If rx_urb allocation fails in mcs_setup_urbs(), tx_urb leaks.
If mcs_receive_start() fails in mcs_net_open(), the both urbs are not deallocated.
The patch fixes the issues and by the way fixes label indentation.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <[email protected]>
---
drivers/net/irda/mcs7780.c | 40 +++++++++++++++++++++++-----------------
1 file changed, 23 insertions(+), 17 deletions(-)
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index f07c340..3f138ca 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -191,8 +191,8 @@ static inline int mcs_setup_transceiver_vishay(struct mcs_cb *mcs)
goto error;
ret = 0;
- error:
- return ret;
+error:
+ return ret;
}
/* Setup a communication between mcs7780 and agilent chip. */
@@ -501,8 +501,11 @@ static inline int mcs_setup_urbs(struct mcs_cb *mcs)
return 0;
mcs->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!mcs->rx_urb)
+ if (!mcs->rx_urb) {
+ usb_free_urb(mcs->tx_urb);
+ mcs->tx_urb = NULL;
return 0;
+ }
return 1;
}
@@ -643,9 +646,9 @@ static int mcs_speed_change(struct mcs_cb *mcs)
ret = mcs_set_reg(mcs, MCS_MODE_REG, rval);
mcs->speed = mcs->new_speed;
- error:
- mcs->new_speed = 0;
- return ret;
+error:
+ mcs->new_speed = 0;
+ return ret;
}
/* Ioctl calls not supported at this time. Can be an area of future work. */
@@ -738,17 +741,20 @@ static int mcs_net_open(struct net_device *netdev)
ret = mcs_receive_start(mcs);
if (ret)
- goto error3;
+ goto error4;
netif_start_queue(netdev);
return 0;
- error3:
- irlap_close(mcs->irlap);
- error2:
- kfree_skb(mcs->rx_buff.skb);
- error1:
- return ret;
+error4:
+ usb_free_urb(mcs->rx_urb);
+ usb_free_urb(mcs->tx_urb);
+error3:
+ irlap_close(mcs->irlap);
+error2:
+ kfree_skb(mcs->rx_buff.skb);
+error1:
+ return ret;
}
/* Receive callback function. */
@@ -946,11 +952,11 @@ static int mcs_probe(struct usb_interface *intf,
usb_set_intfdata(intf, mcs);
return 0;
- error2:
- free_netdev(ndev);
+error2:
+ free_netdev(ndev);
- error1:
- return ret;
+error1:
+ return ret;
}
/* The current device is removed, the USB layer tells us to shut down. */
--
1.8.1.2