2013-04-02 00:40:00

by Axel Lin

[permalink] [raw]
Subject: [PATCH RFT] regulator: ab8500: Fix build error

This patch removes 'delay' field which does not exist in struct
ab8500_regulator_info. ( The 'delay' field was removed because fixed regulator
does not need to implement set_voltage_time_sel. )
Fix missing semicolon and declare match_size to fix below build error.
Also setup match pointer and match_size for ab8505 and ab8540.

CC drivers/regulator/ab8500.o
drivers/regulator/ab8500.c:825:3: error: unknown field 'delay' specified in initializer
drivers/regulator/ab8500.c:825:3: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/regulator/ab8500.c:825:3: warning: (near initialization for 'ab8505_regulator_info[7].regulator') [enabled by default]
drivers/regulator/ab8500.c:1067:3: error: unknown field 'delay' specified in initializer
drivers/regulator/ab8500.c:1067:3: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/regulator/ab8500.c:1067:3: warning: (near initialization for 'ab9540_regulator_info[5].regulator') [enabled by default]
drivers/regulator/ab8500.c:1309:3: error: unknown field 'delay' specified in initializer
drivers/regulator/ab8500.c:1309:3: warning: initialization makes pointer from integer without a cast [enabled by default]
drivers/regulator/ab8500.c:1309:3: warning: (near initialization for 'ab8540_regulator_info[5].regulator') [enabled by default]
drivers/regulator/ab8500.c: In function 'ab8500_regulator_probe':
drivers/regulator/ab8500.c:2703:3: error: 'match_size' undeclared (first use in this function)
drivers/regulator/ab8500.c:2703:3: note: each undeclared identifier is reported only once for each function it appears in
drivers/regulator/ab8500.c:2704:2: error: expected ';' before '}' token
drivers/regulator/ab8500.c:2721:2: error: expected ';' before '}' token
drivers/regulator/ab8500.c:2747:8: warning: assignment from incompatible pointer type [enabled by default]
drivers/regulator/ab8500.c: At top level:
drivers/regulator/ab8500.c:2619:34: warning: 'ab8505_regulator_match' defined but not used [-Wunused-variable]
drivers/regulator/ab8500.c:2635:34: warning: 'ab8540_regulator_match' defined but not used [-Wunused-variable]
make[2]: *** [drivers/regulator/ab8500.o] Error 1
make[1]: *** [drivers/regulator] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin <[email protected]>
---
drivers/regulator/ab8500.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 16f5cf7..09eea32 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -822,7 +822,6 @@ static struct ab8500_regulator_info
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1064,7 +1063,6 @@ static struct ab8500_regulator_info
.n_voltages = 1,
.volt_table = fixed_2000000_voltage,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -1306,7 +1304,6 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
@@ -2692,7 +2689,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
struct ab8500_regulator_info *regulator_info;
int regulator_info_size;
struct ab8500_reg_init *reg_init;
- int reg_init_size;
+ int reg_init_size, match_size;

if (is_ab9540(ab8500)) {
regulator_info = ab9540_regulator_info;
@@ -2700,24 +2697,28 @@ static int ab8500_regulator_probe(struct platform_device *pdev)
reg_init = ab9540_reg_init;
reg_init_size = AB9540_NUM_REGULATOR_REGISTERS;
match = ab9540_regulator_match;
- match_size = ARRAY_SIZE(ab9540_regulator_match)
+ match_size = ARRAY_SIZE(ab9540_regulator_match);
} else if (is_ab8505(ab8500)) {
regulator_info = ab8505_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8505_regulator_info);
reg_init = ab8505_reg_init;
reg_init_size = AB8505_NUM_REGULATOR_REGISTERS;
+ match = ab8505_regulator_match;
+ match_size = ARRAY_SIZE(ab8505_regulator_match);
} else if (is_ab8540(ab8500)) {
regulator_info = ab8540_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8540_regulator_info);
reg_init = ab8540_reg_init;
reg_init_size = AB8540_NUM_REGULATOR_REGISTERS;
+ match = ab8540_regulator_match;
+ match_size = ARRAY_SIZE(ab8540_regulator_match);
} else {
regulator_info = ab8500_regulator_info;
regulator_info_size = ARRAY_SIZE(ab8500_regulator_info);
reg_init = ab8500_reg_init;
reg_init_size = AB8500_NUM_REGULATOR_REGISTERS;
match = ab8500_regulator_match;
- match_size = ARRAY_SIZE(ab8500_regulator_match)
+ match_size = ARRAY_SIZE(ab8500_regulator_match);
}

if (np) {
--
1.7.10.4



2013-04-02 11:26:42

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH RFT] regulator: ab8500: Fix build error

On Tue, Apr 02, 2013 at 08:39:53AM +0800, Axel Lin wrote:
> This patch removes 'delay' field which does not exist in struct
> ab8500_regulator_info. ( The 'delay' field was removed because fixed regulator
> does not need to implement set_voltage_time_sel. )
> Fix missing semicolon and declare match_size to fix below build error.
> Also setup match pointer and match_size for ab8505 and ab8540.

Lee?


Attachments:
(No filename) (402.00 B)
signature.asc (836.00 B)
Digital signature
Download all attachments

2013-04-03 02:30:24

by Axel Lin

[permalink] [raw]
Subject: Re: [PATCH RFT] regulator: ab8500: Fix build error

2013/4/2 Mark Brown <[email protected]>:
> On Tue, Apr 02, 2013 at 08:39:53AM +0800, Axel Lin wrote:
>> This patch removes 'delay' field which does not exist in struct
>> ab8500_regulator_info. ( The 'delay' field was removed because fixed regulator
>> does not need to implement set_voltage_time_sel. )
>> Fix missing semicolon and declare match_size to fix below build error.
>> Also setup match pointer and match_size for ab8505 and ab8540.
>
> Lee?

Hi,
This patch does not apply to regulator tree now.
I'm sending another patch serial to fix build error.

Regards,
Axel