From: Lad, Prabhakar <[email protected]>
For NV12 format, even if display data is single image,
both VIDWIN0 and VIDWIN1 parameters must be used. The start
address of Y data plane and C data plane is configured in
VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively.
cuurently only one layer was requested, which is suffice
for yuv422, but for yuv420(NV12) two layers are required and
fix the same by requesting for other layer if pix fmt is NV12
during set_fmt.
Signed-off-by: Lad, Prabhakar <[email protected]>
---
drivers/media/platform/davinci/vpbe_display.c | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c
index 0341dcc..f2ee07b 100644
--- a/drivers/media/platform/davinci/vpbe_display.c
+++ b/drivers/media/platform/davinci/vpbe_display.c
@@ -922,6 +922,22 @@ static int vpbe_display_s_fmt(struct file *file, void *priv,
other video window */
layer->pix_fmt = *pixfmt;
+ if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12 &&
+ cpu_is_davinci_dm365()) {
+ struct vpbe_layer *otherlayer;
+
+ otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
+ /* if other layer is available, only
+ * claim it, do not configure it
+ */
+ ret = osd_device->ops.request_layer(osd_device,
+ otherlayer->layer_info.id);
+ if (ret < 0) {
+ v4l2_err(&vpbe_dev->v4l2_dev,
+ "Display Manager failed to allocate layer\n");
+ return -EBUSY;
+ }
+ }
/* Get osd layer config */
osd_device->ops.get_layer_config(osd_device,
--
1.7.4.1
Hello.
On 03-05-2013 13:53, Prabhakar Lad wrote:
> From: Lad, Prabhakar <[email protected]>
> For NV12 format, even if display data is single image,
> both VIDWIN0 and VIDWIN1 parameters must be used. The start
> address of Y data plane and C data plane is configured in
> VIDEOWIN0ADH/L and VIDEOWIN1ADH/L respectively.
> cuurently only one layer was requested, which is suffice
> for yuv422, but for yuv420(NV12) two layers are required and
> fix the same by requesting for other layer if pix fmt is NV12
> during set_fmt.
> Signed-off-by: Lad, Prabhakar <[email protected]>
> ---
> drivers/media/platform/davinci/vpbe_display.c | 16 ++++++++++++++++
> 1 files changed, 16 insertions(+), 0 deletions(-)
> diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c
> index 0341dcc..f2ee07b 100644
> --- a/drivers/media/platform/davinci/vpbe_display.c
> +++ b/drivers/media/platform/davinci/vpbe_display.c
> @@ -922,6 +922,22 @@ static int vpbe_display_s_fmt(struct file *file, void *priv,
> other video window */
>
> layer->pix_fmt = *pixfmt;
> + if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12 &&
> + cpu_is_davinci_dm365()) {
cpu_is_*() shouldn't be used in the drivers.
> + struct vpbe_layer *otherlayer;
> +
> + otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
> + /* if other layer is available, only
> + * claim it, do not configure it
> + */
> + ret = osd_device->ops.request_layer(osd_device,
> + otherlayer->layer_info.id);
> + if (ret < 0) {
> + v4l2_err(&vpbe_dev->v4l2_dev,
> + "Display Manager failed to allocate layer\n");
> + return -EBUSY;
> + }
> + }
WBR, Sergei