From: David Daney <[email protected]>
The Octeon SMI/MDIO interfaces can do clause 45 communications, so
implement this in the driver.
Also fix some comment formatting to make it consistent and to comply
with the netdev style.
Signed-off-by: David Daney <[email protected]>
---
v3: Remove now bogus comment noted by Ben Huchings
v2: No code changes from v1, just fixed comment formatting snafu.
Sorry for the spam.
drivers/net/phy/mdio-octeon.c | 94 +++++++++++++++++++++++++++++++++++++++----
1 file changed, 87 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/mdio-octeon.c b/drivers/net/phy/mdio-octeon.c
index c2c878d..b51fa1f 100644
--- a/drivers/net/phy/mdio-octeon.c
+++ b/drivers/net/phy/mdio-octeon.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2009,2011 Cavium, Inc.
+ * Copyright (C) 2009-2012 Cavium, Inc.
*/
#include <linux/platform_device.h>
@@ -27,30 +27,98 @@
#define SMI_CLK 0x18
#define SMI_EN 0x20
+enum octeon_mdiobus_mode {
+ UNINIT = 0,
+ C22,
+ C45
+};
+
struct octeon_mdiobus {
struct mii_bus *mii_bus;
u64 register_base;
resource_size_t mdio_phys;
resource_size_t regsize;
+ enum octeon_mdiobus_mode mode;
int phy_irq[PHY_MAX_ADDR];
};
+static void octeon_mdiobus_set_mode(struct octeon_mdiobus *p,
+ enum octeon_mdiobus_mode m)
+{
+ union cvmx_smix_clk smi_clk;
+
+ if (m == p->mode)
+ return;
+
+ smi_clk.u64 = cvmx_read_csr(p->register_base + SMI_CLK);
+ smi_clk.s.mode = (m == C45) ? 1 : 0;
+ smi_clk.s.preamble = 1;
+ cvmx_write_csr(p->register_base + SMI_CLK, smi_clk.u64);
+ p->mode = m;
+}
+
+static int octeon_mdiobus_c45_addr(struct octeon_mdiobus *p,
+ int phy_id, int regnum)
+{
+ union cvmx_smix_cmd smi_cmd;
+ union cvmx_smix_wr_dat smi_wr;
+ int timeout = 1000;
+
+ octeon_mdiobus_set_mode(p, C45);
+
+ smi_wr.u64 = 0;
+ smi_wr.s.dat = regnum & 0xffff;
+ cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
+
+ regnum = (regnum >> 16) & 0x1f;
+
+ smi_cmd.u64 = 0;
+ smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_45_ADDRESS */
+ smi_cmd.s.phy_adr = phy_id;
+ smi_cmd.s.reg_adr = regnum;
+ cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
+
+ do {
+ /* Wait 1000 clocks so we don't saturate the RSL bus
+ * doing reads.
+ */
+ __delay(1000);
+ smi_wr.u64 = cvmx_read_csr(p->register_base + SMI_WR_DAT);
+ } while (smi_wr.s.pending && --timeout);
+
+ if (timeout <= 0)
+ return -EIO;
+ return 0;
+}
+
static int octeon_mdiobus_read(struct mii_bus *bus, int phy_id, int regnum)
{
struct octeon_mdiobus *p = bus->priv;
union cvmx_smix_cmd smi_cmd;
union cvmx_smix_rd_dat smi_rd;
+ unsigned int op = 1; /* MDIO_CLAUSE_22_READ */
int timeout = 1000;
+ if (regnum & MII_ADDR_C45) {
+ int r = octeon_mdiobus_c45_addr(p, phy_id, regnum);
+ if (r < 0)
+ return r;
+
+ regnum = (regnum >> 16) & 0x1f;
+ op = 3; /* MDIO_CLAUSE_45_READ */
+ } else {
+ octeon_mdiobus_set_mode(p, C22);
+ }
+
+
smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = 1; /* MDIO_CLAUSE_22_READ */
+ smi_cmd.s.phy_op = op;
smi_cmd.s.phy_adr = phy_id;
smi_cmd.s.reg_adr = regnum;
cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
do {
- /*
- * Wait 1000 clocks so we don't saturate the RSL bus
+ /* Wait 1000 clocks so we don't saturate the RSL bus
* doing reads.
*/
__delay(1000);
@@ -69,21 +137,33 @@ static int octeon_mdiobus_write(struct mii_bus *bus, int phy_id,
struct octeon_mdiobus *p = bus->priv;
union cvmx_smix_cmd smi_cmd;
union cvmx_smix_wr_dat smi_wr;
+ unsigned int op = 0; /* MDIO_CLAUSE_22_WRITE */
int timeout = 1000;
+
+ if (regnum & MII_ADDR_C45) {
+ int r = octeon_mdiobus_c45_addr(p, phy_id, regnum);
+ if (r < 0)
+ return r;
+
+ regnum = (regnum >> 16) & 0x1f;
+ op = 1; /* MDIO_CLAUSE_45_WRITE */
+ } else {
+ octeon_mdiobus_set_mode(p, C22);
+ }
+
smi_wr.u64 = 0;
smi_wr.s.dat = val;
cvmx_write_csr(p->register_base + SMI_WR_DAT, smi_wr.u64);
smi_cmd.u64 = 0;
- smi_cmd.s.phy_op = 0; /* MDIO_CLAUSE_22_WRITE */
+ smi_cmd.s.phy_op = op;
smi_cmd.s.phy_adr = phy_id;
smi_cmd.s.reg_adr = regnum;
cvmx_write_csr(p->register_base + SMI_CMD, smi_cmd.u64);
do {
- /*
- * Wait 1000 clocks so we don't saturate the RSL bus
+ /* Wait 1000 clocks so we don't saturate the RSL bus
* doing reads.
*/
__delay(1000);
--
1.7.11.7
From: David Daney <[email protected]>
Date: Wed, 3 Apr 2013 12:25:32 -0700
> From: David Daney <[email protected]>
>
> The Octeon SMI/MDIO interfaces can do clause 45 communications, so
> implement this in the driver.
>
> Also fix some comment formatting to make it consistent and to comply
> with the netdev style.
>
> Signed-off-by: David Daney <[email protected]>
Applied to net-next.