This patch proposes to remove the IRQF_DISABLED flag from OMAP code
It's a NOOP since 2.6.35, and will be removed one day.
Signed-off-by: Michael Opdenacker <[email protected]>
---
arch/arm/mach-omap1/fpga.c | 3 +--
arch/arm/mach-omap1/pm.c | 1 -
arch/arm/mach-omap1/time.c | 2 +-
arch/arm/mach-omap1/timer32k.c | 2 +-
arch/arm/mach-omap2/timer.c | 2 +-
arch/arm/plat-omap/dma.c | 1 -
6 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 8bd71b2..3c0e422 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -135,8 +135,7 @@ static struct irq_chip omap_fpga_irq = {
* mask_ack routine for all of the FPGA interrupts has been changed from
* fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
* being serviced is left unmasked. We can do this because the FPGA cascade
- * interrupt is installed with the IRQF_DISABLED flag, which leaves all
- * interrupts masked at the CPU while an FPGA interrupt handler executes.
+ * interrupt is run with all interrupts masked.
*
* Limited testing indicates that this workaround appears to be effective
* for the smc9194 Ethernet driver used on the Innovator. It should work
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 358b82c..40a1ae3 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -628,7 +628,6 @@ static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
static struct irqaction omap_wakeup_irq = {
.name = "peripheral wakeup",
- .flags = IRQF_DISABLED,
.handler = omap_wakeup_interrupt
};
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 80603d2..6b5f298 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -160,7 +160,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
static struct irqaction omap_mpu_timer1_irq = {
.name = "mpu_timer1",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap_mpu_timer1_interrupt,
};
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 0b74246..107e7ab 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -156,7 +156,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap_32k_timer_interrupt,
};
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index b37e1fc..6552cd9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -78,7 +78,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
static struct irqaction omap2_gp_timer_irq = {
.name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = omap2_gp_timer_interrupt,
};
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 4d463ca..848eab5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1965,7 +1965,6 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
static struct irqaction omap24xx_dma_irq = {
.name = "DMA",
.handler = omap2_dma_irq_handler,
- .flags = IRQF_DISABLED
};
#else
--
1.8.1.2
* Michael Opdenacker <[email protected]> [130907 00:27]:
> This patch proposes to remove the IRQF_DISABLED flag from OMAP code
> It's a NOOP since 2.6.35, and will be removed one day.
Thanks, applying into omap-for-v3.13/fixes-not-urgent.
Tony