According to the em2860 datasheet, eeprom byte 08H is Chip
Configuration Low Byte and 09H is High Byte.
Usb power configuration is in the Low byte (same as the usb audio
class config).
Signed-off-by: Alban Browaeys <[email protected]>
---
drivers/media/usb/em28xx/em28xx-i2c.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index c4ff973..6ff7415 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -743,13 +743,13 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
break;
}
- if (le16_to_cpu(dev_config->chip_conf) & 1 << 3)
+ if (le16_to_cpu(dev_config->chip_conf) >> 4 & 1 << 3)
em28xx_info("\tUSB Remote wakeup capable\n");
- if (le16_to_cpu(dev_config->chip_conf) & 1 << 2)
+ if (le16_to_cpu(dev_config->chip_conf) >> 4 & 1 << 2)
em28xx_info("\tUSB Self power capable\n");
- switch (le16_to_cpu(dev_config->chip_conf) & 0x3) {
+ switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) {
case 0:
em28xx_info("\t500mA max power\n");
break;
--
1.8.3.2