2013-04-08 12:58:23

by Eric Bénard

Subject: [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi

Add auart2 2 pins configuration on its main pads

Signed-off-by: Eric Bénard <[email protected]>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 7ba4966..13799cf 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -308,6 +308,17 @@
fsl,pull-up = <0>;
};

+ auart2_2pins_b: auart2-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+ 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7

2013-04-08 12:58:21

by Eric Bénard

Subject: [PATCH 2/3] ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi

Add auart3 2 pins configuration on its main pads

Signed-off-by: Eric Bénard <[email protected]>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 13799cf..5c45f29 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -343,6 +343,17 @@
fsl,pull-up = <0>;
};

+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7

2013-04-08 12:58:35

by Eric Bénard

Subject: [PATCH 3/3] ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi

Add auart4 2 pins configuration on SSP3 pads

Signed-off-by: Eric Bénard <[email protected]>
---
arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 5c45f29..25f2243 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -354,6 +354,17 @@
fsl,pull-up = <0>;
};

+ auart4_2pins_a: auart4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
+ 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
--
1.7.11.7

2013-04-09 12:35:34

by Shawn Guo

Subject: Re: [PATCH 1/3] ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi

On Mon, Apr 08, 2013 at 02:57:31PM +0200, Eric B?nard wrote:
> Add auart2 2 pins configuration on its main pads
>
> Signed-off-by: Eric B?nard <[email protected]>

All 3 patches applied, thanks.

> ---
> arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
> index 7ba4966..13799cf 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -308,6 +308,17 @@
> fsl,pull-up = <0>;
> };
>
> + auart2_2pins_b: auart2-2pins@1 {
> + reg = <1>;
> + fsl,pinmux-ids = <
> + 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
> + 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
> + >;
> + fsl,drive-strength = <0>;
> + fsl,voltage = <1>;
> + fsl,pull-up = <0>;
> + };
> +
> auart3_pins_a: auart3@0 {
> reg = <0>;
> fsl,pinmux-ids = <
> --
> 1.7.11.7
>