LinuxLists.cc - [PATCH 0/3] ASoC: rockchip: i2s: compatible with different chips

2015-11-10 07:32:32

Subject: [PATCH 0/3] ASoC: rockchip: i2s: compatible with different chips

2015-11-10 07:33:21

Subject: [PATCH 1/3] ASoC: rockchip: i2s: compatible with different chips

there maybe more than one i2s module inside chip, and these i2s modules
have different channels features.

for example: there are 3 i2s in rk3066, one support 8 channels playback
and 2 channels capture, but the others only support 2 channels playback
and 2 channels capture.

in order to compatible with these various chips, we add playback and
capture property to specify these values.

there are default channels configuration in driver: 8 channels playback
and 2 channels capture. if not add property, we use the default values.

Signed-off-by: Sugar Zhang <[email protected]>
---
sound/soc/rockchip/rockchip_i2s.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 58ee645..ec88e94 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -451,6 +451,7 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct rk_i2s_dev *i2s;
+ struct snd_soc_dai_driver *soc_dai;
struct resource *res;
void __iomem *regs;
int ret;
@@ -511,17 +512,26 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
goto err_pm_disable;
}

- /* refine capture channels */
+ soc_dai = devm_kzalloc(&pdev->dev,
+ sizeof(*soc_dai), GFP_KERNEL);
+ if (!soc_dai)
+ return -ENOMEM;
+
+ memcpy(soc_dai, &rockchip_i2s_dai, sizeof(*soc_dai));
+ if (!of_property_read_u32(node, "rockchip,playback-channels", &val)) {
+ if (val >= 2 && val <= 8)
+ soc_dai->playback.channels_max = val;
+ }
+
if (!of_property_read_u32(node, "rockchip,capture-channels", &val)) {
if (val >= 2 && val <= 8)
- rockchip_i2s_dai.capture.channels_max = val;
- else
- rockchip_i2s_dai.capture.channels_max = 2;
+ soc_dai->capture.channels_max = val;
}

ret = devm_snd_soc_register_component(&pdev->dev,
&rockchip_i2s_component,
- &rockchip_i2s_dai, 1);
+ soc_dai, 1);
+
if (ret) {
dev_err(&pdev->dev, "Could not register DAI\n");
goto err_suspend;
--
2.3.6

2015-11-10 07:32:31

by Sugar Zhang

[permalink] [raw]

Subject: [PATCH 2/3] ASoC: rockchip: add playback property

rockchip,playback-channels: max playback channels, 8 channels default.

Signed-off-by: Sugar Zhang <[email protected]>
---
Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 2267d24..b7f3a93 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -19,6 +19,7 @@ Required properties:
- clock-names: should contain followings:
- "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller
+- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.

Example for rk3288 I2S controller:
@@ -31,5 +32,6 @@ i2s@ff890000 {
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <8>;
rockchip,capture-channels = <2>;
};
--
2.3.6

2015-11-10 07:33:24

by Sugar Zhang

[permalink] [raw]

Subject: [PATCH 3/3] ARM: dts: rockchip: add channels properties for i2s

add playback and capture properties to compatible various chips.

Signed-off-by: Sugar Zhang <[email protected]>
---
arch/arm/boot/dts/rk3066a.dtsi | 6 ++++++
arch/arm/boot/dts/rk3188.dtsi | 2 ++
arch/arm/boot/dts/rk3288.dtsi | 2 ++
3 files changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 946f187..1003f9c 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -103,6 +103,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};

@@ -118,6 +120,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};

@@ -133,6 +137,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};

diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 3163042..b9b6b3a 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -118,6 +118,8 @@
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 4e7c6b7..e7ce9f1 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -669,6 +669,8 @@
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <2>;
status = "disabled";
};

--
2.3.6

2015-11-20 15:35:39

by Heiko Stuebner

[permalink] [raw]

Subject: Re: [PATCH 3/3] ARM: dts: rockchip: add channels properties for i2s

Am Dienstag, 10. November 2015, 15:32:09 schrieb Sugar Zhang:
> add playback and capture properties to compatible various chips.
>
> Signed-off-by: Sugar Zhang <[email protected]>

applied to my devicetree branch for 4.5

Thanks
Heiko