAL;
+ goto done;
+ }
+ *crypt = new_crypt;
+
+ }
+
+ if (ext->key_len > 0 && (*crypt)->ops->set_key &&
+ (*crypt)->ops->set_key(ext->key, ext->key_len, ext->rx_seq,
+ (*crypt)->priv) < 0) {
+ IEEE80211_DEBUG_WX("%s: key setting failed\n", dev->name);
printk("key setting failed\n");
- ret = -EINVAL;
- goto done;
- }
+ ret = -EINVAL;
+ goto done;
+ }
#if 1
//skip_host_crypt:
//printk("skip_host_crypt:ext_flags:%x\n", ext->ext_flags);
- if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
- ieee->tx_keyidx = idx;
- sec.active_key = idx;
- sec.flags |= SEC_ACTIVE_KEY;
- }
-
- if (ext->alg != IW_ENCODE_ALG_NONE) {
- memcpy(sec.keys[idx], ext->key, ext->key_len);
- sec.key_sizes[idx] = ext->key_len;
- sec.flags |= (1 << idx);
- if (ext->alg == IW_ENCODE_ALG_WEP) {
- // sec.encode_alg[idx] = SEC_ALG_WEP;
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_1;
- } else if (ext->alg == IW_ENCODE_ALG_TKIP) {
- // sec.encode_alg[idx] = SEC_ALG_TKIP;
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_2;
- } else if (ext->alg == IW_ENCODE_ALG_CCMP) {
- // sec.encode_alg[idx] = SEC_ALG_CCMP;
- sec.flags |= SEC_LEVEL;
- sec.level = SEC_LEVEL_3;
- }
- /* Don't set sec level for group keys. */
- if (group_key)
- sec.flags &= ~SEC_LEVEL;
- }
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ ieee->tx_keyidx = idx;
+ sec.active_key = idx;
+ sec.flags |= SEC_ACTIVE_KEY;
+ }
+
+ if (ext->alg != IW_ENCODE_ALG_NONE) {
+ memcpy(sec.keys[idx], ext->key, ext->key_len);
+ sec.key_sizes[idx] = ext->key_len;
+ sec.flags |= (1 << idx);
+ if (ext->alg == IW_ENCODE_ALG_WEP) {
+ // sec.encode_alg[idx] = SEC_ALG_WEP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_1;
+ } else if (ext->alg == IW_ENCODE_ALG_TKIP) {
+ // sec.encode_alg[idx] = SEC_ALG_TKIP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_2;
+ } else if (ext->alg == IW_ENCODE_ALG_CCMP) {
+ // sec.encode_alg[idx] = SEC_ALG_CCMP;
+ sec.flags |= SEC_LEVEL;
+ sec.level = SEC_LEVEL_3;
+ }
+ /* Don't set sec level for group keys. */
+ if (group_key)
+ sec.flags &= ~SEC_LEVEL;
+ }
#endif
done:
- if (ieee->set_security)
- ieee->set_security(ieee->dev, &sec);
+ if (ieee->set_security)
+ ieee->set_security(ieee->dev, &sec);
if (ieee->reset_on_keychange &&
- ieee->iw_mode != IW_MODE_INFRA &&
- ieee->reset_port && ieee->reset_port(dev)) {
- IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
- return -EINVAL;
- }
+ ieee->iw_mode != IW_MODE_INFRA &&
+ ieee->reset_port && ieee->reset_port(dev)) {
+ IEEE80211_DEBUG_WX("%s: reset_port failed\n", dev->name);
+ return -EINVAL;
+ }
- return ret;
+ return ret;
}
int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
{
struct iw_mlme *mlme = (struct iw_mlme *) extra;
// printk("\ndkgadfslkdjgalskdf===============>%s(), cmd:%x\n", __func__, mlme->cmd);
#if 1
switch (mlme->cmd) {
- case IW_MLME_DEAUTH:
+ case IW_MLME_DEAUTH:
case IW_MLME_DISASSOC:
// printk("disassoc now\n");
ieee80211_disassociate(ieee);
break;
default:
- return -EOPNOTSUPP;
- }
+ return -EOPNOTSUPP;
+ }
#endif
return 0;
}
int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
- struct iw_request_info *info,
- struct iw_param *data, char *extra)
+ struct iw_request_info *info,
+ struct iw_param *data, char *extra)
{
/*
struct ieee80211_security sec = {
- .flags = SEC_AUTH_MODE,
+ .flags = SEC_AUTH_MODE,
}
*/
//printk("set auth:flag:%x, data value:%x\n", data->flags, data->value);
switch (data->flags & IW_AUTH_INDEX) {
- case IW_AUTH_WPA_VERSION:
+ case IW_AUTH_WPA_VERSION:
/*need to support wpa2 here*/
//printk("wpa version:%x\n", data->value);
break;
- case IW_AUTH_CIPHER_PAIRWISE:
- case IW_AUTH_CIPHER_GROUP:
- case IW_AUTH_KEY_MGMT:
- /*
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ case IW_AUTH_KEY_MGMT:
+ /*
* * Host AP driver does not use these parameters and allows
* * wpa_supplicant to control them internally.
* */
- break;
- case IW_AUTH_TKIP_COUNTERMEASURES:
- ieee->tkip_countermeasures = data->value;
- break;
- case IW_AUTH_DROP_UNENCRYPTED:
- ieee->drop_unencrypted = data->value;
+ break;
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ ieee->tkip_countermeasures = data->value;
+ break;
+ case IW_AUTH_DROP_UNENCRYPTED:
+ ieee->drop_unencrypted = data->value;
break;
case IW_AUTH_80211_AUTH_ALG:
@@ -699,13 +699,13 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
#endif
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
- ieee->ieee802_1x = data->value;
+ ieee->ieee802_1x = data->value;
break;
case IW_AUTH_PRIVACY_INVOKED:
ieee->privacy_invoked = data->value;
break;
default:
- return -EOPNOTSUPP;
+ return -EOPNOTSUPP;
}
return 0;
}
--
1.7.9.5
The following errors fixed.
-ERROR: that open brace { should be on the previous line
-ERROR: space required before the open parenthesis '('
-ERROR: else should follow close brace '}'
-ERROR: space required before the open brace '{'
Signed-off-by: YAMANE Toshiaki <[email protected]>
---
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c | 25 +++++++-------------
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index 9185a21..e37555b 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -217,22 +217,18 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
down(&ieee->wx_sem);
spin_lock_irqsave(&ieee->lock, flags);
- if(!ieee->bHwRadioOff)
- {
+ if (!ieee->bHwRadioOff) {
list_for_each_entry(network, &ieee->network_list, list) {
i++;
- if((stop-ev)<200)
- {
+ if ((stop-ev)<200) {
err = -E2BIG;
break;
}
if (ieee->scan_age == 0 ||
- time_after(network->last_scanned + ieee->scan_age, jiffies))
- {
+ time_after(network->last_scanned + ieee->scan_age, jiffies)) {
ev = rtl818x_translate_scan(ieee, ev, stop, network, info);
- }
- else
+ } else
IEEE80211_DEBUG_SCAN(
"Not showing network '%s ("
"%pM)' due to age (%lums).\n",
@@ -430,7 +426,7 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
IEEE80211_DEBUG_WX("GET_ENCODE\n");
- if(ieee->iw_mode == IW_MODE_MONITOR)
+ if (ieee->iw_mode == IW_MODE_MONITOR)
return -1;
key = erq->flags & IW_ENCODE_INDEX;
@@ -715,15 +711,13 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
{
u8 *buf = NULL;
- if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
- {
+ if (len>MAX_WPA_IE_LEN || (len && ie == NULL)) {
printk("return error out, len:%zu\n", len);
return -EINVAL;
}
- if (len)
- {
- if (len != ie[1]+2){
+ if (len) {
+ if (len != ie[1]+2) {
printk("len:%zu, ie:%d\n", len, ie[1]);
return -EINVAL;
}
@@ -733,8 +727,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
kfree(ieee->wpa_ie);
ieee->wpa_ie = buf;
ieee->wpa_ie_len = len;
- }
- else{
+ } else {
kfree(ieee->wpa_ie);
ieee->wpa_ie = NULL;
ieee->wpa_ie_len = 0;
--
1.7.9.5
The following errors fixed.
-ERROR: spaces required around that '<' (ctx:VxV)
-ERROR: spaces required around that '?' (ctx:VxV)
-ERROR: spaces required around that ':' (ctx:VxV)
-ERROR: spaces required around that '>' (ctx:VxV)
Signed-off-by: YAMANE Toshiaki <[email protected]>
---
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index e37555b..9d46087 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -221,7 +221,7 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
list_for_each_entry(network, &ieee->network_list, list) {
i++;
- if ((stop-ev)<200) {
+ if ((stop-ev) < 200) {
err = -E2BIG;
break;
}
@@ -683,13 +683,13 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
break;
case IW_AUTH_80211_AUTH_ALG:
- ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM)?1:0;
+ ieee->open_wep = (data->value&IW_AUTH_ALG_OPEN_SYSTEM) ? 1 : 0;
//printk("open_wep:%d\n", ieee->open_wep);
break;
#if 1
case IW_AUTH_WPA_ENABLED:
- ieee->wpa_enabled = (data->value)?1:0;
+ ieee->wpa_enabled = (data->value) ? 1 : 0;
//printk("enable wpa:%d\n", ieee->wpa_enabled);
break;
@@ -711,7 +711,7 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
{
u8 *buf = NULL;
- if (len>MAX_WPA_IE_LEN || (len && ie == NULL)) {
+ if (len > MAX_WPA_IE_LEN || (len && ie == NULL)) {
printk("return error out, len:%zu\n", len);
return -EINVAL;
}
--
1.7.9.5
The following warnings fixed.
-WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
-WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ...
Signed-off-by: YAMANE Toshiaki <[email protected]>
---
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
index 9d46087..e014f7e 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
@@ -336,9 +336,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
kfree(new_crypt);
new_crypt = NULL;
- printk(KERN_WARNING "%s: could not initialize WEP: "
- "load module ieee80211_crypt_wep\n",
- dev->name);
+ netdev_warn(ieee->dev,
+ "could not initialize WEP: load module ieee80211_crypt_wep\n");
return -EOPNOTSUPP;
}
*crypt = new_crypt;
@@ -410,7 +409,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port && ieee->reset_port(dev)) {
- printk(KERN_DEBUG "%s: reset_port failed\n", dev->name);
+ netdev_dbg(ieee->dev, "reset_port failed\n");
return -EINVAL;
}
return 0;
--
1.7.9.5