Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init()
in init path. So we can use pdev->pm_cap instead of using
pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code.
Acked-by: Lindar Liu <[email protected]>
Tested-by: Lindar Liu <[email protected]>
Signed-off-by: Yijing Wang <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
drivers/scsi/pm8001/pm8001_init.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index e4b9bc7..3861aa1 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -912,14 +912,13 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sas_ha_struct *sha = pci_get_drvdata(pdev);
struct pm8001_hba_info *pm8001_ha;
- int i , pos;
+ int i;
u32 device_state;
pm8001_ha = sha->lldd_ha;
flush_workqueue(pm8001_wq);
scsi_block_requests(pm8001_ha->shost);
- pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pos == 0) {
- printk(KERN_ERR " PCI PM not supported\n");
+ if (!pdev->pm_cap) {
+ dev_err(&pdev->dev, " PCI PM not supported\n");
return -ENODEV;
}
PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
--
1.7.1