From: Hongbo Zhang <[email protected]>
Hi Vinod, Dan, Leo and Scott, please have a look at these V2 patches.
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch set
adds support this DMA engine.
V2->V3 changes:
- edit Documentation/devicetree/bindings/powerpc/fsl/dma.txt
- edit text string in Kconfig and the driver files, using "elo series" to
mention all the current "elo*"
V1->V2 changes:
- removed the codes handling the register dgsr1, since it isn't used corrently
- renamed the DMA DT compatible to "fsl,elo3-dma"
- renamed the new dts files to "elo3-dma-<n>.dtsi"
Hongbo Zhang (2):
DMA: Freescale: Add new 8-channel DMA engine device tree nodes
DMA: Freescale: update driver to support 8-channel DMA engine
.../devicetree/bindings/powerpc/fsl/dma.txt | 8 +-
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 90 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 90 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
drivers/dma/Kconfig | 9 +-
drivers/dma/fsldma.c | 9 +-
drivers/dma/fsldma.h | 2 +-
7 files changed, 199 insertions(+), 13 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
--
1.7.9.5
From: Hongbo Zhang <[email protected]>
This patch adds support to 8-channel DMA engine, thus the driver works for both
the new 8-channel and the legacy 4-channel DMA engines.
Signed-off-by: Hongbo Zhang <[email protected]>
---
drivers/dma/Kconfig | 9 +++++----
drivers/dma/fsldma.c | 9 ++++++---
drivers/dma/fsldma.h | 2 +-
3 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e992489..b916800 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -107,14 +107,15 @@ config AT_HDMAC
Support the Atmel AHB DMA controller.
config FSL_DMA
- tristate "Freescale Elo and Elo Plus DMA support"
+ tristate "Freescale Elo series DMA support"
depends on FSL_SOC
select DMA_ENGINE
select ASYNC_TX_ENABLE_CHANNEL_SWITCH
---help---
- Enable support for the Freescale Elo and Elo Plus DMA controllers.
- The Elo is the DMA controller on some 82xx and 83xx parts, and the
- Elo Plus is the DMA controller on 85xx and 86xx parts.
+ Enable support for the Freescale Elo series DMA controllers.
+ The Elo is the DMA controller on some 82xx and 83xx parts, the Elo
+ Plus is the DMA controller on 85xx and 86xx parts, and the Elo3 is
+ DMA controller on QorIQ T and B parts.
config MPC512X_DMA
tristate "Freescale MPC512x built-in DMA engine support"
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 4fc2980..76252ce 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -1261,7 +1261,9 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev,
WARN_ON(fdev->feature != chan->feature);
chan->dev = fdev->dev;
- chan->id = ((res.start - 0x100) & 0xfff) >> 7;
+ chan->id = (res.start & 0xfff) < 0x300 ?
+ ((res.start - 0x100) & 0xfff) >> 7 :
+ ((res.start - 0x200) & 0xfff) >> 7;
if (chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
dev_err(fdev->dev, "too many channels for device\n");
err = -EINVAL;
@@ -1435,6 +1437,7 @@ static int fsldma_of_remove(struct platform_device *op)
}
static const struct of_device_id fsldma_of_ids[] = {
+ { .compatible = "fsl,elo3-dma", },
{ .compatible = "fsl,eloplus-dma", },
{ .compatible = "fsl,elo-dma", },
{}
@@ -1456,7 +1459,7 @@ static struct platform_driver fsldma_of_driver = {
static __init int fsldma_init(void)
{
- pr_info("Freescale Elo / Elo Plus DMA driver\n");
+ pr_info("Freescale Elo series DMA driver\n");
return platform_driver_register(&fsldma_of_driver);
}
@@ -1468,5 +1471,5 @@ static void __exit fsldma_exit(void)
subsys_initcall(fsldma_init);
module_exit(fsldma_exit);
-MODULE_DESCRIPTION("Freescale Elo / Elo Plus DMA driver");
+MODULE_DESCRIPTION("Freescale Elo series DMA driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index f5c3879..1ffc244 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -112,7 +112,7 @@ struct fsldma_chan_regs {
};
struct fsldma_chan;
-#define FSL_DMA_MAX_CHANS_PER_DEVICE 4
+#define FSL_DMA_MAX_CHANS_PER_DEVICE 8
struct fsldma_device {
void __iomem *regs; /* DGSR register base */
--
1.7.9.5
From: Hongbo Zhang <[email protected]>
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this patch add
the device tree nodes for them.
Signed-off-by: Hongbo Zhang <[email protected]>
---
.../devicetree/bindings/powerpc/fsl/dma.txt | 8 +-
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 90 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 90 ++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
4 files changed, 187 insertions(+), 5 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
index 2a4b4bc..8ee5732 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -76,10 +76,10 @@ Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers.
Required properties:
-- compatible : compatible list, contains 2 entries, first is
+- compatible : compatible list, contains 3 entries, first is
"fsl,CHIP-dma", where CHIP is the processor
(mpc8540, mpc8540, etc.) and the second is
- "fsl,eloplus-dma"
+ "fsl,eloplus-dma", the third is "fsl,elo3-dma"
- reg : <registers mapping for DMA general status reg>
- cell-index : controller index. 0 for controller @ 0x21000,
1 for controller @ 0xc000
@@ -100,7 +100,7 @@ Example:
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+ compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma", "fsl,elo3-dma";
reg = <0x21300 4>;
ranges = <0 0x21100 0x200>;
cell-index = <0>;
@@ -142,3 +142,5 @@ channel that should be used for another driver should not use
"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for
example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt
for more information.
+And the "fsl,eloplus-dma" and "fsl,elo3-dma" contain identical DMA channels,
+the only difference is channel numbers, 4 for the former and 8 for the later.
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
new file mode 100644
index 0000000..50cd911
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
+ *
+ * Copyright 2011-2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x100300 0x4 0x100600 0x4>;
+ ranges = <0x0 0x100100 0x500>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <28 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <29 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <30 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <31 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ cell-index = <4>;
+ interrupts = <76 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ cell-index = <5>;
+ interrupts = <77 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ cell-index = <6>;
+ interrupts = <78 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ cell-index = <7>;
+ interrupts = <79 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
new file mode 100644
index 0000000..c1aec68
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
@@ -0,0 +1,90 @@
+/*
+ * QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
+ *
+ * Copyright 2011-2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,elo3-dma";
+ reg = <0x101300 0x4 0x101600 0x4>;
+ ranges = <0x0 0x101100 0x500>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupts = <32 2 0 0>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupts = <33 2 0 0>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupts = <34 2 0 0>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupts = <35 2 0 0>;
+ };
+ dma-channel@300 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x300 0x80>;
+ cell-index = <4>;
+ interrupts = <80 2 0 0>;
+ };
+ dma-channel@380 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x380 0x80>;
+ cell-index = <5>;
+ interrupts = <81 2 0 0>;
+ };
+ dma-channel@400 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x400 0x80>;
+ cell-index = <6>;
+ interrupts = <82 2 0 0>;
+ };
+ dma-channel@480 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x480 0x80>;
+ cell-index = <7>;
+ interrupts = <83 2 0 0>;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index bd611a9..ec95c60 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -387,8 +387,8 @@
reg = <0xea000 0x4000>;
};
-/include/ "qoriq-dma-0.dtsi"
-/include/ "qoriq-dma-1.dtsi"
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
--
1.7.9.5
On 07/15/2013 05:34:58 AM, [email protected] wrote:
> From: Hongbo Zhang <[email protected]>
>
> Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this
> patch add
> the device tree nodes for them.
>
> Signed-off-by: Hongbo Zhang <[email protected]>
> ---
> .../devicetree/bindings/powerpc/fsl/dma.txt | 8 +-
> arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 90
> ++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 90
> ++++++++++++++++++++
> arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
> 4 files changed, 187 insertions(+), 5 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
> create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> index 2a4b4bc..8ee5732 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
> @@ -76,10 +76,10 @@ Freescale PowerPC 85xx/86xx have on chip general
> purpose DMA controllers.
>
> Required properties:
>
> -- compatible : compatible list, contains 2 entries, first is
> +- compatible : compatible list, contains 3 entries, first is
> "fsl,CHIP-dma", where CHIP is the processor
> (mpc8540, mpc8540, etc.) and the second is
> - "fsl,eloplus-dma"
> + "fsl,eloplus-dma", the third is "fsl,elo3-dma"
The new device tree nodes have only one compatible in the list, not
three. And if you were to both fsl,eloplus-dma and fsl,elo3-dma on the
same node, fsl,elo3-dma should come first.
> - reg : <registers mapping for DMA general status reg>
> - cell-index : controller index. 0 for controller @ 0x21000,
> 1 for controller @ 0xc000
> @@ -100,7 +100,7 @@ Example:
> dma@21300 {
> #address-cells = <1>;
> #size-cells = <1>;
> - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
> + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma",
> "fsl,elo3-dma";
In addition to the above issue about ordering, mpc8540 does not have
elo3.
-Scott