The netif_err() and netif_info() should have the terminating newline
at the end of the message.
Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5107372..3d8a565 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2135,11 +2135,11 @@ static int rtl8152_probe(struct usb_interface *intf,
ret = register_netdev(netdev);
if (ret != 0) {
- netif_err(tp, probe, netdev, "couldn't register the device");
+ netif_err(tp, probe, netdev, "couldn't register the device\n");
goto out1;
}
- netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
+ netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
return 0;
--
1.8.4.2
On Mon, 2014-01-06 at 17:19 +0800, Hayes Wang wrote:
> The netif_err() and netif_info() should have the terminating newline
> at the end of the message.
dev_<level> uses also need terminating newlines.
Perhaps it's a bit more comprehensive to convert the
pr_<level>_ratelimited uses to use net_ratelimit and
netdev_<level>.
---
drivers/net/usb/r8152.c | 25 ++++++++++++++-----------
1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 13fabbb..8ae97a5 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -966,10 +966,12 @@ static void read_bulk_callback(struct urb *urb)
case -ENOENT:
return; /* the urb is in unlink state */
case -ETIME:
- pr_warn_ratelimited("may be reset is needed?..\n");
+ if (net_ratelimit())
+ netdev_warn(netdev, "maybe reset is needed?\n");
break;
default:
- pr_warn_ratelimited("Rx status %d\n", status);
+ if (net_ratelimit())
+ netdev_warn(netdev, "Rx status %d\n", status);
break;
}
@@ -1002,7 +1004,8 @@ static void write_bulk_callback(struct urb *urb)
stats = rtl8152_get_stats(tp->netdev);
if (status) {
- pr_warn_ratelimited("Tx status %d\n", status);
+ if (net_ratelimit())
+ netdev_warn(tp->netdev, "Tx status %d\n", status);
stats->tx_errors += agg->skb_num;
} else {
stats->tx_packets += agg->skb_num;
@@ -1079,7 +1082,7 @@ resubmit:
netif_device_detach(tp->netdev);
else if (res)
netif_err(tp, intr, tp->netdev,
- "can't resubmit intr, status %d\n", res);
+ "can't resubmit intr, status %d\n", res);
}
static inline void *rx_agg_align(void *data)
@@ -1490,7 +1493,7 @@ static void rtl8152_tx_timeout(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int i;
- netif_warn(tp, tx_err, netdev, "Tx timeout.\n");
+ netif_warn(tp, tx_err, netdev, "Tx timeout\n");
for (i = 0; i < RTL8152_MAX_TX; i++)
usb_unlink_urb(tp->tx_info[i].urb);
}
@@ -2284,8 +2287,8 @@ static int rtl8152_open(struct net_device *netdev)
if (res) {
if (res == -ENODEV)
netif_device_detach(tp->netdev);
- netif_warn(tp, ifup, netdev,
- "intr_urb submit failed: %d\n", res);
+ netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
+ res);
return res;
}
@@ -2751,7 +2754,7 @@ static int rtl8152_probe(struct usb_interface *intf,
netdev = alloc_etherdev(sizeof(struct r8152));
if (!netdev) {
- dev_err(&intf->dev, "Out of memory");
+ dev_err(&intf->dev, "Out of memory\n");
return -ENOMEM;
}
@@ -2760,7 +2763,7 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->msg_enable = 0x7FFF;
if (!rtl_ops_init(tp, id)) {
- netif_err(tp, probe, netdev, "Unknown Device");
+ netif_err(tp, probe, netdev, "Unknown Device\n");
return -ENODEV;
}
@@ -2797,11 +2800,11 @@ static int rtl8152_probe(struct usb_interface *intf,
ret = register_netdev(netdev);
if (ret != 0) {
- netif_err(tp, probe, netdev, "couldn't register the device");
+ netif_err(tp, probe, netdev, "couldn't register the device\n");
goto out1;
}
- netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
+ netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
return 0;
- Replace pr_warn_ratelimited() with net_ratelimit() and netdev_warn().
- Adjust the algnment of some messages.
- Remove the peroid.
- Fix some messages don't have terminating newline.
Signed-off-by: Hayes Wang <[email protected]>
---
drivers/net/usb/r8152.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5107372..49632ff 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -814,10 +814,12 @@ static void read_bulk_callback(struct urb *urb)
case -ENOENT:
return; /* the urb is in unlink state */
case -ETIME:
- pr_warn_ratelimited("may be reset is needed?..\n");
+ if (net_ratelimit())
+ netdev_warn(netdev, "maybe reset is needed?\n");
break;
default:
- pr_warn_ratelimited("Rx status %d\n", status);
+ if (net_ratelimit())
+ netdev_warn(netdev, "Rx status %d\n", status);
break;
}
@@ -850,7 +852,8 @@ static void write_bulk_callback(struct urb *urb)
stats = rtl8152_get_stats(tp->netdev);
if (status) {
- pr_warn_ratelimited("Tx status %d\n", status);
+ if (net_ratelimit())
+ netdev_warn(tp->netdev, "Tx status %d\n", status);
stats->tx_errors += agg->skb_num;
} else {
stats->tx_packets += agg->skb_num;
@@ -927,7 +930,7 @@ resubmit:
netif_device_detach(tp->netdev);
else if (res)
netif_err(tp, intr, tp->netdev,
- "can't resubmit intr, status %d\n", res);
+ "can't resubmit intr, status %d\n", res);
}
static inline void *rx_agg_align(void *data)
@@ -1336,7 +1339,7 @@ static void rtl8152_tx_timeout(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int i;
- netif_warn(tp, tx_err, netdev, "Tx timeout.\n");
+ netif_warn(tp, tx_err, netdev, "Tx timeout\n");
for (i = 0; i < RTL8152_MAX_TX; i++)
usb_unlink_urb(tp->tx_info[i].urb);
}
@@ -1806,8 +1809,8 @@ static int rtl8152_open(struct net_device *netdev)
if (res) {
if (res == -ENODEV)
netif_device_detach(tp->netdev);
- netif_warn(tp, ifup, netdev,
- "intr_urb submit failed: %d\n", res);
+ netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
+ res);
return res;
}
@@ -2094,7 +2097,7 @@ static int rtl8152_probe(struct usb_interface *intf,
netdev = alloc_etherdev(sizeof(struct r8152));
if (!netdev) {
- dev_err(&intf->dev, "Out of memory");
+ dev_err(&intf->dev, "Out of memory\n");
return -ENOMEM;
}
@@ -2135,11 +2138,11 @@ static int rtl8152_probe(struct usb_interface *intf,
ret = register_netdev(netdev);
if (ret != 0) {
- netif_err(tp, probe, netdev, "couldn't register the device");
+ netif_err(tp, probe, netdev, "couldn't register the device\n");
goto out1;
}
- netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
+ netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
return 0;
--
1.8.4.2
From: Hayes Wang <[email protected]>
Date: Tue, 7 Jan 2014 11:18:22 +0800
> - Replace pr_warn_ratelimited() with net_ratelimit() and netdev_warn().
> - Adjust the algnment of some messages.
> - Remove the peroid.
> - Fix some messages don't have terminating newline.
>
> Signed-off-by: Hayes Wang <[email protected]>
I only want major bug fixes in 'net' at this time so I've applied
this to 'net-next'.
Thanks.