Suspend scenario in case of ohci-s3c2410 glue was not
properly handled as it was not suspending generic part
of ohci controller. Alan Stern suggested, properly handle
ohci-s3c2410 suspend scenario.
Calling explicitly the ohci_suspend()
routine in ohci_hcd_s3c2410_drv_suspend() will ensure
proper handling of suspend scenario.
Signed-off-by: Manjunath Goudar <[email protected]>
Acked-by: Alan Stern <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V3->V4:
-No changes, only added Alan Acked-by.
V2->V3:
-No changes.
As a build failure on "ep93xx proper suspend patch" and Linaro
id bounced. Rewrote this patch on top of latest Greg usb-next
branch. This patch not gives any build error. Patch is required
for ohci-s3c2410 proper suspending as Alan mentioned.
Initially when I wrote this patch I was working in Linaro, now
I am not part of Linaro that is why Linaro id is bouncing. Sending
this patch from personal mail id.
V1->V2:
-No changes.
Due to the build failure on ep93xx reverted this patch.
This patch is needed as Alan Stern suggestion.
drivers/usb/host/ohci-s3c2410.c | 21 ++++-----------------
1 file changed, 4 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index be3429e..b5bf9b7 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -426,28 +426,15 @@ static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct platform_device *pdev = to_platform_device(dev);
- unsigned long flags;
+ bool do_wakeup = device_may_wakeup(dev);
int rc = 0;
- /*
- * Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- */
- spin_lock_irqsave(&ohci->lock, flags);
- if (ohci->rh_state != OHCI_RH_SUSPENDED) {
- rc = -EINVAL;
- goto bail;
- }
-
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ rc = ohci_suspend(hcd, do_wakeup);
+ if (rc)
+ return rc;
s3c2410_stop_hc(pdev);
-bail:
- spin_unlock_irqrestore(&ohci->lock, flags);
return rc;
}
--
1.7.9.5