This patchset contains the board support package for the
Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
minimal set of code needed for a BCM7445-based board to boot
the Linux kernel.
These changes heavily leverage the OF/devicetree framework.
v6:
- rebased to v3.14-rc1
- utilize common APIs for handling CPU power-down
- drop deprecated __cpuinit attributes
v5 (https://lkml.org/lkml/2014/1/21/640):
- rebased to v3.13 tag
- make UART DT node a child of 'rdb' node
- fix ordering of debug UART entries
v4 (https://lkml.org/lkml/2014/1/17/455):
- make a reboot driver and put it in the drivers folder
- rework DT bindings to leverage 'syscon'
- rework BSP code to use 'syscon' for all register mappings
- misc. tweaks per suggestions from v3
v3 (https://lkml.org/lkml/2014/1/14/696):
- rebased to v3.13-rc8
- switched to using 'multi_v7_defconfig'
- eliminated dependence on compile-time peripheral register access
- moved DT node iomap out from 'init_early'
- misc. minor cleanups from mailing-list discussion for v2
v2 (https://lkml.org/lkml/2013/11/26/570):
- rebased to v3.13-rc1
- moved implementation to 'mach-bcm' folder
- added CPU init for B16RM
v1:
- initial submission
[1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445
Marc Carino (8):
ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
power: reset: Add reboot driver for brcmstb
ARM: brcmstb: add debug UART for earlyprintk support
ARM: do CPU-specific init for Broadcom Brahma15 cores
ARM: brcmstb: add CPU binding for Broadcom Brahma15
ARM: brcmstb: add misc. DT bindings for brcmstb
ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
.../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
Documentation/devicetree/bindings/arm/gic.txt | 1 +
arch/arm/Kconfig.debug | 15 +-
arch/arm/boot/dts/bcm7445.dts | 111 +++++++
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 15 +
arch/arm/mach-bcm/Makefile | 4 +
arch/arm/mach-bcm/brcmstb.c | 104 +++++++
arch/arm/mach-bcm/brcmstb.h | 38 +++
arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++
arch/arm/mach-bcm/hotplug-brcmstb.c | 311 ++++++++++++++++++++
arch/arm/mm/proc-v7.S | 11 +
drivers/power/reset/Kconfig | 10 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/brcmstb-reboot.c | 120 ++++++++
16 files changed, 870 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
create mode 100644 arch/arm/boot/dts/bcm7445.dts
create mode 100644 arch/arm/mach-bcm/brcmstb.c
create mode 100644 arch/arm/mach-bcm/brcmstb.h
create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
create mode 100644 drivers/power/reset/brcmstb-reboot.c
The BCM7xxx series of Broadcom SoCs are used primarily in set-top boxes.
This patch adds machine support for the ARM-based Broadcom SoCs.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/mach-bcm/Kconfig | 14 ++
arch/arm/mach-bcm/Makefile | 4 +
arch/arm/mach-bcm/brcmstb.c | 104 ++++++++++++
arch/arm/mach-bcm/brcmstb.h | 38 +++++
arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++++
arch/arm/mach-bcm/hotplug-brcmstb.c | 311 +++++++++++++++++++++++++++++++++++
7 files changed, 505 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-bcm/brcmstb.c
create mode 100644 arch/arm/mach-bcm/brcmstb.h
create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 845bc74..2437b7f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -12,6 +12,7 @@ CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_BERLIN=y
CONFIG_MACH_BERLIN_BG2=y
CONFIG_MACH_BERLIN_BG2CD=y
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9..f85e7bc 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -32,6 +32,20 @@ config ARCH_BCM_MOBILE
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
+config ARCH_BRCMSTB
+ bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
+ depends on MMU
+ select ARM_GIC
+ select MIGHT_HAVE_PCI
+ select HAVE_SMP
+ select HAVE_ARM_ARCH_TIMER
+ help
+ Say Y if you intend to run the kernel on a Broadcom ARM-based STB
+ chipset.
+
+ This enables support for Broadcom ARM-based set-top box chipsets,
+ including the 7445 family of chips.
+
endmenu
endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index c2ccd5a..b744a12 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -13,3 +13,7 @@
obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
+
+obj-$(CONFIG_ARCH_BRCMSTB) := brcmstb.o
+obj-$(CONFIG_SMP) += headsmp-brcmstb.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug-brcmstb.o
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
new file mode 100644
index 0000000..71387a8
--- /dev/null
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/console.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include "brcmstb.h"
+
+/***********************************************************************
+ * STB CPU (main application processor)
+ ***********************************************************************/
+
+static const char *brcmstb_match[] __initconst = {
+ "brcm,bcm7445",
+ "brcm,brcmstb",
+ NULL
+};
+
+/***********************************************************************
+ * SMP boot
+ ***********************************************************************/
+
+#ifdef CONFIG_SMP
+static DEFINE_SPINLOCK(boot_lock);
+
+static void brcmstb_secondary_init(unsigned int cpu)
+{
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static int brcmstb_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /* Bring up power to the core if necessary */
+ if (brcmstb_cpu_get_power_state(cpu) == 0)
+ brcmstb_cpu_power_on(cpu);
+
+ brcmstb_cpu_boot(cpu);
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+struct smp_operations brcmstb_smp_ops __initdata = {
+ .smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
+ .smp_secondary_init = brcmstb_secondary_init,
+ .smp_boot_secondary = brcmstb_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = brcmstb_cpu_kill,
+ .cpu_die = brcmstb_cpu_die,
+#endif
+};
+#endif
+
+DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
+ .dt_compat = brcmstb_match,
+#ifdef CONFIG_SMP
+ .smp = smp_ops(brcmstb_smp_ops),
+#endif
+MACHINE_END
diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h
new file mode 100644
index 0000000..e49bde6
--- /dev/null
+++ b/arch/arm/mach-bcm/brcmstb.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_H__
+#define __BRCMSTB_H__
+
+#if !defined(__ASSEMBLY__)
+#include <linux/smp.h>
+#endif
+
+#if !defined(__ASSEMBLY__)
+extern void brcmstb_secondary_startup(void);
+extern void brcmstb_cpu_boot(unsigned int cpu);
+extern void brcmstb_cpu_power_on(unsigned int cpu);
+extern int brcmstb_cpu_get_power_state(unsigned int cpu);
+extern struct smp_operations brcmstb_smp_ops;
+#if defined(CONFIG_HOTPLUG_CPU)
+extern void brcmstb_cpu_die(unsigned int cpu);
+extern int brcmstb_cpu_kill(unsigned int cpu);
+void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus);
+#else
+static inline void brcmstb_cpu_die(unsigned int cpu) {}
+static inline int brcmstb_cpu_kill(unsigned int cpu) {}
+static inline void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus) {}
+#endif
+#endif
+
+#endif /* __BRCMSTB_H__ */
diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S
new file mode 100644
index 0000000..89134c7
--- /dev/null
+++ b/arch/arm/mach-bcm/headsmp-brcmstb.S
@@ -0,0 +1,33 @@
+/*
+ * SMP boot code for secondary CPUs
+ * Based on arch/arm/mach-tegra/headsmp.S
+ *
+ * Copyright (C) 2010 NVIDIA, Inc.
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ .section ".text.head", "ax"
+
+ENTRY(brcmstb_secondary_startup)
+ /*
+ * Ensure CPU is in a sane state by disabling all IRQs and switching
+ * into SVC mode.
+ */
+ setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
+
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(brcmstb_secondary_startup)
diff --git a/arch/arm/mach-bcm/hotplug-brcmstb.c b/arch/arm/mach-bcm/hotplug-brcmstb.c
new file mode 100644
index 0000000..21431a6
--- /dev/null
+++ b/arch/arm/mach-bcm/hotplug-brcmstb.c
@@ -0,0 +1,311 @@
+/*
+ * Broadcom STB CPU hotplug support for ARM
+ *
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/printk.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/mach-types.h>
+#include <asm/smp_plat.h>
+
+#include "brcmstb.h"
+
+enum {
+ ZONE_MAN_CLKEN_MASK = BIT(0),
+ ZONE_MAN_RESET_CNTL_MASK = BIT(1),
+ ZONE_MAN_MEM_PWR_MASK = BIT(4),
+ ZONE_RESERVED_1_MASK = BIT(5),
+ ZONE_MAN_ISO_CNTL_MASK = BIT(6),
+ ZONE_MANUAL_CONTROL_MASK = BIT(7),
+ ZONE_PWR_DN_REQ_MASK = BIT(9),
+ ZONE_PWR_UP_REQ_MASK = BIT(10),
+ ZONE_BLK_RST_ASSERT_MASK = BIT(12),
+ ZONE_PWR_OFF_STATE_MASK = BIT(25),
+ ZONE_PWR_ON_STATE_MASK = BIT(26),
+ ZONE_DPG_PWR_STATE_MASK = BIT(28),
+ ZONE_MEM_PWR_STATE_MASK = BIT(29),
+ ZONE_RESET_STATE_MASK = BIT(31),
+ CPU0_PWR_ZONE_CTRL_REG = 1,
+ CPU_RESET_CONFIG_REG = 2,
+};
+
+static void __iomem *cpubiuctrl_block;
+static void __iomem *hif_cont_block;
+static u32 cpu0_pwr_zone_ctrl_reg;
+static u32 cpu_rst_cfg_reg;
+static u32 hif_cont_reg;
+DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
+
+static int per_cpu_sw_state_rd(u32 cpu)
+{
+ sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
+ return per_cpu(per_cpu_sw_state, cpu);
+}
+
+static void per_cpu_sw_state_wr(u32 cpu, int val)
+{
+ per_cpu(per_cpu_sw_state, cpu) = val;
+ dmb();
+ sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
+ dsb_sev();
+}
+
+static void __iomem *pwr_ctrl_get_base(u32 cpu)
+{
+ void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
+ base += (cpu_logical_map(cpu) * 4);
+ return base;
+}
+
+static u32 pwr_ctrl_rd(u32 cpu)
+{
+ void __iomem *base = pwr_ctrl_get_base(cpu);
+ return readl_relaxed(base);
+}
+
+static void pwr_ctrl_wr(u32 cpu, u32 val)
+{
+ void __iomem *base = pwr_ctrl_get_base(cpu);
+ writel(val, base);
+}
+
+static void cpu_rst_cfg_set(u32 cpu, int set)
+{
+ u32 val;
+ val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
+ if (set)
+ val |= BIT(cpu_logical_map(cpu));
+ else
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
+}
+
+static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
+{
+ const int reg_ofs = cpu_logical_map(cpu) * 8;
+ writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
+ writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
+}
+
+void brcmstb_cpu_boot(u32 cpu)
+{
+ pr_info("SMP: Booting CPU%d...\n", cpu);
+
+ /*
+ * set the reset vector to point to the secondary_startup
+ * routine
+ */
+ cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
+
+ /* unhalt the cpu */
+ cpu_rst_cfg_set(cpu, 0);
+}
+
+void brcmstb_cpu_power_on(u32 cpu)
+{
+ /*
+ * The secondary cores power was cut, so we must go through
+ * power-on initialization.
+ */
+ u32 tmp;
+
+ pr_info("SMP: Powering up CPU%d...\n", cpu);
+
+ /* Request zone power up */
+ pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
+
+ /* Wait for the power up FSM to complete */
+ do {
+ tmp = pwr_ctrl_rd(cpu);
+ } while (!(tmp & ZONE_PWR_ON_STATE_MASK));
+
+ per_cpu_sw_state_wr(cpu, 1);
+}
+
+int brcmstb_cpu_get_power_state(u32 cpu)
+{
+ int tmp = pwr_ctrl_rd(cpu);
+ return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
+}
+
+void __ref brcmstb_cpu_die(u32 cpu)
+{
+ v7_exit_coherency_flush(all);
+
+ /* Prevent all interrupts from reaching this CPU. */
+ arch_local_irq_disable();
+
+ /*
+ * Final full barrier to ensure everything before this instruction has
+ * quiesced.
+ */
+ isb();
+ dsb();
+
+ per_cpu_sw_state_wr(cpu, 0);
+
+ /* Sit and wait to die */
+ wfi();
+
+ /* We should never get here... */
+ panic("Spurious interrupt on CPU %d received!\n", cpu);
+}
+
+int brcmstb_cpu_kill(u32 cpu)
+{
+ u32 tmp;
+
+ pr_info("SMP: Powering down CPU%d...\n", cpu);
+
+ while (per_cpu_sw_state_rd(cpu))
+ ;
+
+ /* Program zone reset */
+ pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
+ ZONE_PWR_DN_REQ_MASK);
+
+ /* Verify zone reset */
+ tmp = pwr_ctrl_rd(cpu);
+ if (!(tmp & ZONE_RESET_STATE_MASK))
+ pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
+ __func__, cpu);
+
+ /* Wait for power down */
+ do {
+ tmp = pwr_ctrl_rd(cpu);
+ } while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
+
+ /* Settle-time from Broadcom-internal DVT reference code */
+ udelay(7);
+
+ /* Assert reset on the CPU */
+ cpu_rst_cfg_set(cpu, 1);
+
+ return 1;
+}
+
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
+{
+ int rc = 0;
+ char *name;
+ struct device_node *syscon_np = NULL;
+
+ name = "syscon-cpu";
+
+ syscon_np = of_parse_phandle(np, name, 0);
+ if (!syscon_np) {
+ pr_err("can't find phandle %s\n", name);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ cpubiuctrl_block = of_iomap(syscon_np, 0);
+ if (!cpubiuctrl_block) {
+ pr_err("iomap failed for cpubiuctrl_block\n");
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
+ &cpu0_pwr_zone_ctrl_reg);
+ if (rc) {
+ pr_err("failed to read 1st entry from %s property (%d)\n", name,
+ rc);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
+ &cpu_rst_cfg_reg);
+ if (rc) {
+ pr_err("failed to read 2nd entry from %s property (%d)\n", name,
+ rc);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+cleanup:
+ if (syscon_np)
+ of_node_put(syscon_np);
+
+ return rc;
+}
+
+static int __init setup_hifcont_regs(struct device_node *np)
+{
+ int rc = 0;
+ char *name;
+ struct device_node *syscon_np = NULL;
+
+ name = "syscon-cont";
+
+ syscon_np = of_parse_phandle(np, name, 0);
+ if (!syscon_np) {
+ pr_err("can't find phandle %s\n", name);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ hif_cont_block = of_iomap(syscon_np, 0);
+ if (!hif_cont_block) {
+ pr_err("iomap failed for hif_cont_block\n");
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ /* offset is at top of hif_cont_block */
+ hif_cont_reg = 0;
+
+cleanup:
+ if (syscon_np)
+ of_node_put(syscon_np);
+
+ return rc;
+}
+
+void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
+{
+ int rc;
+ struct device_node *np;
+ char *name;
+
+ name = "brcm,brcmstb-smpboot";
+ np = of_find_compatible_node(NULL, NULL, name);
+ if (!np) {
+ pr_err("can't find compatible node %s\n", name);
+ return;
+ }
+
+ rc = setup_hifcpubiuctrl_regs(np);
+ if (rc)
+ return;
+
+ rc = setup_hifcont_regs(np);
+ if (rc)
+ return;
+}
+
--
1.7.1
Add the UART definitions needed to support earlyprintk on brcmstb machines.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
arch/arm/Kconfig.debug | 15 ++++++++++++++-
1 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8..5d7f76b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -125,6 +125,17 @@ choice
Say Y here if you want kernel low-level debugging support
on Marvell Berlin SoC based platforms.
+ config DEBUG_BRCMSTB_UART
+ bool "Use BRCMSTB UART for low-level debug"
+ depends on ARCH_BRCMSTB
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the first serial port on these devices.
+
+ If you have a Broadcom STB chip and would like early print
+ messages to appear over the UART, select this option.
+
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -1049,6 +1060,7 @@ config DEBUG_UART_PHYS
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
default 0xf0000be0 if ARCH_EBSA110
+ default 0xf0406b00 if DEBUG_BRCMSTB_UART
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
ARCH_ORION5X
@@ -1083,6 +1095,7 @@ config DEBUG_UART_VIRT
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+ default 0xfc406b00 if DEBUG_BRCMSTB_UART
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
default 0xfd012000 if ARCH_MV78XX0
@@ -1136,7 +1149,7 @@ config DEBUG_UART_8250_WORD
ARCH_KEYSTONE || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
- DEBUG_BCM_KONA_UART
+ DEBUG_BCM_KONA_UART || DEBUG_BRCMSTB_UART
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
--
1.7.1
Perform any CPU-specific initialization required on the
Broadcom Brahma-15 core.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
arch/arm/mm/proc-v7.S | 11 +++++++++++
1 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index bd17819..98ea423 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -193,6 +193,7 @@ __v7_cr7mp_setup:
b 1f
__v7_ca7mp_setup:
__v7_ca15mp_setup:
+__v7_b15mp_setup:
mov r10, #0
1:
#ifdef CONFIG_SMP
@@ -494,6 +495,16 @@ __v7_ca15mp_proc_info:
.size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
/*
+ * Broadcom Corporation Brahma-B15 processor.
+ */
+ .type __v7_b15mp_proc_info, #object
+__v7_b15mp_proc_info:
+ .long 0x420f00f0
+ .long 0xff0ffff0
+ __v7_proc __v7_b15mp_setup, hwcaps = HWCAP_IDIV
+ .size __v7_b15mp_proc_info, . - __v7_b15mp_proc_info
+
+ /*
* Qualcomm Inc. Krait processors.
*/
.type __krait_proc_info, #object
--
1.7.1
Document the bindings that the Broadcom STB platform needs
for proper bootup.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
.../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++++++++++++++++
1 files changed, 95 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
new file mode 100644
index 0000000..3c436cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+ - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Broadcom STB (bcm7445)";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+ - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+ - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x00 0xf0000000 0x1000000>;
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ };
+
+ hif_cpubiuctrl: syscon@3e2400 {
+ compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+ reg = <0x3e2400 0x5b4>;
+ };
+
+ hif_continuation: syscon@452000 {
+ compatible = "brcm,bcm7445-hif-continuation", "syscon";
+ reg = <0x452000 0x100>;
+ };
+ };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+ - compatible
+ The string "brcm,brcmstb-smpboot".
+
+ - syscon-cpu
+ A phandle / integer array property which lets the BSP know the location
+ of certain CPU power-on registers.
+
+ The layout of the property is as follows:
+ o a phandle to the "hif_cpubiuctrl" syscon node
+ o offset to the base CPU power zone register
+ o offset to the base CPU reset register
+
+ - syscon-cont
+ A phandle pointing to the syscon node which describes the CPU boot
+ continuation registers.
+ o a phandle to the "hif_continuation" syscon node
+
+example:
+ smpboot {
+ compatible = "brcm,brcmstb-smpboot";
+ syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+ syscon-cont = <&hif_continuation>;
+ };
+
+reboot
+-------
+Required properties
+
+ - compatible
+ The string property "brcm,brcmstb-reboot".
+
+ - syscon
+ A phandle / integer array that points to the syscon node which describes
+ the general system reset registers.
+ o a phandle to "sun_top_ctrl"
+ o offset to the "reset source enable" register
+ o offset to the "software master reset" register
+
+example:
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
--
1.7.1
Add a sample DTS which will allow bootup of a board populated
with the BCM7445 chip.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
arch/arm/boot/dts/bcm7445.dts | 111 +++++++++++++++++++++++++++++++++++++++++
1 files changed, 111 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm7445.dts
diff --git a/arch/arm/boot/dts/bcm7445.dts b/arch/arm/boot/dts/bcm7445.dts
new file mode 100644
index 0000000..ffa3305
--- /dev/null
+++ b/arch/arm/boot/dts/bcm7445.dts
@@ -0,0 +1,111 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Broadcom STB (bcm7445)";
+ compatible = "brcm,bcm7445", "brcm,brcmstb";
+ interrupt-parent = <&gic>;
+
+ chosen {};
+
+ memory {
+ device_type = "memory";
+ reg = <0x00 0x00000000 0x00 0x40000000>,
+ <0x00 0x40000000 0x00 0x40000000>,
+ <0x00 0x80000000 0x00 0x40000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "brcm,brahma-b15";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ gic: interrupt-controller@ffd00000 {
+ compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
+ reg = <0x00 0xffd01000 0x00 0x1000>,
+ <0x00 0xffd02000 0x00 0x2000>,
+ <0x00 0xffd04000 0x00 0x2000>,
+ <0x00 0xffd06000 0x00 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0x00 0xf0000000 0x1000000>;
+
+ serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <0 75 0x4>;
+ clock-frequency = <0x4d3f640>;
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7445-sun-top-ctrl",
+ "syscon";
+ reg = <0x404000 0x51c>;
+ };
+
+ hif_cpubiuctrl: syscon@3e2400 {
+ compatible = "brcm,bcm7445-hif-cpubiuctrl",
+ "syscon";
+ reg = <0x3e2400 0x5b4>;
+ };
+
+ hif_continuation: syscon@452000 {
+ compatible = "brcm,bcm7445-hif-continuation",
+ "syscon";
+ reg = <0x452000 0x100>;
+ };
+ };
+
+ smpboot {
+ compatible = "brcm,brcmstb-smpboot";
+ syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+ syscon-cont = <&hif_continuation>;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+};
--
1.7.1
Add the Broadcom Brahma B15 CPU to the DT CPU binding list.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 9130435..0cd1e25 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -163,6 +163,7 @@ nodes to be present and contain the properties described below.
"arm,cortex-r4"
"arm,cortex-r5"
"arm,cortex-r7"
+ "brcm,brahma-b15"
"faraday,fa526"
"intel,sa110"
"intel,sa1100"
--
1.7.1
Document the Broadcom Brahma B15 GIC implementation as compatible
with the ARM GIC standard.
Signed-off-by: Marc Carino <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
---
Documentation/devicetree/bindings/arm/gic.txt | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index bae0d87..d1f0b98 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -16,6 +16,7 @@ Main node required properties:
"arm,cortex-a9-gic"
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
+ "brcm,brahma-b15-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
--
1.7.1
Add support for reboot functionality on boards with ARM-based
Broadcom STB chipsets.
Signed-off-by: Marc Carino <[email protected]>
---
arch/arm/mach-bcm/Kconfig | 1 +
drivers/power/reset/Kconfig | 10 +++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/brcmstb-reboot.c | 120 ++++++++++++++++++++++++++++++++++
4 files changed, 132 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/reset/brcmstb-reboot.c
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index f85e7bc..d8f6d7a 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -39,6 +39,7 @@ config ARCH_BRCMSTB
select MIGHT_HAVE_PCI
select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
+ select POWER_RESET_BRCMSTB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6d452a7..c886505 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -12,6 +12,16 @@ config POWER_RESET_AS3722
help
This driver supports turning off board via a ams AS3722 power-off.
+config POWER_RESET_BRCMSTB
+ bool "Broadcom STB reset driver"
+ depends on POWER_RESET && ARCH_BRCMSTB
+ help
+ This driver provides restart support for ARM-based Broadcom STB
+ boards.
+
+ Say Y here if you have an ARM-based Broadcom STB board and you wish
+ to have restart support.
+
config POWER_RESET_GPIO
bool "GPIO power-off driver"
depends on OF_GPIO && POWER_RESET
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a5b4a77..72bb94f 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
+obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
diff --git a/drivers/power/reset/brcmstb-reboot.c b/drivers/power/reset/brcmstb-reboot.c
new file mode 100644
index 0000000..3f23692
--- /dev/null
+++ b/drivers/power/reset/brcmstb-reboot.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/system_misc.h>
+
+#define RESET_SOURCE_ENABLE_REG 1
+#define SW_MASTER_RESET_REG 2
+
+static struct regmap *regmap;
+static u32 rst_src_en;
+static u32 sw_mstr_rst;
+
+static void brcmstb_reboot(enum reboot_mode mode, const char *cmd)
+{
+ int rc;
+ u32 tmp;
+
+ rc = regmap_write(regmap, rst_src_en, 1);
+ if (rc) {
+ pr_err("failed to write rst_src_en (%d)\n", rc);
+ return;
+ }
+
+ rc = regmap_read(regmap, rst_src_en, &tmp);
+ if (rc) {
+ pr_err("failed to read rst_src_en (%d)\n", rc);
+ return;
+ }
+
+ rc = regmap_write(regmap, sw_mstr_rst, 1);
+ if (rc) {
+ pr_err("failed to write sw_mstr_rst (%d)\n", rc);
+ return;
+ }
+
+ rc = regmap_read(regmap, sw_mstr_rst, &tmp);
+ if (rc) {
+ pr_err("failed to read sw_mstr_rst (%d)\n", rc);
+ return;
+ }
+
+ while (1)
+ ;
+}
+
+static int brcmstb_reboot_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct device_node *np = pdev->dev.of_node;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(regmap)) {
+ pr_err("failed to get syscon phandle\n");
+ return -EINVAL;
+ }
+
+ rc = of_property_read_u32_index(np, "syscon", RESET_SOURCE_ENABLE_REG,
+ &rst_src_en);
+ if (rc) {
+ pr_err("can't get rst_src_en offset (%d)\n", rc);
+ return -EINVAL;
+ }
+
+ rc = of_property_read_u32_index(np, "syscon", SW_MASTER_RESET_REG,
+ &sw_mstr_rst);
+ if (rc) {
+ pr_err("can't get sw_mstr_rst offset (%d)\n", rc);
+ return -EINVAL;
+ }
+
+ arm_pm_restart = brcmstb_reboot;
+
+ return 0;
+}
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "brcm,brcmstb-reboot", },
+ {},
+};
+
+static struct platform_driver brcmstb_reboot_driver = {
+ .probe = brcmstb_reboot_probe,
+ .driver = {
+ .name = "brcmstb-reboot",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match,
+ },
+};
+
+static int __init brcmstb_reboot_init(void)
+{
+ return platform_driver_probe(&brcmstb_reboot_driver,
+ brcmstb_reboot_probe);
+}
+subsys_initcall(brcmstb_reboot_init);
--
1.7.1
Matt,
2014-02-03 13:30 GMT-08:00 Marc Carino <[email protected]>:
> This patchset contains the board support package for the
> Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
> minimal set of code needed for a BCM7445-based board to boot
> the Linux kernel.
If you are happy with this round of changes, can you also carry those
patches in your tree for 3.15?
>
> These changes heavily leverage the OF/devicetree framework.
>
> v6:
> - rebased to v3.14-rc1
> - utilize common APIs for handling CPU power-down
> - drop deprecated __cpuinit attributes
>
> v5 (https://lkml.org/lkml/2014/1/21/640):
> - rebased to v3.13 tag
> - make UART DT node a child of 'rdb' node
> - fix ordering of debug UART entries
>
> v4 (https://lkml.org/lkml/2014/1/17/455):
> - make a reboot driver and put it in the drivers folder
> - rework DT bindings to leverage 'syscon'
> - rework BSP code to use 'syscon' for all register mappings
> - misc. tweaks per suggestions from v3
>
> v3 (https://lkml.org/lkml/2014/1/14/696):
> - rebased to v3.13-rc8
> - switched to using 'multi_v7_defconfig'
> - eliminated dependence on compile-time peripheral register access
> - moved DT node iomap out from 'init_early'
> - misc. minor cleanups from mailing-list discussion for v2
>
> v2 (https://lkml.org/lkml/2013/11/26/570):
> - rebased to v3.13-rc1
> - moved implementation to 'mach-bcm' folder
> - added CPU init for B16RM
>
> v1:
> - initial submission
>
> [1] http://www.broadcom.com/products/Cable/Cable-Set-Top-Box-Solutions/BCM7445
>
> Marc Carino (8):
> ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
> power: reset: Add reboot driver for brcmstb
> ARM: brcmstb: add debug UART for earlyprintk support
> ARM: do CPU-specific init for Broadcom Brahma15 cores
> ARM: brcmstb: add CPU binding for Broadcom Brahma15
> ARM: brcmstb: add misc. DT bindings for brcmstb
> ARM: brcmstb: gic: add compatible string for Broadcom Brahma15
> ARM: brcmstb: dts: add a reference DTS for Broadcom 7445
>
> .../devicetree/bindings/arm/brcm-brcmstb.txt | 95 ++++++
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> Documentation/devicetree/bindings/arm/gic.txt | 1 +
> arch/arm/Kconfig.debug | 15 +-
> arch/arm/boot/dts/bcm7445.dts | 111 +++++++
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/mach-bcm/Kconfig | 15 +
> arch/arm/mach-bcm/Makefile | 4 +
> arch/arm/mach-bcm/brcmstb.c | 104 +++++++
> arch/arm/mach-bcm/brcmstb.h | 38 +++
> arch/arm/mach-bcm/headsmp-brcmstb.S | 33 ++
> arch/arm/mach-bcm/hotplug-brcmstb.c | 311 ++++++++++++++++++++
> arch/arm/mm/proc-v7.S | 11 +
> drivers/power/reset/Kconfig | 10 +
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/brcmstb-reboot.c | 120 ++++++++
> 16 files changed, 870 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
> create mode 100644 arch/arm/boot/dts/bcm7445.dts
> create mode 100644 arch/arm/mach-bcm/brcmstb.c
> create mode 100644 arch/arm/mach-bcm/brcmstb.h
> create mode 100644 arch/arm/mach-bcm/headsmp-brcmstb.S
> create mode 100644 arch/arm/mach-bcm/hotplug-brcmstb.c
> create mode 100644 drivers/power/reset/brcmstb-reboot.c
>
--
Florian
On Mon, Feb 03, 2014 at 01:30:41PM -0800, Marc Carino wrote:
> Add a sample DTS which will allow bootup of a board populated
> with the BCM7445 chip.
>
> Signed-off-by: Marc Carino <[email protected]>
> Acked-by: Florian Fainelli <[email protected]>
> ---
> arch/arm/boot/dts/bcm7445.dts | 111 +++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 111 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/boot/dts/bcm7445.dts
Looking forward, I suspect you are going to have to move to a
bcm7445.dtsi with your board specific implementations in something like
bcm7445-myrefbrd.dts. It's probably better to split this now to
encourage inclusion of the common SoC nodes from the board specific
dts. Since it's not abstracted this way it'll encourage people to just
copy the entire bcm7445.dts for their board.
> diff --git a/arch/arm/boot/dts/bcm7445.dts b/arch/arm/boot/dts/bcm7445.dts
> new file mode 100644
> index 0000000..ffa3305
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm7445.dts
> @@ -0,0 +1,111 @@
> +/dts-v1/;
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "Broadcom STB (bcm7445)";
> + compatible = "brcm,bcm7445", "brcm,brcmstb";
> + interrupt-parent = <&gic>;
> +
> + chosen {};
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00 0x00000000 0x00 0x40000000>,
> + <0x00 0x40000000 0x00 0x40000000>,
> + <0x00 0x80000000 0x00 0x40000000>;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "brcm,brahma-b15";
> + device_type = "cpu";
> + reg = <0>;
> + };
> +
> + cpu@1 {
> + compatible = "brcm,brahma-b15";
> + device_type = "cpu";
> + reg = <1>;
> + };
> +
> + cpu@2 {
> + compatible = "brcm,brahma-b15";
> + device_type = "cpu";
> + reg = <2>;
> + };
> +
> + cpu@3 {
> + compatible = "brcm,brahma-b15";
> + device_type = "cpu";
> + reg = <3>;
> + };
> + };
> +
> + gic: interrupt-controller@ffd00000 {
> + compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
> + reg = <0x00 0xffd01000 0x00 0x1000>,
> + <0x00 0xffd02000 0x00 0x2000>,
> + <0x00 0xffd04000 0x00 0x2000>,
> + <0x00 0xffd06000 0x00 0x2000>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 13 0xf08>,
> + <1 14 0xf08>,
> + <1 11 0xf08>,
> + <1 10 0xf08>;
These should leverage the preprocessor defines that are available
e.g.
interrupts = <GIC_PPI 13 GIC_CPU_MASK_RAW(15)|IRQ_TYPE_LEVEL_LOW>,
...
> + };
> +
> + rdb {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + ranges = <0 0x00 0xf0000000 0x1000000>;
> +
> + serial@406b00 {
> + compatible = "ns16550a";
> + reg = <0x406b00 0x20>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <0 75 0x4>;
same here:
interrupt = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-Matt
On Thu, Feb 20, 2014 at 04:41:32PM -0800, Florian Fainelli wrote:
> Matt,
>
> 2014-02-03 13:30 GMT-08:00 Marc Carino <[email protected]>:
> > This patchset contains the board support package for the
> > Broadcom BCM7445 ARM-based SoC [1]. These changes contain a
> > minimal set of code needed for a BCM7445-based board to boot
> > the Linux kernel.
>
> If you are happy with this round of changes, can you also carry those
> patches in your tree for 3.15?
I had to add a couple trivial comments on the dts that I missed back in
v2.
More importantly, you'll need to collect some acks on various pieces. In
particular the power/reset driver needs a maintainer ack to go in via
arm-soc. I'd also like to see an ack from Arnd since he provided a lot
of the comments. Also, we need Russell's ack on the debug and proc-v7.S
patches.
I'll note that the drivers/power maintainers aren't cced on this posting
so they probably didn't notice that driver.
-Matt