If rbd disk is open and rbd resize is done, new size is not visible by
filesystem.
Like is done in virtio-blk and dm driver, revalidate_disk() permits to
update the bd_inode size.
Signed-off-by: Laurent Barbe <[email protected]>
---
drivers/block/rbd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index f556f8a..1963025 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -2293,6 +2293,7 @@ static void rbd_update_mapping_size(struct rbd_device *rbd_dev)
dout("setting size to %llu sectors", (unsigned long long) size);
rbd_dev->mapping.size = (u64) size;
set_capacity(rbd_dev->disk, size);
+ revalidate_disk(rbd_dev->disk);
}
/*
--
1.7.10.4
On 04/10/2013 11:06 AM, Laurent Barbe wrote:
> If rbd disk is open and rbd resize is done, new size is not visible by
> filesystem.
> Like is done in virtio-blk and dm driver, revalidate_disk() permits to
> update the bd_inode size.
Looks good to me. I'll take this in via the ceph-client tree.
Thanks a lot.
Reviewed-by: Alex Elder <[email protected]>
> Signed-off-by: Laurent Barbe <[email protected]>
> ---
> drivers/block/rbd.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
> index f556f8a..1963025 100644
> --- a/drivers/block/rbd.c
> +++ b/drivers/block/rbd.c
> @@ -2293,6 +2293,7 @@ static void rbd_update_mapping_size(struct rbd_device *rbd_dev)
> dout("setting size to %llu sectors", (unsigned long long) size);
> rbd_dev->mapping.size = (u64) size;
> set_capacity(rbd_dev->disk, size);
> + revalidate_disk(rbd_dev->disk);
> }
>
> /*
>
On 04/10/2013 02:30 PM, Alex Elder wrote:
> On 04/10/2013 11:06 AM, Laurent Barbe wrote:
>> If rbd disk is open and rbd resize is done, new size is not visible by
>> filesystem.
>> Like is done in virtio-blk and dm driver, revalidate_disk() permits to
>> update the bd_inode size.
>
> Looks good to me. I'll take this in via the ceph-client tree.
> Thanks a lot.
Unfortunately this leads to a lock inversion. I'm going to
think about how to go about resolving it, so I won't be
committing it just yet.
-Alex
>
> Reviewed-by: Alex Elder <[email protected]>
>
>> Signed-off-by: Laurent Barbe <[email protected]>
>> ---
>> drivers/block/rbd.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
>> index f556f8a..1963025 100644
>> --- a/drivers/block/rbd.c
>> +++ b/drivers/block/rbd.c
>> @@ -2293,6 +2293,7 @@ static void rbd_update_mapping_size(struct rbd_device *rbd_dev)
>> dout("setting size to %llu sectors", (unsigned long long) size);
>> rbd_dev->mapping.size = (u64) size;
>> set_capacity(rbd_dev->disk, size);
>> + revalidate_disk(rbd_dev->disk);
>> }
>>
>> /*
>>
>
On 04/11/2013 03:47 AM, Laurent Barbe wrote:
> Thanks Alex,
>
> What do you mean about "lock inversion", deadlock ?
> Is it the mutex_lock in block_dev.c:revalidate_disk() and the mutex
> in rbd_dev_refresh ?
Yes.
When we refresh an rbd device we get the rbd device header
semaphore, and with this patch we then acquire the bdev's
mutex.
Meanhwhile, via blkdev_close() __blkdev_put() acquires the
bdev->bd_mutex, and eventually we get down to creating an
image object request. If it's a write, we need to get the
snapshot context, and to do that we get the rbd device
header mutex.
So we're acquiring the locks in two different orders, and
that's what I meant by "lock inversion," and yes, that
can lead to deadlock.
There may be a simple fix--like holding off calling
revalidate_disk() until after we release the lock,
most likely in rbd_dev_refresh(). But I just haven't
really thought it through yet.
-Alex
>
> 2013/4/11 Alex Elder <[email protected]>
>
>> On 04/10/2013 02:30 PM, Alex Elder wrote:
>>> On 04/10/2013 11:06 AM, Laurent Barbe wrote:
>>>> If rbd disk is open and rbd resize is done, new size is not visible by
>>>> filesystem.
>>>> Like is done in virtio-blk and dm driver, revalidate_disk() permits to
>>>> update the bd_inode size.
>>>
>>> Looks good to me. I'll take this in via the ceph-client tree.
>>> Thanks a lot.
>>
>> Unfortunately this leads to a lock inversion. I'm going to
>> think about how to go about resolving it, so I won't be
>> committing it just yet.
>>
>> -Alex
>>
>>>
>>> Reviewed-by: Alex Elder <[email protected]>
>>>
>>>> Signed-off-by: Laurent Barbe <[email protected]>
>>>> ---
>>>> drivers/block/rbd.c | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
>>>> index f556f8a..1963025 100644
>>>> --- a/drivers/block/rbd.c
>>>> +++ b/drivers/block/rbd.c
>>>> @@ -2293,6 +2293,7 @@ static void rbd_update_mapping_size(struct
>> rbd_device *rbd_dev)
>>>> dout("setting size to %llu sectors", (unsigned long long) size);
>>>> rbd_dev->mapping.size = (u64) size;
>>>> set_capacity(rbd_dev->disk, size);
>>>> + revalidate_disk(rbd_dev->disk);
>>>> }
>>>>
>>>> /*
>>>>
>>>
>>
>>
>
Ok,
thank you for your explanation, I'll look a little later.
2013/4/11 Alex Elder <[email protected]>:
> On 04/11/2013 03:47 AM, Laurent Barbe wrote:
>> Thanks Alex,
>>
>> What do you mean about "lock inversion", deadlock ?
>> Is it the mutex_lock in block_dev.c:revalidate_disk() and the mutex
>> in rbd_dev_refresh ?
>
> Yes.
>
> When we refresh an rbd device we get the rbd device header
> semaphore, and with this patch we then acquire the bdev's
> mutex.
>
> Meanhwhile, via blkdev_close() __blkdev_put() acquires the
> bdev->bd_mutex, and eventually we get down to creating an
> image object request. If it's a write, we need to get the
> snapshot context, and to do that we get the rbd device
> header mutex.
>
> So we're acquiring the locks in two different orders, and
> that's what I meant by "lock inversion," and yes, that
> can lead to deadlock.
>
> There may be a simple fix--like holding off calling
> revalidate_disk() until after we release the lock,
> most likely in rbd_dev_refresh(). But I just haven't
> really thought it through yet.
>
> -Alex
>
>>
>> 2013/4/11 Alex Elder <[email protected]>
>>
>>> On 04/10/2013 02:30 PM, Alex Elder wrote:
>>>> On 04/10/2013 11:06 AM, Laurent Barbe wrote:
>>>>> If rbd disk is open and rbd resize is done, new size is not visible by
>>>>> filesystem.
>>>>> Like is done in virtio-blk and dm driver, revalidate_disk() permits to
>>>>> update the bd_inode size.
>>>>
>>>> Looks good to me. I'll take this in via the ceph-client tree.
>>>> Thanks a lot.
>>>
>>> Unfortunately this leads to a lock inversion. I'm going to
>>> think about how to go about resolving it, so I won't be
>>> committing it just yet.
>>>
>>> -Alex
>>>
>>>>
>>>> Reviewed-by: Alex Elder <[email protected]>
>>>>
>>>>> Signed-off-by: Laurent Barbe <[email protected]>
>>>>> ---
>>>>> drivers/block/rbd.c | 1 +
>>>>> 1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
>>>>> index f556f8a..1963025 100644
>>>>> --- a/drivers/block/rbd.c
>>>>> +++ b/drivers/block/rbd.c
>>>>> @@ -2293,6 +2293,7 @@ static void rbd_update_mapping_size(struct
>>> rbd_device *rbd_dev)
>>>>> dout("setting size to %llu sectors", (unsigned long long) size);
>>>>> rbd_dev->mapping.size = (u64) size;
>>>>> set_capacity(rbd_dev->disk, size);
>>>>> + revalidate_disk(rbd_dev->disk);
>>>>> }
>>>>>
>>>>> /*
>>>>>
>>>>
>>>
>>>
>>
>