I guess somebody noticed the kernel was too user friendly so you people
have "improved" the kernel again.
The in good old days kernel messages said things like /dev/sda bla bla
Now I get :
[ 4706.176816] ata10: exception Emask 0x10 SAct 0x0 SErr 0x910000 action 0xe frozen
[ 4706.176827] ata9: exception Emask 0x10 SAct 0x0 SErr 0x990000 action 0xe frozen
[ 4706.176833] ata9: irq_stat 0x00400000, PHY RDY changed
[ 4706.176839] ata9: SError: { PHYRdyChg 10B8B Dispar LinkSeq }
[ 4706.176850] ata9: hard resetting link
[ 4706.193481] ata10: irq_stat 0x00400000, PHY RDY changed
[ 4706.197875] ata10: SError: { PHYRdyChg Dispar LinkSeq }
[ 4706.202104] ata10: hard resetting link
[ 4711.288030] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4711.289538] ata10.00: configured for UDMA/133
[ 4711.289547] ata10: EH complete
[ 4711.320032] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4711.323494] ata9.00: configured for UDMA/33
[ 4711.323503] ata9: EH complete
[ 4775.368201] ata9: exception Emask 0x10 SAct 0x0 SErr 0x990000 action 0xe frozen
[ 4775.372501] ata9: irq_stat 0x00400000, PHY RDY changed
[ 4775.376792] ata9: SError: { PHYRdyChg 10B8B Dispar LinkSeq }
[ 4775.380948] ata9: hard resetting link
[ 4780.524032] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4780.536659] ata9.00: configured for UDMA/33
[ 4780.536667] ata9: EH complete
With these disks.
root@mail:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sdd1 226G 3.9G 211G 2% /
tmpfs 1009M 0 1009M 0% /lib/init/rw
udev 1004M 212K 1004M 1% /dev
tmpfs 1009M 0 1009M 0% /dev/shm
/dev/sde1 688G 336G 318G 52% /disks/vol1
/dev/sdf 2.7T 1.7T 879G 67% /disks/vol2
/dev/sdg 2.7T 1.8T 802G 70% /disks/vol3
/dev/sdb 2.7T 112G 2.5T 5% /disks/vol4
/dev/sdc1 1.4T 1.3T 2.4G 100% /disks/vol5
/dev/sda1 1.4T 1.2T 154G 89% /disks/vol6
Why when the kernel has the ATA=/dev/sdX can it not just tell the fucking users !