This series contains some code consolidation for the Broadcom BCM281xx
family of SoCs.
- Move kona_l2_cache_init() so other platforms can reuse it
- Consolidate reboot code and move it to the board specific file
- Sort header files in board file alphabetically
- Rename the board_init() function to be board specific
Markus Mayer (4):
ARM: bcm281xx: Move kona_l2_cache_init() so it can be shared
ARM: bcm281xx: Consolidate reboot code
ARM: bcm281xx: Re-order hearder files
ARM: bcm281xx: Rename board_init() function
arch/arm/mach-bcm/board_bcm281xx.c | 74 ++++++++++++++++++------------------
arch/arm/mach-bcm/kona.c | 64 ++++++++++---------------------
arch/arm/mach-bcm/kona.h | 7 +---
3 files changed, 59 insertions(+), 86 deletions(-)
--
1.7.9.5
In preparation for future SoCs, move kona_l2_cache_init() from board
specific board_bcm281xx.c to shared kona.c, so multiple SoC families
can make use of it. Also change the return type to "void", since we
never look at the return code anyway.
Signed-off-by: Markus Mayer <[email protected]>
---
arch/arm/mach-bcm/board_bcm281xx.c | 26 +-------------------------
arch/arm/mach-bcm/kona.c | 30 +++++++++++++++++++++++++++++-
arch/arm/mach-bcm/kona.h | 3 ++-
3 files changed, 32 insertions(+), 27 deletions(-)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index cb3dc36..4874f56 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -12,37 +12,13 @@
*/
#include <linux/of_platform.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
+#include <linux/of_address.h>
#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include "bcm_kona_smc.h"
#include "kona.h"
-static int __init kona_l2_cache_init(void)
-{
- if (!IS_ENABLED(CONFIG_CACHE_L2X0))
- return 0;
-
- if (bcm_kona_smc_init() < 0) {
- pr_info("Kona secure API not available. Skipping L2 init\n");
- return 0;
- }
-
- bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
-
- /*
- * The aux_val and aux_mask have no effect since L2 cache is already
- * enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
- */
- return l2x0_of_init(0, ~0);
-}
-
static void bcm_board_setup_restart(void)
{
struct device_node *np;
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
index 6939d90..2f1db29 100644
--- a/arch/arm/mach-bcm/kona.c
+++ b/arch/arm/mach-bcm/kona.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -12,10 +12,38 @@
*/
#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/io.h>
+#include "bcm_kona_smc.h"
#include "kona.h"
+void __init kona_l2_cache_init(void)
+{
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_CACHE_L2X0))
+ return;
+
+ ret = bcm_kona_smc_init();
+ if (ret) {
+ pr_info("Secure API not available (%d). Skipping L2 init.\n",
+ ret);
+ return;
+ }
+
+ bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
+
+ /*
+ * The aux_val and aux_mask have no effect since L2 cache is already
+ * enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
+ */
+ ret = l2x0_of_init(0, ~0);
+ if (ret)
+ pr_err("Couldn't enable L2 cache: %d\n", ret);
+}
+
static void __iomem *watchdog_base;
void bcm_kona_setup_restart(void)
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h
index 291eca3..f42aef8 100644
--- a/arch/arm/mach-bcm/kona.h
+++ b/arch/arm/mach-bcm/kona.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -13,5 +13,6 @@
#include <linux/reboot.h>
+void __init kona_l2_cache_init(void);
void bcm_kona_setup_restart(void);
void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
--
1.7.9.5
Consolidate reboot code and remove unnecessary functions.
Signed-off-by: Markus Mayer <[email protected]>
---
arch/arm/mach-bcm/board_bcm281xx.c | 46 ++++++++++++++++++++++++---------
arch/arm/mach-bcm/kona.c | 50 ------------------------------------
arch/arm/mach-bcm/kona.h | 4 ---
3 files changed, 34 insertions(+), 66 deletions(-)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index 4874f56..e0d0bc5e 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012-2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,25 +19,47 @@
#include "kona.h"
-static void bcm_board_setup_restart(void)
+#define SECWDOG_OFFSET 0x00000000
+#define SECWDOG_RESERVED_MASK 0xe2000000
+#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
+#define SECWDOG_EN_MASK 0x08000000
+#define SECWDOG_SRSTEN_MASK 0x04000000
+#define SECWDOG_CLKS_SHIFT 20
+#define SECWDOG_COUNT_SHIFT 0
+
+static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
{
- struct device_node *np;
+ uint32_t val;
+ void __iomem *base;
+ struct device_node *np_wdog;
- np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
- if (np) {
- if (of_device_is_available(np))
- bcm_kona_setup_restart();
- of_node_put(np);
+ np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
+ if (!np_wdog) {
+ pr_emerg("Couldn't find brcm,kona-wdt\n");
+ return;
+ }
+ base = of_iomap(np_wdog, 0);
+ if (!base) {
+ pr_emerg("Couldn't map brcm,kona-wdt\n");
+ return;
}
- /* Restart setup for other boards goes here */
+
+ /* Enable watchdog with short timeout (244us). */
+ val = readl(base + SECWDOG_OFFSET);
+ val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
+ val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
+ (0x15 << SECWDOG_CLKS_SHIFT) |
+ (0x8 << SECWDOG_COUNT_SHIFT);
+ writel(val, base + SECWDOG_OFFSET);
+
+ /* Wait for reset */
+ while (1);
}
static void __init board_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
-
- bcm_board_setup_restart();
kona_l2_cache_init();
}
@@ -45,6 +67,6 @@ static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
.init_machine = board_init,
- .restart = bcm_kona_restart,
+ .restart = bcm281xx_restart,
.dt_compat = bcm11351_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
index 2f1db29..768bc28 100644
--- a/arch/arm/mach-bcm/kona.c
+++ b/arch/arm/mach-bcm/kona.c
@@ -11,10 +11,8 @@
* GNU General Public License for more details.
*/
-#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/hardware/cache-l2x0.h>
-#include <asm/io.h>
#include "bcm_kona_smc.h"
#include "kona.h"
@@ -43,51 +41,3 @@ void __init kona_l2_cache_init(void)
if (ret)
pr_err("Couldn't enable L2 cache: %d\n", ret);
}
-
-static void __iomem *watchdog_base;
-
-void bcm_kona_setup_restart(void)
-{
- struct device_node *np_wdog;
-
- /*
- * The assumption is that whoever calls bcm_kona_setup_restart()
- * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
- * report an error if the DT entry is missing.
- */
- np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
- if (!np_wdog) {
- pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
- return;
- }
- watchdog_base = of_iomap(np_wdog, 0);
- WARN(!watchdog_base, "failed to map watchdog base");
- of_node_put(np_wdog);
-}
-
-#define SECWDOG_OFFSET 0x00000000
-#define SECWDOG_RESERVED_MASK 0xE2000000
-#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
-#define SECWDOG_EN_MASK 0x08000000
-#define SECWDOG_SRSTEN_MASK 0x04000000
-#define SECWDOG_CLKS_SHIFT 20
-#define SECWDOG_LOCK_SHIFT 0
-
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
-{
- uint32_t val;
-
- if (!watchdog_base)
- panic("Watchdog not mapped. Reboot failed.\n");
-
- /* Enable watchdog2 with very short timeout. */
- val = readl(watchdog_base + SECWDOG_OFFSET);
- val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
- val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
- (0x8 << SECWDOG_CLKS_SHIFT) |
- (0x8 << SECWDOG_LOCK_SHIFT);
- writel(val, watchdog_base + SECWDOG_OFFSET);
-
- while (1)
- ;
-}
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h
index f42aef8..3a7a017 100644
--- a/arch/arm/mach-bcm/kona.h
+++ b/arch/arm/mach-bcm/kona.h
@@ -11,8 +11,4 @@
* GNU General Public License for more details.
*/
-#include <linux/reboot.h>
-
void __init kona_l2_cache_init(void);
-void bcm_kona_setup_restart(void);
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
--
1.7.9.5
Re-order header files alphabetically.
Signed-off-by: Markus Mayer <[email protected]>
---
arch/arm/mach-bcm/board_bcm281xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index e0d0bc5e..fe00ff3 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -11,9 +11,9 @@
* GNU General Public License for more details.
*/
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <asm/mach/arch.h>
--
1.7.9.5
Rename board_init() to bcm281xx_init(), so the name reflects the board
specific nature of this function.
Signed-off-by: Markus Mayer <[email protected]>
---
arch/arm/mach-bcm/board_bcm281xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index fe00ff3..8fee05b 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -56,7 +56,7 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
while (1);
}
-static void __init board_init(void)
+static void __init bcm281xx_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
@@ -66,7 +66,7 @@ static void __init board_init(void)
static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
- .init_machine = board_init,
+ .init_machine = bcm281xx_init,
.restart = bcm281xx_restart,
.dt_compat = bcm11351_dt_compat,
MACHINE_END
--
1.7.9.5