From: Mathias Nyman <[email protected]>
If a command on the command ring needs to be cancelled before it is handled
it can be turned to a no-op operation when the ring is stopped.
We want to store the command ring enqueue pointer in the command structure
when the command in enqueued for the cancellation case.
Some commands used to store the command ring dequeue pointers instead of enqueue
(these often worked because enqueue happends to equal dequeue quite often)
Other commands correctly used the enqueue pointer but did not check if it pointed
to a valid trb or a link trb, this caused for example stop endpoint command to timeout in
xhci_stop_device() in about 2% of suspend/resume cases.
This should also solve some weird behavior happening in command cancellation cases.
This patch is based on a patch submitted by Sarah Sharp to linux-usb, but
then forgotten:
http://marc.info/?l=linux-usb&m=136269803207465&w=2
This patch should be backported to kernels as old as 3.7, that contain
the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
command ring function"
Signed-off-by: Mathias Nyman <[email protected]>
Signed-off-by: Sarah Sharp <[email protected]>
Cc: [email protected]
---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci-ring.c | 10 ++++++++++
drivers/usb/host/xhci.c | 25 +++++--------------------
drivers/usb/host/xhci.h | 1 +
4 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fae697e..ccf0a06 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
}
- cmd->command_trb = xhci->cmd_ring->enqueue;
+ cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
xhci_ring_cmd_db(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index aaa2906..9ac9672 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -123,6 +123,16 @@ static int enqueue_is_link_trb(struct xhci_ring *ring)
return TRB_TYPE_LINK_LE32(link->control);
}
+union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring)
+{
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control))
+ return ring->enq_seg->next->trbs;
+ return ring->enqueue;
+}
+
/* Updates trb to point to the next TRB in the ring, and updates seg if the next
* TRB is in a new segment. This does not skip over link TRBs, and it does not
* effect the ring dequeue or enqueue pointers.
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 49b6edb..1e36dbb 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2598,15 +2598,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
if (command) {
cmd_completion = command->completion;
cmd_status = &command->status;
- command->command_trb = xhci->cmd_ring->enqueue;
-
- /* Enqueue pointer can be left pointing to the link TRB,
- * we must handle that
- */
- if (TRB_TYPE_LINK_LE32(command->command_trb->link.control))
- command->command_trb =
- xhci->cmd_ring->enq_seg->next->trbs;
-
+ command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
cmd_completion = &virt_dev->cmd_completion;
@@ -2614,7 +2606,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
}
init_completion(cmd_completion);
- cmd_trb = xhci->cmd_ring->dequeue;
+ cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
if (!ctx_change)
ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
udev->slot_id, must_succeed);
@@ -3439,14 +3431,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
- reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
-
- /* Enqueue pointer can be left pointing to the link TRB,
- * we must handle that
- */
- if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control))
- reset_device_cmd->command_trb =
- xhci->cmd_ring->enq_seg->next->trbs;
+ reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, slot_id);
@@ -3650,7 +3635,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
union xhci_trb *cmd_trb;
spin_lock_irqsave(&xhci->lock, flags);
- cmd_trb = xhci->cmd_ring->dequeue;
+ cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3785,7 +3770,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
slot_ctx->dev_info >> 27);
spin_lock_irqsave(&xhci->lock, flags);
- cmd_trb = xhci->cmd_ring->dequeue;
+ cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 46aa148..f3e1020 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1840,6 +1840,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
union xhci_trb *cmd_trb);
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
unsigned int ep_index, unsigned int stream_id);
+union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
--
1.7.1
Hi Xiao,
I think you did something odd when you tried to send me the latest
revision of your patch "xhci: correct the usage of
USB_CTRL_SET_TIMEOUT". You sent this patch instead. On the plus side,
it looks like git-send-email works.
Can you try again?
Sarah Sharp
On Fri, Oct 11, 2013 at 08:47:54AM +0800, xiao jin wrote:
> From: Mathias Nyman <[email protected]>
>
> If a command on the command ring needs to be cancelled before it is handled
> it can be turned to a no-op operation when the ring is stopped.
> We want to store the command ring enqueue pointer in the command structure
> when the command in enqueued for the cancellation case.
>
> Some commands used to store the command ring dequeue pointers instead of enqueue
> (these often worked because enqueue happends to equal dequeue quite often)
>
> Other commands correctly used the enqueue pointer but did not check if it pointed
> to a valid trb or a link trb, this caused for example stop endpoint command to timeout in
> xhci_stop_device() in about 2% of suspend/resume cases.
>
> This should also solve some weird behavior happening in command cancellation cases.
>
> This patch is based on a patch submitted by Sarah Sharp to linux-usb, but
> then forgotten:
> http://marc.info/?l=linux-usb&m=136269803207465&w=2
>
> This patch should be backported to kernels as old as 3.7, that contain
> the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
> command ring function"
>
> Signed-off-by: Mathias Nyman <[email protected]>
> Signed-off-by: Sarah Sharp <[email protected]>
> Cc: [email protected]
> ---
> drivers/usb/host/xhci-hub.c | 2 +-
> drivers/usb/host/xhci-ring.c | 10 ++++++++++
> drivers/usb/host/xhci.c | 25 +++++--------------------
> drivers/usb/host/xhci.h | 1 +
> 4 files changed, 17 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> index fae697e..ccf0a06 100644
> --- a/drivers/usb/host/xhci-hub.c
> +++ b/drivers/usb/host/xhci-hub.c
> @@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
> if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
> xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
> }
> - cmd->command_trb = xhci->cmd_ring->enqueue;
> + cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
> xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
> xhci_ring_cmd_db(xhci);
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index aaa2906..9ac9672 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -123,6 +123,16 @@ static int enqueue_is_link_trb(struct xhci_ring *ring)
> return TRB_TYPE_LINK_LE32(link->control);
> }
>
> +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring)
> +{
> + /* Enqueue pointer can be left pointing to the link TRB,
> + * we must handle that
> + */
> + if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control))
> + return ring->enq_seg->next->trbs;
> + return ring->enqueue;
> +}
> +
> /* Updates trb to point to the next TRB in the ring, and updates seg if the next
> * TRB is in a new segment. This does not skip over link TRBs, and it does not
> * effect the ring dequeue or enqueue pointers.
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 49b6edb..1e36dbb 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -2598,15 +2598,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> if (command) {
> cmd_completion = command->completion;
> cmd_status = &command->status;
> - command->command_trb = xhci->cmd_ring->enqueue;
> -
> - /* Enqueue pointer can be left pointing to the link TRB,
> - * we must handle that
> - */
> - if (TRB_TYPE_LINK_LE32(command->command_trb->link.control))
> - command->command_trb =
> - xhci->cmd_ring->enq_seg->next->trbs;
> -
> + command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
> } else {
> cmd_completion = &virt_dev->cmd_completion;
> @@ -2614,7 +2606,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> }
> init_completion(cmd_completion);
>
> - cmd_trb = xhci->cmd_ring->dequeue;
> + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> if (!ctx_change)
> ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
> udev->slot_id, must_succeed);
> @@ -3439,14 +3431,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
>
> /* Attempt to submit the Reset Device command to the command ring */
> spin_lock_irqsave(&xhci->lock, flags);
> - reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
> -
> - /* Enqueue pointer can be left pointing to the link TRB,
> - * we must handle that
> - */
> - if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control))
> - reset_device_cmd->command_trb =
> - xhci->cmd_ring->enq_seg->next->trbs;
> + reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
>
> list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
> ret = xhci_queue_reset_device(xhci, slot_id);
> @@ -3650,7 +3635,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
> union xhci_trb *cmd_trb;
>
> spin_lock_irqsave(&xhci->lock, flags);
> - cmd_trb = xhci->cmd_ring->dequeue;
> + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
> if (ret) {
> spin_unlock_irqrestore(&xhci->lock, flags);
> @@ -3785,7 +3770,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
> slot_ctx->dev_info >> 27);
>
> spin_lock_irqsave(&xhci->lock, flags);
> - cmd_trb = xhci->cmd_ring->dequeue;
> + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
> udev->slot_id);
> if (ret) {
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 46aa148..f3e1020 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1840,6 +1840,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
> union xhci_trb *cmd_trb);
> void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
> unsigned int ep_index, unsigned int stream_id);
> +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring);
>
> /* xHCI roothub code */
> void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
> --
> 1.7.1
>
On Fri, Oct 11, 2013 at 10:25:23AM -0700, Sarah Sharp wrote:
> Hi Xiao,
>
> I think you did something odd when you tried to send me the latest
> revision of your patch "xhci: correct the usage of
> USB_CTRL_SET_TIMEOUT". You sent this patch instead. On the plus side,
> it looks like git-send-email works.
>
> Can you try again?
Ah, nevermind, I saw the v2 patch you sent later.
Sarah
> On Fri, Oct 11, 2013 at 08:47:54AM +0800, xiao jin wrote:
> > From: Mathias Nyman <[email protected]>
> >
> > If a command on the command ring needs to be cancelled before it is handled
> > it can be turned to a no-op operation when the ring is stopped.
> > We want to store the command ring enqueue pointer in the command structure
> > when the command in enqueued for the cancellation case.
> >
> > Some commands used to store the command ring dequeue pointers instead of enqueue
> > (these often worked because enqueue happends to equal dequeue quite often)
> >
> > Other commands correctly used the enqueue pointer but did not check if it pointed
> > to a valid trb or a link trb, this caused for example stop endpoint command to timeout in
> > xhci_stop_device() in about 2% of suspend/resume cases.
> >
> > This should also solve some weird behavior happening in command cancellation cases.
> >
> > This patch is based on a patch submitted by Sarah Sharp to linux-usb, but
> > then forgotten:
> > http://marc.info/?l=linux-usb&m=136269803207465&w=2
> >
> > This patch should be backported to kernels as old as 3.7, that contain
> > the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
> > command ring function"
> >
> > Signed-off-by: Mathias Nyman <[email protected]>
> > Signed-off-by: Sarah Sharp <[email protected]>
> > Cc: [email protected]
> > ---
> > drivers/usb/host/xhci-hub.c | 2 +-
> > drivers/usb/host/xhci-ring.c | 10 ++++++++++
> > drivers/usb/host/xhci.c | 25 +++++--------------------
> > drivers/usb/host/xhci.h | 1 +
> > 4 files changed, 17 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> > index fae697e..ccf0a06 100644
> > --- a/drivers/usb/host/xhci-hub.c
> > +++ b/drivers/usb/host/xhci-hub.c
> > @@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
> > if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
> > xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
> > }
> > - cmd->command_trb = xhci->cmd_ring->enqueue;
> > + cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
> > xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
> > xhci_ring_cmd_db(xhci);
> > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> > index aaa2906..9ac9672 100644
> > --- a/drivers/usb/host/xhci-ring.c
> > +++ b/drivers/usb/host/xhci-ring.c
> > @@ -123,6 +123,16 @@ static int enqueue_is_link_trb(struct xhci_ring *ring)
> > return TRB_TYPE_LINK_LE32(link->control);
> > }
> >
> > +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring)
> > +{
> > + /* Enqueue pointer can be left pointing to the link TRB,
> > + * we must handle that
> > + */
> > + if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control))
> > + return ring->enq_seg->next->trbs;
> > + return ring->enqueue;
> > +}
> > +
> > /* Updates trb to point to the next TRB in the ring, and updates seg if the next
> > * TRB is in a new segment. This does not skip over link TRBs, and it does not
> > * effect the ring dequeue or enqueue pointers.
> > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> > index 49b6edb..1e36dbb 100644
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -2598,15 +2598,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> > if (command) {
> > cmd_completion = command->completion;
> > cmd_status = &command->status;
> > - command->command_trb = xhci->cmd_ring->enqueue;
> > -
> > - /* Enqueue pointer can be left pointing to the link TRB,
> > - * we must handle that
> > - */
> > - if (TRB_TYPE_LINK_LE32(command->command_trb->link.control))
> > - command->command_trb =
> > - xhci->cmd_ring->enq_seg->next->trbs;
> > -
> > + command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
> > } else {
> > cmd_completion = &virt_dev->cmd_completion;
> > @@ -2614,7 +2606,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> > }
> > init_completion(cmd_completion);
> >
> > - cmd_trb = xhci->cmd_ring->dequeue;
> > + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > if (!ctx_change)
> > ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
> > udev->slot_id, must_succeed);
> > @@ -3439,14 +3431,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
> >
> > /* Attempt to submit the Reset Device command to the command ring */
> > spin_lock_irqsave(&xhci->lock, flags);
> > - reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
> > -
> > - /* Enqueue pointer can be left pointing to the link TRB,
> > - * we must handle that
> > - */
> > - if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control))
> > - reset_device_cmd->command_trb =
> > - xhci->cmd_ring->enq_seg->next->trbs;
> > + reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> >
> > list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
> > ret = xhci_queue_reset_device(xhci, slot_id);
> > @@ -3650,7 +3635,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
> > union xhci_trb *cmd_trb;
> >
> > spin_lock_irqsave(&xhci->lock, flags);
> > - cmd_trb = xhci->cmd_ring->dequeue;
> > + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
> > if (ret) {
> > spin_unlock_irqrestore(&xhci->lock, flags);
> > @@ -3785,7 +3770,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
> > slot_ctx->dev_info >> 27);
> >
> > spin_lock_irqsave(&xhci->lock, flags);
> > - cmd_trb = xhci->cmd_ring->dequeue;
> > + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
> > udev->slot_id);
> > if (ret) {
> > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> > index 46aa148..f3e1020 100644
> > --- a/drivers/usb/host/xhci.h
> > +++ b/drivers/usb/host/xhci.h
> > @@ -1840,6 +1840,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
> > union xhci_trb *cmd_trb);
> > void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
> > unsigned int ep_index, unsigned int stream_id);
> > +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring);
> >
> > /* xHCI roothub code */
> > void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
> > --
> > 1.7.1
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Sarah,
As you said, I make a mistake and send wrong patch. I am sorry for it.
On Fri, 2013-10-11 at 10:28 -0700, Sarah Sharp wrote:
> On Fri, Oct 11, 2013 at 10:25:23AM -0700, Sarah Sharp wrote:
> > Hi Xiao,
> >
> > I think you did something odd when you tried to send me the latest
> > revision of your patch "xhci: correct the usage of
> > USB_CTRL_SET_TIMEOUT". You sent this patch instead. On the plus side,
> > it looks like git-send-email works.
> >
> > Can you try again?
>
> Ah, nevermind, I saw the v2 patch you sent later.
>
> Sarah
>
> > On Fri, Oct 11, 2013 at 08:47:54AM +0800, xiao jin wrote:
> > > From: Mathias Nyman <[email protected]>
> > >
> > > If a command on the command ring needs to be cancelled before it is handled
> > > it can be turned to a no-op operation when the ring is stopped.
> > > We want to store the command ring enqueue pointer in the command structure
> > > when the command in enqueued for the cancellation case.
> > >
> > > Some commands used to store the command ring dequeue pointers instead of enqueue
> > > (these often worked because enqueue happends to equal dequeue quite often)
> > >
> > > Other commands correctly used the enqueue pointer but did not check if it pointed
> > > to a valid trb or a link trb, this caused for example stop endpoint command to timeout in
> > > xhci_stop_device() in about 2% of suspend/resume cases.
> > >
> > > This should also solve some weird behavior happening in command cancellation cases.
> > >
> > > This patch is based on a patch submitted by Sarah Sharp to linux-usb, but
> > > then forgotten:
> > > http://marc.info/?l=linux-usb&m=136269803207465&w=2
> > >
> > > This patch should be backported to kernels as old as 3.7, that contain
> > > the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting
> > > command ring function"
> > >
> > > Signed-off-by: Mathias Nyman <[email protected]>
> > > Signed-off-by: Sarah Sharp <[email protected]>
> > > Cc: [email protected]
> > > ---
> > > drivers/usb/host/xhci-hub.c | 2 +-
> > > drivers/usb/host/xhci-ring.c | 10 ++++++++++
> > > drivers/usb/host/xhci.c | 25 +++++--------------------
> > > drivers/usb/host/xhci.h | 1 +
> > > 4 files changed, 17 insertions(+), 21 deletions(-)
> > >
> > > diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> > > index fae697e..ccf0a06 100644
> > > --- a/drivers/usb/host/xhci-hub.c
> > > +++ b/drivers/usb/host/xhci-hub.c
> > > @@ -287,7 +287,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
> > > if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
> > > xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
> > > }
> > > - cmd->command_trb = xhci->cmd_ring->enqueue;
> > > + cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > > list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
> > > xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
> > > xhci_ring_cmd_db(xhci);
> > > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> > > index aaa2906..9ac9672 100644
> > > --- a/drivers/usb/host/xhci-ring.c
> > > +++ b/drivers/usb/host/xhci-ring.c
> > > @@ -123,6 +123,16 @@ static int enqueue_is_link_trb(struct xhci_ring *ring)
> > > return TRB_TYPE_LINK_LE32(link->control);
> > > }
> > >
> > > +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring)
> > > +{
> > > + /* Enqueue pointer can be left pointing to the link TRB,
> > > + * we must handle that
> > > + */
> > > + if (TRB_TYPE_LINK_LE32(ring->enqueue->link.control))
> > > + return ring->enq_seg->next->trbs;
> > > + return ring->enqueue;
> > > +}
> > > +
> > > /* Updates trb to point to the next TRB in the ring, and updates seg if the next
> > > * TRB is in a new segment. This does not skip over link TRBs, and it does not
> > > * effect the ring dequeue or enqueue pointers.
> > > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> > > index 49b6edb..1e36dbb 100644
> > > --- a/drivers/usb/host/xhci.c
> > > +++ b/drivers/usb/host/xhci.c
> > > @@ -2598,15 +2598,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> > > if (command) {
> > > cmd_completion = command->completion;
> > > cmd_status = &command->status;
> > > - command->command_trb = xhci->cmd_ring->enqueue;
> > > -
> > > - /* Enqueue pointer can be left pointing to the link TRB,
> > > - * we must handle that
> > > - */
> > > - if (TRB_TYPE_LINK_LE32(command->command_trb->link.control))
> > > - command->command_trb =
> > > - xhci->cmd_ring->enq_seg->next->trbs;
> > > -
> > > + command->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > > list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
> > > } else {
> > > cmd_completion = &virt_dev->cmd_completion;
> > > @@ -2614,7 +2606,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> > > }
> > > init_completion(cmd_completion);
> > >
> > > - cmd_trb = xhci->cmd_ring->dequeue;
> > > + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > > if (!ctx_change)
> > > ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
> > > udev->slot_id, must_succeed);
> > > @@ -3439,14 +3431,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
> > >
> > > /* Attempt to submit the Reset Device command to the command ring */
> > > spin_lock_irqsave(&xhci->lock, flags);
> > > - reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
> > > -
> > > - /* Enqueue pointer can be left pointing to the link TRB,
> > > - * we must handle that
> > > - */
> > > - if (TRB_TYPE_LINK_LE32(reset_device_cmd->command_trb->link.control))
> > > - reset_device_cmd->command_trb =
> > > - xhci->cmd_ring->enq_seg->next->trbs;
> > > + reset_device_cmd->command_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > >
> > > list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
> > > ret = xhci_queue_reset_device(xhci, slot_id);
> > > @@ -3650,7 +3635,7 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
> > > union xhci_trb *cmd_trb;
> > >
> > > spin_lock_irqsave(&xhci->lock, flags);
> > > - cmd_trb = xhci->cmd_ring->dequeue;
> > > + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > > ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
> > > if (ret) {
> > > spin_unlock_irqrestore(&xhci->lock, flags);
> > > @@ -3785,7 +3770,7 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
> > > slot_ctx->dev_info >> 27);
> > >
> > > spin_lock_irqsave(&xhci->lock, flags);
> > > - cmd_trb = xhci->cmd_ring->dequeue;
> > > + cmd_trb = xhci_find_next_enqueue(xhci->cmd_ring);
> > > ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
> > > udev->slot_id);
> > > if (ret) {
> > > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> > > index 46aa148..f3e1020 100644
> > > --- a/drivers/usb/host/xhci.h
> > > +++ b/drivers/usb/host/xhci.h
> > > @@ -1840,6 +1840,7 @@ int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
> > > union xhci_trb *cmd_trb);
> > > void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
> > > unsigned int ep_index, unsigned int stream_id);
> > > +union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring);
> > >
> > > /* xHCI roothub code */
> > > void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
> > > --
> > > 1.7.1
> > >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html