"to support for" is incorrect English in here, hence the change to "to add
support".
Signed-off-by: Laszlo Papp <[email protected]>
---
drivers/mfd/Kconfig | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 4ad39f4..0bce1ad 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -100,7 +100,7 @@ config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help
- Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
+ Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
usually found on PXA processors-based platforms. This includes
the I2C driver and the core APIs _only_, you have to select
@@ -324,7 +324,7 @@ config MFD_MAX14577
select REGMAP_I2C
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX14577.
+ Say yes here to add support for Maxim Semiconductor MAX14577.
This is a Micro-USB IC with Charger controls on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
@@ -337,7 +337,7 @@ config MFD_MAX77686
select REGMAP_I2C
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX77686.
+ Say yes here to add support for Maxim Semiconductor MAX77686.
This is a Power Management IC with RTC on chip.
This driver provides common support for accessing the device;
additional drivers must be enabled in order to use the functionality
@@ -349,7 +349,7 @@ config MFD_MAX77693
select MFD_CORE
select REGMAP_I2C
help
- Say yes here to support for Maxim Semiconductor MAX77693.
+ Say yes here to add support for Maxim Semiconductor MAX77693.
This is a companion Power Management IC with Flash, Haptic, Charger,
and MUIC(Micro USB Interface Controller) controls on chip.
This driver provides common support for accessing the device;
@@ -363,7 +363,7 @@ config MFD_MAX8907
select REGMAP_I2C
select REGMAP_IRQ
help
- Say yes here to support for Maxim Semiconductor MAX8907. This is
+ Say yes here to add support for Maxim Semiconductor MAX8907. This is
a Power Management IC. This driver provides common support for
accessing the device; additional drivers must be enabled in order
to use the functionality of the device.
@@ -374,17 +374,17 @@ config MFD_MAX665X
depends on I2C
select REGMAP_I2C
help
- Say yes here to support for Maxim Semiconductor MAX6650/MAX6651. This is
- a fan speed regulator and monitor IC. This driver provides common support
- for accessing the device, additional drivers must be enabled in order to
- use the functionality of the device.
+ Say yes here to add support for Maxim Semiconductor MAX6650/MAX6651. This
+ is a fan speed regulator and monitor IC. This driver provides common
+ support for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
config MFD_MAX8925
bool "Maxim Semiconductor MAX8925 PMIC Support"
depends on I2C=y
select MFD_CORE
help
- Say yes here to support for Maxim Semiconductor MAX8925. This is
+ Say yes here to add support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
@@ -395,7 +395,7 @@ config MFD_MAX8997
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8997/8966.
+ Say yes here to add support for Maxim Semiconductor MAX8997/8966.
This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
MUIC controls on chip.
This driver provides common support for accessing the device;
@@ -408,7 +408,7 @@ config MFD_MAX8998
select MFD_CORE
select IRQ_DOMAIN
help
- Say yes here to support for Maxim Semiconductor MAX8998 and
+ Say yes here to add support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
--
1.8.5.4