From: "Ivan T. Ivanov" <[email protected]>
The Qualcomm Universal Peripheral (QUP) core is an
AHB slave that provides a common data path (an output
FIFO and an input FIFO) for serial peripheral interface
(SPI) mini-core.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
.../devicetree/bindings/spi/qcom,spi-qup.txt | 85 ++++++++++++++++++++
1 file changed, 85 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
new file mode 100644
index 0000000..b82a268
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -0,0 +1,85 @@
+Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP core is an AHB slave that provides a common data path (an output FIFO
+and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+data path from 4 bits to 32 bits and numerous protocol variants.
+
+Required properties:
+- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1"
+- reg: Should contain base register location and length
+- interrupts: Interrupt number used by this controller
+
+- clocks: Should contain the core clock and the AHB clock.
+- clock-names: Should be "core" for the core clock and "iface" for the
+ AHB clock.
+
+- #address-cells: Number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency,
+ Units - Hz. Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+SPI slave nodes must be children of the SPI master node and can contain
+properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ spi_8: spi@f9964000 { /* BLSP2 QUP2 */
+
+ compatible = "qcom,spi-qup-v2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf9964000 0x1000>;
+ interrupts = <0 102 0>;
+ spi-max-frequency = <19200000>;
+
+ clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi8_default>;
+
+ device@0 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ };
+
+ device@1 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>; /* Chip select 1 */
+ spi-max-frequency = <9600000>;
+ spi-cpha;
+ };
+
+ device@2 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2>; /* Chip select 2 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ spi-cpha;
+ };
+
+ device@3 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <3>; /* Chip select 3 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ spi-cpha;
+ spi-cs-high;
+ };
+ };
--
1.7.9.5